All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maulik Shah <mkshah@codeaurora.org>
To: swboyd@chromium.org, mka@chromium.org, evgreen@chromium.org,
	bjorn.andersson@linaro.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	agross@kernel.org, dianders@chromium.org, linux@roeck-us.net,
	rnayak@codeaurora.org, lsrao@codeaurora.org,
	Mahesh Sivasubramanian <msivasub@codeaurora.org>,
	Lina Iyer <ilina@codeaurora.org>,
	Maulik Shah <mkshah@codeaurora.org>
Subject: [PATCH v8 2/5] soc: qcom: Add SoC sleep stats driver
Date: Fri, 21 May 2021 16:56:08 +0530	[thread overview]
Message-ID: <1621596371-26482-3-git-send-email-mkshah@codeaurora.org> (raw)
In-Reply-To: <1621596371-26482-1-git-send-email-mkshah@codeaurora.org>

From: Mahesh Sivasubramanian <msivasub@codeaurora.org>

Let's add a driver to read the stats from remote processor and
export to debugfs.

The driver creates "qcom_sleep_stats" directory in debugfs and
adds files for various low power mode available. Below is sample
output with command

cat /sys/kernel/debug/qcom_sleep_stats/ddr
count = 0
Last Entered At = 0
Last Exited At = 0
Accumulated Duration = 0

Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[mkshah: add subsystem sleep stats, create one file for each stat]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/soc/qcom/Kconfig           |  10 ++
 drivers/soc/qcom/Makefile          |   1 +
 drivers/soc/qcom/soc_sleep_stats.c | 255 +++++++++++++++++++++++++++++++++++++
 3 files changed, 266 insertions(+)
 create mode 100644 drivers/soc/qcom/soc_sleep_stats.c

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 79b568f..e80b63a 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -190,6 +190,16 @@ config QCOM_SOCINFO
 	 Say yes here to support the Qualcomm socinfo driver, providing
 	 information about the SoC to user space.
 
