All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ramneek Mehresh <ramneek.mehresh@freescale.com>
To: <linux-kernel@vger.kernel.org>
Cc: <linux-usb@vger.kernel.org>, <stern@rowland.harvard.edu>,
	<gregkh@linuxfoundation.org>,
	Ramneek Mehresh <ramneek.mehresh@freescale.com>
Subject: [PATCH][v2]drivers:usb:fsl:Make fsl ehci drv an independent driver module
Date: Thu, 14 May 2015 19:04:46 +0530	[thread overview]
Message-ID: <1431610486-31818-1-git-send-email-ramneek.mehresh@freescale.com> (raw)

Make Freescale EHCI driver an independent entity from ehci-hcd.c.
This involves
	- using module_init/module_exit functions
	- using overrides structure
	- some necessary code cleanup 

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
---
Changes for v2:
        - merged previous two separate patches into one
        - modified DRIVER_DESC to be more descriptive
        - remove "driver" parameter explanation from
          fsl_ehci_drv_probe()
	- updated year in copyright

 drivers/usb/host/Kconfig    |   2 +-
 drivers/usb/host/Makefile   |   1 +
 drivers/usb/host/ehci-fsl.c | 168 +++++++++++++++++++-------------------------
 drivers/usb/host/ehci-hcd.c |   5 --
 4 files changed, 74 insertions(+), 102 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 197a6a3..547cee8 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -137,7 +137,7 @@ config XPS_USB_HCD_XILINX
 		devices only.
 
 config USB_EHCI_FSL
-	bool "Support for Freescale PPC on-chip EHCI USB controller"
+	tristate "Support for Freescale PPC on-chip EHCI USB controller"
 	depends on FSL_SOC
 	select USB_EHCI_ROOT_HUB_TT
 	select USB_FSL_MPH_DR_OF if OF
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 972a74a..754efaa 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
 obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
+obj-$(CONFIG_USB_EHCI_FSL)	+= ehci-fsl.o
 obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
 obj-$(CONFIG_USB_HCD_SSB)	+= ssb-hcd.o
 obj-$(CONFIG_USB_FUSBH200_HCD)	+= fusbh200-hcd.o
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index ab4eee3..5352e74 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -1,6 +1,6 @@
 /*
  * Copyright 2005-2009 MontaVista Software, Inc.
- * Copyright 2008,2012      Freescale Semiconductor, Inc.
+ * Copyright 2008,2012,2015      Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -24,29 +24,38 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/err.h>
+#include <linux/usb.h>
+#include <linux/usb/ehci_def.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
 
+#include "ehci.h"
 #include "ehci-fsl.h"
 
+#define DRIVER_DESC "Freescale EHCI Host controller driver"
+#define DRV_NAME "ehci-fsl"
+
+static struct hc_driver __read_mostly fsl_ehci_hc_driver;
+
 /* configure so an HC device and id are always provided */
 /* always called with process context; sleeping is OK */
 
-/**
- * usb_hcd_fsl_probe - initialize FSL-based HCDs
- * @drvier: Driver to be used for this HCD
+/*
+ * fsl_ehci_drv_probe - initialize FSL-based HCDs
  * @pdev: USB Host Controller being probed
  * Context: !in_interrupt()
  *
  * Allocates basic resources for this USB host controller.
  *
  */
-static int usb_hcd_fsl_probe(const struct hc_driver *driver,
-			     struct platform_device *pdev)
+static int fsl_ehci_drv_probe(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata;
 	struct usb_hcd *hcd;
@@ -86,7 +95,8 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	}
 	irq = res->start;
 
-	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	hcd = usb_create_hcd(&fsl_ehci_hc_driver, &pdev->dev,
+				dev_name(&pdev->dev));
 	if (!hcd) {
 		retval = -ENOMEM;
 		goto err1;
@@ -159,38 +169,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	return retval;
 }
 
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_fsl_probe().
- *
- */
-static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
-			       struct platform_device *pdev)
-{
-	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
-
-	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
-		otg_set_host(hcd->usb_phy->otg, NULL);
-		usb_put_phy(hcd->usb_phy);
-	}
-
-	usb_remove_hcd(hcd);
-
-	/*
-	 * do platform specific un-initialization:
-	 * release iomux pins, disable clock, etc.
-	 */
-	if (pdata->exit)
-		pdata->exit(pdev);
-	usb_put_hcd(hcd);
-}
-
 static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 			       enum fsl_usb2_phy_modes phy_mode,
 			       unsigned int port_offset)
@@ -636,79 +614,77 @@ static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
 #define ehci_start_port_reset	NULL
 #endif /* CONFIG_USB_OTG */
 
