[ 0.000000] Linux version 2.6.31-rc6-tip-01322-gd685ec8-dirty (mingo@europe) (gcc version 4.2.2) #7600 SMP Fri Aug 21 22:20:30 CEST 2009 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) [ 0.000000] BIOS-e820: 000000007f6e0000 - 000000007f6f3000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6f3000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7f6e0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007f6e0000 (usable) [ 0.000000] modified: 000000007f6e0000 - 000000007f6f3000 (ACPI data) [ 0.000000] modified: 000000007f6f3000 - 000000007f700000 (ACPI NVS) [ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 02600000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000375fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00375fe000 page 4k [ 0.000000] kernel direct mapping tables up to 375fe000 @ 100000-2c1000 [ 0.000000] ACPI: RSDP 000f68a0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 7f6e631f 00074 (v01 LENOVO TP-79 00001020 LTP 00000000) [ 0.000000] ACPI: FACP 7f6e6400 000F4 (v03 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 7f6e65e7 0C765 (v01 LENOVO TP-79 00001020 MSFT 0100000E) [ 0.000000] ACPI: FACS 7f6f4000 00040 [ 0.000000] ACPI: SSDT 7f6e65b4 00033 (v01 LENOVO TP-79 00001020 MSFT 0100000E) [ 0.000000] ACPI: ECDT 7f6f2d4c 00052 (v01 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: TCPA 7f6f2d9e 00032 (v02 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: APIC 7f6f2dd0 00068 (v01 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: MCFG 7f6f2e38 0003E (v01 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: HPET 7f6f2e76 00038 (v01 LENOVO TP-79 00001020 LNVO 00000001) [ 0.000000] ACPI: BOOT 7f6f2fd8 00028 (v01 LENOVO TP-79 00001020 LTP 00000001) [ 0.000000] ACPI: SSDT 7f6e58da 00507 (v01 LENOVO TP-79 00001020 INTL 20050513) [ 0.000000] ACPI: SSDT 7f6e5702 001D8 (v01 LENOVO TP-79 00001020 INTL 20050513) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f68e0] f68e0 [ 0.000000] could not find any ACPI SRAT memory areas. [ 0.000000] failed to get NUMA memory information from SRAT table [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 7f6e0 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 [ 0.000000] node 0 pfn: [0 - 7f6e0] [ 0.000000] Reserving 7680 pages of KVA for lmem_map of node 0 at 7d800 [ 0.000000] remove_active_range (0, 514048, 521728) [ 0.000000] Reserving total of 1e00 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 35600 max_low_pfn ~ 375fe [ 0.000000] max_pfn = 7f6e0 [ 0.000000] 1152MB HIGHMEM available. [ 0.000000] 885MB LOWMEM available. [ 0.000000] max_low_pfn = 375fe, highstart_pfn = 375fe [ 0.000000] Low memory ends at vaddr f75fe000 [ 0.000000] node 0 will remap to vaddr f5600000 - f7400000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f5600000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f5600000 to pfn 0007d800 [ 0.000000] remap_numa_kva: f5800000 to pfn 0007da00 [ 0.000000] remap_numa_kva: f5a00000 to pfn 0007dc00 [ 0.000000] remap_numa_kva: f5c00000 to pfn 0007de00 [ 0.000000] remap_numa_kva: f5e00000 to pfn 0007e000 [ 0.000000] remap_numa_kva: f6000000 to pfn 0007e200 [ 0.000000] remap_numa_kva: f6200000 to pfn 0007e400 [ 0.000000] remap_numa_kva: f6400000 to pfn 0007e600 [ 0.000000] remap_numa_kva: f6600000 to pfn 0007e800 [ 0.000000] remap_numa_kva: f6800000 to pfn 0007ea00 [ 0.000000] remap_numa_kva: f6a00000 to pfn 0007ec00 [ 0.000000] remap_numa_kva: f6c00000 to pfn 0007ee00 [ 0.000000] remap_numa_kva: f6e00000 to pfn 0007f000 [ 0.000000] remap_numa_kva: f7000000 to pfn 0007f200 [ 0.000000] remap_numa_kva: f7200000 to pfn 0007f400 [ 0.000000] High memory starts at vaddr f75fe000 [ 0.000000] mapped low ram: 0 - 375fe000 [ 0.000000] low ram: 0 - 375fe000 [ 0.000000] node 0 low ram: 00000000 - 375fe000 [ 0.000000] node 0 bootmap 00007000 - 0000dec0 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 00375fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 0002177994] TEXT DATA BSS ==> [0001000000 - 0002177994] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0002178000 - 000218b138] BRK ==> [0002178000 - 000218b138] [ 0.000000] #6 [0000100000 - 00002ab000] PGTABLE ==> [0000100000 - 00002ab000] [ 0.000000] #7 [007d800000 - 007f600000] KVA RAM [ 0.000000] #8 [0035600000 - 0037400000] KVA PG ==> [0035600000 - 0037400000] [ 0.000000] #9 [0000007000 - 000000e000] BOOTMAP ==> [0000007000 - 000000e000] [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f68e0] f68e0 [ 0.000000] mpc: 9f5a1-9f6b5 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000375fe [ 0.000000] HighMem 0x000375fe -> 0x0007f6e0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007d800 [ 0.000000] 0: 0x0007f600 -> 0x0007f6e0 [ 0.000000] On node 0 totalpages: 514171 [ 0.000000] free_area_init_node: node 0, pgdat f5600000, node_mem_map f5602000 [ 0.000000] DMA zone: 60 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3935 pages, LIFO batch:0 [ 0.000000] Normal zone: 3263 pages used for memmap [ 0.000000] Normal zone: 219455 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4324 pages used for memmap [ 0.000000] HighMem zone: 283134 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:16 [ 0.000000] PERCPU: Embedded 338 pages at c21af000, static data 1361404 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506524 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/sda1 console=tty profile=0 debug initcall_debug enforcing=0 apic=verbose sysrq_always_enabled ignore_loglevel selinux=1 relaxed_check=1 3 netconsole=4444@10.0.1.15/eth0,4444@10.0.1.21/00:30:48:c6:86:26 [ 0.000000] kernel profiling enabled (shift: 0) [ 0.000000] debug: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000375fe:0007f6e0) [ 0.000000] Memory: 2002628k/2087808k available (5870k kernel code, 54052k reserved, 3082k data, 1828k init, 1149832k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffad6000 - 0xfffff000 (5284 kB) [ 0.000000] pkmap : 0xff600000 - 0xff800000 (2048 kB) [ 0.000000] vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) [ 0.000000] .init : 0xc18c5000 - 0xc1a8e000 (1828 kB) [ 0.000000] .data : 0xc15bbab4 - 0xc18be338 (3082 kB) [ 0.000000] .text : 0xc1000000 - 0xc15bbab4 (5870 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=16 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] CPU 0 irqstacks, hard=c21af000 soft=c21b0000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1828.877 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000999] ... MAX_LOCK_DEPTH: 48 [ 0.000999] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000999] ... CLASSHASH_SIZE: 4096 [ 0.000999] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000999] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000999] ... CHAINHASH_SIZE: 16384 [ 0.000999] memory used by lock dependency info: 3823 kB [ 0.000999] per task-struct memory footprint: 1920 bytes [ 0.001032] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.75 BogoMIPS (lpj=1828877) [ 0.001305] Security Framework initialized [ 0.001370] TOMOYO Linux initialized [ 0.001609] Mount-cache hash table entries: 512 [ 0.003960] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004043] CPU: L2 cache: 2048K [ 0.004101] CPU: Physical Processor ID: 0 [ 0.004156] CPU: Processor Core ID: 0 [ 0.004213] mce: CPU supports 6 MCE banks [ 0.004282] using mwait in idle threads. [ 0.004346] Performance Counters: no PMU driver, software counters only. [ 0.004428] Checking 'hlt' instruction... OK. [ 0.010564] ACPI: Core revision 20090521 [ 0.196281] enabled ExtINT on CPU#0 [ 0.196591] ESR value before enabling vector: 0x00000040 after: 0x00000000 [ 0.196683] Mapping cpu 0 to node 0 [ 0.196769] ENABLING IO-APIC IRQs [ 0.196854] init IO_APIC IRQs [ 0.196939] 1-0 (apicid-pin) not connected [ 0.197054] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.197196] IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.197336] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.197477] IOAPIC[0]: Set routing entry (1-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.197617] IOAPIC[0]: Set routing entry (1-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.197756] IOAPIC[0]: Set routing entry (1-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.197898] IOAPIC[0]: Set routing entry (1-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.198017] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.198157] IOAPIC[0]: Set routing entry (1-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.198298] IOAPIC[0]: Set routing entry (1-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.198439] IOAPIC[0]: Set routing entry (1-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.198579] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.198719] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.198860] IOAPIC[0]: Set routing entry (1-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.199017] IOAPIC[0]: Set routing entry (1-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.199148] 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 (apicid-pin) not connected [ 0.199866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.210078] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 0.210258] Using local APIC timer interrupts. [ 0.210259] calibrating APIC timer ... [ 0.210999] ... lapic delta = 1038908 [ 0.210999] ... PM-Timer delta = 357901 [ 0.210999] ... PM-Timer result ok [ 0.210999] ..... delta 1038908 [ 0.210999] ..... mult: 44627542 [ 0.210999] ..... calibration result: 166225 [ 0.210999] ..... CPU clock speed is 1828.0479 MHz. [ 0.210999] ..... host bus clock speed is 166.0225 MHz. [ 0.210999] calling migration_init+0x0/0x50 @ 1 [ 0.210999] initcall migration_init+0x0/0x50 returned 0 after 0 usecs [ 0.210999] calling spawn_ksoftirqd+0x0/0x50 @ 1 [ 0.210999] initcall spawn_ksoftirqd+0x0/0x50 returned 0 after 0 usecs [ 0.210999] calling init_call_single_data+0x0/0x90 @ 1 [ 0.210999] initcall init_call_single_data+0x0/0x90 returned 0 after 0 usecs [ 0.210999] calling spawn_softlockup_task+0x0/0x70 @ 1 [ 0.211123] initcall spawn_softlockup_task+0x0/0x70 returned 0 after 976 usecs [ 0.211253] calling tracer_alloc_buffers+0x0/0x130 @ 1 [ 0.211474] initcall tracer_alloc_buffers+0x0/0x130 returned 0 after 0 usecs [ 0.211568] calling init_trace_printk+0x0/0x10 @ 1 [ 0.211659] initcall init_trace_printk+0x0/0x10 returned 0 after 0 usecs [ 0.213101] lockdep: fixing up alternatives. [ 0.213410] CPU 1 irqstacks, hard=c2301000 soft=c2302000 [ 0.213502] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] masked ExtINT on CPU#1 [ 0.000999] Mapping cpu 1 to node 0 [ 0.000999] Calibrating delay using timer specific routine.. 3657.01 BogoMIPS (lpj=1828507) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 2048K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.284613] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 0.285149] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.285999] Measured 580294 cycles TSC warp between CPUs, turning off TSC clock. [ 0.285999] Marking TSC unstable due to check_tsc_sync_source failed [ 0.287132] Brought up 2 CPUs [ 0.287221] Total of 2 processors activated (7314.76 BogoMIPS). [ 0.288250] PM: Adding info for No Bus:platform [ 0.289091] khelper used greatest stack depth: 2408 bytes left [ 0.290709] calling init_mmap_min_addr+0x0/0x10 @ 1 [ 0.290801] initcall init_mmap_min_addr+0x0/0x10 returned 0 after 0 usecs [ 0.290894] calling init_cpufreq_transition_notifier_list+0x0/0x20 @ 1 [ 0.290991] initcall init_cpufreq_transition_notifier_list+0x0/0x20 returned 0 after 0 usecs [ 0.291010] calling net_ns_init+0x0/0xe0 @ 1 [ 0.291303] initcall net_ns_init+0x0/0xe0 returned 0 after 0 usecs [ 0.291397] calling cpufreq_tsc+0x0/0x30 @ 1 [ 0.291485] initcall cpufreq_tsc+0x0/0x30 returned 0 after 0 usecs [ 0.291578] calling pci_reboot_init+0x0/0x20 @ 1 [ 0.291669] initcall pci_reboot_init+0x0/0x20 returned 0 after 0 usecs [ 0.291760] calling reboot_init+0x0/0x20 @ 1 [ 0.291854] initcall reboot_init+0x0/0x20 returned 0 after 0 usecs [ 0.292038] calling init_lapic_sysfs+0x0/0x30 @ 1 [ 0.292681] initcall init_lapic_sysfs+0x0/0x30 returned 0 after 0 usecs [ 0.292775] calling print_banner+0x0/0x10 @ 1 [ 0.292863] Booting paravirtualized kernel on bare hardware [ 0.293024] initcall print_banner+0x0/0x10 returned 0 after 976 usecs [ 0.293119] calling init_smp_flush+0x0/0x50 @ 1 [ 0.294006] initcall init_smp_flush+0x0/0x50 returned 0 after 0 usecs [ 0.294099] calling alloc_frozen_cpus+0x0/0x10 @ 1 [ 0.294189] initcall alloc_frozen_cpus+0x0/0x10 returned 0 after 0 usecs [ 0.294282] calling sysctl_init+0x0/0x30 @ 1 [ 0.294672] initcall sysctl_init+0x0/0x30 returned 0 after 0 usecs [ 0.294764] calling ksysfs_init+0x0/0xa0 @ 1 [ 0.294927] initcall ksysfs_init+0x0/0xa0 returned 0 after 0 usecs [ 0.295006] calling async_init+0x0/0x50 @ 1 [ 0.295095] initcall async_init+0x0/0x50 returned 0 after 0 usecs [ 0.295187] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 0.295300] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 usecs [ 0.295430] calling pm_init+0x0/0x30 @ 1 [ 0.295569] initcall pm_init+0x0/0x30 returned 0 after 0 usecs [ 0.295660] calling init_hw_breakpoint+0x0/0x10 @ 1 [ 0.295752] initcall init_hw_breakpoint+0x0/0x10 returned 0 after 0 usecs [ 0.295845] calling filelock_init+0x0/0x30 @ 1 [ 0.295941] initcall filelock_init+0x0/0x30 returned 0 after 0 usecs [ 0.296005] calling init_misc_binfmt+0x0/0x50 @ 1 [ 0.296112] initcall init_misc_binfmt+0x0/0x50 returned 0 after 0 usecs [ 0.296204] calling init_script_binfmt+0x0/0x20 @ 1 [ 0.296294] initcall init_script_binfmt+0x0/0x20 returned 0 after 0 usecs [ 0.296387] calling init_elf_binfmt+0x0/0x20 @ 1 [ 0.296477] initcall init_elf_binfmt+0x0/0x20 returned 0 after 0 usecs [ 0.296568] calling debugfs_init+0x0/0x50 @ 1 [ 0.296686] initcall debugfs_init+0x0/0x50 returned 0 after 0 usecs [ 0.296777] calling securityfs_init+0x0/0x50 @ 1 [ 0.296893] initcall securityfs_init+0x0/0x50 returned 0 after 0 usecs [ 0.297008] calling random32_init+0x0/0xd0 @ 1 [ 0.297098] initcall random32_init+0x0/0xd0 returned 0 after 0 usecs [ 0.297190] calling regulator_init+0x0/0x30 @ 1 [ 0.297278] regulator: core version 0.5 [ 0.297635] initcall regulator_init+0x0/0x30 returned 0 after 0 usecs [ 0.297730] calling early_resume_init+0x0/0x1c0 @ 1 [ 0.297846] Time: 20:21:23 Date: 08/21/09 [ 0.297934] initcall early_resume_init+0x0/0x1c0 returned 0 after 0 usecs [ 0.298038] calling cpufreq_core_init+0x0/0x70 @ 1 [ 0.298130] initcall cpufreq_core_init+0x0/0x70 returned 0 after 0 usecs [ 0.298222] calling cpuidle_init+0x0/0x40 @ 1 [ 0.298344] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs [ 0.298436] calling sock_init+0x0/0x60 @ 1 [ 0.298832] initcall sock_init+0x0/0x60 returned 0 after 0 usecs [ 0.299006] calling net_inuse_init+0x0/0x30 @ 1 [ 0.299114] initcall net_inuse_init+0x0/0x30 returned 0 after 0 usecs [ 0.299206] calling netpoll_init+0x0/0x40 @ 1 [ 0.299294] initcall netpoll_init+0x0/0x40 returned 0 after 0 usecs [ 0.299385] calling netlink_proto_init+0x0/0x1b0 @ 1 [ 0.299652] NET: Registered protocol family 16 [ 0.299855] initcall netlink_proto_init+0x0/0x1b0 returned 0 after 0 usecs [ 0.299948] calling bdi_class_init+0x0/0x40 @ 1 [ 0.300534] initcall bdi_class_init+0x0/0x40 returned 0 after 0 usecs [ 0.300627] calling kobject_uevent_init+0x0/0x60 @ 1 [ 0.300741] initcall kobject_uevent_init+0x0/0x60 returned 0 after 0 usecs [ 0.300834] calling pcibus_class_init+0x0/0x20 @ 1 [ 0.301303] initcall pcibus_class_init+0x0/0x20 returned 0 after 976 usecs [ 0.301397] calling pci_driver_init+0x0/0x10 @ 1 [ 0.301843] initcall pci_driver_init+0x0/0x10 returned 0 after 0 usecs [ 0.301936] calling backlight_class_init+0x0/0x60 @ 1 [ 0.302380] initcall backlight_class_init+0x0/0x60 returned 0 after 0 usecs [ 0.302474] calling tty_class_init+0x0/0x30 @ 1 [ 0.302861] initcall tty_class_init+0x0/0x30 returned 0 after 0 usecs [ 0.302953] calling vtconsole_class_init+0x0/0xe0 @ 1 [ 0.303425] PM: Adding info for No Bus:vtcon0 [ 0.303852] initcall vtconsole_class_init+0x0/0xe0 returned 0 after 0 usecs [ 0.304071] calling register_node_type+0x0/0x70 @ 1 [ 0.304490] initcall register_node_type+0x0/0x70 returned 0 after 0 usecs [ 0.304584] calling eisa_init+0x0/0x30 @ 1 [ 0.305089] EISA bus registered [ 0.305178] initcall eisa_init+0x0/0x30 returned 0 after 976 usecs [ 0.305270] calling amd_postcore_init+0x0/0x70 @ 1 [ 0.305360] initcall amd_postcore_init+0x0/0x70 returned 0 after 0 usecs [ 0.305452] calling arch_kdebugfs_init+0x0/0x20 @ 1 [ 0.305564] initcall arch_kdebugfs_init+0x0/0x20 returned 0 after 0 usecs [ 0.305658] calling init_pit_clocksource+0x0/0xb0 @ 1 [ 0.305748] initcall init_pit_clocksource+0x0/0xb0 returned 0 after 0 usecs [ 0.305841] calling mtrr_if_init+0x0/0x60 @ 1 [ 0.305949] initcall mtrr_if_init+0x0/0x60 returned 0 after 0 usecs [ 0.306016] calling ffh_cstate_init+0x0/0x30 @ 1 [ 0.306108] initcall ffh_cstate_init+0x0/0x30 returned 0 after 0 usecs [ 0.306201] calling acpi_pci_init+0x0/0x60 @ 1 [ 0.306302] ACPI: bus type pci registered [ 0.306391] initcall acpi_pci_init+0x0/0x60 returned 0 after 0 usecs [ 0.306483] calling dmi_id_init+0x0/0x2f0 @ 1 [ 0.307207] PM: Adding info for No Bus:id [ 0.307723] initcall dmi_id_init+0x0/0x2f0 returned 0 after 976 usecs [ 0.307816] calling init_cyclone_clocksource+0x0/0x200 @ 1 [ 0.307907] initcall init_cyclone_clocksource+0x0/0x200 returned -19 after 0 usecs [ 0.308007] calling pci_arch_init+0x0/0x50 @ 1 [ 0.308228] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24 [ 0.308318] PCI: Using configuration type 1 for base access [ 0.308417] initcall pci_arch_init+0x0/0x50 returned 0 after 0 usecs [ 0.308509] calling topology_init+0x0/0x80 @ 1 [ 0.309710] initcall topology_init+0x0/0x80 returned 0 after 976 usecs [ 0.309803] calling mtrr_init_finialize+0x0/0x40 @ 1 [ 0.309894] initcall mtrr_init_finialize+0x0/0x40 returned 0 after 0 usecs [ 0.309987] calling param_sysfs_init+0x0/0x230 @ 1 [ 0.369106] initcall param_sysfs_init+0x0/0x230 returned 0 after 57617 usecs [ 0.369209] calling pm_sysrq_init+0x0/0x20 @ 1 [ 0.369323] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs [ 0.369416] calling audit_watch_init+0x0/0x30 @ 1 [ 0.369512] initcall audit_watch_init+0x0/0x30 returned 0 after 0 usecs [ 0.369606] calling init_slow_work+0x0/0x40 @ 1 [ 0.369694] initcall init_slow_work+0x0/0x40 returned 0 after 0 usecs [ 0.369787] calling default_bdi_init+0x0/0x40 @ 1 [ 0.370157] PM: Adding info for No Bus:default [ 0.370617] initcall default_bdi_init+0x0/0x40 returned 0 after 976 usecs [ 0.370711] calling init_bio+0x0/0x130 @ 1 [ 0.371227] bio: create slab at 0 [ 0.371417] initcall init_bio+0x0/0x130 returned 0 after 976 usecs [ 0.371509] calling fsnotify_init+0x0/0x10 @ 1 [ 0.371601] initcall fsnotify_init+0x0/0x10 returned 0 after 0 usecs [ 0.371694] calling fsnotify_notification_init+0x0/0x70 @ 1 [ 0.371800] initcall fsnotify_notification_init+0x0/0x70 returned 0 after 0 usecs [ 0.371931] calling cryptomgr_init+0x0/0x10 @ 1 [ 0.372007] initcall cryptomgr_init+0x0/0x10 returned 0 after 0 usecs [ 0.372100] calling blk_settings_init+0x0/0x20 @ 1 [ 0.372189] initcall blk_settings_init+0x0/0x20 returned 0 after 0 usecs [ 0.372282] calling blk_ioc_init+0x0/0x30 @ 1 [ 0.372379] initcall blk_ioc_init+0x0/0x30 returned 0 after 0 usecs [ 0.372471] calling blk_softirq_init+0x0/0x60 @ 1 [ 0.372562] initcall blk_softirq_init+0x0/0x60 returned 0 after 0 usecs [ 0.372654] calling genhd_device_init+0x0/0x50 @ 1 [ 0.373164] initcall genhd_device_init+0x0/0x50 returned 0 after 976 usecs [ 0.373258] calling blk_dev_integrity_init+0x0/0x30 @ 1 [ 0.373356] initcall blk_dev_integrity_init+0x0/0x30 returned 0 after 0 usecs [ 0.373451] calling pci_slot_init+0x0/0x50 @ 1 [ 0.373567] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs [ 0.373660] calling acpi_init+0x0/0x260 @ 1 [ 0.383829] ACPI: EC: EC description table is found, configuring boot EC [ 0.525999] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.551761] ACPI: Interpreter enabled [ 0.551856] ACPI: (supports S0 S3 S5) [ 0.552390] ACPI: Using IOAPIC for interrupt routing [ 0.553767] PM: Adding info for acpi:LNXSYSTM:00 [ 0.554339] PM: Adding info for acpi:LNXPWRBN:00 [ 0.555040] PM: Adding info for acpi:LNXCPU:00 [ 0.555766] PM: Adding info for acpi:LNXCPU:01 [ 0.556763] PM: Adding info for acpi:device:00 [ 0.560946] PM: Adding info for acpi:PNP0C0F:00 [ 0.565177] PM: Adding info for acpi:PNP0C0F:01 [ 0.569669] PM: Adding info for acpi:PNP0C0F:02 [ 0.573936] PM: Adding info for acpi:PNP0C0F:03 [ 0.578142] PM: Adding info for acpi:PNP0C0F:04 [ 0.582601] PM: Adding info for acpi:PNP0C0F:05 [ 0.586881] PM: Adding info for acpi:PNP0C0F:06 [ 0.591085] PM: Adding info for acpi:PNP0C0F:07 [ 0.592231] PM: Adding info for acpi:PNP0C01:00 [ 0.595690] PM: Adding info for acpi:PNP0C0D:00 [ 0.598885] PM: Adding info for acpi:PNP0C0E:00 [ 0.599971] PM: Adding info for acpi:PNP0A08:00 [ 0.601104] PM: Adding info for acpi:device:01 [ 0.601840] PM: Adding info for acpi:PNP0C02:00 [ 0.603061] PM: Adding info for acpi:PNP0000:00 [ 0.604058] PM: Adding info for acpi:PNP0100:00 [ 0.606350] PM: Adding info for acpi:PNP0103:00 [ 0.607369] PM: Adding info for acpi:PNP0200:00 [ 0.608377] PM: Adding info for acpi:PNP0800:00 [ 0.609445] PM: Adding info for acpi:PNP0C04:00 [ 0.610474] PM: Adding info for acpi:PNP0B00:00 [ 0.611496] PM: Adding info for acpi:PNP0303:00 [ 0.612544] PM: Adding info for acpi:IBM0057:00 [ 0.624027] PM: Adding info for acpi:IBM0071:00 [ 0.625877] PM: Adding info for acpi:PNP0C09:00 [ 0.626921] PM: Adding info for acpi:LNXPOWER:00 [ 0.630326] PM: Adding info for acpi:PNP0C0A:00 [ 0.632969] PM: Adding info for acpi:ACPI0003:00 [ 0.634440] PM: Adding info for acpi:IBM0068:00 [ 0.635970] PM: Adding info for acpi:device:02 [ 0.636701] PM: Adding info for acpi:device:03 [ 0.637497] PM: Adding info for acpi:device:04 [ 0.638233] PM: Adding info for acpi:device:05 [ 0.638978] PM: Adding info for acpi:device:06 [ 0.639835] PM: Adding info for acpi:device:07 [ 0.640658] PM: Adding info for acpi:device:08 [ 0.641394] PM: Adding info for acpi:device:09 [ 0.642637] PM: Adding info for acpi:device:0a [ 0.643908] PM: Adding info for acpi:device:0b [ 0.644894] PM: Adding info for acpi:device:0c [ 0.645871] PM: Adding info for acpi:device:0d [ 0.646615] PM: Adding info for acpi:device:0e [ 0.647589] PM: Adding info for acpi:device:0f [ 0.648321] PM: Adding info for acpi:device:10 [ 0.649302] PM: Adding info for acpi:device:11 [ 0.650327] PM: Adding info for acpi:device:12 [ 0.651082] PM: Adding info for acpi:device:13 [ 0.651955] PM: Adding info for acpi:device:14 [ 0.655649] PM: Adding info for acpi:device:15 [ 0.656770] PM: Adding info for acpi:device:16 [ 0.658095] PM: Adding info for acpi:device:17 [ 0.658862] PM: Adding info for acpi:device:18 [ 0.665721] PM: Adding info for acpi:device:19 [ 0.667376] PM: Adding info for acpi:device:1a [ 0.668114] PM: Adding info for acpi:device:1b [ 0.668962] PM: Adding info for acpi:device:1c [ 0.672080] PM: Adding info for acpi:device:1d [ 0.672828] PM: Adding info for acpi:device:1e [ 0.673539] PM: Adding info for acpi:device:1f [ 0.674281] PM: Adding info for acpi:device:20 [ 0.676787] PM: Adding info for acpi:device:21 [ 0.677537] PM: Adding info for acpi:device:22 [ 0.678357] PM: Adding info for acpi:device:23 [ 0.679067] PM: Adding info for acpi:device:24 [ 0.680240] PM: Adding info for acpi:device:25 [ 0.684794] PM: Adding info for acpi:LNXTHERM:00 [ 0.685501] PM: Adding info for acpi:LNXTHERM:01 [ 0.686202] PM: Adding info for acpi:LNXTHERM:02 [ 0.688428] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.688521] ACPI: EC: driver started in interrupt mode [ 0.690102] ACPI: Power Resource [PUBS] (on) [ 0.691266] initcall acpi_init+0x0/0x260 returned 0 after 310546 usecs [ 0.691359] calling dock_init+0x0/0x80 @ 1 [ 0.692706] PM: Adding info for platform:dock.0 [ 0.701856] PM: Adding info for platform:dock.1 [ 0.709013] PM: Adding info for platform:dock.2 [ 0.719529] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.719623] initcall dock_init+0x0/0x80 returned 0 after 27343 usecs [ 0.719716] calling acpi_pci_root_init+0x0/0x30 @ 1 [ 0.720025] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.720421] PM: Adding info for No Bus:pci0000:00 [ 0.720674] PM: Adding info for No Bus:0000:00 [ 0.721539] PCI: Scanning bus 0000:00 [ 0.721694] pci 0000:00:00.0: found [8086:27a0] class 000600 header type 00 [ 0.721846] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.721972] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.722074] pci 0000:00:02.0: found [8086:27a2] class 000300 header type 00 [ 0.722198] pci 0000:00:02.0: reg 10 32bit mmio: [0xee100000-0xee17ffff] [ 0.722296] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] [ 0.722393] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff] [ 0.722492] pci 0000:00:02.0: reg 1c 32bit mmio: [0xee200000-0xee23ffff] [ 0.722608] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.722702] pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.722867] pci 0000:00:02.1: found [8086:27a6] class 000380 header type 00 [ 0.723027] pci 0000:00:02.1: reg 10 32bit mmio: [0xee180000-0xee1fffff] [ 0.723163] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1f0 [ 0.723256] pci 0000:00:02.1: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.723512] pci 0000:00:1b.0: found [8086:27d8] class 000403 header type 00 [ 0.723648] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee240000-0xee243fff] [ 0.723795] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.723888] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.724060] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.724156] pci 0000:00:1b.0: PME# disabled [ 0.724302] pci 0000:00:1c.0: found [8086:27d0] class 000604 header type 01 [ 0.724439] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.724532] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.724689] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.724784] pci 0000:00:1c.0: PME# disabled [ 0.724935] pci 0000:00:1c.1: found [8086:27d2] class 000604 header type 01 [ 0.725049] pci 0000:00:1c.1: calling quirk_resource_alignment+0x0/0x1f0 [ 0.725143] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.725300] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.725396] pci 0000:00:1c.1: PME# disabled [ 0.725546] pci 0000:00:1c.2: found [8086:27d4] class 000604 header type 01 [ 0.725682] pci 0000:00:1c.2: calling quirk_resource_alignment+0x0/0x1f0 [ 0.725774] pci 0000:00:1c.2: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.725932] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.726011] pci 0000:00:1c.2: PME# disabled [ 0.726162] pci 0000:00:1c.3: found [8086:27d6] class 000604 header type 01 [ 0.726299] pci 0000:00:1c.3: calling quirk_resource_alignment+0x0/0x1f0 [ 0.726393] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.726551] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.726646] pci 0000:00:1c.3: PME# disabled [ 0.726800] pci 0000:00:1d.0: found [8086:27c8] class 000c03 header type 00 [ 0.727037] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.727153] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.727247] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.727383] pci 0000:00:1d.1: found [8086:27c9] class 000c03 header type 00 [ 0.727534] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.727651] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x1f0 [ 0.727744] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.727878] pci 0000:00:1d.2: found [8086:27ca] class 000c03 header type 00 [ 0.728036] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.728152] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x1f0 [ 0.728245] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.728377] pci 0000:00:1d.3: found [8086:27cb] class 000c03 header type 00 [ 0.728529] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] [ 0.728646] pci 0000:00:1d.3: calling quirk_resource_alignment+0x0/0x1f0 [ 0.728740] pci 0000:00:1d.3: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.728895] pci 0000:00:1d.7: found [8086:27cc] class 000c03 header type 00 [ 0.729040] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee444000-0xee4443ff] [ 0.729197] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x1f0 [ 0.729290] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.729421] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.729518] pci 0000:00:1d.7: PME# disabled [ 0.729658] pci 0000:00:1e.0: found [8086:2448] class 000604 header type 01 [ 0.729804] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.729898] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.730082] pci 0000:00:1f.0: found [8086:27b9] class 000601 header type 00 [ 0.730290] pci 0000:00:1f.0: calling quirk_ich7_lpc+0x0/0x60 [ 0.730387] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.730521] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.730616] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.730748] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.730881] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.731009] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.731102] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.731281] pci 0000:00:1f.1: found [8086:27df] class 000101 header type 00 [ 0.731394] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.731493] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.731594] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.731693] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.731793] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.731911] pci 0000:00:1f.1: calling quirk_resource_alignment+0x0/0x1f0 [ 0.732006] pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.732153] pci 0000:00:1f.2: found [8086:27c5] class 000106 header type 00 [ 0.732291] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7] [ 0.732391] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7] [ 0.732492] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf] [ 0.732592] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3] [ 0.732692] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf] [ 0.732793] pci 0000:00:1f.2: reg 24 32bit mmio: [0xee444400-0xee4447ff] [ 0.732902] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x1f0 [ 0.733006] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.733143] pci 0000:00:1f.2: PME# supported from D3hot [ 0.733237] pci 0000:00:1f.2: PME# disabled [ 0.733373] pci 0000:00:1f.3: found [8086:27da] class 000c05 header type 00 [ 0.733534] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.733655] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x1f0 [ 0.733749] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.733866] PCI: Fixups for bus 0000:00 [ 0.733957] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0 [ 0.734034] PCI: Scanning bus 0000:02 [ 0.734185] pci 0000:02:00.0: found [8086:109a] class 000200 header type 00 [ 0.734328] pci 0000:02:00.0: reg 10 32bit mmio: [0xee000000-0xee01ffff] [ 0.734451] pci 0000:02:00.0: reg 18 io port: [0x2000-0x201f] [ 0.734612] pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.734706] pci 0000:02:00.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.734881] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.735012] pci 0000:02:00.0: PME# disabled [ 0.735240] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.735658] PCI: Fixups for bus 0000:02 [ 0.735750] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.735845] pci 0000:00:1c.0: bridge 32bit mmio: [0xee000000-0xee0fffff] [ 0.735947] PCI: Bus scan for 0000:02 returning with max=02 [ 0.736011] pci 0000:00:1c.1: scanning behind bridge, config 030300, pass 0 [ 0.736130] PCI: Scanning bus 0000:03 [ 0.736350] pci 0000:03:00.0: found [8086:4227] class 000280 header type 00 [ 0.736566] pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff] [ 0.736865] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.737006] pci 0000:03:00.0: calling pci_fixup_transparent_bridge+0x0/0x30 [ 0.737271] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.737414] pci 0000:03:00.0: PME# disabled [ 0.737646] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.738164] PCI: Fixups for bus 0000:03 [ 0.738256] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff] [ 0.738351] pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff] [ 0.738452] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff] [ 0.738545] PCI: Bus scan for 0000:03 returning with max=03 [ 0.738640] pci 0000:00:1c.2: scanning behind bridge, config 0b0400, pass 0 [ 0.738759] PCI: Scanning bus 0000:04 [ 0.739098] PCI: Fixups for bus 0000:04 [ 0.739190] pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff] [ 0.739285] pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff] [ 0.740014] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff] [ 0.740107] PCI: Bus scan for 0000:04 returning with max=04 [ 0.740202] pci 0000:00:1c.3: scanning behind bridge, config 130c00, pass 0 [ 0.740320] PCI: Scanning bus 0000:0c [ 0.740500] PCI: Fixups for bus 0000:0c [ 0.740591] pci 0000:00:1c.3: bridge io port: [0x7000-0x8fff] [ 0.740686] pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff] [ 0.740788] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff] [ 0.740880] PCI: Bus scan for 0000:0c returning with max=0c [ 0.740974] pci 0000:00:1e.0: scanning behind bridge, config 181500, pass 0 [ 0.741030] PCI: Scanning bus 0000:15 [ 0.741161] pci 0000:15:00.0: found [104c:ac56] class 000607 header type 02 [ 0.741296] pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff] [ 0.741397] pci 0000:15:00.0: calling quirk_resource_alignment+0x0/0x1f0 [ 0.741525] pci 0000:15:00.0: supports D1 D2 [ 0.741613] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.741710] pci 0000:15:00.0: PME# disabled [ 0.742013] PCI: Fixups for bus 0000:15 [ 0.742099] pci 0000:00:1e.0: transparent bridge [ 0.742191] pci 0000:00:1e.0: bridge io port: [0x9000-0xcfff] [ 0.742286] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff] [ 0.742388] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff] [ 0.742484] pci 0000:15:00.0: scanning behind bridge, config 181615, pass 0 [ 0.742587] pci 0000:15:00.0: scanning behind bridge, config 181615, pass 1 [ 0.742726] PCI: Bus scan for 0000:15 returning with max=17 [ 0.742822] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1 [ 0.742924] pci 0000:00:1c.1: scanning behind bridge, config 030300, pass 1 [ 0.743014] pci 0000:00:1c.2: scanning behind bridge, config 0b0400, pass 1 [ 0.743117] pci 0000:00:1c.3: scanning behind bridge, config 130c00, pass 1 [ 0.743219] pci 0000:00:1e.0: scanning behind bridge, config 181500, pass 1 [ 0.743319] PCI: Bus scan for 0000:00 returning with max=18 [ 0.743437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.747843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.749442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.751046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.752754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.754473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.763497] PM: Adding info for pci:0000:00:00.0 [ 0.769825] PM: Adding info for pci:0000:00:02.0 [ 0.776847] PM: Adding info for pci:0000:00:02.1 [ 0.783130] PM: Adding info for pci:0000:00:1b.0 [ 0.789756] PM: Adding info for pci:0000:00:1c.0 [ 0.796169] PM: Adding info for pci:0000:00:1c.1 [ 0.802409] PM: Adding info for pci:0000:00:1c.2 [ 0.809061] PM: Adding info for pci:0000:00:1c.3 [ 0.815466] PM: Adding info for pci:0000:00:1d.0 [ 0.821903] PM: Adding info for pci:0000:00:1d.1 [ 0.828484] PM: Adding info for pci:0000:00:1d.2 [ 0.834774] PM: Adding info for pci:0000:00:1d.3 [ 0.841248] PM: Adding info for pci:0000:00:1d.7 [ 0.847445] PM: Adding info for pci:0000:00:1e.0 [ 0.854036] PM: Adding info for pci:0000:00:1f.0 [ 0.860390] PM: Adding info for pci:0000:00:1f.1 [ 0.866797] PM: Adding info for pci:0000:00:1f.2 [ 0.873194] PM: Adding info for pci:0000:00:1f.3 [ 0.873882] PM: Adding info for pci:0000:02:00.0 [ 0.874504] PM: Adding info for No Bus:0000:02 [ 0.875225] PM: Adding info for pci:0000:03:00.0 [ 0.875741] PM: Adding info for No Bus:0000:03 [ 0.876301] PM: Adding info for No Bus:0000:04 [ 0.876836] PM: Adding info for No Bus:0000:0c [ 0.878405] PM: Adding info for pci:0000:15:00.0 [ 0.878926] PM: Adding info for No Bus:0000:16 [ 0.879511] PM: Adding info for No Bus:0000:15 [ 0.880349] initcall acpi_pci_root_init+0x0/0x30 returned 0 after 157226 usecs [ 0.880479] calling acpi_pci_link_init+0x0/0x40 @ 1 [ 0.882896] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.885839] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.888776] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.891719] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.894654] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.897592] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.900540] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.903559] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.904796] initcall acpi_pci_link_init+0x0/0x40 returned 0 after 23437 usecs [ 0.904891] calling pnp_init+0x0/0x10 @ 1 [ 0.905854] initcall pnp_init+0x0/0x10 returned 0 after 976 usecs [ 0.905947] calling misc_init+0x0/0xb0 @ 1 [ 0.906377] initcall misc_init+0x0/0xb0 returned 0 after 0 usecs [ 0.906469] calling init_scsi+0x0/0xa0 @ 1 [ 0.908722] SCSI subsystem initialized [ 0.908812] initcall init_scsi+0x0/0xa0 returned 0 after 1953 usecs [ 0.908903] calling ata_init+0x0/0x3a0 @ 1 [ 0.909302] libata version 3.00 loaded. [ 0.909392] initcall ata_init+0x0/0x3a0 returned 0 after 976 usecs [ 0.909484] calling phy_init+0x0/0x30 @ 1 [ 0.910556] initcall phy_init+0x0/0x30 returned 0 after 976 usecs [ 0.910649] calling usb_init+0x0/0x1a0 @ 1 [ 0.911716] usbcore: registered new interface driver usbfs [ 0.912512] usbcore: registered new interface driver hub [ 0.913062] usbcore: registered new device driver usb [ 0.913153] initcall usb_init+0x0/0x1a0 returned 0 after 2929 usecs [ 0.913246] calling serio_init+0x0/0xa0 @ 1 [ 0.913786] initcall serio_init+0x0/0xa0 returned 0 after 0 usecs [ 0.913879] calling gameport_init+0x0/0xa0 @ 1 [ 0.914536] initcall gameport_init+0x0/0xa0 returned 0 after 976 usecs [ 0.914630] calling input_init+0x0/0x130 @ 1 [ 0.915200] initcall input_init+0x0/0x130 returned 0 after 976 usecs [ 0.915293] calling rtc_init+0x0/0x70 @ 1 [ 0.915679] initcall rtc_init+0x0/0x70 returned 0 after 0 usecs [ 0.915771] calling power_supply_class_init+0x0/0x30 @ 1 [ 0.916245] initcall power_supply_class_init+0x0/0x30 returned 0 after 976 usecs [ 0.916375] calling hwmon_init+0x0/0x100 @ 1 [ 0.916779] initcall hwmon_init+0x0/0x100 returned 0 after 0 usecs [ 0.916872] calling leds_init+0x0/0x40 @ 1 [ 0.917369] initcall leds_init+0x0/0x40 returned 0 after 976 usecs [ 0.917462] calling acpi_wmi_init+0x0/0x70 @ 1 [ 0.917903] ACPI: WMI: Mapper loaded [ 0.917992] initcall acpi_wmi_init+0x0/0x70 returned 0 after 0 usecs [ 0.918098] calling pci_subsys_init+0x0/0x130 @ 1 [ 0.918187] PCI: Using ACPI for IRQ routing [ 0.920253] initcall pci_subsys_init+0x0/0x130 returned 0 after 1953 usecs [ 0.920346] calling proto_init+0x0/0x10 @ 1 [ 0.920458] initcall proto_init+0x0/0x10 returned 0 after 0 usecs [ 0.920549] calling net_dev_init+0x0/0x160 @ 1 [ 0.921766] PM: Adding info for No Bus:lo [ 0.922376] initcall net_dev_init+0x0/0x160 returned 0 after 1953 usecs [ 0.922469] calling neigh_init+0x0/0x80 @ 1 [ 0.922558] initcall neigh_init+0x0/0x80 returned 0 after 0 usecs [ 0.922649] calling fib_rules_init+0x0/0xb0 @ 1 [ 0.922743] initcall fib_rules_init+0x0/0xb0 returned 0 after 0 usecs [ 0.922834] calling pktsched_init+0x0/0xd0 @ 1 [ 0.922958] initcall pktsched_init+0x0/0xd0 returned 0 after 0 usecs [ 0.923071] calling tc_filter_init+0x0/0x60 @ 1 [ 0.923159] initcall tc_filter_init+0x0/0x60 returned 0 after 0 usecs [ 0.923250] calling tc_action_init+0x0/0x60 @ 1 [ 0.923339] initcall tc_action_init+0x0/0x60 returned 0 after 0 usecs [ 0.923430] calling genl_init+0x0/0xd0 @ 1 [ 0.926089] initcall genl_init+0x0/0xd0 returned 0 after 2929 usecs [ 0.926182] calling wanrouter_init+0x0/0x60 @ 1 [ 0.926270] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. [ 0.926455] initcall wanrouter_init+0x0/0x60 returned 0 after 0 usecs [ 0.926547] calling wireless_nlevent_init+0x0/0x40 @ 1 [ 0.926637] initcall wireless_nlevent_init+0x0/0x40 returned 0 after 0 usecs [ 0.926732] calling cfg80211_init+0x0/0x80 @ 1 [ 0.941206] PM: Adding info for platform:regulatory.0 [ 0.941547] cfg80211: Using static regulatory domain info [ 0.941638] cfg80211: Regulatory domain: US [ 0.941725] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.941854] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.941946] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.942006] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.942098] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.942190] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.942283] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.942501] cfg80211: Calling CRDA for country: US [ 0.943128] initcall cfg80211_init+0x0/0x80 returned 0 after 16601 usecs [ 0.943222] calling sysctl_init+0x0/0x40 @ 1 [ 0.943314] initcall sysctl_init+0x0/0x40 returned 0 after 0 usecs [ 0.943407] calling pci_iommu_init+0x0/0x20 @ 1 [ 1.091247] DMA-API: preallocated 32768 debug entries [ 1.091344] DMA-API: debugging enabled by kernel config [ 1.091452] initcall pci_iommu_init+0x0/0x20 returned 0 after 144531 usecs [ 1.091547] calling print_all_ICs+0x0/0x510 @ 1 [ 1.091635] [ 1.091636] printing PIC contents [ 1.091803] ... PIC IMR: ffff [ 1.091890] ... PIC IRR: 0801 [ 1.091984] ... PIC ISR: 0000 [ 1.092009] ... PIC ELCR: 0800 [ 1.092096] printing local APIC contents on CPU#0/0: [ 1.092184] ... APIC ID: 00000000 (0) [ 1.092270] ... APIC VERSION: 00050014 [ 1.092356] ... APIC TASKPRI: 00000000 (00) [ 1.092443] ... APIC PROCPRI: 00000000 [ 1.092529] ... APIC LDR: 01000000 [ 1.092614] ... APIC DFR: ffffffff [ 1.092700] ... APIC SPIV: 000001ff [ 1.092784] ... APIC ISR field: [ 1.092870] 0000000000000000000000000000000000000000000000000000000000000000 [ 1.092999] ... APIC TMR field: [ 1.092999] 0000000002000000000000000000000000000000000000000000000000000000 [ 1.092999] ... APIC IRR field: [ 1.092999] 0000000000000000000000000000000000000000000000000000000000008000 [ 1.092999] ... APIC ESR: 00000000 [ 1.092999] ... APIC ICR: 000008fb [ 1.092999] ... APIC ICR2: 02000000 [ 1.092999] ... APIC LVTT: 000200ef [ 1.092999] ... APIC LVTPC: 00010000 [ 1.092999] ... APIC LVT0: 00010700 [ 1.092999] ... APIC LVT1: 00000400 [ 1.092999] ... APIC LVTERR: 000000fe [ 1.092999] ... APIC TMICT: 00002895 [ 1.092999] ... APIC TMCCT: 000001f0 [ 1.092999] ... APIC TDCR: 00000003 [ 1.092999] [ 1.092997] printing local APIC contents on CPU#1/1: [ 1.092997] ... APIC ID: 01000000 (1) [ 1.092997] ... APIC VERSION: 00050014 [ 1.092997] ... APIC TASKPRI: 00000000 (00) [ 1.092997] ... APIC PROCPRI: 00000000 [ 1.092997] ... APIC LDR: 02000000 [ 1.092997] ... APIC DFR: ffffffff [ 1.092997] ... APIC SPIV: 000001ff [ 1.092997] ... APIC ISR field: [ 1.092997] 0000000000000000000000000000000000000000000000000000000000000000 [ 1.092999] ... APIC TMR field: [ 1.092999] 0000000000000000000000000000000000000000000000000000000000000000 [ 1.092999] ... APIC IRR field: [ 1.092999] 0000000000000000000000000000000000000000000000000000000000008000 [ 1.092999] ... APIC ESR: 00000000 [ 1.092999] ... APIC ICR: 000008fd [ 1.092999] ... APIC ICR2: 01000000 [ 1.092999] ... APIC LVTT: 000200ef [ 1.092999] ... APIC LVTPC: 00010000 [ 1.092999] ... APIC LVT0: 00010700 [ 1.092999] ... APIC LVT1: 00010400 [ 1.092999] ... APIC LVTERR: 000000fe [ 1.092999] ... APIC TMICT: 00002895 [ 1.092999] ... APIC TMCCT: 000023d4 [ 1.092999] ... APIC TDCR: 00000003 [ 1.092999] [ 1.096481] number of MP IRQ sources: 15. [ 1.096569] number of IO-APIC #1 registers: 24. [ 1.096656] testing the IO APIC....................... [ 1.096752] [ 1.096834] IO APIC #1...... [ 1.096917] .... register #00: 02000000 [ 1.097003] ....... : physical APIC id: 02 [ 1.097090] ....... : Delivery Type: 0 [ 1.097177] ....... : LTS : 0 [ 1.097263] .... register #01: 00170020 [ 1.097349] ....... : max redirection entries: 0017 [ 1.097437] ....... : PRQ implemented: 0 [ 1.097524] ....... : IO APIC version: 0020 [ 1.097611] .... IRQ redirection table: [ 1.097696] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 1.097789] 00 000 1 0 0 0 0 0 0 00 [ 1.097926] 01 003 0 0 0 0 0 1 1 31 [ 1.098007] 02 003 0 0 0 0 0 1 1 30 [ 1.098144] 03 003 0 0 0 0 0 1 1 33 [ 1.098281] 04 003 0 0 0 0 0 1 1 34 [ 1.098416] 05 003 0 0 0 0 0 1 1 35 [ 1.098552] 06 003 0 0 0 0 0 1 1 36 [ 1.098688] 07 003 0 0 0 0 0 1 1 37 [ 1.098824] 08 003 0 0 0 0 0 1 1 38 [ 1.099009] 09 003 0 1 0 0 0 1 1 39 [ 1.099146] 0a 003 0 0 0 0 0 1 1 3A [ 1.099283] 0b 003 0 0 0 0 0 1 1 3B [ 1.099419] 0c 003 0 0 0 0 0 1 1 3C [ 1.099556] 0d 003 0 0 0 0 0 1 1 3D [ 1.099693] 0e 003 0 0 0 0 0 1 1 3E [ 1.099828] 0f 003 0 0 0 0 0 1 1 3F [ 1.099965] 10 000 1 0 0 0 0 0 0 00 [ 1.100092] 11 000 1 0 0 0 0 0 0 00 [ 1.100228] 12 000 1 0 0 0 0 0 0 00 [ 1.100364] 13 000 1 0 0 0 0 0 0 00 [ 1.100501] 14 000 1 0 0 0 0 0 0 00 [ 1.100636] 15 000 1 0 0 0 0 0 0 00 [ 1.100773] 16 000 1 0 0 0 0 0 0 00 [ 1.100909] 17 000 1 0 0 0 0 0 0 00 [ 1.101088] IRQ to pin mappings: [ 1.101174] IRQ0 -> 0:2 [ 1.101343] IRQ1 -> 0:1 [ 1.101512] IRQ3 -> 0:3 [ 1.101681] IRQ4 -> 0:4 [ 1.101851] IRQ5 -> 0:5 [ 1.102003] IRQ6 -> 0:6 [ 1.102172] IRQ7 -> 0:7 [ 1.102340] IRQ8 -> 0:8 [ 1.102509] IRQ9 -> 0:9 [ 1.102678] IRQ10 -> 0:10 [ 1.102847] IRQ11 -> 0:11 [ 1.103005] IRQ12 -> 0:12 [ 1.103174] IRQ13 -> 0:13 [ 1.103342] IRQ14 -> 0:14 [ 1.103511] IRQ15 -> 0:15 [ 1.103794] .................................... done. [ 1.103885] initcall print_all_ICs+0x0/0x510 returned 0 after 11718 usecs [ 1.104007] calling clocksource_done_booting+0x0/0x20 @ 1 [ 1.104098] Switching to clocksource jiffies [ 1.104187] initcall clocksource_done_booting+0x0/0x20 returned 0 after 0 usecs [ 1.104316] calling rb_init_debugfs+0x0/0x30 @ 1 [ 1.104485] initcall rb_init_debugfs+0x0/0x30 returned 0 after 0 usecs [ 1.104578] calling tracer_init_debugfs+0x0/0x300 @ 1 [ 1.105718] initcall tracer_init_debugfs+0x0/0x300 returned 0 after 976 usecs [ 1.105812] calling init_trace_printk_function_export+0x0/0x40 @ 1 [ 1.105924] initcall init_trace_printk_function_export+0x0/0x40 returned 0 after 0 usecs [ 1.106006] calling event_trace_init+0x0/0x220 @ 1 [ 1.135539] initcall event_trace_init+0x0/0x220 returned 0 after 28320 usecs [ 1.135638] calling init_pipe_fs+0x0/0x60 @ 1 [ 1.135931] initcall init_pipe_fs+0x0/0x60 returned 0 after 0 usecs [ 1.136007] calling eventpoll_init+0x0/0xa0 @ 1 [ 1.136140] initcall eventpoll_init+0x0/0xa0 returned 0 after 0 usecs [ 1.136233] calling anon_inode_init+0x0/0x110 @ 1 [ 1.136484] initcall anon_inode_init+0x0/0x110 returned 0 after 0 usecs [ 1.136578] calling tomoyo_initerface_init+0x0/0x110 @ 1 [ 1.137158] initcall tomoyo_initerface_init+0x0/0x110 returned 0 after 976 usecs [ 1.137288] calling blk_scsi_ioctl_init+0x0/0x330 @ 1 [ 1.137379] initcall blk_scsi_ioctl_init+0x0/0x330 returned 0 after 0 usecs [ 1.137473] calling acpi_event_init+0x0/0x50 @ 1 [ 1.140065] initcall acpi_event_init+0x0/0x50 returned 0 after 2929 usecs [ 1.140159] calling pnpacpi_init+0x0/0xa0 @ 1 [ 1.140246] pnp: PnP ACPI init [ 1.140431] PM: Adding info for No Bus:pnp0 [ 1.140522] ACPI: bus type pnp registered [ 1.156748] PM: Adding info for pnp:00:00 [ 1.157746] PM: Adding info for pnp:00:01 [ 1.159793] PM: Adding info for pnp:00:02 [ 1.161319] PM: Adding info for pnp:00:03 [ 1.162223] PM: Adding info for pnp:00:04 [ 1.163045] PM: Adding info for pnp:00:05 [ 1.163596] IOAPIC[0]: Set routing entry (1-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 1.164263] PM: Adding info for pnp:00:06 [ 1.164785] IOAPIC[0]: Set routing entry (1-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 1.165285] PM: Adding info for pnp:00:07 [ 1.165819] IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 1.166266] PM: Adding info for pnp:00:08 [ 1.166781] IOAPIC[0]: Set routing entry (1-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 1.167245] PM: Adding info for pnp:00:09 [ 1.177388] IOAPIC[0]: Set routing entry (1-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 1.178171] PM: Adding info for pnp:00:0a [ 1.188025] pnp: PnP ACPI: found 11 devices [ 1.188115] ACPI: ACPI bus type pnp unregistered [ 1.188209] initcall pnpacpi_init+0x0/0xa0 returned 0 after 46875 usecs [ 1.188301] calling pnpbios_init+0x0/0x400 @ 1 [ 1.188391] PnPBIOS: Disabled by ACPI PNP [ 1.188479] initcall pnpbios_init+0x0/0x400 returned -19 after 0 usecs [ 1.188571] calling pnp_system_init+0x0/0x10 @ 1 [ 1.188758] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 1.188873] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 1.188986] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 1.189025] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 1.189140] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 1.189255] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 1.189369] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 1.189483] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 1.189597] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 1.189711] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 1.189826] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 1.190029] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 1.190143] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved [ 1.190300] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved [ 1.190488] system 00:02: ioport range 0x164e-0x164f has been reserved [ 1.190594] system 00:02: ioport range 0x1000-0x107f has been reserved [ 1.190700] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 1.190807] system 00:02: ioport range 0x800-0x80f has been reserved [ 1.190912] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 1.191028] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 1.191136] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved [ 1.191249] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.191357] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 1.191465] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 1.192020] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 1.192419] initcall pnp_system_init+0x0/0x10 returned 0 after 3906 usecs [ 1.192513] calling chr_dev_init+0x0/0xf0 @ 1 [ 1.193443] PM: Adding info for No Bus:mem [ 1.193958] PM: Adding info for No Bus:kmem [ 1.194395] PM: Adding info for No Bus:null [ 1.194878] PM: Adding info for No Bus:port [ 1.195695] PM: Adding info for No Bus:zero [ 1.196191] PM: Adding info for No Bus:full [ 1.196642] PM: Adding info for No Bus:random [ 1.197129] PM: Adding info for No Bus:urandom [ 1.197603] PM: Adding info for No Bus:kmsg [ 1.197964] initcall chr_dev_init+0x0/0xf0 returned 0 after 4882 usecs [ 1.198007] calling firmware_class_init+0x0/0x80 @ 1 [ 1.198396] initcall firmware_class_init+0x0/0x80 returned 0 after 0 usecs [ 1.198492] calling cpufreq_gov_performance_init+0x0/0x10 @ 1 [ 1.198605] initcall cpufreq_gov_performance_init+0x0/0x10 returned 0 after 0 usecs [ 1.198736] calling init_acpi_pm_clocksource+0x0/0x250 @ 1 [ 1.233442] Switching to clocksource acpi_pm [ 1.233626] [ 1.233627] ======================================================= [ 1.233798] [ INFO: possible circular locking dependency detected ] [ 1.233889] 2.6.31-rc6-tip-01322-gd685ec8-dirty #7600 [ 1.233977] ------------------------------------------------------- [ 1.233999] swapper/1 is trying to acquire lock: [ 1.233999] (cpu_add_remove_lock){+.+.+.}, at: [] cpu_maps_update_begin+0xf/0x20 [ 1.233999] [ 1.233999] but task is already holding lock: [ 1.233999] (setup_lock){+.+.+.}, at: [] stop_machine_create+0x12/0xa0 [ 1.233999] [ 1.233999] which lock already depends on the new lock. [ 1.233999] [ 1.233999] [ 1.233999] the existing dependency chain (in reverse order) is: [ 1.233999] [ 1.233999] -> #3 (setup_lock){+.+.+.}: [ 1.233999] [] validate_chain+0xad0/0x1130 [ 1.233999] [] __lock_acquire+0x341/0x690 [ 1.233999] [] lock_acquire+0x8e/0xf0 [ 1.233999] [] __mutex_lock_common+0x49/0x3d0 [ 1.233999] [] mutex_lock_nested+0x29/0x40 [ 1.233999] [] stop_machine_create+0x12/0xa0 [ 1.233999] [] stop_machine+0x1b/0x50 [ 1.233999] [] timekeeping_notify+0x19/0x20 [ 1.233999] [] clocksource_select+0x84/0xb0 [ 1.233999] [] clocksource_register+0x22/0x1e0 [ 1.233999] [] init_acpi_pm_clocksource+0x16c/0x250 [ 1.233999] [] do_one_initcall+0x27/0x190 [ 1.233999] [] kernel_init+0x14a/0x1a0 [ 1.233999] [] kernel_thread_helper+0x7/0x14 [ 1.233999] [ 1.233999] -> #2 (clocksource_mutex){+.+.+.}: [ 1.233999] [] validate_chain+0xad0/0x1130 [ 1.233999] [] __lock_acquire+0x341/0x690 [ 1.233999] [] lock_acquire+0x8e/0xf0 [ 1.233999] [] __mutex_lock_common+0x49/0x3d0 [ 1.233999] [] mutex_lock_nested+0x29/0x40 [ 1.233999] [] clocksource_change_rating+0x1d/0x40 [ 1.233999] [] mark_tsc_unstable+0x4c/0x50 [ 1.233999] [] check_tsc_sync_source+0x10f/0x120 [ 1.233999] [] native_cpu_up+0x423/0x800 [ 1.233999] [] _cpu_up+0x89/0x110 [ 1.233999] [] cpu_up+0x49/0x70 [ 1.233999] [] kernel_init+0xcc/0x1a0 [ 1.233999] [] kernel_thread_helper+0x7/0x14 [ 1.233999] [ 1.233999] -> #1 (cpu_hotplug.lock){+.+.+.}: [ 1.233999] [] validate_chain+0xad0/0x1130 [ 1.233999] [] __lock_acquire+0x341/0x690 [ 1.233999] [] lock_acquire+0x8e/0xf0 [ 1.233999] [] __mutex_lock_common+0x49/0x3d0 [ 1.233999] [] mutex_lock_nested+0x29/0x40 [ 1.233999] [] cpu_hotplug_begin+0x1d/0x50 [ 1.233999] [] _cpu_up+0x5b/0x110 [ 1.233999] [] cpu_up+0x49/0x70 [ 1.233999] [] kernel_init+0xcc/0x1a0 [ 1.233999] [] kernel_thread_helper+0x7/0x14 [ 1.233999] [ 1.233999] -> #0 (cpu_add_remove_lock){+.+.+.}: [ 1.233999] [] validate_chain+0x1115/0x1130 [ 1.233999] [] __lock_acquire+0x341/0x690 [ 1.233999] [] lock_acquire+0x8e/0xf0 [ 1.233999] [] __mutex_lock_common+0x49/0x3d0 [ 1.233999] [] mutex_lock_nested+0x29/0x40 [ 1.233999] [] cpu_maps_update_begin+0xf/0x20 [ 1.233999] [] __create_workqueue_key+0x100/0x1f0 [ 1.233999] [] stop_machine_create+0x42/0xa0 [ 1.233999] [] stop_machine+0x1b/0x50 [ 1.233999] [] timekeeping_notify+0x19/0x20 [ 1.233999] [] clocksource_select+0x84/0xb0 [ 1.233999] [] clocksource_register+0x22/0x1e0 [ 1.233999] [] init_acpi_pm_clocksource+0x16c/0x250 [ 1.233999] [] do_one_initcall+0x27/0x190 [ 1.233999] [] kernel_init+0x14a/0x1a0 [ 1.233999] [] kernel_thread_helper+0x7/0x14 [ 1.233999] [ 1.233999] other info that might help us debug this: [ 1.233999] [ 1.233999] 2 locks held by swapper/1: [ 1.233999] #0: (clocksource_mutex){+.+.+.}, at: [] clocksource_register+0x16/0x1e0 [ 1.233999] #1: (setup_lock){+.+.+.}, at: [] stop_machine_create+0x12/0xa0 [ 1.233999] [ 1.233999] stack backtrace: [ 1.233999] Pid: 1, comm: swapper Not tainted 2.6.31-rc6-tip-01322-gd685ec8-dirty #7600 [ 1.233999] Call Trace: [ 1.233999] [] print_circular_bug+0xbb/0xd0 [ 1.233999] [] validate_chain+0x1115/0x1130 [ 1.233999] [] __lock_acquire+0x341/0x690 [ 1.233999] [] lock_acquire+0x8e/0xf0 [ 1.233999] [] ? cpu_maps_update_begin+0xf/0x20 [ 1.233999] [] __mutex_lock_common+0x49/0x3d0 [ 1.233999] [] ? cpu_maps_update_begin+0xf/0x20 [ 1.233999] [] ? mutex_unlock+0x8/0x10 [ 1.233999] [] ? pcpu_alloc+0x30b/0x400 [ 1.233999] [] ? kmemleak_alloc+0x2b/0x60 [ 1.233999] [] mutex_lock_nested+0x29/0x40 [ 1.233999] [] ? cpu_maps_update_begin+0xf/0x20 [ 1.233999] [] cpu_maps_update_begin+0xf/0x20 [ 1.233999] [] __create_workqueue_key+0x100/0x1f0 [ 1.233999] [] ? mutex_lock_nested+0x29/0x40 [ 1.233999] [] stop_machine_create+0x42/0xa0 [ 1.233999] [] stop_machine+0x1b/0x50 [ 1.233999] [] ? change_clocksource+0x0/0x70 [ 1.233999] [] timekeeping_notify+0x19/0x20 [ 1.233999] [] clocksource_select+0x84/0xb0 [ 1.233999] [] clocksource_register+0x22/0x1e0 [ 1.233999] [] ? __const_udelay+0x2e/0x30 [ 1.233999] [] init_acpi_pm_clocksource+0x16c/0x250 [ 1.233999] [] ? ktime_get+0x5f/0x110 [ 1.233999] [] ? init_acpi_pm_clocksource+0x0/0x250 [ 1.233999] [] do_one_initcall+0x27/0x190 [ 1.233999] [] ? init_acpi_pm_clocksource+0x0/0x250 [ 1.233999] [] kernel_init+0x14a/0x1a0 [ 1.233999] [] ? kernel_init+0x0/0x1a0 [ 1.233999] [] kernel_thread_helper+0x7/0x14 [ 1.234233] initcall init_acpi_pm_clocksource+0x0/0x250 returned 0 after 35202 usecs [ 1.234365] calling ssb_modinit+0x0/0x60 @ 1 [ 1.234455] Switched to high resolution mode on CPU 0 [ 1.234376] Switched to high resolution mode on CPU 1 [ 1.234777] initcall ssb_modinit+0x0/0x60 returned 0 after 293 usecs [ 1.234869] calling pcibios_assign_resources+0x0/0xa0 @ 1 [ 1.235211] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.235312] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 1.235407] pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff [ 1.235502] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.235595] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 1.235687] pci 0000:00:1c.1: IO window: 0x3000-0x4fff [ 1.235781] pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff [ 1.235876] pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff [ 1.236066] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 1.236159] pci 0000:00:1c.2: IO window: 0x5000-0x6fff [ 1.236255] pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff [ 1.236350] pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff [ 1.236486] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c [ 1.236579] pci 0000:00:1c.3: IO window: 0x7000-0x8fff [ 1.236673] pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff [ 1.236767] pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff [ 1.236946] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 [ 1.237054] pci 0000:15:00.0: IO window: 0x009000-0x0090ff [ 1.237149] pci 0000:15:00.0: IO window: 0x009400-0x0094ff [ 1.237244] pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff [ 1.237341] pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff [ 1.237437] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 [ 1.237529] pci 0000:00:1e.0: IO window: 0x9000-0xcfff [ 1.237623] pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff [ 1.237718] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff [ 1.237877] IOAPIC[0]: Set routing entry (1-20 -> 0x49 -> IRQ 20 Mode:1 Active:1) [ 1.238025] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.238901] pci 0000:00:1c.0: setting latency timer to 64 [ 1.239023] IOAPIC[0]: Set routing entry (1-21 -> 0x51 -> IRQ 21 Mode:1 Active:1) [ 1.239154] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.239249] pci 0000:00:1c.1: setting latency timer to 64 [ 1.239358] IOAPIC[0]: Set routing entry (1-22 -> 0x59 -> IRQ 22 Mode:1 Active:1) [ 1.239491] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.239587] pci 0000:00:1c.2: setting latency timer to 64 [ 1.239693] IOAPIC[0]: Set routing entry (1-23 -> 0x61 -> IRQ 23 Mode:1 Active:1) [ 1.239824] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.239920] pci 0000:00:1c.3: setting latency timer to 64 [ 1.240030] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 1.240126] pci 0000:00:1e.0: setting latency timer to 64 [ 1.240235] IOAPIC[0]: Set routing entry (1-16 -> 0x69 -> IRQ 16 Mode:1 Active:1) [ 1.240366] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.240463] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.240553] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.240647] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 1.240737] pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff] [ 1.240828] pci_bus 0000:03: resource 0 io: [0x3000-0x4fff] [ 1.240919] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff] [ 1.241025] pci_bus 0000:03: resource 2 pref mem [0xe4000000-0xe40fffff] [ 1.241117] pci_bus 0000:04: resource 0 io: [0x5000-0x6fff] [ 1.241207] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff] [ 1.241303] pci_bus 0000:04: resource 2 pref mem [0xe4100000-0xe41fffff] [ 1.241395] pci_bus 0000:0c: resource 0 io: [0x7000-0x8fff] [ 1.241485] pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff] [ 1.241576] pci_bus 0000:0c: resource 2 pref mem [0xe4200000-0xe42fffff] [ 1.241669] pci_bus 0000:15: resource 0 io: [0x9000-0xcfff] [ 1.241759] pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff] [ 1.241850] pci_bus 0000:15: resource 2 pref mem [0xe0000000-0xe3ffffff] [ 1.241942] pci_bus 0000:15: resource 3 io: [0x00-0xffff] [ 1.242046] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.242138] pci_bus 0000:16: resource 0 io: [0x9000-0x90ff] [ 1.242228] pci_bus 0000:16: resource 1 io: [0x9400-0x94ff] [ 1.242322] pci_bus 0000:16: resource 2 pref mem [0xe0000000-0xe3ffffff] [ 1.242415] pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff] [ 1.242509] initcall pcibios_assign_resources+0x0/0xa0 returned 0 after 7368 usecs [ 1.242637] calling sysctl_core_init+0x0/0x30 @ 1 [ 1.242791] initcall sysctl_core_init+0x0/0x30 returned 0 after 62 usecs [ 1.242884] calling inet_init+0x0/0x200 @ 1 [ 1.243039] NET: Registered protocol family 2 [ 1.243381] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.244509] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.246277] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) [ 1.248554] TCP: Hash tables configured (established 131072 bind 65536) [ 1.248652] TCP reno registered [ 1.249134] initcall inet_init+0x0/0x200 returned 0 after 6007 usecs [ 1.249231] calling af_unix_init+0x0/0x60 @ 1 [ 1.249338] NET: Registered protocol family 1 [ 1.249473] initcall af_unix_init+0x0/0x60 returned 0 after 145 usecs [ 1.249566] calling default_rootfs+0x0/0x90 @ 1 [ 1.249751] initcall default_rootfs+0x0/0x90 returned 0 after 92 usecs [ 1.249843] calling i8259A_init_sysfs+0x0/0x30 @ 1 [ 1.250503] initcall i8259A_init_sysfs+0x0/0x30 returned 0 after 553 usecs [ 1.250596] calling sbf_init+0x0/0xd0 @ 1 [ 1.250690] Simple Boot Flag at 0x35 set to 0x1 [ 1.250783] initcall sbf_init+0x0/0xd0 returned 0 after 96 usecs [ 1.250874] calling i8237A_init_sysfs+0x0/0x30 @ 1 [ 1.251469] initcall i8237A_init_sysfs+0x0/0x30 returned 0 after 491 usecs [ 1.251563] calling add_rtc_cmos+0x0/0xa0 @ 1 [ 1.251660] initcall add_rtc_cmos+0x0/0xa0 returned 0 after 6 usecs [ 1.251753] calling cache_sysfs_init+0x0/0x60 @ 1 [ 1.254383] initcall cache_sysfs_init+0x0/0x60 returned 0 after 2477 usecs [ 1.254477] calling mce_init_device+0x0/0x100 @ 1 [ 1.255681] PM: Adding info for No Bus:mcelog [ 1.255989] initcall mce_init_device+0x0/0x100 returned 0 after 1385 usecs [ 1.256130] calling threshold_init_device+0x0/0x50 @ 1 [ 1.256224] initcall threshold_init_device+0x0/0x50 returned 0 after 2 usecs [ 1.256325] calling inject_init+0x0/0x20 @ 1 [ 1.256413] Machine check injector initialized [ 1.256504] initcall inject_init+0x0/0x20 returned 0 after 86 usecs [ 1.256596] calling nforce2_init+0x0/0x70 @ 1 [ 1.256707] cpufreq-nforce2: No nForce2 chipset. [ 1.256799] initcall nforce2_init+0x0/0x70 returned -19 after 109 usecs [ 1.256891] calling msr_init+0x0/0x100 @ 1 [ 1.257359] PM: Adding info for No Bus:msr0 [ 1.257775] PM: Adding info for No Bus:msr1 [ 1.258112] initcall msr_init+0x0/0x100 returned 0 after 1102 usecs [ 1.258204] calling apm_init+0x0/0x430 @ 1 [ 1.258312] apm: BIOS not found. [ 1.258401] initcall apm_init+0x0/0x430 returned -19 after 98 usecs [ 1.258493] calling ioapic_init_sysfs+0x0/0xb0 @ 1 [ 1.259075] initcall ioapic_init_sysfs+0x0/0xb0 returned 0 after 477 usecs [ 1.259169] calling add_pcspkr+0x0/0x30 @ 1 [ 1.259382] PM: Adding info for platform:pcspkr [ 1.259687] initcall add_pcspkr+0x0/0x30 returned 0 after 415 usecs [ 1.259778] calling scx200_init+0x0/0x30 @ 1 [ 1.259867] scx200: NatSemi SCx200 Driver [ 1.260261] initcall scx200_init+0x0/0x30 returned 0 after 381 usecs [ 1.260355] calling microcode_init+0x0/0x130 @ 1 [ 1.260552] PM: Adding info for platform:microcode [ 1.260892] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39 [ 1.261088] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39 [ 1.261283] PM: Adding info for No Bus:microcode [ 1.261597] Microcode Update Driver: v2.00 , Peter Oruba [ 1.261730] initcall microcode_init+0x0/0x130 returned 0 after 1254 usecs [ 1.261825] calling start_periodic_check_for_corruption+0x0/0x40 @ 1 [ 1.261916] Scanning for low memory corruption every 60 seconds [ 1.262058] initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 135 usecs [ 1.262192] calling pt_dump_init+0x0/0x70 @ 1 [ 1.262312] initcall pt_dump_init+0x0/0x70 returned 0 after 21 usecs [ 1.262405] calling proc_schedstat_init+0x0/0x30 @ 1 [ 1.262516] initcall proc_schedstat_init+0x0/0x30 returned 0 after 18 usecs [ 1.262610] calling proc_execdomains_init+0x0/0x30 @ 1 [ 1.262716] initcall proc_execdomains_init+0x0/0x30 returned 0 after 14 usecs [ 1.262810] calling ioresources_init+0x0/0x40 @ 1 [ 1.262928] initcall ioresources_init+0x0/0x40 returned 0 after 26 usecs [ 1.263040] calling uid_cache_init+0x0/0x80 @ 1 [ 1.263142] initcall uid_cache_init+0x0/0x80 returned 0 after 11 usecs [ 1.263234] calling init_posix_timers+0x0/0x170 @ 1 [ 1.263337] initcall init_posix_timers+0x0/0x170 returned 0 after 9 usecs [ 1.263430] calling init_posix_cpu_timers+0x0/0xc0 @ 1 [ 1.263524] initcall init_posix_cpu_timers+0x0/0xc0 returned 0 after 1 usecs [ 1.263617] calling nsproxy_cache_init+0x0/0x30 @ 1 [ 1.263716] initcall nsproxy_cache_init+0x0/0x30 returned 0 after 7 usecs [ 1.263811] calling create_proc_profile+0x0/0x250 @ 1 [ 1.263932] initcall create_proc_profile+0x0/0x250 returned 0 after 28 usecs [ 1.264042] calling timekeeping_init_device+0x0/0x30 @ 1 [ 1.264598] initcall timekeeping_init_device+0x0/0x30 returned 0 after 453 usecs [ 1.264728] calling init_clocksource_sysfs+0x0/0x50 @ 1 [ 1.265356] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 521 usecs [ 1.265487] calling init_timer_list_procfs+0x0/0x30 @ 1 [ 1.265595] initcall init_timer_list_procfs+0x0/0x30 returned 0 after 16 usecs [ 1.265725] calling init_tstats_procfs+0x0/0x30 @ 1 [ 1.265832] initcall init_tstats_procfs+0x0/0x30 returned 0 after 14 usecs [ 1.265925] calling lockdep_proc_init+0x0/0x90 @ 1 [ 1.266099] initcall lockdep_proc_init+0x0/0x90 returned 0 after 51 usecs [ 1.266192] calling futex_init+0x0/0xd0 @ 1 [ 1.266302] initcall futex_init+0x0/0xd0 returned 0 after 13 usecs [ 1.266395] calling init_rttest+0x0/0x130 @ 1 [ 1.269474] Initializing RT-Tester: OK [ 1.269565] initcall init_rttest+0x0/0x130 returned 0 after 3006 usecs [ 1.269657] calling proc_dma_init+0x0/0x30 @ 1 [ 1.269764] initcall proc_dma_init+0x0/0x30 returned 0 after 16 usecs [ 1.269856] calling proc_modules_init+0x0/0x30 @ 1 [ 1.269961] initcall proc_modules_init+0x0/0x30 returned 0 after 14 usecs [ 1.270104] calling kallsyms_init+0x0/0x30 @ 1 [ 1.270211] initcall kallsyms_init+0x0/0x30 returned 0 after 15 usecs [ 1.270310] calling crash_save_vmcoreinfo_init+0x0/0x4d0 @ 1 [ 1.270431] initcall crash_save_vmcoreinfo_init+0x0/0x4d0 returned 0 after 27 usecs [ 1.270560] calling crash_notes_memory_init+0x0/0x40 @ 1 [ 1.270658] initcall crash_notes_memory_init+0x0/0x40 returned 0 after 5 usecs [ 1.270788] calling pid_namespaces_init+0x0/0x30 @ 1 [ 1.270888] initcall pid_namespaces_init+0x0/0x30 returned 0 after 8 usecs [ 1.270981] calling audit_init+0x0/0x160 @ 1 [ 1.271167] audit: initializing netlink socket (disabled) [ 1.271300] type=2000 audit(1250886084.271:1): initialized [ 1.271399] initcall audit_init+0x0/0x160 returned 0 after 225 usecs [ 1.271491] calling init_kprobes+0x0/0x190 @ 1 [ 1.282666] initcall init_kprobes+0x0/0x190 returned 0 after 10824 usecs [ 1.282759] calling hung_task_init+0x0/0x50 @ 1 [ 1.282936] initcall hung_task_init+0x0/0x50 returned 0 after 82 usecs [ 1.283087] calling utsname_sysctl_init+0x0/0x20 @ 1 [ 1.283229] initcall utsname_sysctl_init+0x0/0x20 returned 0 after 48 usecs [ 1.283326] calling init_markers+0x0/0x10 @ 1 [ 1.283417] initcall init_markers+0x0/0x10 returned 0 after 1 usecs [ 1.283509] calling init_tracepoints+0x0/0x10 @ 1 [ 1.283602] initcall init_tracepoints+0x0/0x10 returned 0 after 1 usecs [ 1.283694] calling init_events+0x0/0x70 @ 1 [ 1.283788] initcall init_events+0x0/0x70 returned 0 after 4 usecs [ 1.283880] calling init_sched_switch_trace+0x0/0x10 @ 1 [ 1.283976] initcall init_sched_switch_trace+0x0/0x10 returned 0 after 3 usecs [ 1.284121] calling perf_counter_sysfs_init+0x0/0x20 @ 1 [ 1.284245] initcall perf_counter_sysfs_init+0x0/0x20 returned 0 after 30 usecs [ 1.284376] calling init_per_zone_wmark_min+0x0/0x80 @ 1 [ 1.285425] initcall init_per_zone_wmark_min+0x0/0x80 returned 0 after 169 usecs [ 1.285554] calling pdflush_init+0x0/0x20 @ 1 [ 1.285792] initcall pdflush_init+0x0/0x20 returned 0 after 143 usecs [ 1.285884] calling kswapd_init+0x0/0x60 @ 1 [ 1.286121] initcall kswapd_init+0x0/0x60 returned 0 after 141 usecs [ 1.286213] calling init_tmpfs+0x0/0xd0 @ 1 [ 1.286404] initcall init_tmpfs+0x0/0xd0 returned 0 after 91 usecs [ 1.286496] calling setup_vmstat+0x0/0xd0 @ 1 [ 1.286644] initcall setup_vmstat+0x0/0xd0 returned 0 after 57 usecs [ 1.286736] calling mm_sysfs_init+0x0/0x30 @ 1 [ 1.286853] initcall mm_sysfs_init+0x0/0x30 returned 0 after 25 usecs [ 1.286945] calling proc_vmalloc_init+0x0/0x30 @ 1 [ 1.287069] initcall proc_vmalloc_init+0x0/0x30 returned 0 after 15 usecs [ 1.287162] calling init_emergency_pool+0x0/0x70 @ 1 [ 1.287367] highmem bounce pool size: 64 pages [ 1.287458] initcall init_emergency_pool+0x0/0x70 returned 0 after 200 usecs [ 1.287551] calling procswaps_init+0x0/0x30 @ 1 [ 1.287657] initcall procswaps_init+0x0/0x30 returned 0 after 15 usecs [ 1.287750] calling hugetlb_init+0x0/0x420 @ 1 [ 1.287842] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.288049] initcall hugetlb_init+0x0/0x420 returned 0 after 201 usecs [ 1.288141] calling slab_proc_init+0x0/0x30 @ 1 [ 1.288247] initcall slab_proc_init+0x0/0x30 returned 0 after 15 usecs [ 1.288340] calling slab_sysfs_init+0x0/0xf0 @ 1 [ 1.322235] initcall slab_sysfs_init+0x0/0xf0 returned 0 after 33008 usecs [ 1.322334] calling kmemleak_test_init+0x0/0x5b0 @ 1 [ 1.322423] Kmemleak testing [ 1.322513] kmemleak: kmalloc(32) = f3d241c0 [ 1.322603] kmemleak: kmalloc(32) = f3d241e0 [ 1.322693] kmemleak: kmalloc(1024) = f4391000 [ 1.322784] kmemleak: kmalloc(1024) = f4391400 [ 1.322876] kmemleak: kmalloc(2048) = f4853000 [ 1.322967] kmemleak: kmalloc(2048) = f4853800 [ 1.323076] kmemleak: kmalloc(4096) = f502c000 [ 1.323167] kmemleak: kmalloc(4096) = f502d000 [ 1.323284] kmemleak: vmalloc(64) = f9540000 [ 1.323394] kmemleak: vmalloc(64) = f9543000 [ 1.323507] kmemleak: vmalloc(64) = f9546000 [ 1.323615] kmemleak: vmalloc(64) = f9549000 [ 1.323723] kmemleak: vmalloc(64) = f954c000 [ 1.323814] kmemleak: kmalloc(sizeof(*elem)) = f48a9400 [ 1.323906] kmemleak: kmalloc(sizeof(*elem)) = f48a9200 [ 1.323998] kmemleak: kmalloc(sizeof(*elem)) = f48a9300 [ 1.324106] kmemleak: kmalloc(sizeof(*elem)) = f48a9100 [ 1.324197] kmemleak: kmalloc(sizeof(*elem)) = f48a9800 [ 1.324295] kmemleak: kmalloc(sizeof(*elem)) = f48a9500 [ 1.324386] kmemleak: kmalloc(sizeof(*elem)) = f48a9900 [ 1.324479] kmemleak: kmalloc(sizeof(*elem)) = f48a9a00 [ 1.324570] kmemleak: kmalloc(sizeof(*elem)) = f48a9b00 [ 1.324662] kmemleak: kmalloc(sizeof(*elem)) = f48a9c00 [ 1.324758] kmemleak: kmalloc(129) = f489de40 [ 1.324850] kmemleak: kmalloc(129) = f489df00 [ 1.324941] initcall kmemleak_test_init+0x0/0x5b0 returned 0 after 2457 usecs [ 1.325050] calling fasync_init+0x0/0x30 @ 1 [ 1.325163] initcall fasync_init+0x0/0x30 returned 0 after 22 usecs [ 1.325256] calling proc_filesystems_init+0x0/0x30 @ 1 [ 1.325371] initcall proc_filesystems_init+0x0/0x30 returned 0 after 22 usecs [ 1.325465] calling dnotify_init+0x0/0x80 @ 1 [ 1.325599] initcall dnotify_init+0x0/0x80 returned 0 after 43 usecs [ 1.325691] calling inotify_setup+0x0/0x10 @ 1 [ 1.325782] initcall inotify_setup+0x0/0x10 returned 0 after 1 usecs [ 1.325874] calling aio_setup+0x0/0x90 @ 1 [ 1.326174] initcall aio_setup+0x0/0x90 returned 0 after 204 usecs [ 1.326269] calling proc_locks_init+0x0/0x30 @ 1 [ 1.326375] initcall proc_locks_init+0x0/0x30 returned 0 after 16 usecs [ 1.326467] calling init_mbcache+0x0/0x20 @ 1 [ 1.326559] initcall init_mbcache+0x0/0x20 returned 0 after 2 usecs [ 1.326651] calling proc_cmdline_init+0x0/0x30 @ 1 [ 1.326757] initcall proc_cmdline_init+0x0/0x30 returned 0 after 14 usecs [ 1.326850] calling proc_cpuinfo_init+0x0/0x30 @ 1 [ 1.326956] initcall proc_cpuinfo_init+0x0/0x30 returned 0 after 14 usecs [ 1.327092] calling proc_devices_init+0x0/0x30 @ 1 [ 1.327199] initcall proc_devices_init+0x0/0x30 returned 0 after 15 usecs [ 1.327300] calling proc_interrupts_init+0x0/0x30 @ 1 [ 1.327409] initcall proc_interrupts_init+0x0/0x30 returned 0 after 15 usecs [ 1.327503] calling proc_loadavg_init+0x0/0x30 @ 1 [ 1.327609] initcall proc_loadavg_init+0x0/0x30 returned 0 after 15 usecs [ 1.327701] calling proc_meminfo_init+0x0/0x30 @ 1 [ 1.327806] initcall proc_meminfo_init+0x0/0x30 returned 0 after 14 usecs [ 1.327898] calling proc_stat_init+0x0/0x30 @ 1 [ 1.328019] initcall proc_stat_init+0x0/0x30 returned 0 after 28 usecs [ 1.328111] calling proc_uptime_init+0x0/0x30 @ 1 [ 1.328216] initcall proc_uptime_init+0x0/0x30 returned 0 after 14 usecs [ 1.328314] calling proc_version_init+0x0/0x30 @ 1 [ 1.328420] initcall proc_version_init+0x0/0x30 returned 0 after 15 usecs [ 1.328512] calling proc_softirqs_init+0x0/0x30 @ 1 [ 1.328618] initcall proc_softirqs_init+0x0/0x30 returned 0 after 15 usecs [ 1.328710] calling proc_kcore_init+0x0/0x50 @ 1 [ 1.328814] initcall proc_kcore_init+0x0/0x50 returned 0 after 14 usecs [ 1.328906] calling proc_kmsg_init+0x0/0x30 @ 1 [ 1.329027] initcall proc_kmsg_init+0x0/0x30 returned 0 after 27 usecs [ 1.329120] calling proc_page_init+0x0/0x50 @ 1 [ 1.329240] initcall proc_page_init+0x0/0x50 returned 0 after 28 usecs [ 1.329334] calling init_devpts_fs+0x0/0x60 @ 1 [ 1.329499] initcall init_devpts_fs+0x0/0x60 returned 0 after 73 usecs [ 1.329592] calling init_reiserfs_fs+0x0/0x80 @ 1 [ 1.330324] initcall init_reiserfs_fs+0x0/0x80 returned 0 after 624 usecs [ 1.330418] calling init_ext3_fs+0x0/0x80 @ 1 [ 1.331743] initcall init_ext3_fs+0x0/0x80 returned 0 after 1205 usecs [ 1.331837] calling journal_init+0x0/0xe0 @ 1 [ 1.333827] initcall journal_init+0x0/0xe0 returned 0 after 1854 usecs [ 1.333921] calling init_ramfs_fs+0x0/0x10 @ 1 [ 1.334079] initcall init_ramfs_fs+0x0/0x10 returned 0 after 3 usecs [ 1.334172] calling init_hugetlbfs_fs+0x0/0xb0 @ 1 [ 1.334932] initcall init_hugetlbfs_fs+0x0/0xb0 returned 0 after 653 usecs [ 1.335057] calling init_nls_cp850+0x0/0x10 @ 1 [ 1.335151] initcall init_nls_cp850+0x0/0x10 returned 0 after 3 usecs [ 1.335243] calling init_nls_cp855+0x0/0x10 @ 1 [ 1.335337] initcall init_nls_cp855+0x0/0x10 returned 0 after 1 usecs [ 1.335429] calling init_nls_cp861+0x0/0x10 @ 1 [ 1.335521] initcall init_nls_cp861+0x0/0x10 returned 0 after 1 usecs [ 1.335613] calling init_nls_cp862+0x0/0x10 @ 1 [ 1.335705] initcall init_nls_cp862+0x0/0x10 returned 0 after 1 usecs [ 1.335797] calling init_nls_cp866+0x0/0x10 @ 1 [ 1.335889] initcall init_nls_cp866+0x0/0x10 returned 0 after 1 usecs [ 1.335982] calling init_nls_cp874+0x0/0x10 @ 1 [ 1.336095] initcall init_nls_cp874+0x0/0x10 returned 0 after 1 usecs [ 1.336188] calling init_nls_cp949+0x0/0x10 @ 1 [ 1.336286] initcall init_nls_cp949+0x0/0x10 returned 0 after 1 usecs [ 1.336378] calling init_nls_iso8859_2+0x0/0x10 @ 1 [ 1.336471] initcall init_nls_iso8859_2+0x0/0x10 returned 0 after 1 usecs [ 1.336563] calling init_nls_iso8859_3+0x0/0x10 @ 1 [ 1.336657] initcall init_nls_iso8859_3+0x0/0x10 returned 0 after 1 usecs [ 1.336750] calling init_nls_iso8859_7+0x0/0x10 @ 1 [ 1.336842] initcall init_nls_iso8859_7+0x0/0x10 returned 0 after 1 usecs [ 1.336934] calling init_nls_iso8859_14+0x0/0x10 @ 1 [ 1.337041] initcall init_nls_iso8859_14+0x0/0x10 returned 0 after 1 usecs [ 1.337133] calling init_nls_koi8_r+0x0/0x10 @ 1 [ 1.337225] initcall init_nls_koi8_r+0x0/0x10 returned 0 after 1 usecs [ 1.337323] calling init_nls_koi8_u+0x0/0x10 @ 1 [ 1.337416] initcall init_nls_koi8_u+0x0/0x10 returned 0 after 1 usecs [ 1.337508] calling init_nls_koi8_ru+0x0/0x40 @ 1 [ 1.337600] initcall init_nls_koi8_ru+0x0/0x40 returned 0 after 2 usecs [ 1.337693] calling init_affs_fs+0x0/0x60 @ 1 [ 1.338383] initcall init_affs_fs+0x0/0x60 returned 0 after 584 usecs [ 1.338476] calling init_romfs_fs+0x0/0x80 @ 1 [ 1.338565] ROMFS MTD (C) 2007 Red Hat, Inc. [ 1.339261] initcall init_romfs_fs+0x0/0x80 returned 0 after 676 usecs [ 1.339354] calling init_qnx4_fs+0x0/0x70 @ 1 [ 1.340030] QNX4 filesystem 0.2.3 registered. [ 1.340121] initcall init_qnx4_fs+0x0/0x70 returned 0 after 660 usecs [ 1.340213] calling init_autofs_fs+0x0/0x10 @ 1 [ 1.340313] initcall init_autofs_fs+0x0/0x10 returned 0 after 3 usecs [ 1.340405] calling init_adfs_fs+0x0/0x60 @ 1 [ 1.341084] initcall init_adfs_fs+0x0/0x60 returned 0 after 572 usecs [ 1.341177] calling init_nilfs_fs+0x0/0x90 @ 1 [ 1.343697] initcall init_nilfs_fs+0x0/0x90 returned 0 after 2370 usecs [ 1.343791] calling init_befs_fs+0x0/0x90 @ 1 [ 1.343878] BeFS version: 0.9.3 [ 1.344605] initcall init_befs_fs+0x0/0x90 returned 0 after 707 usecs [ 1.344699] calling ipc_init+0x0/0x20 @ 1 [ 1.344809] msgmni has been set to 1665 [ 1.344937] initcall ipc_init+0x0/0x20 returned 0 after 146 usecs [ 1.345072] calling ipc_sysctl_init+0x0/0x20 @ 1 [ 1.345238] initcall ipc_sysctl_init+0x0/0x20 returned 0 after 73 usecs [ 1.345331] calling init_mqueue_fs+0x0/0xc0 @ 1 [ 1.346145] initcall init_mqueue_fs+0x0/0xc0 returned 0 after 705 usecs [ 1.346238] calling key_proc_init+0x0/0x60 @ 1 [ 1.346361] initcall key_proc_init+0x0/0x60 returned 0 after 30 usecs [ 1.346453] calling crypto_wq_init+0x0/0x40 @ 1 [ 1.346703] initcall crypto_wq_init+0x0/0x40 returned 0 after 154 usecs [ 1.346797] calling crypto_algapi_init+0x0/0x10 @ 1 [ 1.346905] initcall crypto_algapi_init+0x0/0x10 returned 0 after 16 usecs [ 1.346999] calling chainiv_module_init+0x0/0x10 @ 1 [ 1.347132] initcall chainiv_module_init+0x0/0x10 returned 0 after 3 usecs [ 1.347225] calling eseqiv_module_init+0x0/0x10 @ 1 [ 1.347324] initcall eseqiv_module_init+0x0/0x10 returned 0 after 2 usecs [ 1.347418] calling seqiv_module_init+0x0/0x10 @ 1 [ 1.347511] initcall seqiv_module_init+0x0/0x10 returned 0 after 2 usecs [ 1.347603] calling hmac_module_init+0x0/0x10 @ 1 [ 1.347695] initcall hmac_module_init+0x0/0x10 returned 0 after 2 usecs [ 1.347788] calling md5_mod_init+0x0/0x10 @ 1 [ 1.348063] initcall md5_mod_init+0x0/0x10 returned 0 after 178 usecs [ 1.348158] calling rmd128_mod_init+0x0/0x10 @ 1 [ 1.348423] initcall rmd128_mod_init+0x0/0x10 returned 0 after 169 usecs [ 1.348516] calling rmd320_mod_init+0x0/0x10 @ 1 [ 1.348787] cryptomgr_test used greatest stack depth: 1908 bytes left [ 1.348792] initcall rmd320_mod_init+0x0/0x10 returned 0 after 177 usecs [ 1.348797] calling sha1_generic_mod_init+0x0/0x10 @ 1 [ 1.348975] initcall sha1_generic_mod_init+0x0/0x10 returned 0 after 167 usecs [ 1.348979] calling tgr192_mod_init+0x0/0x70 @ 1 [ 1.349543] initcall tgr192_mod_init+0x0/0x70 returned 0 after 544 usecs [ 1.349548] calling crypto_ecb_module_init+0x0/0x10 @ 1 [ 1.349558] initcall crypto_ecb_module_init+0x0/0x10 returned 0 after 4 usecs [ 1.349561] calling crypto_cbc_module_init+0x0/0x10 @ 1 [ 1.349569] initcall crypto_cbc_module_init+0x0/0x10 returned 0 after 2 usecs [ 1.349573] calling crypto_pcbc_module_init+0x0/0x10 @ 1 [ 1.349581] initcall crypto_pcbc_module_init+0x0/0x10 returned 0 after 2 usecs [ 1.349585] calling crypto_module_init+0x0/0x10 @ 1 [ 1.349593] initcall crypto_module_init+0x0/0x10 returned 0 after 2 usecs [ 1.349596] calling crypto_ctr_module_init+0x0/0x40 @ 1 [ 1.349606] initcall crypto_ctr_module_init+0x0/0x40 returned 0 after 3 usecs [ 1.349609] calling crypto_gcm_module_init+0x0/0x60 @ 1 [ 1.349619] initcall crypto_gcm_module_init+0x0/0x60 returned 0 after 3 usecs [ 1.349622] calling cryptd_init+0x0/0xd0 @ 1 [ 1.349633] initcall cryptd_init+0x0/0xd0 returned 0 after 5 usecs [ 1.349637] calling des_generic_mod_init+0x0/0x40 @ 1 [ 1.350068] initcall des_generic_mod_init+0x0/0x40 returned 0 after 412 usecs [ 1.350072] calling aes_init+0x0/0x10 @ 1 [ 1.350291] initcall aes_init+0x0/0x10 returned 0 after 207 usecs [ 1.350295] calling khazad_mod_init+0x0/0x10 @ 1 [ 1.350546] initcall khazad_mod_init+0x0/0x10 returned 0 after 239 usecs [ 1.350550] calling anubis_mod_init+0x0/0x10 @ 1 [ 1.350813] initcall anubis_mod_init+0x0/0x10 returned 0 after 250 usecs [ 1.350817] calling salsa20_generic_mod_init+0x0/0x10 @ 1 [ 1.350926] initcall salsa20_generic_mod_init+0x0/0x10 returned 0 after 100 usecs [ 1.350930] calling deflate_mod_init+0x0/0x10 @ 1 [ 1.352589] initcall deflate_mod_init+0x0/0x10 returned 0 after 1612 usecs [ 1.352686] calling michael_mic_init+0x0/0x10 @ 1 [ 1.352985] initcall michael_mic_init+0x0/0x10 returned 0 after 203 usecs [ 1.353098] calling crc32c_mod_init+0x0/0x10 @ 1 [ 1.353436] initcall crc32c_mod_init+0x0/0x10 returned 0 after 240 usecs [ 1.353529] calling crypto_authenc_module_init+0x0/0x10 @ 1 [ 1.353625] initcall crypto_authenc_module_init+0x0/0x10 returned 0 after 3 usecs [ 1.353756] calling krng_mod_init+0x0/0x10 @ 1 [ 1.353943] alg: No test for stdrng (krng) [ 1.354054] initcall krng_mod_init+0x0/0x10 returned 0 after 199 usecs [ 1.354148] calling proc_genhd_init+0x0/0x40 @ 1 [ 1.354275] initcall proc_genhd_init+0x0/0x40 returned 0 after 34 usecs [ 1.354369] calling noop_init+0x0/0x20 @ 1 [ 1.354459] io scheduler noop registered (default) [ 1.354550] initcall noop_init+0x0/0x20 returned 0 after 88 usecs [ 1.354642] calling libcrc32c_mod_init+0x0/0x30 @ 1 [ 1.354741] initcall libcrc32c_mod_init+0x0/0x30 returned 0 after 7 usecs [ 1.354834] calling percpu_counter_startup+0x0/0x20 @ 1 [ 1.354929] initcall percpu_counter_startup+0x0/0x20 returned 0 after 3 usecs [ 1.355088] calling audit_classes_init+0x0/0x50 @ 1 [ 1.355209] initcall audit_classes_init+0x0/0x50 returned 0 after 27 usecs [ 1.355310] calling pci_init+0x0/0x30 @ 1 [ 1.355414] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.355508] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.355601] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.355694] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xc0 [ 1.355793] pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.355886] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.355978] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.356087] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xc0 [ 1.356180] pci 0000:00:02.0: Boot video device [ 1.356280] pci 0000:00:02.1: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.356372] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.356464] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x640 [ 1.356557] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xc0 [ 1.356657] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.356749] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.356842] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.356934] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xc0 [ 1.357047] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.357139] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.357231] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.357327] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xc0 [ 1.357427] pci 0000:00:1c.1: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.357519] pci 0000:00:1c.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.357611] pci 0000:00:1c.1: calling quirk_usb_early_handoff+0x0/0x640 [ 1.357703] pci 0000:00:1c.1: calling pci_fixup_video+0x0/0xc0 [ 1.357802] pci 0000:00:1c.2: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.357893] pci 0000:00:1c.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.357986] pci 0000:00:1c.2: calling quirk_usb_early_handoff+0x0/0x640 [ 1.358094] pci 0000:00:1c.2: calling pci_fixup_video+0x0/0xc0 [ 1.358195] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.358294] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.358386] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x640 [ 1.358479] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xc0 [ 1.358578] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.358670] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.358762] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.358859] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 1.358950] pci 0000:00:1d.0: Performing full reset [ 1.359066] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xc0 [ 1.359166] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.359262] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.359355] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x640 [ 1.359449] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 1.359541] pci 0000:00:1d.1: Performing full reset [ 1.359642] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xc0 [ 1.359741] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.359833] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.359926] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x640 [ 1.360035] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 1.360127] pci 0000:00:1d.2: Performing full reset [ 1.360229] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xc0 [ 1.360332] pci 0000:00:1d.3: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.360424] pci 0000:00:1d.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.360516] pci 0000:00:1d.3: calling quirk_usb_early_handoff+0x0/0x640 [ 1.360611] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000 [ 1.360703] pci 0000:00:1d.3: Performing full reset [ 1.360804] pci 0000:00:1d.3: calling pci_fixup_video+0x0/0xc0 [ 1.360903] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.360996] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30 [ 1.361104] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x640 [ 1.361241] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xc0 [ 1.361341] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.361434] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.361527] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.361619] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xc0 [ 1.361718] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.361810] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.361902] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.361993] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xc0 [ 1.362108] pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.362201] pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.362300] pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x640 [ 1.362392] pci 0000:00:1f.1: calling pci_fixup_video+0x0/0xc0 [ 1.362492] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.362583] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.362676] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x640 [ 1.362767] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xc0 [ 1.362867] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.362958] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.363065] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x640 [ 1.363157] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xc0 [ 1.363256] pci 0000:02:00.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.363349] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.363442] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.363534] pci 0000:02:00.0: calling pci_fixup_video+0x0/0xc0 [ 1.363633] pci 0000:03:00.0: calling quirk_e100_interrupt+0x0/0x1e0 [ 1.363725] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.363817] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.363910] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xc0 [ 1.364024] pci 0000:15:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.364119] pci 0000:15:00.0: calling quirk_usb_early_handoff+0x0/0x640 [ 1.364211] pci 0000:15:00.0: calling pci_fixup_video+0x0/0xc0 [ 1.364318] initcall pci_init+0x0/0x30 returned 0 after 8708 usecs [ 1.364409] calling pci_proc_init+0x0/0x70 @ 1 [ 1.365060] initcall pci_proc_init+0x0/0x70 returned 0 after 545 usecs [ 1.365153] calling pcie_portdrv_init+0x0/0x60 @ 1 [ 1.365827] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 1.365929] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.366259] PM: Adding info for pci_express:0000:00:1c.0:pcie01 [ 1.366688] PM: Adding info for pci_express:0000:00:1c.0:pcie04 [ 1.367302] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 1.367404] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.367612] PM: Adding info for pci_express:0000:00:1c.1:pcie01 [ 1.368107] PM: Adding info for pci_express:0000:00:1c.1:pcie04 [ 1.368768] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 1.368869] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.369122] PM: Adding info for pci_express:0000:00:1c.2:pcie01 [ 1.369559] PM: Adding info for pci_express:0000:00:1c.2:pcie04 [ 1.370174] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 1.370278] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.370494] PM: Adding info for pci_express:0000:00:1c.3:pcie01 [ 1.370914] PM: Adding info for pci_express:0000:00:1c.3:pcie04 [ 1.371604] initcall pcie_portdrv_init+0x0/0x60 returned 0 after 6208 usecs [ 1.371698] calling aer_service_init+0x0/0x30 @ 1 [ 1.372061] initcall aer_service_init+0x0/0x30 returned 0 after 262 usecs [ 1.372155] calling pci_stub_init+0x0/0x20 @ 1 [ 1.372537] initcall pci_stub_init+0x0/0x20 returned 0 after 283 usecs [ 1.372629] calling display_class_init+0x0/0x70 @ 1 [ 1.372958] initcall display_class_init+0x0/0x70 returned 0 after 231 usecs [ 1.373083] calling acpi_reserve_resources+0x0/0xd0 @ 1 [ 1.373202] initcall acpi_reserve_resources+0x0/0xd0 returned 0 after 27 usecs [ 1.373340] calling irqrouter_init_sysfs+0x0/0x40 @ 1 [ 1.373892] initcall irqrouter_init_sysfs+0x0/0x40 returned 0 after 449 usecs [ 1.373986] calling acpi_ac_init+0x0/0x30 @ 1 [ 1.374929] ACPI: AC Adapter [AC] (on-line) [ 1.376150] initcall acpi_ac_init+0x0/0x30 returned 0 after 1988 usecs [ 1.376243] calling acpi_pci_slot_init+0x0/0x20 @ 1 [ 1.378347] pci_bus 0000:15: dev 00, created physical slot 1 [ 1.378907] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 2510 usecs [ 1.379018] calling acpi_smb_hc_init+0x0/0x20 @ 1 [ 1.379404] initcall acpi_smb_hc_init+0x0/0x20 returned 0 after 288 usecs [ 1.379497] calling acpi_sbs_init+0x0/0x30 @ 1 [ 1.379868] initcall acpi_sbs_init+0x0/0x30 returned 0 after 273 usecs [ 1.379960] calling pnpbios_thread_init+0x0/0x60 @ 1 [ 1.380093] initcall pnpbios_thread_init+0x0/0x60 returned 0 after 1 usecs [ 1.380186] calling isapnp_init+0x0/0xed0 @ 1 [ 1.380360] PM: Adding info for No Bus:pnp1 [ 1.380448] isapnp: Scanning for PnP cards... [ 1.738267] isapnp: No Plug & Play device found [ 1.738360] initcall isapnp_init+0x0/0xed0 returned 0 after 349684 usecs [ 1.738453] calling regulator_userspace_consumer_init+0x0/0x10 @ 1 [ 1.738822] initcall regulator_userspace_consumer_init+0x0/0x10 returned 0 after 268 usecs [ 1.738954] calling bq24022_init+0x0/0x20 @ 1 [ 1.739540] initcall bq24022_init+0x0/0x20 returned -19 after 474 usecs [ 1.739635] calling rand_initialize+0x0/0x30 @ 1 [ 1.739755] initcall rand_initialize+0x0/0x30 returned 0 after 28 usecs [ 1.739847] calling tty_init+0x0/0x110 @ 1 [ 1.740049] PM: Adding info for No Bus:tty [ 1.740465] PM: Adding info for No Bus:console [ 1.740863] PM: Adding info for No Bus:tty0 [ 1.741536] PM: Adding info for No Bus:vcs [ 1.742061] PM: Adding info for No Bus:vcsa [ 1.742512] PM: Adding info for No Bus:vcs1 [ 1.742929] PM: Adding info for No Bus:vcsa1 [ 1.743399] PM: Adding info for No Bus:tty1 [ 1.743823] PM: Adding info for No Bus:tty2 [ 1.744298] PM: Adding info for No Bus:tty3 [ 1.744736] PM: Adding info for No Bus:tty4 [ 1.745248] PM: Adding info for No Bus:tty5 [ 1.745686] PM: Adding info for No Bus:tty6 [ 1.746125] PM: Adding info for No Bus:tty7 [ 1.746561] PM: Adding info for No Bus:tty8 [ 1.746984] PM: Adding info for No Bus:tty9 [ 1.747412] PM: Adding info for No Bus:tty10 [ 1.747830] PM: Adding info for No Bus:tty11 [ 1.748397] PM: Adding info for No Bus:tty12 [ 1.748812] PM: Adding info for No Bus:tty13 [ 1.749229] PM: Adding info for No Bus:tty14 [ 1.749671] PM: Adding info for No Bus:tty15 [ 1.750104] PM: Adding info for No Bus:tty16 [ 1.750570] PM: Adding info for No Bus:tty17 [ 1.750989] PM: Adding info for No Bus:tty18 [ 1.751417] PM: Adding info for No Bus:tty19 [ 1.751843] PM: Adding info for No Bus:tty20 [ 1.752316] PM: Adding info for No Bus:tty21 [ 1.752751] PM: Adding info for No Bus:tty22 [ 1.753280] PM: Adding info for No Bus:tty23 [ 1.753708] PM: Adding info for No Bus:tty24 [ 1.754143] PM: Adding info for No Bus:tty25 [ 1.754577] PM: Adding info for No Bus:tty26 [ 1.754998] PM: Adding info for No Bus:tty27 [ 1.755427] PM: Adding info for No Bus:tty28 [ 1.755855] PM: Adding info for No Bus:tty29 [ 1.756396] PM: Adding info for No Bus:tty30 [ 1.756810] PM: Adding info for No Bus:tty31 [ 1.757237] PM: Adding info for No Bus:tty32 [ 1.757676] PM: Adding info for No Bus:tty33 [ 1.758105] PM: Adding info for No Bus:tty34 [ 1.758565] PM: Adding info for No Bus:tty35 [ 1.758988] PM: Adding info for No Bus:tty36 [ 1.759419] PM: Adding info for No Bus:tty37 [ 1.759839] PM: Adding info for No Bus:tty38 [ 1.760306] PM: Adding info for No Bus:tty39 [ 1.760733] PM: Adding info for No Bus:tty40 [ 1.761278] PM: Adding info for No Bus:tty41 [ 1.761708] PM: Adding info for No Bus:tty42 [ 1.762146] PM: Adding info for No Bus:tty43 [ 1.762584] PM: Adding info for No Bus:tty44 [ 1.763016] PM: Adding info for No Bus:tty45 [ 1.763443] PM: Adding info for No Bus:tty46 [ 1.763869] PM: Adding info for No Bus:tty47 [ 1.764407] PM: Adding info for No Bus:tty48 [ 1.764825] PM: Adding info for No Bus:tty49 [ 1.765267] PM: Adding info for No Bus:tty50 [ 1.765693] PM: Adding info for No Bus:tty51 [ 1.766135] PM: Adding info for No Bus:tty52 [ 1.766604] PM: Adding info for No Bus:tty53 [ 1.767044] PM: Adding info for No Bus:tty54 [ 1.767479] PM: Adding info for No Bus:tty55 [ 1.767900] PM: Adding info for No Bus:tty56 [ 1.768353] PM: Adding info for No Bus:tty57 [ 1.768786] PM: Adding info for No Bus:tty58 [ 1.769387] PM: Adding info for No Bus:tty59 [ 1.769807] PM: Adding info for No Bus:tty60 [ 1.770227] PM: Adding info for No Bus:tty61 [ 1.770677] PM: Adding info for No Bus:tty62 [ 1.771115] PM: Adding info for No Bus:tty63 [ 1.771672] initcall tty_init+0x0/0x110 returned 0 after 30986 usecs [ 1.771765] calling pty_init+0x0/0x3e0 @ 1 [ 1.772001] PM: Adding info for No Bus:ptyp0 [ 1.772429] PM: Adding info for No Bus:ptyp1 [ 1.772856] PM: Adding info for No Bus:ptyp2 [ 1.773306] PM: Adding info for No Bus:ptyp3 [ 1.773732] PM: Adding info for No Bus:ptyp4 [ 1.774219] PM: Adding info for No Bus:ptyp5 [ 1.774665] PM: Adding info for No Bus:ptyp6 [ 1.775096] PM: Adding info for No Bus:ptyp7 [ 1.775528] PM: Adding info for No Bus:ptyp8 [ 1.775953] PM: Adding info for No Bus:ptyp9 [ 1.776401] PM: Adding info for No Bus:ptypa [ 1.776816] PM: Adding info for No Bus:ptypb [ 1.777386] PM: Adding info for No Bus:ptypc [ 1.777800] PM: Adding info for No Bus:ptypd [ 1.778227] PM: Adding info for No Bus:ptype [ 1.778668] PM: Adding info for No Bus:ptypf [ 1.779098] PM: Adding info for No Bus:ptyq0 [ 1.779557] PM: Adding info for No Bus:ptyq1 [ 1.779973] PM: Adding info for No Bus:ptyq2 [ 1.780405] PM: Adding info for No Bus:ptyq3 [ 1.780825] PM: Adding info for No Bus:ptyq4 [ 1.781304] PM: Adding info for No Bus:ptyq5 [ 1.781729] PM: Adding info for No Bus:ptyq6 [ 1.782237] PM: Adding info for No Bus:ptyq7 [ 1.782682] PM: Adding info for No Bus:ptyq8 [ 1.783130] PM: Adding info for No Bus:ptyq9 [ 1.783573] PM: Adding info for No Bus:ptyqa [ 1.783992] PM: Adding info for No Bus:ptyqb [ 1.784418] PM: Adding info for No Bus:ptyqc [ 1.784843] PM: Adding info for No Bus:ptyqd [ 1.785401] PM: Adding info for No Bus:ptyqe [ 1.785813] PM: Adding info for No Bus:ptyqf [ 1.786232] PM: Adding info for No Bus:ptyr0 [ 1.786671] PM: Adding info for No Bus:ptyr1 [ 1.787108] PM: Adding info for No Bus:ptyr2 [ 1.787569] PM: Adding info for No Bus:ptyr3 [ 1.787990] PM: Adding info for No Bus:ptyr4 [ 1.788419] PM: Adding info for No Bus:ptyr5 [ 1.788843] PM: Adding info for No Bus:ptyr6 [ 1.789314] PM: Adding info for No Bus:ptyr7 [ 1.789731] PM: Adding info for No Bus:ptyr8 [ 1.790245] PM: Adding info for No Bus:ptyr9 [ 1.790692] PM: Adding info for No Bus:ptyra [ 1.791128] PM: Adding info for No Bus:ptyrb [ 1.791563] PM: Adding info for No Bus:ptyrc [ 1.791988] PM: Adding info for No Bus:ptyrd [ 1.792415] PM: Adding info for No Bus:ptyre [ 1.792837] PM: Adding info for No Bus:ptyrf [ 1.793400] PM: Adding info for No Bus:ptys0 [ 1.793819] PM: Adding info for No Bus:ptys1 [ 1.794244] PM: Adding info for No Bus:ptys2 [ 1.794690] PM: Adding info for No Bus:ptys3 [ 1.795124] PM: Adding info for No Bus:ptys4 [ 1.795589] PM: Adding info for No Bus:ptys5 [ 1.796009] PM: Adding info for No Bus:ptys6 [ 1.796439] PM: Adding info for No Bus:ptys7 [ 1.796860] PM: Adding info for No Bus:ptys8 [ 1.797329] PM: Adding info for No Bus:ptys9 [ 1.797755] PM: Adding info for No Bus:ptysa [ 1.798286] PM: Adding info for No Bus:ptysb [ 1.798716] PM: Adding info for No Bus:ptysc [ 1.799156] PM: Adding info for No Bus:ptysd [ 1.799600] PM: Adding info for No Bus:ptyse [ 1.800027] PM: Adding info for No Bus:ptysf [ 1.800466] PM: Adding info for No Bus:ptyt0 [ 1.800893] PM: Adding info for No Bus:ptyt1 [ 1.801411] PM: Adding info for No Bus:ptyt2 [ 1.801828] PM: Adding info for No Bus:ptyt3 [ 1.802309] PM: Adding info for No Bus:ptyt4 [ 1.802731] PM: Adding info for No Bus:ptyt5 [ 1.803172] PM: Adding info for No Bus:ptyt6 [ 1.803621] PM: Adding info for No Bus:ptyt7 [ 1.804065] PM: Adding info for No Bus:ptyt8 [ 1.804503] PM: Adding info for No Bus:ptyt9 [ 1.804925] PM: Adding info for No Bus:ptyta [ 1.805407] PM: Adding info for No Bus:ptytb [ 1.805961] PM: Adding info for No Bus:ptytc [ 1.806470] PM: Adding info for No Bus:ptytd [ 1.806894] PM: Adding info for No Bus:ptyte [ 1.807352] PM: Adding info for No Bus:ptytf [ 1.807775] PM: Adding info for No Bus:ptyu0 [ 1.808312] PM: Adding info for No Bus:ptyu1 [ 1.808745] PM: Adding info for No Bus:ptyu2 [ 1.809182] PM: Adding info for No Bus:ptyu3 [ 1.809641] PM: Adding info for No Bus:ptyu4 [ 1.810907] PM: Adding info for No Bus:ptyu5 [ 1.811357] PM: Adding info for No Bus:ptyu6 [ 1.811780] PM: Adding info for No Bus:ptyu7 [ 1.812237] PM: Adding info for No Bus:ptyu8 [ 1.812693] PM: Adding info for No Bus:ptyu9 [ 1.813129] PM: Adding info for No Bus:ptyua [ 1.813569] PM: Adding info for No Bus:ptyub [ 1.814010] PM: Adding info for No Bus:ptyuc [ 1.814439] PM: Adding info for No Bus:ptyud [ 1.814862] PM: Adding info for No Bus:ptyue [ 1.815316] PM: Adding info for No Bus:ptyuf [ 1.815746] PM: Adding info for No Bus:ptyv0 [ 1.816246] PM: Adding info for No Bus:ptyv1 [ 1.816694] PM: Adding info for No Bus:ptyv2 [ 1.817148] PM: Adding info for No Bus:ptyv3 [ 1.817584] PM: Adding info for No Bus:ptyv4 [ 1.818018] PM: Adding info for No Bus:ptyv5 [ 1.818445] PM: Adding info for No Bus:ptyv6 [ 1.818867] PM: Adding info for No Bus:ptyv7 [ 1.819396] PM: Adding info for No Bus:ptyv8 [ 1.819816] PM: Adding info for No Bus:ptyv9 [ 1.820243] PM: Adding info for No Bus:ptyva [ 1.820687] PM: Adding info for No Bus:ptyvb [ 1.821122] PM: Adding info for No Bus:ptyvc [ 1.821588] PM: Adding info for No Bus:ptyvd [ 1.822012] PM: Adding info for No Bus:ptyve [ 1.822447] PM: Adding info for No Bus:ptyvf [ 1.822881] PM: Adding info for No Bus:ptyw0 [ 1.823342] PM: Adding info for No Bus:ptyw1 [ 1.823767] PM: Adding info for No Bus:ptyw2 [ 1.824302] PM: Adding info for No Bus:ptyw3 [ 1.824741] PM: Adding info for No Bus:ptyw4 [ 1.825193] PM: Adding info for No Bus:ptyw5 [ 1.825637] PM: Adding info for No Bus:ptyw6 [ 1.826078] PM: Adding info for No Bus:ptyw7 [ 1.826520] PM: Adding info for No Bus:ptyw8 [ 1.826944] PM: Adding info for No Bus:ptyw9 [ 1.827463] PM: Adding info for No Bus:ptywa [ 1.827888] PM: Adding info for No Bus:ptywb [ 1.828357] PM: Adding info for No Bus:ptywc [ 1.828779] PM: Adding info for No Bus:ptywd [ 1.829247] PM: Adding info for No Bus:ptywe [ 1.829718] PM: Adding info for No Bus:ptywf [ 1.830149] PM: Adding info for No Bus:ptyx0 [ 1.830608] PM: Adding info for No Bus:ptyx1 [ 1.831055] PM: Adding info for No Bus:ptyx2 [ 1.831499] PM: Adding info for No Bus:ptyx3 [ 1.831931] PM: Adding info for No Bus:ptyx4 [ 1.832394] PM: Adding info for No Bus:ptyx5 [ 1.832822] PM: Adding info for No Bus:ptyx6 [ 1.833385] PM: Adding info for No Bus:ptyx7 [ 1.833807] PM: Adding info for No Bus:ptyx8 [ 1.834235] PM: Adding info for No Bus:ptyx9 [ 1.834678] PM: Adding info for No Bus:ptyxa [ 1.835112] PM: Adding info for No Bus:ptyxb [ 1.835578] PM: Adding info for No Bus:ptyxc [ 1.836005] PM: Adding info for No Bus:ptyxd [ 1.836436] PM: Adding info for No Bus:ptyxe [ 1.836859] PM: Adding info for No Bus:ptyxf [ 1.837319] PM: Adding info for No Bus:ptyy0 [ 1.837748] PM: Adding info for No Bus:ptyy1 [ 1.838285] PM: Adding info for No Bus:ptyy2 [ 1.838731] PM: Adding info for No Bus:ptyy3 [ 1.839180] PM: Adding info for No Bus:ptyy4 [ 1.839631] PM: Adding info for No Bus:ptyy5 [ 1.840071] PM: Adding info for No Bus:ptyy6 [ 1.840513] PM: Adding info for No Bus:ptyy7 [ 1.840941] PM: Adding info for No Bus:ptyy8 [ 1.841449] PM: Adding info for No Bus:ptyy9 [ 1.841873] PM: Adding info for No Bus:ptyya [ 1.842332] PM: Adding info for No Bus:ptyyb [ 1.842758] PM: Adding info for No Bus:ptyyc [ 1.843207] PM: Adding info for No Bus:ptyyd [ 1.843661] PM: Adding info for No Bus:ptyye [ 1.844106] PM: Adding info for No Bus:ptyyf [ 1.844556] PM: Adding info for No Bus:ptyz0 [ 1.844986] PM: Adding info for No Bus:ptyz1 [ 1.845439] PM: Adding info for No Bus:ptyz2 [ 1.845864] PM: Adding info for No Bus:ptyz3 [ 1.846392] PM: Adding info for No Bus:ptyz4 [ 1.846820] PM: Adding info for No Bus:ptyz5 [ 1.847269] PM: Adding info for No Bus:ptyz6 [ 1.847696] PM: Adding info for No Bus:ptyz7 [ 1.848134] PM: Adding info for No Bus:ptyz8 [ 1.848613] PM: Adding info for No Bus:ptyz9 [ 1.849043] PM: Adding info for No Bus:ptyza [ 1.849487] PM: Adding info for No Bus:ptyzb [ 1.849920] PM: Adding info for No Bus:ptyzc [ 1.850385] PM: Adding info for No Bus:ptyzd [ 1.850822] PM: Adding info for No Bus:ptyze [ 1.851313] PM: Adding info for No Bus:ptyzf [ 1.851741] PM: Adding info for No Bus:ptya0 [ 1.852278] PM: Adding info for No Bus:ptya1 [ 1.852717] PM: Adding info for No Bus:ptya2 [ 1.853171] PM: Adding info for No Bus:ptya3 [ 1.853617] PM: Adding info for No Bus:ptya4 [ 1.854050] PM: Adding info for No Bus:ptya5 [ 1.854497] PM: Adding info for No Bus:ptya6 [ 1.854932] PM: Adding info for No Bus:ptya7 [ 1.855450] PM: Adding info for No Bus:ptya8 [ 1.855883] PM: Adding info for No Bus:ptya9 [ 1.856339] PM: Adding info for No Bus:ptyaa [ 1.856764] PM: Adding info for No Bus:ptyab [ 1.857245] PM: Adding info for No Bus:ptyac [ 1.857734] PM: Adding info for No Bus:ptyad [ 1.858183] PM: Adding info for No Bus:ptyae [ 1.858633] PM: Adding info for No Bus:ptyaf [ 1.859068] PM: Adding info for No Bus:ptyb0 [ 1.859511] PM: Adding info for No Bus:ptyb1 [ 1.859946] PM: Adding info for No Bus:ptyb2 [ 1.860463] PM: Adding info for No Bus:ptyb3 [ 1.860891] PM: Adding info for No Bus:ptyb4 [ 1.861354] PM: Adding info for No Bus:ptyb5 [ 1.861783] PM: Adding info for No Bus:ptyb6 [ 1.862314] PM: Adding info for No Bus:ptyb7 [ 1.862739] PM: Adding info for No Bus:ptyb8 [ 1.863190] PM: Adding info for No Bus:ptyb9 [ 1.863662] PM: Adding info for No Bus:ptyba [ 1.864109] PM: Adding info for No Bus:ptybb [ 1.864560] PM: Adding info for No Bus:ptybc [ 1.864990] PM: Adding info for No Bus:ptybd [ 1.865426] PM: Adding info for No Bus:ptybe [ 1.865867] PM: Adding info for No Bus:ptybf [ 1.866399] PM: Adding info for No Bus:ptyc0 [ 1.866824] PM: Adding info for No Bus:ptyc1 [ 1.867276] PM: Adding info for No Bus:ptyc2 [ 1.867707] PM: Adding info for No Bus:ptyc3 [ 1.868149] PM: Adding info for No Bus:ptyc4 [ 1.868629] PM: Adding info for No Bus:ptyc5 [ 1.869070] PM: Adding info for No Bus:ptyc6 [ 1.869516] PM: Adding info for No Bus:ptyc7 [ 1.869956] PM: Adding info for No Bus:ptyc8 [ 1.870411] PM: Adding info for No Bus:ptyc9 [ 1.870993] PM: Adding info for No Bus:ptyca [ 1.871489] PM: Adding info for No Bus:ptycb [ 1.871921] PM: Adding info for No Bus:ptycc [ 1.872381] PM: Adding info for No Bus:ptycd [ 1.872806] PM: Adding info for No Bus:ptyce [ 1.873320] PM: Adding info for No Bus:ptycf [ 1.873759] PM: Adding info for No Bus:ptyd0 [ 1.874208] PM: Adding info for No Bus:ptyd1 [ 1.874687] PM: Adding info for No Bus:ptyd2 [ 1.875151] PM: Adding info for No Bus:ptyd3 [ 1.875594] PM: Adding info for No Bus:ptyd4 [ 1.876032] PM: Adding info for No Bus:ptyd5 [ 1.876483] PM: Adding info for No Bus:ptyd6 [ 1.876912] PM: Adding info for No Bus:ptyd7 [ 1.877440] PM: Adding info for No Bus:ptyd8 [ 1.877870] PM: Adding info for No Bus:ptyd9 [ 1.878339] PM: Adding info for No Bus:ptyda [ 1.878775] PM: Adding info for No Bus:ptydb [ 1.879218] PM: Adding info for No Bus:ptydc [ 1.879666] PM: Adding info for No Bus:ptydd [ 1.880108] PM: Adding info for No Bus:ptyde [ 1.880580] PM: Adding info for No Bus:ptydf [ 1.881012] PM: Adding info for No Bus:ptye0 [ 1.881450] PM: Adding info for No Bus:ptye1 [ 1.881883] PM: Adding info for No Bus:ptye2 [ 1.882350] PM: Adding info for No Bus:ptye3 [ 1.882791] PM: Adding info for No Bus:ptye4 [ 1.883317] PM: Adding info for No Bus:ptye5 [ 1.883750] PM: Adding info for No Bus:ptye6 [ 1.884294] PM: Adding info for No Bus:ptye7 [ 1.884741] PM: Adding info for No Bus:ptye8 [ 1.885200] PM: Adding info for No Bus:ptye9 [ 1.885647] PM: Adding info for No Bus:ptyea [ 1.886085] PM: Adding info for No Bus:ptyeb [ 1.886536] PM: Adding info for No Bus:ptyec [ 1.886975] PM: Adding info for No Bus:ptyed [ 1.887471] PM: Adding info for No Bus:ptyee [ 1.887896] PM: Adding info for No Bus:ptyef [ 1.888370] PM: Adding info for No Bus:ttyp0 [ 1.888804] PM: Adding info for No Bus:ttyp1 [ 1.889291] PM: Adding info for No Bus:ttyp2 [ 1.889721] PM: Adding info for No Bus:ttyp3 [ 1.890223] PM: Adding info for No Bus:ttyp4 [ 1.890677] PM: Adding info for No Bus:ttyp5 [ 1.891119] PM: Adding info for No Bus:ttyp6 [ 1.891568] PM: Adding info for No Bus:ttyp7 [ 1.892006] PM: Adding info for No Bus:ttyp8 [ 1.893230] PM: Adding info for No Bus:ttyp9 [ 1.893723] PM: Adding info for No Bus:ttypa [ 1.894304] PM: Adding info for No Bus:ttypb [ 1.894742] PM: Adding info for No Bus:ttypc [ 1.895196] PM: Adding info for No Bus:ttypd [ 1.895648] PM: Adding info for No Bus:ttype [ 1.896084] PM: Adding info for No Bus:ttypf [ 1.896553] PM: Adding info for No Bus:ttyq0 [ 1.896997] PM: Adding info for No Bus:ttyq1 [ 1.897468] PM: Adding info for No Bus:ttyq2 [ 1.897895] PM: Adding info for No Bus:ttyq3 [ 1.898355] PM: Adding info for No Bus:ttyq4 [ 1.898784] PM: Adding info for No Bus:ttyq5 [ 1.899324] PM: Adding info for No Bus:ttyq6 [ 1.899752] PM: Adding info for No Bus:ttyq7 [ 1.900205] PM: Adding info for No Bus:ttyq8 [ 1.900688] PM: Adding info for No Bus:ttyq9 [ 1.901141] PM: Adding info for No Bus:ttyqa [ 1.901587] PM: Adding info for No Bus:ttyqb [ 1.902034] PM: Adding info for No Bus:ttyqc [ 1.902485] PM: Adding info for No Bus:ttyqd [ 1.902916] PM: Adding info for No Bus:ttyqe [ 1.903440] PM: Adding info for No Bus:ttyqf [ 1.903871] PM: Adding info for No Bus:ttyr0 [ 1.904330] PM: Adding info for No Bus:ttyr1 [ 1.904766] PM: Adding info for No Bus:ttyr2 [ 1.905218] PM: Adding info for No Bus:ttyr3 [ 1.905682] PM: Adding info for No Bus:ttyr4 [ 1.906138] PM: Adding info for No Bus:ttyr5 [ 1.906583] PM: Adding info for No Bus:ttyr6 [ 1.907020] PM: Adding info for No Bus:ttyr7 [ 1.907459] PM: Adding info for No Bus:ttyr8 [ 1.907891] PM: Adding info for No Bus:ttyr9 [ 1.908412] PM: Adding info for No Bus:ttyra [ 1.908849] PM: Adding info for No Bus:ttyrb [ 1.909319] PM: Adding info for No Bus:ttyrc [ 1.909756] PM: Adding info for No Bus:ttyrd [ 1.910207] PM: Adding info for No Bus:ttyre [ 1.910685] PM: Adding info for No Bus:ttyrf [ 1.911132] PM: Adding info for No Bus:ttys0 [ 1.911586] PM: Adding info for No Bus:ttys1 [ 1.912029] PM: Adding info for No Bus:ttys2 [ 1.912499] PM: Adding info for No Bus:ttys3 [ 1.912934] PM: Adding info for No Bus:ttys4 [ 1.913449] PM: Adding info for No Bus:ttys5 [ 1.913879] PM: Adding info for No Bus:ttys6 [ 1.914345] PM: Adding info for No Bus:ttys7 [ 1.914785] PM: Adding info for No Bus:ttys8 [ 1.915235] PM: Adding info for No Bus:ttys9 [ 1.915694] PM: Adding info for No Bus:ttysa [ 1.916142] PM: Adding info for No Bus:ttysb [ 1.916624] PM: Adding info for No Bus:ttysc [ 1.917077] PM: Adding info for No Bus:ttysd [ 1.917526] PM: Adding info for No Bus:ttyse [ 1.917966] PM: Adding info for No Bus:ttysf [ 1.918418] PM: Adding info for No Bus:ttyt0 [ 1.918865] PM: Adding info for No Bus:ttyt1 [ 1.919414] PM: Adding info for No Bus:ttyt2 [ 1.919849] PM: Adding info for No Bus:ttyt3 [ 1.920301] PM: Adding info for No Bus:ttyt4 [ 1.920739] PM: Adding info for No Bus:ttyt5 [ 1.921311] PM: Adding info for No Bus:ttyt6 [ 1.921753] PM: Adding info for No Bus:ttyt7 [ 1.922213] PM: Adding info for No Bus:ttyt8 [ 1.922662] PM: Adding info for No Bus:ttyt9 [ 1.923108] PM: Adding info for No Bus:ttyta [ 1.923566] PM: Adding info for No Bus:ttytb [ 1.924006] PM: Adding info for No Bus:ttytc [ 1.924483] PM: Adding info for No Bus:ttytd [ 1.924918] PM: Adding info for No Bus:ttyte [ 1.925394] PM: Adding info for No Bus:ttytf [ 1.925830] PM: Adding info for No Bus:ttyu0 [ 1.926342] PM: Adding info for No Bus:ttyu1 [ 1.926781] PM: Adding info for No Bus:ttyu2 [ 1.927288] PM: Adding info for No Bus:ttyu3 [ 1.927741] PM: Adding info for No Bus:ttyu4 [ 1.928308] PM: Adding info for No Bus:ttyu5 [ 1.928755] PM: Adding info for No Bus:ttyu6 [ 1.929222] PM: Adding info for No Bus:ttyu7 [ 1.929679] PM: Adding info for No Bus:ttyu8 [ 1.930124] PM: Adding info for No Bus:ttyu9 [ 1.930573] PM: Adding info for No Bus:ttyua [ 1.931014] PM: Adding info for No Bus:ttyub [ 1.931474] PM: Adding info for No Bus:ttyuc [ 1.931917] PM: Adding info for No Bus:ttyud [ 1.932392] PM: Adding info for No Bus:ttyue [ 1.932827] PM: Adding info for No Bus:ttyuf [ 1.933341] PM: Adding info for No Bus:ttyv0 [ 1.933774] PM: Adding info for No Bus:ttyv1 [ 1.934291] PM: Adding info for No Bus:ttyv2 [ 1.934744] PM: Adding info for No Bus:ttyv3 [ 1.935202] PM: Adding info for No Bus:ttyv4 [ 1.935656] PM: Adding info for No Bus:ttyv5 [ 1.936109] PM: Adding info for No Bus:ttyv6 [ 1.936709] PM: Adding info for No Bus:ttyv7 [ 1.937166] PM: Adding info for No Bus:ttyv8 [ 1.937692] PM: Adding info for No Bus:ttyv9 [ 1.938146] PM: Adding info for No Bus:ttyva [ 1.938597] PM: Adding info for No Bus:ttyvb [ 1.939043] PM: Adding info for No Bus:ttyvc [ 1.939507] PM: Adding info for No Bus:ttyvd [ 1.939957] PM: Adding info for No Bus:ttyve [ 1.940488] PM: Adding info for No Bus:ttyvf [ 1.940922] PM: Adding info for No Bus:ttyw0 [ 1.941391] PM: Adding info for No Bus:ttyw1 [ 1.941829] PM: Adding info for No Bus:ttyw2 [ 1.942328] PM: Adding info for No Bus:ttyw3 [ 1.942768] PM: Adding info for No Bus:ttyw4 [ 1.943229] PM: Adding info for No Bus:ttyw5 [ 1.943728] PM: Adding info for No Bus:ttyw6 [ 1.944190] PM: Adding info for No Bus:ttyw7 [ 1.944646] PM: Adding info for No Bus:ttyw8 [ 1.945099] PM: Adding info for No Bus:ttyw9 [ 1.945573] PM: Adding info for No Bus:ttywa [ 1.946015] PM: Adding info for No Bus:ttywb [ 1.946489] PM: Adding info for No Bus:ttywc [ 1.946928] PM: Adding info for No Bus:ttywd [ 1.947402] PM: Adding info for No Bus:ttywe [ 1.947841] PM: Adding info for No Bus:ttywf [ 1.948350] PM: Adding info for No Bus:ttyx0 [ 1.948789] PM: Adding info for No Bus:ttyx1 [ 1.949293] PM: Adding info for No Bus:ttyx2 [ 1.949734] PM: Adding info for No Bus:ttyx3 [ 1.950299] PM: Adding info for No Bus:ttyx4 [ 1.950744] PM: Adding info for No Bus:ttyx5 [ 1.951214] PM: Adding info for No Bus:ttyx6 [ 1.951671] PM: Adding info for No Bus:ttyx7 [ 1.952120] PM: Adding info for No Bus:ttyx8 [ 1.952574] PM: Adding info for No Bus:ttyx9 [ 1.953021] PM: Adding info for No Bus:ttyxa [ 1.953536] PM: Adding info for No Bus:ttyxb [ 1.953978] PM: Adding info for No Bus:ttyxc [ 1.954440] PM: Adding info for No Bus:ttyxd [ 1.954882] PM: Adding info for No Bus:ttyxe [ 1.955373] PM: Adding info for No Bus:ttyxf [ 1.955811] PM: Adding info for No Bus:ttyy0 [ 1.956303] PM: Adding info for No Bus:ttyy1 [ 1.956752] PM: Adding info for No Bus:ttyy2 [ 1.957327] PM: Adding info for No Bus:ttyy3 [ 1.957779] PM: Adding info for No Bus:ttyy4 [ 1.958247] PM: Adding info for No Bus:ttyy5 [ 1.958710] PM: Adding info for No Bus:ttyy6 [ 1.959159] PM: Adding info for No Bus:ttyy7 [ 1.959627] PM: Adding info for No Bus:ttyy8 [ 1.960077] PM: Adding info for No Bus:ttyy9 [ 1.960592] PM: Adding info for No Bus:ttyya [ 1.961041] PM: Adding info for No Bus:ttyyb [ 1.961550] PM: Adding info for No Bus:ttyyc [ 1.961988] PM: Adding info for No Bus:ttyyd [ 1.962449] PM: Adding info for No Bus:ttyye [ 1.962907] PM: Adding info for No Bus:ttyyf [ 1.963400] PM: Adding info for No Bus:ttyz0 [ 1.963844] PM: Adding info for No Bus:ttyz1 [ 1.964346] PM: Adding info for No Bus:ttyz2 [ 1.964794] PM: Adding info for No Bus:ttyz3 [ 1.965318] PM: Adding info for No Bus:ttyz4 [ 1.965766] PM: Adding info for No Bus:ttyz5 [ 1.966309] PM: Adding info for No Bus:ttyz6 [ 1.966765] PM: Adding info for No Bus:ttyz7 [ 1.967235] PM: Adding info for No Bus:ttyz8 [ 1.967695] PM: Adding info for No Bus:ttyz9 [ 1.968157] PM: Adding info for No Bus:ttyza [ 1.968637] PM: Adding info for No Bus:ttyzb [ 1.969086] PM: Adding info for No Bus:ttyzc [ 1.969594] PM: Adding info for No Bus:ttyzd [ 1.970043] PM: Adding info for No Bus:ttyze [ 1.970555] PM: Adding info for No Bus:ttyzf [ 1.971005] PM: Adding info for No Bus:ttya0 [ 1.971458] PM: Adding info for No Bus:ttya1 [ 1.971905] PM: Adding info for No Bus:ttya2 [ 1.972392] PM: Adding info for No Bus:ttya3 [ 1.972849] PM: Adding info for No Bus:ttya4 [ 1.973356] PM: Adding info for No Bus:ttya5 [ 1.973800] PM: Adding info for No Bus:ttya6 [ 1.974324] PM: Adding info for No Bus:ttya7 [ 1.974775] PM: Adding info for No Bus:ttya8 [ 1.975321] PM: Adding info for No Bus:ttya9 [ 1.975760] PM: Adding info for No Bus:ttyaa [ 1.976318] PM: Adding info for No Bus:ttyab [ 1.976771] PM: Adding info for No Bus:ttyac [ 1.978008] PM: Adding info for No Bus:ttyad [ 1.978457] PM: Adding info for No Bus:ttyae [ 1.978912] PM: Adding info for No Bus:ttyaf [ 1.979404] PM: Adding info for No Bus:ttyb0 [ 1.979845] PM: Adding info for No Bus:ttyb1 [ 1.980329] PM: Adding info for No Bus:ttyb2 [ 1.980791] PM: Adding info for No Bus:ttyb3 [ 1.981238] PM: Adding info for No Bus:ttyb4 [ 1.981711] PM: Adding info for No Bus:ttyb5 [ 1.982162] PM: Adding info for No Bus:ttyb6 [ 1.982646] PM: Adding info for No Bus:ttyb7 [ 1.983104] PM: Adding info for No Bus:ttyb8 [ 1.983569] PM: Adding info for No Bus:ttyb9 [ 1.984023] PM: Adding info for No Bus:ttyba [ 1.984485] PM: Adding info for No Bus:ttybb [ 1.984935] PM: Adding info for No Bus:ttybc [ 1.985470] PM: Adding info for No Bus:ttybd [ 1.985914] PM: Adding info for No Bus:ttybe [ 1.986398] PM: Adding info for No Bus:ttybf [ 1.986846] PM: Adding info for No Bus:ttyc0 [ 1.987339] PM: Adding info for No Bus:ttyc1 [ 1.987789] PM: Adding info for No Bus:ttyc2 [ 1.988241] PM: Adding info for No Bus:ttyc3 [ 1.988730] PM: Adding info for No Bus:ttyc4 [ 1.989293] PM: Adding info for No Bus:ttyc5 [ 1.989746] PM: Adding info for No Bus:ttyc6 [ 1.990215] PM: Adding info for No Bus:ttyc7 [ 1.990679] PM: Adding info for No Bus:ttyc8 [ 1.991139] PM: Adding info for No Bus:ttyc9 [ 1.991613] PM: Adding info for No Bus:ttyca [ 1.992070] PM: Adding info for No Bus:ttycb [ 1.992581] PM: Adding info for No Bus:ttycc [ 1.993036] PM: Adding info for No Bus:ttycd [ 1.993506] PM: Adding info for No Bus:ttyce [ 1.993948] PM: Adding info for No Bus:ttycf [ 1.994452] PM: Adding info for No Bus:ttyd0 [ 1.994896] PM: Adding info for No Bus:ttyd1 [ 1.995371] PM: Adding info for No Bus:ttyd2 [ 1.995823] PM: Adding info for No Bus:ttyd3 [ 1.996351] PM: Adding info for No Bus:ttyd4 [ 1.996795] PM: Adding info for No Bus:ttyd5 [ 1.997326] PM: Adding info for No Bus:ttyd6 [ 1.997788] PM: Adding info for No Bus:ttyd7 [ 1.998317] PM: Adding info for No Bus:ttyd8 [ 1.998767] PM: Adding info for No Bus:ttyd9 [ 1.999327] PM: Adding info for No Bus:ttyda [ 1.999783] PM: Adding info for No Bus:ttydb [ 2.000278] PM: Adding info for No Bus:ttydc [ 2.000733] PM: Adding info for No Bus:ttydd [ 2.001294] PM: Adding info for No Bus:ttyde [ 2.001750] PM: Adding info for No Bus:ttydf [ 2.002216] PM: Adding info for No Bus:ttye0 [ 2.002735] PM: Adding info for No Bus:ttye1 [ 2.003370] PM: Adding info for No Bus:ttye2 [ 2.003821] PM: Adding info for No Bus:ttye3 [ 2.004309] PM: Adding info for No Bus:ttye4 [ 2.004884] PM: Adding info for No Bus:ttye5 [ 2.005403] PM: Adding info for No Bus:ttye6 [ 2.005872] PM: Adding info for No Bus:ttye7 [ 2.006424] PM: Adding info for No Bus:ttye8 [ 2.006871] PM: Adding info for No Bus:ttye9 [ 2.007333] PM: Adding info for No Bus:ttyea [ 2.007786] PM: Adding info for No Bus:ttyeb [ 2.008344] PM: Adding info for No Bus:ttyec [ 2.008793] PM: Adding info for No Bus:ttyed [ 2.009337] PM: Adding info for No Bus:ttyee [ 2.009787] PM: Adding info for No Bus:