From: Ingo Molnar <mingo@elte.hu>
To: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: mingo@redhat.com, hpa@zytor.com, linux-kernel@vger.kernel.org,
tglx@linutronix.de, linux-tip-commits@vger.kernel.org,
ego@in.ibm.com
Subject: Re: [tip:core/rcu] rcu: Add diagnostic check for a possible CPU-hotplug race
Date: Mon, 3 Aug 2009 09:04:58 +0200 [thread overview]
Message-ID: <20090803070458.GA27581@elte.hu> (raw)
In-Reply-To: <20090802221324.GP6854@linux.vnet.ibm.com>
i've attached the full serial bootlog with the warning in it. This
should address your question about what the order of initialization
is, right?
Let me know if you still would like me to run your diagnostic patch
too.
Ingo
[ 0.000000] Linux version 2.6.31-rc5-tip (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #291 SMP PREEMPT Sun Aug 2 22:49:56 CEST 2009
[ 0.000000] Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 nolapic_timer hpet=disable idle=poll highmem=512m nopat acpi=off pci=nomsi
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] using polling idle threads.
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fff0000
[ 0.000000] 0000000000 - 003fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fff0000 @ 100000-302000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fff0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
[ 0.000000] NODE_DATA [0000000000008000 - 0000000000046fff]
[ 0.000000] bootmap [0000000000047000 - 000000000004efff] pages 8
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00033f8d90] TEXT DATA BSS ==> [0001000000 - 00033f8d90]
[ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #4 [0000100000 - 0000300000] PGTABLE ==> [0000100000 - 0000300000]
[ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes.
[ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes.
[ 0.000000] found SMP MP-table at [ffff8800000f5680] f5680
[ 0.000000] mpc: f1400-f152c
[ 0.000000] [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880003800000-ffff880004dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262026
[ 0.000000] DMA zone: 88 pages used for memmap
[ 0.000000] DMA zone: 611 pages reserved
[ 0.000000] DMA zone: 3295 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5544 pages used for memmap
[ 0.000000] DMA32 zone: 252488 pages, LIFO batch:31
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] mpc: f1400-f152c
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] Bus #0 is PCI
[ 0.000000] Bus #1 is PCI
[ 0.000000] Bus #2 is PCI
[ 0.000000] Bus #3 is PCI
[ 0.000000] Bus #4 is PCI
[ 0.000000] Bus #5 is PCI
[ 0.000000] Bus #6 is ISA
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
[ 0.000000] Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages at ffff88000347c000, static data 95072 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255783
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3 nolapic_timer hpet=disable idle=poll highmem=512m nopat acpi=off pci=nomsi
[ 0.000000] debug: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 985624k/1048512k available (15196k kernel code, 408k absent, 62480k reserved, 9977k data, 868k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2010.639 MHz processor.
[ 0.000015] spurious 8259A interrupt: IRQ7.
[ 0.006744] Console: colour VGA+ 80x25
[ 0.010000] console [ttyS0] enabled, bootconsole disabled
[ 0.010000] console [ttyS0] enabled, bootconsole disabled
[ 0.010000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.010000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.010000] ... MAX_LOCK_DEPTH: 48
[ 0.010000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.010000] ... CLASSHASH_SIZE: 4096
[ 0.010000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.010000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.010000] ... CHAINHASH_SIZE: 16384
[ 0.010000] memory used by lock dependency info: 5823 kB
[ 0.010000] per task-struct memory footprint: 1920 bytes
[ 0.010000] ------------------------
[ 0.010000] | Locking API testsuite:
[ 0.010000] ----------------------------------------------------------------------------
[ 0.010000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] A-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
[ 0.010000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.010000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.010000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] recursive read-lock: | ok | |failed|
[ 0.010000] recursive read-lock #2: | ok | |failed|
[ 0.010000] mixed read-write-lock: |failed| |failed|
[ 0.010000] mixed write-read-lock: |failed| |failed|
[ 0.010000] --------------------------------------------------------------------------
[ 0.010000] hard-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.010000] soft-irqs-on + irq-safe-A/12:failed|failed| ok |
[ 0.010000] hard-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.010000] soft-irqs-on + irq-safe-A/21:failed|failed| ok |
[ 0.010000] sirq-safe-A => hirqs-on/12:failed|failed| ok |
[ 0.010000] sirq-safe-A => hirqs-on/21:failed|failed| ok |
[ 0.010000] hard-safe-A + irqs-on/12:failed|failed| ok |
[ 0.010000] soft-safe-A + irqs-on/12:failed|failed| ok |
[ 0.010000] hard-safe-A + irqs-on/21:failed|failed| ok |
[ 0.010000] soft-safe-A + irqs-on/21:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/123:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/132:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/213:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/231:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/312:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #1/321:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/123:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/132:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/213:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/231:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/312:failed|failed| ok |
[ 0.010000] hard-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.010000] soft-safe-A + unsafe-B #2/321:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/123:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/123:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/132:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/132:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/213:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/213:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/231:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/231:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/312:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/312:failed|failed| ok |
[ 0.010000] hard-irq lock-inversion/321:failed|failed| ok |
[ 0.010000] soft-irq lock-inversion/321:failed|failed| ok |
[ 0.010000] hard-irq read-recursion/123: ok |
[ 0.010000] soft-irq read-recursion/123: ok |
[ 0.010000] hard-irq read-recursion/132: ok |
[ 0.010000] soft-irq read-recursion/132: ok |
[ 0.010000] hard-irq read-recursion/213: ok |
[ 0.010000] soft-irq read-recursion/213: ok |
[ 0.010000] hard-irq read-recursion/231: ok |
[ 0.010000] soft-irq read-recursion/231: ok |
[ 0.010000] hard-irq read-recursion/312: ok |
[ 0.010000] soft-irq read-recursion/312: ok |
[ 0.010000] hard-irq read-recursion/321: ok |
[ 0.010000] soft-irq read-recursion/321: ok |
[ 0.010000] --------------------------------------------------------
[ 0.010000] 133 out of 218 testcases failed, as expected. |
[ 0.010000] ----------------------------------------------------
[ 0.010000] ODEBUG: 11 of 11 active objects replaced
[ 0.010000] ODEBUG: selftest passed
[ 0.010013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.27 BogoMIPS (lpj=20106390)
[ 0.020634] Security Framework initialized
[ 0.024730] TOMOYO Linux initialized
[ 0.028979] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.030924] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.040482] Mount-cache hash table entries: 256
[ 0.050722] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.057847] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.060006] CPU 0/0x0 -> Node 0
[ 0.063146] tseg: 0000000000
[ 0.066032] CPU: Physical Processor ID: 0
[ 0.070003] CPU: Processor Core ID: 0
[ 0.073660] mce: CPU supports 5 MCE banks
[ 0.080899] debug: unmapping init memory ffffffff8289a000..ffffffff828ac000
[ 0.088243] Setting APIC routing to flat
[ 0.090012] enabled ExtINT on CPU#0
[ 0.093548] ExtINT not setup in hardware but reported by MP table
[ 0.100094] ENABLING IO-APIC IRQs
[ 0.103408] init IO_APIC IRQs
[ 0.106371] 2-0 (apicid-pin) not connected
[ 0.110021] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
[ 0.117334] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
[ 0.120014] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1)
[ 0.127323] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:1)
[ 0.130000] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
[ 0.130000] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
[ 0.130000] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
[ 0.130000] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
[ 0.130000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.130000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.130000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.130000] ..... (found apic 0 pin 0) ...
[ 0.232854] ....... works.
[ 0.235555] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.241237] Disabling APIC timer
[ 0.250011] calling migration_init+0x0/0x7f @ 1
[ 0.254802] initcall migration_init+0x0/0x7f returned 0 after 0 usecs
[ 0.260006] calling spawn_ksoftirqd+0x0/0x7f @ 1
[ 0.264792] initcall spawn_ksoftirqd+0x0/0x7f returned 0 after 0 usecs
[ 0.270006] calling init_call_single_data+0x0/0xd5 @ 1
[ 0.275234] initcall init_call_single_data+0x0/0xd5 returned 0 after 0 usecs
[ 0.280005] calling spawn_softlockup_task+0x0/0x9b @ 1
[ 0.290126] initcall spawn_softlockup_task+0x0/0x9b returned 0 after 0 usecs
[ 0.297160] calling relay_init+0x0/0x2d @ 1
[ 0.300005] initcall relay_init+0x0/0x2d returned 0 after 0 usecs
[ 0.306096] calling tracer_alloc_buffers+0x0/0x2b6 @ 1
[ 0.310195] initcall tracer_alloc_buffers+0x0/0x2b6 returned 0 after 0 usecs
[ 0.320005] calling init_trace_printk+0x0/0x2d @ 1
[ 0.324882] initcall init_trace_printk+0x0/0x2d returned 0 after 0 usecs
[ 0.330004] calling trace_workqueue_early_init+0x0/0x164 @ 1
[ 0.335806] initcall trace_workqueue_early_init+0x0/0x164 returned 0 after 0 usecs
[ 0.350022] lockdep: fixing up alternatives.
[ 0.354423] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] masked ExtINT on CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 4020.69 BogoMIPS (lpj=20103483)
[ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.010000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.010000] CPU 1/0x1 -> Node 0
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] mce: CPU supports 5 MCE banks
[ 0.520258] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
[ 0.530009] ------------[ cut here ]------------
[ 0.530019] WARNING: at kernel/rcutree.c:1140 __rcu_process_callbacks+0x4b/0x294()
[ 0.530024] Pid: 0, comm: swapper Not tainted 2.6.31-rc5-tip #291
[ 0.530027] Call Trace:
[ 0.530029] <IRQ> [<ffffffff810becbc>] ? __rcu_process_callbacks+0x4b/0x294
[ 0.530037] [<ffffffff8107c455>] warn_slowpath_common+0x68/0xab
[ 0.530041] [<ffffffff8107c4bf>] warn_slowpath_null+0x27/0x3d
[ 0.530045] [<ffffffff810becbc>] __rcu_process_callbacks+0x4b/0x294
[ 0.530050] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 0.530055] [<ffffffff810bef43>] rcu_process_callbacks+0x3e/0x76
[ 0.530059] [<ffffffff8108312a>] __do_softirq+0x12c/0x24b
[ 0.530064] [<ffffffff8102f44c>] call_softirq+0x1c/0x28
[ 0.530068] [<ffffffff8103177a>] do_softirq+0x56/0xb3
[ 0.530073] [<ffffffff810a5442>] ? tick_handle_periodic+0x35/0x9b
[ 0.530077] [<ffffffff8108274f>] irq_exit+0x57/0x7c
[ 0.530083] [<ffffffff81047643>] smp_apic_timer_interrupt+0xa0/0xc6
[ 0.530088] [<ffffffff8102ee33>] apic_timer_interrupt+0x13/0x20
[ 0.530090] <EOI> [<ffffffff810374ca>] ? need_resched+0x53/0x54
[ 0.530098] [<ffffffff810375ac>] ? poll_idle+0x3c/0x5f
[ 0.530102] [<ffffffff8102d376>] ? enter_idle+0x38/0x4e
[ 0.530106] [<ffffffff8102d436>] ? cpu_idle+0xaa/0x110
[ 0.530112] [<ffffffff8290a187>] ? start_secondary+0x1c7/0x1e2
[ 0.530119] ---[ end trace 93d72a36b9146f22 ]---
[ 0.540003] stepping 02
[ 0.542554] Brought up 2 CPUs
[ 0.550004] Total of 2 processors activated (8041.97 BogoMIPS).
[ 0.556465] CPU0 attaching sched-domain:
[ 0.560007] domain 0: span 0-1 level CPU
[ 0.564032] groups: 0 1
[ 0.570008] CPU1 attaching sched-domain:
[ 0.573934] domain 0: span 0-1 level CPU
[ 0.577958] groups: 1 0
[ 0.581105] device: 'platform': device_add
[ 0.585775] bus: 'platform': registered
[ 0.589626] Registering sysdev class 'cpu'
[ 0.590213] Registering sysdev class 'memory'
[ 0.594788] Registering sys device of class 'memory'
[ 0.600010] Registering sys device 'memory0'
[ 0.604507] Registering sys device of class 'memory'
[ 0.610008] Registering sys device 'memory1'
[ 0.614511] Registering sys device of class 'memory'
[ 0.620009] Registering sys device 'memory2'
[ 0.624488] Registering sys device of class 'memory'
[ 0.630008] Registering sys device 'memory3'
[ 0.634469] Registering sys device of class 'memory'
[ 0.640009] Registering sys device 'memory4'
[ 0.644520] Registering sys device of class 'memory'
[ 0.650008] Registering sys device 'memory5'
[ 0.654481] Registering sys device of class 'memory'
[ 0.660009] Registering sys device 'memory6'
[ 0.664499] Registering sys device of class 'memory'
[ 0.669460] Registering sys device 'memory7'
[ 0.680699] calling init_cpufreq_transition_notifier_list+0x0/0x42 @ 1
[ 0.687308] initcall init_cpufreq_transition_notifier_list+0x0/0x42 returned 0 after 0 usecs
[ 0.690006] calling net_ns_init+0x0/0x11b @ 1
[ 0.700016] initcall net_ns_init+0x0/0x11b returned 0 after 0 usecs
[ 0.706277] calling cpufreq_tsc+0x0/0x28 @ 1
[ 0.710004] initcall cpufreq_tsc+0x0/0x28 returned 0 after 0 usecs
[ 0.716175] calling print_banner+0x0/0xe @ 1
[ 0.720035] Booting paravirtualized kernel on bare hardware
[ 0.725605] initcall print_banner+0x0/0xe returned 0 after 0 usecs
[ 0.730004] calling init_smp_flush+0x0/0x64 @ 1
[ 0.734617] initcall init_smp_flush+0x0/0x64 returned 0 after 0 usecs
[ 0.740004] calling sysctl_init+0x0/0x59 @ 1
[ 0.744570] initcall sysctl_init+0x0/0x59 returned 0 after 0 usecs
[ 0.750003] calling ksysfs_init+0x0/0xe4 @ 1
[ 0.754637] initcall ksysfs_init+0x0/0xe4 returned 0 after 0 usecs
[ 0.760020] calling async_init+0x0/0x69 @ 1
[ 0.770004] initcall async_init+0x0/0x69 returned 0 after 0 usecs
[ 0.776088] calling init_jiffies_clocksource+0x0/0x39 @ 1
[ 0.780008] initcall init_jiffies_clocksource+0x0/0x39 returned 0 after 0 usecs
[ 0.787309] calling init_hw_breakpoint+0x0/0x39 @ 1
[ 0.790006] initcall init_hw_breakpoint+0x0/0x39 returned 0 after 0 usecs
[ 0.800027] calling filelock_init+0x0/0x55 @ 1
[ 0.804637] initcall filelock_init+0x0/0x55 returned 0 after 0 usecs
[ 0.810004] calling init_misc_binfmt+0x0/0x67 @ 1
[ 0.814800] initcall init_misc_binfmt+0x0/0x67 returned 0 after 0 usecs
[ 0.820004] calling init_script_binfmt+0x0/0x3b @ 1
[ 0.824963] initcall init_script_binfmt+0x0/0x3b returned 0 after 0 usecs
[ 0.830004] calling init_elf_binfmt+0x0/0x3b @ 1
[ 0.834704] initcall init_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
[ 0.840019] calling init_compat_elf_binfmt+0x0/0x3b @ 1
[ 0.850004] initcall init_compat_elf_binfmt+0x0/0x3b returned 0 after 0 usecs
[ 0.857128] calling debugfs_init+0x0/0x80 @ 1
[ 0.860011] initcall debugfs_init+0x0/0x80 returned 0 after 0 usecs
[ 0.866269] calling securityfs_init+0x0/0x77 @ 1
[ 0.870011] initcall securityfs_init+0x0/0x77 returned 0 after 0 usecs
[ 0.880019] calling random32_init+0x0/0xff @ 1
[ 0.884547] initcall random32_init+0x0/0xff returned 0 after 0 usecs
[ 0.890003] calling cpufreq_core_init+0x0/0xaa @ 1
[ 0.894878] initcall cpufreq_core_init+0x0/0xaa returned 0 after 0 usecs
[ 0.900005] calling virtio_init+0x0/0x52 @ 1
[ 0.904567] bus: 'virtio': registered
[ 0.910005] initcall virtio_init+0x0/0x52 returned 0 after 9765 usecs
[ 0.916434] calling sock_init+0x0/0x80 @ 1
[ 0.920220] initcall sock_init+0x0/0x80 returned 0 after 0 usecs
[ 0.926216] calling netpoll_init+0x0/0x69 @ 1
[ 0.930004] initcall netpoll_init+0x0/0x69 returned 0 after 0 usecs
[ 0.936268] calling netlink_proto_init+0x0/0x169 @ 1
[ 0.940054] NET: Registered protocol family 16
[ 0.944557] initcall netlink_proto_init+0x0/0x169 returned 0 after 0 usecs
[ 0.950027] calling bdi_class_init+0x0/0x68 @ 1
[ 0.954642] device class 'bdi': registering
[ 0.960271] initcall bdi_class_init+0x0/0x68 returned 0 after 9765 usecs
[ 0.970005] calling kobject_uevent_init+0x0/0x7b @ 1
[ 0.975070] initcall kobject_uevent_init+0x0/0x7b returned 0 after 0 usecs
[ 0.980004] calling gpiolib_sysfs_init+0x0/0xbc @ 1
[ 0.984961] device class 'gpio': registering
[ 0.990252] initcall gpiolib_sysfs_init+0x0/0xbc returned 0 after 9765 usecs
[ 0.997293] calling pcibus_class_init+0x0/0x40 @ 1
[ 1.000004] device class 'pci_bus': registering
[ 1.004788] initcall pcibus_class_init+0x0/0x40 returned 0 after 0 usecs
[ 1.010004] calling pci_driver_init+0x0/0x39 @ 1
[ 1.020227] bus: 'pci': registered
[ 1.023630] initcall pci_driver_init+0x0/0x39 returned 0 after 0 usecs
[ 1.030005] calling lcd_class_init+0x0/0x74 @ 1
[ 1.034623] device class 'lcd': registering
[ 1.039024] initcall lcd_class_init+0x0/0x74 returned 0 after 0 usecs
[ 1.040004] calling backlight_class_init+0x0/0x84 @ 1
[ 1.050003] device class 'backlight': registering
[ 1.054907] initcall backlight_class_init+0x0/0x84 returned 0 after 0 usecs
[ 1.060005] calling tty_class_init+0x0/0x58 @ 1
[ 1.064617] device class 'tty': registering
[ 1.070242] initcall tty_class_init+0x0/0x58 returned 0 after 9765 usecs
[ 1.076936] calling vtconsole_class_init+0x0/0xe8 @ 1
[ 1.080005] device class 'vtconsole': registering
[ 1.084930] device: 'vtcon0': device_add
[ 1.090293] initcall vtconsole_class_init+0x0/0xe8 returned 0 after 9765 usecs
[ 1.100005] calling register_node_type+0x0/0xa4 @ 1
[ 1.104960] Registering sysdev class 'node'
[ 1.109376] initcall register_node_type+0x0/0xa4 returned 0 after 0 usecs
[ 1.110005] calling spi_init+0x0/0xd4 @ 1
[ 1.120238] bus: 'spi': registered
[ 1.123635] device class 'spi_master': registering
[ 1.128652] initcall spi_init+0x0/0xd4 returned 0 after 0 usecs
[ 1.130006] calling i2c_init+0x0/0x8c @ 1
[ 1.134334] bus: 'i2c': registered
[ 1.140003] device class 'i2c-adapter': registering
[ 1.145077] bus: 'i2c': add driver dummy
[ 1.150253] initcall i2c_init+0x0/0x8c returned 0 after 19531 usecs
[ 1.156512] calling amd_postcore_init+0x0/0xa3 @ 1
[ 1.160008] node 0 link 0: io port [1000, fffff]
[ 1.164624] TOM: 0000000040000000 aka 1024M
[ 1.170003] node 0 link 0: mmio [e0000000, efffffff]
[ 1.174979] node 0 link 0: mmio [feb00000, fec0ffff]
[ 1.180200] node 0 link 0: mmio [a0000, bffff]
[ 1.184659] node 0 link 0: mmio [40000000, fed3ffff]
[ 1.190215] bus: [00,ff] on node 0 link 0
[ 1.194224] bus: 00 index 0 io port: [0, ffff]
[ 1.200003] bus: 00 index 1 mmio: [40000000, fcffffffff]
[ 1.205308] bus: 00 index 2 mmio: [feb00000, fec0ffff]
[ 1.210003] bus: 00 index 3 mmio: [a0000, bffff]
[ 1.214618] initcall amd_postcore_init+0x0/0xa3 returned 0 after 48828 usecs
[ 1.220003] calling arch_kdebugfs_init+0x0/0x2a7 @ 1
[ 1.225086] initcall arch_kdebugfs_init+0x0/0x2a7 returned 0 after 0 usecs
[ 1.230018] calling mtrr_if_init+0x0/0x8a @ 1
[ 1.234470] initcall mtrr_if_init+0x0/0x8a returned 0 after 0 usecs
[ 1.240004] calling dma_bus_init+0x0/0x66 @ 1
[ 1.244442] device class 'dma': registering
[ 1.250225] initcall dma_bus_init+0x0/0x66 returned 0 after 9765 usecs
[ 1.260004] calling dma_channel_table_init+0x0/0x137 @ 1
[ 1.265409] initcall dma_channel_table_init+0x0/0x137 returned 0 after 0 usecs
[ 1.270004] calling dca_init+0x0/0x45 @ 1
[ 1.274093] dca service started, version 1.8
[ 1.280017] device class 'dca': registering
[ 1.284444] initcall dca_init+0x0/0x45 returned 0 after 9765 usecs
[ 1.290005] calling pci_arch_init+0x0/0x67 @ 1
[ 1.294841] PCI: Using configuration type 1 for base access
[ 1.300005] initcall pci_arch_init+0x0/0x67 returned 0 after 9765 usecs
[ 1.306609] calling topology_init+0x0/0xe0 @ 1
[ 1.310003] Registering sys device of class 'node'
[ 1.314793] Registering sys device 'node0'
[ 1.320256] Registering sys device of class 'cpu'
[ 1.324956] Registering sys device 'cpu0'
[ 1.330286] Registering sys device of class 'cpu'
[ 1.334992] Registering sys device 'cpu1'
[ 1.340225] initcall topology_init+0x0/0xe0 returned 0 after 29296 usecs
[ 1.346919] calling mtrr_init_finialize+0x0/0x64 @ 1
[ 1.350006] initcall mtrr_init_finialize+0x0/0x64 returned 0 after 0 usecs
[ 1.356874] calling param_sysfs_init+0x0/0x37b @ 1
[ 1.579904] initcall param_sysfs_init+0x0/0x37b returned 0 after 205078 usecs
[ 1.581017] calling init_slow_work+0x0/0x5f @ 1
[ 1.590005] initcall init_slow_work+0x0/0x5f returned 0 after 0 usecs
[ 1.596434] calling default_bdi_init+0x0/0x5e @ 1
[ 1.600020] device: 'default': device_add
[ 1.604377] initcall default_bdi_init+0x0/0x5e returned 0 after 0 usecs
[ 1.611124] calling init_bio+0x0/0x100 @ 1
[ 1.621337] bio: create slab <bio-0> at 0
[ 1.625444] initcall init_bio+0x0/0x100 returned 0 after 0 usecs
[ 1.630925] calling fsnotify_init+0x0/0x39 @ 1
[ 1.635459] initcall fsnotify_init+0x0/0x39 returned 0 after 0 usecs
[ 1.640005] calling fsnotify_notification_init+0x0/0x129 @ 1
[ 1.645853] initcall fsnotify_notification_init+0x0/0x129 returned 0 after 0 usecs
[ 1.650026] calling cryptomgr_init+0x0/0x39 @ 1
[ 1.660005] initcall cryptomgr_init+0x0/0x39 returned 0 after 0 usecs
[ 1.666434] calling blk_settings_init+0x0/0x51 @ 1
[ 1.670004] initcall blk_settings_init+0x0/0x51 returned 0 after 0 usecs
[ 1.676694] calling blk_ioc_init+0x0/0x51 @ 1
[ 1.680043] initcall blk_ioc_init+0x0/0x51 returned 0 after 0 usecs
[ 1.690019] calling blk_softirq_init+0x0/0x8f @ 1
[ 1.694805] initcall blk_softirq_init+0x0/0x8f returned 0 after 0 usecs
[ 1.700004] calling genhd_device_init+0x0/0x8c @ 1
[ 1.704875] device class 'block': registering
[ 1.710394] initcall genhd_device_init+0x0/0x8c returned 0 after 9765 usecs
[ 1.717344] calling gpiolib_debugfs_init+0x0/0x4b @ 1
[ 1.720122] initcall gpiolib_debugfs_init+0x0/0x4b returned 0 after 0 usecs
[ 1.730004] calling max7301_init+0x0/0x39 @ 1
[ 1.734445] bus: 'spi': add driver max7301
[ 1.738825] initcall max7301_init+0x0/0x39 returned 0 after 0 usecs
[ 1.740261] calling max732x_init+0x0/0x3b @ 1
[ 1.750054] bus: 'i2c': add driver max732x
[ 1.754367] initcall max732x_init+0x0/0x3b returned 0 after 0 usecs
[ 1.760045] calling mcp23s08_init+0x0/0x39 @ 1
[ 1.764571] bus: 'spi': add driver mcp23s08
[ 1.770071] initcall mcp23s08_init+0x0/0x39 returned 0 after 9765 usecs
[ 1.776678] calling pcf857x_init+0x0/0x3b @ 1
[ 1.780003] bus: 'i2c': add driver pcf857x
[ 1.784308] initcall pcf857x_init+0x0/0x3b returned 0 after 0 usecs
[ 1.790005] calling gpio_twl4030_init+0x0/0x39 @ 1
[ 1.794874] bus: 'platform': add driver twl4030_gpio
[ 1.800215] initcall gpio_twl4030_init+0x0/0x39 returned 0 after 9765 usecs
[ 1.807173] calling pci_slot_init+0x0/0x73 @ 1
[ 1.810014] initcall pci_slot_init+0x0/0x73 returned 0 after 0 usecs
[ 1.816364] calling misc_init+0x0/0xd6 @ 1
[ 1.820026] device class 'misc': registering
[ 1.824517] initcall misc_init+0x0/0xd6 returned 0 after 0 usecs
[ 1.830006] calling cn_init+0x0/0x11a @ 1
[ 1.834149] initcall cn_init+0x0/0x11a returned 0 after 0 usecs
[ 1.840004] calling tifm_init+0x0/0xab @ 1
[ 1.844520] bus: 'tifm': registered
[ 1.850003] device class 'tifm_adapter': registering
[ 1.855186] initcall tifm_init+0x0/0xab returned 0 after 9765 usecs
[ 1.860004] calling tps_init+0x0/0xa4 @ 1
[ 1.864094] tps65010: version 2 May 2005
[ 1.870003] bus: 'i2c': add driver tps65010
[ 1.874414] bus: 'i2c': remove driver tps65010
[ 1.880261] driver: 'tps65010': driver_release
[ 1.900010] bus: 'i2c': add driver tps65010
[ 1.904449] bus: 'i2c': remove driver tps65010
[ 1.909082] driver: 'tps65010': driver_release
[ 1.930062] bus: 'i2c': add driver tps65010
[ 1.934472] bus: 'i2c': remove driver tps65010
[ 1.939102] driver: 'tps65010': driver_release
[ 1.940034] tps65010: no chip?
[ 1.943090] initcall tps_init+0x0/0xa4 returned -19 after 78125 usecs
[ 1.950004] calling twl4030_init+0x0/0x3b @ 1
[ 1.954441] bus: 'i2c': add driver twl4030
[ 1.960222] initcall twl4030_init+0x0/0x3b returned 0 after 9765 usecs
[ 1.966739] calling da903x_init+0x0/0x3b @ 1
[ 1.970080] bus: 'i2c': add driver da903x
[ 1.974311] initcall da903x_init+0x0/0x3b returned 0 after 0 usecs
[ 1.980055] calling pcf50633_init+0x0/0x3b @ 1
[ 1.984579] bus: 'i2c': add driver pcf50633
[ 1.990239] initcall pcf50633_init+0x0/0x3b returned 0 after 9765 usecs
[ 1.996841] calling init_scsi+0x0/0xb7 @ 1
[ 2.000790] device class 'scsi_host': registering
[ 2.005987] bus: 'scsi': registered
[ 2.010026] device class 'scsi_device': registering
[ 2.015146] SCSI subsystem initialized
[ 2.020023] initcall init_scsi+0x0/0xb7 returned 0 after 19531 usecs
[ 2.026366] calling ata_init+0x0/0x3b3 @ 1
[ 2.030339] libata version 3.00 loaded.
[ 2.034175] initcall ata_init+0x0/0x3b3 returned 0 after 0 usecs
[ 2.040007] calling phy_init+0x0/0x57 @ 1
[ 2.044096] device class 'mdio_bus': registering
[ 2.050458] bus: 'mdio_bus': registered
[ 2.054295] bus: 'mdio_bus': add driver Generic PHY
[ 2.060234] initcall phy_init+0x0/0x57 returned 0 after 19531 usecs
[ 2.066495] calling usb_init+0x0/0x185 @ 1
[ 2.070256] bus: 'usb': registered
[ 2.073668] bus: 'usb': add driver usbfs
[ 2.077830] usbcore: registered new interface driver usbfs
[ 2.080012] bus: 'usb': add driver hub
[ 2.083986] usbcore: registered new interface driver hub
[ 2.090089] bus: 'usb': add driver usb
[ 2.094047] usbcore: registered new device driver usb
[ 2.100005] initcall usb_init+0x0/0x185 returned 0 after 29296 usecs
[ 2.106355] calling serio_init+0x0/0xb2 @ 1
[ 2.110238] bus: 'serio': registered
[ 2.113894] initcall serio_init+0x0/0xb2 returned 0 after 0 usecs
[ 2.120005] calling gameport_init+0x0/0xb2 @ 1
[ 2.124806] bus: 'gameport': registered
[ 2.130088] initcall gameport_init+0x0/0xb2 returned 0 after 9765 usecs
[ 2.136693] calling input_init+0x0/0x15d @ 1
[ 2.140004] device class 'input': registering
[ 2.144608] initcall input_init+0x0/0x15d returned 0 after 0 usecs
[ 2.150005] calling pps_init+0x0/0xd7 @ 1
[ 2.154096] device class 'pps': registering
[ 2.160205] LinuxPPS API ver. 1 registered
[ 2.164295] Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.170006] initcall pps_init+0x0/0xd7 returned 0 after 19531 usecs
[ 2.180003] calling power_supply_class_init+0x0/0x5f @ 1
[ 2.185396] device class 'power_supply': registering
[ 2.190207] initcall power_supply_class_init+0x0/0x5f returned 0 after 9765 usecs
[ 2.197681] calling thermal_init+0x0/0x7e @ 1
[ 2.200008] device class 'thermal': registering
[ 2.204802] initcall thermal_init+0x0/0x7e returned 0 after 0 usecs
[ 2.210004] calling mmc_init+0x0/0x9c @ 1
[ 2.214432] bus: 'mmc': registered
[ 2.220004] device class 'mmc_host': registering
[ 2.225103] bus: 'sdio': registered
[ 2.230005] initcall mmc_init+0x0/0x9c returned 0 after 19531 usecs
[ 2.236260] calling leds_init+0x0/0x67 @ 1
[ 2.240004] device class 'leds': registering
[ 2.244485] initcall leds_init+0x0/0x67 returned 0 after 0 usecs
[ 2.250006] calling ac97_bus_init+0x0/0x39 @ 1
[ 2.254789] bus: 'ac97': registered
[ 2.258279] initcall ac97_bus_init+0x0/0x39 returned 0 after 0 usecs
[ 2.260005] calling pci_subsys_init+0x0/0x136 @ 1
[ 2.270002] PCI: Probing PCI hardware
[ 2.273683] PCI: Probing PCI hardware (bus 00)
[ 2.278136] device: 'pci0000:00': device_add
[ 2.280020] device: '0000:00': device_add
[ 2.284259] PCI: Scanning bus 0000:00
[ 2.290058] pci 0000:00:00.0: found [10de:005e] class 000580 header type 00
[ 2.297060] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.300054] pci 0000:00:01.0: found [10de:0050] class 000601 header type 00
[ 2.310030] pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xec
[ 2.316634] HPET not enabled in BIOS. You might try hpet=force boot option
[ 2.320004] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.330045] pci 0000:00:01.1: found [10de:0052] class 000c05 header type 00
[ 2.337007] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f]
[ 2.340015] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f]
[ 2.350006] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f]
[ 2.355749] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x1dd
[ 2.360013] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 2.365837] pci 0000:00:01.1: PME# disabled
[ 2.370048] pci 0000:00:02.0: found [10de:005a] class 000c03 header type 00
[ 2.380014] pci 0000:00:02.0: reg 10 32bit mmio: [0xda102000-0xda102fff]
[ 2.386731] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.390012] pci 0000:00:02.0: supports D1 D2
[ 2.394276] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.400004] pci 0000:00:02.0: PME# disabled
[ 2.404204] pci 0000:00:02.1: found [10de:005b] class 000c03 header type 00
[ 2.410033] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff]
[ 2.420023] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1dd
[ 2.426727] pci 0000:00:02.1: supports D1 D2
[ 2.430003] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.440004] pci 0000:00:02.1: PME# disabled
[ 2.444216] pci 0000:00:04.0: found [10de:0059] class 000401 header type 00
[ 2.450029] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
[ 2.455770] pci 0000:00:04.0: reg 14 io port: [0xd800-0xd8ff]
[ 2.460009] pci 0000:00:04.0: reg 18 32bit mmio: [0xda101000-0xda101fff]
[ 2.466719] pci 0000:00:04.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.470012] pci 0000:00:04.0: supports D1 D2
[ 2.480025] pci 0000:00:06.0: found [10de:0053] class 000101 header type 00
[ 2.487000] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 2.490028] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.500033] pci 0000:00:09.0: found [10de:005c] class 000604 header type 01
[ 2.507001] pci 0000:00:09.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.510023] pci 0000:00:0a.0: found [10de:0057] class 000680 header type 00
[ 2.520014] pci 0000:00:0a.0: reg 10 32bit mmio: [0xda100000-0xda100fff]
[ 2.526706] pci 0000:00:0a.0: reg 14 io port: [0xd000-0xd007]
[ 2.530036] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.536738] pci 0000:00:0a.0: supports D1 D2
[ 2.540003] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.550004] pci 0000:00:0a.0: PME# disabled
[ 2.554250] pci 0000:00:0b.0: found [10de:005d] class 000604 header type 01
[ 2.560021] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.566728] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.570019] pci 0000:00:0b.0: PME# disabled
[ 2.574228] pci 0000:00:0c.0: found [10de:005d] class 000604 header type 01
[ 2.580020] pci 0000:00:0c.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.590020] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.596626] pci 0000:00:0c.0: PME# disabled
[ 2.600030] pci 0000:00:0d.0: found [10de:005d] class 000604 header type 01
[ 2.610035] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.616744] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.620004] pci 0000:00:0d.0: PME# disabled
[ 2.624209] pci 0000:00:0e.0: found [10de:005d] class 000604 header type 01
[ 2.630020] pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.640030] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.646633] pci 0000:00:0e.0: PME# disabled
[ 2.650056] pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
[ 2.660024] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.666744] pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
[ 2.670024] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1dd
[ 2.680019] pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
[ 2.686991] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1dd
[ 2.690034] pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
[ 2.700023] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1dd
[ 2.706740] PCI: Fixups for bus 0000:00
[ 2.710005] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 0
[ 2.716964] PCI: Scanning bus 0000:05
[ 2.720035] pci 0000:05:07.0: found [10ec:8139] class 000200 header type 00
[ 2.727005] pci 0000:05:07.0: reg 10 io port: [0xc000-0xc0ff]
[ 2.730022] pci 0000:05:07.0: reg 14 32bit mmio: [0xda000000-0xda0000ff]
[ 2.740027] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.746731] pci 0000:05:07.0: supports D1 D2
[ 2.750003] pci 0000:05:07.0: PME# supported from D1 D2 D3hot
[ 2.755743] pci 0000:05:07.0: PME# disabled
[ 2.760047] PCI: Fixups for bus 0000:05
[ 2.763880] pci 0000:00:09.0: transparent bridge
[ 2.770019] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
[ 2.775759] pci 0000:00:09.0: bridge 32bit mmio: [0xda000000-0xda0fffff]
[ 2.780004] PCI: Bus scan for 0000:05 returning with max=05
[ 2.785571] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 0
[ 2.790012] PCI: Scanning bus 0000:04
[ 2.800056] PCI: Fixups for bus 0000:04
[ 2.803895] PCI: Bus scan for 0000:04 returning with max=04
[ 2.809468] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 0
[ 2.810027] PCI: Scanning bus 0000:03
[ 2.820056] PCI: Fixups for bus 0000:03
[ 2.823893] PCI: Bus scan for 0000:03 returning with max=03
[ 2.829457] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 0
[ 2.830012] PCI: Scanning bus 0000:02
[ 2.840056] PCI: Fixups for bus 0000:02
[ 2.843896] PCI: Bus scan for 0000:02 returning with max=02
[ 2.849468] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 0
[ 2.850027] PCI: Scanning bus 0000:01
[ 2.860022] pci 0000:01:00.0: found [1002:5b60] class 000300 header type 00
[ 2.866977] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x47
[ 2.870009] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 2.876705] pci 0000:01:00.0: reg 14 io port: [0xb000-0xb0ff]
[ 2.880007] pci 0000:01:00.0: reg 18 32bit mmio: [0xd9000000-0xd900ffff]
[ 2.890033] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 2.896387] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1dd
[ 2.900021] pci 0000:01:00.0: supports D1 D2
[ 2.904313] pci 0000:01:00.1: found [1002:5b70] class 000380 header type 00
[ 2.910009] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x47
[ 2.920008] pci 0000:01:00.1: reg 10 32bit mmio: [0xd9010000-0xd901ffff]
[ 2.926729] pci 0000:01:00.1: calling quirk_resource_alignment+0x0/0x1dd
[ 2.930034] pci 0000:01:00.1: supports D1 D2
[ 2.940070] PCI: Fixups for bus 0000:01
[ 2.943908] pci 0000:00:0e.0: bridge io port: [0xb000-0xbfff]
[ 2.950004] pci 0000:00:0e.0: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
[ 2.956696] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
[ 2.960003] PCI: Bus scan for 0000:01 returning with max=01
[ 2.965569] pci 0000:00:09.0: scanning behind bridge, config 050500, pass 1
[ 2.970021] pci 0000:00:0b.0: scanning behind bridge, config 040400, pass 1
[ 2.980007] pci 0000:00:0c.0: scanning behind bridge, config 030300, pass 1
[ 2.990005] pci 0000:00:0d.0: scanning behind bridge, config 020200, pass 1
[ 2.996957] pci 0000:00:0e.0: scanning behind bridge, config 010100, pass 1
[ 3.000005] PCI: Bus scan for 0000:00 returning with max=05
[ 3.005568] device: '0000:00:00.0': device_add
[ 3.010025] bus: 'pci': add device 0000:00:00.0
[ 3.014867] device: '0000:00:01.0': device_add
[ 3.020011] bus: 'pci': add device 0000:00:01.0
[ 3.024813] device: '0000:00:01.1': device_add
[ 3.030020] bus: 'pci': add device 0000:00:01.1
[ 3.034810] device: '0000:00:02.0': device_add
[ 3.040011] bus: 'pci': add device 0000:00:02.0
[ 3.044828] device: '0000:00:02.1': device_add
[ 3.050010] bus: 'pci': add device 0000:00:02.1
[ 3.054798] device: '0000:00:04.0': device_add
[ 3.060011] bus: 'pci': add device 0000:00:04.0
[ 3.064853] device: '0000:00:06.0': device_add
[ 3.069298] bus: 'pci': add device 0000:00:06.0
[ 3.070257] device: '0000:00:09.0': device_add
[ 3.074710] bus: 'pci': add device 0000:00:09.0
[ 3.080277] device: '0000:00:0a.0': device_add
[ 3.084723] bus: 'pci': add device 0000:00:0a.0
[ 3.090266] device: '0000:00:0b.0': device_add
[ 3.094716] bus: 'pci': add device 0000:00:0b.0
[ 3.100286] device: '0000:00:0c.0': device_add
[ 3.104736] bus: 'pci': add device 0000:00:0c.0
[ 3.110279] device: '0000:00:0d.0': device_add
[ 3.114725] bus: 'pci': add device 0000:00:0d.0
[ 3.120326] device: '0000:00:0e.0': device_add
[ 3.124770] bus: 'pci': add device 0000:00:0e.0
[ 3.130269] device: '0000:00:18.0': device_add
[ 3.134717] bus: 'pci': add device 0000:00:18.0
[ 3.139532] device: '0000:00:18.1': device_add
[ 3.140011] bus: 'pci': add device 0000:00:18.1
[ 3.144818] device: '0000:00:18.2': device_add
[ 3.150011] bus: 'pci': add device 0000:00:18.2
[ 3.154801] device: '0000:00:18.3': device_add
[ 3.160011] bus: 'pci': add device 0000:00:18.3
[ 3.164820] device: '0000:05:07.0': device_add
[ 3.170010] bus: 'pci': add device 0000:05:07.0
[ 3.174803] device: '0000:05': device_add
[ 3.180306] device: '0000:04': device_add
[ 3.184542] device: '0000:03': device_add
[ 3.188810] device: '0000:02': device_add
[ 3.190235] device: '0000:01:00.0': device_add
[ 3.194692] bus: 'pci': add device 0000:01:00.0
[ 3.200279] device: '0000:01:00.1': device_add
[ 3.204725] bus: 'pci': add device 0000:01:00.1
[ 3.210268] device: '0000:01': device_add
[ 3.214784] pci 0000:00:00.0: default IRQ router [10de:005e]
[ 3.220374] initcall pci_subsys_init+0x0/0x136 returned 0 after 927734 usecs
[ 3.227411] calling proto_init+0x0/0x39 @ 1
[ 3.230016] initcall proto_init+0x0/0x39 returned 0 after 0 usecs
[ 3.240007] calling net_dev_init+0x0/0x1c2 @ 1
[ 3.244575] device class 'net': registering
[ 3.249002] device: 'lo': device_add
[ 3.250442] initcall net_dev_init+0x0/0x1c2 returned 0 after 9765 usecs
[ 3.257049] calling neigh_init+0x0/0x98 @ 1
[ 3.260006] initcall neigh_init+0x0/0x98 returned 0 after 0 usecs
[ 3.270003] calling fib_rules_init+0x0/0xcc @ 1
[ 3.274619] initcall fib_rules_init+0x0/0xcc returned 0 after 0 usecs
[ 3.280007] calling genl_init+0x0/0x100 @ 1
[ 3.300047] initcall genl_init+0x0/0x100 returned 0 after 19531 usecs
[ 3.306481] calling cipso_v4_init+0x0/0xae @ 1
[ 3.310024] initcall cipso_v4_init+0x0/0xae returned 0 after 0 usecs
[ 3.316373] calling wanrouter_init+0x0/0x79 @ 1
[ 3.320003] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[ 3.327322] initcall wanrouter_init+0x0/0x79 returned 0 after 0 usecs
[ 3.330004] calling irda_init+0x0/0xcb @ 1
[ 3.334180] irda_init()
[ 3.340099] NET: Registered protocol family 23
[ 3.344686] initcall irda_init+0x0/0xcb returned 0 after 9765 usecs
[ 3.350004] calling bt_init+0x0/0x81 @ 1
[ 3.354007] Bluetooth: Core ver 2.15
[ 3.360101] device class 'bluetooth': registering
[ 3.365007] NET: Registered protocol family 31
[ 3.370003] Bluetooth: HCI device and connection manager initialized
[ 3.376364] Bluetooth: HCI socket layer initialized
[ 3.380005] initcall bt_init+0x0/0x81 returned 0 after 29296 usecs
[ 3.386173] calling wireless_nlevent_init+0x0/0x69 @ 1
[ 3.390004] initcall wireless_nlevent_init+0x0/0x69 returned 0 after 0 usecs
[ 3.400005] calling cfg80211_init+0x0/0x9f @ 1
[ 3.404527] device class 'ieee80211': registering
[ 3.460063] Registering platform device 'regulatory.0'. Parent at platform
[ 3.466925] device: 'regulatory.0': device_add
[ 3.470011] bus: 'platform': add device regulatory.0
[ 3.475183] cfg80211: Using static regulatory domain info
[ 3.480004] cfg80211: Regulatory domain: US
[ 3.484181] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.490003] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 3.500005] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.506781] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.510003] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.520025] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.526807] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 3.530045] cfg80211: Calling CRDA for country: US
[ 3.535050] initcall cfg80211_init+0x0/0x9f returned 0 after 126953 usecs
[ 3.540005] calling ieee80211_init+0x0/0x45 @ 1
[ 3.550016] initcall ieee80211_init+0x0/0x45 returned 0 after 0 usecs
[ 3.556453] calling netlbl_init+0x0/0xa8 @ 1
[ 3.560002] NetLabel: Initializing
[ 3.563402] NetLabel: domain hash size = 128
[ 3.567759] NetLabel: protocols = UNLABELED CIPSOv4
[ 3.570201] NetLabel: unlabeled traffic allowed by default
[ 3.575768] initcall netlbl_init+0x0/0xa8 returned 0 after 9765 usecs
[ 3.580027] calling rfkill_init+0x0/0xb1 @ 1
[ 3.590002] device class 'rfkill': registering
[ 3.594660] device: 'rfkill': device_add
[ 3.598834] initcall rfkill_init+0x0/0xb1 returned 0 after 0 usecs
[ 3.600005] calling sysctl_init+0x0/0x6f @ 1
[ 3.610006] initcall sysctl_init+0x0/0x6f returned 0 after 0 usecs
[ 3.616176] calling pci_iommu_init+0x0/0x4a @ 1
[ 3.679259] DMA-API: preallocated 32768 debug entries
[ 3.680026] DMA-API: debugging enabled by kernel config
[ 3.685252] initcall pci_iommu_init+0x0/0x4a returned 0 after 58593 usecs
[ 3.690005] calling print_all_ICs+0x0/0x5a1 @ 1
[ 3.700002]
[ 3.700003] printing PIC contents
[ 3.704807] ... PIC IMR: fffa
[ 3.707864] ... PIC IRR: 0001
[ 3.710002] ... PIC ISR: 0001
[ 3.713058] ... PIC ELCR: 0828
[ 3.716116] printing local APIC contents on CPU#0/0:
[ 3.720000] ... APIC ID: 00000000 (0)
[ 3.720000] ... APIC VERSION: 00040010
[ 3.720000] ... APIC TASKPRI: 00000000 (00)
[ 3.720000] ... APIC ARBPRI: 000000e0 (e0)
[ 3.720000] ... APIC PROCPRI: 00000000
[ 3.720000] ... APIC LDR: 01000000
[ 3.720000] ... APIC DFR: ffffffff
[ 3.720000] ... APIC SPIV: 000001ff
[ 3.720000] ... APIC ISR field:
[ 3.720000] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.720000] ... APIC TMR field:
[ 3.720000] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.720000] ... APIC IRR field:
[ 3.720000] 0000000000000000000000000000000000000000000000000000000000008000
[ 3.720000] ... APIC ESR: 00000000
[ 3.720000] ... APIC ICR: 000008ef
[ 3.720000] ... APIC ICR2: 02000000
[ 3.720000] ... APIC LVTT: 00010000
[ 3.720000] ... APIC LVTPC: 00010000
[ 3.720000] ... APIC LVT0: 00010700
[ 3.720000] ... APIC LVT1: 00000400
[ 3.720000] ... APIC LVTERR: 000000fe
[ 3.720000] ... APIC TMICT: 00000000
[ 3.720000] ... APIC TMCCT: 00000000
[ 3.720000] ... APIC TDCR: 00000000
[ 3.720000]
[ 3.719992] printing local APIC contents on CPU#1/1:
[ 3.719992] ... APIC ID: 01000000 (1)
[ 3.720000] ... APIC VERSION: 00040010
[ 3.720000] ... APIC TASKPRI: 00000000 (00)
[ 3.720000] ... APIC ARBPRI: 00000030 (30)
[ 3.720000] ... APIC PROCPRI: 00000000
[ 3.720000] ... APIC LDR: 02000000
[ 3.720000] ... APIC DFR: ffffffff
[ 3.720000] ... APIC SPIV: 000001ff
[ 3.720000] ... APIC ISR field:
[ 3.720000] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.720000] ... APIC TMR field:
[ 3.720000] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.720000] ... APIC IRR field:
[ 3.720000] 0000000000010000000000000000000000000000000000000000000000000000
[ 3.720000] ... APIC ESR: 00000000
[ 3.720000] ... APIC ICR: 000008ef
[ 3.720000] ... APIC ICR2: 01000000
[ 3.720000] ... APIC LVTT: 00010000
[ 3.720000] ... APIC LVTPC: 00010000
[ 3.720000] ... APIC LVT0: 00010700
[ 3.720000] ... APIC LVT1: 00010400
[ 3.720000] ... APIC LVTERR: 000000fe
[ 3.720000] ... APIC TMICT: 00000000
[ 3.720000] ... APIC TMCCT: 00000000
[ 3.720000] ... APIC TDCR: 00000000
[ 3.720000]
[ 3.730000] number of MP IRQ sources: 17.
[ 3.730003] number of IO-APIC #2 registers: 24.
[ 3.734528] testing the IO APIC.......................
[ 3.740005]
[ 3.741497] IO APIC #2......
[ 3.744374] .... register #00: 00000000
[ 3.750002] ....... : physical APIC id: 00
[ 3.754355] ....... : Delivery Type: 0
[ 3.760024] ....... : LTS : 0
[ 3.764026] .... register #01: 00170011
[ 3.767854] ....... : max redirection entries: 0017
[ 3.770002] ....... : PRQ implemented: 0
[ 3.774268] ....... : IO APIC version: 0011
[ 3.780002] .... register #02: 00000000
[ 3.783836] ....... : arbitration: 00
[ 3.780005] Clocksource tsc unstable (delta = 208562563 ns)
[ 3.790002] .... IRQ redirection table:
[ 3.793836] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
[ 3.800019] 00 003 0 0 0 0 0 1 1 30
[ 3.810004] 01 003 0 0 0 0 0 1 1 31
[ 3.815239] 02 000 1 0 0 0 0 0 0 00
[ 3.820004] 03 003 1 1 0 1 0 1 1 33
[ 3.825250] 04 003 0 0 0 0 0 1 1 34
[ 3.830004] 05 003 1 1 0 1 0 1 1 35
[ 3.835239] 06 003 0 0 0 0 0 1 1 36
[ 3.840019] 07 003 1 0 0 0 0 1 1 37
[ 3.845265] 08 003 0 0 0 0 0 1 1 38
[ 3.850004] 09 003 0 0 0 0 0 1 1 39
[ 3.855250] 0a 003 0 0 0 0 0 1 1 3A
[ 3.863230] 0b 003 1 1 0 1 0 1 1 3B
[ 3.868470] 0c 003 0 0 0 0 0 1 1 3C
[ 3.873232] 0d 003 0 0 0 0 0 1 1 3D
[ 3.878469] 0e 003 0 0 0 0 0 1 1 3E
[ 3.883249] 0f 003 0 0 0 0 0 1 1 3F
[ 3.888498] 10 000 1 0 0 0 0 0 0 00
[ 3.893230] 11 000 1 0 0 0 0 0 0 00
[ 3.900004] 12 000 1 0 0 0 0 0 0 00
[ 3.905250] 13 000 1 0 0 0 0 0 0 00
[ 3.910004] 14 000 1 0 0 0 0 0 0 00
[ 3.915239] 15 000 1 0 0 0 0 0 0 00
[ 3.920019] 16 000 1 0 0 0 0 0 0 00
[ 3.925267] 17 000 1 0 0 0 0 0 0 00
[ 3.930002] IRQ to pin mappings:
[ 3.933228] IRQ0 -> 0:0
[ 3.935704] IRQ1 -> 0:1
[ 3.938183] IRQ3 -> 0:3
[ 3.940735] IRQ4 -> 0:4
[ 3.943211] IRQ5 -> 0:5
[ 3.945689] IRQ6 -> 0:6
[ 3.948166] IRQ7 -> 0:7
[ 3.950735] IRQ8 -> 0:8
[ 3.953211] IRQ9 -> 0:9
[ 3.955687] IRQ10 -> 0:10
[ 3.958338] IRQ11 -> 0:11
[ 3.960837] IRQ12 -> 0:12
[ 3.963488] IRQ13 -> 0:13
[ 3.966139] IRQ14 -> 0:14
[ 3.970198] IRQ15 -> 0:15
[ 3.972853] .................................... done.
