All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Goodbody <andrew.goodbody@cambrionix.com>
To: <netdev@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
	Andrew Goodbody <andrew.goodbody@cambrionix.com>
Subject: [PATCH v2 1/1] drivers: net: cpsw: Prevent NUll pointer dereference with two PHYs
Date: Mon, 18 Apr 2016 14:53:26 +0100	[thread overview]
Message-ID: <1460987606-18125-2-git-send-email-andrew.goodbody@cambrionix.com> (raw)
In-Reply-To: <1460987606-18125-1-git-send-email-andrew.goodbody@cambrionix.com>

Adding a 2nd PHY to cpsw results in a NULL pointer dereference
as below. Fix by maintaining a reference to each PHY node in slave
struct instead of a single reference in the priv struct which was
overwritten by the 2nd PHY.

[   17.870933] Unable to handle kernel NULL pointer dereference at virtual address 00000180
[   17.879557] pgd = dc8bc000
[   17.882514] [00000180] *pgd=9c882831, *pte=00000000, *ppte=00000000
[   17.889213] Internal error: Oops: 17 [#1] ARM
[   17.893838] Modules linked in:
[   17.897102] CPU: 0 PID: 1657 Comm: connmand Not tainted 4.5.0-ge463dfb-dirty #11
[   17.904947] Hardware name: Cambrionix whippet
[   17.909576] task: dc859240 ti: dc968000 task.ti: dc968000
[   17.915339] PC is at phy_attached_print+0x18/0x8c
[   17.920339] LR is at phy_attached_info+0x14/0x18
[   17.925247] pc : [<c042baec>]    lr : [<c042bb74>]    psr: 600f0113
[   17.925247] sp : dc969cf8  ip : dc969d28  fp : dc969d18
[   17.937425] r10: dda7a400  r9 : 00000000  r8 : 00000000
[   17.942971] r7 : 00000001  r6 : ddb00480  r5 : ddb8cb34  r4 : 00000000
[   17.949898] r3 : c0954cc0  r2 : c09562b0  r1 : 00000000  r0 : 00000000
[   17.956829] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   17.964401] Control: 10c5387d  Table: 9c8bc019  DAC: 00000051
[   17.970500] Process connmand (pid: 1657, stack limit = 0xdc968210)
[   17.977059] Stack: (0xdc969cf8 to 0xdc96a000)
[   17.981692] 9ce0:                                                       dc969d28 dc969d08
[   17.990386] 9d00: c038f9bc c038f6b4 ddb00480 dc969d34 dc969d28 c042bb74 c042bae4 00000000
[   17.999080] 9d20: c09562b0 c0954cc0 dc969d5c dc969d38 c043ebfc c042bb6c 00000007 00000003
[   18.007773] 9d40: ddb00000 ddb8cb58 ddb00480 00000001 dc969dec dc969d60 c0441614 c043ea68
[   18.016465] 9d60: 00000000 00000003 00000000 fffffff4 dc969df4 0000000d 00000000 00000000
[   18.025159] 9d80: dc969db4 dc969d90 c005dc08 c05839e0 dc969df4 0000000d ddb00000 00001002
[   18.033851] 9da0: 00000000 00000000 dc969dcc dc969db8 c005ddf4 c005dbc8 00000000 00000118
[   18.042544] 9dc0: dc969dec dc969dd0 ddb00000 c06db27c ffff9003 00001002 00000000 00000000
[   18.051237] 9de0: dc969e0c dc969df0 c057c88c c04410dc dc969e0c ddb00000 ddb00000 00000001
[   18.059930] 9e00: dc969e34 dc969e10 c057cb44 c057c7d8 ddb00000 ddb00138 00001002 beaeda20
[   18.068622] 9e20: 00000000 00000000 dc969e5c dc969e38 c057cc28 c057cac0 00000000 dc969e80
[   18.077315] 9e40: dda7a40c beaeda20 00000000 00000000 dc969ecc dc969e60 c05e36d0 c057cc14
[   18.086007] 9e60: dc969e84 00000051 beaeda20 00000000 dda7a40c 00000014 ddb00000 00008914
[   18.094699] 9e80: 30687465 00000000 00000000 00000000 00009003 00000000 00000000 00000000
[   18.103391] 9ea0: 00001002 00008914 dd257ae0 beaeda20 c098a428 beaeda20 00000011 00000000
[   18.112084] 9ec0: dc969edc dc969ed0 c05e4e54 c05e3030 dc969efc dc969ee0 c055f5ac c05e4cc4
[   18.120777] 9ee0: beaeda20 dd257ae0 dc8ab4c0 00008914 dc969f7c dc969f00 c010b388 c055f45c
[   18.129471] 9f00: c071ca40 dd257ac0 c00165e8 dc968000 dc969f3c dc969f20 dc969f64 dc969f28
[   18.138164] 9f20: c0115708 c0683ec8 dd257ac0 dd257ac0 dc969f74 dc969f40 c055f350 c00fc66c
