All of lore.kernel.org
 help / color / mirror / Atom feed
From: nick.dyer@itdev.co.uk
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Yufeng Shen <miletus@google.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Henrik Rydberg <rydberg@euromail.se>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Alan Bowens <Alan.Bowens@atmel.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Benson Leung <bleung@chromium.org>,
	Olof Johansson <olofj@chromium.org>, Sekhar Nori <nsekhar@ti.com>,
	Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 14/15] Input: atmel_mxt_ts - split message handler into separate functions
Date: Thu,  3 Jul 2014 16:01:36 +0100	[thread overview]
Message-ID: <1404399697-26484-15-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1404399697-26484-1-git-send-email-nick.dyer@itdev.co.uk>

From: Nick Dyer <nick.dyer@itdev.co.uk>

This is in preparation for support of the T44 message count object.

Also, cache T5 address to avoid lookup on every interrupt cycle.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 123 ++++++++++++++++---------------
 1 file changed, 64 insertions(+), 59 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index c409753..c3eee0f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -253,8 +253,10 @@ struct mxt_data {
 	struct t7_config t7_cfg;
 	u8 *msg_buf;
 	u8 t6_status;
+	bool update_input;
 
 	/* Cached parameters from object table */
+	u16 T5_address;
 	u8 T5_msg_size;
 	u8 T6_reportid;
 	u16 T6_address;
@@ -666,20 +668,6 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
 	data->t6_status = status;
 }
 
-static int mxt_read_message(struct mxt_data *data, u8 *message)
-{
-	struct mxt_object *object;
-	u16 reg;
-
-	object = mxt_get_object(data, MXT_GEN_MESSAGE_T5);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return __mxt_read_reg(data->client, reg,
-			data->T5_msg_size, message);
-}
-
 static void mxt_input_button(struct mxt_data *data, u8 *message)
 {
 	struct input_dev *input = data->input_dev;
@@ -703,7 +691,7 @@ static void mxt_input_sync(struct mxt_data *data)
 	input_sync(data->input_dev);
 }
 
-static void mxt_input_touchevent(struct mxt_data *data, u8 *message)
+static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 {
 	struct device *dev = &data->client->dev;
 	struct input_dev *input_dev = data->input_dev;
@@ -765,50 +753,67 @@ static void mxt_input_touchevent(struct mxt_data *data, u8 *message)
 		/* Touch no longer active, close out slot */
 		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
 	}
+
+	data->update_input = true;
 }
 
-static bool mxt_is_T9_message(struct mxt_data *data, u8 *msg)
+static int mxt_proc_message(struct mxt_data *data, u8 *message)
 {
-	u8 id = msg[0];
-	return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
+	u8 report_id = message[0];
+
+	if (report_id == MXT_RPTID_NOMSG)
+		return 0;
+
+	if (report_id == data->T6_reportid) {
+		mxt_proc_t6_messages(data, message);
+	} else if (!data->input_dev) {
+		/*
+		 * do not report events if input device
+		 * is not yet registered
+		 */
+		mxt_dump_message(data, message);
+	} else if (report_id >= data->T9_reportid_min
+	    && report_id <= data->T9_reportid_max) {
+		mxt_proc_t9_message(data, message);
+	} else if (report_id == data->T19_reportid) {
+		mxt_input_button(data, message);
+		data->update_input = true;
+	} else {
+		mxt_dump_message(data, message);
+	}
+
+	return 1;
 }
 
-static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
+static int mxt_read_and_process_message(struct mxt_data *data)
 {
-	u8 *message = &data->msg_buf[0];
 	struct device *dev = &data->client->dev;
-	u8 reportid;
-	bool update_input = false;
+	int ret;
 
-	do {
-		if (mxt_read_message(data, message)) {
-			dev_err(dev, "Failed to read message\n");
-			return IRQ_NONE;
-		}
+	ret = __mxt_read_reg(data->client, data->T5_address,
+				data->T5_msg_size, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Error %d reading message\n", ret);
+		return ret;
+	}
 
-		reportid = message[0];
+	return mxt_proc_message(data, data->msg_buf);
+}
 
-		if (reportid == data->T6_reportid) {
-			mxt_proc_t6_messages(data, message);
-		} else if (!data->input_dev) {
-			/*
-			 * do not report events if input device
-			 * is not yet registered
-			 */
-			mxt_dump_message(data, message);
-		} else if (mxt_is_T9_message(data, message)) {
-			mxt_input_touchevent(data, message);
-			update_input = true;
-		} else if (reportid == data->T19_reportid) {
-			mxt_input_button(data, message);
-			update_input = true;
-		} else {
-			mxt_dump_message(data, message);
-		}
-	} while (reportid != MXT_RPTID_NOMSG);
+static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
+{
+	int ret;
+
+	do {
+		ret = mxt_read_and_process_message(data);
+		if (ret < 0)
+			return IRQ_NONE;
+	} while (ret > 0);
 
-	if (update_input)
+	if (data->update_input) {
 		mxt_input_sync(data);
+		data->update_input = false;
+	}
 
 	return IRQ_HANDLED;
 }
@@ -1257,21 +1262,19 @@ static int mxt_make_highchg(struct mxt_data *data)
 {
 	struct device *dev = &data->client->dev;
 	int count = 10;
-	int error;
+	int ret;
 
-	/* Read dummy message to make high CHG pin */
+	/* Read messages until we force an invalid */
 	do {
-		error = mxt_read_message(data, data->msg_buf);
-		if (error)
-			return error;
-	} while (data->msg_buf[0] != MXT_RPTID_NOMSG && --count);
-
-	if (!count) {
-		dev_err(dev, "CHG pin isn't cleared\n");
-		return -EBUSY;
-	}
+		ret = mxt_read_and_process_message(data);
+		if (ret == 0)
+			return 0;
+		else if (ret < 0)
+			return ret;
+	} while (--count);
 