[ 3.977986] initcall print_all_ICs+0x0/0x5a1 returned 0 after 263671 usecs
[ 3.980004] calling hpet_late_init+0x0/0x91 @ 1
[ 3.984619] initcall hpet_late_init+0x0/0x91 returned -19 after 0 usecs
[ 3.990004] calling clocksource_done_booting+0x0/0x37 @ 1
[ 4.000019] initcall clocksource_done_booting+0x0/0x37 returned 0 after 0 usecs
[ 4.007318] calling ftrace_init_debugfs+0x0/0x1ad @ 1
[ 4.010093] initcall ftrace_init_debugfs+0x0/0x1ad returned 0 after 0 usecs
[ 4.020006] calling rb_init_debugfs+0x0/0x56 @ 1
[ 4.024709] initcall rb_init_debugfs+0x0/0x56 returned 0 after 0 usecs
[ 4.030003] calling tracer_init_debugfs+0x0/0x32e @ 1
[ 4.035550] initcall tracer_init_debugfs+0x0/0x32e returned 0 after 0 usecs
[ 4.040020] calling init_trace_printk_function_export+0x0/0x56 @ 1
[ 4.050011] initcall init_trace_printk_function_export+0x0/0x56 returned 0 after 0 usecs
[ 4.058089] calling stat_workqueue_init+0x0/0x54 @ 1
[ 4.060013] initcall stat_workqueue_init+0x0/0x54 returned 0 after 0 usecs
[ 4.070003] calling event_trace_init+0x0/0x49c @ 1
[ 4.089466] initcall event_trace_init+0x0/0x49c returned 0 after 9765 usecs
[ 4.090012] calling ksym_tracer_stat_init+0x0/0x54 @ 1
[ 4.100016] initcall ksym_tracer_stat_init+0x0/0x54 returned 0 after 0 usecs
[ 4.107057] calling init_pipe_fs+0x0/0x72 @ 1
[ 4.110092] initcall init_pipe_fs+0x0/0x72 returned 0 after 0 usecs
[ 4.116348] calling eventpoll_init+0x0/0x102 @ 1
[ 4.120159] initcall eventpoll_init+0x0/0x102 returned 0 after 0 usecs
[ 4.130004] calling anon_inode_init+0x0/0x15c @ 1
[ 4.134855] initcall anon_inode_init+0x0/0x15c returned 0 after 0 usecs
[ 4.140005] calling fscache_init+0x0/0xd1 @ 1
[ 4.144450] Slow work thread pool: Starting up
[ 4.150229] Slow work thread pool: Ready
[ 4.154219] FS-Cache: Loaded
[ 4.157102] initcall fscache_init+0x0/0xd1 returned 0 after 9765 usecs
[ 4.160023] calling tomoyo_initerface_init+0x0/0x181 @ 1
[ 4.170131] initcall tomoyo_initerface_init+0x0/0x181 returned 0 after 0 usecs
[ 4.177345] calling blk_scsi_ioctl_init+0x0/0x2ad @ 1
[ 4.180005] initcall blk_scsi_ioctl_init+0x0/0x2ad returned 0 after 0 usecs
[ 4.186961] calling chr_dev_init+0x0/0xca @ 1
[ 4.190018] device class 'mem': registering
[ 4.194441] device: 'mem': device_add
[ 4.200283] device: 'kmem': device_add
[ 4.204248] device: 'null': device_add
[ 4.210252] device: 'port': device_add
[ 4.214222] device: 'zero': device_add
[ 4.218226] device: 'full': device_add
[ 4.220239] device: 'random': device_add
[ 4.224421] device: 'urandom': device_add
[ 4.230221] device: 'kmsg': device_add
[ 4.234229] initcall chr_dev_init+0x0/0xca returned 0 after 39062 usecs
[ 4.240005] calling firmware_class_init+0x0/0x9f @ 1
[ 4.245048] device class 'firmware': registering
[ 4.250216] initcall firmware_class_init+0x0/0x9f returned 0 after 9765 usecs
[ 4.257345] calling ieee1394_init+0x0/0x289 @ 1
[ 4.260412] bus: 'ieee1394': registered
[ 4.264248] device class 'ieee1394_host': registering
[ 4.270211] device class 'ieee1394_protocol': registering
[ 4.275845] device class 'ieee1394_node': registering
[ 4.280263] device class 'ieee1394': registering
[ 4.285076] bus: 'ieee1394': add driver nodemgr
[ 4.290217] initcall ieee1394_init+0x0/0x289 returned 0 after 29296 usecs
[ 4.300005] calling cpufreq_gov_performance_init+0x0/0x39 @ 1
[ 4.305838] initcall cpufreq_gov_performance_init+0x0/0x39 returned 0 after 0 usecs
[ 4.310004] calling cpufreq_gov_dbs_init+0x0/0x8e @ 1
[ 4.315349] initcall cpufreq_gov_dbs_init+0x0/0x8e returned 0 after 0 usecs
[ 4.320005] calling ssb_modinit+0x0/0x9b @ 1
[ 4.330253] bus: 'ssb': registered
[ 4.333666] initcall ssb_modinit+0x0/0x9b returned 0 after 0 usecs
[ 4.340006] calling pcibios_assign_resources+0x0/0x9a @ 1
[ 4.345624] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
[ 4.350004] pci 0000:00:09.0: IO window: 0xc000-0xcfff
[ 4.355310] pci 0000:00:09.0: MEM window: 0xda000000-0xda0fffff
[ 4.360004] pci 0000:00:09.0: PREFETCH window: disabled
[ 4.365397] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[ 4.370002] pci 0000:00:0b.0: IO window: disabled
[ 4.374876] pci 0000:00:0b.0: MEM window: disabled
[ 4.380026] pci 0000:00:0b.0: PREFETCH window: disabled
[ 4.385421] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 4.390002] pci 0000:00:0c.0: IO window: disabled
[ 4.400004] pci 0000:00:0c.0: MEM window: disabled
[ 4.404961] pci 0000:00:0c.0: PREFETCH window: disabled
[ 4.410004] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
[ 4.415912] pci 0000:00:0d.0: IO window: disabled
[ 4.420019] pci 0000:00:0d.0: MEM window: disabled
[ 4.424979] pci 0000:00:0d.0: PREFETCH window: disabled
[ 4.430010] pci 0000:01:00.0: BAR 6: got res [0xd8000000-0xd801ffff] bus [0xd8000000-0xd801ffff] flags 0x27200
[ 4.440006] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
[ 4.445922] pci 0000:00:0e.0: IO window: 0xb000-0xbfff
[ 4.450005] pci 0000:00:0e.0: MEM window: 0xd8000000-0xd9ffffff
[ 4.456088] pci 0000:00:0e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 4.460027] pci 0000:00:09.0: setting latency timer to 64
[ 4.470008] pci 0000:00:0b.0: setting latency timer to 64
[ 4.475407] pci 0000:00:0c.0: setting latency timer to 64
[ 4.480007] pci 0000:00:0d.0: setting latency timer to 64
[ 4.485406] pci 0000:00:0e.0: setting latency timer to 64
[ 4.490005] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 4.495482] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 4.500018] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 4.510003] pci_bus 0000:05: resource 1 mem: [0xda000000-0xda0fffff]
[ 4.516348] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 4.520003] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 4.530004] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 4.535653] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd9ffffff]
[ 4.540021] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 4.546711] initcall pcibios_assign_resources+0x0/0x9a returned 0 after 195312 usecs
[ 4.550004] calling sysctl_core_init+0x0/0x5f @ 1
[ 4.560056] initcall sysctl_core_init+0x0/0x5f returned 0 after 0 usecs
[ 4.566659] calling inet_init+0x0/0x231 @ 1
[ 4.570263] NET: Registered protocol family 2
[ 4.575033] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 4.582295] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 4.592850] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 4.603425] TCP: Hash tables configured (established 131072 bind 65536)
[ 4.610046] TCP reno registered
[ 4.613592] initcall inet_init+0x0/0x231 returned 0 after 39062 usecs
[ 4.620026] calling af_unix_init+0x0/0x7b @ 1
[ 4.624506] NET: Registered protocol family 1
[ 4.630033] initcall af_unix_init+0x0/0x7b returned 0 after 9765 usecs
[ 4.636550] calling populate_rootfs+0x0/0x131 @ 1
[ 4.640583] initcall populate_rootfs+0x0/0x131 returned 0 after 0 usecs
[ 4.650005] calling svm_init+0x0/0x40 @ 1
[ 4.654363] has_svm: svm not available
[ 4.658113] kvm: no hardware support
[ 4.660022] initcall svm_init+0x0/0x40 returned -95 after 9765 usecs
[ 4.666364] initcall svm_init+0x0/0x40 returned with error code -95
[ 4.670004] calling i8259A_init_sysfs+0x0/0x49 @ 1
[ 4.680003] Registering sysdev class 'i8259'
[ 4.684550] Registering sys device of class 'i8259'
[ 4.690025] Registering sys device 'i82590'
[ 4.694441] initcall i8259A_init_sysfs+0x0/0x49 returned 0 after 9765 usecs
[ 4.700010] calling vsyscall_init+0x0/0x60 @ 1
[ 4.704560] initcall vsyscall_init+0x0/0x60 returned 0 after 0 usecs
[ 4.710004] calling sbf_init+0x0/0x118 @ 1
[ 4.714183] initcall sbf_init+0x0/0x118 returned 0 after 0 usecs
[ 4.720004] calling i8237A_init_sysfs+0x0/0x49 @ 1
[ 4.724876] Registering sysdev class 'i8237'
[ 4.730209] Registering sys device of class 'i8237'
[ 4.735087] Registering sys device 'i82370'
[ 4.740251] initcall i8237A_init_sysfs+0x0/0x49 returned 0 after 19531 usecs
[ 4.747291] calling add_rtc_cmos+0x0/0x68 @ 1
[ 4.750008] Registering platform device 'rtc_cmos'. Parent at platform
[ 4.756531] device: 'rtc_cmos': device_add
[ 4.760023] bus: 'platform': add device rtc_cmos
[ 4.764853] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 4.770005] initcall add_rtc_cmos+0x0/0x68 returned 0 after 19531 usecs
[ 4.780005] calling cache_sysfs_init+0x0/0x323 @ 1
[ 4.786815] initcall cache_sysfs_init+0x0/0x323 returned 0 after 0 usecs
[ 4.790005] calling cpu_debug_init+0x0/0x2de @ 1
[ 4.802659] cpu0(2) debug files 137
[ 4.810500] cpu1(2) debug files 137
[ 4.813997] initcall cpu_debug_init+0x0/0x2de returned 0 after 9765 usecs
[ 4.820004] calling mce_init_device+0x0/0x2ed @ 1
[ 4.824794] Registering sysdev class 'machinecheck'
[ 4.830276] Registering sys device of class 'machinecheck'
[ 4.835763] Registering sys device 'machinecheck0'
[ 4.840257] Registering sys device of class 'machinecheck'
[ 4.845736] Registering sys device 'machinecheck1'
[ 4.850292] device: 'mcelog': device_add
[ 4.854442] initcall mce_init_device+0x0/0x2ed returned 0 after 29296 usecs
[ 4.860005] calling threshold_init_device+0x0/0xc0 @ 1
[ 4.865221] initcall threshold_init_device+0x0/0xc0 returned 0 after 0 usecs
[ 4.870005] calling inject_init+0x0/0x4b @ 1
[ 4.874356] Machine check injector initialized
[ 4.880004] initcall inject_init+0x0/0x4b returned 0 after 9765 usecs
[ 4.890003] calling msr_init+0x0/0x15c @ 1
[ 4.894192] device class 'msr': registering
[ 4.898590] device: 'msr0': device_add
[ 4.900369] device: 'msr1': device_add
[ 4.904340] initcall msr_init+0x0/0x15c returned 0 after 9765 usecs
[ 4.910005] calling ioapic_init_sysfs+0x0/0xd2 @ 1
[ 4.914875] Registering sysdev class 'ioapic'
[ 4.920224] Registering sys device of class 'ioapic'
[ 4.925192] Registering sys device 'ioapic0'
[ 4.930264] initcall ioapic_init_sysfs+0x0/0xd2 returned 0 after 19531 usecs
[ 4.937300] calling add_pcspkr+0x0/0x4f @ 1
[ 4.940008] Registering platform device 'pcspkr'. Parent at platform
[ 4.950004] device: 'pcspkr': device_add
[ 4.953930] bus: 'platform': add device pcspkr
[ 4.958586] initcall add_pcspkr+0x0/0x4f returned 0 after 9765 usecs
[ 4.960006] calling start_periodic_check_for_corruption+0x0/0x61 @ 1
[ 4.970003] Scanning for low memory corruption every 60 seconds
[ 4.975919] initcall start_periodic_check_for_corruption+0x0/0x61 returned 0 after 0 usecs
[ 4.980005] calling start_pageattr_test+0x0/0x6c @ 1
[ 4.990099] initcall start_pageattr_test+0x0/0x6c returned 0 after 0 usecs
[ 4.996963] calling pt_dump_init+0x0/0x57 @ 1
[ 5.000039] initcall pt_dump_init+0x0/0x57 returned 0 after 0 usecs
[ 5.006296] calling crypto_fpu_module_init+0x0/0x39 @ 1
[ 5.010041] initcall crypto_fpu_module_init+0x0/0x39 returned 0 after 0 usecs
[ 5.020004] calling aes_init+0x0/0x39 @ 1
[ 5.024340] initcall aes_init+0x0/0x39 returned 0 after 0 usecs
[ 5.030005] calling init+0x0/0x39 @ 1
[ 5.034148] initcall init+0x0/0x39 returned 0 after 0 usecs
[ 5.040004] calling init+0x0/0x39 @ 1
[ 5.043852] initcall init+0x0/0x39 returned 0 after 0 usecs
[ 5.050029] calling aesni_init+0x0/0x166 @ 1
[ 5.054379] Intel AES-NI instructions are not detected.
[ 5.059603] initcall aesni_init+0x0/0x166 returned -19 after 0 usecs
[ 5.060008] calling crc32c_intel_mod_init+0x0/0x47 @ 1
[ 5.070004] initcall crc32c_intel_mod_init+0x0/0x47 returned -19 after 0 usecs
[ 5.077214] calling init_vdso_vars+0x0/0x245 @ 1
[ 5.080025] initcall init_vdso_vars+0x0/0x245 returned 0 after 0 usecs
[ 5.086546] calling ia32_binfmt_init+0x0/0x3b @ 1
[ 5.090049] initcall ia32_binfmt_init+0x0/0x3b returned 0 after 0 usecs
[ 5.100004] calling sysenter_setup+0x0/0x304 @ 1
[ 5.104711] initcall sysenter_setup+0x0/0x304 returned 0 after 0 usecs
[ 5.110004] calling init_aout_binfmt+0x0/0x3b @ 1
[ 5.114791] initcall init_aout_binfmt+0x0/0x3b returned 0 after 0 usecs
[ 5.120004] calling init_sched_debug_procfs+0x0/0x53 @ 1
[ 5.125409] initcall init_sched_debug_procfs+0x0/0x53 returned 0 after 0 usecs
[ 5.130019] calling proc_schedstat_init+0x0/0x49 @ 1
[ 5.140012] initcall proc_schedstat_init+0x0/0x49 returned 0 after 0 usecs
[ 5.146877] calling proc_execdomains_init+0x0/0x49 @ 1
[ 5.150012] initcall proc_execdomains_init+0x0/0x49 returned 0 after 0 usecs
[ 5.160004] calling ioresources_init+0x0/0x63 @ 1
[ 5.164804] initcall ioresources_init+0x0/0x63 returned 0 after 0 usecs
[ 5.170019] calling uid_cache_init+0x0/0xb4 @ 1
[ 5.174691] initcall uid_cache_init+0x0/0xb4 returned 0 after 0 usecs
[ 5.180004] calling init_posix_timers+0x0/0x103 @ 1
[ 5.185004] initcall init_posix_timers+0x0/0x103 returned 0 after 0 usecs
[ 5.190003] calling init_posix_cpu_timers+0x0/0xd6 @ 1
[ 5.200004] initcall init_posix_cpu_timers+0x0/0xd6 returned 0 after 0 usecs
[ 5.207040] calling nsproxy_cache_init+0x0/0x54 @ 1
[ 5.210059] initcall nsproxy_cache_init+0x0/0x54 returned 0 after 0 usecs
[ 5.216842] calling create_proc_profile+0x0/0x2a0 @ 1
[ 5.220004] initcall create_proc_profile+0x0/0x2a0 returned 0 after 0 usecs
[ 5.230003] calling timekeeping_init_device+0x0/0x49 @ 1
[ 5.235395] Registering sysdev class 'timekeeping'
[ 5.240237] Registering sys device of class 'timekeeping'
[ 5.245633] Registering sys device 'timekeeping0'
[ 5.250281] initcall timekeeping_init_device+0x0/0x49 returned 0 after 19531 usecs
[ 5.257836] calling init_clocksource_sysfs+0x0/0x77 @ 1
[ 5.260003] Registering sysdev class 'clocksource'
[ 5.270153] Registering sys device of class 'clocksource'
[ 5.275549] Registering sys device 'clocksource0'
[ 5.280229] initcall init_clocksource_sysfs+0x0/0x77 returned 0 after 19531 usecs
[ 5.287699] calling init_timer_list_procfs+0x0/0x53 @ 1
[ 5.290041] initcall init_timer_list_procfs+0x0/0x53 returned 0 after 0 usecs
[ 5.300003] calling lockdep_proc_init+0x0/0x69 @ 1
[ 5.304900] initcall lockdep_proc_init+0x0/0x69 returned 0 after 0 usecs
[ 5.310003] calling futex_init+0x0/0xac @ 1
[ 5.314289] initcall futex_init+0x0/0xac returned 0 after 0 usecs
[ 5.320006] calling proc_dma_init+0x0/0x49 @ 1
[ 5.324545] initcall proc_dma_init+0x0/0x49 returned 0 after 0 usecs
[ 5.330019] calling kallsyms_init+0x0/0x4c @ 1
[ 5.334554] initcall kallsyms_init+0x0/0x4c returned 0 after 0 usecs
[ 5.340003] calling crash_save_vmcoreinfo_init+0x0/0x492 @ 1
[ 5.350032] initcall crash_save_vmcoreinfo_init+0x0/0x492 returned 0 after 0 usecs
[ 5.357593] calling crash_notes_memory_init+0x0/0x5f @ 1
[ 5.360009] initcall crash_notes_memory_init+0x0/0x5f returned 0 after 0 usecs
[ 5.370020] calling backtrace_regression_test+0x0/0x11f @ 1
[ 5.375671] ====[ backtrace testing ]===========
[ 5.380002] Testing a backtrace from process context.
[ 5.385046] The following trace is a kernel self test and not a bug!
[ 5.390004] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 5.396866] Call Trace:
[ 5.400006] [<ffffffff810b3619>] ? backtrace_regression_test+0x0/0x11f
[ 5.406608] [<ffffffff810b3663>] backtrace_regression_test+0x4a/0x11f
[ 5.410020] [<ffffffff810a3721>] ? jiffies_read+0xd/0x3c
[ 5.415414] [<ffffffff810a1f2a>] ? ktime_get+0x77/0xea
[ 5.420004] [<ffffffff810b3619>] ? backtrace_regression_test+0x0/0x11f
[ 5.430006] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 5.435658] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 5.440006] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 5.446091] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 5.450020] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 5.460004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 5.465742] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 5.470006] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 5.475484] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 5.480004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 5.485395] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 5.490019] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 5.500004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 5.505916] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 5.510005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 5.515397] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 5.520005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 5.525395] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 5.530017] Testing a backtrace from irq context.
[ 5.534717] The following trace is a kernel self test and not a bug!
[ 5.540011] Pid: 4, comm: ksoftirqd/0 Tainted: G W 2.6.31-rc5-tip #291
[ 5.550001] Call Trace:
[ 5.552449] <IRQ> [<ffffffff810b35f7>] backtrace_test_irq_callback+0x21/0x43
[ 5.560004] [<ffffffff810818dd>] tasklet_action+0x91/0xff
[ 5.565484] [<ffffffff8102f44c>] ? call_softirq+0x1c/0x28
[ 5.570004] [<ffffffff8108312a>] __do_softirq+0x12c/0x24b
[ 5.575482] [<ffffffff810827ac>] ? ksoftirqd+0x0/0x1c9
[ 5.580003] [<ffffffff8102f44c>] call_softirq+0x1c/0x28
[ 5.585307] <EOI> [<ffffffff8103177a>] do_softirq+0x56/0xb3
[ 5.590003] [<ffffffff81082857>] ksoftirqd+0xab/0x1c9
[ 5.595135] [<ffffffff81096e4e>] kthread+0x9c/0xa4
[ 5.600003] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 5.604962] [<ffffffff81096db2>] ? kthread+0x0/0xa4
[ 5.610003] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 5.615282] Testing a saved backtrace.
[ 5.620019] The following trace is a kernel self test and not a bug!
[ 5.626367] [<ffffffff8103bcb7>] save_stack_trace+0x3e/0x73
[ 5.634268] [<ffffffff810b3701>] backtrace_regression_test+0xe8/0x11f
[ 5.640002] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 5.645679] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 5.650002] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 5.654980] [<ffffffffffffffff>] 0xffffffffffffffff
[ 5.660017] ====[ end of backtrace testing ]====
[ 5.664634] initcall backtrace_regression_test+0x0/0x11f returned 0 after 283203 usecs
[ 5.670003] calling hung_task_init+0x0/0x79 @ 1
[ 5.674698] initcall hung_task_init+0x0/0x79 returned 0 after 0 usecs
[ 5.680021] calling rcu_torture_init+0x0/0x6ef @ 1
[ 5.690024] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1
[ 5.701021] initcall rcu_torture_init+0x0/0x6ef returned 0 after 9765 usecs
[ 5.710007] calling utsname_sysctl_init+0x0/0x3b @ 1
[ 5.715072] sysctl table check failed: /kernel/ostype .1.1 No proc_handler
[ 5.723317] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 5.730002] Call Trace:
[ 5.732452] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 5.737416] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 5.740004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 5.750028] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 5.756547] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 5.760004] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[ 5.766002] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 5.770004] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 5.780004] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[ 5.785916] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 5.790020] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 5.795586] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 5.800005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 5.810004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 5.815742] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 5.820005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 5.826004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 5.830019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 5.835759] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 5.840004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 5.850004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 5.855917] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 5.860005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 5.865311] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 5.870021] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 5.874981] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 5.880004] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 5.885141] sysctl table check failed: /kernel/osrelease .1.2 No proc_handler
[ 5.893577] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 5.900002] Call Trace:
[ 5.902450] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 5.910019] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 5.916019] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 5.920005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 5.926522] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 5.930004] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[ 5.940005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 5.946089] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 5.950019] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[ 5.955933] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 5.960005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 5.970004] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 5.976089] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 5.980004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 5.985741] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 5.990019] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 6.000004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 6.005482] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.010004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 6.015395] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 6.020004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 6.025916] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 6.030020] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 6.040005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 6.045395] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 6.050008] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 6.055405] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 6.060009] sysctl table check failed: /kernel/version .1.4 No proc_handler
[ 6.067066] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 6.070017] Call Trace:
[ 6.072469] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 6.080004] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 6.086002] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 6.090005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 6.100005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 6.106434] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[ 6.110020] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 6.116107] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 6.120004] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[ 6.130006] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 6.135657] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 6.140005] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 6.146089] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 6.150019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.160004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.165743] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 6.170004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 6.175481] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.180004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 6.185396] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 6.190019] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 6.200004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 6.205916] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 6.210005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 6.215397] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 6.220005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 6.225395] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 6.230024] sysctl table check failed: /kernel/hostname .1.7 No proc_handler
[ 6.237169] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 6.240002] Call Trace:
[ 6.242452] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 6.250004] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 6.260004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 6.266003] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 6.270019] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 6.276453] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[ 6.280005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 6.290005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 6.296089] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[ 6.300004] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 6.305656] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 6.310019] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 6.320005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 6.325830] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.330004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.335743] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 6.340004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 6.345481] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.350019] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 6.360004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 6.365740] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 6.370004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 6.375918] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 6.380005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 6.385396] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 6.390021] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 6.395412] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 6.400009] sysctl table check failed: /kernel/domainname .1.8 No proc_handler
[ 6.410003] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 6.416865] Call Trace:
[ 6.420004] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 6.424962] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 6.430019] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 6.436019] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 6.440005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 6.450004] [<ffffffff828c3330>] ? utsname_sysctl_init+0x0/0x3b
[ 6.456002] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 6.460005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 6.466089] [<ffffffff828c3353>] utsname_sysctl_init+0x23/0x3b
[ 6.470019] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 6.480005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 6.485569] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 6.490005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 6.495830] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.500004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.505742] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 6.510019] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 6.520004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 6.525743] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 6.530004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 6.535742] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 6.540004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 6.545916] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 6.550020] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 6.560004] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 6.564962] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 6.570004] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 6.575138] initcall utsname_sysctl_init+0x0/0x3b returned 0 after 839843 usecs
[ 6.580003] calling init_lstats_procfs+0x0/0x4c @ 1
[ 6.584973] initcall init_lstats_procfs+0x0/0x4c returned 0 after 0 usecs
[ 6.590018] calling ftrace_nodyn_init+0x0/0x37 @ 1
[ 6.600004] initcall ftrace_nodyn_init+0x0/0x37 returned 0 after 0 usecs
[ 6.606694] calling init_events+0x0/0x8c @ 1
[ 6.610010] initcall init_events+0x0/0x8c returned 0 after 0 usecs
[ 6.616183] calling init_sched_switch_trace+0x0/0x39 @ 1
[ 6.620007] initcall init_sched_switch_trace+0x0/0x39 returned 0 after 0 usecs
[ 6.627222] calling init_stack_trace+0x0/0x39 @ 1
[ 6.630021] initcall init_stack_trace+0x0/0x39 returned 0 after 0 usecs
[ 6.640003] calling init_function_trace+0x0/0x39 @ 1
[ 6.645050] initcall init_function_trace+0x0/0x39 returned 0 after 0 usecs
[ 6.650005] calling init_wakeup_tracer+0x0/0x49 @ 1
[ 6.654963] initcall init_wakeup_tracer+0x0/0x49 returned 0 after 0 usecs
[ 6.660003] calling stack_trace_init+0x0/0x91 @ 1
[ 6.664810] initcall stack_trace_init+0x0/0x91 returned 0 after 0 usecs
[ 6.670025] calling init_mmio_trace+0x0/0x39 @ 1
[ 6.680006] initcall init_mmio_trace+0x0/0x39 returned 0 after 0 usecs
[ 6.686521] calling init_power_trace+0x0/0x39 @ 1
[ 6.690005] initcall init_power_trace+0x0/0x39 returned 0 after 0 usecs
[ 6.696607] calling init_kmem_tracer+0x0/0x7d @ 1
[ 6.700004] Warning: could not register the kmem tracer
[ 6.705222] initcall init_kmem_tracer+0x0/0x7d returned 1 after 0 usecs
[ 6.710004] initcall init_kmem_tracer+0x0/0x7d returned with error code 1
[ 6.720004] calling init_blk_tracer+0x0/0x7e @ 1
[ 6.724702] initcall init_blk_tracer+0x0/0x7e returned 0 after 0 usecs
[ 6.730025] calling register_ftrace_syscalls+0x0/0xc5 @ 1
[ 6.735512] initcall register_ftrace_syscalls+0x0/0xc5 returned 0 after 0 usecs
[ 6.740004] calling init_ksym_trace+0x0/0x76 @ 1
[ 6.750012] initcall init_ksym_trace+0x0/0x76 returned 0 after 0 usecs
[ 6.756532] calling init_per_zone_wmark_min+0x0/0x8d @ 1
[ 6.760070] initcall init_per_zone_wmark_min+0x0/0x8d returned 0 after 0 usecs
[ 6.770003] calling pdflush_init+0x0/0x43 @ 1
[ 6.774705] initcall pdflush_init+0x0/0x43 returned 0 after 0 usecs
[ 6.780026] calling kswapd_init+0x0/0x97 @ 1
[ 6.784508] initcall kswapd_init+0x0/0x97 returned 0 after 0 usecs
[ 6.790004] calling init_tmpfs+0x0/0x64 @ 1
[ 6.794339] initcall init_tmpfs+0x0/0x64 returned 0 after 0 usecs
[ 6.800005] calling setup_vmstat+0x0/0xf0 @ 1
[ 6.804482] initcall setup_vmstat+0x0/0xf0 returned 0 after 0 usecs
[ 6.810004] calling mm_sysfs_init+0x0/0x50 @ 1
[ 6.814540] initcall mm_sysfs_init+0x0/0x50 returned 0 after 0 usecs
[ 6.820027] calling proc_vmalloc_init+0x0/0x4c @ 1
[ 6.824909] initcall proc_vmalloc_init+0x0/0x4c returned 0 after 0 usecs
[ 6.830004] calling procswaps_init+0x0/0x49 @ 1
[ 6.840012] initcall procswaps_init+0x0/0x49 returned 0 after 0 usecs
[ 6.846443] calling hugetlb_init+0x0/0x3cc @ 1
[ 6.850008] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 6.856381] initcall hugetlb_init+0x0/0x3cc returned 0 after 0 usecs
[ 6.860019] calling slab_proc_init+0x0/0x4c @ 1
[ 6.864643] initcall slab_proc_init+0x0/0x4c returned 0 after 0 usecs
[ 6.870004] calling slab_sysfs_init+0x0/0x119 @ 1
[ 6.954616] initcall slab_sysfs_init+0x0/0x119 returned 0 after 68359 usecs
[ 6.960110] calling fasync_init+0x0/0x51 @ 1
[ 6.975420] initcall fasync_init+0x0/0x51 returned 0 after 9765 usecs
[ 6.980132] calling proc_filesystems_init+0x0/0x49 @ 1
[ 6.985369] initcall proc_filesystems_init+0x0/0x49 returned 0 after 0 usecs
[ 6.990005] calling dnotify_init+0x0/0xa7 @ 1
[ 7.005625] initcall dnotify_init+0x0/0xa7 returned 0 after 9765 usecs
[ 7.010026] calling inotify_setup+0x0/0x37 @ 1
[ 7.014554] initcall inotify_setup+0x0/0x37 returned 0 after 0 usecs
[ 7.020004] calling aio_setup+0x0/0x9c @ 1
[ 7.050095] initcall aio_setup+0x0/0x9c returned 0 after 29296 usecs
[ 7.056443] calling proc_locks_init+0x0/0x49 @ 1
[ 7.060037] initcall proc_locks_init+0x0/0x49 returned 0 after 0 usecs
[ 7.066555] calling init_sys32_ioctl+0x0/0xac @ 1
[ 7.070019] initcall init_sys32_ioctl+0x0/0xac returned 0 after 0 usecs
[ 7.076625] calling init_mbcache+0x0/0x3b @ 1
[ 7.080005] initcall init_mbcache+0x0/0x3b returned 0 after 0 usecs
[ 7.086262] calling dquot_init+0x0/0x12a @ 1
[ 7.090002] VFS: Disk quotas dquot_6.5.2
[ 7.104868] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 7.110065] initcall dquot_init+0x0/0x12a returned 0 after 19531 usecs
[ 7.116581] calling init_v1_quota_format+0x0/0x39 @ 1
[ 7.120005] initcall init_v1_quota_format+0x0/0x39 returned 0 after 0 usecs
[ 7.126954] calling proc_cmdline_init+0x0/0x49 @ 1
[ 7.130014] initcall proc_cmdline_init+0x0/0x49 returned 0 after 0 usecs
[ 7.140004] calling proc_cpuinfo_init+0x0/0x49 @ 1
[ 7.144883] initcall proc_cpuinfo_init+0x0/0x49 returned 0 after 0 usecs
[ 7.150019] calling proc_devices_init+0x0/0x49 @ 1
[ 7.154902] initcall proc_devices_init+0x0/0x49 returned 0 after 0 usecs
[ 7.160004] calling proc_interrupts_init+0x0/0x49 @ 1
[ 7.165143] initcall proc_interrupts_init+0x0/0x49 returned 0 after 0 usecs
[ 7.170009] calling proc_loadavg_init+0x0/0x49 @ 1
[ 7.180012] initcall proc_loadavg_init+0x0/0x49 returned 0 after 0 usecs
[ 7.186702] calling proc_meminfo_init+0x0/0x49 @ 1
[ 7.190027] initcall proc_meminfo_init+0x0/0x49 returned 0 after 0 usecs
[ 7.200004] calling proc_stat_init+0x0/0x49 @ 1
[ 7.204623] initcall proc_stat_init+0x0/0x49 returned 0 after 0 usecs
[ 7.210004] calling proc_uptime_init+0x0/0x49 @ 1
[ 7.214798] initcall proc_uptime_init+0x0/0x49 returned 0 after 0 usecs
[ 7.220004] calling proc_version_init+0x0/0x49 @ 1
[ 7.224884] initcall proc_version_init+0x0/0x49 returned 0 after 0 usecs
[ 7.230019] calling proc_softirqs_init+0x0/0x49 @ 1
[ 7.234988] initcall proc_softirqs_init+0x0/0x49 returned 0 after 0 usecs
[ 7.240004] calling proc_kcore_init+0x0/0x70 @ 1
[ 7.250021] initcall proc_kcore_init+0x0/0x70 returned 0 after 0 usecs
[ 7.256537] calling proc_kmsg_init+0x0/0x4c @ 1
[ 7.260012] initcall proc_kmsg_init+0x0/0x4c returned 0 after 0 usecs
[ 7.266443] calling proc_page_init+0x0/0x69 @ 1
[ 7.270034] initcall proc_page_init+0x0/0x69 returned 0 after 0 usecs
[ 7.276470] calling configfs_init+0x0/0xfb @ 1
[ 7.291246] initcall configfs_init+0x0/0xfb returned 0 after 9765 usecs
[ 7.297849] calling init_devpts_fs+0x0/0x72 @ 1
[ 7.300135] initcall init_devpts_fs+0x0/0x72 returned 0 after 0 usecs
[ 7.306564] calling init_dlm+0x0/0xae @ 1
[ 7.321364] device: 'dlm-control': device_add
[ 7.325982] device: 'dlm-monitor': device_add
[ 7.342388] device: 'dlm_plock': device_add
[ 7.346791] DLM (built Aug 2 2009 22:49:30) installed
[ 7.350027] initcall init_dlm+0x0/0xae returned 0 after 39062 usecs
[ 7.356286] calling init_reiserfs_fs+0x0/0xb2 @ 1
[ 7.371489] initcall init_reiserfs_fs+0x0/0xb2 returned 0 after 9765 usecs
[ 7.378352] calling init_ext3_fs+0x0/0x99 @ 1
[ 7.391644] initcall init_ext3_fs+0x0/0x99 returned 0 after 9765 usecs
[ 7.398165] calling init_ext2_fs+0x0/0x99 @ 1
[ 7.411883] initcall init_ext2_fs+0x0/0x99 returned 0 after 9765 usecs
[ 7.418400] calling init_ext4_fs+0x0/0x111 @ 1
[ 7.433538] initcall init_ext4_fs+0x0/0x111 returned 0 after 9765 usecs
[ 7.440031] calling journal_init+0x0/0xf5 @ 1
[ 7.456339] initcall journal_init+0x0/0xf5 returned 0 after 9765 usecs
[ 7.460030] calling journal_init+0x0/0xd6 @ 1
[ 7.476480] initcall journal_init+0x0/0xd6 returned 0 after 9765 usecs
[ 7.480028] calling init_cramfs_fs+0x0/0x57 @ 1
[ 7.484673] initcall init_cramfs_fs+0x0/0x57 returned 0 after 0 usecs
[ 7.490005] calling init_ramfs_fs+0x0/0x39 @ 1
[ 7.494532] initcall init_ramfs_fs+0x0/0x39 returned 0 after 0 usecs
[ 7.500004] calling init_hugetlbfs_fs+0x0/0xbe @ 1
[ 7.521169] initcall init_hugetlbfs_fs+0x0/0xbe returned 0 after 19531 usecs
[ 7.528214] calling init_fat_fs+0x0/0x75 @ 1
[ 7.541176] initcall init_fat_fs+0x0/0x75 returned 0 after 9765 usecs
[ 7.547609] calling init_msdos_fs+0x0/0x39 @ 1
[ 7.550029] initcall init_msdos_fs+0x0/0x39 returned 0 after 0 usecs
[ 7.556372] calling init_bfs_fs+0x0/0x89 @ 1
[ 7.571734] initcall init_bfs_fs+0x0/0x89 returned 0 after 9765 usecs
[ 7.578168] calling init_iso9660_fs+0x0/0x89 @ 1
[ 7.590952] initcall init_iso9660_fs+0x0/0x89 returned 0 after 9765 usecs
[ 7.597727] calling init_hfs_fs+0x0/0x83 @ 1
[ 7.610719] initcall init_hfs_fs+0x0/0x83 returned 0 after 9765 usecs
[ 7.617150] calling ecryptfs_init+0x0/0x220 @ 1
[ 7.636642] device: 'ecryptfs': device_add
[ 7.640288] initcall ecryptfs_init+0x0/0x220 returned 0 after 19531 usecs
[ 7.647067] calling init_nls_cp437+0x0/0x39 @ 1
[ 7.650838] initcall init_nls_cp437+0x0/0x39 returned 0 after 0 usecs
[ 7.657273] calling init_nls_cp737+0x0/0x39 @ 1
[ 7.660005] initcall init_nls_cp737+0x0/0x39 returned 0 after 0 usecs
[ 7.670003] calling init_nls_cp775+0x0/0x39 @ 1
[ 7.674616] initcall init_nls_cp775+0x0/0x39 returned 0 after 0 usecs
[ 7.680003] calling init_nls_cp850+0x0/0x39 @ 1
[ 7.684615] initcall init_nls_cp850+0x0/0x39 returned 0 after 0 usecs
[ 7.690028] calling init_nls_cp852+0x0/0x39 @ 1
[ 7.694643] initcall init_nls_cp852+0x0/0x39 returned 0 after 0 usecs
[ 7.700003] calling init_nls_cp857+0x0/0x39 @ 1
[ 7.704616] initcall init_nls_cp857+0x0/0x39 returned 0 after 0 usecs
[ 7.710003] calling init_nls_cp861+0x0/0x39 @ 1
[ 7.714616] initcall init_nls_cp861+0x0/0x39 returned 0 after 0 usecs
[ 7.720003] calling init_nls_cp862+0x0/0x39 @ 1
[ 7.730019] initcall init_nls_cp862+0x0/0x39 returned 0 after 0 usecs
[ 7.736451] calling init_nls_cp863+0x0/0x39 @ 1
[ 7.740004] initcall init_nls_cp863+0x0/0x39 returned 0 after 0 usecs
[ 7.746432] calling init_nls_cp874+0x0/0x39 @ 1
[ 7.750004] initcall init_nls_cp874+0x0/0x39 returned 0 after 0 usecs
[ 7.756435] calling init_nls_cp932+0x0/0x39 @ 1
[ 7.760004] initcall init_nls_cp932+0x0/0x39 returned 0 after 0 usecs
[ 7.770018] calling init_nls_euc_jp+0x0/0x6f @ 1
[ 7.774721] initcall init_nls_euc_jp+0x0/0x6f returned 0 after 0 usecs
[ 7.780003] calling init_nls_cp936+0x0/0x39 @ 1
[ 7.784616] initcall init_nls_cp936+0x0/0x39 returned 0 after 0 usecs
[ 7.790003] calling init_nls_cp949+0x0/0x39 @ 1
[ 7.794616] initcall init_nls_cp949+0x0/0x39 returned 0 after 0 usecs
[ 7.800003] calling init_nls_cp950+0x0/0x39 @ 1
[ 7.804616] initcall init_nls_cp950+0x0/0x39 returned 0 after 0 usecs
[ 7.810018] calling init_nls_cp1250+0x0/0x39 @ 1
[ 7.814720] initcall init_nls_cp1250+0x0/0x39 returned 0 after 0 usecs
[ 7.820003] calling init_nls_cp1251+0x0/0x39 @ 1
[ 7.830004] initcall init_nls_cp1251+0x0/0x39 returned 0 after 0 usecs
[ 7.836519] calling init_nls_ascii+0x0/0x39 @ 1
[ 7.840004] initcall init_nls_ascii+0x0/0x39 returned 0 after 0 usecs
[ 7.846435] calling init_nls_iso8859_1+0x0/0x39 @ 1
[ 7.850019] initcall init_nls_iso8859_1+0x0/0x39 returned 0 after 0 usecs
[ 7.860003] calling init_nls_iso8859_4+0x0/0x39 @ 1
[ 7.864962] initcall init_nls_iso8859_4+0x0/0x39 returned 0 after 0 usecs
[ 7.870003] calling init_nls_iso8859_5+0x0/0x39 @ 1
[ 7.874960] initcall init_nls_iso8859_5+0x0/0x39 returned 0 after 0 usecs
[ 7.880003] calling init_nls_iso8859_6+0x0/0x39 @ 1
[ 7.884963] initcall init_nls_iso8859_6+0x0/0x39 returned 0 after 0 usecs
[ 7.890018] calling init_nls_iso8859_7+0x0/0x39 @ 1
[ 7.900004] initcall init_nls_iso8859_7+0x0/0x39 returned 0 after 0 usecs
[ 7.906781] calling init_nls_cp1255+0x0/0x39 @ 1
[ 7.910004] initcall init_nls_cp1255+0x0/0x39 returned 0 after 0 usecs
[ 7.916522] calling init_nls_iso8859_9+0x0/0x39 @ 1
[ 7.920004] initcall init_nls_iso8859_9+0x0/0x39 returned 0 after 0 usecs
[ 7.930018] calling init_nls_iso8859_14+0x0/0x39 @ 1
[ 7.935067] initcall init_nls_iso8859_14+0x0/0x39 returned 0 after 0 usecs
[ 7.940003] calling init_nls_koi8_r+0x0/0x39 @ 1
[ 7.944703] initcall init_nls_koi8_r+0x0/0x39 returned 0 after 0 usecs
[ 7.950005] calling init_sysv_fs+0x0/0x75 @ 1
[ 7.965022] initcall init_sysv_fs+0x0/0x75 returned 0 after 9765 usecs
[ 7.970091] calling init_ntfs_fs+0x0/0x253 @ 1
[ 7.974615] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[ 7.992350] initcall init_ntfs_fs+0x0/0x253 returned 0 after 19531 usecs
[ 7.999047] calling init_ufs_fs+0x0/0x89 @ 1
[ 8.011586] initcall init_ufs_fs+0x0/0x89 returned 0 after 9765 usecs
[ 8.018020] calling init_efs_fs+0x0/0x95 @ 1
[ 8.020021] EFS: 1.0a - http://aeschi.ch.eu.org/efs/
[ 8.035735] initcall init_efs_fs+0x0/0x95 returned 0 after 9765 usecs
[ 8.040030] calling init_romfs_fs+0x0/0xab @ 1
[ 8.044555] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 8.061332] initcall init_romfs_fs+0x0/0xab returned 0 after 19531 usecs
[ 8.068025] calling init_qnx4_fs+0x0/0x99 @ 1
[ 8.080617] QNX4 filesystem 0.2.3 registered.
