All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: James Bottomley <James.Bottomley@HansenPartnership.com>,
	linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>,
	Bart Van Assche <bvanassche@fusionio.com>,
	Mike Christie <michaelc@cs.wisc.edu>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Robert Elliott <Elliott@hp.com>, Webb Scales <webbnh@hp.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready
Date: Fri, 18 Jul 2014 12:13:04 +0200	[thread overview]
Message-ID: <1405678393-11497-6-git-send-email-hch@lst.de> (raw)
In-Reply-To: <1405678393-11497-1-git-send-email-hch@lst.de>

Prepare for not taking a host-wide lock in the dispatch path by pushing
the lock down into the places that actually need it.  Note that this
patch is just a preparation step, as it will actually increase lock
roundtrips and thus decrease performance on its own.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Webb Scales <webbnh@hp.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Robert Elliott <elliott@hp.com>
---
 drivers/scsi/scsi_lib.c | 75 +++++++++++++++++++++++++------------------------
 1 file changed, 39 insertions(+), 36 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index b832696..112c737 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1274,18 +1274,18 @@ static inline int scsi_dev_queue_ready(struct request_queue *q,
 /*
  * scsi_target_queue_ready: checks if there we can send commands to target
  * @sdev: scsi device on starget to check.
- *
- * Called with the host lock held.
  */
 static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
 					   struct scsi_device *sdev)
 {
 	struct scsi_target *starget = scsi_target(sdev);
+	int ret = 0;
 
+	spin_lock_irq(shost->host_lock);
 	if (starget->single_lun) {
 		if (starget->starget_sdev_user &&
 		    starget->starget_sdev_user != sdev)
-			return 0;
+			goto out;
 		starget->starget_sdev_user = sdev;
 	}
 
@@ -1293,57 +1293,66 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
 		/*
 		 * unblock after target_blocked iterates to zero
 		 */
-		if (--starget->target_blocked == 0) {
-			SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
-					 "unblocking target at zero depth\n"));
-		} else
-			return 0;
+		if (--starget->target_blocked != 0)
+			goto out;
+
+		SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
+				 "unblocking target at zero depth\n"));
 	}
 
 	if (scsi_target_is_busy(starget)) {
 		list_move_tail(&sdev->starved_entry, &shost->starved_list);
-		return 0;
+		goto out;
 	}
 
-	return 1;
+	scsi_target(sdev)->target_busy++;
+	ret = 1;
+out:
+	spin_unlock_irq(shost->host_lock);
+	return ret;
 }
 
 /*
  * scsi_host_queue_ready: if we can send requests to shost, return 1 else
  * return 0. We must end up running the queue again whenever 0 is
  * returned, else IO can hang.
- *
- * Called with host_lock held.
  */
 static inline int scsi_host_queue_ready(struct request_queue *q,
 				   struct Scsi_Host *shost,
 				   struct scsi_device *sdev)
 {
+	int ret = 0;
+
+	spin_lock_irq(shost->host_lock);
+
 	if (scsi_host_in_recovery(shost))
-		return 0;
+		goto out;
 	if (shost->host_busy == 0 && shost->host_blocked) {
 		/*
 		 * unblock after host_blocked iterates to zero
 		 */
-		if (--shost->host_blocked == 0) {
-			SCSI_LOG_MLQUEUE(3,
-				shost_printk(KERN_INFO, shost,
-					     "unblocking host at zero depth\n"));
-		} else {
-			return 0;
-		}
+		if (--shost->host_blocked != 0)
+			goto out;
+
+		SCSI_LOG_MLQUEUE(3,
+			shost_printk(KERN_INFO, shost,
+				     "unblocking host at zero depth\n"));
 	}
 	if (scsi_host_is_busy(shost)) {
 		if (list_empty(&sdev->starved_entry))
 			list_add_tail(&sdev->starved_entry, &shost->starved_list);
-		return 0;
+		goto out;
 	}
 
 	/* We're OK to process the command, so we can't be starved */
 	if (!list_empty(&sdev->starved_entry))
 		list_del_init(&sdev->starved_entry);
 
-	return 1;
+	shost->host_busy++;
+	ret = 1;
+out:
+	spin_unlock_irq(shost->host_lock);
+	return ret;
 }
 
 /*
@@ -1524,7 +1533,7 @@ static void scsi_request_fn(struct request_queue *q)
 			blk_start_request(req);
 		sdev->device_busy++;
 
-		spin_unlock(q->queue_lock);
+		spin_unlock_irq(q->queue_lock);
 		cmd = req->special;
 		if (unlikely(cmd == NULL)) {
 			printk(KERN_CRIT "impossible request in %s.\n"
@@ -1534,7 +1543,6 @@ static void scsi_request_fn(struct request_queue *q)
 			blk_dump_rq_flags(req, "foo");
 			BUG();
 		}
-		spin_lock(shost->host_lock);
 
