All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Simmons <jsimmons@infradead.org>
To: Andreas Dilger <adilger@whamcloud.com>,
	Oleg Drokin <green@whamcloud.com>, NeilBrown <neilb@suse.de>
Cc: Patrick Farrell <farr0186@gmail.com>,
	Lustre Development List <lustre-devel@lists.lustre.org>
Subject: [lustre-devel] [PATCH 15/25] lustre: osc: Improve osc_queue_sync_pages
Date: Mon,  2 Aug 2021 15:50:35 -0400	[thread overview]
Message-ID: <1627933851-7603-16-git-send-email-jsimmons@infradead.org> (raw)
In-Reply-To: <1627933851-7603-1-git-send-email-jsimmons@infradead.org>

From: Patrick Farrell <farr0186@gmail.com>

This patch was split and partially done in:
https://review.whamcloud.com/38214

So the text below refers to the combination of this patch
and that one.  This patch now just improves a looped atomic
add by replacing with a single one.  The rest of the grant
calcuation change is in
https://review.whamcloud.com/38214

(I am retaining the text below to show the performance
 improvement)
----------
osc_queue_sync_pages now has a grant calculation component,
this has a pretty painful impact on the new faster DIO
performance.  Specifically, per page ktime_get() and the
per-page atomic_add cost close to 10% of total CPU time in
the DIO path.

We can make this per batch of pages rather than for each
page, which reduces this cost from 10% of CPU to almost
nothing.

This improves write performance by about 10% (but has no
effect on reads, since they don't use grant).

This patch reduces i/o time in ms/GiB by:
Write: 10 ms/GiB
Read: 0 ms/GiB

Totals:
Write: 158 ms/GiB
Read: 161 ms/GiB

mpirun -np 1 $IOR -w -t 1G -b 64G -o $FILE --posix.odirect

Before patch:
write     6071

After patch:
write     6470

(Read is similar.)

This also fixes a mistake in d23d4cb67c / LU-13419 where it
removed the shrink interval update entirely from the direct
i/o path.

Fixes: d23d4cb67c ("lustre: osc: Move shrink update to per-write")
WC-bug-id: https://jira.whamcloud.com/browse/LU-13419
Lustre-commit: 87c4535f7a5d239a ("LU-13799 osc: Improve osc_queue_sync_pages")
Signed-off-by: Patrick Farrell <farr0186@gmail.com>
Reviewed-on: https://review.whamcloud.com/39482
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
---
 fs/lustre/osc/osc_cache.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/lustre/osc/osc_cache.c b/fs/lustre/osc/osc_cache.c
index 50f6477..69cf9ba 100644
--- a/fs/lustre/osc/osc_cache.c
+++ b/fs/lustre/osc/osc_cache.c
@@ -2715,8 +2715,8 @@ int osc_queue_sync_pages(const struct lu_env *env, struct cl_io *io,
 			list_for_each_entry(oap, list, oap_pending_item) {
 				osc_consume_write_grant(cli,
 							&oap->oap_brw_page);
-				atomic_long_inc(&obd_dirty_pages);
 			}
+			atomic_long_add(page_count, &obd_dirty_pages);
 			osc_unreserve_grant_nolock(cli, grants, 0);
 			ext->oe_grants = grants;
 		} else {
@@ -2730,6 +2730,7 @@ int osc_queue_sync_pages(const struct lu_env *env, struct cl_io *io,
 			"not enough grant available, switching to sync for this i/o\n");
 		}
 		spin_unlock(&cli->cl_loi_list_lock);
+		osc_update_next_shrink(cli);
 	}
 
 	ext->oe_is_rdma_only = !!(brw_flags & OBD_BRW_RDMA_ONLY);
-- 
1.8.3.1

_______________________________________________
lustre-devel mailing list
lustre-devel@lists.lustre.org
http://lists.lustre.org/listinfo.cgi/lustre-devel-lustre.org

  parent reply	other threads:[~2021-08-02 19:51 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-02 19:50 [lustre-devel] [PATCH 00/25] Sync to OpenSFS tree as of Aug 2, 2021 James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 01/25] lustre: llite: avoid stale data reading James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 02/25] lustre: llite: No locked parallel DIO James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 03/25] lnet: discard lnet_current_net_count James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 04/25] lnet: convert kiblnd/ksocknal_thread_start to vararg James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 05/25] lnet: print device status in net show command James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 06/25] lustre: lmv: getattr_name("..") under striped directory James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 07/25] lustre: llite: revert 'simplify callback handling for async getattr' James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 08/25] lnet: Protect lpni deref in lnet_health_check James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 09/25] lustre: uapi: remove MDS_SETATTR_PORTAL and service James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 10/25] lustre: llite: Modify AIO/DIO reference counting James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 11/25] lustre: llite: Remove transient page counting James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 12/25] lustre: lov: Improve DIO submit James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 13/25] lustre: llite: Adjust dio refcounting James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 14/25] lustre: clio: Skip prep for transients James Simmons
2021-08-02 19:50 ` James Simmons [this message]
2021-08-02 19:50 ` [lustre-devel] [PATCH 16/25] lustre: llite: avoid project quota overflow James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 17/25] lnet: check memdup_user_nul using IS_ERR James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 18/25] lustre: osc: Remove lockless truncate James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 19/25] lustre: osc: Remove client contention support James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 20/25] lustre: osc: osc: Do not flush on lockless cancel James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 21/26] lustre: pcc: add LCM_FL_PCC_RDONLY layout flag James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 21/25] lustre: update version to 2.14.53 James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 22/25] lustre: mdc: set default LMV on ROOT James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 22/26] lustre: update version to 2.14.53 James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 23/25] lustre: llite: enable filesystem-wide default LMV James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 23/26] lustre: mdc: set default LMV on ROOT James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 24/25] lnet: o2iblnd: clear fatal error on successful failover James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 24/26] lustre: llite: enable filesystem-wide default LMV James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 25/25] lnet: add "stats reset" to lnetctl James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 25/26] lnet: o2iblnd: clear fatal error on successful failover James Simmons
2021-08-02 19:50 ` [lustre-devel] [PATCH 26/26] lnet: add "stats reset" to lnetctl James Simmons

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1627933851-7603-16-git-send-email-jsimmons@infradead.org \
    --to=jsimmons@infradead.org \
    --cc=adilger@whamcloud.com \
    --cc=farr0186@gmail.com \
    --cc=green@whamcloud.com \
    --cc=lustre-devel@lists.lustre.org \
    --cc=neilb@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.