[ 8.084973] initcall init_qnx4_fs+0x0/0x99 returned 0 after 9765 usecs
[ 8.090004] calling init_autofs_fs+0x0/0x39 @ 1
[ 8.094615] initcall init_autofs_fs+0x0/0x39 returned 0 after 0 usecs
[ 8.100003] calling init_autofs4_fs+0x0/0x4c @ 1
[ 8.104702] initcall init_autofs4_fs+0x0/0x4c returned -16 after 0 usecs
[ 8.110004] initcall init_autofs4_fs+0x0/0x4c returned with error code -16
[ 8.120025] calling fuse_init+0x0/0x15c @ 1
[ 8.124295] fuse init (API version 7.12)
[ 8.139711] device: 'fuse': device_add
[ 8.151362] initcall fuse_init+0x0/0x15c returned 0 after 29296 usecs
[ 8.157795] calling init_udf_fs+0x0/0x89 @ 1
[ 8.171133] initcall init_udf_fs+0x0/0x89 returned 0 after 9765 usecs
[ 8.177562] calling init_omfs_fs+0x0/0x39 @ 1
[ 8.180008] initcall init_omfs_fs+0x0/0x39 returned 0 after 0 usecs
[ 8.186268] calling init_jfs_fs+0x0/0x1f8 @ 1
[ 8.202499] JFS: nTxBlock = 7700, nTxLock = 61601
[ 8.214301] initcall init_jfs_fs+0x0/0x1f8 returned 0 after 19531 usecs
[ 8.220098] calling init_nilfs_fs+0x0/0xb9 @ 1
[ 8.226415] initcall init_nilfs_fs+0x0/0xb9 returned 0 after 0 usecs
[ 8.230029] calling ocfs2_init+0x0/0x4c5 @ 1
[ 8.234386] OCFS2 1.5.0
[ 8.260226] initcall ocfs2_init+0x0/0x4c5 returned 0 after 29296 usecs
[ 8.266748] calling ocfs2_stack_glue_init+0x0/0xbb @ 1
[ 8.270290] initcall ocfs2_stack_glue_init+0x0/0xbb returned 0 after 0 usecs
[ 8.277325] calling o2cb_stack_init+0x0/0x39 @ 1
[ 8.280003] ocfs2: Registered cluster interface o2cb
[ 8.284962] initcall o2cb_stack_init+0x0/0x39 returned 0 after 0 usecs
[ 8.290003] calling init_o2nm+0x0/0xcf @ 1
[ 8.294182] OCFS2 Node Manager 1.5.0
[ 8.312148] initcall init_o2nm+0x0/0xcf returned 0 after 19531 usecs
[ 8.318494] calling dlm_init+0x0/0x38a @ 1
[ 8.320042] OCFS2 DLM 1.5.0
[ 8.334832] initcall dlm_init+0x0/0x38a returned 0 after 9765 usecs
[ 8.340030] calling init_dlmfs_fs+0x0/0x106 @ 1
[ 8.344646] OCFS2 DLMFS 1.5.0
[ 8.358507] OCFS2 User DLM kernel interface loaded
[ 8.360023] initcall init_dlmfs_fs+0x0/0x106 returned 0 after 19531 usecs
[ 8.370004] calling init_gfs2_fs+0x0/0x20d @ 1
[ 8.382435] GFS2 (built Aug 2 2009 22:49:39) installed
[ 8.387660] initcall init_gfs2_fs+0x0/0x20d returned 0 after 9765 usecs
[ 8.390030] calling ipc_init+0x0/0x56 @ 1
[ 8.394148] msgmni has been set to 1925
[ 8.400023] initcall ipc_init+0x0/0x56 returned 0 after 9765 usecs
[ 8.406200] calling ipc_sysctl_init+0x0/0x3b @ 1
[ 8.410027] sysctl table check failed: /kernel/shmmax .1.34 No proc_handler
[ 8.420005] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 8.426868] Call Trace:
[ 8.429324] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 8.430021] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 8.440005] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 8.446005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 8.450005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 8.456437] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[ 8.460005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 8.470025] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 8.476115] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[ 8.480006] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 8.485665] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 8.490007] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 8.500006] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 8.505830] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.510019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.515759] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 8.520006] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 8.525490] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.530004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 8.540004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 8.545742] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 8.550020] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 8.555934] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 8.560006] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 8.565404] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 8.570005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 8.575394] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 8.580011] sysctl table check failed: /kernel/shmall .1.41 No proc_handler
[ 8.590018] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 8.596883] Call Trace:
[ 8.600005] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 8.604963] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 8.610004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 8.616001] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 8.620005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 8.630020] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[ 8.635671] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 8.640005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 8.646088] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[ 8.650005] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 8.655655] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 8.660005] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 8.670020] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 8.675848] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.680004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.685743] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 8.690004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 8.700004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.705743] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 8.710019] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 8.715760] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 8.720005] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 8.725917] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 8.730007] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 8.735405] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 8.740005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 8.745396] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 8.750026] sysctl table check failed: /kernel/shmmni .1.45 No proc_handler
[ 8.762156] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 8.769021] Call Trace:
[ 8.770004] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 8.774962] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 8.780004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 8.786004] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 8.790020] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 8.800004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[ 8.805656] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 8.810005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 8.816088] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[ 8.820004] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 8.830020] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 8.835588] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 8.840005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 8.845829] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.850004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.855742] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 8.860004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 8.870019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 8.875758] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 8.880004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 8.885741] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 8.890004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 8.895916] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 8.900005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 8.910019] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 8.914982] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 8.920004] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 8.925143] sysctl table check failed: /kernel/msgmax .1.35 No proc_handler
[ 8.932778] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 8.939645] Call Trace:
[ 8.940004] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 8.944963] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 8.950019] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 8.956020] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 8.960005] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 8.970004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[ 8.975658] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 8.980005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 8.990022] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[ 8.995586] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 9.000005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 9.005569] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 9.010005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 9.015829] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.020004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.030019] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 9.036019] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 9.040011] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.045751] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 9.050005] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 9.055743] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 9.060004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 9.070020] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 9.075327] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 9.080004] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 9.084965] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 9.090004] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 9.095141] sysctl table check failed: /kernel/msgmni .1.42 No proc_handler
[ 9.103402] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 9.110017] Call Trace:
[ 9.112468] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 9.117432] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 9.120004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 9.130005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 9.136521] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 9.140004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[ 9.145656] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 9.150020] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 9.160004] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[ 9.165569] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 9.170005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 9.175569] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 9.180005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 9.185831] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.190019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.200005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 9.206002] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 9.210004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.215743] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 9.220004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 9.225743] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 9.230019] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 9.240005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 9.245311] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 9.250006] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 9.254972] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 9.260004] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 9.265142] sysctl table check failed: /kernel/msgmnb .1.36 No proc_handler
[ 9.273419] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 9.280002] Call Trace:
[ 9.282451] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 9.287413] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 9.290004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 9.300005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 9.306522] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 9.310019] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[ 9.315674] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 9.320005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 9.330004] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[ 9.335571] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 9.340005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 9.345570] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 9.350020] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 9.360004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.365743] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.370005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 9.376002] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 9.380004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.385743] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 9.390019] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 9.400004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 9.405917] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 9.410005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 9.415308] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 9.420004] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 9.424962] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 9.430019] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 9.435161] sysctl table check failed: /kernel/sem .1.43 No proc_handler
[ 9.443144] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 9.450002] Call Trace:
[ 9.452453] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 9.457413] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 9.460004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 9.470020] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 9.476539] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 9.480004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[ 9.490005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 9.496090] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 9.500004] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[ 9.505569] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 9.510022] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 9.515587] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 9.520005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 9.530004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.535742] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.540005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 9.546002] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 9.550019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.560005] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 9.565394] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 9.570004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 9.575915] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 9.580005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 9.585310] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 9.590019] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 9.594982] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 9.600004] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 9.605142] sysctl table check failed: /kernel/auto_msgmni No proc_handler
[ 9.613367] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 9.620002] Call Trace:
[ 9.622453] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 9.630019] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 9.636019] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 9.640005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 9.646521] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 9.650004] [<ffffffff828ce5ad>] ? ipc_sysctl_init+0x0/0x3b
[ 9.660005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 9.666090] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 9.670019] [<ffffffff828ce5d0>] ipc_sysctl_init+0x23/0x3b
[ 9.675587] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 9.680005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 9.690005] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 9.696090] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 9.700004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.705743] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.710019] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 9.716020] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 9.720004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.730004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 9.735396] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 9.740004] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 9.745915] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 9.750020] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 9.755327] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 9.760004] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 9.764963] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 9.770006] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 9.780007] initcall ipc_sysctl_init+0x0/0x3b returned 0 after 1337890 usecs
[ 9.787048] calling init_mqueue_fs+0x0/0xee @ 1
[ 9.800719] sysctl table check failed: /fs/mqueue/queues_max No proc_handler
[ 9.807935] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 9.810025] Call Trace:
[ 9.812478] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 9.820005] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 9.826002] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 9.830004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 9.840005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 9.846531] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 9.850020] [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34
[ 9.855673] [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6
[ 9.860005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 9.870005] [<ffffffff813ffe15>] ? init_once+0x0/0x3b
[ 9.875135] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 9.880004] [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40
[ 9.886349] [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee
[ 9.890019] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[ 9.895586] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[ 9.900005] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 9.910005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 9.915570] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 9.920005] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 9.925829] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.930019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.935760] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 9.940005] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 9.950004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 9.955742] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 9.960004] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 9.965743] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 9.970019] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 9.980005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 9.985319] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 9.990004] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 9.994963] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 10.000004] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 10.005142] sysctl table check failed: /fs/mqueue/msg_max No proc_handler
[ 10.013031] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 10.020002] Call Trace:
[ 10.022451] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 10.027412] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 10.030007] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 10.036010] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 10.040005] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 10.050020] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 10.056451] [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34
[ 10.060005] [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6
[ 10.070005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 10.076089] [<ffffffff813ffe15>] ? init_once+0x0/0x3b
[ 10.080005] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 10.086089] [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40
[ 10.090019] [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee
[ 10.095501] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[ 10.100004] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[ 10.110004] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 10.115657] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 10.120005] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 10.126089] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 10.130019] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 10.135758] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 10.140005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 10.150004] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 10.155484] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 10.160004] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 10.165395] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 10.170019] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 10.175933] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 10.180005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 10.190005] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 10.195396] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 10.200005] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 10.205404] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 10.210024] sysctl table check failed: /fs/mqueue/msgsize_max No proc_handler
[ 10.217327] Pid: 1, comm: swapper Tainted: G W 2.6.31-rc5-tip #291
[ 10.220002] Call Trace:
[ 10.222451] [<ffffffff810a0b5c>] set_fail+0x5a/0x7c
[ 10.230004] [<ffffffff810a107c>] sysctl_check_table+0x4fe/0x5b7
[ 10.236003] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 10.240004] [<ffffffff810a1095>] sysctl_check_table+0x517/0x5b7
[ 10.250020] [<ffffffff810857d4>] ? __register_sysctl_paths+0x69/0x2cd
[ 10.256540] [<ffffffff81085876>] __register_sysctl_paths+0x10b/0x2cd
[ 10.260005] [<ffffffff8145a27a>] ? kobject_uevent+0x1e/0x34
[ 10.265657] [<ffffffff81118ef5>] ? sysfs_slab_add+0x1a4/0x1e6
[ 10.270005] [<ffffffff81085a79>] register_sysctl_paths+0x41/0x57
[ 10.280004] [<ffffffff813ffe15>] ? init_once+0x0/0x3b
[ 10.285137] [<ffffffff81085aba>] register_sysctl_table+0x2b/0x41
[ 10.290022] [<ffffffff814016c0>] mq_register_sysctl_table+0x28/0x40
[ 10.296367] [<ffffffff828ce639>] init_mqueue_fs+0x51/0xee
[ 10.300004] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[ 10.310004] [<ffffffff828ce5e8>] ? init_mqueue_fs+0x0/0xee
[ 10.315571] [<ffffffff810090b6>] do_one_initcall+0x84/0x1a8
[ 10.320005] [<ffffffff81117da5>] ? __slab_free+0x14a/0x36f
[ 10.325570] [<ffffffff814581d3>] ? ida_get_new_above+0x1b5/0x1ea
[ 10.330020] [<ffffffff810a88a4>] ? __lock_acquire+0x23a/0x472
[ 10.335844] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 10.340004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 10.350005] [<ffffffff810afd93>] ? test_ti_thread_flag+0xd/0x3a
[ 10.356002] [<ffffffff81ed39d9>] ? _spin_unlock+0x63/0x87
[ 10.360004] [<ffffffff8117aeb4>] ? proc_register+0x131/0x1bb
[ 10.365742] [<ffffffff81458229>] ? ida_get_new+0x21/0x37
[ 10.370019] [<ffffffff8117af16>] ? proc_register+0x193/0x1bb
[ 10.375759] [<ffffffff8117b0a4>] ? create_proc_entry+0x92/0xbe
[ 10.380004] [<ffffffff810bbce1>] ? register_irq_proc+0xc2/0xf2
[ 10.390005] [<ffffffff810b84dd>] ? irq_to_desc+0xd/0x50
[ 10.395311] [<ffffffff828ac8f9>] kernel_init+0x159/0x1c5
[ 10.400004] [<ffffffff8102f34a>] child_rip+0xa/0x20
[ 10.404964] [<ffffffff828ac7a0>] ? kernel_init+0x0/0x1c5
[ 10.410019] [<ffffffff8102f340>] ? child_rip+0x0/0x20
[ 10.415290] initcall init_mqueue_fs+0x0/0xee returned 0 after 605468 usecs
[ 10.420004] calling key_proc_init+0x0/0x5a @ 1
[ 10.424550] initcall key_proc_init+0x0/0x5a returned 0 after 0 usecs
[ 10.430004] calling crypto_wq_init+0x0/0x59 @ 1
[ 10.434817] initcall crypto_wq_init+0x0/0x59 returned 0 after 0 usecs
[ 10.440049] calling crypto_algapi_init+0x0/0x34 @ 1
[ 10.450014] initcall crypto_algapi_init+0x0/0x34 returned 0 after 0 usecs
[ 10.456798] calling chainiv_module_init+0x0/0x39 @ 1
[ 10.460007] initcall chainiv_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.466875] calling eseqiv_module_init+0x0/0x39 @ 1
[ 10.470006] initcall eseqiv_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.480019] calling seqiv_module_init+0x0/0x39 @ 1
[ 10.484895] initcall seqiv_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.490003] calling hmac_module_init+0x0/0x39 @ 1
[ 10.494789] initcall hmac_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.500004] calling crypto_xcbc_module_init+0x0/0x39 @ 1
[ 10.510005] initcall crypto_xcbc_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.517221] calling crypto_null_mod_init+0x0/0xa5 @ 1
[ 10.520117] alg: No test for cipher_null (cipher_null-generic)
[ 10.526097] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 10.530179] alg: No test for digest_null (digest_null-generic)
[ 10.540174] alg: No test for compress_null (compress_null-generic)
[ 10.546359] initcall crypto_null_mod_init+0x0/0xa5 returned 0 after 19531 usecs
[ 10.550025] calling md4_mod_init+0x0/0x39 @ 1
[ 10.554659] initcall md4_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.560051] calling md5_mod_init+0x0/0x39 @ 1
[ 10.564663] initcall md5_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.570053] calling rmd128_mod_init+0x0/0x39 @ 1
[ 10.580162] initcall rmd128_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.586677] calling rmd160_mod_init+0x0/0x39 @ 1
[ 10.590216] initcall rmd160_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.596736] calling rmd256_mod_init+0x0/0x39 @ 1
[ 10.600185] initcall rmd256_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.610054] calling sha1_generic_mod_init+0x0/0x39 @ 1
[ 10.615423] initcall sha1_generic_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.620022] calling sha256_generic_mod_init+0x0/0x65 @ 1
[ 10.625722] initcall sha256_generic_mod_init+0x0/0x65 returned 0 after 0 usecs
[ 10.630055] calling wp512_mod_init+0x0/0x8a @ 1
[ 10.640627] initcall wp512_mod_init+0x0/0x8a returned 0 after 0 usecs
[ 10.647058] calling tgr192_mod_init+0x0/0x8a @ 1
[ 10.650553] initcall tgr192_mod_init+0x0/0x8a returned 0 after 0 usecs
[ 10.657073] calling crypto_ecb_module_init+0x0/0x39 @ 1
[ 10.660173] initcall crypto_ecb_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.670004] calling crypto_cbc_module_init+0x0/0x39 @ 1
[ 10.675310] initcall crypto_cbc_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.680004] calling crypto_module_init+0x0/0x39 @ 1
[ 10.684963] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.690003] calling crypto_module_init+0x0/0x39 @ 1
[ 10.700021] initcall crypto_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.706798] calling crypto_ctr_module_init+0x0/0x69 @ 1
[ 10.710006] initcall crypto_ctr_module_init+0x0/0x69 returned 0 after 0 usecs
[ 10.720004] calling cryptd_init+0x0/0x109 @ 1
[ 10.724450] initcall cryptd_init+0x0/0x109 returned 0 after 0 usecs
[ 10.730004] calling des_generic_mod_init+0x0/0x65 @ 1
[ 10.735530] initcall des_generic_mod_init+0x0/0x65 returned 0 after 0 usecs
[ 10.740099] calling fcrypt_mod_init+0x0/0x39 @ 1
[ 10.744891] alg: No test for fcrypt (fcrypt-generic)
[ 10.751125] initcall fcrypt_mod_init+0x0/0x39 returned 0 after 9765 usecs
[ 10.760024] calling blowfish_mod_init+0x0/0x39 @ 1
[ 10.765837] initcall blowfish_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.770024] calling twofish_mod_init+0x0/0x39 @ 1
[ 10.775129] initcall twofish_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.780008] calling aes_init+0x0/0x39 @ 1
[ 10.784301] initcall aes_init+0x0/0x39 returned 0 after 0 usecs
[ 10.790004] calling cast5_mod_init+0x0/0x39 @ 1
[ 10.800209] initcall cast5_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.806641] calling cast6_mod_init+0x0/0x39 @ 1
[ 10.810222] initcall cast6_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.816652] calling arc4_init+0x0/0x39 @ 1
[ 10.820198] initcall arc4_init+0x0/0x39 returned 0 after 0 usecs
[ 10.826200] calling tea_mod_init+0x0/0x8a @ 1
[ 10.830601] initcall tea_mod_init+0x0/0x8a returned 0 after 0 usecs
[ 10.840004] calling khazad_mod_init+0x0/0x39 @ 1
[ 10.844896] initcall khazad_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.850004] calling anubis_mod_init+0x0/0x39 @ 1
[ 10.854984] initcall anubis_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.860004] calling seed_init+0x0/0x39 @ 1
[ 10.864360] initcall seed_init+0x0/0x39 returned 0 after 0 usecs
[ 10.870004] calling deflate_mod_init+0x0/0x39 @ 1
[ 10.875615] initcall deflate_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.880004] calling zlib_mod_init+0x0/0x39 @ 1
[ 10.891249] initcall zlib_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.897594] calling michael_mic_init+0x0/0x39 @ 1
[ 10.900195] initcall michael_mic_init+0x0/0x39 returned 0 after 0 usecs
[ 10.906797] calling crc32c_mod_init+0x0/0x39 @ 1
[ 10.910215] initcall crc32c_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.920005] calling crypto_authenc_module_init+0x0/0x39 @ 1
[ 10.925655] initcall crypto_authenc_module_init+0x0/0x39 returned 0 after 0 usecs
[ 10.930004] calling lzo_mod_init+0x0/0x39 @ 1
[ 10.934737] initcall lzo_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 10.940005] calling krng_mod_init+0x0/0x39 @ 1
[ 10.944614] alg: No test for stdrng (krng)
[ 10.950132] initcall krng_mod_init+0x0/0x39 returned 0 after 9765 usecs
[ 10.960004] calling proc_genhd_init+0x0/0x63 @ 1
[ 10.964723] initcall proc_genhd_init+0x0/0x63 returned 0 after 0 usecs
[ 10.970004] calling bsg_init+0x0/0x155 @ 1
[ 10.974695] device class 'bsg': registering
[ 10.980243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 10.987629] initcall bsg_init+0x0/0x155 returned 0 after 9765 usecs
[ 10.990004] calling noop_init+0x0/0x3b @ 1
[ 10.994209] io scheduler noop registered (default)
[ 11.000004] initcall noop_init+0x0/0x3b returned 0 after 9765 usecs
[ 11.006260] calling as_init+0x0/0x3b @ 1
[ 11.010003] io scheduler anticipatory registered
[ 11.014617] initcall as_init+0x0/0x3b returned 0 after 0 usecs
[ 11.020025] calling deadline_init+0x0/0x3b @ 1
[ 11.024554] io scheduler deadline registered
[ 11.030004] initcall deadline_init+0x0/0x3b returned 0 after 9765 usecs
[ 11.036607] calling debug_objects_init_debugfs+0x0/0x8a @ 1
[ 11.040035] initcall debug_objects_init_debugfs+0x0/0x8a returned 0 after 0 usecs
[ 11.050004] calling libcrc32c_mod_init+0x0/0x53 @ 1
[ 11.054967] initcall libcrc32c_mod_init+0x0/0x53 returned 0 after 0 usecs
[ 11.060019] calling percpu_counter_startup+0x0/0x54 @ 1
[ 11.065326] initcall percpu_counter_startup+0x0/0x54 returned 0 after 0 usecs
[ 11.070007] calling pci_init+0x0/0x60 @ 1
[ 11.080015] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.086272] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.090005] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xe3
[ 11.095834] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.100019] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.110003] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xe3
[ 11.115834] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.120004] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.130003] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xe3
[ 11.135834] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.140019] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.170025] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe3
[ 11.175864] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.180005] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.186623] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xe3
[ 11.190010] pci 0000:00:04.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.200004] pci 0000:00:04.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.206609] pci 0000:00:04.0: calling pci_fixup_video+0x0/0xe3
[ 11.210010] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.216270] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.220026] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xe3
[ 11.230010] pci 0000:00:09.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.236271] pci 0000:00:09.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.240004] pci 0000:00:09.0: calling pci_fixup_video+0x0/0xe3
[ 11.250010] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.256271] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.260019] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xe3
[ 11.265852] pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1
[ 11.270005] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.280004] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.286607] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xe3
[ 11.290010] pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1
[ 11.300019] pci 0000:00:0c.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.306278] pci 0000:00:0c.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.310003] pci 0000:00:0c.0: calling pci_fixup_video+0x0/0xe3
[ 11.320010] pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1
[ 11.327568] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.330006] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.340018] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xe3
[ 11.345853] pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0xa1
[ 11.350004] pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.360004] pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.366607] pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xe3
[ 11.370010] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x76
[ 11.380022] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.386278] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.390003] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xe3
[ 11.395833] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x76
[ 11.400006] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.410004] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.416609] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xe3
[ 11.420024] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x76
[ 11.430006] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.436269] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.440003] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xe3
[ 11.445835] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x76
[ 11.450006] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.460019] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.466624] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xe3
[ 11.470010] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.476270] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.480004] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xe3
[ 11.490010] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.496271] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.500018] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xe3
[ 11.510004] pci 0000:01:00.0: Boot video device
[ 11.514536] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x4e
[ 11.520004] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x63e
[ 11.526609] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xe3
[ 11.530009] initcall pci_init+0x0/0x60 returned 0 after 439453 usecs
[ 11.540019] calling pci_proc_init+0x0/0x90 @ 1
[ 11.544850] initcall pci_proc_init+0x0/0x90 returned 0 after 0 usecs
[ 11.550004] calling pci_hotplug_init+0x0/0x74 @ 1
[ 11.554788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.560004] initcall pci_hotplug_init+0x0/0x74 returned 0 after 9765 usecs
[ 11.566867] calling zt5550_init+0x0/0xa3 @ 1
[ 11.570002] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[ 11.580021] bus: 'pci': add driver zt5550_hc
[ 11.584558] initcall zt5550_init+0x0/0xa3 returned 0 after 9765 usecs
[ 11.590008] calling cpcihp_generic_init+0x0/0x443 @ 1
[ 11.595142] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[ 11.600002] cpcihp_generic: not configured, disabling.
[ 11.605136] initcall cpcihp_generic_init+0x0/0x443 returned -22 after 9765 usecs
[ 11.610004] initcall cpcihp_generic_init+0x0/0x443 returned with error code -22
[ 11.620004] calling shpcd_init+0x0/0x88 @ 1
[ 11.624270] bus: 'pci': add driver shpchp
[ 11.630040] bus: 'pci': driver_probe_device: matched device 0000:00:0b.0 with driver shpchp
[ 11.640003] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0b.0
[ 11.647918] bus: 'pci': driver_probe_device: matched device 0000:00:0c.0 with driver shpchp
[ 11.650019] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0c.0
[ 11.660147] bus: 'pci': driver_probe_device: matched device 0000:00:0d.0 with driver shpchp
[ 11.670057] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0d.0
[ 11.680157] bus: 'pci': driver_probe_device: matched device 0000:00:0e.0 with driver shpchp
[ 11.688493] bus: 'pci': really_probe: probing driver shpchp with device 0000:00:0e.0
[ 11.690459] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.700058] initcall shpcd_init+0x0/0x88 returned 0 after 78125 usecs
[ 11.710004] calling init_legacy+0x0/0x69 @ 1
[ 11.714648] initcall init_legacy+0x0/0x69 returned 0 after 0 usecs
[ 11.720004] calling tdo24m_init+0x0/0x39 @ 1
[ 11.724357] bus: 'spi': add driver tdo24m
[ 11.730232] initcall tdo24m_init+0x0/0x39 returned 0 after 9765 usecs
[ 11.736669] calling kb3886_init+0x0/0x32 @ 1
[ 11.740071] initcall kb3886_init+0x0/0x32 returned -19 after 0 usecs
[ 11.746415] calling display_class_init+0x0/0xa5 @ 1
[ 11.750004] device class 'display': registering
[ 11.754753] initcall display_class_init+0x0/0xa5 returned 0 after 0 usecs
[ 11.760026] calling rand_initialize+0x0/0x58 @ 1
[ 11.764761] initcall rand_initialize+0x0/0x58 returned 0 after 0 usecs
[ 11.770004] calling tty_init+0x0/0x11c @ 1
[ 11.774192] device: 'tty': device_add
[ 11.780256] device: 'console': device_add
[ 11.784483] device: 'tty0': device_add
[ 11.790282] device class 'vc': registering
[ 11.794596] device: 'vcs': device_add
[ 11.800199] device: 'vcsa': device_add
[ 11.804190] device: 'vcs1': device_add
[ 11.808152] device: 'vcsa1': device_add
[ 11.810274] device: 'tty1': device_add
[ 11.814291] device: 'tty2': device_add
[ 11.820435] device: 'tty3': device_add
[ 11.824414] device: 'tty4': device_add
[ 11.828383] device: 'tty5': device_add
[ 11.830409] device: 'tty6': device_add
[ 11.834375] device: 'tty7': device_add
[ 11.840251] device: 'tty8': device_add
[ 11.844259] device: 'tty9': device_add
[ 11.848241] device: 'tty10': device_add
[ 11.850251] device: 'tty11': device_add
[ 11.854305] device: 'tty12': device_add
[ 11.860245] device: 'tty13': device_add
[ 11.864310] device: 'tty14': device_add
[ 11.868358] device: 'tty15': device_add
[ 11.870285] device: 'tty16': device_add
[ 11.874341] device: 'tty17': device_add
[ 11.880229] device: 'tty18': device_add
[ 11.884333] device: 'tty19': device_add
[ 11.888387] device: 'tty20': device_add
[ 11.890304] device: 'tty21': device_add
[ 11.894358] device: 'tty22': device_add
[ 11.900234] device: 'tty23': device_add
[ 11.904304] device: 'tty24': device_add
[ 11.908378] device: 'tty25': device_add
[ 11.910285] device: 'tty26': device_add
[ 11.914343] device: 'tty27': device_add
[ 11.920232] device: 'tty28': device_add
[ 11.924323] device: 'tty29': device_add
[ 11.930583] device: 'tty30': device_add
[ 11.934636] device: 'tty31': device_add
[ 11.938689] device: 'tty32': device_add
[ 11.940257] device: 'tty33': device_add
[ 11.944339] device: 'tty34': device_add
[ 11.950425] device: 'tty35': device_add
[ 11.954498] device: 'tty36': device_add
[ 11.958560] device: 'tty37': device_add
[ 11.960312] device: 'tty38': device_add
[ 11.964416] device: 'tty39': device_add
[ 11.970271] device: 'tty40': device_add
[ 11.974362] device: 'tty41': device_add
[ 11.978412] device: 'tty42': device_add
[ 11.980250] device: 'tty43': device_add
[ 11.984308] device: 'tty44': device_add
[ 11.990259] device: 'tty45': device_add
[ 11.994316] device: 'tty46': device_add
[ 12.000630] device: 'tty47': device_add
[ 12.004691] device: 'tty48': device_add
[ 12.008785] device: 'tty49': device_add
[ 12.010226] device: 'tty50': device_add
[ 12.014339] device: 'tty51': device_add
[ 12.020266] device: 'tty52': device_add
[ 12.024375] device: 'tty53': device_add
[ 12.028433] device: 'tty54': device_add
[ 12.030269] device: 'tty55': device_add
[ 12.034336] device: 'tty56': device_add
[ 12.040295] device: 'tty57': device_add
[ 12.044354] device: 'tty58': device_add
[ 12.048448] device: 'tty59': device_add
[ 12.050240] device: 'tty60': device_add
[ 12.054313] device: 'tty61': device_add
[ 12.060252] device: 'tty62': device_add
[ 12.064308] device: 'tty63': device_add
[ 12.070630] initcall tty_init+0x0/0x11c returned 0 after 292968 usecs
[ 12.077059] calling pty_init+0x0/0x35d @ 1
[ 12.080087] device: 'ptmx': device_add
[ 12.084072] initcall pty_init+0x0/0x35d returned 0 after 0 usecs
[ 12.090036] calling sysrq_init+0x0/0x4c @ 1
[ 12.094322] initcall sysrq_init+0x0/0x4c returned 0 after 0 usecs
[ 12.100004] calling nozomi_init+0x0/0x153 @ 1
[ 12.104441] Initializing Nozomi driver 2.1d (build date: Aug 2 2009 22:49:23)
[ 12.110030] bus: 'pci': add driver nozomi
[ 12.114293] initcall nozomi_init+0x0/0x153 returned 0 after 9765 usecs
[ 12.120059] calling lp_init_module+0x0/0x259 @ 1
[ 12.124771] device class 'printer': registering
[ 12.130247] lp: driver loaded but no devices found
[ 12.135032] initcall lp_init_module+0x0/0x259 returned 0 after 9765 usecs
[ 12.140025] calling rtc_init+0x0/0x12c @ 1
[ 12.144228] device: 'rtc': device_add
[ 12.150263] Real Time Clock Driver v1.12b
[ 12.154270] initcall rtc_init+0x0/0x12c returned 0 after 9765 usecs
[ 12.160024] calling mod_init+0x0/0x73 @ 1
[ 12.164121] initcall mod_init+0x0/0x73 returned -19 after 0 usecs
[ 12.170004] calling ppdev_init+0x0/0xe2 @ 1
[ 12.174277] device class 'ppdev': registering
[ 12.180212] ppdev: user-space parallel port driver
[ 12.184999] initcall ppdev_init+0x0/0xe2 returned 0 after 9765 usecs
[ 12.190007] calling tlclk_init+0x0/0x274 @ 1
[ 12.194382] telclk_interrup = 0xf non-mcpbl0010 hw.
[ 12.200030] initcall tlclk_init+0x0/0x274 returned -6 after 9765 usecs
[ 12.206547] initcall tlclk_init+0x0/0x274 returned with error code -6
[ 12.210004] calling mwave_init+0x0/0x2ca @ 1
[ 12.220008] smapi::smapi_init, ERROR invalid usSmapiID
[ 12.225142] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 12.230025] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 12.240002] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 12.246261] initcall mwave_init+0x0/0x2ca returned -5 after 19531 usecs
[ 12.250004] initcall mwave_init+0x0/0x2ca returned with error code -5
[ 12.260004] calling agp_init+0x0/0x4b @ 1
[ 12.264094] Linux agpgart interface v0.103
[ 12.270019] initcall agp_init+0x0/0x4b returned 0 after 9765 usecs
[ 12.276192] calling agp_amd64_init+0x0/0xe8 @ 1
[ 12.280003] bus: 'pci': add driver agpgart-amd64
[ 12.285079] initcall agp_amd64_init+0x0/0xe8 returned -19 after 0 usecs
[ 12.290005] calling agp_intel_init+0x0/0x50 @ 1
[ 12.294615] bus: 'pci': add driver agpgart-intel
[ 12.300241] initcall agp_intel_init+0x0/0x50 returned 0 after 9765 usecs
[ 12.306936] calling agp_sis_init+0x0/0x50 @ 1
[ 12.310004] bus: 'pci': add driver agpgart-sis
[ 12.314705] initcall agp_sis_init+0x0/0x50 returned 0 after 0 usecs
[ 12.320005] calling ipmi_init_msghandler_mod+0x0/0x34 @ 1
[ 12.325482] bus: 'platform': add driver ipmi
[ 12.330221] ipmi message handler version 39.2
[ 12.334587] initcall ipmi_init_msghandler_mod+0x0/0x34 returned 0 after 9765 usecs
[ 12.340005] calling ipmi_wdog_init+0x0/0x153 @ 1
[ 12.350025] IPMI Watchdog: driver initialized
[ 12.354383] initcall ipmi_wdog_init+0x0/0x153 returned 0 after 0 usecs
[ 12.360006] calling ipmi_poweroff_init+0x0/0xb7 @ 1
[ 12.364969] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 12.370028] initcall ipmi_poweroff_init+0x0/0xb7 returned 0 after 9765 usecs
[ 12.380026] calling drm_core_init+0x0/0x145 @ 1
[ 12.384647] device class 'drm': registering
[ 12.390287] [drm] Initialized drm 1.1.0 20060810
[ 12.394903] initcall drm_core_init+0x0/0x145 returned 0 after 9765 usecs
[ 12.400005] calling mga_init+0x0/0x45 @ 1
[ 12.404137] initcall mga_init+0x0/0x45 returned 0 after 0 usecs
[ 12.410004] calling i810_init+0x0/0x45 @ 1
[ 12.414224] initcall i810_init+0x0/0x45 returned 0 after 0 usecs
[ 12.420004] calling sis_init+0x0/0x45 @ 1
[ 12.424179] initcall sis_init+0x0/0x45 returned 0 after 0 usecs
[ 12.430021] calling savage_init+0x0/0x45 @ 1
[ 12.434606] initcall savage_init+0x0/0x45 returned 0 after 0 usecs
[ 12.440026] calling via_init+0x0/0x4a @ 1
[ 12.444219] initcall via_init+0x0/0x4a returned 0 after 0 usecs
[ 12.450004] calling serial8250_init+0x0/0x16f @ 1
[ 12.454786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 12.460051] Registering platform device 'serial8250'. Parent at platform
[ 12.470005] device: 'serial8250': device_add
[ 12.474276] bus: 'platform': add device serial8250
[ 12.480304] async_waiting @ 1
[ 12.483281] async_continuing @ 1 after 0 usec
[ 12.620064] async_waiting @ 1
[ 12.623031] async_continuing @ 1 after 0 usec
�[ 12.760103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.766120] device: 'ttyS0': device_add
[ 12.770255] device: 'ttyS1': device_add
[ 12.774346] device: 'ttyS2': device_add
[ 12.778434] device: 'ttyS3': device_add
[ 12.780253] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 12.787549] bus: 'platform': add driver serial8250
[ 12.790015] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250
[ 12.800003] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[ 12.810011] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[ 12.817048] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[ 12.820248] initcall serial8250_init+0x0/0x16f returned 0 after 361328 usecs
[ 12.830029] calling jsm_init_module+0x0/0x6e @ 1
[ 12.834778] bus: 'pci': add driver jsm
[ 12.840253] initcall jsm_init_module+0x0/0x6e returned 0 after 9765 usecs
[ 12.847033] calling init_kgdboc+0x0/0x3b @ 1
[ 12.850006] initcall init_kgdboc+0x0/0x3b returned 0 after 0 usecs
[ 12.860004] calling parport_default_proc_register+0x0/0x42 @ 1
[ 12.865956] initcall parport_default_proc_register+0x0/0x42 returned 0 after 0 usecs
[ 12.870003] calling parport_pc_init+0x0/0x355 @ 1
[ 12.874789] bus: 'platform': add driver parport_pc
[ 12.880233] IT8712 SuperIO detected.
[ 12.884151] Registering platform device 'parport_pc.956'. Parent at platform
[ 12.890027] device: 'parport_pc.956': device_add
[ 12.894648] bus: 'platform': add device parport_pc.956
[ 12.900217] bus: 'platform': driver_probe_device: matched device parport_pc.956 with driver parport_pc
[ 12.910004] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.956
[ 12.920011] driver: 'parport_pc.956': driver_bound: bound to device 'parport_pc'
[ 12.930005] bus: 'platform': really_probe: bound device parport_pc.956 to driver parport_pc
[ 12.938429] bus: 'platform': remove device parport_pc.956
[ 12.940237] Registering platform device 'parport_pc.888'. Parent at platform
[ 12.950027] device: 'parport_pc.888': device_add
[ 12.954647] bus: 'platform': add device parport_pc.888
[ 12.960217] bus: 'platform': driver_probe_device: matched device parport_pc.888 with driver parport_pc
[ 12.970004] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.888
[ 12.978693] driver: 'parport_pc.888': driver_bound: bound to device 'parport_pc'
[ 12.980003] bus: 'platform': really_probe: bound device parport_pc.888 to driver parport_pc
[ 12.990053] parport0: PC-style at 0x378 (0x778)async_waiting @ 1
[ 13.000003] async_continuing @ 1 after 0 usec
[ 13.141034] [PCSPP,TRISTATE]
[ 13.144052] parport0: irq 7 detected
[ 13.220165] device: 'parport0': device_add
[ 13.224600] device: 'lp0': device_add
[ 13.228517] lp0: using parport0 (polling).
[ 13.230028] lp0: console ready
[ 13.233086] Registering platform device 'parport_pc.632'. Parent at platform
[ 13.240005] device: 'parport_pc.632': device_add
[ 13.244621] bus: 'platform': add device parport_pc.632
[ 13.250227] bus: 'platform': driver_probe_device: matched device parport_pc.632 with driver parport_pc
[ 13.260082] bus: 'platform': really_probe: probing driver parport_pc with device parport_pc.632
[ 13.270011] driver: 'parport_pc.632': driver_bound: bound to device 'parport_pc'
[ 13.277396] bus: 'platform': really_probe: bound device parport_pc.632 to driver parport_pc
[ 13.280073] bus: 'platform': remove device parport_pc.632
[ 13.290235] bus: 'pci': add driver parport_pc
[ 13.294830] initcall parport_pc_init+0x0/0x355 returned 0 after 410156 usecs
[ 13.300072] calling topology_sysfs_init+0x0/0x82 @ 1
[ 13.305154] initcall topology_sysfs_init+0x0/0x82 returned 0 after 0 usecs
[ 13.310004] calling floppy_init+0x0/0xe23 @ 1
[ 13.320089] Platform driver 'floppy' needs updating - please use dev_pm_ops
[ 13.327040] bus: 'platform': add driver floppy
[ 13.330346] Floppy drive(s): fd0 is 1.44M
[ 13.353888] FDC 0 is a post-1991 82077
[ 13.358610] Registering platform device 'floppy.0'. Parent at platform
[ 13.360022] device: 'floppy.0': device_add
[ 13.364131] bus: 'platform': add device floppy.0
[ 13.370229] bus: 'platform': driver_probe_device: matched device floppy.0 with driver floppy
[ 13.380005] bus: 'platform': really_probe: probing driver floppy with device floppy.0
[ 13.390011] driver: 'floppy.0': driver_bound: bound to device 'floppy'
[ 13.396528] bus: 'platform': really_probe: bound device floppy.0 to driver floppy
[ 13.400012] device: 'fd0': device_add
[ 13.404023] device: '2:0': device_add
[ 13.410281] initcall floppy_init+0x0/0xe23 returned 0 after 87890 usecs
[ 13.416885] calling loop_init+0x0/0x1bc @ 1
[ 13.420291] device: 'loop0': device_add
[ 13.424478] device: '7:0': device_add
[ 13.430289] device: 'loop1': device_add
[ 13.434513] device: '7:1': device_add
[ 13.438420] device: 'loop2': device_add
[ 13.440317] device: '7:2': device_add
[ 13.444257] device: 'loop3': device_add
[ 13.450344] device: '7:3': device_add
[ 13.454278] device: 'loop4': device_add
[ 13.460327] device: '7:4': device_add
[ 13.464225] device: 'loop5': device_add
[ 13.468373] device: '7:5': device_add
[ 13.470313] device: 'loop6': device_add
[ 13.474463] device: '7:6': device_add
[ 13.480406] device: 'loop7': device_add
[ 13.484580] device: '7:7': device_add
[ 13.488499] loop: module loaded
[ 13.490060] initcall loop_init+0x0/0x1bc returned 0 after 68359 usecs
[ 13.496494] calling cpqarray_init+0x0/0x2ba @ 1
[ 13.500003] Compaq SMART2 Driver (v 2.6.0)
[ 13.504097] bus: 'pci': add driver cpqarray
[ 13.510267] bus: 'pci': remove driver cpqarray
[ 13.514924] driver: 'cpqarray': driver_release
[ 13.520039] initcall cpqarray_init+0x0/0x2ba returned -19 after 19531 usecs
[ 13.526988] calling cciss_init+0x0/0x7a @ 1
[ 13.530006] HP CISS Driver (v 3.6.20)
[ 13.533907] bus: 'cciss': registered
[ 13.537481] bus: 'pci': add driver cciss
[ 13.540286] initcall cciss_init+0x0/0x7a returned 0 after 9765 usecs
[ 13.546635] calling DAC960_init_module+0x0/0x78 @ 1
[ 13.550022] bus: 'pci': add driver DAC960
[ 13.554272] device: 'dac960_gam': device_add
[ 13.560269] initcall DAC960_init_module+0x0/0x78 returned 0 after 9765 usecs
[ 13.570004] calling nbd_init+0x0/0x305 @ 1
[ 13.574962] nbd: registered device at major 43
[ 13.580017] device: 'nbd0': device_add
[ 13.584088] device: '43:0': device_add
[ 13.588076] device: 'nbd1': device_add
[ 13.590350] device: '43:1': device_add
[ 13.594362] device: 'nbd2': device_add
[ 13.600360] device: '43:2': device_add
[ 13.604370] device: 'nbd3': device_add
[ 13.608423] device: '43:3': device_add
[ 13.610309] device: 'nbd4': device_add
[ 13.614390] device: '43:4': device_add
[ 13.620243] device: 'nbd5': device_add
[ 13.624356] device: '43:5': device_add
[ 13.628339] device: 'nbd6': device_add
[ 13.630400] device: '43:6': device_add
[ 13.634399] device: 'nbd7': device_add
[ 13.640345] device: '43:7': device_add
[ 13.644381] device: 'nbd8': device_add
[ 13.648451] device: '43:8': device_add
[ 13.650295] device: 'nbd9': device_add
[ 13.654368] device: '43:9': device_add
[ 13.660259] device: 'nbd10': device_add
[ 13.664438] device: '43:10': device_add
[ 13.668513] device: 'nbd11': device_add
[ 13.670381] device: '43:11': device_add
[ 13.674452] device: 'nbd12': device_add
[ 13.680325] device: '43:12': device_add
[ 13.684445] device: 'nbd13': device_add
[ 13.690703] device: '43:13': device_add
[ 13.694776] device: 'nbd14': device_add
[ 13.698967] device: '43:14': device_add
[ 13.700273] device: 'nbd15': device_add
[ 13.704518] device: '43:15': device_add
[ 13.710264] initcall nbd_init+0x0/0x305 returned 0 after 136718 usecs
[ 13.716692] calling init_cryptoloop+0x0/0x55 @ 1
[ 13.720005] initcall init_cryptoloop+0x0/0x55 returned 0 after 0 usecs
[ 13.726519] calling ibmasm_init+0x0/0x8a @ 1
[ 13.730020] bus: 'pci': add driver ibmasm
[ 13.734266] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[ 13.740010] initcall ibmasm_init+0x0/0x8a returned 0 after 9765 usecs
[ 13.750003] calling ics932s401_init+0x0/0x3b @ 1
[ 13.754701] bus: 'i2c': add driver ics932s401
[ 13.760342] initcall ics932s401_init+0x0/0x3b returned 0 after 9765 usecs
[ 13.767121] calling tifm_7xx1_init+0x0/0x42 @ 1
[ 13.770003] bus: 'pci': add driver tifm_7xx1
[ 13.774495] initcall tifm_7xx1_init+0x0/0x42 returned 0 after 0 usecs
[ 13.780005] calling phantom_init+0x0/0x12f @ 1
[ 13.784527] device class 'phantom': registering
[ 13.790251] bus: 'pci': add driver phantom
[ 13.794592] Phantom Linux Driver, version n0.9.8, init OK
[ 13.800005] initcall phantom_init+0x0/0x12f returned 0 after 19531 usecs
[ 13.806703] calling ioc4_init+0x0/0x47 @ 1
[ 13.810004] bus: 'pci': add driver IOC4
[ 13.814066] initcall ioc4_init+0x0/0x47 returned 0 after 0 usecs
[ 13.820004] calling ilo_init+0x0/0xb8 @ 1
[ 13.824095] device class 'iLO': registering
[ 13.830230] bus: 'pci': add driver hpilo
[ 13.834403] initcall ilo_init+0x0/0xb8 returned 0 after 9765 usecs
[ 13.840005] calling c2port_init+0x0/0x77 @ 1
[ 13.844353] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 13.850004] device class 'c2port': registering
[ 13.854653] initcall c2port_init+0x0/0x77 returned 0 after 9765 usecs
[ 13.860005] calling duramar2150_c2port_init+0x0/0x97 @ 1
[ 13.865489] device: 'c2port0': device_add
[ 13.870286] c2port c2port0: C2 port uc added
[ 13.874553] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[ 13.880006] initcall duramar2150_c2port_init+0x0/0x97 returned 0 after 19531 usecs
[ 13.890004] calling at24_init+0x0/0x5d @ 1
[ 13.894183] bus: 'i2c': add driver at24
[ 13.900218] initcall at24_init+0x0/0x5d returned 0 after 9765 usecs
[ 13.906478] calling at25_init+0x0/0x39 @ 1
[ 13.910005] bus: 'spi': add driver at25
[ 13.914068] initcall at25_init+0x0/0x39 returned 0 after 0 usecs
[ 13.920004] calling eeprom_init+0x0/0x3b @ 1
[ 13.924355] bus: 'i2c': add driver eeprom
[ 13.930221] initcall eeprom_init+0x0/0x3b returned 0 after 9765 usecs
[ 13.936649] calling max6875_init+0x0/0x3b @ 1
[ 13.940004] bus: 'i2c': add driver max6875
[ 13.944328] initcall max6875_init+0x0/0x3b returned 0 after 0 usecs
[ 13.950004] calling cb710_init_module+0x0/0x42 @ 1
[ 13.954875] bus: 'pci': add driver cb710
[ 13.960243] initcall cb710_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 13.967196] calling pasic3_base_init+0x0/0x40 @ 1
[ 13.970006] bus: 'platform': add driver pasic3
[ 13.974735] bus: 'platform': remove driver pasic3
[ 13.980211] driver: 'pasic3': driver_release
[ 13.984481] initcall pasic3_base_init+0x0/0x40 returned -19 after 9765 usecs
[ 13.990004] calling ezx_pcap_init+0x0/0x39 @ 1
[ 13.994529] bus: 'spi': add driver ezx-pcap
[ 14.000221] initcall ezx_pcap_init+0x0/0x39 returned 0 after 9765 usecs
[ 14.006825] calling scsi_tgt_init+0x0/0xb1 @ 1
[ 14.010805] device: 'tgt': device_add
[ 14.014740] initcall scsi_tgt_init+0x0/0xb1 returned 0 after 0 usecs
[ 14.020005] calling raid_init+0x0/0x39 @ 1
[ 14.024179] device class 'raid_devices': registering
[ 14.030238] initcall raid_init+0x0/0x39 returned 0 after 9765 usecs
[ 14.040012] calling spi_transport_init+0x0/0x9f @ 1
[ 14.044984] device class 'spi_transport': registering
[ 14.050240] device class 'spi_host': registering
[ 14.055093] initcall spi_transport_init+0x0/0x9f returned 0 after 9765 usecs
[ 14.060005] calling fc_transport_init+0x0/0x73 @ 1
[ 14.064872] device class 'fc_host': registering
[ 14.070212] device class 'fc_vports': registering
[ 14.075112] device class 'fc_remote_ports': registering
[ 14.080259] device class 'fc_transport': registering
[ 14.085424] initcall fc_transport_init+0x0/0x73 returned 0 after 19531 usecs
[ 14.090004] calling iscsi_transport_init+0x0/0x173 @ 1
[ 14.100002] Loading iSCSI transport class v2.0-870.
[ 14.104874] device class 'iscsi_transport': registering
[ 14.110211] device class 'iscsi_endpoint': registering
[ 14.115545] device class 'iscsi_host': registering
[ 14.120292] device class 'iscsi_connection': registering
[ 14.125804] device class 'iscsi_session': registering
[ 14.130326] initcall iscsi_transport_init+0x0/0x173 returned 0 after 29296 usecs
[ 14.137714] calling sas_transport_init+0x0/0xe1 @ 1
[ 14.140004] device class 'sas_host': registering
[ 14.144883] device class 'sas_phy': registering
[ 14.150213] device class 'sas_port': registering
[ 14.155050] device class 'sas_device': registering
[ 14.160231] device class 'sas_end_device': registering
[ 14.165601] device class 'sas_expander': registering
[ 14.170215] initcall sas_transport_init+0x0/0xe1 returned 0 after 29296 usecs
[ 14.180005] calling sas_class_init+0x0/0x58 @ 1
[ 14.185105] initcall sas_class_init+0x0/0x58 returned 0 after 0 usecs
[ 14.190004] calling srp_transport_init+0x0/0x65 @ 1
[ 14.194959] device class 'srp_host': registering
[ 14.200216] device class 'srp_remote_ports': registering
[ 14.205760] initcall srp_transport_init+0x0/0x65 returned 0 after 9765 usecs
[ 14.210005] calling libfc_init+0x0/0x96 @ 1
[ 14.220974] initcall libfc_init+0x0/0x96 returned 0 after 9765 usecs
[ 14.227325] calling fcoe_init+0x0/0x1ab @ 1
[ 14.230260] initcall fcoe_init+0x0/0x1ab returned 0 after 0 usecs
[ 14.236345] calling fnic_init_module+0x0/0x20d @ 1
[ 14.240004] fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
[ 14.246678] bus: 'pci': add driver fnic
[ 14.250264] initcall fnic_init_module+0x0/0x20d returned 0 after 9765 usecs
[ 14.260010] calling BusLogic_init+0x0/0x1830 @ 1
[ 14.264807] initcall BusLogic_init+0x0/0x1830 returned 0 after 0 usecs
[ 14.270004] calling adpt_init+0x0/0xe95 @ 1
[ 14.274267] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 14.280002] Detecting Adaptec I2O RAID controllers...
[ 14.285060] initcall adpt_init+0x0/0xe95 returned -19 after 9765 usecs
[ 14.290006] calling arcmsr_module_init+0x0/0x47 @ 1
[ 14.294962] bus: 'pci': add driver arcmsr
[ 14.300267] initcall arcmsr_module_init+0x0/0x47 returned 0 after 9765 usecs
[ 14.307310] calling ahc_linux_init+0x0/0x8d @ 1
[ 14.310009] bus: 'pci': add driver aic7xxx
[ 14.314401] initcall ahc_linux_init+0x0/0x8d returned 0 after 0 usecs
[ 14.320004] calling ahd_linux_init+0x0/0xa7 @ 1
[ 14.324617] bus: 'pci': add driver aic79xx
[ 14.330254] initcall ahd_linux_init+0x0/0xa7 returned 0 after 9765 usecs
[ 14.340005] calling aac_init+0x0/0x95 @ 1
[ 14.344096] Adaptec aacraid driver 1.1-5[2461]-ms
[ 14.348800] bus: 'pci': add driver aacraid
[ 14.350259] initcall aac_init+0x0/0x95 returned 0 after 9765 usecs
[ 14.360005] calling init_this_scsi_driver+0x0/0x10c @ 1
[ 14.365676] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs
[ 14.370004] calling ips_module_init+0x0/0x3b7 @ 1
[ 14.374790] bus: 'pci': add driver ips
[ 14.380260] bus: 'pci': remove driver ips
[ 14.384468] driver: 'ips': driver_release
[ 14.390009] initcall ips_module_init+0x0/0x3b7 returned -19 after 19531 usecs
[ 14.397135] calling init_this_scsi_driver+0x0/0x10c @ 1
[ 14.400058] scsi: <fdomain> Detection failed (no card)
[ 14.405188] initcall init_this_scsi_driver+0x0/0x10c returned -19 after 0 usecs
[ 14.410004] calling qla1280_init+0x0/0x42 @ 1
[ 14.414443] bus: 'pci': add driver qla1280
[ 14.420234] initcall qla1280_init+0x0/0x42 returned 0 after 9765 usecs
[ 14.430028] calling qla2x00_module_init+0x0/0x152 @ 1
[ 14.435704] QLogic Fibre Channel HBA Driver: 8.03.01-k4
[ 14.440005] bus: 'pci': add driver qla2xxx
[ 14.444372] initcall qla2x00_module_init+0x0/0x152 returned 0 after 9765 usecs
[ 14.450005] calling dc395x_module_init+0x0/0x42 @ 1
[ 14.454970] bus: 'pci': add driver dc395x
[ 14.460235] initcall dc395x_module_init+0x0/0x42 returned 0 after 9765 usecs
[ 14.467275] calling dc390_module_init+0x0/0xbf @ 1
[ 14.470003] DC390: clustering now enabled by default. If you get problems load
[ 14.480002] with "disable_clustering=1" and report to maintainers
[ 14.486694] bus: 'pci': add driver tmscsim
[ 14.490236] initcall dc390_module_init+0x0/0xbf returned 0 after 19531 usecs
[ 14.497275] calling mraid_mm_init+0x0/0xa7 @ 1
[ 14.500004] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 14.510010] device: 'megadev0': device_add
[ 14.514341] initcall mraid_mm_init+0x0/0xa7 returned 0 after 9765 usecs
[ 14.520008] calling megaraid_init+0x0/0xbc @ 1
[ 14.524538] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 14.530006] bus: 'pci': add driver megaraid
[ 14.534429] initcall megaraid_init+0x0/0xbc returned 0 after 9765 usecs
[ 14.540005] calling megasas_init+0x0/0x180 @ 1
[ 14.544528] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 14.550014] bus: 'pci': add driver megaraid_sas
[ 14.554778] initcall megasas_init+0x0/0x180 returned 0 after 9765 usecs
[ 14.560005] calling _scsih_init+0x0/0x117 @ 1
[ 14.570003] mpt2sas version 01.100.03.00 loaded
[ 14.574556] device: 'mpt2ctl': device_add
[ 14.578801] bus: 'pci': add driver mpt2sas
[ 14.580275] initcall _scsih_init+0x0/0x117 returned 0 after 9765 usecs
[ 14.590004] calling inia100_init+0x0/0x42 @ 1
[ 14.594442] bus: 'pci': add driver inia100
[ 14.598768] initcall inia100_init+0x0/0x42 returned 0 after 0 usecs
[ 14.600005] calling tw_init+0x0/0x55 @ 1
[ 14.604007] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 14.610003] bus: 'pci': add driver 3w-xxxx
[ 14.620234] initcall tw_init+0x0/0x55 returned 0 after 19531 usecs
[ 14.626409] calling twa_init+0x0/0x55 @ 1
[ 14.630006] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
[ 14.637308] bus: 'pci': add driver 3w-9xxx
[ 14.640235] initcall twa_init+0x0/0x55 returned 0 after 9765 usecs
[ 14.646408] calling ppa_driver_init+0x0/0x4c @ 1
[ 14.650004] ppa: Version 2.07 (for Linux 2.4.x)
[ 14.660401] initcall ppa_driver_init+0x0/0x4c returned 0 after 9765 usecs
[ 14.667177] calling ipr_init+0x0/0x5c @ 1
[ 14.670003] ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
[ 14.677472] bus: 'pci': add driver ipr
[ 14.680237] initcall ipr_init+0x0/0x5c returned 0 after 9765 usecs
[ 14.686410] calling hptiop_module_init+0x0/0x5c @ 1
[ 14.690004] RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
[ 14.696000] bus: 'pci': add driver hptiop
[ 14.700247] initcall hptiop_module_init+0x0/0x5c returned 0 after 9765 usecs
[ 14.710005] calling stex_init+0x0/0x55 @ 1
[ 14.714179] stex: Promise SuperTrak EX Driver version: 4.6.0000.3
[ 14.720004] bus: 'pci': add driver stex
[ 14.724070] initcall stex_init+0x0/0x55 returned 0 after 9765 usecs
[ 14.730007] calling mvs_init+0x0/0x79 @ 1
[ 14.734124] bus: 'pci': add driver mvsas
[ 14.740230] initcall mvs_init+0x0/0x79 returned 0 after 9765 usecs
[ 14.746406] calling cxgb3i_init_module+0x0/0x5d @ 1
[ 14.750004] cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 14.755763] device: 'cxgb3i': device_add
[ 14.760229] iscsi: registered transport (cxgb3i)
[ 14.764858] initcall cxgb3i_init_module+0x0/0x5d returned 0 after 9765 usecs
[ 14.770005] calling init_sd+0x0/0x106 @ 1
[ 14.774124] device class 'scsi_disk': registering
[ 14.780221] bus: 'scsi': add driver sd
[ 14.784214] initcall init_sd+0x0/0x106 returned 0 after 9765 usecs
[ 14.790005] calling init_sr+0x0/0x6f @ 1
[ 14.794009] bus: 'scsi': add driver sr
[ 14.800331] initcall init_sr+0x0/0x6f returned 0 after 9765 usecs
[ 14.806414] calling init_sg+0x0/0x170 @ 1
[ 14.810006] device class 'scsi_generic': registering
[ 14.815284] initcall init_sg+0x0/0x170 returned 0 after 0 usecs
[ 14.820005] calling ahci_init+0x0/0x42 @ 1
[ 14.824184] bus: 'pci': add driver ahci
[ 14.830024] initcall ahci_init+0x0/0x42 returned 0 after 9765 usecs
[ 14.836285] calling k2_sata_init+0x0/0x42 @ 1
[ 14.840004] bus: 'pci': add driver sata_svw
[ 14.844415] initcall k2_sata_init+0x0/0x42 returned 0 after 0 usecs
[ 14.850005] calling piix_init+0x0/0x50 @ 1
[ 14.854183] bus: 'pci': add driver ata_piix
[ 14.860179] initcall piix_init+0x0/0x50 returned 0 after 9765 usecs
[ 14.866440] calling pdc_ata_init+0x0/0x42 @ 1
[ 14.870005] bus: 'pci': add driver sata_promise
[ 14.874793] initcall pdc_ata_init+0x0/0x42 returned 0 after 0 usecs
[ 14.880004] calling qs_ata_init+0x0/0x42 @ 1
[ 14.884357] bus: 'pci': add driver sata_qstor
[ 14.890250] initcall qs_ata_init+0x0/0x42 returned 0 after 9765 usecs
[ 14.896685] calling sil_init+0x0/0x42 @ 1
[ 14.900005] bus: 'pci': add driver sata_sil
[ 14.904436] initcall sil_init+0x0/0x42 returned 0 after 0 usecs
[ 14.910004] calling sil24_init+0x0/0x42 @ 1
[ 14.914267] bus: 'pci': add driver sata_sil24
[ 14.920239] initcall sil24_init+0x0/0x42 returned 0 after 9765 usecs
[ 14.926582] calling svia_init+0x0/0x42 @ 1
[ 14.930007] bus: 'pci': add driver sata_via
[ 14.934454] initcall svia_init+0x0/0x42 returned 0 after 0 usecs
[ 14.940004] calling sis_init+0x0/0x42 @ 1
[ 14.944097] bus: 'pci': add driver sata_sis
[ 14.950230] initcall sis_init+0x0/0x42 returned 0 after 9765 usecs
[ 14.956407] calling pdc_sata_init+0x0/0x42 @ 1
[ 14.960005] bus: 'pci': add driver sata_sx4
[ 14.964447] initcall pdc_sata_init+0x0/0x42 returned 0 after 0 usecs
[ 14.970004] calling nv_init+0x0/0x42 @ 1
[ 14.974010] bus: 'pci': add driver sata_nv
[ 14.980309] initcall nv_init+0x0/0x42 returned 0 after 9765 usecs
[ 14.986399] calling uli_init+0x0/0x42 @ 1
[ 14.990005] bus: 'pci': add driver sata_uli
[ 14.994411] initcall uli_init+0x0/0x42 returned 0 after 0 usecs
[ 15.000005] calling mv_init+0x0/0x6e @ 1
[ 15.004009] bus: 'pci': add driver sata_mv
[ 15.008395] bus: 'platform': add driver sata_mv
[ 15.010225] initcall mv_init+0x0/0x6e returned 0 after 9765 usecs
[ 15.020005] calling amd_init+0x0/0x42 @ 1
[ 15.024096] bus: 'pci': add driver pata_amd
[ 15.028292] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pata_amd
[ 15.030005] bus: 'pci': really_probe: probing driver pata_amd with device 0000:00:06.0
[ 15.040115] pata_amd 0000:00:06.0: version 0.4.1
[ 15.044825] pata_amd 0000:00:06.0: setting latency timer to 64
[ 15.050275] scsi0 : pata_amd
[ 15.054088] device: 'host0': device_add
[ 15.060017] device: 'host0': device_add
[ 15.064261] scsi1 : pata_amd
[ 15.070009] device: 'host1': device_add
[ 15.073859] device: 'host1': device_add
[ 15.077990] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 15.080004] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 15.280546] ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
[ 15.286804] ata1.00: 488397168 sectors, multi 1: LBA48
[ 15.290044] ata1: nv_mode_filter: 0x3f39f&0x3f07f->0x3f01f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
[ 15.370475] ata1.00: configured for UDMA/100
[ 15.384754] async_waiting @ 1360
[ 15.387981] async_continuing @ 1360 after 0 usec
[ 15.390285] scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
[ 15.400009] device: 'target0:0:0': device_add
[ 15.404376] device: '0:0:0:0': device_add
[ 15.408436] bus: 'scsi': add device 0:0:0:0
[ 15.410267] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
[ 15.420019] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
[ 15.427161] device: '0:0:0:0': device_add
[ 15.430402] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 15.440228] sd 0:0:0:0: [sda] Write Protect is off
[ 15.445012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.450106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.459143] device: 'sda': device_add
[ 15.460589] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 15.545548] device: 'sda1': device_add
[ 15.549369] device: 'sda2': device_add
[ 15.550125] device: 'sda3': device_add
[ 15.553952] device: 'sda5': device_add
[ 15.560067] device: 'sda6': device_add
[ 15.563871] device: 'sda7': device_add
[ 15.567682] device: 'sda8': device_add
[ 15.570083] device: 'sda9': device_add
[ 15.573891] device: 'sda10': device_add
[ 15.582455] device: '8:0': device_add
[ 15.586805] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.590029] driver: '0:0:0:0': driver_bound: bound to device 'sd'
[ 15.596113] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
[ 15.600009] device: '0:0:0:0': device_add
[ 15.604334] device: 'sg0': device_add
[ 15.610381] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.615766] device: '0:0:0:0': device_add
[ 15.620310] async_waiting @ 1360
[ 15.623540] async_continuing @ 1360 after 0 usec
[ 15.800299] ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
[ 15.806323] ata2: nv_mode_filter: 0x1f39f&0x707f->0x701f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
[ 15.860251] ata2.01: configured for UDMA/33
[ 15.875113] async_waiting @ 1360
[ 15.878342] async_continuing @ 1360 after 0 usec
[ 15.880431] scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
[ 15.890018] device: 'target1:0:1': device_add
[ 15.894387] device: '1:0:1:0': device_add
[ 15.898442] bus: 'scsi': add device 1:0:1:0
[ 15.911921] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sd
[ 15.919566] bus: 'scsi': really_probe: probing driver sd with device 1:0:1:0
[ 15.920033] bus: 'scsi': driver_probe_device: matched device 1:0:1:0 with driver sr
[ 15.930005] bus: 'scsi': really_probe: probing driver sr with device 1:0:1:0
[ 15.944171] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 15.950089] Uniform CD-ROM driver Revision: 3.20
[ 15.954799] device: 'sr0': device_add
[ 15.970664] device: '11:0': device_add
[ 15.974976] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 15.979590] driver: '1:0:1:0': driver_bound: bound to device 'sr'
[ 15.980030] bus: 'scsi': really_probe: bound device 1:0:1:0 to driver sr
[ 15.990008] device: '1:0:1:0': device_add
[ 15.994476] device: 'sg1': device_add
[ 16.011019] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 16.016337] device: '1:0:1:0': device_add
[ 16.032231] driver: '0000:00:06.0': driver_bound: bound to device 'pata_amd'
[ 16.039304] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pata_amd
[ 16.051101] initcall amd_init+0x0/0x42 returned 0 after 1005859 usecs
[ 16.057540] calling artop_init+0x0/0x42 @ 1
[ 16.060030] bus: 'pci': add driver pata_artop
[ 16.074802] initcall artop_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.080011] calling cmd640_init+0x0/0x42 @ 1
[ 16.084365] bus: 'pci': add driver pata_cmd640
[ 16.092518] initcall cmd640_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.098955] calling cmd64x_init+0x0/0x42 @ 1
[ 16.100009] bus: 'pci': add driver pata_cmd64x
[ 16.114910] initcall cmd64x_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.120008] calling cs5520_init+0x0/0x42 @ 1
[ 16.124366] bus: 'pci': add driver pata_cs5520
[ 16.141108] initcall cs5520_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.147629] calling cy82c693_init+0x0/0x42 @ 1
[ 16.150030] bus: 'pci': add driver pata_cypress
[ 16.165147] initcall cy82c693_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.170007] calling hpt36x_init+0x0/0x42 @ 1
[ 16.174365] bus: 'pci': add driver pata_hpt366
[ 16.190432] initcall hpt36x_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.196952] calling hpt37x_init+0x0/0x42 @ 1
[ 16.200007] bus: 'pci': add driver pata_hpt37x
[ 16.215004] initcall hpt37x_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.220007] calling hpt3x3_init+0x0/0x42 @ 1
[ 16.224365] bus: 'pci': add driver pata_hpt3x3
[ 16.242184] initcall hpt3x3_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.248706] calling it8213_init+0x0/0x42 @ 1
[ 16.250013] bus: 'pci': add driver pata_it8213
[ 16.264853] initcall it8213_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.270010] calling jmicron_init+0x0/0x42 @ 1
[ 16.274453] bus: 'pci': add driver pata_jmicron
[ 16.291973] initcall jmicron_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.298583] calling ninja32_init+0x0/0x42 @ 1
[ 16.300008] bus: 'pci': add driver pata_ninja32
[ 16.314946] initcall ninja32_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.320012] calling ns87410_init+0x0/0x42 @ 1
[ 16.324451] bus: 'pci': add driver pata_ns87410
[ 16.340961] initcall ns87410_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.347564] calling ns87415_init+0x0/0x42 @ 1
[ 16.350013] bus: 'pci': add driver pata_ns87415
[ 16.364940] initcall ns87415_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.370008] calling opti_init+0x0/0x42 @ 1
[ 16.374194] bus: 'pci': add driver pata_opti
[ 16.390368] initcall opti_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.396714] calling optidma_init+0x0/0x42 @ 1
[ 16.400009] bus: 'pci': add driver pata_optidma
[ 16.415069] initcall optidma_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.420029] calling marvell_init+0x0/0x42 @ 1
[ 16.424471] bus: 'pci': add driver pata_marvell
[ 16.441598] initcall marvell_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.448200] calling mpiix_init+0x0/0x42 @ 1
[ 16.450008] bus: 'pci': add driver pata_mpiix
[ 16.464783] initcall mpiix_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.470007] calling oldpiix_init+0x0/0x42 @ 1
[ 16.474451] bus: 'pci': add driver pata_oldpiix
[ 16.490954] initcall oldpiix_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.497558] calling pdc2027x_init+0x0/0x42 @ 1
[ 16.500008] bus: 'pci': add driver pata_pdc2027x
[ 16.515026] initcall pdc2027x_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.520029] calling pdc202xx_init+0x0/0x42 @ 1
[ 16.524558] bus: 'pci': add driver pata_pdc202xx_old
[ 16.540625] initcall pdc202xx_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.547322] calling sc1200_init+0x0/0x42 @ 1
[ 16.550012] bus: 'pci': add driver sc1200
[ 16.564438] initcall sc1200_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.570013] calling serverworks_init+0x0/0x42 @ 1
[ 16.574799] bus: 'pci': add driver pata_serverworks
[ 16.590974] initcall serverworks_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.597924] calling via_init+0x0/0x42 @ 1
[ 16.600009] bus: 'pci': add driver pata_via
[ 16.614600] initcall via_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.620029] calling sl82c105_init+0x0/0x42 @ 1
[ 16.624556] bus: 'pci': add driver pata_sl82c105
[ 16.641839] initcall sl82c105_init+0x0/0x42 returned 0 after 19531 usecs
[ 16.648529] calling sis_init+0x0/0x42 @ 1
[ 16.650009] bus: 'pci': add driver pata_sis
[ 16.664603] initcall sis_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.670008] calling triflex_init+0x0/0x42 @ 1
[ 16.674452] bus: 'pci': add driver pata_triflex
[ 16.689405] initcall triflex_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.690012] calling sch_init+0x0/0x42 @ 1
[ 16.700005] bus: 'pci': add driver pata_sch
[ 16.714591] initcall sch_init+0x0/0x42 returned 0 after 9765 usecs
[ 16.720012] calling pata_platform_init+0x0/0x39 @ 1
[ 16.724971] bus: 'platform': add driver pata_platform
[ 16.741084] initcall pata_platform_init+0x0/0x39 returned 0 after 19531 usecs
[ 16.748211] calling e1000_init_module+0x0/0xab @ 1
[ 16.750006] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 16.756442] Copyright (c) 1999-2006 Intel Corporation.
