From: kostap at marvell.com <kostap@marvell.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] mvebu: dts: a80x0: Sync the DB DTS with standard config A
Date: Tue, 28 Mar 2017 18:36:35 +0300 [thread overview]
Message-ID: <1490715395-24751-4-git-send-email-kostap@marvell.com> (raw)
In-Reply-To: <1490715395-24751-1-git-send-email-kostap@marvell.com>
From: Konstantin Porotchkin <kostap@marvell.com>
Sync the default configuration of Armada-8040-DB with
Marvell u-boot-2015 standard configuration "A" for the same board.
The standard configuration "A" enables 2 PCIe slots on CP0
and 3 PCIe slots on CP1.
This is the main configuration used for u-boot and Linux tests.
This patch also re-arranges the DTS file entries by grouping
all nodes related to CP0 and CP1.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
---
arch/arm/dts/armada-8040-db.dts | 222 +++++++++++++++++++++-------------------
1 file changed, 115 insertions(+), 107 deletions(-)
diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
index 40def9d..e1e6dfd 100644
--- a/arch/arm/dts/armada-8040-db.dts
+++ b/arch/arm/dts/armada-8040-db.dts
@@ -83,28 +83,68 @@
&cpm_pinctl {
/* MPP Bus:
- * [0-31] = 0xff: Keep default CP0_shared_pins:
- * [11] CLKOUT_MPP_11 (out)
- * [23] LINK_RD_IN_CP2CP (in)
- * [25] CLKOUT_MPP_25 (out)
- * [29] AVS_FB_IN_CP2CP (in)
- * [32,34] SMI
- * [31] GPIO: push button/Wake
- * [35-36] GPIO
- * [37-38] I2C
- * [40-41] SATA[0/1]_PRESENT_ACTIVEn
- * [42-43] XSMI
- * [44-55] RGMII1
- * [56-62] SD
+ * [0-31] = 0xff: Keep default CP0_shared_pins
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32,34] GE_MDIO/MDC
+ * [33] GPIO: GE_INT#/push button/Wake
+ * [35] MSS_GPIO[3]: MSS_PWDN
+ * [36] MSS_GPIO[5]: MSS_VTT_EN
+ * [37-38] I2C0
+ * [39] PTP_CLK
+ * [40-41] SATA[0/1]_PRESENT_ACTIVEn
+ * [42-43] XG_MDC/XG_MDIO (XSMI)
+ * [44-55] RGMII1
+ * [56-62] SD
*/
- /* 0 1 2 3 4 5 6 7 8 9 */
+ /* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
- 0xff 0 7 0 7 0 0 2 2 0
- 0 0 8 8 1 1 1 1 1 1
- 1 1 1 1 1 1 0xe 0xe 0xe 0xe
- 0xe 0xe 0xe >;
+ 0xff 0xff 0x7 0x0 0x7 0xa 0xa 0x2 0x2 0x5
+ 0x9 0x9 0x8 0x8 0x1 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe
+ 0xe 0xe 0xe>;
+};
+
+&cpm_comphy {
+ /* Serdes Configuration:
+ * Lane 0: PCIe0 (x1)
+ * Lane 1: SATA0
+ * Lane 2: KR (10G)
+ * Lane 3: SATA1
+ * Lane 4: USB3_HOST1
+ * Lane 5: PCIe2 (x1)
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_SATA0>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_KR>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_USB3_HOST1>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ };
+};
+
+/* CON6 on CP0 expansion */
+&cpm_pcie0 {
+ status = "okay";
+};
+
+&cpm_pcie1 {
+ status = "disabled";
};
/* CON5 on CP0 expansion */
@@ -134,21 +174,69 @@
status = "okay";
};
+&cpm_utmi0 {
+ status = "okay";
+};
+
+&cpm_utmi1 {
+ status = "okay";
+};
+
&cps_pinctl {
/* MPP Bus:
- * [0-11] RGMII0
- * [13-16] SPI1
- * [27,31] GE_MDIO/MDC
- * [32-62] = 0xff: Keep default CP1_shared_pins:
+ * [0-11] RGMII0
+ * [13-16] SPI1
+ * [27,31] GE_MDIO/MDC
+ * [28] SATA1_PRESENT_ACTIVEn
+ * [29-30] UART0
+ * [32-62] = 0xff: Keep default CP1_shared_pins
