All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	Steve Longerbeam <steve_longerbeam@mentor.com>
Subject: Re: [PATCH v2] media: i2c: adv748x: Use devm to allocate the device struct
Date: Mon, 14 Jan 2019 13:15:10 +0000	[thread overview]
Message-ID: <061caa6f-6a8f-8f1c-fe19-c9b778fcabb1@ideasonboard.com> (raw)
In-Reply-To: <20190114130622.GE30160@bigcity.dyn.berto.se>

Hi Niklas,

On 14/01/2019 13:06, Niklas Söderlund wrote:
> Hi Kieran,
> 
> Thanks for your work.
> 
> On 2019-01-11 16:17:03 +0000, Kieran Bingham wrote:
>> From: Steve Longerbeam <steve_longerbeam@mentor.com>
>>
>> Switch to devm_kzalloc() when allocating the adv748x device struct.
>>
>> The sizeof() is updated to determine the correct allocation size from
>> the dereferenced pointer type rather than hardcoding the struct type.
> 
> I would put this under a changes since v1 section and not for inclusion 
> on the commit message upstream. Apart from that

I considered that, but this is an actual change as well as the
s/kzalloc/devm_kzalloc/ on top of the existing code - so I felt it was
worthy of keeping in the changelog.

(The original code uses sizeof(struct...) instead of sizeof(*s))

> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Thanks

Kieran


> 
>>
>> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
>> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>> [Kieran: Change sizeof() to dereference the pointer type]
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>> ---
>>  drivers/media/i2c/adv748x/adv748x-core.c | 5 +----
>>  1 file changed, 1 insertion(+), 4 deletions(-)
>>
>> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
>> index 060d0c5b4989..1e5c7bbcf6b2 100644
>> --- a/drivers/media/i2c/adv748x/adv748x-core.c
>> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
>> @@ -674,7 +674,7 @@ static int adv748x_probe(struct i2c_client *client,
>>  	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
>>  		return -EIO;
>>  
>> -	state = kzalloc(sizeof(struct adv748x_state), GFP_KERNEL);
>> +	state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
>>  	if (!state)
>>  		return -ENOMEM;
>>  
>> @@ -772,7 +772,6 @@ static int adv748x_probe(struct i2c_client *client,
>>  	adv748x_dt_cleanup(state);
>>  err_free_mutex:
>>  	mutex_destroy(&state->mutex);
>> -	kfree(state);
>>  
>>  	return ret;
>>  }
>> @@ -791,8 +790,6 @@ static int adv748x_remove(struct i2c_client *client)
>>  	adv748x_dt_cleanup(state);
>>  	mutex_destroy(&state->mutex);
>>  
>> -	kfree(state);
>> -
>>  	return 0;
>>  }
>>  
>> -- 
>> 2.17.1
>>
> 


      reply	other threads:[~2019-01-14 13:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-11 16:17 [PATCH v2] media: i2c: adv748x: Use devm to allocate the device struct Kieran Bingham
2019-01-14 13:06 ` Niklas Söderlund
2019-01-14 13:15   ` Kieran Bingham [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=061caa6f-6a8f-8f1c-fe19-c9b778fcabb1@ideasonboard.com \
    --to=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=steve_longerbeam@mentor.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.