+static struct ehci_driver_overrides ehci_fsl_overrides __initdata = {
+	.extra_priv_size = sizeof(struct ehci_fsl),
+	.reset = ehci_fsl_setup,
+};
 
-static const struct hc_driver ehci_fsl_hc_driver = {
-	.description = hcd_name,
-	.product_desc = "Freescale On-Chip EHCI Host Controller",
-	.hcd_priv_size = sizeof(struct ehci_fsl),
+/**
+ * fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_fsl_probe().
+ *
+ */
 
-	/*
-	 * generic hardware linkage
-	 */
-	.irq = ehci_irq,
-	.flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
+static int fsl_ehci_drv_remove(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset = ehci_fsl_setup,
-	.start = ehci_run,
-	.stop = ehci_stop,
-	.shutdown = ehci_shutdown,
+	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+		otg_set_host(hcd->usb_phy->otg, NULL);
+		usb_put_phy(hcd->usb_phy);
+	}
 
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue = ehci_urb_enqueue,
-	.urb_dequeue = ehci_urb_dequeue,
-	.endpoint_disable = ehci_endpoint_disable,
-	.endpoint_reset = ehci_endpoint_reset,
+	usb_remove_hcd(hcd);
 
 	/*
-	 * scheduling support
+	 * do platform specific un-initialization:
+	 * release iomux pins, disable clock, etc.
 	 */
-	.get_frame_number = ehci_get_frame,
+	if (pdata->exit)
+		pdata->exit(pdev);
+	usb_put_hcd(hcd);
 
-	/*
-	 * root hub support
-	 */
-	.hub_status_data = ehci_hub_status_data,
-	.hub_control = ehci_hub_control,
-	.bus_suspend = ehci_bus_suspend,
-	.bus_resume = ehci_bus_resume,
-	.start_port_reset = ehci_start_port_reset,
-	.relinquish_port = ehci_relinquish_port,
-	.port_handed_over = ehci_port_handed_over,
-
-	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+	return 0;
+}
+
+static struct platform_driver ehci_fsl_driver = {
+	.probe = fsl_ehci_drv_probe,
+	.remove = fsl_ehci_drv_remove,
+	.shutdown = usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "fsl-ehci",
+		.pm = EHCI_FSL_PM_OPS,
+	},
 };
 
-static int ehci_fsl_drv_probe(struct platform_device *pdev)
+static int __init ehci_fsl_init(void)
 {
 	if (usb_disabled())
 		return -ENODEV;
 
-	/* FIXME we only want one one probe() not two */
-	return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
-}
+	pr_info(DRV_NAME ": " DRIVER_DESC "\n");
 
-static int ehci_fsl_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides);
 
-	/* FIXME we only want one one remove() not two */
-	usb_hcd_fsl_remove(hcd, pdev);
-	return 0;
+	fsl_ehci_hc_driver.product_desc =
+			"Freescale On-Chip EHCI Host Controller";
+	fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset;
+
+
+	return platform_driver_register(&ehci_fsl_driver);
 }
+module_init(ehci_fsl_init);
 
-MODULE_ALIAS("platform:fsl-ehci");
+static void __exit ehci_fsl_cleanup(void)
+{
+	platform_driver_unregister(&ehci_fsl_driver);
+}
+module_exit(ehci_fsl_cleanup);
 
-static struct platform_driver ehci_fsl_driver = {
-	.probe = ehci_fsl_drv_probe,
-	.remove = ehci_fsl_drv_remove,
-	.shutdown = usb_hcd_platform_shutdown,
-	.driver = {
-		.name = "fsl-ehci",
-		.pm = EHCI_FSL_PM_OPS,
-	},
-};
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f4d88df..9dd161c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1250,11 +1250,6 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR (DRIVER_AUTHOR);
 MODULE_LICENSE ("GPL");
 
-#ifdef CONFIG_USB_EHCI_FSL
-#include "ehci-fsl.c"
-#define	PLATFORM_DRIVER		ehci_fsl_driver
-#endif
-
 #ifdef CONFIG_USB_EHCI_SH
 #include "ehci-sh.c"
 #define PLATFORM_DRIVER		ehci_hcd_sh_driver
-- 
1.8.3.1


             reply	other threads:[~2015-05-14 13:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-14 13:34 Ramneek Mehresh [this message]
2015-05-14 15:39 ` [PATCH][v2]drivers:usb:fsl:Make fsl ehci drv an independent driver module Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431610486-31818-1-git-send-email-ramneek.mehresh@freescale.com \
    --to=ramneek.mehresh@freescale.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.