Hello,
Can you help me, what is It?
Victor Riquelme Durán
/var/log/messages
May 6 09:14:36 r-matriz wait_for_sysfs[2739]: either
wait_for_sysfs (udev 039) needs an update to handle the device
'/class/net/eth5.318' properly (no device symlink) or the sysfs-support of your
device's driver needs to be fixed, please report to
<linux-hotplug-devel@lists.sourceforge.net>
May 6 09:14:36 r-matriz wait_for_sysfs[2733]: either
wait_for_sysfs (udev 039) needs an update to handle the device '/class/net/eth4.343'
properly (no device symlink) or the sysfs-support of your device's driver needs
to be fixed, please report to linux-hotplug-devel@lists.sourceforge.net
[root@r-matriz log]# cat dmesg
Linux version 2.6.9-1.667
(bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat
3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000
(reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000
(reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 65472
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61376 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000
AMI ) @ 0x000ff980
ACPI: RSDT (v001 D850MV MV85010A 0x20011114 MSFT
0x00001011) @ 0x0fff0000
ACPI: FADT (v001 D850MV MV85010A 0x20011114 MSFT
0x00001011) @ 0x0fff1000
ACPI: MADT (v001 D850MV MV85010A 0x20011114 MSFT
0x00001011) @ 0x0ffe36ef
ACPI: DSDT (v001 D850MV MV85010A 0x00000004 MSFT
0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023d5000 soft=023d4000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1595.329 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6,
262144 bytes)
Inode-cache hash table entries: 32768 (order: 5,
131072 bytes)
Memory: 255176k/261888k available (2068k kernel code,
6092k reserved, 647k data, 144k init, 0k highmem)
Calibrating delay loop... 3145.72 BogoMIPS (lpj=1572864)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized,
register_security failed.
selinux_register_security: Registering secondary
module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096
bytes)
CPU: After generic identify, caps: 3febfbff 00000000
00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: After all inits, caps: 3febf3ff 00000000
00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 387k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last
bus=4
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI:
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10
*11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10
11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10
11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10
11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10
*11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10
*11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10
*11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10
11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 5
(level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9
(level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 10
(level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9
(level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11
(level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11
(level, low) -> IRQ 11
ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 9
(level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 11
(level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 11
(level, low) -> IRQ 11
ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 10
(level, low) -> IRQ 10
ACPI: PCI interrupt 0000:04:04.0[A] -> GSI 11
(level, low) -> IRQ 11
ACPI: PCI interrupt 0000:04:05.0[A] -> GSI 11
(level, low) -> IRQ 11
ACPI: PCI interrupt 0000:04:06.0[A] -> GSI 10
(level, low) -> IRQ 10
ACPI: PCI interrupt 0000:04:07.0[A] -> GSI 9
(level, low) -> IRQ 9
apm: BIOS version 1.2 Flags 0x03 (Driver version
1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1115370816.277:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6ECDA687281A73E5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
ACPI: Processor [CPU1] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i850 Chipset.
agpgart: Maximum main memory to use for agp memory:
203M
agpgart: AGP aperture is 64M @ 0xf8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports,
IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K
size 1024 blocksize
divert: not allocating divert_blk for non-ethernet
device lo
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 4
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings:
hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings:
hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD400EB-00CPF0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache,
CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 52X CD-ROM drive, 192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core
driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Logitech Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind
4681)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PBTN PCI1 NEC0 NEC1 NEC2 UAR1 UAR2 USB USB2 AC9
SMB
Freeing unused kernel memory: 144k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 280 types, 16 bools
security: 53 classes, 5494 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hda2, type ext3), uses
xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs),
uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not
configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs),
not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
SELinux: initialized (dev eventpollfs, type
eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses
task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
SELinux: initialized (dev futexfs, type futexfs),
uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses
task SIDs
SELinux: initialized (dev proc, type proc), uses
genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses
genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses
genfs_contexts
inserting floppy driver for 2.6.9-1.667
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sundance.c:v1.01+LK1.09a 10-Jul-2003 Written by
Donald Becker
http://www.scyld.com/network/sundance.html
ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 9
(level, low) -> IRQ 9
divert: allocating divert_blk for eth0
eth0: D-Link DFE-580TX 4 port Server Adapter at
0xbc00, 00:0d:88:c5:b4:14, IRQ 9.
eth0: MII PHY found at address 1, status 0x7829
advertising 01e1.
ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 11
(level, low) -> IRQ 11
divert: allocating divert_blk for eth1
eth1: D-Link DFE-580TX 4 port Server Adapter at
0xb880, 00:0d:88:c5:b4:15, IRQ 11.
eth1: MII PHY found at address 1, status 0x7829
advertising 01e1.
ACPI: PCI interrupt 0000:03:06.0[A] -> GSI 11
(level, low) -> IRQ 11
divert: allocating divert_blk for eth2
eth2: D-Link DFE-580TX 4 port Server Adapter at
0xb800, 00:0d:88:c5:b4:16, IRQ 11.
eth2: MII PHY found at address 1, status 0x7829
advertising 01e1.
ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 10
(level, low) -> IRQ 10
divert: allocating divert_blk for eth3
eth3: D-Link DFE-580TX 4 port Server Adapter at
0xb480, 00:0d:88:c5:b4:17, IRQ 10.
eth3: MII PHY found at address 1, status 0x7829
advertising 01e1.
ACPI: PCI interrupt 0000:04:04.0[A] -> GSI 11
(level, low) -> IRQ 11
divert: allocating divert_blk for eth4
eth4: D-Link DFE-580TX 4 port Server Adapter at
0xcc00, 00:0d:88:c5:b4:24, IRQ 11.
eth4: MII PHY found at address 1, status 0x7829
advertising 01e1.
ACPI: PCI interrupt 0000:04:05.0[A] -> GSI 11
(level, low) -> IRQ 11
divert: allocating divert_blk for eth5
eth5: D-Link DFE-580TX 4 port Server Adapter at
0xc880, 00:0d:88:c5:b4:25, IRQ 11.
eth5: MII PHY found at address 1, status 0x7829
advertising 01e1.
ACPI: PCI interrupt 0000:04:06.0[A] -> GSI 10
(level, low) -> IRQ 10
divert: allocating divert_blk for eth6
eth6: D-Link DFE-580TX 4 port Server Adapter at
0xc800, 00:0d:88:c5:b4:26, IRQ 10.
eth6: MII PHY found at address 1, status 0x7829
advertising 01e1.
ACPI: PCI interrupt 0000:04:07.0[A] -> GSI 9
(level, low) -> IRQ 9
divert: allocating divert_blk for eth7
eth7: D-Link DFE-580TX 4 port Server Adapter at
0xc480, 00:0d:88:c5:b4:27, IRQ 9.
eth7: MII PHY found at address 1, status 0x7829
advertising 01e1.
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11
(level, low) -> IRQ 11
divert: allocating divert_blk for eth8
e100: eth8: e100_probe: addr 0xfeaff000, irq 11, MAC
addr 00:03:47:EC:34:60
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9
(level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.5 to
64
intel8x0_measure_ac97_clock: measured 49314 usecs
intel8x0: clocking to 41136
hw_random hardware driver 1.0.0 loaded
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 5
(level, low) -> IRQ 5
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to
64
uhci_hcd 0000:00:1f.2: irq 5, io base 0000ef40
SELinux: initialized (dev usbdevfs, type usbdevfs),
uses genfs_contexts
uhci_hcd 0000:00:1f.2: new USB bus registered,
assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 10
(level, low) -> IRQ 10
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to
64
uhci_hcd 0000:00:1f.4: irq 10, io base 0000ef80
uhci_hcd 0000:00:1f.4: new USB bus registered,
assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 2-2: new full speed USB device using address 2
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
ACPI: Power Button (FF) [PWRF]
EXT3 FS on hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised:
dm@uk.sistina.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses
xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda3, type ext3), uses
xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda5, type ext3), uses
xattr
Adding 522072k swap on /dev/hda6. Priority:-1
extents:1
SELinux: initialized (dev binfmt_misc, type
binfmt_misc), uses genfs_contexts