+config QCOM_SOC_SLEEP_STATS
+	tristate "Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver"
+	depends on ARCH_QCOM && DEBUG_FS || COMPILE_TEST
+	depends on QCOM_SMEM
+	help
+	  Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver to read
+	  the shared memory exported by the remote processor related to
+	  various SoC level low power modes statistics and export to debugfs
+	  interface.
+
 config QCOM_WCNSS_CTRL
 	tristate "Qualcomm WCNSS control driver"
 	depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index ad675a6..5f30d74 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
 obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
 obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
 obj-$(CONFIG_QCOM_SOCINFO)	+= socinfo.o
+obj-$(CONFIG_QCOM_SOC_SLEEP_STATS)	+= soc_sleep_stats.o
 obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
 obj-$(CONFIG_QCOM_APR) += apr.o
 obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
diff --git a/drivers/soc/qcom/soc_sleep_stats.c b/drivers/soc/qcom/soc_sleep_stats.c
new file mode 100644
index 0000000..a8396f9
--- /dev/null
+++ b/drivers/soc/qcom/soc_sleep_stats.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2011-2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/soc/qcom/smem.h>
+#include <clocksource/arm_arch_timer.h>
+
+#define STAT_TYPE_OFFSET	0x0
+#define COUNT_OFFSET		0x4
+#define LAST_ENTERED_AT_OFFSET	0x8
+#define LAST_EXITED_AT_OFFSET	0x10
+#define ACCUMULATED_OFFSET	0x18
+#define CLIENT_VOTES_OFFSET	0x1c
+
+struct subsystem_data {
+	const char *name;
+	u32 smem_item;
+	u32 pid;
+};
+
+static const struct subsystem_data subsystems[] = {
+	{ "modem", 605, 1 },
+	{ "wpss", 605, 13 },
+	{ "adsp", 606, 2 },
+	{ "cdsp", 607, 5 },
+	{ "slpi", 608, 3 },
+	{ "gpu", 609, 0 },
+	{ "display", 610, 0 },
+	{ "adsp_island", 613, 2 },
+	{ "slpi_island", 613, 3 },
+};
+
+struct stats_config {
+	size_t offset_addr;
+	size_t num_records;
+	bool appended_stats_avail;
+};
+
+struct stats_data {
+	bool appended_stats_avail;
+	void __iomem *base;
+};
+
+struct sleep_stats {
+	u32 stat_type;
+	u32 count;
+	u64 last_entered_at;
+	u64 last_exited_at;
+	u64 accumulated;
+};
+
+struct appended_stats {
+	u32 client_votes;
+	u32 reserved[3];
+};
+
+static void qcom_print_stats(struct seq_file *s, const struct sleep_stats *stat)
+{
+	u64 accumulated = stat->accumulated;
+	/*
+	 * If a subsystem is in sleep when reading the sleep stats adjust
+	 * the accumulated sleep duration to show actual sleep time.
+	 */
+	if (stat->last_entered_at > stat->last_exited_at)
+		accumulated += arch_timer_read_counter() - stat->last_entered_at;
+
+	seq_printf(s, "Count: %u\n", stat->count);
+	seq_printf(s, "Last Entered At: %llu\n", stat->last_entered_at);
+	seq_printf(s, "Last Exited At: %llu\n", stat->last_exited_at);
+	seq_printf(s, "Accumulated Duration: %llu\n", accumulated);
+}
+
+static int qcom_subsystem_sleep_stats_show(struct seq_file *s, void *unused)
+{
+	struct subsystem_data *subsystem = s->private;
+	struct sleep_stats *stat;
+
+	/* Items are allocated lazily, so lookup pointer each time */
+	stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL);
+	if (IS_ERR(stat))
+		return PTR_ERR(stat);
+
+	qcom_print_stats(s, stat);
+
+	return 0;
+}
+
+static int qcom_soc_sleep_stats_show(struct seq_file *s, void *unused)
+{
+	struct stats_data *d = s->private;
+	void __iomem *reg = d->base;
+	struct sleep_stats stat;
+
+	memcpy_fromio(&stat, reg, sizeof(stat));
+	qcom_print_stats(s, &stat);
+
+	if (d->appended_stats_avail) {
+		struct appended_stats votes;
+
+		memcpy_fromio(&votes, reg + CLIENT_VOTES_OFFSET, sizeof(votes));
+		seq_printf(s, "Client Votes: %#x\n", votes.client_votes);
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(qcom_soc_sleep_stats);
+DEFINE_SHOW_ATTRIBUTE(qcom_subsystem_sleep_stats);
+
+static void qcom_create_soc_sleep_stat_files(struct dentry *root, void __iomem *reg,
+					     struct stats_data *d, u32 num_records)
+{
+	char stat_type[sizeof(u32) + 1] = {0};
+	u32 offset = 0, type;
+	int i, j;
+
+	for (i = 0; i < num_records; i++) {
+		d[i].base = reg + offset;
+
+		/*
+		 * Read the low power mode name and create debugfs file for it.
+		 * The names read could be of below,
+		 * (may change depending on low power mode supported).
+		 * For rpmh-sleep-stats: "aosd", "cxsd" and "ddr".
+		 * For rpm-sleep-stats: "vmin" and "vlow".
+		 */
+		type = readl(d[i].base);
+		for (j = 0; j < sizeof(u32); j++) {
