Linux version 2.6.21-rc5 (hawk@janne) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT Sun Apr 1 14:54:51 CEST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000007fe80000 end: 000000007ff80000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007ff80000 size: 000000000000e000 end: 000000007ff8e000 type: 3 copy_e820_map() start: 000000007ff8e000 size: 0000000000052000 end: 000000007ffe0000 type: 4 copy_e820_map() start: 000000007ffe0000 size: 0000000000020000 end: 0000000080000000 type: 2 copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff80000 (usable) BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data) BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 524160) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524160 early_node_map[1] active PFN ranges 0: 0 -> 524160 On node 0 totalpages: 524160 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2303 pages used for memmap HighMem zone: 292481 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP 000FAF20, 0014 (r0 ACPIAM) ACPI: RSDT 7FF80000, 0044 (r1 NEC 3000707 MSFT 97) ACPI: FACP 7FF80200, 0081 (r1 A_M_I_ OEMFACP 3000707 MSFT 97) ACPI: DSDT 7FF80590, 9560 (r1 A0543 A0543000 0 INTL 20060113) ACPI: FACS 7FF8E000, 0040 ACPI: APIC 7FF80390, 0080 (r1 A_M_I_ OEMAPIC 3000707 MSFT 97) ACPI: SLIC 7FF80410, 0176 (r1 NEC 3000707 MSFT 97) ACPI: OEMB 7FF8E040, 0066 (r1 A_M_I_ AMI_OEM 3000707 MSFT 97) ACPI: HPET 7FF89AF0, 0038 (r1 A_M_I_ OEMHPET 3000707 MSFT 97) ACPI: MCFG 7FF89B30, 003C (r1 A_M_I_ OEMMCFG 3000707 MSFT 97) ACPI: SSDT 7FF8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) ACPI: SSDT 7FF8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000) Built 1 zonelists. Total pages: 520065 Kernel command line: root=/dev/hde2 ro irqpoll Misrouted IRQ fixup and polling support enabled This may significantly impact system performance mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2404.249 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2070604k/2096640k available (1679k kernel code, 24756k reserved, 668k data, 212k init, 1179136k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0351000 - 0xc0386000 ( 212 kB) .data : 0xc02a3c5d - 0xc034af74 ( 668 kB) .text : 0xc0100000 - 0xc02a3c5d (1679 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 4818.55 BogoMIPS (lpj=9637112) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4808.24 BogoMIPS (lpj=9616482) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Total of 2 processors activated (9626.79 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 APIC calibration not consistent with PM Timer: 96ms instead of 100ms APIC delta adjusted to PM-Timer: 1669519 (1618826) checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=27 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO 0000:00:1f.1: trying to change BAR0 from 0000 to 01F0 0000:00:1f.1: trying to change BAR1 from 0000 to 03F4 0000:00:1f.1: trying to change BAR2 from 0000 to 0170 0000:00:1f.1: trying to change BAR3 from 0000 to 0374 Boot video device is 0000:04:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved pnp: 00:06: ioport range 0x290-0x297 has been reserved pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved pnp: 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: faa00000-feafffff PREFETCH window: cff00000-efefffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: cfe00000-cfefffff PCI: Bridge: 0000:00:1c.5 IO window: b000-bfff MEM window: fa900000-fa9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: a000-afff MEM window: fa800000-fa8fffff PREFETCH window: c7e00000-cfdfffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 4594k freed audit: initializing netlink socket (disabled) audit(1175442775.832:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Freeing unused kernel memory: 212k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - DB, should be DA [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node c20f5888), AE_ALREADY_EXISTS ACPI: Marking method _OSC as Serialized ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node c20f589c), AE_ALREADY_EXISTS ACPI: Marking method _PDC as Serialized ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node c20f57d4), AE_ALREADY_EXISTS ACPI: Marking method _OSC as Serialized ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node c20f57e8), AE_ALREADY_EXISTS ACPI: Marking method _PDC as Serialized ACPI: Processor [CPU2] (supports 8 throttling states) ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx JMB363: IDE controller at PCI slot 0000:02:00.1 ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16 JMB363: chipset revision 2 JMB363: 100% native mode on irq 16 ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub SCSI subsystem initialized usbcore: registered new device driver usb libata version 2.20 loaded. Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. USB Universal Host Controller Interface driver v3.0 ieee1394: Initialized config rom entry `ip1394' hda: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive ide0 at 0xbc00-0xbc07,0xb882 on irq 16 Probing IDE interface ide1... ahci 0000:00:1f.2: version 2.1 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ata1: SATA max UDMA/133 cmd 0xf8850900 ctl 0x00000000 bmdma 0x00000000 irq 220 ata2: SATA max UDMA/133 cmd 0xf8850980 ctl 0x00000000 bmdma 0x00000000 irq 220 ata3: SATA max UDMA/133 cmd 0xf8850a00 ctl 0x00000000 bmdma 0x00000000 irq 220 ata4: SATA max UDMA/133 cmd 0xf8850a80 ctl 0x00000000 bmdma 0x00000000 irq 220 scsi0 : ahci ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-4: ST320430A, 3.11, max UDMA/33 ata1.00: 40079088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: configured for UDMA/33 scsi1 : ahci ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: qc timeout (cmd 0xec) ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata2: port is slow to respond, please be patient (Status 0x80) ata2: port failed to respond (30 secs, Status 0x80) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133 ata2.00: 640 sectors, multi 1: LBA ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST320430A 3.11 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part ata5: SATA max UDMA/133 cmd 0xf8910100 ctl 0x00000000 bmdma 0x00000000 irq 17 ata6: SATA max UDMA/133 cmd 0xf8910180 ctl 0x00000000 bmdma 0x00000000 irq 17 scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 19 SCSI device sda: 40079088 512-byte hdwr sectors (20520 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 40079088 512-byte hdwr sectors (20520 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 640 512-byte hdwr sectors (0 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 640 512-byte hdwr sectors (0 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: unknown partition table sd 1:0:0:0: Attached scsi disk sdb e1000: 0000:01:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:3e:c3:48 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 20 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: ST3250823A, ATA DISK drive hdf: IC35L120AVV207-0, ATA DISK drive ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide3... ACPI: PCI Interrupt 0000:01:01.2[B] -> GSI 23 (level, low) -> IRQ 18 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fa89f800-fa89ffff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 19 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fa89f000-fa89f7ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000e480 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000e880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ec00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfebffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hde: max request size: 512KiB hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) hde: cache flushes supported hde: hde1 hde2 hde3 hde4 < hde5 > hdf: max request size: 512KiB hdf: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) hdf: cache flushes supported hdf: hdf1 usb 1-2: device not accepting address 2, error -71 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151100d55] ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d80000fee27c] usb 5-6: new high speed USB device using ehci_hcd and address 4 usb 5-6: configuration #1 chosen from 1 choice hub 5-6:1.0: USB hub found hub 5-6:1.0: 4 ports detected usb 5-7: new high speed USB device using ehci_hcd and address 5 usb 5-7: configuration #1 chosen from 1 choice hub 5-7:1.0: USB hub found hub 5-7:1.0: 4 ports detected usb 1-2: new low speed USB device using uhci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host1) usb 3-1: new full speed USB device using uhci_hcd and address 2 input: PC Speaker as /class/input/input1 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 18 usb 3-1: configuration #1 chosen from 1 choice usb 5-6.3: new low speed USB device using ehci_hcd and address 6 intel_rng: FWH not detected usb 5-6.3: configuration #1 chosen from 1 choice gameport: EMU10K1 is pci0000:01:01.1/gameport0, io 0xac00, speed 1028kHz Real Time Clock Driver v1.12ac usb 5-7.3: new high speed USB device using ehci_hcd and address 7 usb 5-7.3: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2 input: Logitech Logitech RumblePad 2 USB as /class/input/input3 input: USB HID v1.10 Joystick [Logitech Logitech RumblePad 2 USB] on usb-0000:00:1d.7-6.3 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 20 Installing spdif_bug patch: Audigy 2 ZS [SB0350] EXT3 FS on hde2, internal journal Probing IDE interface ide1... Probing IDE interface ide3... device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS: bad magic number XFS: SB validate failed e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp: driver loaded but no devices found ppdev: user-space parallel port driver eth0: no IPv6 routers present