-	return 0;
+	dev_err(dev, "CHG pin isn't cleared\n");
+	return -EBUSY;
 }
 
 static int mxt_acquire_irq(struct mxt_data *data)
@@ -1310,6 +1313,7 @@ static void mxt_free_object_table(struct mxt_data *data)
 	data->object_table = NULL;
 	kfree(data->msg_buf);
 	data->msg_buf = NULL;
+	data->T5_address = 0;
 	data->T5_msg_size = 0;
 	data->T6_reportid = 0;
 	data->T7_address = 0;
@@ -1371,6 +1375,7 @@ static int mxt_get_object_table(struct mxt_data *data)
 		case MXT_GEN_MESSAGE_T5:
 			/* CRC not enabled, therefore don't read last byte */
 			data->T5_msg_size = mxt_obj_size(object) - 1;
+			data->T5_address = object->start_address;
 		case MXT_GEN_COMMAND_T6:
 			data->T6_reportid = min_id;
 			data->T6_address = object->start_address;
-- 
2.0.1


  parent reply	other threads:[~2014-07-03 15:13 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-03 15:01 [PATCH 00/15] atmel_mxt_ts - device tree, bootloader, etc nick.dyer
2014-07-03 15:01 ` [PATCH 01/15] Input: atmel_mxt_ts - initialise IRQ before probing nick.dyer
2014-07-03 15:01 ` [PATCH 02/15] Input: atmel_mxt_ts - move input device init into separate function nick.dyer
2014-07-03 15:01 ` [PATCH 03/15] Input: atmel_mxt_ts - set pointer emulation on touchpads nick.dyer
2014-07-03 15:01 ` [PATCH 04/15] Input: atmel_mxt_ts - implement device tree support nick.dyer
2014-07-22 20:37   ` Stephen Warren
2014-07-23 15:13     ` Nick Dyer
2014-07-23 21:36   ` Stephen Warren
2014-07-24 15:10     ` Nick Dyer
2014-07-24 16:04       ` Stephen Warren
2014-07-03 15:01 ` [PATCH 05/15] Input: atmel_mxt_ts - download device config using firmware loader nick.dyer
2014-07-03 15:01 ` [PATCH 06/15] Input: atmel_mxt_ts - calculate and check CRC in config file nick.dyer
2014-07-03 15:01 ` [PATCH 07/15] Input: atmel_mxt_ts - use deep sleep mode when stopped nick.dyer
2014-07-03 15:01 ` [PATCH 08/15] Input: atmel_mxt_ts - handle APP_CRC_FAIL on startup nick.dyer
2014-07-03 15:01 ` [PATCH 09/15] Input: atmel_mxt_ts - handle bootloader previously unlocked nick.dyer
2014-07-03 15:01 ` [PATCH 10/15] Input: atmel_mxt_ts - add bootloader addresses for new chips nick.dyer
2014-07-03 15:01 ` [PATCH 11/15] Input: atmel_mxt_ts - recover from bootloader on probe nick.dyer
2014-07-03 15:01 ` [PATCH 12/15] Input: atmel_mxt_ts - add support for dynamic message size nick.dyer
2014-07-03 15:01 ` [PATCH 13/15] Input: atmel_mxt_ts - decode T6 status messages nick.dyer
2014-07-03 15:01 ` nick.dyer [this message]
2014-07-03 15:01 ` [PATCH 15/15] Input: atmel_mxt_ts - implement T44 message handling nick.dyer
2014-07-07 11:21 ` [PATCH 00/15] atmel_mxt_ts - device tree, bootloader, etc Sekhar Nori
2014-07-07 11:21   ` Sekhar Nori
2014-07-07 11:38   ` Nick Dyer
2014-07-08 12:28     ` Sekhar Nori
2014-07-08 12:28       ` Sekhar Nori
2014-07-22 20:34 ` Stephen Warren
2014-07-23 15:30   ` Nick Dyer
2014-07-23 17:22     ` Stephen Warren
2014-07-23 20:29       ` Dmitry Torokhov
2014-07-23 21:39         ` Stephen Warren
2014-07-24 13:47       ` Nick Dyer
2014-07-24 21:19         ` Stephen Warren
2014-07-25 14:10           ` Nick Dyer
2014-07-25 20:06             ` Stephen Warren
2014-07-25 20:06               ` Stephen Warren
2014-07-28 17:28               ` Dmitry Torokhov
2014-07-28 20:20               ` Yufeng Shen
2014-07-28 21:23                 ` Stephen Warren
2014-07-28 23:42                   ` Stephen Warren
2014-07-29  0:10                     ` Yufeng Shen
2014-07-29 16:16                       ` Stephen Warren
2014-07-29 17:06                         ` Nick Dyer
2014-07-29 19:26                           ` Stephen Warren
2014-09-02 15:45                             ` Stephen Warren
2014-07-29 16:43                       ` Nick Dyer
2014-07-29 16:26                     ` Nick Dyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404399697-26484-15-git-send-email-nick.dyer@itdev.co.uk \
    --to=nick.dyer@itdev.co.uk \
    --cc=Alan.Bowens@atmel.com \
    --cc=bleung@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jy0922.shim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miletus@google.com \
    --cc=nsekhar@ti.com \
    --cc=olofj@chromium.org \
    --cc=pmeerw@pmeerw.net \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.