All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhao Qiang <qiang.zhao@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4] QE: add QE support on SD boot
Date: Tue, 16 May 2017 09:27:46 +0800	[thread overview]
Message-ID: <1494898066-11825-1-git-send-email-qiang.zhao@nxp.com> (raw)

modify u_qe_init to upload QE firmware from SD card when it is SD
boot

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
Changes for v2:
	- fix issue of memory leak
Changes for v3:
	- add CONFIG_SYS_QE_FMAN_FW_IN_NOR to ls1021a
Changes for v4:
	- rebase due to memory-mapping conflict

 drivers/qe/qe.c                  | 37 ++++++++++++++++++++++++++++++++++++-
 include/configs/ls1021aqds.h     |  1 +
 include/configs/ls1021atwr.h     |  1 +
 include/configs/ls1043a_common.h |  2 ++
 include/configs/ls1043ardb.h     |  4 +---
 5 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 4f0a278..52e4d7c 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -8,6 +8,7 @@
  */
 
 #include <common.h>
+#include <malloc.h>
 #include <command.h>
 #include <linux/errno.h>
 #include <asm/io.h>
@@ -17,6 +18,10 @@
 #include <asm/arch/immap_ls102xa.h>
 #endif
 
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#include <mmc.h>
+#endif
+
 #define MPC85xx_DEVDISR_QE_DISABLE	0x1
 
 qe_map_t		*qe_immr = NULL;
@@ -194,8 +199,38 @@ void u_qe_init(void)
 {
 	qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
 
-	u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
+#if defined(CONFIG_SYS_QE_FMAN_FW_IN_NOR)
+	void *addr = (void *)CONFIG_SYS_QE_FW_ADDR;
+#elif defined(CONFIG_SYS_QE_FMAN_FW_IN_MMC)
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
+	void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
+	u32 cnt = CONFIG_SYS_QE_FMAN_FW_LENGTH / 512;
+	u32 blk = CONFIG_SYS_QE_FW_ADDR / 512;
+
+	if (mmc_initialize(gd->bd)) {
+		printf("%s: mmc_initialize() failed\n", __func__);
+		return;
+	}
+	struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+
+	if (!mmc) {
+		free(addr);
+		printf("\nMMC cannot find device for ucode\n");
+	} else {
+		printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
+		       dev, blk, cnt);
+		mmc_init(mmc);
+		(void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt,
+						addr);
+		/* flush cache after read */
+		flush_cache((ulong)addr, cnt * 512);
+	}
+#endif
+	u_qe_upload_firmware(addr);
 	out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
+	free(addr);
+#endif
 }
 #endif
 
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 5fcaf85..fb077fb 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -125,6 +125,7 @@ unsigned long get_board_ddr_clk(void);
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
 #define CONFIG_U_QE
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #endif
 
 /*
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 2a20dec..240c2e2 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -150,6 +150,7 @@
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
 #define CONFIG_U_QE
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #endif
 
 /*
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 155da92..56f5ee6 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -219,6 +219,7 @@
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x4800)
+#define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4a08)
 #elif defined(CONFIG_QSPI_BOOT)
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR		0x40900000
@@ -230,6 +231,7 @@
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 /* FMan fireware Pre-load address */
 #define CONFIG_SYS_FMAN_FW_ADDR		0x60900000
+#define CONFIG_SYS_QE_FW_ADDR		0x60940000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index a162378..2ce7ddd 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -277,11 +277,9 @@
 
 /* QE */
 #ifndef SPL_NO_QE
-#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
-	!defined(CONFIG_QSPI_BOOT)
+#if !defined(CONFIG_NAND_BOOT) && !defined(CONFIG_QSPI_BOOT)
 #define CONFIG_U_QE
 #endif
-#define CONFIG_SYS_QE_FW_ADDR     0x60940000
 #endif
 
 /* USB */
-- 
2.1.0.27.g96db324

             reply	other threads:[~2017-05-16  1:27 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-16  1:27 Zhao Qiang [this message]
2017-05-24 15:23 ` [U-Boot] [PATCH v4] QE: add QE support on SD boot york sun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1494898066-11825-1-git-send-email-qiang.zhao@nxp.com \
    --to=qiang.zhao@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.