[   18.146857] 9f40: dd82e4d0 00000011 00000000 00080000 dd257ac0 00000000 dc8ab4c0 dc8ab4c0
[   18.155550] 9f60: 00008914 beaeda20 00000011 00000000 dc969fa4 dc969f80 c010bc34 c010b2fc
[   18.164242] 9f80: 00000000 00000011 00000002 00000036 c00165e8 dc968000 00000000 dc969fa8
[   18.172935] 9fa0: c00163e0 c010bbcc 00000000 00000011 00000011 00008914 beaeda20 00009003
[   18.181628] 9fc0: 00000000 00000011 00000002 00000036 00081018 00000001 00000000 beaedc10
[   18.190320] 9fe0: 00083188 beaeda1c 00043a5d b6d29c0c 600b0010 00000011 00000000 00000000
[   18.198989] Backtrace:
[   18.201621] [<c042bad8>] (phy_attached_print) from [<c042bb74>] (phy_attached_info+0x14/0x18)
[   18.210664]  r3:c0954cc0 r2:c09562b0 r1:00000000
[   18.215588]  r4:ddb00480
[   18.218322] [<c042bb60>] (phy_attached_info) from [<c043ebfc>] (cpsw_slave_open+0x1a0/0x280)
[   18.227293] [<c043ea5c>] (cpsw_slave_open) from [<c0441614>] (cpsw_ndo_open+0x544/0x674)
[   18.235874]  r7:00000001 r6:ddb00480 r5:ddb8cb58 r4:ddb00000
[   18.241944] [<c04410d0>] (cpsw_ndo_open) from [<c057c88c>] (__dev_open+0xc0/0x128)
[   18.249972]  r9:00000000 r8:00000000 r7:00001002 r6:ffff9003 r5:c06db27c r4:ddb00000
[   18.258255] [<c057c7cc>] (__dev_open) from [<c057cb44>] (__dev_change_flags+0x90/0x154)
[   18.266745]  r5:00000001 r4:ddb00000
[   18.270575] [<c057cab4>] (__dev_change_flags) from [<c057cc28>] (dev_change_flags+0x20/0x50)
[   18.279523]  r9:00000000 r8:00000000 r7:beaeda20 r6:00001002 r5:ddb00138 r4:ddb00000
[   18.287811] [<c057cc08>] (dev_change_flags) from [<c05e36d0>] (devinet_ioctl+0x6ac/0x76c)
[   18.296483]  r9:00000000 r8:00000000 r7:beaeda20 r6:dda7a40c r5:dc969e80 r4:00000000
[   18.304762] [<c05e3024>] (devinet_ioctl) from [<c05e4e54>] (inet_ioctl+0x19c/0x1c8)
[   18.312882]  r10:00000000 r9:00000011 r8:beaeda20 r7:c098a428 r6:beaeda20 r5:dd257ae0
[   18.321235]  r4:00008914
[   18.323956] [<c05e4cb8>] (inet_ioctl) from [<c055f5ac>] (sock_ioctl+0x15c/0x2d8)
[   18.331829] [<c055f450>] (sock_ioctl) from [<c010b388>] (do_vfs_ioctl+0x98/0x8d0)
[   18.339765]  r7:00008914 r6:dc8ab4c0 r5:dd257ae0 r4:beaeda20
[   18.345822] [<c010b2f0>] (do_vfs_ioctl) from [<c010bc34>] (SyS_ioctl+0x74/0x84)
[   18.353573]  r10:00000000 r9:00000011 r8:beaeda20 r7:00008914 r6:dc8ab4c0 r5:dc8ab4c0
[   18.361924]  r4:00000000
[   18.364653] [<c010bbc0>] (SyS_ioctl) from [<c00163e0>] (ret_fast_syscall+0x0/0x3c)
[   18.372682]  r9:dc968000 r8:c00165e8 r7:00000036 r6:00000002 r5:00000011 r4:00000000
[   18.380960] Code: e92dd810 e24cb010 e24dd010 e59b4004 (e5902180)
[   18.387580] ---[ end trace c80529466223f3f3 ]---

Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
---

v2 - Move allocation of memory for priv->slaves to inside cpsw_probe_dt so it
     has data->slaves initialised first which is needed to calculate size

 drivers/net/ethernet/ti/cpsw.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 42fdfd4..e62909c 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -349,6 +349,7 @@ struct cpsw_slave {
 	struct cpsw_slave_data		*data;
 	struct phy_device		*phy;
 	struct net_device		*ndev;
+	struct device_node		*phy_node;
 	u32				port_vlan;
 	u32				open_stat;
 };
@@ -367,7 +368,6 @@ struct cpsw_priv {
 	spinlock_t			lock;
 	struct platform_device		*pdev;
 	struct net_device		*ndev;
-	struct device_node		*phy_node;
 	struct napi_struct		napi_rx;
 	struct napi_struct		napi_tx;
 	struct device			*dev;
@@ -1148,8 +1148,8 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 		cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
 				   1 << slave_port, 0, 0, ALE_MCAST_FWD_2);
 
