All of lore.kernel.org
 help / color / mirror / Atom feed
From: Julien Meunier <julien.meunier@6wind.com>
To: helin.zhang@intel.com
Cc: dev@dpdk.org
Subject: [PATCH v2] i40e: fix vlan filtering
Date: Tue,  2 Feb 2016 14:50:57 +0100	[thread overview]
Message-ID: <1454421057-6602-1-git-send-email-julien.meunier@6wind.com> (raw)
In-Reply-To: <1453137515-19195-1-git-send-email-julien.meunier@6wind.com>

VLAN filtering was always performed, even if hw_vlan_filter was
disabled. During device initialization, default filter
RTE_MACVLAN_PERFECT_MATCH was applied. In this situation, all incoming
VLAN frames were dropped by the card (increase of the register RUPP - Rx
Unsupported Protocol).

In order to restore default behavior, if HW VLAN filtering is activated,
set a filter to match MAC and VLAN. If not, set a filter to only match
MAC.

Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
---
Changes since v1:
- use ether_addr_copy() for mac copy
- add more debug messages in case of failure
- update all existing filters when multiple mac addresses have been configured
- when adding new mac address, use correct filter

TODO:
- i40e_update_default_filter_setting always forces to
  RTE_MACVLAN_PERFECT_MATCH.
  => The type of filter should be changed according to vlan filter setting.

- What happens if vlan filter setting changes when various filters are already
  set like RTE_MACVLAN_PERFECT_MATCH, RTE_MACVLAN_PERFECT_MATCH,
  RTE_MAC_HASH_MATCH, RTE_MACVLAN_HASH_MATCH ?
  => With testpmd, it is possible to add manually these filters. But when
  changing vlan filter setting, all previous filter set manually are overriden.
---
drivers/net/i40e/i40e_ethdev.c | 73 ++++++++++++++++++++++++++++++++++++++++--
 drivers/net/i40e/i40e_ethdev.h |  1 +
 2 files changed, 72 insertions(+), 2 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index bf6220d..64d6ada 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -2332,6 +2332,13 @@ i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask)
 	struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
 	struct i40e_vsi *vsi = pf->main_vsi;
 
+	if (mask & ETH_VLAN_FILTER_MASK) {
+		if (dev->data->dev_conf.rxmode.hw_vlan_filter)
+			i40e_vsi_config_vlan_filter(vsi, TRUE);
+		else
+			i40e_vsi_config_vlan_filter(vsi, FALSE);
+	}
+
 	if (mask & ETH_VLAN_STRIP_MASK) {
 		/* Enable or disable VLAN stripping */
 		if (dev->data->dev_conf.rxmode.hw_vlan_strip)
@@ -2583,7 +2590,10 @@ i40e_macaddr_add(struct rte_eth_dev *dev,
 	}
 
 	(void)rte_memcpy(&mac_filter.mac_addr, mac_addr, ETHER_ADDR_LEN);
-	mac_filter.filter_type = RTE_MACVLAN_PERFECT_MATCH;
+	if (dev->data->dev_conf.rxmode.hw_vlan_filter)
+		mac_filter.filter_type = RTE_MACVLAN_PERFECT_MATCH;
+	else
+		mac_filter.filter_type = RTE_MAC_PERFECT_MATCH;
 
 	if (pool == 0)
 		vsi = pf->main_vsi;
@@ -4156,6 +4166,63 @@ fail_mem:
 	return NULL;
 }
 
