All of lore.kernel.org
 help / color / mirror / Atom feed
From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
	linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
	rjliao@codeaurora.org, hbandi@codeaurora.org,
	abhishekpandit@chromium.org,
	Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Subject: [PATCH v4] Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC
Date: Tue,  8 Dec 2020 17:25:29 +0530	[thread overview]
Message-ID: <1607428529-26629-1-git-send-email-gubbaven@codeaurora.org> (raw)

Add support to read FW build version from debugfs node.
This info can be read from
/sys/kernel/debug/bluetooth/hci0/firmware_info

Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
 drivers/bluetooth/btqca.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btqca.h |  1 +
 2 files changed, 55 insertions(+)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index f85a55a..f6256a3 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -94,6 +94,53 @@ int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
 }
 EXPORT_SYMBOL_GPL(qca_read_soc_version);
 
+static int qca_read_fw_build_info(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct edl_event_hdr *edl;
+	char cmd, build_label[QCA_FW_BUILD_VER_LEN];
+	int build_lbl_len, err = 0;
+
+	bt_dev_dbg(hdev, "QCA read fw build info");
+
+	cmd = EDL_GET_BUILD_INFO_CMD;
+	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+				&cmd, 0, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Reading QCA fw build info failed (%d)",
+			   err);
+		return err;
+	}
+
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		bt_dev_err(hdev, "QCA read fw build info with no header");
+		err = -EILSEQ;
+		goto out;
+	}
+
+	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+	    edl->rtype != EDL_GET_BUILD_INFO_CMD) {
+		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+			   edl->rtype);
+		err = -EIO;
+		goto out;
+	}
+
+	build_lbl_len = edl->data[0];
+	if (build_lbl_len <= QCA_FW_BUILD_VER_LEN - 1) {
+		memcpy(build_label, edl->data + 1, build_lbl_len);
+		*(build_label + build_lbl_len) = '\0';
+	}
+
+	hci_set_fw_info(hdev, "%s", build_label);
+
+out:
+	kfree_skb(skb);
+	return err;
+}
+
 static int qca_send_reset(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -524,6 +571,13 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		return err;
 	}
 
+	if (soc_type == QCA_WCN3991) {
+		/* get fw build info */
+		err = qca_read_fw_build_info(hdev);
+		if (err < 0)
+			return err;
+	}
+
 	bt_dev_info(hdev, "QCA setup on UART is completed");
 
 	return 0;
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index e73b8f8..b19add7 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -11,6 +11,7 @@
 #define EDL_PATCH_CMD_LEN		(1)
 #define EDL_PATCH_VER_REQ_CMD		(0x19)
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
+#define EDL_GET_BUILD_INFO_CMD		(0x20)
 #define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
 #define MAX_SIZE_PER_TLV_SEGMENT	(243)
 #define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


             reply	other threads:[~2020-12-08 11:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-08 11:55 Venkata Lakshmi Narayana Gubba [this message]
2020-12-08 13:54 ` [v4] Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC bluez.test.bot
2020-12-18 21:24 ` [PATCH v4] " Marcel Holtmann
2021-03-01 19:59 ` patchwork-bot+linux-arm-msm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1607428529-26629-1-git-send-email-gubbaven@codeaurora.org \
    --to=gubbaven@codeaurora.org \
    --cc=abhishekpandit@chromium.org \
    --cc=bgodavar@codeaurora.org \
    --cc=hbandi@codeaurora.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mka@chromium.org \
    --cc=rjliao@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.