Linux version 2.6.20-1.2932 (jcliburn@hawk.hogchain.net) (gcc version 4.1.2 20070214 (Red Hat 4.1.2-1)) #1 SMP Sat Feb 17 09:48:58 CST 2007 Command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,38400 console=tty0 debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS) BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262064) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000FA960, 0014 (r0 ACPIAM) ACPI: RSDT 3FFB0000, 0038 (r1 A M I OEMRSDT 7000611 MSFT 97) ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 7000611 MSFT 97) ACPI: DSDT 3FFB0440, 4CCB (r1 A0498 A0498000 0 INTL 20060113) ACPI: FACS 3FFBE000, 0040 ACPI: APIC 3FFB0390, 0068 (r1 A M I OEMAPIC 7000611 MSFT 97) ACPI: MCFG 3FFB0400, 003C (r1 A M I OEMMCFG 7000611 MSFT 97) ACPI: OEMB 3FFBE040, 0060 (r1 A M I AMI_OEM 7000611 MSFT 97) ACPI: SSDT 3FFB5110, 01C4 (r1 A M I POWERNOW 1 AMD 1) Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003ffb0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262064) 1 entries of 3200 used NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003ffb0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 262064 On node 0 totalpages: 261967 DMA zone: 88 pages used for memmap DMA zone: 2316 pages reserved DMA zone: 1595 pages, LIFO batch:0 DMA32 zone: 5542 pages used for memmap DMA32 zone: 252426 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e4000 Nosave address range: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 44416 bytes of per cpu data Built 1 zonelists. Total pages: 254021 Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,38400 console=tty0 debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ 1046000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1010552k/1048256k available (2447k kernel code, 37316k reserved, 1426k data, 328k init) Calibrating delay using timer specific routine.. 4001.02 BogoMIPS (lpj=2000514) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 lockdep: not fixing up alternatives. ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12498862 Detected 12.498 MHz APIC timer. lockdep: not fixing up alternatives. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3998.98 BogoMIPS (lpj=1999493) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 491 cycles) Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 1999.818 MHz processor. sizeof(vma)=176 bytes sizeof(page)=88 bytes sizeof(inode)=1008 bytes sizeof(dentry)=248 bytes sizeof(ext3inode)=1376 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=3776 bytes migration_cost=351 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:02:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs<7>Losing some ticks... checking if CPU frequency changed. 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:07: ioport range 0xc00-0xc0f has been reserved pnp: 00:07: ioport range 0xd00-0xd0f has been reserved pnp: 00:07: ioport range 0xa20-0xa2f has been reserved pnp: 00:07: ioport range 0xa30-0xa3f has been reserved pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0f: iomem range 0xc0000-0xcffff could not be reserved pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0f: iomem range 0x100000-0x3fffffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f9000000-fbdfffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: f7f00000-f7ffffff PCI: Bridge: 0000:00:03.1 IO window: disabled. MEM window: disabled. PREFETCH window: f7e00000-f7efffff PCI: Bridge: 0000:00:03.2 IO window: disabled. MEM window: fbe00000-fbefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.3 IO window: disabled. MEM window: disabled. PREFETCH window: f7d00000-f7dfffff PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: fbf00000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35 PCI: Setting latency timer of device 0000:00:03.1 to 64 ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39 PCI: Setting latency timer of device 0000:00:03.2 to 64 ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43 PCI: Setting latency timer of device 0000:00:03.3 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 65536 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3698k freed audit: initializing netlink socket (disabled) audit(1171713241.877:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 87B885CDE4968314 - key was been created 13843 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie02] PCI: Setting latency timer of device 0000:00:03.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.1:pcie00] Allocate Port Service[0000:00:03.1:pcie02] PCI: Setting latency timer of device 0000:00:03.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.2:pcie00] Allocate Port Service[0000:00:03.2:pcie02] PCI: Setting latency timer of device 0000:00:03.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.3:pcie00] Allocate Port Service[0000:00:03.3:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [P001] (supports 16 throttling states) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 328k freed Write protecting the kernel read-only data: 1043k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d480 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 23, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Basic Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-1 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 21, io mem 0xf8fffc00 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.10 loaded. sata_via 0000:00:0f.0: version 2.0 usb 2-1: USB disconnect, address 2 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 sata_via 0000:00:0f.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0x000000000001ec00 ctl 0x000000000001e882 bmdma 0x000000000001e400 irq 21 ata2: SATA max UDMA/133 cmd 0x000000000001e800 ctl 0x000000000001e482 bmdma 0x000000000001e408 irq 21 scsi0 : sata_via ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0x000000000001ec07 ATA: abnormal status 0x7F on port 0x000000000001ec07 ata1.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 ata1.00: configured for UDMA/133 scsi1 : sata_via usb 2-1: new low speed USB device using uhci_hcd and address 3 ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x000000000001e807 scsi 0:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Basic Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-1 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1171713248.186:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pata_via 0000:00:0f.1: version 0.2.1 ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14 ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15 scsi2 : pata_via ata3.00: ATAPI, max UDMA/33 ata3.00: configured for UDMA/33 scsi3 : pata_via EDAC MC: Ver: 2.0.1 Feb 17 2007 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] input: PC Speaker as /class/input/input4 parport0: Printer, HEWLETT-PACKARD DESKJET 840C ATA: abnormal status 0x8 on port 0x0000000000010177 Attansic L1 Ethernet Network Driver - version 2.0.6 Copyright(c) 2005-2006 Attansic Corporation. scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5 scsi 2:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 36 (level, low) -> IRQ 36 PCI: Setting latency timer of device 0000:04:00.0 to 64 EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 pnp: Device 00:02 does not support disabling. rtc_cmos: probe of 00:02 failed with error -16 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:08:01.0 to 64 lp0: using parport0 (interrupt-driven). lp0: console ready No dock devices found. input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. loop: loaded (max 8 devices) EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (4094 buckets, 32752 max) NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead. atl1: eth0 link is up 100 Mbps full duplex atl1: eth0 link is up 1000 Mbps full duplex eth0: no IPv6 routers present