[ 16.760005] bus: 'pci': add driver e1000
[ 16.774336] initcall e1000_init_module+0x0/0xab returned 0 after 19531 usecs
[ 16.780008] calling e1000_init_module+0x0/0x8f @ 1
[ 16.784883] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 16.790003] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 16.795831] bus: 'pci': add driver e1000e
[ 16.810833] initcall e1000_init_module+0x0/0x8f returned 0 after 29296 usecs
[ 16.817873] calling igb_init_module+0x0/0x7b @ 1
[ 16.820009] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 16.826701] Copyright (c) 2007-2009 Intel Corporation.
[ 16.830009] bus: 'pci': add driver igb
[ 16.844353] initcall igb_init_module+0x0/0x7b returned 0 after 19531 usecs
[ 16.850006] calling ixgbe_init_module+0x0/0x7f @ 1
[ 16.854881] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.34-k2
[ 16.860003] ixgbe: Copyright (c) 1999-2009 Intel Corporation.
[ 16.865743] bus: 'pci': add driver ixgbe
[ 16.883031] initcall ixgbe_init_module+0x0/0x7f returned 0 after 29296 usecs
[ 16.890011] calling ixgb_init_module+0x0/0x71 @ 1
[ 16.894796] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 16.900002] Copyright (c) 1999-2008 Intel Corporation.
[ 16.905138] bus: 'pci': add driver ixgb
[ 16.921260] initcall ixgb_init_module+0x0/0x71 returned 0 after 29296 usecs
[ 16.928214] calling t1_init_module+0x0/0x42 @ 1
[ 16.930009] bus: 'pci': add driver cxgb
[ 16.944492] initcall t1_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 16.950006] calling cxgb3_init_module+0x0/0x47 @ 1
[ 16.954886] bus: 'pci': add driver cxgb3
[ 16.970473] initcall cxgb3_init_module+0x0/0x47 returned 0 after 19531 usecs
[ 16.977510] calling vcan_init_module+0x0/0x5c @ 1
[ 16.980008] vcan: Virtual CAN interface driver
[ 16.984454] initcall vcan_init_module+0x0/0x5c returned 0 after 0 usecs
[ 16.990004] calling can_dev_init+0x0/0x55 @ 1
[ 16.994443] CAN device driver interface
[ 17.000004] initcall can_dev_init+0x0/0x55 returned 0 after 9765 usecs
[ 17.006522] calling atl1_init_module+0x0/0x42 @ 1
[ 17.010027] bus: 'pci': add driver atl1
[ 17.024333] initcall atl1_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 17.030013] calling atl2_init_module+0x0/0x71 @ 1
[ 17.034798] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 17.040009] Copyright (c) 2007 Atheros Corporation.
[ 17.044884] bus: 'pci': add driver atl2
[ 17.061098] initcall atl2_init_module+0x0/0x71 returned 0 after 29296 usecs
[ 17.068049] calling atl1e_init_module+0x0/0x42 @ 1
[ 17.070005] bus: 'pci': add driver ATL1E
[ 17.084518] initcall atl1e_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 17.090008] calling bdx_module_init+0x0/0xb0 @ 1
[ 17.094709] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[ 17.100002] tehuti: Options: hw_csum
[ 17.103663] bus: 'pci': add driver tehuti
[ 17.118811] initcall bdx_module_init+0x0/0xb0 returned 0 after 19531 usecs
[ 17.120004] calling enic_init_module+0x0/0x5c @ 1
[ 17.130005] enic: Cisco 10G Ethernet Driver, ver 1.0.0.933
[ 17.135484] bus: 'pci': add driver enic
[ 17.149900] initcall enic_init_module+0x0/0x5c returned 0 after 9765 usecs
[ 17.150027] calling plip_init+0x0/0x84 @ 1
[ 17.160024] plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
[ 17.168031] device: 'plip0': device_add
[ 17.182739] NET3 PLIP version 2.4-parport gniibe@mri.co.jp
[ 17.188218] plip0: Parallel port at 0x378, not using IRQ.
[ 17.190006] initcall plip_init+0x0/0x84 returned 0 after 29296 usecs
[ 17.196348] calling happy_meal_probe+0x0/0x42 @ 1
[ 17.200006] bus: 'pci': add driver hme
[ 17.214277] initcall happy_meal_probe+0x0/0x42 returned 0 after 9765 usecs
[ 17.220008] calling gem_init+0x0/0x42 @ 1
[ 17.224104] bus: 'pci': add driver gem
[ 17.238427] initcall gem_init+0x0/0x42 returned 0 after 9765 usecs
[ 17.240009] calling cas_init+0x0/0x61 @ 1
[ 17.244106] bus: 'pci': add driver cassini
[ 17.261348] initcall cas_init+0x0/0x61 returned 0 after 19531 usecs
[ 17.267604] calling vortex_init+0x0/0xd8 @ 1
[ 17.270010] bus: 'pci': add driver 3c59x
[ 17.284526] initcall vortex_init+0x0/0xd8 returned 0 after 9765 usecs
[ 17.290026] calling typhoon_init+0x0/0x42 @ 1
[ 17.294470] bus: 'pci': add driver typhoon
[ 17.309213] initcall typhoon_init+0x0/0x42 returned 0 after 9765 usecs
[ 17.310004] calling ne2k_pci_init+0x0/0x42 @ 1
[ 17.320005] bus: 'pci': add driver ne2k-pci
[ 17.334753] initcall ne2k_pci_init+0x0/0x42 returned 0 after 9765 usecs
[ 17.340004] calling pcnet32_init_module+0x0/0x154 @ 1
[ 17.345135] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 17.350008] bus: 'pci': add driver pcnet32
[ 17.364651] initcall pcnet32_init_module+0x0/0x154 returned 0 after 19531 usecs
[ 17.370004] calling e100_init_module+0x0/0x81 @ 1
[ 17.374787] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 17.380006] e100: Copyright(c) 1999-2006 Intel Corporation
[ 17.385485] bus: 'pci': add driver e100
[ 17.401336] initcall e100_init_module+0x0/0x81 returned 0 after 29296 usecs
[ 17.408290] calling tlan_probe+0x0/0x108 @ 1
[ 17.410006] ThunderLAN driver v1.15a
[ 17.413577] bus: 'pci': add driver tlan
[ 17.430938] TLAN: 0 devices installed, PCI: 0 EISA: 0
[ 17.436101] bus: 'pci': remove driver tlan
[ 17.451223] driver: 'tlan': driver_release
[ 17.455321] initcall tlan_probe+0x0/0x108 returned -19 after 39062 usecs
[ 17.460004] calling smsc9420_init_module+0x0/0x64 @ 1
[ 17.465137] bus: 'pci': add driver smsc9420
[ 17.481487] initcall smsc9420_init_module+0x0/0x64 returned 0 after 19531 usecs
[ 17.488791] calling sis190_init_module+0x0/0x42 @ 1
[ 17.490011] bus: 'pci': add driver sis190
[ 17.504715] initcall sis190_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 17.510008] calling r6040_init+0x0/0x42 @ 1
[ 17.514278] bus: 'pci': add driver r6040
[ 17.530686] initcall r6040_init+0x0/0x42 returned 0 after 19531 usecs
[ 17.537117] calling yellowfin_init+0x0/0x42 @ 1
[ 17.540006] bus: 'pci': add driver yellowfin
[ 17.555044] initcall yellowfin_init+0x0/0x42 returned 0 after 9765 usecs
[ 17.560026] calling acenic_init+0x0/0x42 @ 1
[ 17.564384] bus: 'pci': add driver acenic
[ 17.581320] initcall acenic_init+0x0/0x42 returned 0 after 19531 usecs
[ 17.587843] calling ns83820_init+0x0/0x4e @ 1
[ 17.590003] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 17.596782] bus: 'pci': add driver ns83820
[ 17.612402] initcall ns83820_init+0x0/0x4e returned 0 after 19531 usecs
[ 17.619007] calling fealnx_init+0x0/0x42 @ 1
[ 17.620010] bus: 'pci': add driver fealnx
[ 17.634614] initcall fealnx_init+0x0/0x42 returned 0 after 9765 usecs
[ 17.640009] calling tg3_init+0x0/0x42 @ 1
[ 17.644106] bus: 'pci': add driver tg3
[ 17.658455] initcall tg3_init+0x0/0x42 returned 0 after 9765 usecs
[ 17.660005] calling bnx2x_init+0x0/0xa8 @ 1
[ 17.664387] bus: 'pci': add driver bnx2x
[ 17.670272] initcall bnx2x_init+0x0/0xa8 returned 0 after 9765 usecs
[ 17.676616] calling skge_init_module+0x0/0x42 @ 1
[ 17.680029] bus: 'pci': add driver skge
[ 17.694662] initcall skge_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 17.700022] calling sky2_init_module+0x0/0x4e @ 1
[ 17.704805] sky2 driver version 1.23
[ 17.708383] bus: 'pci': add driver sky2
[ 17.720697] initcall sky2_init_module+0x0/0x4e returned 0 after 19531 usecs
[ 17.727652] calling ks8851_init+0x0/0x39 @ 1
[ 17.730010] bus: 'spi': add driver ks8851
[ 17.744456] initcall ks8851_init+0x0/0x39 returned 0 after 9765 usecs
[ 17.750026] calling rhine_init+0x0/0x5e @ 1
[ 17.754296] bus: 'pci': add driver via-rhine
[ 17.769167] initcall rhine_init+0x0/0x5e returned 0 after 9765 usecs
[ 17.770005] calling velocity_init_module+0x0/0x42 @ 1
[ 17.780005] bus: 'pci': add driver via-velocity
[ 17.795092] initcall velocity_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 17.800004] calling starfire_init+0x0/0x42 @ 1
[ 17.804531] bus: 'pci': add driver starfire
[ 17.820968] initcall starfire_init+0x0/0x42 returned 0 after 19531 usecs
[ 17.827663] calling marvell_init+0x0/0x84 @ 1
[ 17.830029] bus: 'mdio_bus': add driver Marvell 88E1101
[ 17.845786] bus: 'mdio_bus': add driver Marvell 88E1112
[ 17.861869] bus: 'mdio_bus': add driver Marvell 88E1111
[ 17.867310] bus: 'mdio_bus': add driver Marvell 88E1118
[ 17.881776] bus: 'mdio_bus': add driver Marvell 88E1121R
[ 17.887311] bus: 'mdio_bus': add driver Marvell 88E1145
[ 17.900786] bus: 'mdio_bus': add driver Marvell 88E1240
[ 17.906235] initcall marvell_init+0x0/0x84 returned 0 after 68359 usecs
[ 17.910024] calling davicom_init+0x0/0x83 @ 1
[ 17.914466] bus: 'mdio_bus': add driver Davicom DM9161E
[ 17.930745] bus: 'mdio_bus': add driver Davicom DM9161A
[ 17.936187] bus: 'mdio_bus': add driver Davicom DM9131
[ 17.951200] initcall davicom_init+0x0/0x83 returned 0 after 39062 usecs
[ 17.957808] calling cicada_init+0x0/0x65 @ 1
[ 17.960025] bus: 'mdio_bus': add driver Cicada Cis8204
[ 17.975550] bus: 'mdio_bus': add driver Cicada Cis8201
[ 17.990396] initcall cicada_init+0x0/0x65 returned 0 after 29296 usecs
[ 17.996914] calling qs6612_init+0x0/0x39 @ 1
[ 18.000004] bus: 'mdio_bus': add driver QS6612
[ 18.014841] initcall qs6612_init+0x0/0x39 returned 0 after 9765 usecs
[ 18.020005] calling smsc_init+0x0/0xbf @ 1
[ 18.024183] bus: 'mdio_bus': add driver SMSC LAN83C185
[ 18.041405] bus: 'mdio_bus': add driver SMSC LAN8187
[ 18.046626] bus: 'mdio_bus': add driver SMSC LAN8700
[ 18.060595] bus: 'mdio_bus': add driver SMSC LAN911x Internal PHY
[ 18.066896] bus: 'mdio_bus': add driver SMSC LAN8710/LAN8720
[ 18.081363] initcall smsc_init+0x0/0xbf returned 0 after 58593 usecs
[ 18.087711] calling vsc82xx_init+0x0/0x65 @ 1
[ 18.090021] bus: 'mdio_bus': add driver Vitesse VSC8244
[ 18.105657] bus: 'mdio_bus': add driver Vitesse VSC8221
[ 18.120475] initcall vsc82xx_init+0x0/0x65 returned 0 after 29296 usecs
[ 18.127085] calling broadcom_init+0x0/0x125 @ 1
[ 18.130010] bus: 'mdio_bus': add driver Broadcom BCM5411
[ 18.145697] bus: 'mdio_bus': add driver Broadcom BCM5421
[ 18.160543] bus: 'mdio_bus': add driver Broadcom BCM5461
[ 18.166075] bus: 'mdio_bus': add driver Broadcom BCM5464
[ 18.181715] bus: 'mdio_bus': add driver Broadcom BCM5481
[ 18.187258] bus: 'mdio_bus': add driver Broadcom BCM5482
[ 18.201082] bus: 'mdio_bus': add driver Broadcom BCM50610
[ 18.206698] bus: 'mdio_bus': add driver Broadcom BCM57780
[ 18.221151] initcall broadcom_init+0x0/0x125 returned 0 after 87890 usecs
[ 18.227927] calling ip175c_init+0x0/0x39 @ 1
[ 18.230023] bus: 'mdio_bus': add driver ICPlus IP175C
[ 18.245650] initcall ip175c_init+0x0/0x39 returned 0 after 9765 usecs
[ 18.250026] calling et1011c_init+0x0/0x39 @ 1
[ 18.254468] bus: 'mdio_bus': add driver ET1011C
[ 18.271408] initcall et1011c_init+0x0/0x39 returned 0 after 19531 usecs
[ 18.278019] calling fixed_mdio_bus_init+0x0/0xf6 @ 1
[ 18.280009] Registering platform device 'Fixed MDIO bus.0'. Parent at platform
[ 18.290005] device: 'Fixed MDIO bus.0': device_add
[ 18.294798] bus: 'platform': add device Fixed MDIO bus.0
[ 18.311411] device: '0': device_add
[ 18.315178] Fixed MDIO Bus: probed
[ 18.318580] initcall fixed_mdio_bus_init+0x0/0xf6 returned 0 after 29296 usecs
[ 18.320032] calling ns_init+0x0/0x39 @ 1
[ 18.324043] bus: 'mdio_bus': add driver NatSemi DP83865
[ 18.341561] initcall ns_init+0x0/0x39 returned 0 after 19531 usecs
[ 18.347733] calling ste10Xp_init+0x0/0x49 @ 1
[ 18.350023] bus: 'mdio_bus': add driver STe100p
[ 18.364935] bus: 'mdio_bus': add driver STe101p
[ 18.369677] initcall ste10Xp_init+0x0/0x49 returned 0 after 9765 usecs
[ 18.370027] calling sundance_init+0x0/0x42 @ 1
[ 18.380011] bus: 'pci': add driver sundance
[ 18.394811] initcall sundance_init+0x0/0x42 returned 0 after 9765 usecs
[ 18.400022] calling hamachi_init+0x0/0x42 @ 1
[ 18.404462] bus: 'pci': add driver hamachi
[ 18.410236] initcall hamachi_init+0x0/0x42 returned 0 after 9765 usecs
[ 18.416754] calling net_olddevs_init+0x0/0xc7 @ 1
[ 18.420040] D-Link DE-620 pocket adapter io 0x378, which is busy.
[ 18.426159] initcall net_olddevs_init+0x0/0xc7 returned 0 after 0 usecs
[ 18.430011] calling hp100_module_init+0x0/0x42 @ 1
[ 18.434888] bus: 'pci': add driver hp100
[ 18.450854] initcall hp100_module_init+0x0/0x42 returned 0 after 19531 usecs
[ 18.457894] calling b44_init+0x0/0x89 @ 1
[ 18.460030] bus: 'pci': add driver b44
[ 18.474362] bus: 'ssb': add driver b44
[ 18.478337] initcall b44_init+0x0/0x89 returned 0 after 9765 usecs
[ 18.480027] calling init_nic+0x0/0x42 @ 1
[ 18.484123] bus: 'pci': add driver forcedeth
[ 18.490024] bus: 'pci': driver_probe_device: matched device 0000:00:0a.0 with driver forcedeth
[ 18.500003] bus: 'pci': really_probe: probing driver forcedeth with device 0000:00:0a.0
[ 18.508124] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 18.510134] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:1)
[ 18.520009] forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 18.530008] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 18.535986] nv_probe: set workaround bit for reversed mac addr
[ 19.070247] device: 'eth0': device_add
[ 19.075056] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
[ 19.080031] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 19.086409] driver: '0000:00:0a.0': driver_bound: bound to device 'forcedeth'
[ 19.090071] bus: 'pci': really_probe: bound device 0000:00:0a.0 to driver forcedeth
[ 19.110984] initcall init_nic+0x0/0x42 returned 0 after 615234 usecs
[ 19.117330] calling ql3xxx_init_module+0x0/0x42 @ 1
[ 19.120037] bus: 'pci': add driver qla3xxx
[ 19.134597] initcall ql3xxx_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 19.140022] calling qlge_init_module+0x0/0x42 @ 1
[ 19.144809] bus: 'pci': add driver qlge
[ 19.162653] initcall qlge_init_module+0x0/0x42 returned 0 after 19531 usecs
[ 19.169606] calling ppp_init+0x0/0x104 @ 1
[ 19.170002] PPP generic driver version 2.4.2
[ 19.174346] device class 'ppp': registering
[ 19.190604] device: 'ppp': device_add
[ 19.194545] initcall ppp_init+0x0/0x104 returned 0 after 19531 usecs
[ 19.200028] calling ppp_sync_init+0x0/0x5c @ 1
[ 19.204555] initcall ppp_sync_init+0x0/0x5c returned 0 after 0 usecs
[ 19.210008] calling deflate_init+0x0/0x61 @ 1
[ 19.214463] PPP Deflate Compression module registered
[ 19.220006] initcall deflate_init+0x0/0x61 returned 0 after 9765 usecs
[ 19.226521] calling bsdcomp_init+0x0/0x55 @ 1
[ 19.230006] PPP BSD Compression module registered
[ 19.234704] initcall bsdcomp_init+0x0/0x55 returned 0 after 0 usecs
[ 19.240020] calling ppp_mppe_init+0x0/0x10d @ 1
[ 19.255352] PPP MPPE Compression module registered
[ 19.260025] initcall ppp_mppe_init+0x0/0x10d returned 0 after 19531 usecs
[ 19.266808] calling pppox_init+0x0/0x39 @ 1
[ 19.270003] NET: Registered protocol family 24
[ 19.274443] initcall pppox_init+0x0/0x39 returned 0 after 0 usecs
[ 19.280004] calling pppoe_init+0x0/0xaf @ 1
[ 19.284295] initcall pppoe_init+0x0/0xaf returned 0 after 0 usecs
[ 19.290004] calling pppol2tp_init+0x0/0xa8 @ 1
[ 19.294540] PPPoL2TP kernel driver, V1.0
[ 19.300020] initcall pppol2tp_init+0x0/0xa8 returned 0 after 9765 usecs
[ 19.306624] calling slip_init+0x0/0xe6 @ 1
[ 19.310003] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 19.320002] CSLIP: code copyright 1989 Regents of the University of California.
[ 19.327299] SLIP linefill/keepalive option.
[ 19.330057] initcall slip_init+0x0/0xe6 returned 0 after 19531 usecs
[ 19.336401] calling macvlan_init_module+0x0/0x79 @ 1
[ 19.340022] initcall macvlan_init_module+0x0/0x79 returned 0 after 0 usecs
[ 19.350004] calling de600_init+0x0/0x2f2 @ 1
[ 19.354370] DE600: port 0x378 busy
[ 19.357776] initcall de600_init+0x0/0x2f2 returned -16 after 0 usecs
[ 19.360004] initcall de600_init+0x0/0x2f2 returned with error code -16
[ 19.370008] calling cp_init+0x0/0x42 @ 1
[ 19.374025] bus: 'pci': add driver 8139cp
[ 19.378069] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139cp
[ 19.380018] bus: 'pci': really_probe: probing driver 8139cp with device 0000:05:07.0
[ 19.390120] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 19.400026] 8139cp 0000:05:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 19.410302] initcall cp_init+0x0/0x42 returned 0 after 39062 usecs
[ 19.416479] calling rtl8139_init_module+0x0/0x42 @ 1
[ 19.420028] bus: 'pci': add driver 8139too
[ 19.424147] bus: 'pci': driver_probe_device: matched device 0000:05:07.0 with driver 8139too
[ 19.430006] bus: 'pci': really_probe: probing driver 8139too with device 0000:05:07.0
[ 19.440102] 8139too Fast Ethernet driver 0.9.28
[ 19.444662] 8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 11
[ 19.450412] device: 'eth1': device_add
[ 19.460574] eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 11
[ 19.467124] driver: '0000:05:07.0': driver_bound: bound to device '8139too'
[ 19.470071] bus: 'pci': really_probe: bound device 0000:05:07.0 to driver 8139too
[ 19.491790] initcall rtl8139_init_module+0x0/0x42 returned 0 after 68359 usecs
[ 19.499002] calling atp_init_module+0x0/0xbf @ 1
[ 19.500030] atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@scyld.com>
[ 19.510035] initcall atp_init_module+0x0/0xbf returned -19 after 9765 usecs
[ 19.516988] calling sc92031_init+0x0/0x42 @ 1
[ 19.520009] bus: 'pci': add driver sc92031
[ 19.534723] initcall sc92031_init+0x0/0x42 returned 0 after 9765 usecs
[ 19.540022] calling eql_init_module+0x0/0x89 @ 1
[ 19.544718] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 19.550021] device: 'eql': device_add
[ 19.564971] initcall eql_init_module+0x0/0x89 returned 0 after 19531 usecs
[ 19.570004] calling tun_init+0x0/0xb7 @ 1
[ 19.574094] tun: Universal TUN/TAP device driver, 1.6
[ 19.580003] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 19.586182] device: 'tun': device_add
[ 19.601596] initcall tun_init+0x0/0xb7 returned 0 after 29296 usecs
[ 19.607855] calling veth_init+0x0/0x39 @ 1
[ 19.610008] initcall veth_init+0x0/0x39 returned 0 after 0 usecs
[ 19.616011] calling rio_init+0x0/0x42 @ 1
[ 19.620007] bus: 'pci': add driver dl2k
[ 19.634361] initcall rio_init+0x0/0x42 returned 0 after 9765 usecs
[ 19.640005] calling rtl8169_init_module+0x0/0x42 @ 1
[ 19.645051] bus: 'pci': add driver r8169
[ 19.659473] initcall rtl8169_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 19.660004] calling amd8111e_init+0x0/0x42 @ 1
[ 19.670006] bus: 'pci': add driver amd8111e
[ 19.684813] initcall amd8111e_init+0x0/0x42 returned 0 after 9765 usecs
[ 19.690004] calling myri10ge_init_module+0x0/0x99 @ 1
[ 19.695135] myri10ge: Version 1.5.0-1.418
[ 19.700006] bus: 'pci': add driver myri10ge
[ 19.714774] initcall myri10ge_init_module+0x0/0x99 returned 0 after 19531 usecs
[ 19.720010] calling mlx4_init+0x0/0xcb @ 1
[ 19.725249] bus: 'pci': add driver mlx4_core
[ 19.742084] initcall mlx4_init+0x0/0xcb returned 0 after 19531 usecs
[ 19.748434] calling mlx4_en_init+0x0/0x39 @ 1
[ 19.750045] initcall mlx4_en_init+0x0/0x39 returned 0 after 0 usecs
[ 19.756304] calling enc28j60_init+0x0/0x4a @ 1
[ 19.760005] bus: 'spi': add driver enc28j60
[ 19.774953] initcall enc28j60_init+0x0/0x4a returned 0 after 9765 usecs
[ 19.780004] calling ethoc_init+0x0/0x39 @ 1
[ 19.784270] bus: 'platform': add driver ethoc
[ 19.800902] initcall ethoc_init+0x0/0x39 returned 0 after 19531 usecs
[ 19.807333] calling dnet_init+0x0/0x39 @ 1
[ 19.810004] bus: 'platform': add driver dnet
[ 19.824913] initcall dnet_init+0x0/0x39 returned 0 after 9765 usecs
[ 19.830010] calling hdlc_module_init+0x0/0x66 @ 1
[ 19.834795] HDLC support module revision 1.22
[ 19.840009] initcall hdlc_module_init+0x0/0x66 returned 0 after 9765 usecs
[ 19.846874] calling mod_init+0x0/0x3b @ 1
[ 19.850005] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[ 19.855916] calling mod_init+0x0/0x3b @ 1
[ 19.860005] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[ 19.865914] calling mod_init+0x0/0x3b @ 1
[ 19.870027] initcall mod_init+0x0/0x3b returned 0 after 0 usecs
[ 19.875941] calling fst_init+0x0/0x76 @ 1
[ 19.880008] bus: 'pci': add driver fst
[ 19.894429] initcall fst_init+0x0/0x76 returned 0 after 9765 usecs
[ 19.900005] calling pci200_init_module+0x0/0x69 @ 1
[ 19.904970] bus: 'pci': add driver PCI200SYN
[ 19.921761] initcall pci200_init_module+0x0/0x69 returned 0 after 19531 usecs
[ 19.928890] calling pc300_init_module+0x0/0x8c @ 1
[ 19.930014] bus: 'pci': add driver PC300
[ 19.944445] initcall pc300_init_module+0x0/0x8c returned 0 after 9765 usecs
[ 19.950008] calling arcnet_init+0x0/0x84 @ 1
[ 19.954364] arcnet loaded.
[ 19.957074] initcall arcnet_init+0x0/0x84 returned 0 after 0 usecs
[ 19.960003] calling arcnet_rfc1201_init+0x0/0x98 @ 1
[ 19.965047] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[ 19.970003] initcall arcnet_rfc1201_init+0x0/0x98 returned 0 after 9765 usecs
[ 19.980003] calling arcnet_raw_init+0x0/0x80 @ 1
[ 19.984700] arcnet: raw mode (`r') encapsulation support loaded.
[ 19.990026] initcall arcnet_raw_init+0x0/0x80 returned 0 after 9765 usecs
[ 20.000003] calling com90io_init+0x0/0x4d4 @ 1
[ 20.004567] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[ 20.010002] E-mail me if you actually test this driver, please!
[ 20.015913] arc%d: No autoprobe for IO mapped cards; you must specify the base address!
[ 20.020023] initcall com90io_init+0x0/0x4d4 returned -19 after 19531 usecs
[ 20.030021] calling arc_rimi_init+0x0/0x4f2 @ 1
[ 20.034666] arcnet: RIM I (entirely mem-mapped) support
[ 20.040011] E-mail me if you actually test the RIM I driver, please!
[ 20.050003] arc%d: Given: node 00h, shmem 0h, irq 0
[ 20.054962] arc%d: No autoprobe for RIM I; you must specify the shmem and irq!
[ 20.060022] initcall arc_rimi_init+0x0/0x4f2 returned -5 after 29296 usecs
[ 20.066885] initcall arc_rimi_init+0x0/0x4f2 returned with error code -5
[ 20.070019] calling com20020pci_init+0x0/0x57 @ 1
[ 20.080002] arcnet: COM20020 PCI support
[ 20.083925] bus: 'pci': add driver com20020
[ 20.098694] initcall com20020pci_init+0x0/0x57 returned 0 after 9765 usecs
[ 20.100009] calling catc_init+0x0/0x5e @ 1
[ 20.104192] bus: 'usb': add driver catc
[ 20.121196] usbcore: registered new interface driver catc
[ 20.126594] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 20.130006] initcall catc_init+0x0/0x5e returned 0 after 29296 usecs
[ 20.136356] calling kaweth_init+0x0/0x42 @ 1
[ 20.140003] bus: 'usb': add driver kaweth
[ 20.154771] usbcore: registered new interface driver kaweth
[ 20.160008] initcall kaweth_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.166530] calling pegasus_init+0x0/0x18d @ 1
[ 20.170003] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 20.177474] bus: 'usb': add driver pegasus
[ 20.191608] usbcore: registered new interface driver pegasus
[ 20.197272] initcall pegasus_init+0x0/0x18d returned 0 after 19531 usecs
[ 20.200004] calling usb_rtl8150_init+0x0/0x4e @ 1
[ 20.204787] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 20.210003] bus: 'usb': add driver rtl8150
[ 20.224668] usbcore: registered new interface driver rtl8150
[ 20.230010] initcall usb_rtl8150_init+0x0/0x4e returned 0 after 29296 usecs
[ 20.236961] calling hso_init+0x0/0x1ce @ 1
[ 20.240003] hso: drivers/net/usb/hso.c: 1.2 Option Wireless
[ 20.245595] bus: 'usb': add driver hso
[ 20.261984] usbcore: registered new interface driver hso
[ 20.267296] initcall hso_init+0x0/0x1ce returned 0 after 19531 usecs
[ 20.270004] calling asix_init+0x0/0x42 @ 1
[ 20.274182] bus: 'usb': add driver asix
[ 20.290989] usbcore: registered new interface driver asix
[ 20.296391] initcall asix_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.300003] calling cdc_init+0x0/0x42 @ 1
[ 20.304097] bus: 'usb': add driver cdc_ether
[ 20.322061] usbcore: registered new interface driver cdc_ether
[ 20.327893] initcall cdc_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.330006] calling eem_init+0x0/0x42 @ 1
[ 20.334097] bus: 'usb': add driver cdc_eem
[ 20.352334] usbcore: registered new interface driver cdc_eem
[ 20.357999] initcall eem_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.360004] calling dm9601_init+0x0/0x42 @ 1
[ 20.364354] bus: 'usb': add driver dm9601
[ 20.381143] usbcore: registered new interface driver dm9601
[ 20.386713] initcall dm9601_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.390004] calling smsc95xx_init+0x0/0x42 @ 1
[ 20.394529] bus: 'usb': add driver smsc95xx
[ 20.410891] usbcore: registered new interface driver smsc95xx
[ 20.416637] initcall smsc95xx_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.420004] calling usbnet_init+0x0/0x42 @ 1
[ 20.424354] bus: 'usb': add driver gl620a
[ 20.441793] usbcore: registered new interface driver gl620a
[ 20.447361] initcall usbnet_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.450004] calling net1080_init+0x0/0x42 @ 1
[ 20.454441] bus: 'usb': add driver net1080
[ 20.471106] usbcore: registered new interface driver net1080
[ 20.476767] initcall net1080_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.480004] calling plusb_init+0x0/0x42 @ 1
[ 20.484268] bus: 'usb': add driver plusb
[ 20.501569] usbcore: registered new interface driver plusb
[ 20.507056] initcall plusb_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.510004] calling rndis_init+0x0/0x42 @ 1
[ 20.514269] bus: 'usb': add driver rndis_host
[ 20.530631] usbcore: registered new interface driver rndis_host
[ 20.536549] initcall rndis_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.540004] calling cdc_subset_init+0x0/0x42 @ 1
[ 20.544701] bus: 'usb': add driver cdc_subset
[ 20.560807] usbcore: registered new interface driver cdc_subset
[ 20.566726] initcall cdc_subset_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.570004] calling zaurus_init+0x0/0x42 @ 1
[ 20.574354] bus: 'usb': add driver zaurus
[ 20.591559] usbcore: registered new interface driver zaurus
[ 20.597128] initcall zaurus_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.600004] calling mcs7830_init+0x0/0x42 @ 1
[ 20.604443] bus: 'usb': add driver MOSCHIP usb-ethernet driver
[ 20.622315] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 20.629704] initcall mcs7830_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.630006] calling usbnet_init+0x0/0x52 @ 1
[ 20.640009] initcall usbnet_init+0x0/0x52 returned 0 after 0 usecs
[ 20.646182] calling int51x1_init+0x0/0x42 @ 1
[ 20.650003] bus: 'usb': add driver int51x1
[ 20.664849] usbcore: registered new interface driver int51x1
[ 20.670011] initcall int51x1_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.676616] calling usbpn_init+0x0/0x42 @ 1
[ 20.680004] bus: 'usb': add driver cdc_phonet
[ 20.695108] usbcore: registered new interface driver cdc_phonet
[ 20.700008] initcall usbpn_init+0x0/0x42 returned 0 after 19531 usecs
[ 20.706443] calling ipw2100_init+0x0/0x93 @ 1
[ 20.710003] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 20.716778] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 20.720009] bus: 'pci': add driver ipw2100
[ 20.724349] initcall ipw2100_init+0x0/0x93 returned 0 after 9765 usecs
[ 20.730028] calling ipw_init+0x0/0xad @ 1
[ 20.734120] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdq
[ 20.740002] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 20.750006] bus: 'pci': add driver ipw2200
[ 20.754387] initcall ipw_init+0x0/0xad returned 0 after 19531 usecs
[ 20.760005] calling ieee80211_init+0x0/0x49 @ 1
[ 20.764615] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 20.770002] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 20.780004] initcall ieee80211_init+0x0/0x49 returned 0 after 19531 usecs
[ 20.786782] calling strip_init_driver+0x0/0x8e @ 1
[ 20.790002] STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
[ 20.800042] initcall strip_init_driver+0x0/0x8e returned 0 after 9765 usecs
[ 20.806996] calling init_orinoco+0x0/0x42 @ 1
[ 20.810003] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 20.820003] initcall init_orinoco+0x0/0x42 returned 0 after 9765 usecs
[ 20.826521] calling orinoco_pci_init+0x0/0x55 @ 1
[ 20.830005] orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
[ 20.840021] bus: 'pci': add driver orinoco_pci
[ 20.850237] initcall orinoco_pci_init+0x0/0x55 returned 0 after 19531 usecs
[ 20.857188] calling airo_init_module+0x0/0x110 @ 1
[ 20.860018] airo(): Probing for PCI adapters
[ 20.864288] bus: 'pci': add driver airo
[ 20.870251] airo(): Finished probing for PCI adapters
[ 20.875301] initcall airo_init_module+0x0/0x110 returned 0 after 9765 usecs
[ 20.880005] calling prism54_module_init+0x0/0x5c @ 1
[ 20.885047] Loaded prism54 driver, version 1.2
[ 20.890006] bus: 'pci': add driver prism54
[ 20.894333] initcall prism54_module_init+0x0/0x5c returned 0 after 9765 usecs
[ 20.900005] calling rtl8180_init+0x0/0x42 @ 1
[ 20.904442] bus: 'pci': add driver rtl8180
[ 20.910238] initcall rtl8180_init+0x0/0x42 returned 0 after 9765 usecs
[ 20.916755] calling rtl8187_init+0x0/0x42 @ 1
[ 20.920006] bus: 'usb': add driver rtl8187
[ 20.924321] usbcore: registered new interface driver rtl8187
[ 20.930014] initcall rtl8187_init+0x0/0x42 returned 0 after 9765 usecs
[ 20.936537] calling rndis_wlan_init+0x0/0x42 @ 1
[ 20.940004] bus: 'usb': add driver rndis_wlan
[ 20.944565] usbcore: registered new interface driver rndis_wlan
[ 20.950009] initcall rndis_wlan_init+0x0/0x42 returned 0 after 9765 usecs
[ 20.960004] calling zd1201_init+0x0/0x42 @ 1
[ 20.964354] bus: 'usb': add driver zd1201
[ 20.970265] usbcore: registered new interface driver zd1201
[ 20.975832] initcall zd1201_init+0x0/0x42 returned 0 after 9765 usecs
[ 20.980005] calling lbs_init_module+0x0/0x5d @ 1
[ 20.984728] initcall lbs_init_module+0x0/0x5d returned 0 after 0 usecs
[ 20.990004] calling if_spi_init_module+0x0/0x45 @ 1
[ 20.994960] libertas_spi: Libertas SPI driver
[ 21.000004] bus: 'spi': add driver libertas_spi
[ 21.004735] initcall if_spi_init_module+0x0/0x45 returned 0 after 9765 usecs
[ 21.010005] calling lbtf_init_module+0x0/0x6c @ 1
[ 21.014985] initcall lbtf_init_module+0x0/0x6c returned 0 after 0 usecs
[ 21.020004] calling if_usb_init_module+0x0/0x42 @ 1
[ 21.030006] bus: 'usb': add driver lbtf_usb
[ 21.034401] usbcore: registered new interface driver lbtf_usb
[ 21.040015] initcall if_usb_init_module+0x0/0x42 returned 0 after 9765 usecs
[ 21.047056] calling adm8211_init+0x0/0x42 @ 1
[ 21.050008] bus: 'pci': add driver adm8211
[ 21.054346] initcall adm8211_init+0x0/0x42 returned 0 after 0 usecs
[ 21.060005] calling iwl3945_init+0x0/0x9a @ 1
[ 21.064441] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kd
[ 21.070002] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 21.080008] bus: 'pci': add driver iwl3945
[ 21.084341] initcall iwl3945_init+0x0/0x9a returned 0 after 19531 usecs
[ 21.090005] calling p54p_init+0x0/0x42 @ 1
[ 21.094185] bus: 'pci': add driver p54pci
[ 21.100251] initcall p54p_init+0x0/0x42 returned 0 after 9765 usecs
[ 21.106511] calling p54spi_init+0x0/0x57 @ 1
[ 21.110005] bus: 'spi': add driver cx3110x
[ 21.114324] initcall p54spi_init+0x0/0x57 returned 0 after 0 usecs
[ 21.120004] calling ar9170_init+0x0/0x42 @ 1
[ 21.124356] bus: 'usb': add driver ar9170usb
[ 21.130218] usbcore: registered new interface driver ar9170usb
[ 21.136047] initcall ar9170_init+0x0/0x42 returned 0 after 9765 usecs
[ 21.140005] calling init_mac80211_hwsim+0x0/0x535 @ 1
[ 21.145134] device class 'mac80211_hwsim': registering
[ 21.150219] mac80211_hwsim: Initializing radio 0
[ 21.154897] device: 'hwsim0': device_add
[ 21.160325] device: 'phy0': device_add
[ 21.164316] device: 'rfkill0': device_add
[ 21.170892] device: 'wmaster0': device_add
[ 21.176092] phy0: Selected rate control algorithm 'pid'
[ 21.180181] device: 'wlan0': device_add
[ 21.185107] phy0: hwaddr 02:00:00:00:00:00 registered
[ 21.190034] mac80211_hwsim: Initializing radio 1
[ 21.194744] device: 'hwsim1': device_add
[ 21.200224] device: 'phy1': device_add
[ 21.204227] device: 'rfkill1': device_add
[ 21.210790] device: 'wmaster1': device_add
[ 21.216080] phy1: Selected rate control algorithm 'pid'
[ 21.220183] device: 'wlan1': device_add
[ 21.225221] phy1: hwaddr 02:00:00:00:01:00 registered
[ 21.230063] device: 'hwsim0': device_add
[ 21.235088] initcall init_mac80211_hwsim+0x0/0x535 returned 0 after 87890 usecs
[ 21.240005] calling wl12xx_init+0x0/0x57 @ 1
[ 21.244364] bus: 'spi': add driver wl12xx
[ 21.250221] initcall wl12xx_init+0x0/0x57 returned 0 after 9765 usecs
[ 21.256651] calling iwm_sdio_init_module+0x0/0x39 @ 1
[ 21.260005] bus: 'sdio': add driver iwm_sdio
[ 21.264505] initcall iwm_sdio_init_module+0x0/0x39 returned 0 after 0 usecs
[ 21.270004] calling dmfe_init_module+0x0/0x10f @ 1
[ 21.280002] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
[ 21.286707] bus: 'pci': add driver dmfe
[ 21.290272] initcall dmfe_init_module+0x0/0x10f returned 0 after 9765 usecs
[ 21.297223] calling de_init+0x0/0x42 @ 1
[ 21.300029] bus: 'pci': add driver de2104x
[ 21.304382] initcall de_init+0x0/0x42 returned 0 after 0 usecs
[ 21.310004] calling tulip_init+0x0/0x5a @ 1
[ 21.314269] bus: 'pci': add driver tulip
[ 21.320282] initcall tulip_init+0x0/0x5a returned 0 after 9765 usecs
[ 21.326625] calling de4x5_module_init+0x0/0x42 @ 1
[ 21.330010] bus: 'pci': add driver de4x5
[ 21.334176] initcall de4x5_module_init+0x0/0x42 returned 0 after 0 usecs
[ 21.340004] calling uli526x_init_module+0x0/0xc3 @ 1
[ 21.345046] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 21.350006] bus: 'pci': add driver uli526x
[ 21.354383] initcall uli526x_init_module+0x0/0xc3 returned 0 after 9765 usecs
[ 21.360005] calling mkiss_init_driver+0x0/0x68 @ 1
[ 21.370002] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[ 21.375049] initcall mkiss_init_driver+0x0/0x68 returned 0 after 0 usecs
[ 21.380003] calling sixpack_init_driver+0x0/0x68 @ 1
[ 21.385047] AX.25: 6pack driver, Revision: 0.3.0
[ 21.390004] initcall sixpack_init_driver+0x0/0x68 returned 0 after 9765 usecs
[ 21.400025] calling bpq_init_driver+0x0/0x8c @ 1
[ 21.404750] AX.25: bpqether driver version 004
[ 21.409188] initcall bpq_init_driver+0x0/0x8c returned 0 after 0 usecs
[ 21.410004] calling init_baycomserfdx+0x0/0x120 @ 1
[ 21.420002] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 21.420005] baycom_ser_fdx: version 0.10 compiled 22:49:37 Aug 2 2009
[ 21.430031] device: 'bcsf0': device_add
[ 21.434998] device: 'bcsf1': device_add
[ 21.441145] device: 'bcsf2': device_add
[ 21.446202] device: 'bcsf3': device_add
[ 21.451234] initcall init_baycomserfdx+0x0/0x120 returned 0 after 29296 usecs
[ 21.460006] calling hdlcdrv_init_driver+0x0/0x49 @ 1
[ 21.465054] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[ 21.470002] hdlcdrv: version 0.8 compiled 22:49:38 Aug 2 2009
[ 21.475830] initcall hdlcdrv_init_driver+0x0/0x49 returned 0 after 9765 usecs
[ 21.480003] calling usb_irda_init+0x0/0x65 @ 1
[ 21.484532] bus: 'usb': add driver irda-usb
[ 21.490264] usbcore: registered new interface driver irda-usb
[ 21.496055] USB IrDA support registered
[ 21.500028] initcall usb_irda_init+0x0/0x65 returned 0 after 19531 usecs
[ 21.510004] calling nsc_ircc_init+0x0/0x2a8 @ 1
[ 21.514615] Platform driver 'nsc-ircc' needs updating - please use dev_pm_ops
[ 21.520004] bus: 'platform': add driver nsc-ircc
[ 21.524878] bus: 'platform': remove driver nsc-ircc
[ 21.530235] driver: 'nsc-ircc': driver_release
[ 21.534681] initcall nsc_ircc_init+0x0/0x2a8 returned -19 after 19531 usecs
[ 21.540004] calling smsc_ircc_init+0x0/0x4f9 @ 1
[ 21.544702] Platform driver 'smsc-ircc2' needs updating - please use dev_pm_ops
[ 21.550003] bus: 'platform': add driver smsc-ircc2
[ 21.560427] bus: 'platform': remove driver smsc-ircc2
[ 21.565713] driver: 'smsc-ircc2': driver_release
[ 21.570032] initcall smsc_ircc_init+0x0/0x4f9 returned -19 after 29296 usecs
[ 21.577076] calling ali_ircc_init+0x0/0x812 @ 1
[ 21.580003] Platform driver 'ali-ircc' needs updating - please use dev_pm_ops
[ 21.587126] bus: 'platform': add driver ali-ircc
[ 21.590265] bus: 'platform': remove driver ali-ircc
[ 21.595340] driver: 'ali-ircc': driver_release
[ 21.600010] initcall ali_ircc_init+0x0/0x812 returned -19 after 19531 usecs
[ 21.610004] calling via_ircc_init+0x0/0x82 @ 1
[ 21.614541] bus: 'pci': add driver via-ircc
[ 21.618972] initcall via_ircc_init+0x0/0x82 returned 0 after 0 usecs
[ 21.620005] calling kingsun_init+0x0/0x42 @ 1
[ 21.630007] bus: 'usb': add driver kingsun-sir
[ 21.634666] usbcore: registered new interface driver kingsun-sir
[ 21.640009] initcall kingsun_init+0x0/0x42 returned 0 after 9765 usecs
[ 21.646528] calling ksdazzle_init+0x0/0x42 @ 1
[ 21.650004] bus: 'usb': add driver ksdazzle-sir
[ 21.654740] usbcore: registered new interface driver ksdazzle-sir
[ 21.660009] initcall ksdazzle_init+0x0/0x42 returned 0 after 9765 usecs
[ 21.666616] calling ks959_init+0x0/0x42 @ 1
[ 21.670004] bus: 'usb': add driver ks959-sir
[ 21.674483] usbcore: registered new interface driver ks959-sir
[ 21.680009] initcall ks959_init+0x0/0x42 returned 0 after 9765 usecs
[ 21.690004] calling init_netconsole+0x0/0x260 @ 1
[ 21.694793] console [netcon0] enabled
[ 21.698450] netconsole: network logging started
[ 21.700004] initcall init_netconsole+0x0/0x260 returned 0 after 9765 usecs
[ 21.710006] calling niu_init+0x0/0x64 @ 1
[ 21.714106] bus: 'pci': add driver niu
[ 21.718092] initcall niu_init+0x0/0x64 returned 0 after 0 usecs
[ 21.720027] calling init+0x0/0x39 @ 1
[ 21.723774] bus: 'virtio': add driver virtio_net
[ 21.730233] initcall init+0x0/0x39 returned 0 after 9765 usecs
[ 21.736062] calling efx_init_module+0x0/0xfd @ 1
[ 21.740003] Solarflare NET driver v2.3
[ 21.744083] bus: 'pci': add driver sfc
[ 21.750249] initcall efx_init_module+0x0/0xfd returned 0 after 9765 usecs
[ 21.757032] calling i2400m_driver_init+0x0/0x2d @ 1
[ 21.760005] initcall i2400m_driver_init+0x0/0x2d returned 0 after 0 usecs
[ 21.770004] calling i2400ms_driver_init+0x0/0x39 @ 1
[ 21.775049] bus: 'sdio': add driver i2400m_sdio
[ 21.780219] initcall i2400ms_driver_init+0x0/0x39 returned 0 after 9765 usecs
[ 21.787344] calling i2o_iop_init+0x0/0x6c @ 1
[ 21.790003] I2O subsystem v1.325
[ 21.793227] i2o: max drivers = 8
[ 21.796733] bus: 'i2o': registered
[ 21.800255] bus: 'i2o': add driver exec-osm
[ 21.804653] bus: 'pci': add driver PCI_I2O
[ 21.810304] initcall i2o_iop_init+0x0/0x6c returned 0 after 19531 usecs
[ 21.816908] calling i2o_bus_init+0x0/0x68 @ 1
[ 21.820003] I2O Bus Adapter OSM v1.317
[ 21.823749] bus: 'i2o': add driver bus-osm
[ 21.830169] initcall i2o_bus_init+0x0/0x68 returned 0 after 9765 usecs
[ 21.836688] calling i2o_scsi_init+0x0/0x68 @ 1
[ 21.840003] I2O SCSI Peripheral OSM v1.316
[ 21.844095] bus: 'i2o': add driver scsi-osm
[ 21.848521] initcall i2o_scsi_init+0x0/0x68 returned 0 after 0 usecs
[ 21.850004] calling fusion_init+0x0/0x164 @ 1
[ 21.860003] Fusion MPT base driver 3.04.10
[ 21.864096] Copyright (c) 1999-2008 LSI Corporation
[ 21.869005] initcall fusion_init+0x0/0x164 returned 0 after 0 usecs
[ 21.870004] calling mptfc_init+0x0/0x115 @ 1
[ 21.880024] Fusion MPT FC Host driver 3.04.10
[ 21.884408] bus: 'pci': add driver mptfc
[ 21.888612] initcall mptfc_init+0x0/0x115 returned 0 after 0 usecs
[ 21.890005] calling mptctl_init+0x0/0x141 @ 1
[ 21.894448] Fusion MPT misc device (ioctl) driver 3.04.10
[ 21.900011] device: 'mptctl': device_add
[ 21.904214] mptctl: Registered with Fusion MPT base driver
[ 21.910004] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 21.915135] initcall mptctl_init+0x0/0x141 returned 0 after 19531 usecs
[ 21.920004] calling mpt_lan_init+0x0/0xa4 @ 1
[ 21.930005] Fusion MPT LAN driver 3.04.10
[ 21.934011] initcall mpt_lan_init+0x0/0xa4 returned 0 after 0 usecs
[ 21.940004] calling fw_core_init+0x0/0xb0 @ 1
[ 21.944692] bus: 'firewire': registered
[ 21.948570] initcall fw_core_init+0x0/0xb0 returned 0 after 0 usecs
[ 21.950028] calling fw_ohci_init+0x0/0x42 @ 1
[ 21.960009] bus: 'pci': add driver firewire_ohci
[ 21.964878] initcall fw_ohci_init+0x0/0x42 returned 0 after 0 usecs
[ 21.970009] calling sbp2_init+0x0/0x6d @ 1
[ 21.974287] bus: 'firewire': add driver sbp2
[ 21.980261] initcall sbp2_init+0x0/0x6d returned 0 after 9765 usecs
[ 21.986519] calling ohci1394_init+0x0/0x42 @ 1
[ 21.990032] bus: 'pci': add driver ohci1394
[ 21.994449] initcall ohci1394_init+0x0/0x42 returned 0 after 0 usecs
[ 22.000074] calling video1394_init_module+0x0/0xfc @ 1
[ 22.005296] bus: 'ieee1394': add driver video1394
[ 22.010222] video1394: Installed video1394 module
[ 22.014920] initcall video1394_init_module+0x0/0xfc returned 0 after 9765 usecs
[ 22.020022] calling init_raw1394+0x0/0x11a @ 1
[ 22.024560] device: 'raw1394': device_add
[ 22.030267] ieee1394: raw1394: /dev/raw1394 device initialized
[ 22.036095] bus: 'ieee1394': add driver raw1394
[ 22.040280] initcall init_raw1394+0x0/0x11a returned 0 after 19531 usecs
[ 22.050014] calling dv1394_init_module+0x0/0xc5 @ 1
[ 22.054974] bus: 'ieee1394': add driver dv1394
[ 22.059649] initcall dv1394_init_module+0x0/0xc5 returned 0 after 0 usecs
[ 22.060004] calling ether1394_init_module+0x0/0x96 @ 1
[ 22.070487] bus: 'ieee1394': add driver eth1394
[ 22.075223] initcall ether1394_init_module+0x0/0x96 returned 0 after 0 usecs
[ 22.080005] calling cdrom_init+0x0/0x91 @ 1
[ 22.084268] initcall cdrom_init+0x0/0x91 returned 0 after 0 usecs
[ 22.090004] calling ks0108_init+0x0/0xe0 @ 1
[ 22.094359] parport0: cannot grant exclusive access for device ks0108
[ 22.100008] ks0108: ERROR: parport didn't register new device
[ 22.110004] initcall ks0108_init+0x0/0xe0 returned -22 after 19531 usecs
[ 22.116696] initcall ks0108_init+0x0/0xe0 returned with error code -22
[ 22.120026] calling spi_gpio_init+0x0/0x40 @ 1
[ 22.124557] bus: 'platform': add driver spi_gpio
[ 22.130240] bus: 'platform': remove driver spi_gpio
[ 22.135310] driver: 'spi_gpio': driver_release
[ 22.140011] initcall spi_gpio_init+0x0/0x40 returned -19 after 19531 usecs
[ 22.150004] calling init_spi_lm70llp+0x0/0x39 @ 1
[ 22.154796] parport0: cannot grant exclusive access for device spi-lm70llp
[ 22.160008] spi-lm70llp: spi_lm70llp probe fail, status -12
[ 22.165578] initcall init_spi_lm70llp+0x0/0x39 returned 0 after 9765 usecs
[ 22.170003] calling spidev_init+0x0/0xbf @ 1
[ 22.174363] device class 'spidev': registering
[ 22.180245] bus: 'spi': add driver spidev
[ 22.184505] initcall spidev_init+0x0/0xbf returned 0 after 9765 usecs
[ 22.190005] calling tle62x0_init+0x0/0x39 @ 1
[ 22.194442] bus: 'spi': add driver tle62x0
[ 22.200209] initcall tle62x0_init+0x0/0x39 returned 0 after 9765 usecs
[ 22.206729] calling aoe_init+0x0/0xd5 @ 1
[ 22.210011] device class 'aoe': registering
[ 22.214438] device: 'err': device_add
[ 22.220271] device: 'discover': device_add
[ 22.224630] device: 'interfaces': device_add
[ 22.230263] device: 'revalidate': device_add
[ 22.234776] device: 'flush': device_add
[ 22.239272] aoe: AoE v47 initialised.
