All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: ulf.hansson@linaro.org, bjorn.andersson@linaro.org,
	viresh.kumar@linaro.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	swboyd@chromium.org, rojay@codeaurora.org, stephan@gerhold.net,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v5 2/2] arm64: dts: sc7180: Add required-opps for i2c
Date: Tue, 20 Jul 2021 12:37:56 +0530	[thread overview]
Message-ID: <1626764876-10229-3-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1626764876-10229-1-git-send-email-rnayak@codeaurora.org>

qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 MHz)
Though qup-i2c does not support DVFS, it still needs to vote for a
performance state on 'CX' to satisfy the 19.2 Mhz clock frequency
requirement.

Use 'required-opps' to pass this information from
device tree, and also add the power-domains property to specify
the CX power-domain.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a5d58eb..cd30185 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -785,8 +785,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi0: spi@880000 {
@@ -837,8 +839,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi1: spi@884000 {
@@ -889,8 +893,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart2: serial@888000 {
@@ -923,8 +929,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi3: spi@88c000 {
@@ -975,8 +983,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart4: serial@890000 {
@@ -1009,8 +1019,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi5: spi@894000 {
@@ -1074,8 +1086,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi6: spi@a80000 {
@@ -1126,8 +1140,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart7: serial@a84000 {
@@ -1160,8 +1176,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi8: spi@a88000 {
@@ -1212,8 +1230,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			uart9: serial@a8c000 {
@@ -1246,8 +1266,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi10: spi@a90000 {
@@ -1298,8 +1320,10 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				status = "disabled";
 			};
 
 			spi11: spi@a94000 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


      parent reply	other threads:[~2021-07-20  7:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-20  7:07 [PATCH v5 0/2] PM / Domains: Add support for 'required-opps' to set default perf state Rajendra Nayak
2021-07-20  7:07 ` [PATCH v5 1/2] " Rajendra Nayak
2021-07-20  7:18   ` Felipe Balbi
2021-08-02 12:59   ` Ulf Hansson
2021-08-03  4:38     ` Rajendra Nayak
2021-08-04 11:08       ` Rajendra Nayak
2021-08-04 11:39         ` Ulf Hansson
2021-08-05  4:05           ` Viresh Kumar
2021-07-20  7:07 ` Rajendra Nayak [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1626764876-10229-3-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rojay@codeaurora.org \
    --cc=stephan@gerhold.net \
    --cc=swboyd@chromium.org \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.