[PATCH v2 2/3] drm/msm/dpu: fix maxlinewidth for writeback block

[Abhinav Kumar <quic_abhinavk@quicinc.com>]

Writeback block for sm8250 was using the default maxlinewidth
of 2048. But this is not right as it supports upto 4096.

This should have no effect on most resolutions as we are
still limiting upto maxlinewidth of SSPP for adding the modes.

Fix the maxlinewidth for writeback block on sm8250.

Fixes: 53324b99bd7b ("add writeback blocks to the sm8250 DPU catalog")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 400ebceb56bb..dd7537e32f88 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -1285,7 +1285,7 @@ static const struct dpu_intf_cfg qcm2290_intf[] = {
  * Writeback blocks config
  *************************************************************/
 #define WB_BLK(_name, _id, _base, _features, _clk_ctrl, \
-		__xin_id, vbif_id, _reg, _wb_done_bit) \
+		__xin_id, vbif_id, _reg, _max_linewidth, _wb_done_bit) \
 	{ \
 	.name = _name, .id = _id, \
 	.base = _base, .len = 0x2c8, \
@@ -1295,13 +1295,13 @@ static const struct dpu_intf_cfg qcm2290_intf[] = {
 	.clk_ctrl = _clk_ctrl, \
 	.xin_id = __xin_id, \
 	.vbif_idx = vbif_id, \
-	.maxlinewidth = DEFAULT_DPU_LINE_WIDTH, \
+	.maxlinewidth = _max_linewidth, \
 	.intr_wb_done = DPU_IRQ_IDX(_reg, _wb_done_bit) \
 	}
 
 static const struct dpu_wb_cfg sm8250_wb[] = {
 	WB_BLK("wb_2", WB_2, 0x65000, WB_SM8250_MASK, DPU_CLK_CTRL_WB2, 6,
-			VBIF_RT, MDP_SSPP_TOP0_INTR, 4),
+			VBIF_RT, MDP_SSPP_TOP0_INTR, 4096, 4),
 };
 
 /*************************************************************
-- 
2.7.4