[ 22.240246] initcall aoe_init+0x0/0xd5 returned 0 after 29296 usecs
[ 22.250005] calling uwb_subsys_init+0x0/0x77 @ 1
[ 22.254723] device class 'uwb_rc': registering
[ 22.259401] initcall uwb_subsys_init+0x0/0x77 returned 0 after 0 usecs
[ 22.260006] calling wlp_subsys_init+0x0/0x2d @ 1
[ 22.270004] initcall wlp_subsys_init+0x0/0x2d returned 0 after 0 usecs
[ 22.276521] calling umc_bus_init+0x0/0x39 @ 1
[ 22.280259] bus: 'umc': registered
[ 22.283663] initcall umc_bus_init+0x0/0x39 returned 0 after 0 usecs
[ 22.290005] calling whci_init+0x0/0x42 @ 1
[ 22.294196] bus: 'pci': add driver whci
[ 22.298302] initcall whci_init+0x0/0x42 returned 0 after 0 usecs
[ 22.300004] calling whcrc_driver_init+0x0/0x42 @ 1
[ 22.310003] bus: 'umc': add driver whc-rc
[ 22.314226] initcall whcrc_driver_init+0x0/0x42 returned 0 after 0 usecs
[ 22.320005] calling hwarc_driver_init+0x0/0x42 @ 1
[ 22.324879] bus: 'usb': add driver hwa-rc
[ 22.330224] usbcore: registered new interface driver hwa-rc
[ 22.335799] initcall hwarc_driver_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.340005] calling gpio_vbus_init+0x0/0x40 @ 1
[ 22.344616] bus: 'platform': add driver gpio-vbus
[ 22.350262] bus: 'platform': remove driver gpio-vbus
[ 22.355418] driver: 'gpio-vbus': driver_release
[ 22.360011] initcall gpio_vbus_init+0x0/0x40 returned -19 after 19531 usecs
[ 22.366962] calling mon_init+0x0/0x141 @ 1
[ 22.370015] device class 'usbmon': registering
[ 22.374689] device: 'usbmon0': device_add
[ 22.380339] initcall mon_init+0x0/0x141 returned 0 after 9765 usecs
[ 22.386599] calling ehci_hcd_init+0x0/0x10e @ 1
[ 22.390004] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 22.400003] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 22.406028] bus: 'pci': add driver ehci_hcd
[ 22.410027] bus: 'pci': driver_probe_device: matched device 0000:00:02.1 with driver ehci_hcd
[ 22.418537] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:02.1
[ 22.420204] ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 22.430007] ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
[ 22.440005] ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
[ 22.446113] initcall ehci_hcd_init+0x0/0x10e returned 0 after 48828 usecs
[ 22.450027] calling oxu_module_init+0x0/0x39 @ 1
[ 22.460004] bus: 'platform': add driver oxu210hp-hcd
[ 22.465183] initcall oxu_module_init+0x0/0x39 returned 0 after 0 usecs
[ 22.470057] calling ohci_hcd_mod_init+0x0/0x101 @ 1
[ 22.475012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 22.480003] ohci_hcd: block sizes: ed 80 td 96
[ 22.484478] bus: 'pci': add driver ohci_hcd
[ 22.490026] bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver ohci_hcd
[ 22.500003] bus: 'pci': really_probe: probing driver ohci_hcd with device 0000:00:02.0
[ 22.508021] ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 22.510042] ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!
[ 22.520008] ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
[ 22.530272] bus: 'ssb': add driver ohci_hcd
[ 22.534661] initcall ohci_hcd_mod_init+0x0/0x101 returned 0 after 58593 usecs
[ 22.540027] calling uhci_hcd_init+0x0/0x159 @ 1
[ 22.544640] uhci_hcd: USB Universal Host Controller Interface driver
[ 22.550486] bus: 'pci': add driver uhci_hcd
[ 22.554946] initcall uhci_hcd_init+0x0/0x159 returned 0 after 9765 usecs
[ 22.560058] calling sl811h_init+0x0/0x67 @ 1
[ 22.570003] sl811: driver sl811-hcd, 19 May 2005
[ 22.574615] bus: 'platform': add driver sl811-hcd
[ 22.580206] initcall sl811h_init+0x0/0x67 returned 0 after 9765 usecs
[ 22.586641] calling u132_hcd_init+0x0/0xd8 @ 1
[ 22.590023] driver u132_hcd built at 22:49:46 on Aug 2 2009
[ 22.595786] bus: 'platform': add driver u132_hcd
[ 22.600300] initcall u132_hcd_init+0x0/0xd8 returned 0 after 9765 usecs
[ 22.606910] calling isp1760_init+0x0/0x76 @ 1
[ 22.610798] bus: 'platform': add driver isp1760
[ 22.615539] bus: 'pci': add driver isp1760
[ 22.620298] initcall isp1760_init+0x0/0x76 returned 0 after 9765 usecs
[ 22.626814] calling hwahc_driver_init+0x0/0x42 @ 1
[ 22.630011] bus: 'usb': add driver hwa-hc
[ 22.634226] usbcore: registered new interface driver hwa-hc
[ 22.640009] initcall hwahc_driver_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.650004] calling c67x00_init+0x0/0x39 @ 1
[ 22.654356] bus: 'platform': add driver c67x00
[ 22.660321] initcall c67x00_init+0x0/0x39 returned 0 after 9765 usecs
[ 22.666752] calling wusbcore_init+0x0/0x9a @ 1
[ 22.670127] initcall wusbcore_init+0x0/0x9a returned 0 after 0 usecs
[ 22.676477] calling cbaf_driver_init+0x0/0x42 @ 1
[ 22.680005] bus: 'usb': add driver wusb-cbaf
[ 22.684544] usbcore: registered new interface driver wusb-cbaf
[ 22.690009] initcall cbaf_driver_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.696875] calling acm_init+0x0/0x128 @ 1
[ 22.700016] bus: 'usb': add driver cdc_acm
[ 22.704317] usbcore: registered new interface driver cdc_acm
[ 22.710007] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 22.720005] initcall acm_init+0x0/0x128 returned 0 after 19531 usecs
[ 22.726348] calling usb_stor_init+0x0/0x6a @ 1
[ 22.730004] Initializing USB Mass Storage driver...
[ 22.734878] bus: 'usb': add driver usb-storage
[ 22.740216] usbcore: registered new interface driver usb-storage
[ 22.746220] USB Mass Storage support registered.
[ 22.750033] initcall usb_stor_init+0x0/0x6a returned 0 after 19531 usecs
[ 22.760004] calling alauda_init+0x0/0x42 @ 1
[ 22.764355] bus: 'usb': add driver ums-alauda
[ 22.768974] usbcore: registered new interface driver ums-alauda
[ 22.770009] initcall alauda_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.780004] calling cypress_init+0x0/0x42 @ 1
[ 22.784444] bus: 'usb': add driver ums-cypress
[ 22.790207] usbcore: registered new interface driver ums-cypress
[ 22.796213] initcall cypress_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.800005] calling datafab_init+0x0/0x42 @ 1
[ 22.804443] bus: 'usb': add driver ums-datafab
[ 22.810214] usbcore: registered new interface driver ums-datafab
[ 22.816223] initcall datafab_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.820005] calling freecom_init+0x0/0x42 @ 1
[ 22.824442] bus: 'usb': add driver ums-freecom
[ 22.830229] usbcore: registered new interface driver ums-freecom
[ 22.840009] initcall freecom_init+0x0/0x42 returned 0 after 19531 usecs
[ 22.846616] calling isd200_init+0x0/0x42 @ 1
[ 22.850004] bus: 'usb': add driver ums-isd200
[ 22.854567] usbcore: registered new interface driver ums-isd200
[ 22.860009] initcall isd200_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.866442] calling jumpshot_init+0x0/0x42 @ 1
[ 22.870004] bus: 'usb': add driver ums-jumpshot
[ 22.874768] usbcore: registered new interface driver ums-jumpshot
[ 22.880009] initcall jumpshot_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.886614] calling sddr09_init+0x0/0x42 @ 1
[ 22.890004] bus: 'usb': add driver ums-sddr09
[ 22.894568] usbcore: registered new interface driver ums-sddr09
[ 22.900009] initcall sddr09_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.910004] calling usbat_init+0x0/0x42 @ 1
[ 22.914270] bus: 'usb': add driver ums-usbat
[ 22.920120] usbcore: registered new interface driver ums-usbat
[ 22.925954] initcall usbat_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.930006] calling usb_mdc800_init+0x0/0x325 @ 1
[ 22.934801] bus: 'usb': add driver mdc800
[ 22.940213] usbcore: registered new interface driver mdc800
[ 22.945778] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 22.950006] initcall usb_mdc800_init+0x0/0x325 returned 0 after 19531 usecs
[ 22.960004] calling microtek_drv_init+0x0/0x42 @ 1
[ 22.964876] bus: 'usb': add driver microtekX6
[ 22.970212] usbcore: registered new interface driver microtekX6
[ 22.976127] initcall microtek_drv_init+0x0/0x42 returned 0 after 9765 usecs
[ 22.980005] calling adu_init+0x0/0xba @ 1
[ 22.984094] drivers/usb/misc/adutux.c : adu_init : enter
[ 22.990004] bus: 'usb': add driver adutux
[ 22.994269] usbcore: registered new interface driver adutux
[ 23.000007] adutux adutux (see www.ontrak.net) v0.0.13
[ 23.005142] adutux is an experimental driver. Use at your own risk
[ 23.010005] drivers/usb/misc/adutux.c : adu_init : leave, return value 0
[ 23.020004] initcall adu_init+0x0/0xba returned 0 after 39062 usecs
[ 23.026260] calling appledisplay_init+0x0/0x80 @ 1
[ 23.030099] bus: 'usb': add driver appledisplay
[ 23.034833] usbcore: registered new interface driver appledisplay
[ 23.040037] initcall appledisplay_init+0x0/0x80 returned 0 after 9765 usecs
[ 23.050004] calling berry_init+0x0/0x42 @ 1
[ 23.054270] bus: 'usb': add driver berry_charge
[ 23.059010] usbcore: registered new interface driver berry_charge
[ 23.060009] initcall berry_init+0x0/0x42 returned 0 after 9765 usecs
[ 23.070004] calling usb_cytherm_init+0x0/0x70 @ 1
[ 23.074789] bus: 'usb': add driver cytherm
[ 23.080214] usbcore: registered new interface driver cytherm
[ 23.085871] cytherm: v1.0:Cypress USB Thermometer driver
[ 23.090006] initcall usb_cytherm_init+0x0/0x70 returned 0 after 19531 usecs
[ 23.096955] calling emi26_init+0x0/0x42 @ 1
[ 23.100004] bus: 'usb': add driver emi26 - firmware loader
[ 23.105693] usbcore: registered new interface driver emi26 - firmware loader
[ 23.110009] initcall emi26_init+0x0/0x42 returned 0 after 9765 usecs
[ 23.120004] calling ftdi_elan_init+0x0/0x192 @ 1
[ 23.124700] driver ftdi-elan built at 22:49:45 on Aug 2 2009
[ 23.130336] bus: 'usb': add driver ftdi-elan
[ 23.134824] usbcore: registered new interface driver ftdi-elan
[ 23.140019] initcall ftdi_elan_init+0x0/0x192 returned 0 after 19531 usecs
[ 23.150004] calling iowarrior_init+0x0/0x42 @ 1
[ 23.154617] bus: 'usb': add driver iowarrior
[ 23.159099] usbcore: registered new interface driver iowarrior
[ 23.160009] initcall iowarrior_init+0x0/0x42 returned 0 after 9765 usecs
[ 23.170004] calling isight_firmware_init+0x0/0x42 @ 1
[ 23.175138] bus: 'usb': add driver isight_firmware
[ 23.180225] usbcore: registered new interface driver isight_firmware
[ 23.186576] initcall isight_firmware_init+0x0/0x42 returned 0 after 9765 usecs
[ 23.190005] calling usb_lcd_init+0x0/0x60 @ 1
[ 23.200004] bus: 'usb': add driver usblcd
[ 23.204221] usbcore: registered new interface driver usblcd
[ 23.210009] initcall usb_lcd_init+0x0/0x60 returned 0 after 9765 usecs
[ 23.216530] calling ld_usb_init+0x0/0x60 @ 1
[ 23.220004] bus: 'usb': add driver ldusb
[ 23.224135] usbcore: registered new interface driver ldusb
[ 23.230011] initcall ld_usb_init+0x0/0x60 returned 0 after 9765 usecs
[ 23.236444] calling usb_led_init+0x0/0x60 @ 1
[ 23.240005] bus: 'usb': add driver usbled
[ 23.244221] usbcore: registered new interface driver usbled
[ 23.250009] initcall usb_led_init+0x0/0x60 returned 0 after 9765 usecs
[ 23.256529] calling usb_rio_init+0x0/0x5e @ 1
[ 23.260005] bus: 'usb': add driver rio500
[ 23.264231] usbcore: registered new interface driver rio500
[ 23.270010] rio500: v1.1:USB Rio 500 driver
[ 23.274191] initcall usb_rio_init+0x0/0x5e returned 0 after 9765 usecs
[ 23.280004] calling tv_init+0x0/0x70 @ 1
[ 23.284008] bus: 'usb': add driver trancevibrator
[ 23.290215] usbcore: registered new interface driver trancevibrator
[ 23.296480] trancevibrator: v1.1:PlayStation 2 Trance Vibrator driver
[ 23.300006] initcall tv_init+0x0/0x70 returned 0 after 19531 usecs
[ 23.310004] calling usb_sevseg_init+0x0/0x60 @ 1
[ 23.314704] bus: 'usb': add driver usbsevseg
[ 23.319184] usbcore: registered new interface driver usbsevseg
[ 23.320009] initcall usb_sevseg_init+0x0/0x60 returned 0 after 9765 usecs
[ 23.330006] calling vstusb_init+0x0/0x67 @ 1
[ 23.334357] bus: 'usb': add driver vstusb
[ 23.340228] usbcore: registered new interface driver vstusb
[ 23.345796] initcall vstusb_init+0x0/0x67 returned 0 after 9765 usecs
[ 23.350005] calling i8042_init+0x0/0xdb @ 1
[ 23.354318] bus: 'platform': add driver i8042
[ 23.360227] Registering platform device 'i8042'. Parent at platform
[ 23.366489] device: 'i8042': device_add
[ 23.370013] bus: 'platform': add device i8042
[ 23.374641] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[ 23.380003] bus: 'platform': really_probe: probing driver i8042 with device i8042
[ 23.391444] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.391444] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.391444] driver: 'i8042': driver_bound: bound to device 'i8042'
[ 23.400096] bus: 'platform': really_probe: bound device i8042 to driver i8042
[ 23.407233] initcall i8042_init+0x0/0xdb returned 0 after 58593 usecs
[ 23.410006] calling parkbd_init+0x0/0x230 @ 1
[ 23.414447] parport0: cannot grant exclusive access for device parkbd
[ 23.420081] initcall parkbd_init+0x0/0x230 returned -19 after 9765 usecs
[ 23.430005] calling serport_init+0x0/0x5a @ 1
[ 23.434443] initcall serport_init+0x0/0x5a returned 0 after 0 usecs
[ 23.440031] calling pcips2_init+0x0/0x42 @ 1
[ 23.444400] bus: 'pci': add driver pcips2
[ 23.460000] device: 'serio0': device_add
[ 23.460388] initcall pcips2_init+0x0/0x42 returned 0 after 9765 usecs
[ 23.460393] calling serio_raw_init+0x0/0x42 @ 1
[ 23.460397] bus: 'serio': add driver serio_raw
[ 23.460620] initcall serio_raw_init+0x0/0x42 returned 0 after 0 usecs
[ 23.460624] calling emu_init+0x0/0x42 @ 1
[ 23.460641] bus: 'pci': add driver Emu10k1_gameport
[ 23.460942] initcall emu_init+0x0/0x42 returned 0 after 0 usecs
[ 23.460947] calling fm801_gp_init+0x0/0x42 @ 1
[ 23.460953] bus: 'pci': add driver FM801_gameport
[ 23.461189] initcall fm801_gp_init+0x0/0x42 returned 0 after 0 usecs
[ 23.461193] calling l4_init+0x0/0x37f @ 1
[ 23.461215] initcall l4_init+0x0/0x37f returned -19 after 0 usecs
[ 23.461219] calling ns558_init+0x0/0x311 @ 1
[ 23.470000] initcall ns558_init+0x0/0x311 returned -19 after 0 usecs
[ 23.470000] calling mousedev_init+0x0/0x87 @ 1
[ 23.470000] device: 'mice': device_add
[ 23.470000] mice: PS/2 mouse device common for all mice
[ 23.470000] initcall mousedev_init+0x0/0x87 returned 0 after 0 usecs
[ 23.470000] calling joydev_init+0x0/0x39 @ 1
[ 23.470000] initcall joydev_init+0x0/0x39 returned 0 after 0 usecs
[ 23.470000] calling evdev_init+0x0/0x39 @ 1
[ 23.470000] initcall evdev_init+0x0/0x39 returned 0 after 0 usecs
[ 23.470000] calling evbug_init+0x0/0x39 @ 1
[ 23.470000] initcall evbug_init+0x0/0x39 returned 0 after 0 usecs
[ 23.470000] calling atkbd_init+0x0/0x42 @ 1
[ 23.470000] bus: 'serio': add driver atkbd
[ 23.470000] initcall atkbd_init+0x0/0x42 returned 0 after 0 usecs
[ 23.470000] calling gpio_keys_init+0x0/0x39 @ 1
[ 23.470000] bus: 'platform': add driver gpio-keys
[ 23.470000] initcall gpio_keys_init+0x0/0x39 returned 0 after 0 usecs
[ 23.470000] calling lkkbd_init+0x0/0x42 @ 1
[ 23.470000] bus: 'serio': add driver lkkbd
[ 23.470000] initcall lkkbd_init+0x0/0x42 returned 0 after 0 usecs
[ 23.470000] calling lm8323_init+0x0/0x3b @ 1
[ 23.470000] bus: 'i2c': add driver lm8323
[ 23.470000] initcall lm8323_init+0x0/0x3b returned 0 after 0 usecs
[ 23.470000] calling matrix_keypad_init+0x0/0x39 @ 1
[ 23.470000] bus: 'platform': add driver matrix-keypad
[ 23.470000] initcall matrix_keypad_init+0x0/0x39 returned 0 after 0 usecs
[ 23.470000] calling sunkbd_init+0x0/0x42 @ 1
[ 23.470000] bus: 'serio': add driver sunkbd
[ 23.470000] initcall sunkbd_init+0x0/0x42 returned 0 after 0 usecs
[ 23.470000] calling xtkbd_init+0x0/0x42 @ 1
[ 23.470000] bus: 'serio': add driver xtkbd
[ 23.470000] initcall xtkbd_init+0x0/0x42 returned 0 after 0 usecs
[ 23.470000] calling atp_init+0x0/0x42 @ 1
[ 23.470000] bus: 'usb': add driver appletouch
[ 23.470000] usbcore: registered new interface driver appletouch
[ 23.470000] initcall atp_init+0x0/0x42 returned 0 after 0 usecs
[ 23.470000] calling gpio_mouse_init+0x0/0x39 @ 1
[ 23.470000] bus: 'platform': add driver gpio_mouse
[ 23.470000] initcall gpio_mouse_init+0x0/0x39 returned 0 after 0 usecs
[ 23.470000] calling psmouse_init+0x0/0x9a @ 1
[ 23.470000] bus: 'serio': add device serio0
[ 23.480948] bus: 'serio': add driver psmouse
[ 23.485465] bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
[ 23.485622] initcall psmouse_init+0x0/0x9a returned 0 after 19531 usecs
[ 23.485627] calling sermouse_init+0x0/0x42 @ 1
[ 23.485630] bus: 'serio': add driver sermouse
[ 23.485878] initcall sermouse_init+0x0/0x42 returned 0 after 0 usecs
[ 23.485882] calling synaptics_i2c_init+0x0/0x3b @ 1
[ 23.485887] bus: 'i2c': add driver synaptics_i2c
[ 23.486098] initcall synaptics_i2c_init+0x0/0x3b returned 0 after 0 usecs
[ 23.486103] calling vsxxxaa_init+0x0/0x42 @ 1
[ 23.486106] bus: 'serio': add driver vsxxxaa
[ 23.486356] initcall vsxxxaa_init+0x0/0x42 returned 0 after 0 usecs
[ 23.486360] calling a3d_init+0x0/0x42 @ 1
[ 23.486363] bus: 'gameport': add driver adc
[ 23.486581] initcall a3d_init+0x0/0x42 returned 0 after 0 usecs
[ 23.486585] calling analog_init+0x0/0x118 @ 1
[ 23.486588] bus: 'gameport': add driver analog
[ 23.486841] initcall analog_init+0x0/0x118 returned 0 after 0 usecs
[ 23.486845] calling gc_init+0x0/0x62b @ 1
[ 23.486850] initcall gc_init+0x0/0x62b returned -19 after 0 usecs
[ 23.486853] calling gf2k_init+0x0/0x42 @ 1
[ 23.486856] bus: 'gameport': add driver gf2k
[ 23.487069] initcall gf2k_init+0x0/0x42 returned 0 after 0 usecs
[ 23.487073] calling grip_init+0x0/0x42 @ 1
[ 23.487076] bus: 'gameport': add driver grip_mp
[ 23.487326] initcall grip_init+0x0/0x42 returned 0 after 0 usecs
[ 23.487330] calling iforce_init+0x0/0x42 @ 1
[ 23.487333] bus: 'serio': add driver iforce
[ 23.487558] initcall iforce_init+0x0/0x42 returned 0 after 0 usecs
[ 23.487563] calling interact_init+0x0/0x42 @ 1
[ 23.487566] bus: 'gameport': add driver interact
[ 23.487813] initcall interact_init+0x0/0x42 returned 0 after 0 usecs
[ 23.487818] calling magellan_init+0x0/0x42 @ 1
[ 23.487821] bus: 'serio': add driver magellan
[ 23.488056] initcall magellan_init+0x0/0x42 returned 0 after 0 usecs
[ 23.488060] calling sw_init+0x0/0x42 @ 1
[ 23.488063] bus: 'gameport': add driver sidewinder
[ 23.488307] initcall sw_init+0x0/0x42 returned 0 after 0 usecs
[ 23.488311] calling spaceball_init+0x0/0x42 @ 1
[ 23.488315] bus: 'serio': add driver spaceball
[ 23.488531] initcall spaceball_init+0x0/0x42 returned 0 after 0 usecs
[ 23.488535] calling spaceorb_init+0x0/0x42 @ 1
[ 23.488538] bus: 'serio': add driver spaceorb
[ 23.488796] initcall spaceorb_init+0x0/0x42 returned 0 after 0 usecs
[ 23.488800] calling stinger_init+0x0/0x42 @ 1
[ 23.488803] bus: 'serio': add driver stinger
[ 23.489038] initcall stinger_init+0x0/0x42 returned 0 after 0 usecs
[ 23.489042] calling tmdc_init+0x0/0x42 @ 1
[ 23.489045] bus: 'gameport': add driver tmdc
[ 23.489289] initcall tmdc_init+0x0/0x42 returned 0 after 0 usecs
[ 23.489293] calling tgfx_init+0x0/0x4a2 @ 1
[ 23.489298] initcall tgfx_init+0x0/0x4a2 returned -19 after 0 usecs
[ 23.489302] calling walkera0701_init+0x0/0x2c8 @ 1
[ 23.489305] walkera0701: parport without interrupt
[ 23.489310] initcall walkera0701_init+0x0/0x2c8 returned -19 after 0 usecs
[ 23.489314] calling ad7877_init+0x0/0x39 @ 1
[ 23.489319] bus: 'spi': add driver ad7877
[ 23.489530] initcall ad7877_init+0x0/0x39 returned 0 after 0 usecs
[ 23.489535] calling ad7879_init+0x0/0x39 @ 1
[ 23.489539] bus: 'spi': add driver ad7879
[ 23.489782] initcall ad7879_init+0x0/0x39 returned 0 after 0 usecs
[ 23.489787] calling elo_init+0x0/0x42 @ 1
[ 23.489791] bus: 'serio': add driver elo
[ 23.490056] initcall elo_init+0x0/0x42 returned 0 after 9765 usecs
[ 23.490060] calling fujitsu_init+0x0/0x42 @ 1
[ 23.490063] bus: 'serio': add driver fujitsu_ts
[ 23.490326] initcall fujitsu_init+0x0/0x42 returned 0 after 0 usecs
[ 23.490331] calling usbtouch_init+0x0/0x42 @ 1
[ 23.490342] bus: 'usb': add driver usbtouchscreen
[ 23.490574] usbcore: registered new interface driver usbtouchscreen
[ 23.490584] initcall usbtouch_init+0x0/0x42 returned 0 after 0 usecs
[ 23.490588] calling touchit213_init+0x0/0x42 @ 1
[ 23.490592] bus: 'serio': add driver touchit213
[ 23.490840] initcall touchit213_init+0x0/0x42 returned 0 after 0 usecs
[ 23.490844] calling tr_init+0x0/0x42 @ 1
[ 23.490847] bus: 'serio': add driver touchright
[ 23.491083] initcall tr_init+0x0/0x42 returned 0 after 0 usecs
[ 23.491087] calling tw_init+0x0/0x42 @ 1
[ 23.491090] bus: 'serio': add driver touchwin
[ 23.491350] initcall tw_init+0x0/0x42 returned 0 after 0 usecs
[ 23.491354] calling tsc2007_init+0x0/0x3b @ 1
[ 23.491359] bus: 'i2c': add driver tsc2007
[ 23.491582] initcall tsc2007_init+0x0/0x3b returned 0 after 0 usecs
[ 23.491586] calling da9034_touch_init+0x0/0x39 @ 1
[ 23.491593] bus: 'platform': add driver da9034-touch
[ 23.491847] initcall da9034_touch_init+0x0/0x39 returned 0 after 0 usecs
[ 23.491852] calling w90x900ts_init+0x0/0x39 @ 1
[ 23.491856] bus: 'platform': add driver w90x900-ts
[ 23.492067] initcall w90x900ts_init+0x0/0x39 returned 0 after 0 usecs
[ 23.492072] calling i2c_dev_init+0x0/0xcb @ 1
[ 23.492074] i2c /dev entries driver
[ 23.492096] device class 'i2c-dev': registering
[ 23.492345] bus: 'i2c': add driver dev_driver
[ 23.492554] initcall i2c_dev_init+0x0/0xcb returned 0 after 0 usecs
[ 23.492559] calling i2c_ali1535_init+0x0/0x42 @ 1
[ 23.492580] bus: 'pci': add driver ali1535_smbus
[ 23.492884] initcall i2c_ali1535_init+0x0/0x42 returned 0 after 0 usecs
[ 23.492889] calling ali1563_init+0x0/0x42 @ 1
[ 23.492896] bus: 'pci': add driver ali1563_smbus
[ 23.493123] initcall ali1563_init+0x0/0x42 returned 0 after 0 usecs
[ 23.493128] calling i2c_amd8111_init+0x0/0x42 @ 1
[ 23.493135] bus: 'pci': add driver amd8111_smbus2
[ 23.493409] initcall i2c_amd8111_init+0x0/0x42 returned 0 after 0 usecs
[ 23.493414] calling i2c_i801_init+0x0/0x42 @ 1
[ 23.493421] bus: 'pci': add driver i801_smbus
[ 23.493655] initcall i2c_i801_init+0x0/0x42 returned 0 after 0 usecs
[ 23.493660] calling i2c_sch_init+0x0/0x42 @ 1
[ 23.493667] bus: 'pci': add driver isch_smbus
[ 23.493961] initcall i2c_sch_init+0x0/0x42 returned 0 after 0 usecs
[ 23.493966] calling nforce2_init+0x0/0x42 @ 1
[ 23.493972] bus: 'pci': add driver nForce2_smbus
[ 23.493992] bus: 'pci': driver_probe_device: matched device 0000:00:01.1 with driver nForce2_smbus
[ 23.493996] bus: 'pci': really_probe: probing driver nForce2_smbus with device 0000:00:01.1
[ 23.502943] device: 'i2c-0': device_add
[ 23.520109] i2c-adapter i2c-0: Transaction failed (0x10)!
[ 23.560018] device: '0-0050': device_add
[ 23.560030] bus: 'i2c': add device 0-0050
[ 23.560275] bus: 'i2c': driver_probe_device: matched device 0-0050 with driver eeprom
[ 23.560279] bus: 'i2c': really_probe: probing driver eeprom with device 0-0050
[ 23.560297] driver: '0-0050': driver_bound: bound to device 'eeprom'
[ 23.560301] bus: 'i2c': really_probe: bound device 0-0050 to driver eeprom
[ 23.600037] device: '0-0051': device_add
[ 23.600047] bus: 'i2c': add device 0-0051
[ 23.600260] bus: 'i2c': driver_probe_device: matched device 0-0051 with driver eeprom
[ 23.600264] bus: 'i2c': really_probe: probing driver eeprom with device 0-0051
[ 23.600281] driver: '0-0051': driver_bound: bound to device 'eeprom'
[ 23.600284] bus: 'i2c': really_probe: bound device 0-0051 to driver eeprom
[ 23.620068] i2c-adapter i2c-0: Transaction failed (0x10)!
[ 23.640030] i2c-adapter i2c-0: Transaction failed (0x10)!
[ 23.660010] i2c-adapter i2c-0: Transaction failed (0x10)!
[ 23.680010] i2c-adapter i2c-0: Transaction failed (0x10)!
[ 23.700009] i2c-adapter i2c-0: Transaction failed (0x10)!
[ 23.720010] i2c-adapter i2c-0: Transaction failed (0x10)!
[ 23.720057] device: 'i2c-0': device_add
[ 23.720362] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 23.720377] device: 'i2c-1': device_add
[ 23.740111] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.760034] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.780012] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.800010] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.820010] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.840009] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.860009] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.880009] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.900010] i2c-adapter i2c-1: Transaction failed (0x10)!
[ 23.900027] device: 'i2c-1': device_add
[ 23.900284] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 23.900309] driver: '0000:00:01.1': driver_bound: bound to device 'nForce2_smbus'
[ 23.900316] bus: 'pci': really_probe: bound device 0000:00:01.1 to driver nForce2_smbus
[ 23.900560] initcall nforce2_init+0x0/0x42 returned 0 after 400390 usecs
[ 23.900566] calling i2c_piix4_init+0x0/0x42 @ 1
[ 23.900585] bus: 'pci': add driver piix4_smbus
[ 23.900849] initcall i2c_piix4_init+0x0/0x42 returned 0 after 0 usecs
[ 23.900854] calling i2c_sis5595_init+0x0/0x42 @ 1
[ 23.900861] bus: 'pci': add driver sis5595_smbus
[ 23.901126] initcall i2c_sis5595_init+0x0/0x42 returned 0 after 0 usecs
[ 23.901131] calling i2c_sis630_init+0x0/0x42 @ 1
[ 23.901138] bus: 'pci': add driver sis630_smbus
[ 23.901370] initcall i2c_sis630_init+0x0/0x42 returned 0 after 0 usecs
[ 23.901375] calling i2c_sis96x_init+0x0/0x42 @ 1
[ 23.901382] bus: 'pci': add driver sis96x_smbus
[ 23.901649] initcall i2c_sis96x_init+0x0/0x42 returned 0 after 0 usecs
[ 23.901653] calling ocores_i2c_init+0x0/0x39 @ 1
[ 23.901660] bus: 'platform': add driver ocores-i2c
[ 23.901889] initcall ocores_i2c_init+0x0/0x39 returned 0 after 0 usecs
[ 23.901894] calling i2c_adap_simtec_init+0x0/0x39 @ 1
[ 23.901898] bus: 'platform': add driver simtec-i2c
[ 23.902143] initcall i2c_adap_simtec_init+0x0/0x39 returned 0 after 0 usecs
[ 23.902148] calling i2c_parport_init+0x0/0x171 @ 1
[ 23.902151] i2c-parport-light: adapter type unspecified
[ 23.902156] initcall i2c_parport_init+0x0/0x171 returned -19 after 0 usecs
[ 23.902160] calling taos_init+0x0/0x42 @ 1
[ 23.902166] bus: 'serio': add driver taos-evm
[ 23.902387] initcall taos_init+0x0/0x42 returned 0 after 0 usecs
[ 23.902391] calling tsl2550_init+0x0/0x3b @ 1
[ 23.902395] bus: 'i2c': add driver tsl2550
[ 23.902643] initcall tsl2550_init+0x0/0x3b returned 0 after 0 usecs
[ 23.902648] calling videodev_init+0x0/0xad @ 1
[ 23.902651] Linux video capture interface: v2.00
[ 23.902657] device class 'video4linux': registering
[ 23.902872] initcall videodev_init+0x0/0xad returned 0 after 0 usecs
[ 23.902877] calling dabusb_init+0x0/0x11b @ 1
[ 23.902993] bus: 'usb': add driver dabusb
[ 23.903247] usbcore: registered new interface driver dabusb
[ 23.903253] dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999
[ 23.903259] initcall dabusb_init+0x0/0x11b returned 0 after 0 usecs
[ 23.903264] calling gemtek_pci_init+0x0/0x42 @ 1
[ 23.903281] bus: 'pci': add driver gemtek_pci
[ 23.903564] initcall gemtek_pci_init+0x0/0x42 returned 0 after 0 usecs
[ 23.903569] calling maestro_radio_init+0x0/0x5e @ 1
[ 23.903576] bus: 'pci': add driver maestro_radio
[ 23.903842] initcall maestro_radio_init+0x0/0x5e returned 0 after 0 usecs
[ 23.903847] calling dsbr100_init+0x0/0x5a @ 1
[ 23.903854] bus: 'usb': add driver dsbr100
[ 23.904063] usbcore: registered new interface driver dsbr100
[ 23.904070] dsbr100: v0.46:D-Link DSB-R100 USB FM radio driver
[ 23.904075] initcall dsbr100_init+0x0/0x5a returned 0 after 0 usecs
[ 23.904080] calling tea5764_init+0x0/0x53 @ 1
[ 23.904085] bus: 'i2c': add driver radio-tea5764
[ 23.904343] radio_tea5764: v0.01: A driver for the TEA5764 radio chip for EZX Phones.
[ 23.904349] initcall tea5764_init+0x0/0x53 returned 0 after 0 usecs
[ 23.904355] calling w1_init+0x0/0xcd @ 1
[ 23.904357] Driver for 1-wire Dallas network protocol.
[ 23.904602] bus: 'w1': registered
[ 23.904606] bus: 'w1': add driver w1_master_driver
[ 23.904867] bus: 'w1': add driver w1_slave_driver
[ 23.905126] initcall w1_init+0x0/0xcd returned 0 after 0 usecs
[ 23.905131] calling matrox_w1_init+0x0/0x42 @ 1
[ 23.905144] bus: 'pci': add driver matrox_w1
[ 23.905432] initcall matrox_w1_init+0x0/0x42 returned 0 after 0 usecs
[ 23.905437] calling ds_init+0x0/0x65 @ 1
[ 23.905445] bus: 'usb': add driver DS9490R
[ 23.905664] usbcore: registered new interface driver DS9490R
[ 23.905675] initcall ds_init+0x0/0x65 returned 0 after 0 usecs
[ 23.905679] calling sensors_ds2482_init+0x0/0x3b @ 1
[ 23.905684] bus: 'i2c': add driver ds2482
[ 23.905953] initcall sensors_ds2482_init+0x0/0x3b returned 0 after 0 usecs
[ 23.905957] calling w1_therm_init+0x0/0x5b @ 1
[ 23.906032] initcall w1_therm_init+0x0/0x5b returned 0 after 0 usecs
[ 23.906036] calling w1_smem_init+0x0/0x65 @ 1
[ 23.906041] initcall w1_smem_init+0x0/0x65 returned 0 after 0 usecs
[ 23.906045] calling w1_f2d_init+0x0/0x39 @ 1
[ 23.906049] initcall w1_f2d_init+0x0/0x39 returned 0 after 0 usecs
[ 23.906053] calling w1_ds2760_init+0x0/0x51 @ 1
[ 23.906055] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 23.906061] initcall w1_ds2760_init+0x0/0x51 returned 0 after 0 usecs
[ 23.906065] calling w1_bq27000_init+0x0/0x49 @ 1
[ 23.906069] initcall w1_bq27000_init+0x0/0x49 returned -17 after 0 usecs
[ 23.906074] initcall w1_bq27000_init+0x0/0x49 returned with error code -17
[ 23.906078] calling pda_power_init+0x0/0x39 @ 1
[ 23.906084] bus: 'platform': add driver pda-power
[ 23.906308] initcall pda_power_init+0x0/0x39 returned 0 after 0 usecs
[ 23.906312] calling ds2760_battery_init+0x0/0x39 @ 1
[ 23.906316] bus: 'platform': add driver ds2760-battery
[ 23.906595] initcall ds2760_battery_init+0x0/0x39 returned 0 after 0 usecs
[ 23.906600] calling bq27x00_battery_init+0x0/0x57 @ 1
[ 23.906605] bus: 'i2c': add driver bq27200-battery
[ 23.906817] initcall bq27x00_battery_init+0x0/0x57 returned 0 after 0 usecs
[ 23.906822] calling da903x_battery_init+0x0/0x3e @ 1
[ 23.906827] bus: 'platform': add driver da903x-battery
[ 23.907070] initcall da903x_battery_init+0x0/0x3e returned 0 after 0 usecs
[ 23.907075] calling max17040_init+0x0/0x3b @ 1
[ 23.907078] bus: 'i2c': add driver max17040
[ 23.907291] initcall max17040_init+0x0/0x3b returned 0 after 0 usecs
[ 23.907295] calling pcipcwd_init_module+0x0/0x5c @ 1
[ 23.907313] bus: 'pci': add driver pcwd_pci
[ 23.907592] initcall pcipcwd_init_module+0x0/0x5c returned 0 after 0 usecs
[ 23.907596] calling wdtpci_init+0x0/0x42 @ 1
[ 23.907603] bus: 'pci': add driver wdt_pci
[ 23.907864] initcall wdtpci_init+0x0/0x42 returned 0 after 0 usecs
[ 23.907868] calling usb_pcwd_init+0x0/0x70 @ 1
[ 23.907879] bus: 'usb': add driver pcwd_usb
[ 23.908125] usbcore: registered new interface driver pcwd_usb
[ 23.908131] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02
[ 23.908136] initcall usb_pcwd_init+0x0/0x70 returned 0 after 0 usecs
[ 23.908142] calling twl4030_wdt_init+0x0/0x3e @ 1
[ 23.908147] bus: 'platform': add driver twl4030_wdt
[ 23.908361] initcall twl4030_wdt_init+0x0/0x3e returned 0 after 0 usecs
[ 23.908365] calling advwdt_init+0x0/0x83 @ 1
[ 23.908368] WDT driver for Advantech single board computer initialising.
[ 23.908372] bus: 'platform': add driver advantechwdt
[ 23.908622] Registering platform device 'advantechwdt'. Parent at platform
[ 23.908628] device: 'advantechwdt': device_add
[ 23.908641] bus: 'platform': add device advantechwdt
[ 23.908881] bus: 'platform': driver_probe_device: matched device advantechwdt with driver advantechwdt
[ 23.908886] bus: 'platform': really_probe: probing driver advantechwdt with device advantechwdt
[ 23.908908] device: 'watchdog': device_add
[ 23.909178] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[ 23.909182] driver: 'advantechwdt': driver_bound: bound to device 'advantechwdt'
[ 23.909186] bus: 'platform': really_probe: bound device advantechwdt to driver advantechwdt
[ 23.909195] initcall advwdt_init+0x0/0x83 returned 0 after 0 usecs
[ 23.909199] calling watchdog_init+0x0/0x18d @ 1
[ 23.909223] initcall watchdog_init+0x0/0x18d returned -19 after 0 usecs
[ 23.909227] calling alim7101_wdt_init+0x0/0x1b7 @ 1
[ 23.909229] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 23.909239] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[ 23.909243] initcall alim7101_wdt_init+0x0/0x1b7 returned -16 after 0 usecs
[ 23.909246] initcall alim7101_wdt_init+0x0/0x1b7 returned with error code -16
[ 23.909250] calling wafwdt_init+0x0/0x18e @ 1
[ 23.909252] WDT driver for Wafer 5823 single board computer initialising.
[ 23.909259] Wafer 5823 WDT: I/O address 0x0443 already in use
[ 23.909265] initcall wafwdt_init+0x0/0x18e returned -5 after 0 usecs
[ 23.909268] initcall wafwdt_init+0x0/0x18e returned with error code -5
[ 23.909272] calling watchdog_init+0x0/0x8a @ 1
[ 23.909274] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04
[ 23.909278] bus: 'platform': add driver i6300ESB timer
[ 23.909525] Registering platform device 'i6300ESB timer'. Parent at platform
[ 23.909530] device: 'i6300ESB timer': device_add
[ 23.909541] bus: 'platform': add device i6300ESB timer
[ 23.909803] bus: 'platform': driver_probe_device: matched device i6300ESB timer with driver i6300ESB timer
[ 23.909808] bus: 'platform': really_probe: probing driver i6300ESB timer with device i6300ESB timer
[ 23.909849] initcall watchdog_init+0x0/0x8a returned 0 after 0 usecs
[ 23.909853] calling iTCO_wdt_init_module+0x0/0x8a @ 1
[ 23.909855] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 23.909859] bus: 'platform': add driver iTCO_wdt
[ 23.910131] Registering platform device 'iTCO_wdt'. Parent at platform
[ 23.910137] device: 'iTCO_wdt': device_add
[ 23.910148] bus: 'platform': add device iTCO_wdt
[ 23.910399] bus: 'platform': driver_probe_device: matched device iTCO_wdt with driver iTCO_wdt
[ 23.910403] bus: 'platform': really_probe: probing driver iTCO_wdt with device iTCO_wdt
[ 23.910497] iTCO_wdt: No card detected
[ 23.910514] initcall iTCO_wdt_init_module+0x0/0x8a returned 0 after 9765 usecs
[ 23.910518] calling it87_wdt_init+0x0/0x4ee @ 1
[ 23.910597] IT87 WDT: Unsupported Chip found, Chip 8712 Revision 07
[ 23.910601] initcall it87_wdt_init+0x0/0x4ee returned -19 after 0 usecs
[ 23.910605] calling hpwdt_init+0x0/0x42 @ 1
[ 23.910626] bus: 'pci': add driver hpwdt
[ 23.910923] initcall hpwdt_init+0x0/0x42 returned 0 after 0 usecs
[ 23.910927] calling pc87413_init+0x0/0xb5 @ 1
[ 23.910930] pc87413 WDT: Version 1.1 at io 0x2E
[ 23.910934] pc87413 WDT: cannot register miscdev on minor=130 (err=-16)
[ 23.910939] initcall pc87413_init+0x0/0xb5 returned -16 after 0 usecs
[ 23.910943] initcall pc87413_init+0x0/0xb5 returned with error code -16
[ 23.910947] calling sbc60xxwdt_init+0x0/0x1ab @ 1
[ 23.910955] sbc60xxwdt: I/O address 0x0443 already in use
[ 23.910959] initcall sbc60xxwdt_init+0x0/0x1ab returned -5 after 0 usecs
[ 23.910964] initcall sbc60xxwdt_init+0x0/0x1ab returned with error code -5
[ 23.910968] calling sbc8360_init+0x0/0x1ca @ 1
[ 23.910973] sbc8360: failed to register misc device
[ 23.910981] initcall sbc8360_init+0x0/0x1ca returned -16 after 0 usecs
[ 23.910985] initcall sbc8360_init+0x0/0x1ca returned with error code -16
[ 23.910989] calling sch311x_wdt_init+0x0/0x176 @ 1
[ 23.911017] initcall sch311x_wdt_init+0x0/0x176 returned -19 after 0 usecs
[ 23.911022] calling wb_smsc_wdt_init+0x0/0x1de @ 1
[ 23.911024] SMsC 37B787 watchdog component driver 1.1 initialising...