+/* Configure vlan filter on or off */
+int
+i40e_vsi_config_vlan_filter(struct i40e_vsi *vsi, bool on)
+{
+	int i, num;
+	struct i40e_mac_filter *f;
+	struct i40e_mac_filter_info *mac_filter;
+	enum rte_mac_filter_type desired_filter;
+	int ret = I40E_SUCCESS;
+
+	if (on) {
+		/* Filter to match MAC and VLAN */
+		desired_filter = RTE_MACVLAN_PERFECT_MATCH;
+	} else {
+		/* Filter to match only MAC */
+		desired_filter = RTE_MAC_PERFECT_MATCH;
+	}
+
+	num = vsi->mac_num;
+
+	mac_filter = rte_zmalloc("mac_filter_info_data",
+				 num * sizeof(*mac_filter), 0);
+	if (mac_filter == NULL) {
+		PMD_DRV_LOG(ERR, "failed to allocate memory");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	i = 0;
+
+	/* Remove all existing mac */
+	TAILQ_FOREACH(f, &vsi->mac_list, next) {
+		mac_filter[i] = f->mac_info;
+		ret = i40e_vsi_delete_mac(vsi, &f->mac_info.mac_addr);
+		if (ret) {
+			PMD_DRV_LOG(INFO, "Update VSI failed to %s vlan filter",
+				    on ? "enable" : "disable");
+			goto DONE;
+		}
+		i++;
+	}
+
+	/* Override with new filter */
+	for (i = 0; i < num; i++) {
+		mac_filter[i].filter_type = desired_filter;
+		ret = i40e_vsi_add_mac(vsi, &mac_filter[i]);
+		if (ret) {
+			PMD_DRV_LOG(INFO, "Update VSI failed to %s vlan filter",
+				    on ? "enable" : "disable");
+			goto DONE;
+		}
+	}
+
+DONE:
+	rte_free(mac_filter);
+	return ret;
+}
+
 /* Configure vlan stripping on or off */
 int
 i40e_vsi_config_vlan_stripping(struct i40e_vsi *vsi, bool on)
@@ -4203,9 +4270,11 @@ i40e_dev_init_vlan(struct rte_eth_dev *dev)
 {
 	struct rte_eth_dev_data *data = dev->data;
 	int ret;
+	int mask = 0;
 
 	/* Apply vlan offload setting */
-	i40e_vlan_offload_set(dev, ETH_VLAN_STRIP_MASK);
+	mask = ETH_VLAN_STRIP_MASK | ETH_VLAN_FILTER_MASK;
+	i40e_vlan_offload_set(dev, mask);
 
 	/* Apply double-vlan setting, not implemented yet */
 
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 1f9792b..5505d72 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -551,6 +551,7 @@ void i40e_vsi_queues_unbind_intr(struct i40e_vsi *vsi);
 int i40e_vsi_vlan_pvid_set(struct i40e_vsi *vsi,
 			   struct i40e_vsi_vlan_pvid_info *info);
 int i40e_vsi_config_vlan_stripping(struct i40e_vsi *vsi, bool on);
+int i40e_vsi_config_vlan_filter(struct i40e_vsi *vsi, bool on);
 uint64_t i40e_config_hena(uint64_t flags);
 uint64_t i40e_parse_hena(uint64_t flags);
 enum i40e_status_code i40e_fdir_setup_tx_resources(struct i40e_pf *pf);
-- 
2.1.4

  parent reply	other threads:[~2016-02-02 13:51 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-18 17:18 [PATCH] i40e: fix vlan filtering Julien Meunier
2016-01-19  0:39 ` Zhang, Helin
2016-01-20  3:54 ` Pei, Yulong
2016-01-20  5:00 ` Zhang, Helin
2016-01-20 14:56   ` Julien Meunier
2016-02-02 13:50 ` Julien Meunier [this message]
2016-02-03  1:15   ` [PATCH v2] " Zhang, Helin
2016-02-03 11:32     ` Julien Meunier
2016-02-04  0:41       ` Zhang, Helin
2016-02-04  0:53         ` Stephen Hemminger
2016-02-04  8:38         ` Thomas Monjalon
2016-02-04 11:02   ` [PATCH v3] " Julien Meunier
2016-02-05  0:20     ` Zhang, Helin
2016-02-24 17:51       ` Bruce Richardson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454421057-6602-1-git-send-email-julien.meunier@6wind.com \
    --to=julien.meunier@6wind.com \
    --cc=dev@dpdk.org \
    --cc=helin.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.