All of lore.kernel.org
 help / color / mirror / Atom feed
From: akash.goel@intel.com
To: intel-gfx@lists.freedesktop.org
Cc: Akash Goel <akash.goel@intel.com>
Subject: [PATCH 01/17] drm/i915: Decouple GuC log setup from verbosity parameter
Date: Sun, 10 Jul 2016 19:11:08 +0530	[thread overview]
Message-ID: <1468158084-22028-2-git-send-email-akash.goel@intel.com> (raw)
In-Reply-To: <1468158084-22028-1-git-send-email-akash.goel@intel.com>

From: Sagar Arun Kamble <sagar.a.kamble@intel.com>

GuC Log buffer allocation was tied up with verbosity level module param
i915.guc_log_level. User would be given a provision to enable firmware
logging at runtime, through a host2guc action, and not necessarily during
Driver load time. But the address of log buffer can be passed only in
init params, at firmware load time, so GuC has to be reset and firmware
needs to be reloaded to pass the log buffer address at runtime.
To avoid reset of GuC & reload of firmware, allocation of log buffer will
be done always but logging would be enabled initially on GuC side based on
the value of module paramter guc_log_level.

v2: Update commit message to describe the constraint with allocation of
    log buffer at runtime. (Tvrtko)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
---
 drivers/gpu/drm/i915/i915_guc_submission.c | 3 ---
 drivers/gpu/drm/i915/intel_guc_loader.c    | 8 +++++---
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index 2112e02..8a9a0cb 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -832,9 +832,6 @@ static void guc_create_log(struct intel_guc *guc)
 	unsigned long offset;
 	uint32_t size, flags;
 
-	if (i915.guc_log_level < GUC_LOG_VERBOSITY_MIN)
-		return;
-
 	if (i915.guc_log_level > GUC_LOG_VERBOSITY_MAX)
 		i915.guc_log_level = GUC_LOG_VERBOSITY_MAX;
 
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 605c696..b211bd0 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -175,11 +175,13 @@ static void set_guc_init_params(struct drm_i915_private *dev_priv)
 	params[GUC_CTL_FEATURE] |= GUC_CTL_DISABLE_SCHEDULER |
 			GUC_CTL_VCS2_ENABLED;
 
-	if (i915.guc_log_level >= 0) {
-		params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
+	params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
+
+	if (i915.guc_log_level >= 0)
 		params[GUC_CTL_DEBUG] =
 			i915.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
-	}
+	else
+		params[GUC_CTL_DEBUG] = GUC_LOG_DISABLED;
 
