From: Tushar Behera <tushar.behera@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org
Cc: kgene.kim@samsung.com, patches@linaro.org,
Sachin Kamat <sachin.kamat@linaro.org>
Subject: [PATCH 5/5] ARM: dts: exynos5250-arndale: Add HDMI HPD and regulator node
Date: Thu, 7 Feb 2013 10:45:29 +0530 [thread overview]
Message-ID: <1360214129-4096-5-git-send-email-tushar.behera@linaro.org> (raw)
In-Reply-To: <1360214129-4096-1-git-send-email-tushar.behera@linaro.org>
From: Sachin Kamat <sachin.kamat@linaro.org>
Added HDMI hot plug and regulator nodes to Arndale DT file.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6162a72..7b891a9 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -386,6 +386,13 @@
};
};
+ hdmi {
+ hpd-gpio = <&gpx3 7 0xf 1 3>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ };
+
mmc_reg: voltage-regulator {
compatible = "regulator-fixed";
regulator-name = "VDD_33ON_2.8V";
@@ -394,4 +401,9 @@
gpio = <&gpx1 1 0 0 2>;
enable-active-high;
};
+
+ reg_hdmi_en: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi-en";
+ };
};
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: tushar.behera@linaro.org (Tushar Behera)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] ARM: dts: exynos5250-arndale: Add HDMI HPD and regulator node
Date: Thu, 7 Feb 2013 10:45:29 +0530 [thread overview]
Message-ID: <1360214129-4096-5-git-send-email-tushar.behera@linaro.org> (raw)
In-Reply-To: <1360214129-4096-1-git-send-email-tushar.behera@linaro.org>
From: Sachin Kamat <sachin.kamat@linaro.org>
Added HDMI hot plug and regulator nodes to Arndale DT file.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6162a72..7b891a9 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -386,6 +386,13 @@
};
};
+ hdmi {
+ hpd-gpio = <&gpx3 7 0xf 1 3>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ };
+
mmc_reg: voltage-regulator {
compatible = "regulator-fixed";
regulator-name = "VDD_33ON_2.8V";
@@ -394,4 +401,9 @@
gpio = <&gpx1 1 0 0 2>;
enable-active-high;
};
+
+ reg_hdmi_en: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi-en";
+ };
};
--
1.7.4.1
next prev parent reply other threads:[~2013-02-07 5:15 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-07 5:15 [PATCH 1/5] ARM: dts: exynos5250-arndale: Add node entry for gpio-buttons Tushar Behera
2013-02-07 5:15 ` Tushar Behera
2013-02-07 5:15 ` [PATCH 2/5] ARM: dts: exynos5250-arndale: Add PMIC node entry Tushar Behera
2013-02-07 5:15 ` Tushar Behera
2013-02-07 5:49 ` Kumar, Anil
2013-02-07 5:49 ` Kumar, Anil
2013-02-07 5:56 ` Tushar Behera
2013-02-07 5:56 ` Tushar Behera
2013-02-11 0:38 ` amit daniel kachhap
2013-02-11 0:38 ` amit daniel kachhap
2013-03-11 2:05 ` Kukjin Kim
2013-03-11 2:05 ` Kukjin Kim
2013-02-07 5:15 ` [PATCH 3/5] ARM: dts: exynos5250-arndale: Add vmmc regulator support Tushar Behera
2013-02-07 5:15 ` Tushar Behera
2013-02-07 5:15 ` [PATCH 4/5] ARM: dts: exynos5250-arndale: Add MFC codec support Tushar Behera
2013-02-07 5:15 ` Tushar Behera
2013-02-07 5:15 ` Tushar Behera [this message]
2013-02-07 5:15 ` [PATCH 5/5] ARM: dts: exynos5250-arndale: Add HDMI HPD and regulator node Tushar Behera
2013-02-07 6:17 ` [PATCH 1/5] ARM: dts: exynos5250-arndale: Add node entry for gpio-buttons Kumar, Anil
2013-02-07 6:17 ` Kumar, Anil
2013-02-07 6:26 ` Tushar Behera
2013-02-07 6:26 ` Tushar Behera
2013-02-07 6:36 ` Manish Badarkhe
2013-02-07 6:36 ` Manish Badarkhe
2013-02-07 6:56 ` Tushar Behera
2013-02-07 6:56 ` Tushar Behera
2013-02-07 7:43 ` Girish KS
2013-02-07 7:43 ` Girish KS
2013-02-07 9:40 ` Tushar Behera
2013-02-07 9:40 ` Tushar Behera
2013-02-07 11:25 ` Tomasz Figa
2013-02-07 11:25 ` Tomasz Figa
2013-02-07 10:30 ` Tomasz Figa
2013-02-07 10:30 ` Tomasz Figa
2013-03-11 2:05 ` Kukjin Kim
2013-03-11 2:05 ` Kukjin Kim
2013-03-11 9:44 ` Tushar Behera
2013-03-11 9:44 ` Tushar Behera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360214129-4096-5-git-send-email-tushar.behera@linaro.org \
--to=tushar.behera@linaro.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=sachin.kamat@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.