[ 23.912089] smsc37b787_wdt: Unable to register miscdev on minor 130
[ 23.912096] initcall wb_smsc_wdt_init+0x0/0x1de returned -16 after 0 usecs
[ 23.912100] initcall wb_smsc_wdt_init+0x0/0x1de returned with error code -16
[ 23.912105] calling w83877f_wdt_init+0x0/0x183 @ 1
[ 23.912111] w83877f_wdt: I/O address 0x0443 already in use
[ 23.912118] initcall w83877f_wdt_init+0x0/0x183 returned -5 after 0 usecs
[ 23.912122] initcall w83877f_wdt_init+0x0/0x183 returned with error code -5
[ 23.912126] calling watchdog_init+0x0/0xde @ 1
[ 23.912131] epx_c3: cannot register miscdev on minor=130 (err=-16)
[ 23.912137] initcall watchdog_init+0x0/0xde returned -16 after 0 usecs
[ 23.912141] initcall watchdog_init+0x0/0xde returned with error code -16
[ 23.912145] calling watchdog_init+0x0/0xdb @ 1
[ 23.912148] SoftDog: cannot register miscdev on minor=130 (err=-16)
[ 23.912153] initcall watchdog_init+0x0/0xdb returned -16 after 0 usecs
[ 23.912157] initcall watchdog_init+0x0/0xdb returned with error code -16
[ 23.912161] calling telephony_init+0x0/0x71 @ 1
[ 23.912163] Linux telephony interface: v1.00
[ 23.912175] initcall telephony_init+0x0/0x71 returned 0 after 0 usecs
[ 23.912178] calling vhci_init+0x0/0x73 @ 1
[ 23.912181] Bluetooth: Virtual HCI driver ver 1.3
[ 23.912191] device: 'vhci': device_add
[ 23.912476] initcall vhci_init+0x0/0x73 returned 0 after 0 usecs
[ 23.912480] calling hci_uart_init+0x0/0x109 @ 1
[ 23.912483] Bluetooth: HCI UART driver ver 2.2
[ 23.912486] Bluetooth: HCI H4 protocol initialized
[ 23.912489] Bluetooth: HCILL protocol initialized
[ 23.912493] initcall hci_uart_init+0x0/0x109 returned 0 after 0 usecs
[ 23.912497] calling bpa10x_init+0x0/0x55 @ 1
[ 23.912499] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[ 23.912510] bus: 'usb': add driver bpa10x
[ 23.912728] usbcore: registered new interface driver bpa10x
[ 23.912737] initcall bpa10x_init+0x0/0x55 returned 0 after 0 usecs
[ 23.912741] calling bfusb_init+0x0/0x78 @ 1
[ 23.912743] Bluetooth: BlueFRITZ! USB driver ver 1.2
[ 23.912748] bus: 'usb': add driver bfusb
[ 23.912992] usbcore: registered new interface driver bfusb
[ 23.913000] initcall bfusb_init+0x0/0x78 returned 0 after 0 usecs
[ 23.913004] calling btusb_init+0x0/0x55 @ 1
[ 23.913007] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 23.913012] bus: 'usb': add driver btusb
[ 23.913235] usbcore: registered new interface driver btusb
[ 23.913244] initcall btusb_init+0x0/0x55 returned 0 after 0 usecs
[ 23.913248] calling btsdio_init+0x0/0x4c @ 1
[ 23.913250] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 23.913255] bus: 'sdio': add driver btsdio
[ 23.913508] initcall btsdio_init+0x0/0x4c returned 0 after 0 usecs
[ 23.913513] calling isdn_init+0x0/0x35c @ 1
[ 23.916520] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/none/1.1.2.2
[ 23.916536] initcall isdn_init+0x0/0x35c returned 0 after 0 usecs
[ 23.916540] calling isdn_bsdcomp_init+0x0/0x55 @ 1
[ 23.916542] PPP BSD Compression module registered
[ 23.916546] initcall isdn_bsdcomp_init+0x0/0x55 returned 0 after 0 usecs
[ 23.916549] calling divert_init+0x0/0x8a @ 1
[ 23.916583] dss1_divert module successfully installed
[ 23.916587] initcall divert_init+0x0/0x8a returned 0 after 0 usecs
[ 23.916590] calling cpufreq_stats_init+0x0/0xca @ 1
[ 23.916669] initcall cpufreq_stats_init+0x0/0xca returned 0 after 0 usecs
[ 23.916673] calling cpufreq_gov_userspace_init+0x0/0x39 @ 1
[ 23.916678] initcall cpufreq_gov_userspace_init+0x0/0x39 returned 0 after 0 usecs
[ 23.916682] calling cpufreq_gov_dbs_init+0x0/0xd5 @ 1
[ 23.921086] initcall cpufreq_gov_dbs_init+0x0/0xd5 returned 0 after 9765 usecs
[ 23.921091] calling i7300_idle_init+0x0/0x649 @ 1
[ 23.921183] initcall i7300_idle_init+0x0/0x649 returned -19 after 0 usecs
[ 23.921187] calling mmc_test_init+0x0/0x39 @ 1
[ 23.921192] bus: 'mmc': add driver mmc_test
[ 23.923942] initcall mmc_test_init+0x0/0x39 returned 0 after 0 usecs
[ 23.923947] calling sdio_uart_init+0x0/0x11a @ 1
[ 23.923979] bus: 'sdio': add driver sdio_uart
[ 23.924202] initcall sdio_uart_init+0x0/0x11a returned 0 after 0 usecs
[ 23.924207] calling wbsd_drv_init+0x0/0xb5 @ 1
[ 23.924209] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 23.924212] wbsd: Copyright(c) Pierre Ossman
[ 23.924220] bus: 'platform': add driver wbsd
[ 23.924478] Registering platform device 'wbsd'. Parent at platform
[ 23.924484] device: 'wbsd': device_add
[ 23.924498] bus: 'platform': add device wbsd
[ 23.924725] bus: 'platform': driver_probe_device: matched device wbsd with driver wbsd
[ 23.924729] bus: 'platform': really_probe: probing driver wbsd with device wbsd
[ 23.924965] initcall wbsd_drv_init+0x0/0xb5 returned 0 after 0 usecs
[ 23.924969] calling memstick_init+0x0/0xab @ 1
[ 23.925344] bus: 'memstick': registered
[ 23.925347] device class 'memstick_host': registering
[ 23.925592] initcall memstick_init+0x0/0xab returned 0 after 0 usecs
[ 23.925597] calling tifm_ms_init+0x0/0x39 @ 1
[ 23.925601] bus: 'tifm': add driver tifm_ms
[ 23.925821] initcall tifm_ms_init+0x0/0x39 returned 0 after 0 usecs
[ 23.925825] calling bd2802_init+0x0/0x3b @ 1
[ 23.925831] bus: 'i2c': add driver BD2802
[ 23.926080] initcall bd2802_init+0x0/0x3b returned 0 after 0 usecs
[ 23.926085] calling alix_led_init+0x0/0x132 @ 1
[ 23.931221] initcall alix_led_init+0x0/0x132 returned -19 after 9765 usecs
[ 23.931225] calling pca9532_init+0x0/0x3b @ 1
[ 23.931229] bus: 'i2c': add driver pca9532
[ 23.931449] initcall pca9532_init+0x0/0x3b returned 0 after 0 usecs
[ 23.931453] calling gpio_led_init+0x0/0x2d @ 1
[ 23.931457] initcall gpio_led_init+0x0/0x2d returned 0 after 0 usecs
[ 23.931461] calling dac124s085_leds_init+0x0/0x39 @ 1
[ 23.931467] bus: 'spi': add driver dac124s085
[ 23.931710] initcall dac124s085_leds_init+0x0/0x39 returned 0 after 0 usecs
[ 23.931715] calling timer_trig_init+0x0/0x39 @ 1
[ 23.931723] initcall timer_trig_init+0x0/0x39 returned 0 after 0 usecs
[ 23.931727] calling heartbeat_trig_init+0x0/0x39 @ 1
[ 23.931733] initcall heartbeat_trig_init+0x0/0x39 returned 0 after 0 usecs
[ 23.931737] calling gpio_trig_init+0x0/0x39 @ 1
[ 23.931742] initcall gpio_trig_init+0x0/0x39 returned 0 after 0 usecs
[ 23.931746] calling ib_core_init+0x0/0x6a @ 1
[ 23.931748] device class 'infiniband': registering
[ 23.931998] initcall ib_core_init+0x0/0x6a returned 0 after 0 usecs
[ 23.932002] calling ib_mad_init_module+0x0/0xca @ 1
[ 23.932521] initcall ib_mad_init_module+0x0/0xca returned 0 after 0 usecs
[ 23.932525] calling ib_sa_init+0x0/0xc1 @ 1
[ 23.932625] initcall ib_sa_init+0x0/0xc1 returned 0 after 0 usecs
[ 23.932629] calling ib_cm_init+0x0/0x180 @ 1
[ 23.932703] device class 'infiniband_cm': registering
[ 23.950396] initcall ib_cm_init+0x0/0x180 returned 0 after 19531 usecs
[ 23.950402] calling iw_cm_init+0x0/0x5c @ 1
[ 23.950487] initcall iw_cm_init+0x0/0x5c returned 0 after 0 usecs
[ 23.950492] calling addr_init+0x0/0x6d @ 1
[ 23.950628] initcall addr_init+0x0/0x6d returned 0 after 0 usecs
[ 23.950632] calling cma_init+0x0/0x108 @ 1
[ 23.950731] initcall cma_init+0x0/0x108 returned 0 after 0 usecs
[ 23.950735] calling mthca_init+0x0/0x1a7 @ 1
[ 23.950837] bus: 'pci': add driver ib_mthca
[ 23.951197] initcall mthca_init+0x0/0x1a7 returned 0 after 0 usecs
[ 23.951201] calling infinipath_init+0x0/0xe9 @ 1
[ 23.951255] bus: 'pci': add driver ib_ipath
[ 23.951511] initcall infinipath_init+0x0/0xe9 returned 0 after 0 usecs
[ 23.951515] calling c2_init_module+0x0/0x42 @ 1
[ 23.951522] bus: 'pci': add driver c2
[ 23.951801] initcall c2_init_module+0x0/0x42 returned 0 after 0 usecs
[ 23.951805] calling nes_init_module+0x0/0x17f @ 1
[ 23.952051] bus: 'pci': add driver iw_nes
[ 23.952328] initcall nes_init_module+0x0/0x17f returned 0 after 0 usecs
[ 23.952333] calling ipoib_init_module+0x0/0x12d @ 1
[ 23.952464] initcall ipoib_init_module+0x0/0x12d returned 0 after 0 usecs
[ 23.952469] calling srp_init_module+0x0/0x116 @ 1
[ 23.952479] device class 'infiniband_srp': registering
[ 23.952705] initcall srp_init_module+0x0/0x116 returned 0 after 0 usecs
[ 23.952710] calling dcdrbu_init+0x0/0x169 @ 1
[ 23.952733] Registering platform device 'dell_rbu'. Parent at platform
[ 23.952747] device: 'dell_rbu': device_add
[ 23.952762] bus: 'platform': add device dell_rbu
[ 23.953051] initcall dcdrbu_init+0x0/0x169 returned 0 after 0 usecs
[ 23.953056] calling dcdbas_init+0x0/0x8d @ 1
[ 23.953063] bus: 'platform': add driver dcdbas
[ 23.953284] Registering platform device 'dcdbas'. Parent at platform
[ 23.953289] device: 'dcdbas': device_add
[ 23.953300] bus: 'platform': add device dcdbas
[ 23.953552] bus: 'platform': driver_probe_device: matched device dcdbas with driver dcdbas
[ 23.953556] bus: 'platform': really_probe: probing driver dcdbas with device dcdbas
[ 23.953586] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 23.953590] driver: 'dcdbas': driver_bound: bound to device 'dcdbas'
[ 23.953594] bus: 'platform': really_probe: bound device dcdbas to driver dcdbas
[ 23.953602] initcall dcdbas_init+0x0/0x8d returned 0 after 0 usecs
[ 23.953605] calling hifn_init+0x0/0x3e @ 1
[ 23.953607] HIFN supports only 32-bit addresses.
[ 23.953611] initcall hifn_init+0x0/0x3e returned -22 after 0 usecs
[ 23.953614] initcall hifn_init+0x0/0x3e returned with error code -22
[ 23.953618] calling ioat_init_module+0x0/0x42 @ 1
[ 23.953633] bus: 'pci': add driver ioatdma
[ 23.953892] initcall ioat_init_module+0x0/0x42 returned 0 after 0 usecs
[ 23.953897] calling hid_init+0x0/0x55 @ 1
[ 23.954173] bus: 'hid': registered
[ 23.954177] initcall hid_init+0x0/0x55 returned 0 after 0 usecs
[ 23.954183] calling apple_init+0x0/0x63 @ 1
[ 23.954187] bus: 'hid': add driver apple
[ 23.954396] initcall apple_init+0x0/0x63 returned 0 after 0 usecs
[ 23.954401] calling belkin_init+0x0/0x47 @ 1
[ 23.954404] bus: 'hid': add driver belkin
[ 23.954648] initcall belkin_init+0x0/0x47 returned 0 after 0 usecs
[ 23.954652] calling ch_init+0x0/0x47 @ 1
[ 23.954656] bus: 'hid': add driver cherry
[ 23.954864] initcall ch_init+0x0/0x47 returned 0 after 0 usecs
[ 23.954869] calling dr_init+0x0/0x42 @ 1
[ 23.954872] bus: 'hid': add driver dragonrise
[ 23.955141] initcall dr_init+0x0/0x42 returned 0 after 0 usecs
[ 23.955145] calling ez_init+0x0/0x47 @ 1
[ 23.955149] bus: 'hid': add driver ezkey
[ 23.955368] initcall ez_init+0x0/0x47 returned 0 after 0 usecs
[ 23.955372] calling gyration_init+0x0/0x47 @ 1
[ 23.955376] bus: 'hid': add driver gyration
[ 23.955619] initcall gyration_init+0x0/0x47 returned 0 after 0 usecs
[ 23.955623] calling ks_init+0x0/0x47 @ 1
[ 23.955627] bus: 'hid': add driver kensington
[ 23.955837] initcall ks_init+0x0/0x47 returned 0 after 0 usecs
[ 23.955841] calling lg_init+0x0/0x47 @ 1
[ 23.955845] bus: 'hid': add driver logitech
[ 23.956087] initcall lg_init+0x0/0x47 returned 0 after 0 usecs
[ 23.956092] calling ms_init+0x0/0x47 @ 1
[ 23.956096] bus: 'hid': add driver microsoft
[ 23.956318] initcall ms_init+0x0/0x47 returned 0 after 0 usecs
[ 23.956322] calling mr_init+0x0/0x47 @ 1
[ 23.956326] bus: 'hid': add driver monterey
[ 23.956578] initcall mr_init+0x0/0x47 returned 0 after 0 usecs
[ 23.956583] calling ntrig_init+0x0/0x47 @ 1
[ 23.956587] bus: 'hid': add driver ntrig
[ 23.956808] initcall ntrig_init+0x0/0x47 returned 0 after 0 usecs
[ 23.956812] calling sony_init+0x0/0x47 @ 1
[ 23.956816] bus: 'hid': add driver sony
[ 23.957073] initcall sony_init+0x0/0x47 returned 0 after 0 usecs
[ 23.957078] calling sp_init+0x0/0x47 @ 1
[ 23.957082] bus: 'hid': add driver sunplus
[ 23.957292] initcall sp_init+0x0/0x47 returned 0 after 0 usecs
[ 23.957296] calling tm_init+0x0/0x47 @ 1
[ 23.957300] bus: 'hid': add driver thrustmaster
[ 23.957577] initcall tm_init+0x0/0x47 returned 0 after 0 usecs
[ 23.957581] calling ts_init+0x0/0x47 @ 1
[ 23.957585] bus: 'hid': add driver topseed
[ 23.957793] initcall ts_init+0x0/0x47 returned 0 after 0 usecs
[ 23.957798] calling zp_init+0x0/0x47 @ 1
[ 23.957801] bus: 'hid': add driver zeroplus
[ 23.958064] initcall zp_init+0x0/0x47 returned 0 after 0 usecs
[ 23.958068] calling wacom_init+0x0/0x71 @ 1
[ 23.958072] bus: 'hid': add driver wacom
[ 23.958278] wacom driver registered
[ 23.958283] initcall wacom_init+0x0/0x71 returned 0 after 0 usecs
[ 23.958288] calling hid_init+0x0/0xf1 @ 1
[ 23.958419] bus: 'hid': add driver generic-usb
[ 23.958688] bus: 'usb': add driver hiddev
[ 23.958943] usbcore: registered new interface driver hiddev
[ 23.958963] bus: 'usb': add driver usbhid
[ 23.959171] usbcore: registered new interface driver usbhid
[ 23.959177] usbhid: v2.6:USB HID core driver
[ 23.959183] initcall hid_init+0x0/0xf1 returned 0 after 0 usecs
[ 23.959187] calling usb_mouse_init+0x0/0x5e @ 1
[ 23.959192] bus: 'usb': add driver usbmouse
[ 23.959444] usbcore: registered new interface driver usbmouse
[ 23.959451] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[ 23.959456] initcall usb_mouse_init+0x0/0x5e returned 0 after 0 usecs
[ 23.959460] calling virtio_pci_init+0x0/0x7b @ 1
[ 23.959471] device: 'virtio-pci': device_add
[ 23.959505] bus: 'pci': add driver virtio-pci
[ 23.959766] initcall virtio_pci_init+0x0/0x7b returned 0 after 0 usecs
[ 23.959770] calling dell_init+0x0/0x32 @ 1
[ 23.959774] initcall dell_init+0x0/0x32 returned -19 after 0 usecs
[ 23.959778] calling init_soundcore+0x0/0xa5 @ 1
[ 23.959791] device class 'sound': registering
[ 23.960111] initcall init_soundcore+0x0/0xa5 returned 0 after 9765 usecs
[ 23.960116] calling alsa_sound_init+0x0/0xba @ 1
[ 23.960281] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 23.960287] initcall alsa_sound_init+0x0/0xba returned 0 after 0 usecs
[ 23.960291] calling alsa_hwdep_init+0x0/0x8a @ 1
[ 23.960343] initcall alsa_hwdep_init+0x0/0x8a returned 0 after 0 usecs
[ 23.960348] calling alsa_timer_init+0x0/0x1a6 @ 1
[ 23.960405] device: 'timer': device_add
[ 23.960715] initcall alsa_timer_init+0x0/0x1a6 returned 0 after 0 usecs
[ 23.960720] calling rtctimer_init+0x0/0x148 @ 1
[ 23.960728] initcall rtctimer_init+0x0/0x148 returned 0 after 0 usecs
[ 23.960732] calling alsa_pcm_init+0x0/0x92 @ 1
[ 23.960749] initcall alsa_pcm_init+0x0/0x92 returned 0 after 0 usecs
[ 23.960753] calling snd_mem_init+0x0/0x53 @ 1
[ 23.960767] initcall snd_mem_init+0x0/0x53 returned 0 after 0 usecs
[ 23.960771] calling alsa_rawmidi_init+0x0/0xcb @ 1
[ 23.960778] initcall alsa_rawmidi_init+0x0/0xcb returned 0 after 0 usecs
[ 23.960782] calling alsa_mixer_oss_init+0x0/0x63 @ 1
[ 23.960787] initcall alsa_mixer_oss_init+0x0/0x63 returned 0 after 0 usecs
[ 23.960791] calling alsa_pcm_oss_init+0x0/0xc8 @ 1
[ 23.960809] initcall alsa_pcm_oss_init+0x0/0xc8 returned 0 after 0 usecs
[ 23.960813] calling alsa_akm4xxx_module_init+0x0/0x2d @ 1
[ 23.960818] initcall alsa_akm4xxx_module_init+0x0/0x2d returned 0 after 0 usecs
[ 23.960822] calling alsa_tea575x_module_init+0x0/0x2d @ 1
[ 23.960827] initcall alsa_tea575x_module_init+0x0/0x2d returned 0 after 0 usecs
[ 23.960831] calling alsa_i2c_init+0x0/0x2d @ 1
[ 23.960835] initcall alsa_i2c_init+0x0/0x2d returned 0 after 0 usecs
[ 23.960839] calling alsa_opl3_init+0x0/0x2d @ 1
[ 23.960843] initcall alsa_opl3_init+0x0/0x2d returned 0 after 0 usecs
[ 23.960848] calling alsa_mpu401_uart_init+0x0/0x2d @ 1
[ 23.960852] initcall alsa_mpu401_uart_init+0x0/0x2d returned 0 after 0 usecs
[ 23.960856] calling alsa_sb_common_init+0x0/0x2d @ 1
[ 23.960860] initcall alsa_sb_common_init+0x0/0x2d returned 0 after 0 usecs
[ 23.960865] calling alsa_sb16_init+0x0/0x2d @ 1
[ 23.960869] initcall alsa_sb16_init+0x0/0x2d returned 0 after 0 usecs
[ 23.960873] calling alsa_ad1889_init+0x0/0x42 @ 1
[ 23.960890] bus: 'pci': add driver AD1889 Audio
[ 23.961234] initcall alsa_ad1889_init+0x0/0x42 returned 0 after 0 usecs
[ 23.961238] calling alsa_card_als4000_init+0x0/0x42 @ 1
[ 23.961247] bus: 'pci': add driver ALS4000
[ 23.961481] initcall alsa_card_als4000_init+0x0/0x42 returned 0 after 0 usecs
[ 23.961486] calling alsa_card_atiixp_init+0x0/0x42 @ 1
[ 23.961493] bus: 'pci': add driver ATI IXP MC97 controller
[ 23.961757] initcall alsa_card_atiixp_init+0x0/0x42 returned 0 after 0 usecs
[ 23.961762] calling alsa_card_bt87x_init+0x0/0x56 @ 1
[ 23.961770] bus: 'pci': add driver Bt87x
[ 23.962006] initcall alsa_card_bt87x_init+0x0/0x56 returned 0 after 0 usecs
[ 23.962011] calling alsa_card_cmipci_init+0x0/0x42 @ 1
[ 23.962019] bus: 'pci': add driver C-Media PCI
[ 23.962307] initcall alsa_card_cmipci_init+0x0/0x42 returned 0 after 0 usecs
[ 23.962312] calling alsa_card_cs5530_init+0x0/0x42 @ 1
[ 23.962319] bus: 'pci': add driver CS5530_Audio
[ 23.962555] initcall alsa_card_cs5530_init+0x0/0x42 returned 0 after 0 usecs
[ 23.962560] calling alsa_card_es1968_init+0x0/0x42 @ 1
[ 23.962568] bus: 'pci': add driver ES1968 (ESS Maestro)
[ 23.962857] initcall alsa_card_es1968_init+0x0/0x42 returned 0 after 0 usecs
[ 23.962862] calling alsa_card_fm801_init+0x0/0x42 @ 1
[ 23.962870] bus: 'pci': add driver FM801
[ 23.963108] initcall alsa_card_fm801_init+0x0/0x42 returned 0 after 0 usecs
[ 23.963113] calling alsa_card_intel8x0_init+0x0/0x42 @ 1
[ 23.963121] bus: 'pci': add driver Intel ICH
[ 23.963143] bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver Intel ICH
[ 23.963147] bus: 'pci': really_probe: probing driver Intel ICH with device 0000:00:04.0
[ 23.963382] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:1 Active:1)
[ 23.963392] Intel ICH 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 3
[ 23.963441] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 24.300018] intel8x0_measure_ac97_clock: measured 60000 usecs (2936 samples)
[ 24.300021] intel8x0: clocking to 47084
[ 24.300053] device: 'pcmC0D2p': device_add
[ 24.300473] device: 'pcmC0D1c': device_add
[ 24.300774] device: 'adsp': device_add
[ 24.301033] device: 'pcmC0D0p': device_add
[ 24.301292] device: 'pcmC0D0c': device_add
[ 24.301538] device: 'dsp': device_add
[ 24.301809] device: 'audio': device_add
[ 24.302081] device: '0-0:ALC850': device_add
[ 24.302101] bus: 'ac97': add device 0-0:ALC850
[ 24.302361] device: 'controlC0': device_add
[ 24.302664] device: 'mixer': device_add
[ 24.303581] driver: '0000:00:04.0': driver_bound: bound to device 'Intel ICH'
[ 24.303588] bus: 'pci': really_probe: bound device 0000:00:04.0 to driver Intel ICH
[ 24.303833] initcall alsa_card_intel8x0_init+0x0/0x42 returned 0 after 332031 usecs
[ 24.303839] calling alsa_card_m3_init+0x0/0x42 @ 1
[ 24.303862] bus: 'pci': add driver Maestro3
[ 24.304185] initcall alsa_card_m3_init+0x0/0x42 returned 0 after 0 usecs
[ 24.304190] calling alsa_card_rme96_init+0x0/0x42 @ 1
[ 24.304198] bus: 'pci': add driver RME Digi96
[ 24.304433] initcall alsa_card_rme96_init+0x0/0x42 returned 0 after 0 usecs
[ 24.304438] calling alsa_card_via82xx_init+0x0/0x42 @ 1
[ 24.304445] bus: 'pci': add driver VIA 82xx Audio
[ 24.304713] initcall alsa_card_via82xx_init+0x0/0x42 returned 0 after 0 usecs
[ 24.304718] calling alsa_card_via82xx_init+0x0/0x42 @ 1
[ 24.304726] bus: 'pci': add driver VIA 82xx Modem
[ 24.304961] initcall alsa_card_via82xx_init+0x0/0x42 returned 0 after 0 usecs
[ 24.304966] calling alsa_ac97_init+0x0/0x2d @ 1
[ 24.304970] initcall alsa_ac97_init+0x0/0x2d returned 0 after 0 usecs
[ 24.304974] calling alsa_card_ali_init+0x0/0x42 @ 1
[ 24.304982] bus: 'pci': add driver ALI 5451
[ 24.305259] initcall alsa_card_ali_init+0x0/0x42 returned 0 after 0 usecs
[ 24.305264] calling alsa_card_vortex_init+0x0/0x42 @ 1
[ 24.305272] bus: 'pci': add driver au8810
[ 24.305507] initcall alsa_card_vortex_init+0x0/0x42 returned 0 after 0 usecs
[ 24.305512] calling alsa_card_vortex_init+0x0/0x42 @ 1
[ 24.305520] bus: 'pci': add driver au8830
[ 24.305803] initcall alsa_card_vortex_init+0x0/0x42 returned 0 after 0 usecs
[ 24.305808] calling ct_card_init+0x0/0x42 @ 1
[ 24.305815] bus: 'pci': add driver SB-XFi
[ 24.306052] initcall ct_card_init+0x0/0x42 returned 0 after 0 usecs
[ 24.306057] calling alsa_card_ca0106_init+0x0/0x42 @ 1
[ 24.306065] bus: 'pci': add driver CA0106
[ 24.306334] initcall alsa_card_ca0106_init+0x0/0x42 returned 0 after 0 usecs
[ 24.306339] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.306347] bus: 'pci': add driver Echoaudio Darla20
[ 24.306604] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.306609] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.306617] bus: 'pci': add driver Echoaudio Gina20
[ 24.306902] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.306906] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.306915] bus: 'pci': add driver Echoaudio Darla24
[ 24.307150] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.307155] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.307163] bus: 'pci': add driver Echoaudio Layla24
[ 24.307453] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.307458] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.307466] bus: 'pci': add driver Echoaudio Mia
[ 24.307724] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.307729] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.307738] bus: 'pci': add driver Echoaudio Echo3G
[ 24.308010] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.308015] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.308023] bus: 'pci': add driver Echoaudio Indigo DJ
[ 24.308256] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.308261] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.308269] bus: 'pci': add driver Echoaudio Indigo IOx
[ 24.308524] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.308529] calling alsa_card_echo_init+0x0/0x42 @ 1
[ 24.308537] bus: 'pci': add driver Echoaudio Indigo DJx
[ 24.308787] initcall alsa_card_echo_init+0x0/0x42 returned 0 after 0 usecs
[ 24.308792] calling alsa_card_emu10k1_init+0x0/0x42 @ 1
[ 24.308801] bus: 'pci': add driver EMU10K1_Audigy
[ 24.309089] initcall alsa_card_emu10k1_init+0x0/0x42 returned 0 after 0 usecs
[ 24.309094] calling alsa_card_emu10k1x_init+0x0/0x42 @ 1
[ 24.309103] bus: 'pci': add driver EMU10K1X
[ 24.309341] initcall alsa_card_emu10k1x_init+0x0/0x42 returned 0 after 0 usecs
[ 24.309346] calling patch_cmedia_init+0x0/0x39 @ 1
[ 24.309418] initcall patch_cmedia_init+0x0/0x39 returned 0 after 0 usecs
[ 24.309423] calling patch_sigmatel_init+0x0/0x39 @ 1
[ 24.309428] initcall patch_sigmatel_init+0x0/0x39 returned 0 after 0 usecs
[ 24.309432] calling patch_ca0110_init+0x0/0x39 @ 1
[ 24.309437] initcall patch_ca0110_init+0x0/0x39 returned 0 after 0 usecs
[ 24.309441] calling patch_nvhdmi_init+0x0/0x39 @ 1
[ 24.309446] initcall patch_nvhdmi_init+0x0/0x39 returned 0 after 0 usecs
[ 24.309450] calling patch_intelhdmi_init+0x0/0x39 @ 1
[ 24.309455] initcall patch_intelhdmi_init+0x0/0x39 returned 0 after 0 usecs
[ 24.309460] calling alsa_card_azx_init+0x0/0x42 @ 1
[ 24.309471] bus: 'pci': add driver HDA Intel
[ 24.309769] initcall alsa_card_azx_init+0x0/0x42 returned 0 after 0 usecs
[ 24.309774] calling alsa_card_ice1724_init+0x0/0x42 @ 1
[ 24.309782] bus: 'pci': add driver ICE1724
[ 24.310063] initcall alsa_card_ice1724_init+0x0/0x42 returned 0 after 9765 usecs
[ 24.310069] calling alsa_ice1712_akm4xxx_module_init+0x0/0x2d @ 1
[ 24.310073] initcall alsa_ice1712_akm4xxx_module_init+0x0/0x2d returned 0 after 0 usecs
[ 24.310078] calling alsa_card_mixart_init+0x0/0x42 @ 1
[ 24.310088] bus: 'pci': add driver Digigram miXart
[ 24.310380] initcall alsa_card_mixart_init+0x0/0x42 returned 0 after 0 usecs
[ 24.310385] calling alsa_card_nm256_init+0x0/0x42 @ 1
[ 24.310394] bus: 'pci': add driver NeoMagic 256
[ 24.310670] initcall alsa_card_nm256_init+0x0/0x42 returned 0 after 0 usecs
[ 24.310675] calling alsa_card_hifier_init+0x0/0x42 @ 1
[ 24.310683] bus: 'pci': add driver CMI8787HiFier
[ 24.310957] initcall alsa_card_hifier_init+0x0/0x42 returned 0 after 0 usecs
[ 24.310962] calling alsa_card_oxygen_init+0x0/0x42 @ 1
[ 24.310971] bus: 'pci': add driver CMI8788
[ 24.311221] initcall alsa_card_oxygen_init+0x0/0x42 returned 0 after 0 usecs
[ 24.311226] calling alsa_card_xonar_init+0x0/0x42 @ 1
[ 24.311235] bus: 'pci': add driver AV200
[ 24.311518] initcall alsa_card_xonar_init+0x0/0x42 returned 0 after 0 usecs
[ 24.311523] calling pcxhr_module_init+0x0/0x42 @ 1
[ 24.311532] bus: 'pci': add driver Digigram pcxhr
[ 24.311772] initcall pcxhr_module_init+0x0/0x42 returned 0 after 0 usecs
[ 24.311777] calling alsa_card_riptide_init+0x0/0x77 @ 1
[ 24.311785] bus: 'pci': add driver RIPTIDE
[ 24.312071] bus: 'pci': add driver Riptide Joystick
[ 24.312319] initcall alsa_card_riptide_init+0x0/0x77 returned 0 after 0 usecs
[ 24.312325] calling alsa_card_hammerfall_init+0x0/0x42 @ 1
[ 24.312334] bus: 'pci': add driver RME Digi9652 (Hammerfall)
[ 24.312618] initcall alsa_card_hammerfall_init+0x0/0x42 returned 0 after 0 usecs
[ 24.312623] calling alsa_card_hdsp_init+0x0/0x42 @ 1
[ 24.312632] bus: 'pci': add driver RME Hammerfall DSP
[ 24.312897] initcall alsa_card_hdsp_init+0x0/0x42 returned 0 after 0 usecs
[ 24.312902] calling alsa_card_hdspm_init+0x0/0x42 @ 1
[ 24.312911] bus: 'pci': add driver RME Hammerfall DSP MADI
[ 24.313186] initcall alsa_card_hdspm_init+0x0/0x42 returned 0 after 0 usecs
[ 24.313191] calling alsa_card_trident_init+0x0/0x42 @ 1
[ 24.313200] bus: 'pci': add driver Trident4DWaveAudio
[ 24.313440] initcall alsa_card_trident_init+0x0/0x42 returned 0 after 0 usecs
[ 24.313445] calling alsa_card_ymfpci_init+0x0/0x42 @ 1
[ 24.313453] bus: 'pci': add driver Yamaha DS-1 PCI
[ 24.313736] initcall alsa_card_ymfpci_init+0x0/0x42 returned 0 after 0 usecs
[ 24.313741] calling alsa_util_mem_init+0x0/0x2d @ 1
[ 24.313746] initcall alsa_util_mem_init+0x0/0x2d returned 0 after 0 usecs
[ 24.313750] calling snd_usX2Y_module_init+0x0/0x42 @ 1
[ 24.313763] bus: 'usb': add driver snd-usb-usx2y
[ 24.313995] usbcore: registered new interface driver snd-usb-usx2y
[ 24.314005] initcall snd_usX2Y_module_init+0x0/0x42 returned 0 after 0 usecs
[ 24.314009] calling snd_module_init+0x0/0x42 @ 1
[ 24.314015] bus: 'usb': add driver snd-usb-caiaq
[ 24.314261] usbcore: registered new interface driver snd-usb-caiaq
[ 24.314270] initcall snd_module_init+0x0/0x42 returned 0 after 0 usecs
[ 24.314274] calling snd_soc_init+0x0/0x74 @ 1
[ 24.314297] bus: 'platform': add driver soc-audio
[ 24.314533] initcall snd_soc_init+0x0/0x74 returned 0 after 0 usecs
[ 24.314538] calling ad73311_init+0x0/0x39 @ 1
[ 24.314541] No device for DAI AD73311
[ 24.314608] initcall ad73311_init+0x0/0x39 returned 0 after 0 usecs
[ 24.314613] calling ak4104_init+0x0/0x45 @ 1
[ 24.314615] Asahi Kasei AK4104 ALSA SoC Codec Driver
[ 24.314621] bus: 'spi': add driver ak4104
[ 24.314881] initcall ak4104_init+0x0/0x45 returned 0 after 0 usecs
[ 24.314886] calling ak4535_modinit+0x0/0x39 @ 1
[ 24.314889] No device for DAI AK4535
[ 24.314893] initcall ak4535_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.314898] calling cs4270_init+0x0/0x47 @ 1
[ 24.314900] Cirrus Logic CS4270 ALSA SoC Codec Driver
[ 24.314906] bus: 'i2c': add driver cs4270
[ 24.315144] initcall cs4270_init+0x0/0x47 returned 0 after 0 usecs
[ 24.315149] calling pcm3008_init+0x0/0x39 @ 1
[ 24.315151] No device for DAI PCM3008 HiFi
[ 24.315156] initcall pcm3008_init+0x0/0x39 returned 0 after 0 usecs
[ 24.315161] calling dit_modinit+0x0/0x39 @ 1
[ 24.315166] bus: 'platform': add driver spdif-dit
[ 24.315416] initcall dit_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.315421] calling ssm2602_modinit+0x0/0x39 @ 1
[ 24.315424] No device for DAI SSM2602
[ 24.315428] initcall ssm2602_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.315433] calling tlv320aic23_modinit+0x0/0x39 @ 1
[ 24.315436] No device for DAI tlv320aic23
[ 24.315440] initcall tlv320aic23_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.315445] calling aic26_init+0x0/0x39 @ 1
[ 24.315449] bus: 'spi': add driver tlv320aic26
[ 24.315695] initcall aic26_init+0x0/0x39 returned 0 after 0 usecs
[ 24.315699] calling aic3x_modinit+0x0/0x39 @ 1
[ 24.315702] No device for DAI tlv320aic3x
[ 24.315707] initcall aic3x_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.315711] calling twl4030_modinit+0x0/0x3e @ 1
[ 24.315714] No device for DAI twl4030
[ 24.315717] No device for DAI twl4030 Voice
[ 24.315721] initcall twl4030_modinit+0x0/0x3e returned 0 after 0 usecs
[ 24.315726] calling uda134x_init+0x0/0x39 @ 1
[ 24.315728] No device for DAI UDA134X
[ 24.315733] initcall uda134x_init+0x0/0x39 returned 0 after 0 usecs
[ 24.315737] calling uda1380_modinit+0x0/0x3e @ 1
[ 24.315740] No device for DAI UDA1380
[ 24.315743] No device for DAI UDA1380
[ 24.315745] No device for DAI UDA1380
[ 24.315750] initcall uda1380_modinit+0x0/0x3e returned 0 after 0 usecs
[ 24.315754] calling wm8510_modinit+0x0/0x39 @ 1
[ 24.315757] No device for DAI WM8510 HiFi
[ 24.315761] initcall wm8510_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.315766] calling wm8580_modinit+0x0/0x51 @ 1
[ 24.315770] bus: 'i2c': add driver wm8580
[ 24.316018] initcall wm8580_modinit+0x0/0x51 returned 0 after 0 usecs
[ 24.316023] calling wm8728_modinit+0x0/0x39 @ 1
[ 24.316026] No device for DAI WM8728
[ 24.316030] initcall wm8728_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.316035] calling wm8731_modinit+0x0/0x71 @ 1
[ 24.316039] bus: 'i2c': add driver WM8731 I2C Codec
[ 24.316263] bus: 'spi': add driver wm8731
[ 24.316507] initcall wm8731_modinit+0x0/0x71 returned 0 after 0 usecs
[ 24.316513] calling wm8750_modinit+0x0/0x39 @ 1
[ 24.316515] No device for DAI WM8750
[ 24.316520] initcall wm8750_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.316524] calling wm8753_modinit+0x0/0x71 @ 1
[ 24.316529] bus: 'i2c': add driver wm8753
[ 24.316750] bus: 'spi': add driver wm8753
[ 24.316995] initcall wm8753_modinit+0x0/0x71 returned 0 after 0 usecs
[ 24.317001] calling wm8900_modinit+0x0/0x3b @ 1
[ 24.317005] bus: 'i2c': add driver WM8900
[ 24.317240] initcall wm8900_modinit+0x0/0x3b returned 0 after 0 usecs
[ 24.317245] calling wm8903_modinit+0x0/0x3b @ 1
[ 24.317249] bus: 'i2c': add driver WM8903
[ 24.317495] initcall wm8903_modinit+0x0/0x3b returned 0 after 0 usecs
[ 24.317500] calling wm8971_modinit+0x0/0x39 @ 1
[ 24.317503] No device for DAI WM8971
[ 24.317508] initcall wm8971_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.317512] calling wm8940_modinit+0x0/0x59 @ 1
[ 24.317517] bus: 'i2c': add driver WM8940 I2C Codec
[ 24.317733] initcall wm8940_modinit+0x0/0x59 returned 0 after 0 usecs
[ 24.317738] calling wm8960_modinit+0x0/0x59 @ 1
[ 24.317742] bus: 'i2c': add driver WM8960 I2C Codec
[ 24.318009] initcall wm8960_modinit+0x0/0x59 returned 0 after 0 usecs
[ 24.318013] calling wm8988_modinit+0x0/0x79 @ 1
[ 24.318018] bus: 'i2c': add driver WM8988
[ 24.318231] bus: 'spi': add driver wm8988
[ 24.318499] initcall wm8988_modinit+0x0/0x79 returned 0 after 0 usecs
[ 24.318504] calling wm8990_modinit+0x0/0x39 @ 1
[ 24.318506] No device for DAI WM8990 ADC/DAC Primary
[ 24.318512] initcall wm8990_modinit+0x0/0x39 returned 0 after 0 usecs
[ 24.318516] calling wm9081_modinit+0x0/0x59 @ 1
[ 24.318520] bus: 'i2c': add driver wm9081
[ 24.318734] initcall wm9081_modinit+0x0/0x59 returned 0 after 0 usecs
[ 24.318739] calling alsa_sound_last_init+0x0/0x93 @ 1
[ 24.318742] ALSA device list:
[ 24.318744] #0: NVidia CK804 with ALC850 at irq 3
[ 24.318749] initcall alsa_sound_last_init+0x0/0x93 returned 0 after 0 usecs
[ 24.318754] calling flow_cache_init+0x0/0x1c9 @ 1
[ 24.319248] initcall flow_cache_init+0x0/0x1c9 returned 0 after 0 usecs
[ 24.319252] calling llc_init+0x0/0x47 @ 1
[ 24.319258] initcall llc_init+0x0/0x47 returned 0 after 0 usecs
[ 24.319262] calling snap_init+0x0/0x61 @ 1
[ 24.319332] initcall snap_init+0x0/0x61 returned 0 after 0 usecs
[ 24.319336] calling sysctl_ipv4_init+0x0/0x74 @ 1
[ 24.321697] initcall sysctl_ipv4_init+0x0/0x74 returned 0 after 9765 usecs
[ 24.321702] calling ipip_init+0x0/0x95 @ 1
[ 24.321704] IPv4 over IPv4 tunneling driver
[ 24.321802] device: 'tunl0': device_add
[ 24.327530] initcall ipip_init+0x0/0x95 returned 0 after 0 usecs
[ 24.327535] calling ipgre_init+0x0/0xd7 @ 1
[ 24.327537] GRE over IPv4 tunneling driver
[ 24.327572] device: 'gre0': device_add
[ 24.328830] initcall ipgre_init+0x0/0xd7 returned 0 after 0 usecs
[ 24.328834] calling ah4_init+0x0/0x8f @ 1
[ 24.328839] initcall ah4_init+0x0/0x8f returned 0 after 0 usecs
[ 24.328842] calling ipcomp4_init+0x0/0x8f @ 1
[ 24.328846] initcall ipcomp4_init+0x0/0x8f returned 0 after 0 usecs
[ 24.328850] calling ipip_init+0x0/0xc5 @ 1
[ 24.328855] initcall ipip_init+0x0/0xc5 returned 0 after 0 usecs
[ 24.328859] calling tunnel4_init+0x0/0x8f @ 1
[ 24.328863] initcall tunnel4_init+0x0/0x8f returned 0 after 0 usecs
[ 24.328866] calling xfrm4_mode_tunnel_init+0x0/0x3e @ 1
[ 24.328870] initcall xfrm4_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs
[ 24.328874] calling tcp_westwood_register+0x0/0x39 @ 1
[ 24.328878] TCP westwood registered
[ 24.328881] initcall tcp_westwood_register+0x0/0x39 returned 0 after 0 usecs
[ 24.328884] calling hstcp_register+0x0/0x39 @ 1
[ 24.328887] TCP highspeed registered
[ 24.328890] initcall hstcp_register+0x0/0x39 returned 0 after 0 usecs
[ 24.328894] calling hybla_register+0x0/0x39 @ 1
[ 24.328896] TCP hybla registered
[ 24.328899] initcall hybla_register+0x0/0x39 returned 0 after 0 usecs
[ 24.328902] calling htcp_register+0x0/0x39 @ 1
[ 24.328905] TCP htcp registered
[ 24.328908] initcall htcp_register+0x0/0x39 returned 0 after 0 usecs
[ 24.328911] calling tcp_vegas_register+0x0/0x3b @ 1
[ 24.328914] TCP vegas registered
[ 24.328917] initcall tcp_vegas_register+0x0/0x3b returned 0 after 0 usecs
[ 24.328921] calling tcp_veno_register+0x0/0x3b @ 1
[ 24.328923] TCP veno registered
[ 24.328926] initcall tcp_veno_register+0x0/0x3b returned 0 after 0 usecs
[ 24.328930] calling tcp_scalable_register+0x0/0x39 @ 1
[ 24.328932] TCP scalable registered
[ 24.328936] initcall tcp_scalable_register+0x0/0x39 returned 0 after 0 usecs
[ 24.328939] calling tcp_yeah_register+0x0/0x3b @ 1
[ 24.328942] TCP yeah registered
[ 24.328945] initcall tcp_yeah_register+0x0/0x3b returned 0 after 0 usecs
[ 24.328948] calling inet6_init+0x0/0x2ec @ 1
[ 24.331725] NET: Registered protocol family 10
[ 24.335890] lo: Disabled Privacy Extensions
[ 24.344751] tunl0: Disabled Privacy Extensions
[ 24.348036] initcall inet6_init+0x0/0x2ec returned 0 after 19531 usecs
[ 24.348041] calling ah6_init+0x0/0x8f @ 1
[ 24.348047] initcall ah6_init+0x0/0x8f returned 0 after 0 usecs
[ 24.348051] calling xfrm6_mode_tunnel_init+0x0/0x3e @ 1
[ 24.348056] initcall xfrm6_mode_tunnel_init+0x0/0x3e returned 0 after 0 usecs
[ 24.348059] calling xfrm6_ro_init+0x0/0x3e @ 1
[ 24.348063] initcall xfrm6_ro_init+0x0/0x3e returned 0 after 0 usecs
[ 24.348067] calling xfrm6_beet_init+0x0/0x3e @ 1
[ 24.348071] initcall xfrm6_beet_init+0x0/0x3e returned 0 after 0 usecs
[ 24.348075] calling mip6_init+0x0/0xe1 @ 1
[ 24.348077] Mobile IPv6
[ 24.348081] initcall mip6_init+0x0/0xe1 returned 0 after 0 usecs
[ 24.348085] calling sit_init+0x0/0x95 @ 1
[ 24.348087] IPv6 over IPv4 tunneling driver
[ 24.348136] device: 'sit0': device_add
[ 24.350627] sit0: Disabled Privacy Extensions
[ 24.352082] initcall sit_init+0x0/0x95 returned 0 after 9765 usecs
[ 24.352087] calling packet_init+0x0/0x6d @ 1
[ 24.352092] NET: Registered protocol family 17
[ 24.352176] initcall packet_init+0x0/0x6d returned 0 after 0 usecs
[ 24.352180] calling ipsec_pfkey_init+0x0/0xac @ 1
[ 24.352184] NET: Registered protocol family 15
[ 24.352215] initcall ipsec_pfkey_init+0x0/0xac returned 0 after 0 usecs
[ 24.352219] calling br_init+0x0/0xd3 @ 1
[ 24.352818] initcall br_init+0x0/0xd3 returned 0 after 0 usecs
[ 24.352822] calling dsa_init_module+0x0/0x3b @ 1
[ 24.352827] initcall dsa_init_module+0x0/0x3b returned 0 after 0 usecs
[ 24.352831] calling edsa_init_module+0x0/0x3b @ 1
[ 24.352835] initcall edsa_init_module+0x0/0x3b returned 0 after 0 usecs
[ 24.352839] calling mv88e6123_61_65_init+0x0/0x3b @ 1
[ 24.352855] initcall mv88e6123_61_65_init+0x0/0x3b returned 0 after 0 usecs
[ 24.352859] calling mv88e6131_init+0x0/0x3b @ 1
[ 24.352863] initcall mv88e6131_init+0x0/0x3b returned 0 after 0 usecs
[ 24.352867] calling dsa_init_module+0x0/0x39 @ 1
[ 24.352876] bus: 'platform': add driver dsa
[ 24.353117] initcall dsa_init_module+0x0/0x39 returned 0 after 0 usecs
[ 24.353122] calling atalk_init+0x0/0xb3 @ 1
[ 24.353126] NET: Registered protocol family 5
[ 24.390282] initcall atalk_init+0x0/0xb3 returned 0 after 39062 usecs
[ 24.390287] calling x25_init+0x0/0x85 @ 1
[ 24.390291] NET: Registered protocol family 9
[ 24.390295] X.25 for Linux Version 0.2
[ 24.390526] initcall x25_init+0x0/0x85 returned 0 after 0 usecs
[ 24.390531] calling nr_proto_init+0x0/0x273 @ 1
[ 24.390555] device: 'nr0': device_add
[ 24.392441] device: 'nr1': device_add
[ 24.394139] device: 'nr2': device_add
[ 24.395896] device: 'nr3': device_add
[ 24.397650] NET: Registered protocol family 6
[ 24.398156] initcall nr_proto_init+0x0/0x273 returned 0 after 0 usecs
[ 24.398160] calling ax25_init+0x0/0xd3 @ 1
[ 24.398164] NET: Registered protocol family 3
[ 24.398243] initcall ax25_init+0x0/0xd3 returned 0 after 0 usecs
[ 24.398247] calling can_init+0x0/0x141 @ 1
[ 24.398249] can: controller area network core (rev 20090105 abi 8)
[ 24.398897] NET: Registered protocol family 29
[ 24.398908] initcall can_init+0x0/0x141 returned 0 after 0 usecs
[ 24.398913] calling irnet_init+0x0/0x42 @ 1
[ 24.398977] device: 'irnet': device_add
[ 24.399238] initcall irnet_init+0x0/0x42 returned 0 after 0 usecs
[ 24.399242] calling l2cap_init+0x0/0x10a @ 1
[ 24.399271] Bluetooth: L2CAP ver 2.13
[ 24.399273] Bluetooth: L2CAP socket layer initialized
[ 24.399277] initcall l2cap_init+0x0/0x10a returned 0 after 0 usecs
[ 24.399282] calling hidp_init+0x0/0x81 @ 1
[ 24.399285] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 24.399291] bus: 'hid': add driver generic-bluetooth
[ 24.399550] initcall hidp_init+0x0/0x81 returned 0 after 0 usecs
[ 24.399554] calling decnet_init+0x0/0xaf @ 1
[ 24.399557] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 24.401727] DECnet: Routing cache hash table of 1024 buckets, 56Kbytes
[ 24.401798] NET: Registered protocol family 12
[ 24.402221] initcall decnet_init+0x0/0xaf returned 0 after 9765 usecs
[ 24.402226] calling econet_proto_init+0x0/0x1fb @ 1
[ 24.402230] NET: Registered protocol family 19
[ 24.402371] initcall econet_proto_init+0x0/0x1fb returned 0 after 0 usecs
[ 24.402376] calling phonet_init+0x0/0x9e @ 1
[ 24.402393] NET: Registered protocol family 35
[ 24.403082] initcall phonet_init+0x0/0x9e returned 0 after 0 usecs
[ 24.403087] calling pep_register+0x0/0x3e @ 1
[ 24.403519] initcall pep_register+0x0/0x3e returned 0 after 0 usecs
[ 24.403523] calling vlan_proto_init+0x0/0xeb @ 1
[ 24.403527] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 24.403530] All bugs added by David S. Miller <davem@redhat.com>
[ 24.403596] initcall vlan_proto_init+0x0/0xeb returned 0 after 0 usecs
[ 24.403601] calling sctp_init+0x0/0x82d @ 1
[ 24.406583] SCTP: Hash tables configured (established 18724 bind 18724)
[ 24.408512] sctp_init_sock(sk: ffff88003cb08000)
[ 24.408611] initcall sctp_init+0x0/0x82d returned 0 after 0 usecs
[ 24.408616] calling lib80211_init+0x0/0x45 @ 1
[ 24.408618] lib80211: common routines for IEEE802.11 drivers
[ 24.408634] lib80211_crypt: registered algorithm 'NULL'
[ 24.408638] initcall lib80211_init+0x0/0x45 returned 0 after 0 usecs
[ 24.408642] calling lib80211_crypto_wep_init+0x0/0x39 @ 1
[ 24.408646] lib80211_crypt: registered algorithm 'WEP'
[ 24.408650] initcall lib80211_crypto_wep_init+0x0/0x39 returned 0 after 0 usecs
[ 24.408654] calling lib80211_crypto_ccmp_init+0x0/0x39 @ 1
[ 24.408657] lib80211_crypt: registered algorithm 'CCMP'
[ 24.408661] initcall lib80211_crypto_ccmp_init+0x0/0x39 returned 0 after 0 usecs
[ 24.408665] calling lib80211_crypto_tkip_init+0x0/0x39 @ 1
[ 24.408668] lib80211_crypt: registered algorithm 'TKIP'
[ 24.408672] initcall lib80211_crypto_tkip_init+0x0/0x39 returned 0 after 0 usecs
[ 24.408676] calling tipc_init+0x0/0xdf @ 1
[ 24.408692] TIPC: Activated (version 1.6.4 compiled Aug 2 2009 22:49:36)
[ 24.411036] NET: Registered protocol family 30
[ 24.411040] TIPC: Started in single node mode
[ 24.411049] initcall tipc_init+0x0/0xdf returned 0 after 9765 usecs
[ 24.411054] calling dcbnl_init+0x0/0x59 @ 1
[ 24.411059] initcall dcbnl_init+0x0/0x59 returned 0 after 0 usecs
[ 24.411063] calling wimax_subsys_init+0x0/0x25a @ 1
[ 24.430153] initcall wimax_subsys_init+0x0/0x25a returned 0 after 19531 usecs
[ 24.430158] calling severities_debugfs_init+0x0/0x83 @ 1
[ 24.430184] initcall severities_debugfs_init+0x0/0x83 returned 0 after 0 usecs
[ 24.430188] calling cpufreq_p4_init+0x0/0x82 @ 1
[ 24.430192] initcall cpufreq_p4_init+0x0/0x82 returned -19 after 0 usecs
[ 24.430196] calling update_mp_table+0x0/0x689 @ 1
[ 24.430200] initcall update_mp_table+0x0/0x689 returned 0 after 0 usecs
[ 24.430204] calling lapic_insert_resource+0x0/0x67 @ 1
[ 24.430211] initcall lapic_insert_resource+0x0/0x67 returned 0 after 0 usecs
[ 24.430215] calling io_apic_bug_finalize+0x0/0x42 @ 1
[ 24.430219] initcall io_apic_bug_finalize+0x0/0x42 returned 0 after 0 usecs
[ 24.430223] calling check_early_ioremap_leak+0x0/0x8e @ 1
[ 24.430228] initcall check_early_ioremap_leak+0x0/0x8e returned 0 after 0 usecs
[ 24.430232] calling sched_init_debug+0x0/0x4b @ 1
[ 24.430243] initcall sched_init_debug+0x0/0x4b returned 0 after 0 usecs
[ 24.430247] calling init_oops_id+0x0/0x5d @ 1
[ 24.430251] initcall init_oops_id+0x0/0x5d returned 0 after 0 usecs
[ 24.430255] calling disable_boot_consoles+0x0/0xf3 @ 1
[ 24.430259] initcall disable_boot_consoles+0x0/0xf3 returned 0 after 0 usecs
[ 24.430263] calling pm_qos_power_init+0x0/0xf0 @ 1
[ 24.430277] device: 'cpu_dma_latency': device_add
[ 24.430572] device: 'network_latency': device_add
[ 24.430796] device: 'network_throughput': device_add
[ 24.431028] initcall pm_qos_power_init+0x0/0xf0 returned 0 after 0 usecs
[ 24.431033] calling clear_boot_tracer+0x0/0x52 @ 1
[ 24.431037] initcall clear_boot_tracer+0x0/0x52 returned 0 after 0 usecs
[ 24.431042] calling max_swapfiles_check+0x0/0x2d @ 1
[ 24.431047] initcall max_swapfiles_check+0x0/0x2d returned 0 after 0 usecs
[ 24.431052] calling random32_reseed+0x0/0xce @ 1
[ 24.431070] initcall random32_reseed+0x0/0xce returned 0 after 0 usecs
[ 24.431075] calling pci_resource_alignment_sysfs_init+0x0/0x40 @ 1
[ 24.431085] initcall pci_resource_alignment_sysfs_init+0x0/0x40 returned 0 after 0 usecs
[ 24.431089] calling pci_sysfs_init+0x0/0x77 @ 1
[ 24.431401] initcall pci_sysfs_init+0x0/0x77 returned 0 after 0 usecs
[ 24.431405] calling seqgen_init+0x0/0x36 @ 1
[ 24.431425] initcall seqgen_init+0x0/0x36 returned 0 after 0 usecs
[ 24.431429] calling hd_init+0x0/0x321 @ 1
[ 24.431478] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[ 24.431629] initcall hd_init+0x0/0x321 returned -1 after 0 usecs
[ 24.431633] initcall hd_init+0x0/0x321 returned with error code -1
[ 24.431639] calling scsi_complete_async_scans+0x0/0x13b @ 1
[ 24.431643] initcall scsi_complete_async_scans+0x0/0x13b returned 0 after 0 usecs
[ 24.431647] calling edd_init+0x0/0x386 @ 1
[ 24.431650] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 24.431652] EDD information not available.
