All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: dri-devel@lists.freedesktop.org,
	laurent.pinchart@ideasonboard.com, xinliang.liu@linaro.org
Cc: linux-arm-msm@vger.kernel.org, amit.kucheria@linaro.org,
	srinivas.kandagatla@linaro.org, treding@nvidia.com
Subject: [PATCH v4 3/7] drm/i2c: adv7511: Initial support for ADV7533
Date: Mon, 16 May 2016 16:11:06 +0530	[thread overview]
Message-ID: <1463395270-3100-4-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1463395270-3100-1-git-send-email-architt@codeaurora.org>

ADV7533 is a DSI to HDMI encoder chip. It is a derivative of ADV7511,
with additional blocks to translate input DSI data to parallel RGB
data. Besides the ADV7511 I2C register map, it has additional registers
that require to be configured to activate the DSI Rx block.

Create a new config that enables ADV7533 support. Use DT compatible
strings to populate the ADV7533 type enum. Add minimal register
configurations belonging to the DSI/CEC register map. Keep the ADV7533
code in a separate file.

Originally worked on by Lars-Peter Clausen <lars@metafoo.de>

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/i2c/Kconfig   |   7 +++
 drivers/gpu/drm/i2c/Makefile  |   4 +-
 drivers/gpu/drm/i2c/adv7511.c | 100 +++++++++++++++++++++---------------------
 drivers/gpu/drm/i2c/adv7511.h |  67 ++++++++++++++++++++++++++++
 drivers/gpu/drm/i2c/adv7533.c | 100 ++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 228 insertions(+), 50 deletions(-)
 create mode 100644 drivers/gpu/drm/i2c/adv7533.c

diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index 22c7ed6..03c5528 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -7,6 +7,13 @@ config DRM_I2C_ADV7511
 	help
 	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
 
+config DRM_I2C_ADV7533
+	bool "ADV7533 encoder"
+	depends on DRM_I2C_ADV7511
+	default y
+	help
+	  Support for the Analog Devices ADV7533 DSI to HDMI encoder.
+
 config DRM_I2C_CH7006
 	tristate "Chrontel ch7006 TV encoder"
 	default m if DRM_NOUVEAU
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 2c72eb5..cd2c22c 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -1,6 +1,8 @@
 ccflags-y := -Iinclude/drm
 
-obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
+adv75xx-y := adv7511.o
+adv75xx-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv75xx.o
 
 ch7006-y := ch7006_drv.o ch7006_mode.o
 obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index c00d11d..9deb4fd 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -8,48 +8,17 @@
 
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
 #include <linux/module.h>
-#include <linux/regmap.h>
+#include <linux/of_device.h>
 #include <linux/slab.h>
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
-#include <drm/drm_crtc_helper.h>
 #include <drm/drm_edid.h>
 
 #include "adv7511.h"
 
-struct adv7511 {
-	struct i2c_client *i2c_main;
-	struct i2c_client *i2c_edid;
-
-	struct regmap *regmap;
-	struct regmap *packet_memory_regmap;
-	enum drm_connector_status status;
-	bool powered;
-
-	unsigned int f_tmds;
-
-	unsigned int current_edid_segment;
-	uint8_t edid_buf[256];
-	bool edid_read;
-
-	wait_queue_head_t wq;
-	struct drm_bridge bridge;
-	struct drm_connector connector;
-
-	bool embedded_sync;
-	enum adv7511_sync_polarity vsync_polarity;
-	enum adv7511_sync_polarity hsync_polarity;
-	bool rgb;
-
-	struct edid *edid;
-
-	struct gpio_desc *gpio_pd;
-};
-
 /* ADI recommended values for proper operation. */
 static const struct reg_sequence adv7511_fixed_registers[] = {
 	{ 0x98, 0x03 },
@@ -391,6 +360,9 @@ static void adv7511_power_on(struct adv7511 *adv7511)
 	 */
 	regcache_sync(adv7511->regmap);
 
+	if (adv7511->type == ADV7533)
+		adv7533_dsi_power_on(adv7511);
+
 	adv7511->powered = true;
 }
 
@@ -402,6 +374,9 @@ static void adv7511_power_off(struct adv7511 *adv7511)
 			   ADV7511_POWER_POWER_DOWN);
 	regcache_mark_dirty(adv7511->regmap);
 