+			stat_type[j] = type & 0xff;
+			type = type >> 8;
+		}
+		strim(stat_type);
+		debugfs_create_file(stat_type, 0400, root, &d[i],
+				    &qcom_soc_sleep_stats_fops);
+
+		offset += sizeof(struct sleep_stats);
+		if (d[i].appended_stats_avail)
+			offset += sizeof(struct appended_stats);
+	}
+}
+
+static void qcom_create_subsystem_stat_files(struct dentry *root)
+{
+	struct sleep_stats *stat;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(subsystems); i++) {
+		stat = qcom_smem_get(subsystems[i].pid, subsystems[i].smem_item, NULL);
+		if (IS_ERR(stat))
+			continue;
+
+		debugfs_create_file(subsystems[i].name, 0400, root, (void *)&subsystems[i],
+				    &qcom_subsystem_sleep_stats_fops);
+	}
+}
+
+static int qcom_soc_sleep_stats_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *reg;
+	void __iomem *offset_addr;
+	phys_addr_t stats_base;
+	resource_size_t stats_size;
+	struct dentry *root;
+	const struct stats_config *config;
+	struct stats_data *d;
+	int i;
+
+	config = device_get_match_data(&pdev->dev);
+	if (!config)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return PTR_ERR(res);
+
+	offset_addr = ioremap(res->start + config->offset_addr, sizeof(u32));
+	if (IS_ERR(offset_addr))
+		return PTR_ERR(offset_addr);
+
+	stats_base = res->start | readl_relaxed(offset_addr);
+	stats_size = resource_size(res);
+	iounmap(offset_addr);
+
+	reg = devm_ioremap(&pdev->dev, stats_base, stats_size);
+	if (!reg)
+		return -ENOMEM;
+
+	d = devm_kcalloc(&pdev->dev, config->num_records,
+			 sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	for (i = 0; i < config->num_records; i++)
+		d[i].appended_stats_avail = config->appended_stats_avail;
+
+	root = debugfs_create_dir("qcom_sleep_stats", NULL);
+
+	qcom_create_subsystem_stat_files(root);
+	qcom_create_soc_sleep_stat_files(root, reg, d, config->num_records);
+
+	platform_set_drvdata(pdev, root);
+
+	return 0;
+}
+
+static int qcom_soc_sleep_stats_remove(struct platform_device *pdev)
+{
+	struct dentry *root = platform_get_drvdata(pdev);
+
+	debugfs_remove_recursive(root);
+
+	return 0;
+}
+
+static const struct stats_config rpm_data = {
+	.offset_addr = 0x14,
+	.num_records = 2,
+	.appended_stats_avail = true,
+};
+
+static const struct stats_config rpmh_data = {
+	.offset_addr = 0x4,
+	.num_records = 3,
+	.appended_stats_avail = false,
+};
+
+static const struct of_device_id qcom_soc_sleep_stats_table[] = {
+	{ .compatible = "qcom,rpm-sleep-stats", .data = &rpm_data },
+	{ .compatible = "qcom,rpmh-sleep-stats", .data = &rpmh_data },
+	{ }
+};
+
+static struct platform_driver soc_sleep_stats_driver = {
+	.probe = qcom_soc_sleep_stats_probe,
+	.remove = qcom_soc_sleep_stats_remove,
+	.driver = {
+		.name = "soc_sleep_stats",
+		.of_match_table = qcom_soc_sleep_stats_table,
+	},
+};
+module_platform_driver(soc_sleep_stats_driver);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) SoC Sleep Stats driver");
+MODULE_LICENSE("GPL v2");
+MODULE_SOFTDEP("pre: smem");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2021-05-21 11:26 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 11:26 [PATCH v8 0/5] Introduce SoC sleep stats driver Maulik Shah
2021-05-21 11:26 ` [PATCH v8 1/5] dt-bindings: Introduce SoC sleep stats bindings Maulik Shah
2021-05-21 11:26 ` Maulik Shah [this message]
2021-05-26 23:45   ` [PATCH v8 2/5] soc: qcom: Add SoC sleep stats driver Stephen Boyd
2021-09-05 12:59     ` Maulik Shah
2021-05-31 17:30   ` Bjorn Andersson
2021-05-21 11:26 ` [PATCH v8 3/5] arm64: dts: qcom: sc7180: Enable SoC sleep stats Maulik Shah
2021-05-26 23:30   ` Stephen Boyd
2021-05-31 17:57     ` Bjorn Andersson
2021-06-03  0:26       ` Stephen Boyd
2021-06-03  2:44         ` Bjorn Andersson
2021-06-04 21:53           ` Stephen Boyd
2021-06-06  3:42             ` Bjorn Andersson
2021-09-05 12:59               ` Maulik Shah
2021-05-21 11:26 ` [PATCH v8 4/5] arm64: defconfig: Enable SoC sleep stats driver Maulik Shah
2021-05-26 23:30   ` Stephen Boyd
2021-05-21 11:26 ` [PATCH v8 5/5] arm64: dts: qcom: sc7280: Enable SoC sleep stats Maulik Shah
2021-05-26 23:30   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1621596371-26482-3-git-send-email-mkshah@codeaurora.org \
    --to=mkshah@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=ilina@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lsrao@codeaurora.org \
    --cc=mka@chromium.org \
    --cc=msivasub@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.