[ 24.431656] initcall edd_init+0x0/0x386 returned -19 after 0 usecs
[ 24.431659] calling memmap_init+0x0/0xce @ 1
[ 24.431778] initcall memmap_init+0x0/0xce returned 0 after 0 usecs
[ 24.431781] calling dmatest_init+0x0/0x16c @ 1
[ 24.431802] initcall dmatest_init+0x0/0x16c returned 0 after 0 usecs
[ 24.431806] calling tcp_congestion_default+0x0/0x39 @ 1
[ 24.431811] initcall tcp_congestion_default+0x0/0x39 returned 0 after 0 usecs
[ 24.431815] calling ip_auto_config+0x0/0xf1d @ 1
[ 24.431842] initcall ip_auto_config+0x0/0xf1d returned 0 after 0 usecs
[ 24.431846] calling initialize_hashrnd+0x0/0x40 @ 1
[ 24.431854] initcall initialize_hashrnd+0x0/0x40 returned 0 after 0 usecs
[ 24.431894] async_waiting @ 1
[ 24.431897] async_continuing @ 1 after 0 usec
[ 29.297460] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.300255] EXT3-fs: write access will be enabled during recovery.
[ 29.345899] kjournald starting. Commit interval 5 seconds
[ 29.350055] EXT3-fs: recovery complete.
[ 29.354793] EXT3-fs: mounted filesystem with writeback data mode.
[ 29.360101] VFS: Mounted root (ext3 filesystem) readonly on device 8:6.
[ 29.366790] async_waiting @ 1
[ 29.370004] async_continuing @ 1 after 0 usec
[ 29.374355] debug: unmapping init memory ffffffff828ac000..ffffffff82985000
[ 29.380094] Write protecting the kernel read-only data: 22020k
[ 29.390362] Testing CPA: undo ffffffff81009000-ffffffff8258a000
[ 29.397211] Testing CPA: again
[ 29.397780] bus: 'serio': really_probe: probing driver atkbd with device serio0
[ 29.432248] device: 'input0': device_add
[ 29.447136] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
[ 29.464851] input: AT Translated Set 2 keyboard as /class/input/input0
[ 29.464851] device: 'event0': device_add
[ 29.474693] evbug.c: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 29.480032] driver: 'serio0': driver_bound: bound to device 'atkbd'
[ 29.486339] bus: 'serio': really_probe: bound device serio0 to driver atkbd
[ 29.487052] device: 'serio1': device_add
[ 29.490012] bus: 'serio': add device serio1
[ 29.504888] bus: 'serio': driver_probe_device: matched device serio1 with driver atkbd
[ 29.504888] bus: 'serio': really_probe: probing driver atkbd with device serio1
[ 29.525961] bus: 'serio': driver_probe_device: matched device serio1 with driver psmouse
[ 29.530000] bus: 'serio': really_probe: probing driver psmouse with device serio1
Mount failed for selinuxfs on /selinux: No such device
INIT: version 2.86 booting
Welcome to Fedora
Press 'I' to enter interactive startup.
[ 30.915335] device: 'input1': device_add
[ 30.930122] input: ImPS/2 Generic Wheel Mouse as /class/input/input1
[ 30.930122] device: 'mouse0': device_add
[ 30.940546] device: 'event1': device_add
[ 30.945070] evbug.c: Connected device: input1 (ImPS/2 Generic Wheel Mouse at isa0060/serio1/input0)
[ 30.945070] driver: 'serio1': driver_bound: bound to device 'psmouse'
[ 30.950012] bus: 'serio': really_probe: bound device serio1 to driver psmouse
Setting clock (localtime): Mon Aug 3 02:49:22 CEST 2009 [ OK ]
Starting udev: /sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory
/sbin/start_udev: line 85: cannot redirect standard input from /dev/null: No such file or directory
/sbin/start_udev: line 187: /proc/sys/kernel/hotplug: No such file or directory
[ 34.989808] CPA self-test:
[ 35.002100] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[ 35.028029] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[ 35.055923] 4k 262128 large 0 gb 0 x 262128[ffff880000000000-ffff88003ffef000] miss 0
[ 35.059899] ok.
[ 36.010887] eth1: link down
[ 36.010887] device: 'bpq0': device_add
[ 36.021765] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 36.075293] device: 'bpq1': device_add
[ 37.270073] IPv4 FIB: Using LC-trie version 0.408
[ OK ]
Loading default keymap (us): [ OK ]
Setting hostname mercury: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda6
/1: Superblock last mount time is in the future. FIXED.
/1: Superblock last write time is in the future. FIXED.
/1: clean, 375369/7325696 files, 3524827/7325632 blocks
[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/sda5
/home: recovering journal
/home: Superblock last mount time is in the future. FIXED.
/home: clean, 134936/6111232 files, 2541855/12209392 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ 43.092507] EXT3 FS on sda6, internal journal
[ OK ]
Mounting local filesystems: [ 43.208424] kjournald starting. Commit interval 5 seconds
[ 43.211002] EXT3 FS on sda5, internal journal
[ 43.211002] EXT3-fs: mounted filesystem with writeback data mode.
[ OK ]
Enabling local filesystem quotas: [ OK ]
Enabling /etc/fstab swaps: [ 44.106716] Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k
[ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Starting system message bus: [ 45.537838] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
next prev parent reply other threads:[~2009-08-03 7:06 UTC|newest]
Thread overview: 1150+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-24 8:09 [patch] perf tools: allow top users to switch between weighted and individual counter display Mike Galbraith
2009-07-24 8:58 ` Peter Zijlstra
2009-07-24 10:37 ` Mike Galbraith
2009-08-02 20:00 ` Ingo Molnar
2009-08-03 5:09 ` Mike Galbraith
2009-08-04 8:21 ` Mike Galbraith
2009-08-04 8:24 ` [patch] perf tools: update perf top man page Mike Galbraith
[not found] ` <new-submission>
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: stop command line recording when tracing is disabled Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: replace the crude (unsigned) -1 hackery Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: fix trace_find_cmdline() Thomas Gleixner
2009-03-18 9:18 ` [tip:tracing/tasks] tracing: fix command line to pid reverse map Carsten Emde
2009-03-29 22:24 ` [tip:x86/mm] x86/mm: further cleanups of fault.c's include file section Ingo Molnar
2009-03-30 12:06 ` Ingo Molnar
2009-04-01 10:15 ` [tip:perfcounters/core] perf_counter tools: kerneltop: add real-time data acquisition thread Mike Galbraith
2009-05-04 17:33 ` [tip:perfcounters/core] perf_counter: round-robin per-CPU counters too tip-bot for Ingo Molnar
2009-05-04 17:33 ` [tip:perfcounters/core] perf_counter: initialize the per-cpu context earlier tip-bot for Ingo Molnar
2009-05-04 17:34 ` [tip:perfcounters/core] perf_counter: convert perf_resource_mutex to a spinlock tip-bot for Ingo Molnar
[not found] ` <tip-48dd0fed90e2b1f1ba87401439b85942181c6df3@git.kernel.org>
2009-05-06 14:24 ` [tip:tracing/core] tracing: trace_output.c, fix false positive compiler warning Steven Rostedt
2009-05-06 14:36 ` Ingo Molnar
2009-05-06 14:49 ` Steven Rostedt
2009-05-06 14:51 ` [tip:tracing/core] tracing: small trave_events sample Makefile cleanup tip-bot for Christoph Hellwig
2009-05-07 9:19 ` [tip:x86/cleanups] x86: clean up arch/x86/kernel/tsc_sync.c a bit tip-bot for Ingo Molnar
2009-05-11 9:53 ` [tip:x86/apic] x86: apic: Check rev 3 fadt correctly for physical_apic bit tip-bot for Yinghai Lu
2009-05-11 9:53 ` [tip:x86/cpufeature] x86: clean up and fix setup_clear/force_cpu_cap handling tip-bot for Yinghai Lu
2009-05-11 10:10 ` [tip:perfcounters/core] perf_counter, x86: clean up throttling printk tip-bot for Mike Galbraith
2009-05-12 14:33 ` [tip:core/urgent] lockdep: increase MAX_LOCKDEP_ENTRIES tip-bot for Ingo Molnar
2009-05-12 18:27 ` [tip:core/urgent] lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS tip-bot for Ingo Molnar
2009-05-13 6:21 ` [tip:perfcounters/core] perf_counter: fix print debug irq disable tip-bot for Peter Zijlstra
2009-05-13 13:52 ` [tip:x86/urgent] xen: use header for EXPORT_SYMBOL_GPL tip-bot for Randy Dunlap
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: More accurate counter update tip-bot for Peter Zijlstra
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: Fix throttling tip-bot for Ingo Molnar
2009-05-15 8:42 ` [tip:perfcounters/core] perf_counter: x86: Allow unpriviliged use of NMIs tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: Fix perf_output_copy() WARN to account for overflow tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Fix up the amd NMI/INT throttle tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: Rework the perf counter disable/enable tip-bot for Peter Zijlstra
2009-05-15 11:05 ` Paul Mackerras
2009-05-15 11:23 ` Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Robustify interrupt handling tip-bot for Peter Zijlstra
2009-05-15 8:43 ` [tip:perfcounters/core] perf_counter: x86: Disallow interval of 1 tip-bot for Ingo Molnar
2009-05-15 8:44 ` [tip:perfcounters/core] perf_counter: x86: Protect against infinite loops in intel_pmu_handle_irq() tip-bot for Ingo Molnar
2009-05-15 8:44 ` [tip:perfcounters/core] perf_counter: Remove ACPI quirk tip-bot for Ingo Molnar
2009-05-15 10:12 ` [tip:perfcounters/core] perf stat: handle Ctrl-C tip-bot for Ingo Molnar
2009-05-28 11:09 ` Paul Mackerras
2009-05-28 12:19 ` Peter Zijlstra
2009-05-29 9:06 ` Ingo Molnar
2009-05-18 7:40 ` [tip:perfcounters/core] perf_counter, x86: speed up the scheduling fast-path tip-bot for Ingo Molnar
2009-05-20 18:15 ` [tip:perfcounters/core] perf_counter: Fix context removal deadlock tip-bot for Ingo Molnar
2009-05-22 16:21 ` [tip:perfcounters/core] perf_counter tools: increase limits tip-bot for Ingo Molnar
2009-05-24 7:02 ` [tip:perfcounters/core] perf top: fix segfault tip-bot for Mike Galbraith
2009-05-25 3:39 ` [tip:perfcounters/core] perf_counter: Increase mmap limit tip-bot for Ingo Molnar
2009-05-25 8:03 ` [tip:perfcounters/core] perf_counter tools: increase limits, fix tip-bot for Ingo Molnar
2009-05-25 11:03 ` [tip:perfcounters/core] perf top: Reduce display overhead tip-bot for Mike Galbraith
2009-05-25 11:06 ` [tip:perfcounters/core] perf_counter: Move child perfcounter init to after scheduler init tip-bot for Ingo Molnar
2009-05-25 12:45 ` [tip:perfcounters/core] perf stat: flip around ':k' and ':u' flags tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter, x86: Fix APIC NMI programming tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter, x86: Make NMI lockups more robust tip-bot for Ingo Molnar
2009-05-26 7:57 ` [tip:perfcounters/core] perf_counter: Initialize ->oncpu properly tip-bot for Ingo Molnar
2009-05-26 10:33 ` [tip:perfcounters/core] perf record: Straighten out argv types tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf stat: Remove unused variable tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf record: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 10:34 ` [tip:perfcounters/core] perf_counter tools: Librarize event string parsing tip-bot for Ingo Molnar
2009-05-26 11:03 ` [tip:perfcounters/core] perf stat: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 11:36 ` [tip:perfcounters/core] perf top: " tip-bot for Ingo Molnar
2009-05-26 12:12 ` [tip:perfcounters/core] perf_counter: First part of 'perf report' conversion to C + elfutils tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:12 ` [tip:perfcounters/core] perf_counter tools: remove the standalone perf-report utility tip-bot for Ingo Molnar
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Implement dso__load using libelf tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Use rb_trees in perf report tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Add our private copy of list.h tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:13 ` [tip:perfcounters/core] perf_counter: Use rb_tree for symhists and threads in report tip-bot for Arnaldo Carvalho de Melo
2009-05-26 12:14 ` [tip:perfcounters/core] perf record: Convert to Git option parsing tip-bot for Ingo Molnar
2009-05-26 12:15 ` [tip:perfcounters/core] perf report: Add help/manpage tip-bot for Ingo Molnar
2009-05-26 13:27 ` [tip:perfcounters/core] perf top: Remove leftover NMI/IRQ bits tip-bot for Mike Galbraith
2009-05-26 13:27 ` [tip:perfcounters/core] perf top: fix typo in -d option tip-bot for Mike Galbraith
2009-05-26 14:24 ` [tip:perfcounters/core] perf report: Fix ELF symbol parsing tip-bot for Peter Zijlstra
2009-05-26 14:24 ` [tip:perfcounters/core] perf report: Fix kernel symbol resolution tip-bot for Arnaldo Carvalho de Melo
2009-05-26 15:21 ` [PATCH 1/1 tip] perf: Don't assume /proc/kallsyms is ordered Arnaldo Carvalho de Melo
2009-05-26 15:39 ` [tip:perfcounters/core] " tip-bot for Arnaldo Carvalho de Melo
2009-05-26 17:56 ` [PATCH 1/1 tip] " Peter Zijlstra
2009-05-26 17:54 ` [tip:perfcounters/core] perf report: add --dump-raw-trace option tip-bot for Ingo Molnar
2009-05-26 18:09 ` [tip:perfcounters/core] perf report: add counter for unknown events tip-bot for Ingo Molnar
2009-05-26 18:09 ` [tip:perfcounters/core] perf report: add more debugging tip-bot for Ingo Molnar
2009-05-26 18:21 ` tip-bot for Ingo Molnar
2009-05-26 19:21 ` [tip:perfcounters/core] perf report: More robust error handling tip-bot for Peter Zijlstra
2009-05-27 7:36 ` [tip:perfcounters/core] perf_counter tools: Rename output.perf to perf.data tip-bot for Ingo Molnar
2009-05-27 9:06 ` [tip:perfcounters/core] perf_counter tools: Add built-in pager support tip-bot for Ingo Molnar
2009-05-27 10:33 ` [tip:perfcounters/core] perf record: Fix the profiling of existing pid or whole box tip-bot for Mike Galbraith
2009-05-27 11:24 ` [tip:perfcounters/core] perf report: Remove <ctype.h> include tip-bot for Ingo Molnar
2009-05-27 13:03 ` [tip:perfcounters/core] perf_counter: tools: /usr/lib/debug%s.debug support tip-bot for Peter Zijlstra
2009-05-27 21:25 ` [tip:perfcounters/core] pref_counter: tools: report: Robustify in case of weird events tip-bot for Ingo Molnar
2009-05-28 9:46 ` [tip:perfcounters/core] perf_counter: Fix perf_counter_init_task() on !CONFIG_PERF_COUNTERS tip-bot for Ingo Molnar
2009-05-28 10:00 ` [tip:perfcounters/core] perf_counter tools: report: Implement header output for --sort variants tip-bot for Peter Zijlstra
2009-05-28 10:00 ` [tip:perfcounters/core] perf_counter tools: report: Add help text for --sort tip-bot for Ingo Molnar
2009-05-28 22:03 ` [tip:perfcounters/core] perf_counter tools: Document '--' option parsing terminator tip-bot for Mike Galbraith
2009-05-29 7:06 ` [tip:perfcounters/core] perf_counter tools: Fix top symbol table dump typo tip-bot for Mike Galbraith
2009-05-29 7:07 ` [tip:perfcounters/core] perf_counter tools: Fix top symbol table max_ip typo tip-bot for Mike Galbraith
2009-05-29 9:00 ` [tip:perfcounters/core] perf_counter tools: Clean up builtin-stat.c's do_perfstat() tip-bot for Ingo Molnar
2009-05-29 9:00 ` [tip:perfcounters/core] perf_counter tools: Split display into reading and printing tip-bot for Ingo Molnar
2009-05-29 9:01 ` [tip:perfcounters/core] perf_counter tools: Also display time-normalized stat results tip-bot for Ingo Molnar
2009-05-29 12:27 ` [tip:perfcounters/core] perf_counter: Fix cpuctx->task_ctx races tip-bot for Ingo Molnar
2009-05-29 12:27 ` [tip:perfcounters/core] perf_counter: Robustify counter-free logic tip-bot for Ingo Molnar
2009-05-29 17:15 ` [tip:sched/core] ftrace: fix typo about map of kernel priority in ftrace.txt file tip-bot for GeunSik Lim
2009-05-29 17:15 ` [tip:sched/core] sched: fix typo in sched-rt-group.txt file tip-bot for GeunSik Lim
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Fix COMM and MMAP events for cpu wide counters tip-bot for Peter Zijlstra
2009-05-30 0:15 ` GeunSik Lim
2009-05-30 0:23 ` Yinghai Lu
2009-05-30 9:40 ` Ingo Molnar
2009-05-30 11:27 ` GeunSik Lim
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Clean up task_ctx vs interrupts tip-bot for Peter Zijlstra
2009-05-29 17:16 ` [tip:perfcounters/core] perf_counter: Ammend cleanup in fork() fail tip-bot for Peter Zijlstra
2009-05-30 11:45 ` [tip:perfcounters/core] perf_counter tools: Print 'CPU utilization factor' in builtin-stat tip-bot for Ingo Molnar
2009-05-30 11:51 ` [tip:perfcounters/core] perf_counter tools: Fix 'make install' tip-bot for Ingo Molnar
2009-05-30 13:00 ` [tip:perfcounters/core] perf_counter tools: Generate per command manpages (and pdf/html, etc.) tip-bot for Ingo Molnar
2009-05-30 13:46 ` Sam Ravnborg
2009-05-30 14:47 ` Ingo Molnar
2009-05-30 15:37 ` Jaswinder Singh Rajput
2009-05-30 16:38 ` Sam Ravnborg
2009-05-30 17:23 ` Ingo Molnar
2009-05-31 20:16 ` [tip:perfcounters/core] perf_counter tools: Fix unknown command help text tip-bot for Ingo Molnar
2009-06-01 8:19 ` [tip:perfcounters/core] perf_counter: Tidy up style details tip-bot for Ingo Molnar
2009-06-01 17:57 ` tip-bot for Ingo Molnar
2009-06-01 18:22 ` Frans Pop
2009-06-01 18:43 ` Ingo Molnar
2009-06-01 18:42 ` [tip:perfcounters/core] perf_counter tools: Guard against record damaging existing files tip-bot for Mike Galbraith
2009-06-02 1:45 ` [tip:perfcounters/core] perf_counter tools: Add string.[ch] tip-bot for Arnaldo Carvalho de Melo
2009-06-02 8:25 ` [tip:perfcounters/core] perf_counter tools: Make .gitignore reflect perf_counter tools files tip-bot for Mike Galbraith
2009-06-02 9:03 ` [tip:perfcounters/core] perf_counter tools: Cleanup Makefile tip-bot for Mike Galbraith
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: Use PID namespaces properly tip-bot for Peter Zijlstra
2009-06-02 15:55 ` Oleg Nesterov
2009-06-02 16:28 ` Peter Zijlstra
2009-06-02 16:30 ` Oleg Nesterov
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: tools: Expand the COMM,MMAP event synthesizer tip-bot for Peter Zijlstra
2009-06-02 14:19 ` [tip:perfcounters/core] perf_counter: tools: Better handle existing data files tip-bot for Peter Zijlstra
2009-06-02 14:42 ` [tip:perfcounters/core] perf report: Clean up the default output tip-bot for Ingo Molnar
2009-06-02 20:15 ` [tip:perfcounters/core] perf_counter tools: Remove the last nmi bits tip-bot for Peter Zijlstra
2009-06-02 20:15 ` [tip:perfcounters/core] x86: Fix atomic_long_xchg() on 64bit tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Add unique counter id tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Rename various fields tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Remove the last nmi/irq bits tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: x86: Emulate longer sample periods tip-bot for Peter Zijlstra
2009-06-02 20:16 ` [tip:perfcounters/core] perf_counter: Change data head from u32 to u64 tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter: Add ioctl for changing the sample period/frequency tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter: Rename perf_counter_hw_event => perf_counter_attr tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf_counter tools: Fix up the ABI shakeup tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf report: Separate out idle threads tip-bot for Peter Zijlstra
2009-06-02 20:17 ` [tip:perfcounters/core] perf report: Fix column width/alignment of dsos tip-bot for Ingo Molnar
2009-06-02 22:07 ` [tip:perfcounters/core] perf record: Add --append option tip-bot for Ingo Molnar
2009-06-02 22:32 ` [tip:perfcounters/core] perf record: Increase mmap buffering default tip-bot for Ingo Molnar
2009-06-02 22:32 ` [tip:perfcounters/core] perf report: Print more info instead of <unknown> entries tip-bot for Ingo Molnar
2009-06-02 22:42 ` [tip:perfcounters/core] perf_counter tools: Make source code headers more coherent tip-bot for Ingo Molnar
2009-06-02 22:49 ` [tip:perfcounters/core] perf record: Print out the number of events captured tip-bot for Ingo Molnar
2009-06-03 8:46 ` [tip:perfcounters/core] perf_counter tools: Cover PLT symbols too tip-bot for Arnaldo Carvalho de Melo
2009-06-03 8:46 ` [tip:perfcounters/core] perf report: Print -D to stdout tip-bot for Ingo Molnar
2009-06-03 9:48 ` tip-bot for Ingo Molnar
2009-06-03 9:48 ` [tip:perfcounters/core] perf report: Improve sort key recognition tip-bot for Ingo Molnar
2009-06-03 9:48 ` [tip:perfcounters/core] perf report: Handle vDSO symbols properly tip-bot for Ingo Molnar
2009-06-03 13:06 ` [tip:perfcounters/core] perf_counter: Add a comm hook for pure fork()s tip-bot for Peter Zijlstra
2009-06-03 13:06 ` [tip:perfcounters/core] perf record: Use long arg for counter period tip-bot for Peter Zijlstra
2009-06-03 13:06 ` [tip:perfcounters/core] perf report: Fix comm sorting tip-bot for Peter Zijlstra
2009-06-03 13:07 ` [tip:perfcounters/core] perf_counter: Fix race in counter initialization tip-bot for Peter Zijlstra
2009-06-03 18:24 ` [tip:perfcounters/core] perf_counter tools: Clean up old kerneltop references tip-bot for Ingo Molnar
2009-06-03 18:33 ` [tip:perfcounters/core] perf record: Refine capture printout tip-bot for Ingo Molnar
2009-06-03 18:42 ` [tip:perfcounters/core] perf report: Display 100% correctly tip-bot for Ingo Molnar
2009-06-03 18:42 ` [tip:perfcounters/core] perf stat: Print out all arguments tip-bot for Ingo Molnar
2009-06-03 19:15 ` [tip:perfcounters/core] perf report: Add front-entry cache for lookups tip-bot for Ingo Molnar
2009-06-03 19:15 ` [tip:perfcounters/core] perf help: Fix bug when there's no perf-* command around tip-bot for Ingo Molnar
2009-06-03 19:21 ` [tip:perfcounters/core] perf_counter tools: Optimize harder tip-bot for Ingo Molnar
2009-06-03 21:42 ` [tip:perfcounters/core] perf_counter: Fix throttling lock-up tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Clean up event processing tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Split out event processing helpers tip-bot for Ingo Molnar
2009-06-03 22:35 ` [tip:perfcounters/core] perf report: Handle all known event types tip-bot for Ingo Molnar
2009-06-04 7:33 ` [tip:perfcounters/core] perf report: Fix rbtree bug tip-bot for Arnaldo Carvalho de Melo
2009-06-04 8:06 ` [tip:perfcounters/core] perf top: Reduce default filter threshold tip-bot for Ingo Molnar
2009-06-04 12:48 ` [tip:perfcounters/core] perf record/report: Fix PID/COMM handling tip-bot for Ingo Molnar
2009-06-04 13:09 ` [tip:perfcounters/core] perf_counter tools: Build with native optimization tip-bot for Ingo Molnar
2009-06-05 1:03 ` Paul Mackerras
2009-06-05 18:42 ` Ingo Molnar
2009-06-04 13:09 ` [tip:perfcounters/core] perf report: Simplify symbol output tip-bot for Peter Zijlstra
2009-06-04 13:21 ` [tip:perfcounters/core] perf_counter tools: Print out symbol parsing errors only if --verbose tip-bot for Ingo Molnar
2009-06-04 13:27 ` [tip:perfcounters/core] perf report: Print out the total number of events tip-bot for Ingo Molnar
2009-06-04 13:30 ` [tip:perfcounters/core] perf report: Add consistent spacing rules tip-bot for Peter Zijlstra
2009-06-04 14:09 ` tip-bot for Peter Zijlstra
2009-06-04 14:33 ` [tip:perfcounters/core] perf_counter tools: Add color terminal output support tip-bot for Ingo Molnar
2009-06-04 14:51 ` [tip:perfcounters/core] perf_counter tools: Dont output in color on !tty tip-bot for Ingo Molnar
2009-06-04 15:30 ` [tip:perfcounters/core] perf report: Bail out if there are unrecognized options/arguments tip-bot for Ingo Molnar
2009-06-04 15:39 ` [tip:perfcounters/core] perf stat: Update help text tip-bot for Ingo Molnar
2009-06-04 16:00 ` [tip:perfcounters/core] perf_counter: Add fork event tip-bot for Peter Zijlstra
2009-06-04 16:00 ` [tip:perfcounters/core] perf_counter: Remove munmap stuff tip-bot for Peter Zijlstra
2009-06-04 16:01 ` [tip:perfcounters/core] perf_counter tools: Use fork and remove munmap events tip-bot for Peter Zijlstra
2009-06-05 12:45 ` [tip:perfcounters/core] perf record: Split out counter creation into a helper function tip-bot for Ingo Molnar
2009-06-05 12:45 ` [tip:perfcounters/core] perf record, top: Implement --freq tip-bot for Ingo Molnar
2009-06-05 13:21 ` [tip:perfcounters/core] x86: Set context.vdso before installing the mapping tip-bot for Peter Zijlstra
2009-06-05 13:21 ` [tip:perfcounters/core] perf_counter: Generate mmap events for install_special_mapping() tip-bot for Peter Zijlstra
2009-06-05 13:21 ` [tip:perfcounters/core] perf report: Deal with maps tip-bot for Peter Zijlstra
2009-06-05 13:57 ` Arnaldo Carvalho de Melo
2009-06-05 14:06 ` Peter Zijlstra
2009-06-05 15:02 ` Arnaldo Carvalho de Melo
2009-06-05 13:22 ` [tip:perfcounters/core] perf report: Display user/kernel differentiator tip-bot for Ingo Molnar
2009-06-05 13:33 ` [tip:perfcounters/core] perf record/top: Clarify events/samples naming tip-bot for Ingo Molnar
2009-06-05 13:42 ` [tip:perfcounters/core] perf_counter tools: " tip-bot for Ingo Molnar
2009-06-05 16:01 ` [tip:perfcounters/core] perf_counter tools: Remove -march=native tip-bot for Ingo Molnar
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Change PERF_SAMPLE_CONFIG into PERF_SAMPLE_ID tip-bot for Peter Zijlstra
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Add PERF_SAMPLE_PERIOD tip-bot for Peter Zijlstra
2009-06-05 16:57 ` [tip:perfcounters/core] perf_counter: Fix frequency adjustment for < HZ tip-bot for Peter Zijlstra
2009-06-05 17:12 ` [tip:perfcounters/core] perf_counter tools: Sample and display frequency adjustment changes tip-bot for Ingo Molnar
2009-06-05 18:46 ` [tip:perfcounters/core] perf record: Set frequency correctly tip-bot for Ingo Molnar
2009-06-06 9:46 ` [tip:perfcounters/core] perf_counter: Separate out attr->type from attr->config tip-bot for Ingo Molnar
2009-06-06 11:16 ` [tip:perfcounters/core] perf_counter: Implement generalized cache event types tip-bot for Ingo Molnar
2009-06-09 8:15 ` Peter Zijlstra
2009-06-09 12:15 ` Ingo Molnar
2009-06-06 13:22 ` [tip:perfcounters/core] perf_counter tools: Fix cache-event printout tip-bot for Ingo Molnar
2009-06-06 13:27 ` [tip:perfcounters/core] perf_counter tools: Add help for perf list tip-bot for Thomas Gleixner
2009-06-06 13:48 ` [tip:perfcounters/core] perf_counter tools: Uniform help printouts tip-bot for Ingo Molnar
2009-06-06 14:21 ` [tip:perfcounters/core] perf_counter tools: Tidy up manpage details tip-bot for Ingo Molnar
2009-06-06 18:03 ` [tip:perfcounters/core] perf_counter tools: Prepare for 'perf annotate' tip-bot for Ingo Molnar
2009-06-06 18:03 ` [tip:perfcounters/core] perf_counter tools: Add 'perf annotate' feature tip-bot for Ingo Molnar
2009-06-06 18:10 ` Frederic Weisbecker
2009-06-06 18:48 ` [tip:perfcounters/core] perf_counter tools: Move from Documentation/perf_counter/ to tools/perf/ tip-bot for Ingo Molnar
2009-06-06 18:48 ` [tip:perfcounters/core] perf_counter tools: Warning fixes on 32-bit tip-bot for Arjan van de Ven
2009-06-06 19:21 ` [tip:perfcounters/core] perf annotate: Automatically pick up vmlinux in the local directory tip-bot for Ingo Molnar
2009-06-06 19:24 ` [tip:perfcounters/core] perf_counter tools: Initialize a stack variable before use tip-bot for Arjan van de Ven
2009-06-06 19:27 ` [tip:perfcounters/core] perf annotate: Fix command line help text tip-bot for Ingo Molnar
2009-06-07 15:12 ` [tip:perfcounters/core] perf stat: Continue even on counter creation error tip-bot for Ingo Molnar
2009-06-07 15:36 ` [tip:perfcounters/core] perf top: Fall back to cpu-clock-tick hrtimer sampling if no cycle counter available tip-bot for Ingo Molnar
2009-06-07 15:42 ` [tip:perfcounters/core] perf record: Fall back to cpu-clock-ticks if no PMU tip-bot for Ingo Molnar
2009-06-07 15:51 ` [tip:perfcounters/core] perf_counter tools: Handle kernels with !CONFIG_PERF_COUNTER tip-bot for Ingo Molnar
2009-06-07 16:00 ` [tip:perfcounters/core] perf report: Print more expressive message in case of file open error tip-bot for Ingo Molnar
2009-06-07 17:21 ` [tip:perfcounters/core] perf stat: Print out instructins/cycle metric tip-bot for Ingo Molnar
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add Core2 support tip-bot for Thomas Gleixner
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add Atom support tip-bot for Thomas Gleixner
2009-06-08 10:31 ` [tip:perfcounters/core] perf_counter: Clean up x86 boot messages tip-bot for Ingo Molnar
2009-06-08 20:36 ` [tip:perfcounters/core] perf_counter, x86: Implement generalized cache event types, add AMD support tip-bot for Thomas Gleixner
2009-06-09 8:43 ` Peter Zijlstra
2009-06-09 12:01 ` Ingo Molnar
2009-06-08 21:33 ` tip-bot for Thomas Gleixner
2009-06-08 21:33 ` [tip:perfcounters/core] perf_counter tools: Standardize color printing tip-bot for Ingo Molnar
2009-06-10 9:51 ` [tip:core/locking] spinlock: Add missing __raw_spin_lock_flags() stub for UP tip-bot for Benjamin Herrenschmidt
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter: More aggressive frequency adjustment tip-bot for Peter Zijlstra
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter tools: Small frequency related fixes tip-bot for Peter Zijlstra
2009-06-10 15:42 ` [tip:perfcounters/core] perf_counter tools: Propagate signals properly tip-bot for Peter Zijlstra
2009-06-11 0:42 ` [tip:perfcounters/core] perf_counter: Annotate exit ctx recursion tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter tools: Normalize data using per sample period data tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter: Introduce struct for sample data tip-bot for Peter Zijlstra
2009-06-11 0:43 ` [tip:perfcounters/core] perf_counter: Accurate period data tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:perfcounters/core] perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too tip-bot for Peter Zijlstra
2009-06-12 12:42 ` [tip:perfcounters/core] perf_counter: Remove PERF_TYPE_RAW special casing tip-bot for Peter Zijlstra
2009-06-12 12:43 ` [tip:perfcounters/core] perf record: Explicity program a default counter tip-bot for Peter Zijlstra
2009-06-12 12:43 ` [tip:perfcounters/core] perf_counter: Add forward/backward attribute ABI compatibility tip-bot for Peter Zijlstra
2009-06-13 14:49 ` [tip:perfcounters/core] perf_counter: Fix stack corruption in perf_read_hw tip-bot for Marti Raudsepp
2009-06-13 14:49 ` [tip:perfcounters/core] perf stat: Reorganize output tip-bot for Ingo Molnar
2009-06-13 14:49 ` [tip:perfcounters/core] perf stat: Add feature to run and measure a command multiple times tip-bot for Ingo Molnar
2009-06-13 14:50 ` [tip:perfcounters/core] perf stat: Enable raw data to be printed tip-bot for Ingo Molnar
2009-06-13 18:36 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-14 13:54 ` [tip:perfcounters/core] perf report: Print out raw events in hexa tip-bot for Ingo Molnar
2009-06-14 14:12 ` [tip:perfcounters/core] perf record/report: Add call graph / call chain profiling tip-bot for Ingo Molnar
2009-06-14 18:36 ` tip-bot for Ingo Molnar
2009-06-15 7:14 ` Yong Wang
2009-06-16 2:57 ` Frederic Weisbecker
2009-06-16 8:09 ` Ingo Molnar
2009-06-17 7:37 ` Peter Zijlstra
2009-06-17 12:24 ` Ingo Molnar
2009-06-17 11:41 ` Frederic Weisbecker
2009-06-17 7:29 ` Peter Zijlstra
2009-06-14 20:39 ` [tip:perfcounters/core] perf_counter, x86: Fix call-chain walking tip-bot for Ingo Molnar
2009-06-15 7:24 ` [tip:perfcounters/core] perf record: Fix fast task-exit race tip-bot for Ingo Molnar
2009-06-15 8:03 ` [tip:perfcounters/core] perf_counter, x86: Fix kernel-space call-chains tip-bot for Ingo Molnar
2009-06-15 8:33 ` tip-bot for Ingo Molnar
2009-06-15 8:33 ` [tip:perfcounters/core] perf record: Fix fast task-exit race tip-bot for Ingo Molnar
2009-06-15 14:07 ` [tip:perfcounters/core] x86, mm: Add __get_user_pages_fast() tip-bot for Peter Zijlstra
2009-06-15 14:07 ` [tip:perfcounters/core] perf_counter: x86: Fix call-chain support to use NMI-safe methods tip-bot for Peter Zijlstra
2009-06-15 16:14 ` Mathieu Desnoyers
2009-06-15 17:05 ` Ingo Molnar
2009-06-15 17:42 ` Mathieu Desnoyers
2009-06-15 18:18 ` Ingo Molnar
2009-06-15 17:11 ` Linus Torvalds
2009-06-15 17:18 ` Ingo Molnar
2009-06-15 17:37 ` Linus Torvalds
2009-06-15 18:05 ` Mathieu Desnoyers
2009-06-15 18:23 ` Ingo Molnar
2009-06-15 18:28 ` Ingo Molnar
2009-06-15 18:42 ` Mathieu Desnoyers
2009-06-15 18:47 ` Ingo Molnar
2009-06-15 18:51 ` Linus Torvalds
2009-06-15 19:16 ` Mathieu Desnoyers
2009-06-15 18:38 ` Mathieu Desnoyers
2009-06-15 18:50 ` Ingo Molnar
2009-06-15 18:39 ` H. Peter Anvin
2009-06-15 18:45 ` Ingo Molnar
2009-06-15 18:55 ` H. Peter Anvin
2009-06-15 19:02 ` Avi Kivity
2009-06-16 8:36 ` Ingo Molnar
2009-06-16 8:52 ` Avi Kivity
2009-06-16 10:50 ` Ingo Molnar
2009-06-15 18:30 ` Linus Torvalds
2009-06-15 18:36 ` Ingo Molnar
2009-06-15 18:46 ` Mathieu Desnoyers
2009-06-15 19:04 ` Linus Torvalds
2009-06-15 19:39 ` Mathieu Desnoyers
2009-06-15 19:43 ` Ingo Molnar
2009-06-15 19:51 ` Mathieu Desnoyers
2009-06-15 19:55 ` Ingo Molnar
2009-06-15 20:25 ` Ingo Molnar
2009-06-15 20:04 ` Linus Torvalds
2009-06-15 20:30 ` Ingo Molnar
2009-06-15 20:06 ` Mathieu Desnoyers
2009-06-15 20:10 ` H. Peter Anvin
2009-06-15 20:47 ` Ingo Molnar
2009-06-15 21:02 ` Mathieu Desnoyers
2009-06-15 21:12 ` Ingo Molnar
2009-06-15 21:22 ` Mathieu Desnoyers
2009-06-15 23:22 ` Linus Torvalds
2009-06-19 15:20 ` Ingo Molnar
2009-06-19 15:51 ` Mathieu Desnoyers
2009-06-19 16:16 ` Ingo Molnar
2009-06-16 8:42 ` Ingo Molnar
2009-06-16 15:21 ` H. Peter Anvin
2009-06-15 20:14 ` Jeremy Fitzhardinge
2009-06-15 20:27 ` Linus Torvalds
2009-06-15 20:42 ` H. Peter Anvin
2009-06-15 20:59 ` Ingo Molnar
2009-06-15 21:04 ` H. Peter Anvin
2009-06-15 21:13 ` Ingo Molnar
2009-06-15 22:39 ` Linus Torvalds
2009-06-15 21:06 ` Jeremy Fitzhardinge
2009-06-15 18:08 ` Ingo Molnar
2009-06-15 18:38 ` H. Peter Anvin
2009-06-15 18:48 ` Mathieu Desnoyers
2009-06-15 18:51 ` Peter Zijlstra
2009-06-15 18:59 ` Mathieu Desnoyers
2009-06-15 19:02 ` Peter Zijlstra
2009-06-15 19:11 ` H. Peter Anvin
2009-06-15 19:27 ` Mathieu Desnoyers
2009-06-15 19:32 ` H. Peter Anvin
2009-06-15 21:01 ` Ingo Molnar
2009-06-15 21:12 ` Mathieu Desnoyers
2009-06-15 21:16 ` Ingo Molnar
2009-06-15 21:34 ` Mathieu Desnoyers
2009-06-15 21:38 ` H. Peter Anvin
2009-06-15 21:54 ` Mathieu Desnoyers
2009-06-15 22:21 ` H. Peter Anvin
2009-06-15 22:30 ` Mathieu Desnoyers
2009-06-15 22:36 ` H. Peter Anvin
2009-06-15 22:49 ` Mathieu Desnoyers
2009-06-16 1:28 ` H. Peter Anvin
2009-06-16 3:05 ` Mathieu Desnoyers
2009-06-16 8:33 ` Ingo Molnar
2009-06-16 14:19 ` Mathieu Desnoyers
2009-06-16 15:22 ` H. Peter Anvin
2009-06-16 19:06 ` Mathieu Desnoyers
2009-06-16 20:26 ` H. Peter Anvin
2009-06-16 21:13 ` Mathieu Desnoyers
2009-06-16 22:37 ` H. Peter Anvin
2009-06-16 8:36 ` [tip:x86/urgent] x86: mm: Read cr2 before prefetching the mmap_lock tip-bot for Ingo Molnar
2009-06-16 17:54 ` Linus Torvalds
2009-06-15 19:16 ` [tip:perfcounters/core] perf_counter: x86: Fix call-chain support to use NMI-safe methods Avi Kivity
2009-06-15 19:18 ` H. Peter Anvin
2009-06-15 19:03 ` Ingo Molnar
2009-06-15 19:07 ` Ingo Molnar
2009-06-15 19:10 ` Peter Zijlstra
2009-06-15 19:21 ` Avi Kivity
2009-06-15 20:18 ` Jeremy Fitzhardinge
2009-06-15 19:59 ` Ingo Molnar
2009-06-15 14:07 ` [tip:perfcounters/core] perf report: Add per system call overhead histogram tip-bot for Ingo Molnar
2009-06-15 14:21 ` [tip:perfcounters/core] perf report: Fix 32-bit printf format tip-bot for Ingo Molnar
2009-06-16 19:54 ` [tip:sched/urgent] sched, x86: Fix cpufreq + sched_clock() TSC scaling tip-bot for Peter Zijlstra
2009-06-17 11:51 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-17 14:06 ` [tip:sched/urgent] sched, x86: Fix cpufreq + sched_clock() TSC scaling tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf report: Add --sort <call> --call <$regex> tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf_counter: x86: Set the period in the intel overflow handler tip-bot for Peter Zijlstra
2009-06-17 17:27 ` [tip:perfcounters/core] perf_counter tools: Replace isprint() with issane() tip-bot for Peter Zijlstra
2009-06-18 6:09 ` [tip:perfcounters/core] perf report: Tidy up the --collapse call-chain feature tip-bot for Ingo Molnar
2009-06-18 6:27 ` [tip:perfcounters/core] perf report: Tidy up the "--parent <regex>" and "--sort parent" call-chain features tip-bot for Ingo Molnar
2009-06-18 7:21 ` [tip:perfcounters/core] perf report: Add validation of call-chain entries tip-bot for Ingo Molnar
2009-06-18 7:45 ` [tip:perfcounters/core] perf_counter tools: Add and use isprint() tip-bot for Peter Zijlstra
2009-06-18 7:48 ` tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] fs: Provide empty .set_page_dirty() aop for anon inodes tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] perf_counter: Add event overlow handling tip-bot for Peter Zijlstra
2009-06-18 12:50 ` [tip:perfcounters/core] perf_counter tools: Handle lost events tip-bot for Peter Zijlstra
2009-06-18 21:17 ` Corey Ashford
2009-06-18 13:39 ` [tip:perfcounters/core] perf report: Filter to parent set by default tip-bot for Ingo Molnar
2009-06-19 11:51 ` [tip:perfcounters/core] perf_counter: Make callchain samples extensible tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter: Update userspace callchain sampling uses tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter tools: Add a data file header tip-bot for Peter Zijlstra
2009-06-19 11:52 ` [tip:perfcounters/core] perf_counter: Simplify and fix task migration counting tip-bot for Peter Zijlstra
2009-06-19 11:59 ` Peter Zijlstra
2009-06-19 12:24 ` Paul Mackerras
2009-06-19 12:39 ` Peter Zijlstra
2009-06-19 12:26 ` Peter Zijlstra
2009-06-19 16:27 ` [tip:perfcounters/core] perf_counter: Close race in perf_lock_task_context() tip-bot for Peter Zijlstra
2009-06-20 11:27 ` [tip:perfcounters/core] perf_counter: Push perf_sample_data through the swcounter code tip-bot for Peter Zijlstra
2009-06-21 8:15 ` [tip:core/urgent] lockdep: Select frame pointers on x86 tip-bot for Peter Zijlstra
2009-06-21 13:09 ` [tip:perfcounters/urgent] perf_counter tools: Fix vmlinux fallback when running on a different kernel tip-bot for Ingo Molnar
2009-06-22 15:00 ` [tip:perfcounters/urgent] perf report: Output more symbol related debug data tip-bot for Peter Zijlstra
2009-06-22 15:03 ` tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter tools: Handle overlapping MMAP events tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter: Optimize perf_swcounter_event() tip-bot for Peter Zijlstra
2009-06-23 10:03 ` [tip:perfcounters/urgent] perf_counter: Push inherit into perf_counter_alloc() tip-bot for Peter Zijlstra
2009-06-23 10:04 ` [tip:perfcounters/urgent] perf_counter: Optimize perf_counter_alloc()'s inherit case tip-bot for Peter Zijlstra
2009-06-23 14:42 ` [tip:perfcounters/urgent] perf report: Fix help text typo tip-bot for Ingo Molnar
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter tools: Rework the file format tip-bot for Peter Zijlstra
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter: Split the mmap control page in two parts tip-bot for Peter Zijlstra
2009-06-25 19:42 ` [tip:perfcounters/urgent] perf_counter: Add scale information to the mmap control page tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter, x86: Add mmap counter read support tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Add PERF_EVENT_READ tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Implement more accurate per task statistics tip-bot for Peter Zijlstra
2009-06-26 11:10 ` [RFC][PATCH] perf_counter: Complete counter swap Peter Zijlstra
2009-06-26 12:44 ` Paul Mackerras
2009-06-26 15:52 ` [tip:perfcounters/urgent] " tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf_counter: Rework the sample ABI tip-bot for Peter Zijlstra
2009-06-25 19:43 ` [tip:perfcounters/urgent] perf-report: Add modes for inherited stats and no-samples tip-bot for Peter Zijlstra
2009-06-25 19:44 ` [tip:perfcounters/urgent] perf-report: Add bare minimum PERF_EVENT_READ parsing tip-bot for Peter Zijlstra
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf_counter tools: Remove dead code tip-bot for Ingo Molnar
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf stat: Add -n/--null option to run without counters tip-bot for Ingo Molnar
2009-06-27 7:56 ` Jaswinder Singh Rajput
2009-06-27 16:52 ` Ingo Molnar
2009-06-27 4:31 ` [tip:perfcounters/urgent] perf stat: Fix multi-run stats tip-bot for Ingo Molnar
2009-06-27 4:36 ` tip-bot for Ingo Molnar
2009-06-27 8:26 ` Jaswinder Singh Rajput
2009-06-27 16:45 ` Ingo Molnar
2009-06-29 19:54 ` [tip:perfcounters/urgent] perf stat: Use percentages for scaling output tip-bot for Ingo Molnar
2009-07-01 10:55 ` [tip:perfcounters/urgent] perf_counter tools: Add more warnings and fix/annotate them tip-bot for Ingo Molnar
2009-07-03 6:27 ` [tip:perfcounters/urgent] perf_counter tools: Adjust symbols in ET_EXEC files too tip-bot for Arnaldo Carvalho de Melo
2009-07-07 12:07 ` [tip:timers/core] timekeeping: Move ktime_get() functions to timekeeping.c tip-bot for Thomas Gleixner
2009-07-09 12:04 ` [tip:timers/urgent] hrtimer: migration: always subtract base->offset tip-bot for Thomas Gleixner
2009-07-09 12:04 ` [tip:timers/urgent] hrtimer: migration: do not check expiry time on current CPU tip-bot for Thomas Gleixner
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Fix up P6 PMU details tip-bot for Peter Zijlstra
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Clean up global vs counter enable tip-bot for Peter Zijlstra
2009-07-10 10:40 ` [tip:perfcounters/core] perf_counter: Stop open coding unclone_ctx tip-bot for Peter Zijlstra
2009-07-11 9:57 ` [tip:x86/cleanups] x86/cpu: Clean up various files a bit tip-bot for Alan Cox
2009-07-11 11:00 ` Jaswinder Singh Rajput
2009-07-11 11:09 ` Jaswinder Singh Rajput
2009-07-11 14:10 ` Alan Cox
2009-07-13 6:49 ` [tip:perfcounters/core] perf_counter, x86: Extend perf_counter Pentium M support tip-bot for Daniel Qarras
2009-07-18 9:49 ` [tip:sched/urgent] sched: Account for vruntime wrapping tip-bot for Fabio Checconi
2009-07-21 12:36 ` [tip:irq/urgent] genirq: Delegate irq affinity setting to the irq thread tip-bot for Thomas Gleixner
2009-07-22 15:15 ` [tip:timers/core] hrtimer: Remove cb_entry from struct hrtimer tip-bot for Peter Zijlstra
2009-07-24 6:46 ` [tip:x86/urgent] x86: geode: Mark mfgpt irq IRQF_TIMER to prevent resume failure tip-bot for Thomas Gleixner
2009-08-01 11:22 ` [tip:perfcounters/urgent] perf_counter tools: Fix link errors with older toolchains tip-bot for Ingo Molnar
2009-08-02 13:03 ` [tip:core/locking] lockdep: Fix BFS build tip-bot for Ingo Molnar
2009-08-02 13:09 ` [tip:core/debug] debug lockups: Improve lockup detection tip-bot for Ingo Molnar
2009-08-02 17:18 ` Paul E. McKenney
2009-08-02 18:45 ` Andrew Morton
2009-08-02 19:26 ` Ingo Molnar
2009-08-02 19:39 ` Andrew Morton
2009-08-02 20:41 ` Ingo Molnar
2009-08-02 21:08 ` Andrew Morton
2009-08-03 7:59 ` Ingo Molnar
2009-08-03 8:12 ` [tip:core/debug] debug lockups: Improve lockup detection, fix generic arch fallback tip-bot for Ingo Molnar
2009-08-02 20:46 ` [tip:core/debug] debug lockups: Improve lockup detection Ingo Molnar
2009-08-02 13:10 ` [tip:perfcounters/core] perf_counter: Collapse inherit on read() tip-bot for Peter Zijlstra
2009-08-02 13:13 ` [tip:sched/core] sched: Add debug check to task_of() tip-bot for Peter Zijlstra
2009-08-02 18:36 ` [tip:core/rcu] rcu: Fix RCU & CPU hotplug hang tip-bot for Paul E. McKenney
2009-08-02 19:40 ` [tip:core/rcu] rcu: Add diagnostic check for a possible CPU-hotplug race tip-bot for Paul E. McKenney
2009-08-02 20:27 ` Ingo Molnar
2009-08-02 22:13 ` Paul E. McKenney
2009-08-03 5:15 ` Paul E. McKenney
2009-08-03 7:04 ` Ingo Molnar [this message]
2009-08-03 12:56 ` Paul E. McKenney
2009-08-06 1:26 ` Paul E. McKenney
2009-08-06 2:51 ` Gautham R Shenoy
2009-08-06 12:29 ` Ingo Molnar
2009-08-06 13:59 ` Paul E. McKenney
2009-08-08 14:57 ` [tip:core/rcu] rcu: Add second " tip-bot for Paul E. McKenney
2009-08-08 15:01 ` Ingo Molnar
2009-08-08 23:21 ` Paul E. McKenney
2009-08-09 10:54 ` tip-bot for Paul E. McKenney
2009-08-09 11:00 ` Ingo Molnar
2009-08-09 11:10 ` Ingo Molnar
2009-08-09 18:30 ` Paul E. McKenney
2009-08-09 19:23 ` Paul E. McKenney
2009-08-04 8:18 ` [tip:core/rcu] rcu: Add " Gautham R Shenoy
2009-08-04 8:20 ` Ingo Molnar
2009-08-04 11:01 ` Ingo Molnar
2009-08-04 15:37 ` Paul E. McKenney
2009-08-04 5:47 ` Gautham R Shenoy
2009-08-03 13:22 ` [tip:sched/core] sched: Add wait, sleep and iowait accounting tracepoints tip-bot for Peter Zijlstra
2009-08-03 13:24 ` Ingo Molnar
2009-08-03 14:24 ` Peter Zijlstra
2009-08-04 11:37 ` [tip:perfcounters/core] perf top: Update man page tip-bot for Mike Galbraith
2009-08-04 11:37 ` [tip:perfcounters/urgent] perf_counter tools: Provide default bfd_demangle() function in case it's not around tip-bot for Ingo Molnar
2009-08-04 16:21 ` tip-bot for Ingo Molnar
2009-08-06 12:57 ` [tip:perfcounters/urgent] perf symbol: Fix symbol parsing in certain cases: use the build-id as a symlink tip-bot for Arnaldo Carvalho de Melo
2009-08-06 18:27 ` tip-bot for Arnaldo Carvalho de Melo
2009-08-11 11:33 ` [tip:perfcounters/urgent] perf_counter, x86: Fix lapic printk message tip-bot for Ingo Molnar
2009-08-11 11:34 ` [tip:perfcounters/urgent] perf_counter, x86: Fix generic cache events on P6-mobile CPUs tip-bot for Ingo Molnar
2009-08-11 11:34 ` [tip:perfcounters/urgent] perf_counter, x86: Fix/improve apic fallback tip-bot for Ingo Molnar
2009-08-11 16:23 ` Johannes Stezenbach
2009-08-11 16:52 ` Ingo Molnar
2009-08-12 12:18 ` tip-bot for Ingo Molnar
2009-08-12 15:51 ` [tip:irq/urgent] genirq: Prevent race between free_irq() and handle_IRQ_event() tip-bot for Thomas Gleixner
2009-08-13 8:39 ` [tip:perfcounters/core] perf_counter: Provide hw_perf_counter_setup_online() APIs tip-bot for Ingo Molnar
2009-08-13 22:05 ` [tip:tracing/core] tracing: Fix syscall tracing on !HAVE_FTRACE_SYSCALLS architectures tip-bot for Ingo Molnar
2009-08-16 8:57 ` [tip:perfcounters/core] perf: Enable more compiler warnings tip-bot for Ingo Molnar
2009-08-16 12:46 ` Frederic Weisbecker
2009-08-16 14:01 ` Ingo Molnar
2009-08-16 14:06 ` Frederic Weisbecker
2009-08-16 15:22 ` Ingo Molnar
2009-08-16 12:53 ` [PATCH] perf tools: Revert the -Wswitch-enum flag Frederic Weisbecker
2009-08-16 14:15 ` [tip:perfcounters/core] perf: Enable more compiler warnings Frederic Weisbecker
2009-08-16 15:18 ` Ingo Molnar
2009-08-16 15:52 ` [PATCH] perf tools: Substract -Wformat-nonliteral from Wformat=2 in extra flags Frederic Weisbecker
2009-08-16 16:00 ` [tip:perfcounters/core] " tip-bot for Frederic Weisbecker
2009-08-16 9:18 ` [tip:perfcounters/core] perf: Build with stack-protector and with -D_FORTIFY_SOURCE=2 tip-bot for Ingo Molnar
2009-08-17 8:46 ` [tip:perfcounters/urgent] perf: Rename perf-examples.txt to examples.txt tip-bot for Carlos R. Mafra
2009-08-18 9:15 ` [tip:perfcounters/core] perf tools: Remove obsolete defines tip-bot for Ingo Molnar
2009-08-18 9:39 ` [tip:perfcounters/urgent] perf_counter: Fix the PARISC build tip-bot for Ingo Molnar
2009-08-18 12:06 ` [tip:perfcounters/urgent] perf annotate: Fix segmentation fault tip-bot for Ingo Molnar