 	if (guc->ads_obj) {
 		u32 ads = (u32)i915_gem_obj_ggtt_offset(guc->ads_obj)
-- 
1.9.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-07-10 13:28 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-10 13:41 [PATCH v4 00/17] Support for sustained capturing of GuC firmware logs akash.goel
2016-07-10 13:41 ` akash.goel [this message]
2016-07-11  9:37   ` [PATCH 01/17] drm/i915: Decouple GuC log setup from verbosity parameter Tvrtko Ursulin
2016-07-11 11:41     ` Goel, Akash
2016-07-11 11:50       ` Tvrtko Ursulin
2016-07-11 12:11         ` Goel, Akash
2016-07-11 13:07           ` Tvrtko Ursulin
2016-07-10 13:41 ` [PATCH 02/17] drm/i915: Add GuC ukernel logging related fields to fw interface file akash.goel
2016-07-10 13:41 ` [PATCH 03/17] drm/i915: New structure to contain GuC logging related fields akash.goel
2016-07-10 13:41 ` [PATCH 04/17] drm/i915: Add low level set of routines for programming PM IER/IIR/IMR register set akash.goel
2016-07-11 10:04   ` Tvrtko Ursulin
2016-07-10 13:41 ` [PATCH 05/17] drm/i915: Support for GuC interrupts akash.goel
2016-07-11 10:30   ` Tvrtko Ursulin
2016-07-11 13:15     ` Goel, Akash
2016-07-11 13:23       ` Tvrtko Ursulin
2016-07-11 13:38         ` Goel, Akash
2016-07-11 13:43           ` Tvrtko Ursulin
2016-07-11 14:20             ` Goel, Akash
2016-07-10 13:41 ` [PATCH 06/17] drm/i915: Handle log buffer flush interrupt event from GuC akash.goel
2016-07-19 10:58   ` Tvrtko Ursulin
2016-07-20  3:29     ` Goel, Akash
2016-07-10 13:41 ` [PATCH 07/17] drm/i915: Add a relay backed debugfs interface for capturing GuC logs akash.goel
2016-07-10 17:07   ` kbuild test robot
2016-07-19 11:31   ` Tvrtko Ursulin
2016-07-20  3:41     ` Goel, Akash
2016-07-10 13:41 ` [PATCH 08/17] drm/i915: Forcefully flush GuC log buffer on reset akash.goel
2016-07-19 11:12   ` Tvrtko Ursulin
2016-07-19 11:21     ` Chris Wilson
2016-07-20  4:21       ` Goel, Akash
2016-07-20  9:12         ` Chris Wilson
2016-07-20  9:48           ` Goel, Akash
2016-07-10 13:41 ` [PATCH 09/17] drm/i915: Debugfs support for GuC logging control akash.goel
2016-07-10 17:59   ` kbuild test robot
2016-07-19 11:24   ` Tvrtko Ursulin
2016-07-20  4:42     ` Goel, Akash
2016-07-20  9:08       ` Tvrtko Ursulin
2016-07-20  9:32         ` Goel, Akash
2016-07-20  9:47           ` Tvrtko Ursulin
2016-07-20 10:12             ` Goel, Akash
2016-07-20 10:40               ` Tvrtko Ursulin
2016-07-20 11:29                 ` Goel, Akash
2016-07-20 11:50                   ` Tvrtko Ursulin
2016-07-20 12:16                     ` Goel, Akash
2016-07-10 13:41 ` [PATCH 10/17] drm/i915: New module param to control the size of buffer used for storing GuC firmware logs akash.goel
2016-07-15 11:15   ` Tvrtko Ursulin
2016-07-15 15:36     ` Goel, Akash
2016-07-18 10:06       ` Tvrtko Ursulin
2016-07-18 12:19         ` Goel, Akash
2016-07-18 13:06           ` Tvrtko Ursulin
2016-07-18 13:40             ` Goel, Akash
2016-07-10 13:41 ` [PATCH 11/17] drm/i915: Support to create write combined type vmaps akash.goel
2016-07-15 11:31   ` Tvrtko Ursulin
2016-07-15 11:45     ` Chris Wilson
2016-07-15 16:30     ` Goel, Akash
2016-07-18 10:18       ` Tvrtko Ursulin
2016-07-10 13:41 ` [PATCH 12/17] drm/i915: Use uncached(WC) mapping for acessing the GuC log buffer akash.goel
2016-07-10 13:41 ` [PATCH 13/17] drm/i915: New lock to serialize the Host2GuC actions akash.goel
2016-07-15 11:40   ` Tvrtko Ursulin
2016-07-15 15:51     ` Goel, Akash
2016-07-18 10:12       ` Tvrtko Ursulin
2016-07-18 10:46         ` Goel, Akash
2016-07-18 11:18           ` Tvrtko Ursulin
2016-07-18 11:31             ` Goel, Akash
2016-07-18 11:36               ` Tvrtko Ursulin
2016-07-10 13:41 ` [PATCH 14/17] drm/i915: Add stats for GuC log buffer flush interrupts akash.goel
2016-07-15 11:51   ` Tvrtko Ursulin
2016-07-15 15:58     ` Goel, Akash
2016-07-18 10:16       ` Tvrtko Ursulin
2016-07-18 10:59         ` Goel, Akash
2016-07-18 11:33           ` Tvrtko Ursulin
2016-07-18 11:47             ` Goel, Akash
2016-07-10 13:41 ` [PATCH 15/17] drm/i915: Increase GuC log buffer size to reduce " akash.goel
2016-07-15 11:57   ` Tvrtko Ursulin
2016-07-15 14:42     ` Goel, Akash
2016-07-15 15:07       ` Tvrtko Ursulin
2016-07-15 16:20         ` Goel, Akash
2016-07-18  9:54           ` Tvrtko Ursulin
2016-07-18 12:35             ` Goel, Akash
2016-07-18 13:08               ` Tvrtko Ursulin
2016-07-10 13:41 ` [PATCH 16/17] drm/i915: Optimization to reduce the sampling time of GuC log buffer akash.goel
2016-07-10 13:41 ` [PATCH 17/17] drm/i915: Use rt priority kthread to do GuC log buffer sampling akash.goel
2016-07-20 19:34   ` Chris Wilson
2016-07-21  3:41     ` Goel, Akash
2016-07-21  5:43       ` Chris Wilson
2016-07-21  6:18         ` Goel, Akash
2016-07-21  9:44           ` Tvrtko Ursulin
2016-07-10 14:12 ` ✗ Ro.CI.BAT: failure for Support for sustained capturing of GuC firmware logs (rev5) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468158084-22028-2-git-send-email-akash.goel@intel.com \
    --to=akash.goel@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.