From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ye Li Date: Thu, 18 Feb 2021 23:07:45 -0800 Subject: [PATCH 7/9] imx8mp_evk: Remove EQoS PHY reset codes In-Reply-To: <1613718467-88336-1-git-send-email-ye.li@nxp.com> References: <1613718467-88336-1-git-send-email-ye.li@nxp.com> Message-ID: <1613718467-88336-7-git-send-email-ye.li@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Since we uses the DTS and PHY reset gpio in EQoS driver to do the reset, remove the duplicated codes from board file. Signed-off-by: Ye Li --- board/freescale/imx8mp_evk/imx8mp_evk.c | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/board/freescale/imx8mp_evk/imx8mp_evk.c b/board/freescale/imx8mp_evk/imx8mp_evk.c index bc4753c..62096c2 100644 --- a/board/freescale/imx8mp_evk/imx8mp_evk.c +++ b/board/freescale/imx8mp_evk/imx8mp_evk.c @@ -54,30 +54,11 @@ static void setup_fec(void) setbits_le32(&gpr->gpr[1], BIT(22)); } -#define EQOS_RST_PAD IMX_GPIO_NR(4, 22) -static iomux_v3_cfg_t const eqos_rst_pads[] = { - MX8MP_PAD_SAI2_RXC__GPIO4_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static void setup_iomux_eqos(void) -{ - imx_iomux_v3_setup_multiple_pads(eqos_rst_pads, - ARRAY_SIZE(eqos_rst_pads)); - - gpio_request(EQOS_RST_PAD, "eqos_rst"); - gpio_direction_output(EQOS_RST_PAD, 0); - mdelay(15); - gpio_direction_output(EQOS_RST_PAD, 1); - mdelay(100); -} - static int setup_eqos(void) { struct iomuxc_gpr_base_regs *gpr = (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - setup_iomux_eqos(); - /* set INTF as RGMII, enable RGMII TXC clock */ clrsetbits_le32(&gpr->gpr[1], IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); -- 2.7.4