From: Sven Luther <sven.luther@wanadoo.fr>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sven Luther <sven.luther@wanadoo.fr>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
linuxppc-dev list <linuxppc-dev@lists.linuxppc.org>,
Rob Baxter <robb@synergymicro.com>
Subject: Re: multiple separate pci bridges ...
Date: Tue, 6 Jan 2004 15:45:45 +0100 [thread overview]
Message-ID: <20040106144545.GA7261@iliana> (raw)
In-Reply-To: <Pine.GSO.4.58.0401061533510.5752@waterleaf.sonytel.be>
On Tue, Jan 06, 2004 at 03:40:30PM +0100, Geert Uytterhoeven wrote:
> On Tue, 6 Jan 2004, Sven Luther wrote:
> > On Tue, Jan 06, 2004 at 07:00:24PM +1100, Benjamin Herrenschmidt wrote:
> > > Type 0 is an access to the primary segment (doesn't contain a bus
> > > number), type 1 is to be forwarded to another bus segment by a P2P
> > > bridge. So for anything directly attached to the host bridge, it's a
> > > type 0 access. Anything else is type 1. Typically, if the bus number of
> > > your "target" == hose->first_busno, it's type 0, else type 1
> >
> > Yep, except we have two pci controllers, and it should be type 0 for
> > both of them.
>
> Yep, two hoses, with different hose->first_busno.
A, yes, right.
> > > They could have appeared as on-chip PCI devices on a "pseudo-bus", but
> > > we can eventually just match with the host's PCI device.
> >
> > Ok. but this can also be faked or something ? But, how can we match with
> > the host PCI device, if we are going to hide it ?
>
> Hide the memory BAR only, not the full PCI device.
Ok, will try that.
BTW, is there any reason the L2 cache is disabled by default in the
2.4.x kernels ?
Friendly,
Sven Luther
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2004-01-06 14:45 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-01 18:11 multiple separate pci bridges Sven Luther
2004-01-02 4:03 ` Benjamin Herrenschmidt
2004-01-02 7:40 ` Sven Luther
2004-01-02 7:49 ` Benjamin Herrenschmidt
2004-01-04 21:03 ` Sven Luther
2004-01-04 21:45 ` Benjamin Herrenschmidt
2004-01-04 22:06 ` Sven Luther
2004-01-05 16:40 ` Sven Luther
2004-01-05 21:28 ` Benjamin Herrenschmidt
2004-01-05 21:42 ` Sven Luther
2004-01-05 22:12 ` Benjamin Herrenschmidt
2004-01-06 7:39 ` Sven Luther
2004-01-06 8:00 ` Benjamin Herrenschmidt
2004-01-06 8:11 ` Sven Luther
2004-01-06 14:40 ` Geert Uytterhoeven
2004-01-06 14:45 ` Sven Luther [this message]
2004-01-06 15:33 ` Rob Baxter
2004-01-06 17:44 ` Sven Luther
2004-01-06 21:37 ` Benjamin Herrenschmidt
2004-01-06 22:10 ` Marcus Barrow
2004-01-06 22:17 ` Rob Baxter
2004-01-06 22:31 ` Benjamin Herrenschmidt
2004-01-07 2:35 ` Sven Luther
2004-01-07 2:36 ` Benjamin Herrenschmidt
2004-01-07 2:40 ` Sven Luther
2004-01-07 9:02 ` Michael Schmitz
2004-01-07 9:23 ` Benjamin Herrenschmidt
2004-01-07 9:56 ` Sven Luther
2004-01-07 10:27 ` Michael Schmitz
2004-01-13 9:56 ` Sven Luther
2004-01-13 10:26 ` Sven Luther
2004-01-18 12:15 ` Sven Luther
2004-01-18 13:00 ` Michel Dänzer
2004-01-18 13:14 ` Sven Luther
2004-01-19 9:12 ` Benjamin Herrenschmidt
2004-01-18 22:27 ` Sven Luther
2004-01-18 22:59 ` Benjamin Herrenschmidt
2004-01-19 9:21 ` Sven Luther
2004-01-18 23:24 ` Benjamin Herrenschmidt
2004-01-05 21:38 ` Marcus Barrow
2004-01-06 7:14 ` Sven Luther
2004-01-06 7:56 ` Benjamin Herrenschmidt
2004-01-06 8:20 ` Sven Luther
2004-01-02 18:34 ` Geert Uytterhoeven
2004-01-02 15:18 ` Rob Baxter
2004-01-02 23:56 ` Benjamin Herrenschmidt
2004-01-03 0:27 ` Rob Baxter
2004-01-03 1:12 ` Benjamin Herrenschmidt
2004-01-05 0:52 ` Rob Baxter
2004-01-05 2:13 ` Benjamin Herrenschmidt
2004-01-06 20:53 Marcus Barrow
2004-01-06 21:09 Marcus Barrow
2004-01-06 22:59 ` Benjamin Herrenschmidt
2004-01-06 23:00 ` Benjamin Herrenschmidt
2004-01-18 14:44 Sven Luther
2004-01-18 16:33 ` Michel Dänzer
2004-01-18 17:28 ` Sven Luther
2004-01-18 18:24 ` Michel Dänzer
2004-01-18 22:20 ` Sven Luther
2004-01-18 23:33 ` Michel Dänzer
2004-01-19 9:55 ` Sven Luther
2004-01-19 13:48 ` Sven Luther
2004-01-19 13:54 ` Geert Uytterhoeven
2004-01-19 14:00 ` Sven Luther
2004-01-19 14:02 ` Michel Dänzer
2004-01-19 14:16 ` Sven Luther
2004-01-19 14:31 ` Michel Dänzer
2004-01-19 9:11 ` Benjamin Herrenschmidt
2004-01-18 22:33 ` Sven Luther
2004-01-18 23:23 ` Michel Dänzer
2004-01-18 23:42 ` Benjamin Herrenschmidt
2004-01-19 0:03 ` Michel Dänzer
2004-01-19 10:08 ` Geert Uytterhoeven
2004-01-19 11:41 ` Benjamin Herrenschmidt
2004-01-19 12:03 ` Sven Luther
2004-01-19 21:35 ` Benjamin Herrenschmidt
2004-01-19 22:08 ` Sven Luther
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040106144545.GA7261@iliana \
--to=sven.luther@wanadoo.fr \
--cc=benh@kernel.crashing.org \
--cc=geert@linux-m68k.org \
--cc=linuxppc-dev@lists.linuxppc.org \
--cc=robb@synergymicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.