All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajesh Patil <rajpat@codeaurora.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, rnayak@codeaurora.org,
	saiprakash.ranjan@codeaurora.org, msavaliy@qti.qualcomm.com,
	skakit@codeaurora.org, Roja Rani Yarubandi <rojay@codeaurora.org>,
	Rajesh Patil <rajpat@codeaurora.org>
Subject: [PATCH V4 3/4] arm64: dts: sc7280: Update QUPv3 Debug UART DT node
Date: Mon, 26 Jul 2021 19:10:46 +0530	[thread overview]
Message-ID: <1627306847-25308-4-git-send-email-rajpat@codeaurora.org> (raw)
In-Reply-To: <1627306847-25308-1-git-send-email-rajpat@codeaurora.org>

From: Roja Rani Yarubandi <rojay@codeaurora.org>

Update QUPv3 Debug UART DT node with the interconnect names and
functions for SC7280 SoC.

Split the Debug UART pin control functions.

Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
---
Changes in V4:
 - As per Bjorn's comment, posting this debug-uart node update
   as seperate patch

 arch/arm64/boot/dts/qcom/sc7280-idp.dts | 18 +++++++-----------
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 28 ++++++++++++++++++++++++----
 2 files changed, 31 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index f63cf51..a50c9e5 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -383,18 +383,14 @@
 	bias-pull-up;
 };
 
-&qup_uart5_default {
-	tx {
-		pins = "gpio46";
-		drive-strength = <2>;
-		bias-disable;
-	};
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
 
-	rx {
-		pins = "gpio47";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-pull-up;
 };
 
 &sdc1_on {
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 455e58f..951818f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -853,8 +853,13 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart5_default>;
+				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -2234,9 +2239,24 @@
 				function = "qup04";
 			};
 
-			qup_uart5_default: qup-uart5-default {
-				pins = "gpio46", "gpio47";
-				function = "qup13";
+			qup_uart5_cts: qup-uart5-cts {
+				pins = "gpio20";
+				function = "qup05";
+			};
+
+			qup_uart5_rts: qup-uart5-rts {
+				pins = "gpio21";
+				function = "qup05";
+			};
+
+			qup_uart5_tx: qup-uart5-tx {
+				pins = "gpio22";
+				function = "qup05";
+			};
+
+			qup_uart5_rx: qup-uart5-rx {
+				pins = "gpio23";
+				function = "qup05";
 			};
 
 			qup_uart6_cts: qup-uart6-cts {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2021-07-26 13:42 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26 13:40 [PATCH V4 0/4] Add QSPI and QUPv3 DT nodes for SC7280 SoC Rajesh Patil
2021-07-26 13:40 ` [PATCH V4 1/4] arm64: dts: sc7280: Add QSPI node Rajesh Patil
2021-07-26 16:07   ` Matthias Kaehlcke
2021-08-11 12:14     ` rajpat
2021-07-26 13:40 ` [PATCH V4 2/4] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes Rajesh Patil
2021-07-26 16:02   ` Matthias Kaehlcke
2021-08-11 12:13     ` rajpat
2021-08-11 14:52       ` Matthias Kaehlcke
2021-08-12  7:13         ` rajpat
2021-08-12 12:49           ` Matthias Kaehlcke
2021-07-27 19:20   ` Stephen Boyd
2021-08-11 12:17     ` rajpat
2021-07-26 13:40 ` Rajesh Patil [this message]
2021-07-26 15:42   ` [PATCH V4 3/4] arm64: dts: sc7280: Update QUPv3 Debug UART DT node Matthias Kaehlcke
2021-08-11 12:04     ` rajpat
2021-07-26 13:40 ` [PATCH V4 4/4] arm64: dts: sc7280: Add QUPv3 wrapper_1 nodes Rajesh Patil
2021-07-27  0:14 ` [PATCH V4 0/4] Add QSPI and QUPv3 DT nodes for SC7280 SoC Stephen Boyd
2021-08-11 12:14   ` rajpat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1627306847-25308-4-git-send-email-rajpat@codeaurora.org \
    --to=rajpat@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=msavaliy@qti.qualcomm.com \
    --cc=rnayak@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rojay@codeaurora.org \
    --cc=saiprakash.ranjan@codeaurora.org \
    --cc=skakit@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.