+	if (adv7511->type == ADV7533)
+		adv7533_dsi_power_off(adv7511);
+
 	adv7511->powered = false;
 }
 
@@ -871,8 +846,6 @@ static int adv7511_parse_dt(struct device_node *np,
 	const char *str;
 	int ret;
 
-	memset(config, 0, sizeof(*config));
-
 	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
 	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
 	    config->input_color_depth != 12)
@@ -972,9 +945,18 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	adv7511->powered = false;
 	adv7511->status = connector_status_disconnected;
 
-	ret = adv7511_parse_dt(dev->of_node, &link_config);
-	if (ret)
-		return ret;
+	if (dev->of_node)
+		adv7511->type = (enum adv7511_type)of_device_get_match_data(dev);
+	else
+		adv7511->type = id->driver_data;
+
+	memset(&link_config, 0, sizeof(link_config));
+
+	if (adv7511->type == ADV7511) {
+		ret = adv7511_parse_dt(dev->of_node, &link_config);
+		if (ret)
+			return ret;
+	}
 
 	/*
 	 * The power down GPIO is optional. If present, toggle it from active to
@@ -998,8 +980,12 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 		return ret;
 	dev_dbg(dev, "Rev. %d\n", val);
 
-	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
-				    ARRAY_SIZE(adv7511_fixed_registers));
+	if (adv7511->type == ADV7511)
+		ret = regmap_register_patch(adv7511->regmap,
+					    adv7511_fixed_registers,
+					    ARRAY_SIZE(adv7511_fixed_registers));
+	else
+		ret = adv7533_patch_registers(adv7511);
 	if (ret)
 		return ret;
 
@@ -1014,6 +1000,12 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	if (!adv7511->i2c_edid)
 		return -ENOMEM;
 
+	if (adv7511->type == ADV7533) {
+		ret = adv7533_init_cec(adv7511);
+		if (ret)
+			goto err_i2c_unregister_edid;
+	}
+
 	if (i2c->irq) {
 		init_waitqueue_head(&adv7511->wq);
 
@@ -1022,7 +1014,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 						IRQF_ONESHOT, dev_name(dev),
 						adv7511);
 		if (ret)
-			goto err_i2c_unregister_device;
+			goto err_unregister_cec;
 	}
 
 	/* CEC is unused for now */
@@ -1033,7 +1025,8 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 
 	i2c_set_clientdata(i2c, adv7511);
 
-	adv7511_set_link_config(adv7511, &link_config);
+	if (adv7511->type == ADV7511)
+		adv7511_set_link_config(adv7511, &link_config);
 
 	adv7511->bridge.funcs = &adv7511_bridge_funcs;
 	adv7511->bridge.of_node = dev->of_node;
@@ -1041,12 +1034,14 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	ret = drm_bridge_add(&adv7511->bridge);
 	if (ret) {
 		dev_err(dev, "failed to add adv7511 bridge\n");
-		goto err_i2c_unregister_device;
+		goto err_unregister_cec;
 	}
 
 	return 0;
 
-err_i2c_unregister_device:
+err_unregister_cec:
+	adv7533_uninit_cec(adv7511);
+err_i2c_unregister_edid:
 	i2c_unregister_device(adv7511->i2c_edid);
 
 	return ret;
@@ -1058,6 +1053,7 @@ static int adv7511_remove(struct i2c_client *i2c)
 
 	drm_bridge_remove(&adv7511->bridge);
 
+	adv7533_uninit_cec(adv7511);
 	i2c_unregister_device(adv7511->i2c_edid);
 
 	kfree(adv7511->edid);
@@ -1066,17 +1062,23 @@ static int adv7511_remove(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id adv7511_i2c_ids[] = {
-	{ "adv7511", 0 },
-	{ "adv7511w", 0 },
-	{ "adv7513", 0 },
+	{ "adv7511", ADV7511 },
+	{ "adv7511w", ADV7511 },
+	{ "adv7513", ADV7511 },
+#ifdef CONFIG_DRM_I2C_ADV7533
+	{ "adv7533", ADV7533 },
+#endif
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
 
 static const struct of_device_id adv7511_of_ids[] = {
-	{ .compatible = "adi,adv7511", },
-	{ .compatible = "adi,adv7511w", },
-	{ .compatible = "adi,adv7513", },
+	{ .compatible = "adi,adv7511", .data = (void *)ADV7511 },
+	{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
+	{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
+#ifdef CONFIG_DRM_I2C_ADV7533
+	{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
+#endif
 	{ }
 };
 MODULE_DEVICE_TABLE(of, adv7511_of_ids);
diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/i2c/adv7511.h
index 38515b3..541c5d7 100644
--- a/drivers/gpu/drm/i2c/adv7511.h
+++ b/drivers/gpu/drm/i2c/adv7511.h
@@ -10,6 +10,10 @@
 #define __DRM_I2C_ADV7511_H__
 