-	if (priv->phy_node)
-		slave->phy = of_phy_connect(priv->ndev, priv->phy_node,
+	if (slave->phy_node)
+		slave->phy = of_phy_connect(priv->ndev, slave->phy_node,
 				 &cpsw_adjust_link, 0, slave->data->phy_if);
 	else
 		slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
@@ -1946,7 +1946,7 @@ static int cpsw_probe_dt(struct cpsw_priv *priv,
 	struct device_node *node = pdev->dev.of_node;
 	struct device_node *slave_node;
 	struct cpsw_platform_data *data = &priv->data;
-	int i = 0, ret;
+	int i, ret;
 	u32 prop;
 
 	if (!node)
@@ -1958,6 +1958,14 @@ static int cpsw_probe_dt(struct cpsw_priv *priv,
 	}
 	data->slaves = prop;
 
+	priv->slaves = devm_kzalloc(&pdev->dev,
+				    sizeof(struct cpsw_slave) * data->slaves,
+				    GFP_KERNEL);
+	if (!priv->slaves)
+		return -ENOMEM;
+	for (i = 0; i < data->slaves; i++)
+		priv->slaves[i].slave_num = i;
+
 	if (of_property_read_u32(node, "active_slave", &prop)) {
 		dev_err(&pdev->dev, "Missing active_slave property in the DT.\n");
 		return -EINVAL;
@@ -2023,6 +2031,7 @@ static int cpsw_probe_dt(struct cpsw_priv *priv,
 	if (ret)
 		dev_warn(&pdev->dev, "Doesn't have any child node\n");
 
+	i = 0;
 	for_each_child_of_node(node, slave_node) {
 		struct cpsw_slave_data *slave_data = data->slave_data + i;
 		const void *mac_addr = NULL;
@@ -2033,7 +2042,8 @@ static int cpsw_probe_dt(struct cpsw_priv *priv,
 		if (strcmp(slave_node->name, "slave"))
 			continue;
 
-		priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
+		priv->slaves[i].phy_node =
+			of_parse_phandle(slave_node, "phy-handle", 0);
 		parp = of_get_property(slave_node, "phy_id", &lenp);
 		if (of_phy_is_fixed_link(slave_node)) {
 			struct device_node *phy_node;
@@ -2292,16 +2302,6 @@ static int cpsw_probe(struct platform_device *pdev)
 
 	memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN);
 
-	priv->slaves = devm_kzalloc(&pdev->dev,
-				    sizeof(struct cpsw_slave) * data->slaves,
-				    GFP_KERNEL);
-	if (!priv->slaves) {
-		ret = -ENOMEM;
-		goto clean_runtime_disable_ret;
-	}
-	for (i = 0; i < data->slaves; i++)
-		priv->slaves[i].slave_num = i;
-
 	priv->slaves[0].ndev = ndev;
 	priv->emac_port = 0;
 
-- 
2.5.0

  reply	other threads:[~2016-04-18 13:54 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-18 13:53 [PATCH v2 0/1] drivers: net: cpsw: Fix NULL pointer dereference with two slave PHYs Andrew Goodbody
2016-04-18 13:53 ` Andrew Goodbody [this message]
2016-04-20  0:15 ` David Miller
2016-04-20  8:49   ` Andrew Goodbody
2016-04-20 14:56     ` David Miller
2016-04-19 13:56 Andrew Goodbody
2016-04-19 13:56 ` [PATCH v2 1/1] drivers: net: cpsw: Prevent NUll pointer dereference with two PHYs Andrew Goodbody
2016-04-19 13:56   ` Andrew Goodbody
2016-04-19 14:41   ` Grygorii Strashko
2016-04-19 14:41     ` Grygorii Strashko
2016-04-19 15:01     ` David Rivshin (Allworx)
2016-04-19 15:01       ` David Rivshin (Allworx)
2016-04-19 15:44       ` Grygorii Strashko
2016-04-19 15:44         ` Grygorii Strashko
2016-04-19 17:14         ` David Rivshin (Allworx)
2016-04-19 17:14           ` David Rivshin (Allworx)
2016-04-19 17:44           ` Florian Fainelli
2016-04-19 18:44           ` Grygorii Strashko
2016-04-19 18:44             ` Grygorii Strashko
2016-04-19 22:43             ` David Miller
2016-04-19 23:38               ` David Rivshin (Allworx)
2016-04-20  9:37                 ` Grygorii Strashko
2016-04-20  9:37                   ` Grygorii Strashko
2016-04-19 16:05     ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460987606-18125-2-git-send-email-andrew.goodbody@cambrionix.com \
    --to=andrew.goodbody@cambrionix.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.