[U-Boot-Users] [PATCH 1/2] Add DO_SYNC at the end of flash_write_cmd

[Haiying Wang <r54964@freescale.com>]

Make sure the flash write command is fully finished and remove the unnecessary ssync operation which should be moved to it CPU header file

Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
---
 drivers/cfi_flash.c |   15 +++------------
 1 files changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index 696f9a4..c686e53 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -931,27 +931,18 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset
 		debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr.cp, cmd,
 		       cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 		*addr.cp = cword.c;
-#ifdef CONFIG_BLACKFIN
-		asm("ssync;");
-#endif
 		break;
 	case FLASH_CFI_16BIT:
 		debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr.wp,
 		       cmd, cword.w,
 		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 		*addr.wp = cword.w;
-#ifdef CONFIG_BLACKFIN
-		asm("ssync;");
-#endif
 		break;
 	case FLASH_CFI_32BIT:
 		debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr.lp,
 		       cmd, cword.l,
 		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 		*addr.lp = cword.l;
-#ifdef CONFIG_BLACKFIN
-		asm("ssync;");
-#endif
 		break;
 	case FLASH_CFI_64BIT:
 #ifdef DEBUG
@@ -966,11 +957,11 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset
 		}
 #endif
 		*addr.llp = cword.ll;
-#ifdef CONFIG_BLACKFIN
-		asm("ssync;");
-#endif
 		break;
 	}
+
+	/* Ensure all the instruction are finished */
+	DO_SYNC;
 }
 
 static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
-- 
1.4.4.4