 #include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_crtc_helper.h>
 
 #define ADV7511_REG_CHIP_REVISION		0x00
 #define ADV7511_REG_N0				0x01
@@ -286,4 +290,67 @@ struct adv7511_video_config {
 	struct hdmi_avi_infoframe avi_infoframe;
 };
 
+enum adv7511_type {
+	ADV7511,
+	ADV7533,
+};
+
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+	struct i2c_client *i2c_cec;
+
+	struct regmap *regmap;
+	struct regmap *regmap_cec;
+	enum drm_connector_status status;
+	bool powered;
+
+	unsigned int f_tmds;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+	bool edid_read;
+
+	wait_queue_head_t wq;
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct edid *edid;
+
+	struct gpio_desc *gpio_pd;
+
+	enum adv7511_type type;
+};
+
+#ifdef CONFIG_DRM_I2C_ADV7533
+void adv7533_dsi_power_on(struct adv7511 *adv);
+void adv7533_dsi_power_off(struct adv7511 *adv);
+int adv7533_patch_registers(struct adv7511 *adv);
+void adv7533_uninit_cec(struct adv7511 *adv);
+int adv7533_init_cec(struct adv7511 *adv);
+#else
+static inline void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+}
+static inline void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+}
+static inline int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+static inline void adv7533_uninit_cec(struct adv7511 *adv)
+{
+}
+static inline int adv7533_init_cec(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+#endif
+
 #endif /* __DRM_I2C_ADV7511_H__ */
diff --git a/drivers/gpu/drm/i2c/adv7533.c b/drivers/gpu/drm/i2c/adv7533.c
new file mode 100644
index 0000000..cb4ca64
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7533.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "adv7511.h"
+
+static const struct reg_sequence adv7533_fixed_registers[] = {
+	{ 0x16, 0x20 },
+	{ 0x9a, 0xe0 },
+	{ 0xba, 0x70 },
+	{ 0xde, 0x82 },
+	{ 0xe4, 0x40 },
+	{ 0xe5, 0x80 },
+};
+
+static const struct reg_sequence adv7533_cec_fixed_registers[] = {
+	{ 0x15, 0xd0 },
+	{ 0x17, 0xd0 },
+	{ 0x24, 0x20 },
+	{ 0x57, 0x11 },
+};
+
+static const struct regmap_config adv7533_cec_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+	/* set number of dsi lanes (hardcoded to 4 for now) */
+	regmap_write(adv->regmap_cec, 0x1c, 4 << 4);
+	/* disable internal timing generator */
+	regmap_write(adv->regmap_cec, 0x27, 0x0b);
+	/* enable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x89);
+	/* disable test mode */
+	regmap_write(adv->regmap_cec, 0x55, 0x00);
+
+	regmap_register_patch(adv->regmap_cec, adv7533_cec_fixed_registers,
+			      ARRAY_SIZE(adv7533_cec_fixed_registers));
+}
+
+void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+	/* disable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x0b);
+}
+
+int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return regmap_register_patch(adv->regmap,
+				     adv7533_fixed_registers,
+				     ARRAY_SIZE(adv7533_fixed_registers));
+}
+
+void adv7533_uninit_cec(struct adv7511 *adv)
+{
+	i2c_unregister_device(adv->i2c_cec);
+}
+
+static const int cec_i2c_addr = 0x78;
+
+int adv7533_init_cec(struct adv7511 *adv)
+{
+	int ret;
+
+	adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter, cec_i2c_addr >> 1);
+	if (!adv->i2c_cec)
+		return -ENOMEM;
+
+	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
+					&adv7533_cec_regmap_config);
+	if (IS_ERR(adv->regmap_cec)) {
+		ret = PTR_ERR(adv->regmap_cec);
+		goto err;
+	}
+
+	ret = regmap_register_patch(adv->regmap_cec,
+				    adv7533_cec_fixed_registers,
+				    ARRAY_SIZE(adv7533_cec_fixed_registers));
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	adv7533_uninit_cec(adv);
+	return ret;
+}
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-05-16 10:41 UTC|newest]

