All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kuogee Hsieh <khsieh@codeaurora.org>
To: robdclark@gmail.com, sean@poorly.run, swboyd@chromium.org
Cc: Kuogee Hsieh <khsieh@codeaurora.org>,
	abhinavk@codeaurora.org, aravindh@codeaurora.org,
	airlied@linux.ie, daniel@ffwll.ch, linux-arm-msm@vger.kernel.org,
	dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 4/6] drm/msm/dp: replug event is converted into an unplug followed by an plug events
Date: Wed, 11 Aug 2021 09:30:05 -0700	[thread overview]
Message-ID: <1628699407-28358-5-git-send-email-khsieh@codeaurora.org> (raw)
In-Reply-To: <1628699407-28358-1-git-send-email-khsieh@codeaurora.org>

Remove special handling of replug interrupt and instead treat replug event
as a sequential unplug followed by a plugin event. This is needed to meet
the requirements of DP Link Layer CTS test case 4.2.1.3.

Changes in V2:
-- add fixes statement

Changes in V3:
-- delete EV_HPD_REPLUG_INT

Fixes: f21c8a276c2d ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly")

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 78c5301..aa96272 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -55,7 +55,6 @@ enum {
 	EV_HPD_INIT_SETUP,
 	EV_HPD_PLUG_INT,
 	EV_IRQ_HPD_INT,
-	EV_HPD_REPLUG_INT,
 	EV_HPD_UNPLUG_INT,
 	EV_USER_NOTIFICATION,
 	EV_CONNECT_PENDING_TIMEOUT,
@@ -1146,9 +1145,6 @@ static int hpd_event_thread(void *data)
 		case EV_IRQ_HPD_INT:
 			dp_irq_hpd_handle(dp_priv, todo->data);
 			break;
-		case EV_HPD_REPLUG_INT:
-			/* do nothing */
-			break;
 		case EV_USER_NOTIFICATION:
 			dp_display_send_hpd_notification(dp_priv,
 						todo->data);
@@ -1192,10 +1188,8 @@ static irqreturn_t dp_display_irq_handler(int irq, void *dev_id)
 
 	if (hpd_isr_status & 0x0F) {
 		/* hpd related interrupts */
-		if (hpd_isr_status & DP_DP_HPD_PLUG_INT_MASK ||
-			hpd_isr_status & DP_DP_HPD_REPLUG_INT_MASK) {
+		if (hpd_isr_status & DP_DP_HPD_PLUG_INT_MASK)
 			dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
-		}
 
 		if (hpd_isr_status & DP_DP_IRQ_HPD_INT_MASK) {
 			/* stop sentinel connect pending checking */
@@ -1203,8 +1197,10 @@ static irqreturn_t dp_display_irq_handler(int irq, void *dev_id)
 			dp_add_event(dp, EV_IRQ_HPD_INT, 0, 0);
 		}
 
-		if (hpd_isr_status & DP_DP_HPD_REPLUG_INT_MASK)
-			dp_add_event(dp, EV_HPD_REPLUG_INT, 0, 0);
+		if (hpd_isr_status & DP_DP_HPD_REPLUG_INT_MASK) {
+			dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
+			dp_add_event(dp, EV_HPD_PLUG_INT, 0, 3);
+		}
 
 		if (hpd_isr_status & DP_DP_HPD_UNPLUG_INT_MASK)
 			dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2021-08-11 16:32 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-11 16:30 [PATCH v4 0/6] add fixes to pass DP Link Layer compliance test cases Kuogee Hsieh
2021-08-11 16:30 ` [PATCH v4 1/6] drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run Kuogee Hsieh
2021-08-11 16:30 ` [PATCH v4 2/6] drm/msm/dp: reduce link rate if failed at link training 1 Kuogee Hsieh
2021-08-11 16:30 ` [PATCH v4 3/6] drm/msm/dp: reset aux controller after dp_aux_cmd_fifo_tx() failed Kuogee Hsieh
2021-08-11 16:30 ` Kuogee Hsieh [this message]
2021-08-11 16:30 ` [PATCH v4 5/6] drm/msm/dp: return correct edid checksum after corrupted edid checksum read Kuogee Hsieh
2021-08-11 16:30 ` [PATCH v4 6/6] drm/msm/dp: do not end dp link training until video is ready Kuogee Hsieh
2021-11-25 11:39 ` [PATCH v4 0/6] add fixes to pass DP Link Layer compliance test cases Dmitry Baryshkov
2021-11-25 11:39   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1628699407-28358-5-git-send-email-khsieh@codeaurora.org \
    --to=khsieh@codeaurora.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=aravindh@codeaurora.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.