 		/*
 		 * We hit this when the driver is using a host wide
@@ -1545,9 +1553,11 @@ static void scsi_request_fn(struct request_queue *q)
 		 * a run when a tag is freed.
 		 */
 		if (blk_queue_tagged(q) && !blk_rq_tagged(req)) {
+			spin_lock_irq(shost->host_lock);
 			if (list_empty(&sdev->starved_entry))
 				list_add_tail(&sdev->starved_entry,
 					      &shost->starved_list);
+			spin_unlock_irq(shost->host_lock);
 			goto not_ready;
 		}
 
@@ -1555,16 +1565,7 @@ static void scsi_request_fn(struct request_queue *q)
 			goto not_ready;
 
 		if (!scsi_host_queue_ready(q, shost, sdev))
-			goto not_ready;
-
-		scsi_target(sdev)->target_busy++;
-		shost->host_busy++;
-
-		/*
-		 * XXX(hch): This is rather suboptimal, scsi_dispatch_cmd will
-		 *		take the lock again.
-		 */
-		spin_unlock_irq(shost->host_lock);
+			goto host_not_ready;
 
 		/*
 		 * Finally, initialize any error handling parameters, and set up
@@ -1587,9 +1588,11 @@ static void scsi_request_fn(struct request_queue *q)
 
 	return;
 
- not_ready:
+ host_not_ready:
+	spin_lock_irq(shost->host_lock);
+	scsi_target(sdev)->target_busy--;
 	spin_unlock_irq(shost->host_lock);
-
+ not_ready:
 	/*
 	 * lock q, handle tag, requeue req, and decrement device_busy. We
 	 * must return with queue_lock held.
-- 
1.9.1


  parent reply	other threads:[~2014-07-18 10:16 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-18 10:12 scsi-mq V4 Christoph Hellwig
2014-07-18 10:13 ` [PATCH 01/14] scsi: add scsi_setup_cmnd helper Christoph Hellwig
2014-07-22  3:42   ` Martin K. Petersen
2014-07-22 17:20   ` Webb Scales
2014-07-18 10:13 ` [PATCH 02/14] scsi: split __scsi_queue_insert Christoph Hellwig
2014-07-22  3:44   ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 03/14] scsi: centralize command re-queueing in scsi_dispatch_fn Christoph Hellwig
2014-07-22  3:46   ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 04/14] scsi: set ->scsi_done before calling scsi_dispatch_cmd Christoph Hellwig
2014-07-22  3:48   ` Martin K. Petersen
2014-07-18 10:13 ` Christoph Hellwig [this message]
2014-07-22  3:52   ` [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready Martin K. Petersen
2014-07-18 10:13 ` [PATCH 06/14] scsi: convert target_busy to an atomic_t Christoph Hellwig
2014-07-22  3:56   ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 07/14] scsi: convert host_busy to atomic_t Christoph Hellwig
2014-07-22  4:01   ` Martin K. Petersen
2014-07-22  4:18   ` Martin K. Petersen
2014-07-25 11:38     ` Christoph Hellwig
2014-07-18 10:13 ` [PATCH 08/14] scsi: convert device_busy " Christoph Hellwig
2014-07-18 10:13 ` [PATCH 09/14] scsi: fix the {host,target,device}_blocked counter mess Christoph Hellwig
2014-07-25 19:08   ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 10/14] scsi: only maintain target_blocked if the driver has a target queue limit Christoph Hellwig
2014-07-25 19:10   ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 11/14] scsi: unwind blk_end_request_all and blk_end_request_err calls Christoph Hellwig
2014-07-25 19:12   ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 12/14] scatterlist: allow chaining to preallocated chunks Christoph Hellwig
2014-07-25 19:15   ` Martin K. Petersen
2014-07-18 10:13 ` [PATCH 13/14] scsi: add support for a blk-mq based I/O path Christoph Hellwig
2014-07-25 19:29   ` Martin K. Petersen
2014-08-18 22:21   ` Kashyap Desai
2014-08-19 15:41     ` Kashyap Desai
2014-08-19 16:06     ` Christoph Hellwig
2014-08-19 16:11       ` Kashyap Desai
2014-07-18 10:13 ` [PATCH 14/14] fnic: reject device resets without assigned tags for the blk-mq case Christoph Hellwig
2014-07-25 19:31   ` Martin K. Petersen
  -- strict thread matches above, loose matches on Subject: below --
2014-06-25 16:51 scsi-mq V2 Christoph Hellwig
2014-06-25 16:51 ` [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready Christoph Hellwig
2014-07-09 11:14   ` Hannes Reinecke
2014-06-12 13:48 scsi-mq Christoph Hellwig
2014-06-12 13:48 ` [PATCH 05/14] scsi: push host_lock down into scsi_{host,target}_queue_ready Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1405678393-11497-6-git-send-email-hch@lst.de \
    --to=hch@lst.de \
    --cc=Elliott@hp.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@fusionio.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=michaelc@cs.wisc.edu \
    --cc=webbnh@hp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.