All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steve Sakoman <steve@sakoman.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/11] ARMV7: OMAP: Add support for OMAP36XX/37XX, cleanup OMAP3 common code
Date: Tue, 31 Aug 2010 16:35:45 -0700	[thread overview]
Message-ID: <1283297745.27128.7.camel@quadra> (raw)
In-Reply-To: <1283296887-8631-1-git-send-email-steve@sakoman.com>

On Tue, 2010-08-31 at 16:21 -0700, Steve Sakoman wrote: 
> This patch series adds support for TI's OMAP36XX/377XX processors and
> modifies the Beagle and Overo board files to support upcoming versions
> of these boards based upon processors from the OMAP36XX/37XX families.
> 
> A number of cleanups and bug fixes to generic OMAP3 code are also
> included since they were discovered during the process of adding this
> support.
> 
> This patch depends on the previous series:
> 
> ARMV7: OMAP3: Board updates for Beagle and Overo
> 
> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/82805

Both this series and the one mentioned above are also available in the
omap4-next-upstream branch of my repository:

http://www.sakoman.com/cgi-bin/gitweb.cgi?p=u-boot.git;a=shortlog;h=refs/heads/omap4-next-upstream

Steve

  parent reply	other threads:[~2010-08-31 23:35 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-31 23:21 [U-Boot] [PATCH 00/11] ARMV7: OMAP: Add support for OMAP36XX/37XX, cleanup OMAP3 common code Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 01/11] ARMV7: OMAP3: Update CPU type detection for AM35XX/OMAP36XX/37XX Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 02/11] ARMV7: OMAP3: Add clock setup for OMAP36XX/37XX Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 03/11] ARMV7: OMAP3: Fix and clean up L2 cache enable/disable functions Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 04/11] ARMV7: OMAP3: Convert setup_auxcr() to pure asm Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 05/11] ARMV7: OMAP3: Apply Cortex-A8 errata workarounds only on affected revisions Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 06/11] ARMV7: OMAP3: Fix broken reset command on OMAP36XX/37XX and OMAP4 Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 07/11] ARMV7: OMAP3: Remove erroneous hard coded sdram setup for 128MB/bank Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 08/11] mtd: nand: honor CONFIG_SYS_NAND_QUIET_TEST with unknown NAND printk Steve Sakoman
2010-09-01  0:18   ` Paulraj, Sandeep
2010-09-01 16:26     ` Scott Wood
2010-09-01 16:43       ` Steve Sakoman
2010-09-01 17:55         ` Scott Wood
2010-09-02 15:33           ` [U-Boot] [PATCH V2 08/11] mtd: nand: supress 'unknown NAND' warning if no nand is found Steve Sakoman
2010-09-04 17:38             ` Paulraj, Sandeep
2010-09-04 20:16               ` Steve Sakoman
2010-09-07 17:37               ` Scott Wood
2010-09-07 21:27               ` Steve Sakoman
2010-09-05 10:59             ` Sergei Shtylyov
2010-09-05 21:37               ` Steve Sakoman
2010-09-07 17:37                 ` Scott Wood
2010-08-31 23:21 ` [U-Boot] [PATCH 09/11] ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 10/11] ARMV7: OMAP3: Add support for Beagle xM Steve Sakoman
2010-08-31 23:21 ` [U-Boot] [PATCH 11/11] ARMV7: OMAP: Overo: Autodetect presence/absence of transceiver on mmc2 Steve Sakoman
2010-08-31 23:35 ` Steve Sakoman [this message]
2010-09-01  0:20   ` [U-Boot] [PATCH 00/11] ARMV7: OMAP: Add support for OMAP36XX/37XX, cleanup OMAP3 common code Paulraj, Sandeep

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1283297745.27128.7.camel@quadra \
    --to=steve@sakoman.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.