*/
- /* 0 1 2 3 4 5 6 7 8 9 */
+ /* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3
- 0x3 0x3 0xff 0x3 0x3 0x3 0x3 0xff 0xff 0xff
- 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0xff 0xff
- 0xff 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0x9 0xa
+ 0xA 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
- 0xff 0xff 0xff >;
+ 0xff 0xff 0xff>;
+};
+
+&cps_comphy {
+ /* Serdes Configuration:
+ * Lane 0: PCIe0 (x1)
+ * Lane 1: SATA0
+ * Lane 2: KR (10G)
+ * Lane 3: SATA1
+ * Lane 4: PCIe1 (x1)
+ * Lane 5: PCIe2 (x1)
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_SATA0>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_KR>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_PEX1>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ };
+};
+
+/* CON6 on CP1 expansion */
+&cps_pcie0 {
+ status = "okay";
+};
+
+&cps_pcie1 {
+ status = "okay";
};
/* CON5 on CP1 expansion */
@@ -200,86 +288,6 @@
status = "okay";
};
-&cpm_comphy {
- /*
- * Serdes Configuration:
- * Lane 0: SGMII2
- * Lane 1: USB3_HOST0
- * Lane 2: KR (10G)
- * Lane 3: SATA1
- * Lane 4: USB3_HOST1
- * Lane 5: PEX2x1
- */
- phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
- };
-
- phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- };
-
- phy2 {
- phy-type = <PHY_TYPE_KR>;
- };
-
- phy3 {
- phy-type = <PHY_TYPE_SATA1>;
- };
-
- phy4 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
- };
-
- phy5 {
- phy-type = <PHY_TYPE_PEX2>;
- };
-};
-
-&cps_comphy {
- /*
- * Serdes Configuration:
- * Lane 0: SGMII2
- * Lane 1: USB3_HOST0
- * Lane 2: KR (10G)
- * Lane 3: SATA1
- * Lane 4: Unconnected
- * Lane 5: PEX2x1
- */
- phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
- };
-
- phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- };
-
- phy2 {
- phy-type = <PHY_TYPE_KR>;
- };
-
- phy3 {
- phy-type = <PHY_TYPE_SATA1>;
- };
-
- phy4 {
- phy-type = <PHY_TYPE_UNCONNECTED>;
- };
-
- phy5 {
- phy-type = <PHY_TYPE_PEX2>;
- };
-};
-
-&cpm_utmi0 {
- status = "okay";
-};
-
-&cpm_utmi1 {
- status = "okay";
-};
-
&cps_utmi0 {
status = "okay";
};
--
2.7.4
next prev parent reply other threads:[~2017-03-28 15:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-28 15:36 [U-Boot] [PATCH 0/3] Marvell A7K/A8K PCIe fixes and extensions kostap at marvell.com
2017-03-28 15:36 ` [U-Boot] [PATCH 1/3] arm64: mvebu: Trigger PCI devices scan at early init stage kostap at marvell.com
2017-03-30 13:31 ` Stefan Roese
2017-03-30 13:58 ` Konstantin Porotchkin
2017-04-01 4:23 ` Simon Glass
2017-04-02 11:50 ` [U-Boot] [EXT] " Konstantin Porotchkin
2017-04-09 19:27 ` Simon Glass
2017-03-28 15:36 ` [U-Boot] [PATCH 2/3] fix: mvebu: pcie_dw: Allow probing empty PCIe slots kostap at marvell.com
2017-03-30 13:39 ` Stefan Roese
2017-05-09 14:42 ` Stefan Roese
2017-03-28 15:36 ` kostap at marvell.com [this message]
2017-03-30 13:40 ` [U-Boot] [PATCH 3/3] mvebu: dts: a80x0: Sync the DB DTS with standard config A Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490715395-24751-4-git-send-email-kostap@marvell.com \
--to=kostap@marvell.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.