2009-08-21 11:07 ` [tip:tracing/urgent] tracing: Fix too large stack usage in do_one_initcall() tip-bot for Ingo Molnar
2009-08-21 11:14 ` Ingo Molnar
2009-08-21 11:37 ` Peter Zijlstra
2009-08-21 11:58 ` Ingo Molnar
2009-08-21 17:48 ` Andrew Morton
2009-08-21 18:13 ` Linus Torvalds
2009-08-21 18:30 ` Steven Rostedt
2009-08-21 19:02 ` Ingo Molnar
2009-08-21 19:13 ` Linus Torvalds
2009-08-21 19:19 ` Linus Torvalds
2009-08-21 19:17 ` Ingo Molnar
2009-08-21 19:37 ` Steven Rostedt
2009-08-21 16:05 ` Linus Torvalds
2009-08-21 16:22 ` Ingo Molnar
2009-08-21 18:33 ` Arjan van de Ven
2009-08-21 19:18 ` [tip:timers/core] x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown tip-bot for Thomas Gleixner
2009-08-22 10:35 ` Ingo Molnar
2009-08-22 21:14 ` Martin Schwidefsky
2009-08-27 14:43 ` [tip:sched/clock] init: Move sched_clock_init after late_time_init tip-bot for Thomas Gleixner
2009-08-28 11:51 ` [tip:perfcounters/urgent] perf_counters: Increase paranoia level tip-bot for Ingo Molnar
2009-08-28 18:34 ` [tip:timers/core] clocksource: Resolve cpu hotplug dead lock with TSC unstable tip-bot for Thomas Gleixner
2009-08-31 8:19 ` Martin Schwidefsky
2009-08-31 14:38 ` Ingo Molnar
2009-08-31 15:59 ` Thomas Gleixner
2009-09-03 18:17 ` [boot crash] " Ingo Molnar
2009-09-03 18:21 ` Ingo Molnar
2009-09-03 18:58 ` Ingo Molnar
2009-09-08 21:43 ` john stultz
2009-09-02 6:25 ` [tip:sched/core] sched: Add wait, sleep and iowait accounting tracepoints tip-bot for Peter Zijlstra
2009-09-02 7:01 ` tip-bot for Peter Zijlstra
2009-09-02 7:15 ` tip-bot for Peter Zijlstra
2009-09-02 13:00 ` [tip:perfcounters/core] perf tools: Clean up warnings list in the Makefile tip-bot for Ingo Molnar
2009-09-02 13:00 ` [tip:perfcounters/core] perf tools: Work around strict aliasing related warnings tip-bot for Ingo Molnar
2009-09-02 19:31 ` [tip:perfcounters/core] perf trace: Sample the CPU too tip-bot for Ingo Molnar
2009-09-02 21:44 ` Frederic Weisbecker
2009-09-02 21:54 ` Ingo Molnar
2009-09-03 1:52 ` Frederic Weisbecker
2009-09-02 19:51 ` [tip:perfcounters/core] perf_counter: Introduce new (non-)paranoia level to allow raw tracepoint access tip-bot for Ingo Molnar
2009-09-03 1:11 ` Li Zefan
2009-09-03 6:47 ` Ingo Molnar
2009-09-03 6:46 ` tip-bot for Ingo Molnar
2009-09-03 11:09 ` [tip:perfcounters/core] perf trace: Sample timestamps as well tip-bot for Ingo Molnar
2009-09-03 13:48 ` tip-bot for Ingo Molnar
2009-09-03 14:27 ` [tip:perfcounters/core] perf trace: Fix parsing of perf.data tip-bot for Ingo Molnar
2009-09-03 14:27 ` [tip:perfcounters/core] perf tools: Seek to the end of the header area tip-bot for Ingo Molnar
2009-09-03 14:28 ` [tip:perfcounters/core] perf trace: Print out in nanoseconds tip-bot for Ingo Molnar
2009-09-03 14:28 ` [tip:perfcounters/core] perf trace: Fix read_string() tip-bot for Ingo Molnar
2009-09-03 16:55 ` [tip:perfcounters/core] perf_counter: Fix output-sharing error path tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Clean up topology.h tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Turn on SD_BALANCE_NEWIDLE tip-bot for Ingo Molnar
2009-09-04 10:25 ` [tip:sched/balancing] sched: Turn on SD_WAKE_IDLE for 'close' domains tip-bot for Ingo Molnar
2009-09-04 15:42 ` [tip:perfcounters/core] perf stat: Change noise calculation to use stddev tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: Remove the limit on repeat tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: Use stddev_mean in stead of stddev tip-bot for Peter Zijlstra
2009-09-04 15:43 ` [tip:perfcounters/core] perf stat: More advanced variance computation tip-bot for Peter Zijlstra
2009-09-04 18:34 ` [tip:perfcounters/core] perf stat: Clean up statistics calculations a bit more tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: Remove short cut from select_task_rq_fair() tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: Deal with low-load in wake_affine() tip-bot for Peter Zijlstra
2009-09-07 20:37 ` [tip:sched/balancing] sched: enable SD_WAKE_IDLE tip-bot for Peter Zijlstra
2009-09-08 11:19 ` [tip:sched/core] sched: Ensure that a child can't gain time over it's parent after fork() tip-bot for Mike Galbraith
2009-09-08 11:49 ` Ingo Molnar
2009-09-08 11:53 ` Jens Axboe
2009-09-08 12:42 ` Mike Galbraith
2009-09-14 20:04 ` [tip:timers/core] clocksource: clocksource_select must be called with mutex locked tip-bot for Thomas Gleixner
2009-09-14 20:04 ` [tip:timers/core] clocksource: Delay clocksource down rating to late boot tip-bot for Thomas Gleixner
2009-09-15 8:22 ` [tip:timers/core] time: Prevent 32 bit overflow with set_normalized_timespec() tip-bot for Thomas Gleixner
2009-09-15 9:30 ` [tip:perfcounters/core] perf: Add 'perf sched' tool tip-bot for Ingo Molnar
2009-09-15 9:30 ` [tip:perfcounters/core] perf sched: Import schedbench.c tip-bot for Ingo Molnar
2009-09-15 9:31 ` [tip:perfcounters/core] perf sched: Implement the scheduling workload replay engine tip-bot for Ingo Molnar
2009-09-15 9:31 ` [tip:perfcounters/core] perf sched: Tighten up the code tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Clean up latency and replay sub-commands tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Display time in milliseconds, reorganize output tip-bot for Ingo Molnar
2009-09-15 9:32 ` [tip:perfcounters/core] perf sched: Add runtime stats tip-bot for Ingo Molnar
2009-09-15 9:33 ` [tip:perfcounters/core] perf sched: Output runtime and context switch totals tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Add 'perf sched latency' and 'perf sched replay' tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Finish latency => atom rename and misc cleanups tip-bot for Ingo Molnar
2009-09-15 9:34 ` [tip:perfcounters/core] perf sched: Clean up PID sorting logic tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf_counter: Allow mmap if paranoid checks are turned off tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf sched: Add 'perf sched trace', improve documentation tip-bot for Ingo Molnar
2009-09-15 9:35 ` [tip:perfcounters/core] perf_counter, sched: Add sched_stat_runtime tracepoint tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf tools: Implement counter output multiplexing tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Fix 'perf sched latency' output on 32-bit systems tip-bot for Ingo Molnar
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Print PIDs too tip-bot for mingo
2009-09-15 9:36 ` [tip:perfcounters/core] perf sched: Add support for sched:sched_stat_runtime events tip-bot for mingo
2009-09-16 10:19 ` [tip:sched/core] sched: Fix double_rq_lock() compile warning tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Split WAKEUP_OVERLAP tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Complete buddy switches tip-bot for Mike Galbraith
2009-09-16 10:19 ` [tip:sched/core] sched: Add come comments to the sched features tip-bot for Peter Zijlstra
2009-09-16 10:19 ` [tip:sched/core] sched: Move code around tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Move sched_balance_self() into sched_fair.c tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Hook sched_balance_self() into sched_class::select_task_rq() tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Add TASK_WAKING tip-bot for Peter Zijlstra
2009-09-16 10:20 ` [tip:sched/core] sched: Merge select_task_rq_fair() and sched_balance_self() tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Weaken SD_POWERSAVINGS_BALANCE tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: for_each_domain() vs RCU tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Fix task affinity for select_task_rq_fair tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Tweak wake_idx tip-bot for Peter Zijlstra
2009-09-16 10:21 ` [tip:sched/core] sched: Fix some domain tunings tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] sched: Reduce forkexec_idx tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] sched: Provide arch_scale_freq_power tip-bot for Peter Zijlstra
2009-09-16 10:22 ` [tip:sched/core] x86: Move APERF/MPERF into a X86_FEATURE tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] x86: Add generic aperf/mperf code tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] x86: sched: Provide arch implementations using aperf/mperf tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] sched: Feature to disable APERF/MPERF cpu_power tip-bot for Peter Zijlstra
2009-09-16 10:23 ` [tip:sched/core] sched: Rename select_task_rq() argument tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Rename sync arguments tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add WF_FORK tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Fix sync wakeups again tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add a few SYNC hint knobs to play with tip-bot for Peter Zijlstra
2009-09-16 10:24 ` [tip:sched/core] sched: Add SD_PREFER_LOCAL tip-bot for Peter Zijlstra
2009-09-16 10:25 ` [tip:sched/core] sched: Implement a gentler fair-sleepers feature tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:sched/core] sched: x86: Name old_perf in a unique way tip-bot for Peter Zijlstra
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Account for lost events, increase default buffering tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Sanity check context switch events tip-bot for Ingo Molnar
2009-09-16 10:25 ` [tip:perfcounters/core] perf sched: Make idle thread and comm/pid names more consistent tip-bot for Ingo Molnar
2009-09-16 12:36 ` [tip:x86/platform] x86: Move get/set_wallclock to x86_platform_ops tip-bot for Feng Tang
2009-09-16 14:45 ` [tip:perfcounters/core] perf sched: Add 'perf sched map' scheduling event map printout tip-bot for Ingo Molnar
2009-09-16 15:09 ` [tip:sched/core] sched: Optimize cgroup vs wakeup a bit tip-bot for Peter Zijlstra
2009-09-16 15:09 ` [tip:sched/core] sched: Clean up the load_idx selection in select_task_rq_fair tip-bot for Peter Zijlstra
2009-09-16 15:10 ` [tip:sched/core] sched: Rename flags to wake_flags tip-bot for Peter Zijlstra
2009-09-16 15:10 ` [tip:sched/core] sched: Disable wakeup balancing tip-bot for Peter Zijlstra
2009-09-16 18:50 ` Peter Zijlstra
2009-09-16 19:13 ` [tip:sched/core] sched: Fix TASK_WAKING & loadaverage breakage tip-bot for Ingo Molnar
2009-09-16 19:15 ` tip-bot for Ingo Molnar
2009-09-17 7:48 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING tip-bot for Peter Zijlstra
2009-09-17 7:49 ` [tip:sched/core] sched: Fix TASK_WAKING & loadaverage breakage tip-bot for Ingo Molnar
2009-09-17 7:54 ` tip-bot for Ingo Molnar
2009-09-17 7:54 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING, disable FAIR_SLEEPERS tip-bot for Peter Zijlstra
2009-09-17 8:12 ` [tip:sched/core] sched: Add new wakeup preemption mode: WAKEUP_RUNNING tip-bot for Peter Zijlstra
2009-09-17 8:18 ` tip-bot for Peter Zijlstra
2009-09-17 8:54 ` [tip:sched/core] sched: Stop buddies from hogging the system tip-bot for Peter Zijlstra
2009-09-17 8:54 ` [tip:sched/core] sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINE tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf sched: Determine the number of CPUs automatically tip-bot for Ingo Molnar
2009-09-17 19:34 ` Arjan van de Ven
2009-09-17 19:45 ` Ingo Molnar
2009-09-17 20:09 ` Ingo Molnar
2009-09-17 18:07 ` [tip:perfcounters/core] perf_counter: Do not throttle single swcounter events tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf_counter: Allow for a wakeup watermark tip-bot for Peter Zijlstra
2009-09-17 18:07 ` [tip:perfcounters/core] perf record: Disable profiling before draining the buffer tip-bot for Peter Zijlstra
2009-09-17 20:12 ` [tip:perfcounters/core] perf_counter: Do not throttle single swcounter events tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf_counter: Allow for a wakeup watermark tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf record: Disable profiling before draining the buffer tip-bot for Peter Zijlstra
2009-09-17 20:13 ` [tip:perfcounters/core] perf sched: Determine the number of CPUs automatically tip-bot for Ingo Molnar
2009-09-18 19:18 ` [tip:perfcounters/core] perf_counter: Fix up swcounter throttling tip-bot for Peter Zijlstra
2009-09-18 19:19 ` [tip:perfcounters/core] sched_clock: Make it NMI safe tip-bot for Peter Zijlstra
2009-09-19 15:16 ` [tip:sched/urgent] sched: Re-add lost cpu_allowed check to sched_fair.c::select_task_rq_fair() tip-bot for Mike Galbraith
2009-09-21 12:52 ` [tip:perfcounters/rename] perf_counter: Rename list_entry -> group_entry, counter_list -> group_list tip-bot for Ingo Molnar
2009-09-21 12:52 ` [tip:perfcounters/rename] perf_counter: Rename 'event' to event_id/hw_event tip-bot for Ingo Molnar
2009-09-21 12:53 ` [tip:perfcounters/rename] perf: Tidy up after the big rename tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:core/printk] ratelimit: Use per ratelimit context locking tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:core/printk] ratelimit: Fix/allow use in atomic contexts tip-bot for Ingo Molnar
2009-09-22 14:46 ` Linus Torvalds
2009-09-22 13:34 ` [tip:perf/urgent] perf stat: Fix zero total printouts tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:x86/urgent] x86: mce: Clean up thermal throttling state tracking code tip-bot for Ingo Molnar
2009-09-22 13:34 ` [tip:x86/urgent] x86: mce: Fix thermal throttling message storm tip-bot for Ingo Molnar
2009-09-22 14:26 ` [tip:core/printk] printk: Remove ratelimit.h from kernel.h tip-bot for Ingo Molnar
2009-09-25 8:49 ` [tip:perf/urgent] perf_event: Provide vmalloc() based mmap() backing tip-bot for Peter Zijlstra
2009-10-04 7:54 ` [tip:core/futexes] futex: Fix locking imbalance tip-bot for Thomas Gleixner
2009-10-04 15:48 ` [tip:core/urgent] " tip-bot for Thomas Gleixner
2009-10-05 19:11 ` tip-bot for Thomas Gleixner
2009-10-06 13:18 ` [tip:perf/core] perf tools: Default to 1 KHz auto-sampling freq events tip-bot for Ingo Molnar
2009-10-06 13:42 ` tip-bot for Ingo Molnar
2009-10-06 15:03 ` [tip:core/urgent] futex: Nullify robust lists after cleanup tip-bot for Peter Zijlstra
2009-10-06 15:54 ` Anirban Sinha
2009-10-06 15:03 ` [tip:core/urgent] futex: Move exit_pi_state() call to release_mm() tip-bot for Thomas Gleixner
2009-10-12 7:13 ` [tip:perf/core] perf sched: Add -C option to measure on a specific CPU tip-bot for Mike Galbraith
2009-10-13 19:04 ` [tip:core/urgent] futex: Handle spurious wake up tip-bot for Thomas Gleixner
2009-10-15 10:46 ` [tip:perf/core] events: Harmonize event field names and print output names tip-bot for Ingo Molnar
2009-10-16 8:40 ` [tip:perf/urgent] perf tools: Bump version to 0.0.2 tip-bot for Ingo Molnar
2009-10-24 1:04 ` [tip:branch?] sched: Strengthen buddies and mitigate buddy induced latencies tip-bot for Mike Galbraith
2009-11-02 9:30 ` [tip:x86/urgent] x86: Fix printk message typo in mtrr cleanup code tip-bot for Dave Jones
2009-11-02 19:45 ` [tip:sched/urgent] sched: Disable SD_PREFER_LOCAL at node level tip-bot for Mike Galbraith
2009-11-03 7:03 ` tip-bot for Mike Galbraith
2009-11-04 19:33 ` [tip:sched/core] sched: Rate-limit newidle tip-bot for Mike Galbraith
2009-11-12 11:33 ` [tip:sched/urgent] sched: Fix/add missing update_rq_clock() calls tip-bot for Mike Galbraith
2009-11-13 19:49 ` [tip:timers/core] nohz: Type cast printk argument tip-bot for Thomas Gleixner
2009-11-13 19:50 ` [tip:timers/core] nohz: Track last do_timer() cpu tip-bot for Thomas Gleixner
2009-11-17 17:18 ` [tip:perf/urgent] perf annotate: Allocate history size correctly tip-bot for Nick Piggin
2009-11-23 7:15 ` [tip:tracing/core] ring-buffer benchmark: Run producer/consumer threads at nice +19 tip-bot for Ingo Molnar
2009-11-24 14:16 ` Steven Rostedt
2009-11-24 14:20 ` Steven Rostedt
2009-11-24 14:39 ` Ingo Molnar
2009-11-24 15:01 ` Steven Rostedt
2009-11-24 15:22 ` Ingo Molnar
2009-11-24 15:40 ` Steven Rostedt
2009-11-23 11:52 ` [tip:perf/core] perf events: Do not generate function trace entries in perf code tip-bot for Ingo Molnar
2009-11-23 11:53 ` [tip:tracing/core] tracing, function tracer: Clean up strstrip() usage tip-bot for Ingo Molnar
2009-11-24 14:15 ` Steven Rostedt
2009-11-23 11:53 ` [tip:perf/core] perf_events: Optimize the swcounter hotpath tip-bot for Ingo Molnar
2009-11-26 8:15 ` [tip:x86/debug] x86: dumpstack: Clean up the x86_stack_ids[][] initalization and other details tip-bot for Ingo Molnar
2009-11-30 8:23 ` [tip:perf/scripting] perf scripting: Fix build tip-bot for Ingo Molnar
2009-12-06 20:27 ` [tip:sched/urgent] sched: Fix balance vs hotplug race tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Remove sysctl.sched_features tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Consolidate select_task_rq() callers tip-bot for Peter Zijlstra
2009-12-09 9:53 ` [tip:sched/urgent] sched: Remove rq->clock coupling from set_task_cpu() tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Clean up ttwu() rq locking tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Sanitize fork() handling tip-bot for Peter Zijlstra
2009-12-09 9:54 ` [tip:sched/urgent] sched: Clean up check_preempt_wakeup() tip-bot for Peter Zijlstra
2009-12-09 9:55 ` [tip:sched/urgent] sched: Discard some old bits tip-bot for Peter Zijlstra
2009-12-09 9:55 ` [tip:sched/urgent] sched: Remove unnecessary RCU exclusion tip-bot for Peter Zijlstra
2009-12-10 8:43 ` [tip:sched/urgent] sched: Fix build warning in get_update_sysctl_factor() tip-bot for Mike Galbraith
2009-12-10 19:36 ` [tip:sched/urgent] sched: Remove forced2_migrations stats tip-bot for Ingo Molnar
2009-12-15 9:27 ` [tip:perf/diff] perf diff: Improve the help text tip-bot for Ingo Molnar
2009-12-15 14:30 ` tip-bot for Ingo Molnar
2009-12-28 10:07 ` [tip:perf/core] perf events: Remove arg from perf sched hooks tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Move load balance code into sched_fair.c tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Remove the sched_class load_balance methods tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Remove rq_iterator usage from load_balance_fair tip-bot for Peter Zijlstra
2010-01-21 13:52 ` [tip:sched/core] sched: Remove rq_iterator from move_one_task tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Remove from fwd decls tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Add a lock break for PREEMPT=y tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Unify load_balance{,_newidle}() tip-bot for Peter Zijlstra
2010-01-21 13:53 ` [tip:sched/core] sched: Remove load_balance_newidle() tip-bot for Peter Zijlstra
2010-01-21 13:54 ` [tip:sched/core] sched: Assume *balance is valid tip-bot for Peter Zijlstra
2010-01-21 13:55 ` [tip:perf/urgent] perf: Change the is_software_event() definition tip-bot for Peter Zijlstra
2010-01-27 13:16 ` [tip:perf/core] perf: Reimplement frequency driven sampling tip-bot for Peter Zijlstra
2010-01-29 9:29 ` [tip:perf/core] perf_event: x86: Optimize x86_pmu_disable() tip-bot for Peter Zijlstra
2010-01-29 9:29 ` [tip:perf/core] perf, x86: Clean up event constraints code a bit tip-bot for Ingo Molnar
2010-01-29 9:29 ` [tip:perf/core] perf_event: x86: Deduplicate the disable code tip-bot for Peter Zijlstra
2010-01-31 8:30 ` [tip:perf/core] Revert "perf record: Intercept all events" tip-bot for Hitoshi Mitake
2010-02-04 9:52 ` [tip:x86/debug] x86_64: Print modules like i386 does tip-bot for Alexey Dobriyan
2010-02-04 9:56 ` [tip:perf/core] perf_events: Optimize perf_event_task_tick() tip-bot for Peter Zijlstra
2010-02-04 9:56 ` [tip:perf/core] perf_events, x86: Implement intel core solo/duo support tip-bot for Peter Zijlstra
2010-02-04 9:57 ` [tip:perf/core] bitops: Ensure the compile time HWEIGHT is only used for such tip-bot for Peter Zijlstra
2010-02-04 10:27 ` [PATCH] bitops: Optimize hweight() by making use of compile-time evaluation Peter Zijlstra
2010-02-26 10:24 ` [tip:perf/core] perf_events: Report the MMAP pgoff value in bytes tip-bot for Peter Zijlstra
2010-02-26 10:25 ` [tip:perf/core] perf_events, x86: Remove superflous MSR writes tip-bot for Peter Zijlstra
2010-02-26 14:54 ` [tip:perf/core] perf_events, x86: Split PMU definitions into separate files tip-bot for Peter Zijlstra
2010-03-02 14:30 ` [tip:perf/nmi] nmi_watchdog: Tell the world we're active tip-bot for Peter Zijlstra
2010-03-02 14:30 ` [tip:perf/core] perf, x86: Restrict the ANY flag tip-bot for Peter Zijlstra
2010-03-02 14:31 ` [tip:perf/core] perf_events, x86: Fixup fixed counter constraints tip-bot for Peter Zijlstra
2010-03-02 16:26 ` Stephane Eranian
2010-03-02 17:54 ` Peter Zijlstra
2010-03-03 6:16 ` Stephane Eranian
2010-03-09 8:21 ` [tip:perf/urgent] MAINTAINERS: Add Arnaldo as tools/perf/ co-maintainer tip-bot for Ingo Molnar
2010-03-10 13:10 ` [tip:perf/urgent] perf: Optimize perf_disable tip-bot for Peter Zijlstra
2010-03-10 13:10 ` [tip:perf/urgent] perf, x86, Do not user perf_disable from NMI context tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Fix x86_pmu_start tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE) tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Properly account n_added tip-bot for Peter Zijlstra
2010-03-10 13:12 ` [tip:perf/urgent] perf, x86: Fix double disable calls tip-bot for Peter Zijlstra
2010-03-10 13:13 ` [tip:perf/urgent] perf, x86: Fix double enable calls tip-bot for Peter Zijlstra
2010-03-10 13:13 ` [tip:perf/urgent] perf: Provide better condition for event rotation tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE) tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix pebs drains tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix PEBS enable/disable vs cpuc->enabled tip-bot for Peter Zijlstra
2010-03-10 13:22 ` [tip:perf/pebs] perf, x86: Fix LBR " tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Reorder intel_pmu_enable_all() tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Deal with multiple state bits for pebs-fmt1 tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Fix silly bug in intel_pmu_pebs_{enable,disable} tip-bot for Peter Zijlstra
2010-03-10 13:23 ` [tip:perf/pebs] perf, x86: Don't reset the LBR as frequently tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Remove checking_{wr,rd}msr() usage tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Fixup the PEBS handler for Core2 cpus tip-bot for Peter Zijlstra
2010-03-10 13:24 ` [tip:perf/pebs] perf, x86: Fix LBR read-out tip-bot for Peter Zijlstra
2010-03-10 13:25 ` [tip:perf/pebs] perf, x86: Add INSTRUCTION_DECODER config flag tip-bot for Ingo Molnar
2010-03-10 13:25 ` [tip:perf/pebs] perf, x86: Fix the !CONFIG_CPU_SUP_INTEL build tip-bot for Ingo Molnar
2010-03-11 14:41 ` [tip:perf/urgent] perf, ppc: Fix compile error due to new cpu notifiers tip-bot for Peter Zijlstra
2010-03-11 14:41 ` [tip:sched/core] sched: Fix pick_next_highest_task_rt() for cgroups tip-bot for Peter Zijlstra
2010-04-02 19:10 ` [tip:perf/core] perf, x86: Fix __initconst vs const tip-bot for Peter Zijlstra
2010-04-02 19:10 ` [tip:perf/core] perf, x86: Add Nehalem programming quirk to Westmere tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Fix TASK_WAKING vs fork deadlock tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Optimize task_rq_lock() tip-bot for Peter Zijlstra
2010-04-02 19:13 ` [tip:sched/core] sched: Fix nr_uninterruptible count tip-bot for Peter Zijlstra
2010-04-02 19:14 ` [tip:sched/core] sched: Add enqueue/dequeue flags tip-bot for Peter Zijlstra
2010-04-23 10:50 ` [tip:sched/core] sched: Pre-compute cpumask_weight(sched_domain_span(sd)) tip-bot for Peter Zijlstra
2010-05-07 18:41 ` [tip:perf/core] perf: Annotate perf_event_read_group() vs perf_event_release_kernel() tip-bot for Peter Zijlstra
2010-05-07 18:43 ` [tip:perf/core] perf, x86: Remove PEBS SAMPLE_RAW support tip-bot for Peter Zijlstra
2010-05-07 18:43 ` [tip:perf/core] perf, x86: Consolidate some code repetition tip-bot for Peter Zijlstra
2010-05-07 18:44 ` [tip:perf/core] perf, x86: Improve the PEBS ABI tip-bot for Peter Zijlstra
2010-05-11 7:24 ` [tip:perf/core] Revert "perf: Fix exit() vs PERF_FORMAT_GROUP" tip-bot for Ingo Molnar
2010-05-17 21:09 ` [tip:perf/core] perf symbols: symbol inconsistency message should be done only at verbose=1 tip-bot for Arnaldo Carvalho de Melo
2010-05-17 22:33 ` [tip:perf/core] perf tools: Add mode to build without newt support tip-bot for Arnaldo Carvalho de Melo
2010-05-18 17:15 ` [tip:perf/core] perf/ftrace: Optimize perf/tracepoint interaction for single events tip-bot for Peter Zijlstra
2010-05-19 7:58 ` Frederic Weisbecker
2010-05-19 8:18 ` Peter Zijlstra
2010-05-19 8:23 ` Frederic Weisbecker
2010-05-19 8:31 ` Peter Zijlstra
2010-05-19 8:58 ` Peter Zijlstra
2010-05-19 9:06 ` Frederic Weisbecker
2010-05-19 9:12 ` Peter Zijlstra
2010-05-19 9:13 ` Frederic Weisbecker
2010-05-21 11:27 ` [tip:perf/core] perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction tip-bot for Peter Zijlstra
2010-05-18 17:16 ` [tip:perf/core] perf: Disallow mmap() on per-task inherited events tip-bot for Peter Zijlstra
2010-05-18 17:16 ` [tip:perf/core] perf: Optimize the perf_output() path by removing IRQ-disables tip-bot for Peter Zijlstra
2010-05-18 17:17 ` [tip:perf/core] perf: Optimize the hotpath by converting the perf output buffer to local_t tip-bot for Peter Zijlstra
2010-05-18 17:17 ` [tip:perf/core] perf: Optimize perf_output_*() by avoiding local_xchg() tip-bot for Peter Zijlstra
2010-05-31 7:19 ` [tip:perf/urgent] perf_events: Fix races and clean up perf_event and perf_mmap_data interaction tip-bot for Peter Zijlstra
2010-05-31 7:19 ` [tip:perf/urgent] perf_events: Fix races in group composition tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:perf/core] perf: Fix signed comparison in perf_adjust_period() tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:sched/core] sched: Fix PROVE_RCU vs cpu_cgroup tip-bot for Peter Zijlstra
2010-06-08 20:55 ` [tip:perf/core] perf, x86: Small fix to cpuid10_edx tip-bot for Livio Soares
2010-06-09 10:14 ` [tip:perf/core] perf, trace: Inline perf_swevent_put_recursion_context() tip-bot for Peter Zijlstra
2010-06-09 10:15 ` [tip:perf/core] perf, trace: Remove superfluous rcu_read_lock() tip-bot for Peter Zijlstra
2010-06-09 10:16 ` [tip:perf/core] perf: Rename perf_mmap_data to perf_buffer tip-bot for Peter Zijlstra
2010-06-09 10:16 ` [tip:perf/core] perf: Simplify the ring-buffer logic: make perf_buffer_alloc() do everything needed tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] arch: Implement local64_t tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] perf: Add perf_event_count() tip-bot for Peter Zijlstra
2010-06-09 10:17 ` [tip:perf/core] perf: Add perf_event::child_count tip-bot for Peter Zijlstra
2010-06-09 10:18 ` [tip:perf/core] perf: Convert perf_event to local_t tip-bot for Peter Zijlstra
2010-06-09 10:18 ` [tip:perf/core] perf: Fix build breakage for architecutes without atomic64_t tip-bot for Peter Zijlstra
2010-07-17 11:12 ` [tip:sched/urgent] sched: Revert nohz_ratelimit() for now tip-bot for Peter Zijlstra
2010-07-18 10:33 ` [tip:perf/core] perf ui: Make END go to the last entry, not the top of the last page tip-bot for Arnaldo Carvalho de Melo
2010-07-18 10:34 ` [tip:perf/core] perf hists: Factor out duplicated code tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf sort: Make column width code per hists instance tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf ui: Restore SPACE as an alias to PGDN in annotate tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:49 ` [tip:perf/core] perf hist: Introduce routine to measure lenght of formatted entry tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: Consider the refreshed dimensions in ui_browser__show tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: Show the scroll bar over the left window frame tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:50 ` [tip:perf/core] perf ui: New hists tree widget tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:51 ` [tip:perf/core] perf report: Don't abbreviate file paths relative to the cwd tip-bot for Dave Martin
2010-08-02 7:51 ` [tip:perf/core] perf tools: Remove unneeded code for tracking the cwd in perf sessions tip-bot for Dave Martin
2010-08-02 7:51 ` [tip:perf/core] perf man pages: Fix cut'n'paste error tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf record: Release resources at exit tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf symbols: Precisely specify if dso->{long,short}_name should be freed tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:52 ` [tip:perf/core] perf tools: Factor out buildid reading and make it implicit in dso__load tip-bot for Dave Martin
2010-08-02 7:52 ` [tip:perf/core] perf tools: remove extra build-id check factored into dso__load tip-bot for Dave Martin
2010-08-02 7:53 ` [tip:perf/core] perf symbols: Improve debug image search when loading symbols tip-bot for Dave Martin
2010-08-02 7:53 ` [tip:perf/core] perf tui: Make CTRL+Z suspend perf tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:54 ` [tip:perf/core] perf tools: Release thread resources on PERF_RECORD_EXIT tip-bot for Arnaldo Carvalho de Melo
2010-08-02 7:54 ` [tip:perf/core] perf tools: Release session and symbol resources on exit tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:54 ` [tip:perf/core] perf session: Free the ref_reloc_sym memory at the right place tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:54 ` [tip:perf/core] perf session: Invalidate last_match when removing threads from rb_tree tip-bot for Arnaldo Carvalho de Melo
2010-08-03 5:55 ` [tip:perf/core] perf tools: Don't keep unreferenced maps when unmaps are detected tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf symbols: Store the symbol binding tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf ui: Add a map browser tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:04 ` [tip:perf/core] perf ui: Shorten ui_browser->refresh_entries to refresh tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf hists: Handle verbose in hists__sort_list_width tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf hists: Fixup addr snprintf width on 32 bit arches tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:05 ` [tip:perf/core] perf ui: Add search by name/addr to the map__browser tip-bot for Arnaldo Carvalho de Melo
2010-08-06 17:06 ` [tip:perf/core] perf report: Speed up exit path tip-bot for Arnaldo Carvalho de Melo
2010-08-07 7:01 ` [tip:perf/core] perf tui: Introduce list_head based generic ui_browser refresh routine tip-bot for Arnaldo Carvalho de Melo
2010-08-07 7:01 ` [tip:perf/core] perf ui: Start breaking down newt.c into multiple files tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:39 ` [tip:perf/core] perf ui: Shorten ui_browser member names tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move ui_helpline routines to separate file in util/ui/ tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move ui_progress " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:40 ` [tip:perf/core] perf ui: Move annotate browser to util/ui/browsers/ tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:41 ` [tip:perf/core] perf ui: Move map " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:41 ` [tip:perf/core] perf ui: Move hists " tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf ui: Complete the breakdown of util/newt.c tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf annotate: Sort by hottest lines in the TUI tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:42 ` [tip:perf/core] perf ui: Make SPACE work as PGDN in all browsers tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf annotate: Cycle thru sorted lines with samples tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf ui browser: Add ui_browser__show counterpart: __hide tip-bot for Arnaldo Carvalho de Melo
2010-08-11 7:43 ` [tip:perf/core] perf ui hist browser: Fixup key bindings tip-bot for Arnaldo Carvalho de Melo
2010-08-12 20:03 ` [tip:perf/urgent] perf: Add back list_head data types tip-bot for Ingo Molnar
2010-08-16 17:32 ` [tip:perf/urgent] perf annotate tui: Fix exit and RIGHT keys handling tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:39 ` [tip:perf/core] perf ui browser: Abstract some more slang operations tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:40 ` [tip:perf/core] perf ui browser: Return the exit key in all browsers tip-bot for Arnaldo Carvalho de Melo
2010-08-20 12:40 ` [tip:perf/core] perf ui browser: Add routines to compactly specify exit keys tip-bot for Arnaldo Carvalho de Melo
2010-08-21 20:18 ` [tip:perf/core] perf tools: Add --tui and --stdio to choose the UI tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:33 ` [tip:perf/core] perf hists: Fix hist_entry__init_have_children tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: replace rb_first() != NULL by !RB_EMPTY_ROOT() tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: Init the has_children fields just once tip-bot for Arnaldo Carvalho de Melo
2010-08-30 8:34 ` [tip:perf/core] perf hists browser: Introduce "expand/collapse all callchains" action tip-bot for Arnaldo Carvalho de Melo
2010-09-09 19:45 ` [tip:perf/core] perf: Fix CPU hotplug tip-bot for Peter Zijlstra
2010-09-09 19:47 ` [tip:perf/core] perf: Deconstify struct pmu tip-bot for Peter Zijlstra
2010-09-09 19:47 ` [tip:perf/core] perf: Register PMU implementations tip-bot for Peter Zijlstra
2010-09-09 19:48 ` [tip:perf/core] perf: Unindent labels tip-bot for Peter Zijlstra
2010-09-09 19:48 ` [tip:perf/core] perf: Reduce perf_disable() usage tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Per PMU disable tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Default PMU ops tip-bot for Peter Zijlstra
2010-09-09 19:49 ` [tip:perf/core] perf: Shrink hw_perf_event tip-bot for Peter Zijlstra
2010-09-09 19:50 ` [tip:perf/core] perf: Rework the PMU methods tip-bot for Peter Zijlstra
2010-09-11 8:16 ` Michael Cree
2010-09-11 8:16 ` Michael Cree
2010-09-11 9:40 ` Peter Zijlstra
2010-09-12 5:33 ` Michael Cree
2010-09-12 5:37 ` [PATCH] alpha: Fix HW performance counters to be stopped properly Michael Cree
2010-09-15 10:02 ` [tip:perf/core] " tip-bot for Michael Cree
2010-09-13 12:15 ` [tip:perf/core] perf: Rework the PMU methods Peter Zijlstra
2010-09-13 13:18 ` Peter Zijlstra
2010-09-14 10:11 ` Michael Cree
2010-09-14 14:07 ` Peter Zijlstra
2010-09-15 20:25 ` Michael Cree
2010-09-09 19:50 ` [tip:perf/core] perf: Remove the sysfs bits tip-bot for Peter Zijlstra
2010-09-09 19:50 ` [tip:perf/core] perf: Separate find_get_context() from event initialization tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Remove the swevent hash-table from the cpu context tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Per cpu-context rotation timer tip-bot for Peter Zijlstra
2010-09-09 19:51 ` [tip:perf/core] perf: Per-pmu-per-cpu contexts tip-bot for Peter Zijlstra
2010-09-10 14:54 ` Frederic Weisbecker
2010-09-10 15:37 ` Paul E. McKenney
2010-09-10 15:46 ` Peter Zijlstra
2010-09-10 16:05 ` Paul E. McKenney
2010-09-10 15:56 ` Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Move some code around tip-bot for Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Clean up perf_event_context allocation tip-bot for Peter Zijlstra
2010-09-09 19:52 ` [tip:perf/core] perf: Multiple task contexts tip-bot for Peter Zijlstra
2010-09-09 19:53 ` [tip:perf/core] perf: Provide a separate task context for swevents tip-bot for Peter Zijlstra
2010-09-09 19:53 ` [tip:perf/core] perf: Optimize context ops tip-bot for Peter Zijlstra
2010-09-09 19:54 ` [tip:perf/core] perf: Fix up delayed_put_task_struct() tip-bot for Peter Zijlstra
2010-09-10 14:32 ` [tip:perf/core] perf: Ensure we call add_event_to_ctx() with the right locks held tip-bot for Peter Zijlstra
2010-09-10 15:48 ` [tip:perf/core] perf: Fix perf_init_event() tip-bot for Peter Zijlstra
2010-09-13 15:18 ` [tip:perf/core] perf: Sanitize the RCU logic tip-bot for Peter Zijlstra
2010-09-13 15:19 ` [tip:perf/core] perf: Fix free_event() tip-bot for Peter Zijlstra
2010-10-18 19:15 ` [tip:sched/core] sched: Unindent labels tip-bot for Peter Zijlstra
2010-10-18 19:22 ` [tip:perf/core] perf: Optimize sw events tip-bot for Peter Zijlstra
2010-10-18 19:22 ` [tip:perf/core] jump_label: Add COND_STMT(), reducer wrappery tip-bot for Peter Zijlstra
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: Improve the failed-syscalls-by-pid script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: Improve the syscalls-counts script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:22 ` [tip:perf/urgent] perf python scripting: print the syscall name on sctop tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:23 ` [tip:perf/urgent] perf python scripting: Improve the syscalls-by-pid script tip-bot for Arnaldo Carvalho de Melo
2010-10-26 10:23 ` [tip:perf/urgent] perf python scripting: Support fedora 11 (audit 1.7.17) tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:01 ` [tip:perf/urgent] perf scripting: Shut up 'perf record' final status tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:01 ` [tip:perf/urgent] perf python scripting: Fixup cut'n'paste error in sctop script tip-bot for Arnaldo Carvalho de Melo
2010-10-27 11:02 ` [tip:perf/urgent] perf python scripting: Add futex-contention script tip-bot for Arnaldo Carvalho de Melo
2010-11-21 13:43 ` [tip:perf/core] perf tools: Change my maintainer address tip-bot for Arnaldo Carvalho de Melo
2010-11-23 10:22 ` [tip:sched/core] sched: Fix UP build breakage tip-bot for Peter Zijlstra
2010-11-23 10:22 ` [tip:sched/core] cpu: Remove incorrect BUG_ON tip-bot for Peter Zijlstra
2010-11-23 14:39 ` Oleg Nesterov
2010-11-23 15:05 ` Peter Zijlstra
2010-11-23 15:08 ` Oleg Nesterov
2010-11-23 17:16 ` Peter Zijlstra
2010-11-23 17:31 ` Oleg Nesterov
2010-11-23 10:23 ` [tip:sched/core] sched: Add some clock info to sched_debug tip-bot for Peter Zijlstra
2010-11-23 19:51 ` [tip:perf/urgent] perf record: Handle restrictive permissions in /proc/{kallsyms,modules} tip-bot for Arnaldo Carvalho de Melo
2010-11-26 15:00 ` [tip:perf/core] perf: Fix inherit vs. context rotation bug tip-bot for Thomas Gleixner
2010-11-28 4:36 ` Rakib Mullick
2010-11-26 15:01 ` [tip:perf/core] perf: Fix the software context switch counter tip-bot for Peter Zijlstra
2010-11-26 15:04 ` [tip:perf/core] perf: Ignore non-sampling overflows tip-bot for Peter Zijlstra
2010-11-26 19:20 ` Francis Moreau
2010-11-28 8:33 ` [tip:perf/core] perf record: Add option to disable collecting build-ids tip-bot for Arnaldo Carvalho de Melo
2010-11-29 10:22 ` Stephane Eranian
2010-11-29 15:14 ` Arnaldo Carvalho de Melo
2010-11-28 8:34 ` [tip:perf/core] perf events: Default to using event__process_lost tip-bot for Arnaldo Carvalho de Melo
2010-12-07 7:06 ` [tip:perf/urgent] perf record: Fix eternal wait for stillborn child tip-bot for Arnaldo Carvalho de Melo
2010-12-08 20:39 ` [tip:perf/urgent] perf: Fix duplicate events with multiple-pmu vs software events tip-bot for Peter Zijlstra
2010-12-08 20:42 ` [tip:perf/core] perf, amd: Remove the nb lock tip-bot for Peter Zijlstra
2010-12-08 20:42 ` [tip:perf/core] perf: Stop all counters on reboot tip-bot for Peter Zijlstra
2010-12-09 23:39 ` [tip:perf/core] perf session: Remove unneeded dump_printf calls tip-bot for Arnaldo Carvalho de Melo
2010-12-16 12:31 ` [tip:perf/core] perf, x86: Detect broken BIOSes that corrupt the PMU tip-bot for Peter Zijlstra
2010-12-16 12:33 ` [tip:perf/core] perf, x86: Provide a PEBS capable cycle event tip-bot for Peter Zijlstra
2010-12-22 11:28 ` [tip:perf/urgent] perf buildid-list: Fix error return for success tip-bot for Arnaldo Carvalho de Melo
2010-12-25 8:57 ` [tip:perf/core] perf symbols: Improve kallsyms symbol end addr calculation tip-bot for Arnaldo Carvalho de Melo
2010-12-25 8:58 ` [tip:perf/core] perf test: Look forward for symbol aliases tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf script: Finish the rename from trace to script tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf record: Fix use of sample_id_all userspace with !sample_id_all kernels tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:19 ` [tip:perf/core] perf script: Fix event ordering settings to work with older kernels tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:21 ` [tip:perf/core] perf tools: Introduce event selectors tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:21 ` [tip:perf/core] perf evsel: Adopt MATCH_EVENT macro from 'stat' tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:22 ` [tip:perf/core] perf util: Move do_read from session to util tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:22 ` [tip:perf/core] perf evsel: Delete the event selectors at exit tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:23 ` [tip:perf/core] perf evsel: Steal the counter reading routines from stat tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:23 ` [tip:perf/core] perf evsel: Introduce per cpu and per thread open helpers tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:24 ` [tip:perf/core] perf tools: Refactor cpumap to hold nr and the map tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:24 ` [tip:perf/core] perf tools: Refactor all_tids " tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:25 ` [tip:perf/core] perf evsel: Use {cpu,thread}_map to shorten list of parameters tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:25 ` [tip:perf/core] perf evsel: Auto allocate resources needed for some methods tip-bot for Arnaldo Carvalho de Melo
2011-01-04 8:26 ` [tip:perf/core] perf test: Add test for counting open syscalls tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:36 ` [tip:perf/core] perf test: Clarify some error reports in the open syscall test tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:37 ` [tip:perf/core] perf session: Warn about errors when processing pipe events too tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:37 ` [tip:perf/core] perf script: Use the default lost event handler tip-bot for Arnaldo Carvalho de Melo
2011-01-05 17:38 ` [tip:perf/core] perf script: Make some lists static tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:09 ` [tip:perf/urgent] perf sched: Fix allocation result check tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:10 ` [tip:perf/urgent] perf tools: Emit clearer message for sys_perf_event_open ENOENT return tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:11 ` [tip:perf/urgent] perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) tip-bot for Arnaldo Carvalho de Melo
2011-01-11 11:11 ` [tip:perf/urgent] perf session: Fix infinite loop in __perf_session__process_events tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:51 ` [tip:perf/urgent] perf evsel: Fix order of event list deletion tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:52 ` [tip:perf/urgent] perf top: Fix annotate segv tip-bot for Arnaldo Carvalho de Melo
2011-01-12 10:52 ` [tip:perf/urgent] Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return" tip-bot for Arnaldo Carvalho de Melo
2011-01-18 8:48 ` [tip:perf/urgent] perf tools: Fix handling of wildcards in tracepoint event selectors tip-bot for Arnaldo Carvalho de Melo
2011-01-18 19:06 ` [tip:perf/urgent] perf: Fix contexted inheritance tip-bot for Peter Zijlstra
2011-01-21 15:37 ` [tip:perf/urgent] perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat tip-bot for Peter Zijlstra
2011-01-23 18:00 ` [tip:perf/urgent] perf test: Fix build on older glibcs tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:01 ` [tip:perf/urgent] perf tools: Add missing header, fixes build tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:02 ` [tip:perf/urgent] perf tools: Fix build when using gcc 3.4.6 tip-bot for Arnaldo Carvalho de Melo
2011-01-23 18:02 ` [tip:perf/urgent] perf tools: Fix build by checking if extra warnings are supported tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evsel: Introduce perf_evlist tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evlist: Adopt the pollfd array tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:14 ` [tip:perf/core] perf evsel: Support event groups tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf evsel: Allow specifying if the inherit bit should be set tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf top: Use perf_evsel__open tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:15 ` [tip:perf/core] perf record: " tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:16 ` [tip:perf/core] perf evsel: Introduce mmap support tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:16 ` [tip:perf/core] perf record: Use struct perf_mmap and helpers tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf record: Move perf_mmap__write_tail to perf.h tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf evlist: Move the mmap array from perf_evsel tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:17 ` [tip:perf/core] perf record: Use perf_evlist__mmap tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:18 ` [tip:perf/core] perf tools: Add missing cpu_map__delete() tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:18 ` [tip:perf/core] perf test: Check counts on all cpus in test__open_syscall_event_on_all_cpus tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:19 ` [tip:perf/core] perf evlist: Steal mmap reading routine from 'perf top' tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:19 ` [tip:perf/core] perf test: Add test for the evlist mmap routines tip-bot for Arnaldo Carvalho de Melo
2011-01-26 7:21 ` [tip:perf/core] perf top: Add native_safe_halt to skip symbols tip-bot for Arnaldo Carvalho de Melo
2009-08-04 8:32 ` [patch] perf tools: allow top users to switch between weighted and individual counter display Ingo Molnar
2009-08-04 8:46 ` Mike Galbraith
2009-08-04 8:56 ` Ingo Molnar
2009-08-04 11:36 ` [tip:perfcounters/core] perf top: Improve interactive key handling tip-bot for Mike Galbraith
2009-08-02 13:11 ` [tip:perfcounters/core] perf_counter tools: Allow top users to switch between weighted and individual counter display tip-bot for Mike Galbraith
2009-11-12 10:07 [patch] sched: fix/add missing update_rq_clock() calls Mike Galbraith
2009-11-12 11:01 ` Peter Zijlstra
2009-11-12 11:27 ` Ingo Molnar
2009-11-12 11:29 ` Peter Zijlstra
2009-11-12 11:34 ` Ingo Molnar
2009-11-12 11:36 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090803070458.GA27581@elte.hu \
--to=mingo@elte.hu \
--cc=ego@in.ibm.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=paulmck@linux.vnet.ibm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.