Thread overview: 89+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-27  6:16 [PATCH 0/5] drm/i2c: adv7511: ADV7533 support Archit Taneja
2015-07-27  6:16 ` [PATCH 1/5] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2015-07-27  6:16 ` [PATCH 2/5] drm/i2c: adv7511: Initial support for adv7533 Archit Taneja
2015-07-28  3:27   ` Bjorn Andersson
2015-08-03  5:39     ` Archit Taneja
2015-07-27  6:16 ` [PATCH 3/5] drm/i2c: adv7511: Refactor encoder slave functions Archit Taneja
2015-07-27  8:59   ` Laurent Pinchart
2015-07-28  8:17     ` Archit Taneja
2015-07-28 14:38       ` Boris Brezillon
2015-07-31  5:26         ` Archit Taneja
2015-07-31  9:12           ` Boris Brezillon
2015-07-31 10:38             ` Archit Taneja
2015-07-31 12:13             ` Rob Clark
2015-07-31 12:58               ` Boris Brezillon
2015-07-31 14:48                 ` Rob Clark
2015-08-03 12:03                   ` Andrzej Hajda
2015-08-03 14:04                     ` Rob Clark
2015-08-04  5:16                       ` Andrzej Hajda
2015-08-04 12:24                         ` Rob Clark
2015-09-02  6:30                           ` Archit Taneja
2015-12-03 15:02     ` Rob Clark
2015-12-03 15:28       ` Laurent Pinchart
2015-12-03 15:55         ` Rob Clark
2015-12-03 16:06           ` Laurent Pinchart
2015-12-03 16:11           ` Archit Taneja
2016-01-09 17:03             ` Archit Taneja
2015-07-27  6:16 ` [PATCH 4/5] drm/i2c: adv7511: Add drm_bridge/connector for ADV7533 Archit Taneja
2015-07-27  6:16 ` [PATCH 5/5] drm/i2c: adv7511: Create mipi_dsi_device " Archit Taneja
2015-09-07 11:36 ` [PATCH v2 0/5] drm/i2c: adv7511: ADV7533 support Archit Taneja
2015-09-07 11:36   ` [PATCH v2 1/5] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2015-09-07 11:36   ` [PATCH v2 2/5] drm/i2c: adv7511: Initial support for adv7533 Archit Taneja
2015-09-07 11:36   ` [PATCH v2 3/5] drm/i2c: adv7511: Refactor encoder slave functions Archit Taneja
2015-09-07 11:36   ` [PATCH v2 4/5] drm/i2c: adv7511: Add drm_bridge/connector for ADV7533 Archit Taneja
2015-09-07 11:36   ` [PATCH v2 5/5] drm/i2c: adv7511: Add dsi driver for adv7533 Archit Taneja
2016-03-09 10:57   ` [PATCH v3 0/7] drm/i2c: adv7511: ADV7533 support Archit Taneja
2016-03-09 10:57     ` [PATCH v3 1/7] drm/i2c: adv7511: Convert to drm_bridge Archit Taneja
2016-03-09 10:57     ` [PATCH v3 2/7] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2016-03-09 10:57     ` [PATCH v3 3/7] drm/i2c: adv7511: Initial support for ADV7533 Archit Taneja
2016-03-09 10:57     ` [PATCH v3 4/7] drm/i2c: adv7511: Create a MIPI DSI device Archit Taneja
2016-04-21 22:29       ` Laurent Pinchart
2016-04-22  5:10         ` Archit Taneja
2016-05-03  6:57           ` Archit Taneja
2016-05-09 20:38             ` Laurent Pinchart
2016-05-11 10:19               ` Archit Taneja
2016-03-09 10:57     ` [PATCH v3 5/7] drm/i2c: adv7511: Use internal timing generator Archit Taneja
2016-03-09 10:57     ` [PATCH v3 6/7] drm/i2c: adv7511: Change number of DSI lanes dynamically Archit Taneja
     [not found]     ` <1457521038-5906-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-03-09 10:57       ` [PATCH v3 7/7] dt-bindings: drm/bridge: Update bindings for ADV7533 Archit Taneja
2016-03-17 19:12         ` Rob Herring
2016-04-21 22:32         ` Laurent Pinchart
2016-04-22  5:40           ` Archit Taneja
     [not found]             ` <5719B942.8070907-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-05-16 12:01               ` Laurent Pinchart
2016-05-17  3:43                 ` Archit Taneja
2016-05-17  4:18                   ` Xinliang Liu
2016-05-24  5:15                     ` Archit Taneja
2016-04-14 14:56     ` [PATCH v3 0/7] drm/i2c: adv7511: ADV7533 support Archit Taneja
2016-04-21 22:33       ` Laurent Pinchart
2016-04-22  5:45         ` Archit Taneja
2016-04-17 11:31     ` Xinliang Liu
2016-04-18  9:48       ` Archit Taneja
2016-04-19  8:44         ` Xinliang Liu
2016-04-21 22:36         ` Laurent Pinchart
2016-04-22  5:44           ` Archit Taneja
2016-05-03  1:52     ` Xinliang Liu
2016-05-03  6:53       ` Archit Taneja
2016-05-16 10:41     ` [PATCH v4 " Archit Taneja
2016-05-16 10:41       ` [PATCH v4 1/7] drm/i2c: adv7511: Convert to drm_bridge Archit Taneja
2016-05-16 10:41       ` [PATCH v4 2/7] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2016-05-16 10:41       ` Archit Taneja [this message]
2016-05-16 10:41       ` [PATCH v4 4/7] drm/i2c: adv7533: Create a MIPI DSI device Archit Taneja
2016-05-16 10:41       ` [PATCH v4 5/7] drm/i2c: adv7533: Use internal timing generator Archit Taneja
2016-05-16 10:41       ` [PATCH v4 6/7] drm/i2c: adv7533: Change number of DSI lanes dynamically Archit Taneja
2016-05-16 10:41       ` [PATCH v4 7/7] dt-bindings: drm/bridge: Update bindings for ADV7533 Archit Taneja
2016-06-08 10:27       ` [PATCH v5 0/7] drm/i2c: adv7511: ADV7533 support Archit Taneja
2016-06-08 10:27         ` [PATCH v5 1/7] drm/i2c: adv7511: Convert to drm_bridge Archit Taneja
2016-06-08 10:27         ` [PATCH v5 2/7] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2016-06-08 10:27         ` [PATCH v5 3/7] drm/i2c: adv7511: Initial support for ADV7533 Archit Taneja
2016-06-08 10:27         ` [PATCH v5 4/7] drm/i2c: adv7533: Create a MIPI DSI device Archit Taneja
2016-06-08 10:27         ` [PATCH v5 5/7] drm/i2c: adv7533: Use internal timing generator Archit Taneja
2016-06-08 10:27         ` [PATCH v5 6/7] drm/i2c: adv7533: Change number of DSI lanes dynamically Archit Taneja
2016-06-08 10:27         ` [PATCH v5 7/7] dt-bindings: drm/bridge: Update bindings for ADV7533 Archit Taneja
2016-06-17  7:53         ` [PATCH v6 0/8] drm/i2c: adv7511: ADV7533 support Archit Taneja
2016-06-17  7:53           ` [PATCH v6 1/8] drm/i2c: adv7511: Convert to drm_bridge Archit Taneja
2016-06-17  7:53           ` [PATCH v6 2/8] drm/i2c: adv7511: Move to bridge folder Archit Taneja
2016-06-17  7:53           ` [PATCH v6 3/8] drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2016-06-17  7:53           ` [PATCH v6 4/8] drm/bridge: adv7533: Initial support for ADV7533 Archit Taneja
2016-06-17  7:53           ` [PATCH v6 5/8] drm/bridge: adv7533: Create a MIPI DSI device Archit Taneja
2016-06-17  7:53           ` [PATCH v6 6/8] drm/bridge: adv7533: Use internal timing generator Archit Taneja
2016-06-17  7:53           ` [PATCH v6 7/8] drm/bridge: adv7533: Change number of DSI lanes dynamically Archit Taneja
2016-06-17  7:53           ` [PATCH v6 8/8] dt-bindings: drm/bridge: Update bindings for ADV7533 Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463395270-3100-4-git-send-email-architt@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=amit.kucheria@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=treding@nvidia.com \
    --cc=xinliang.liu@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.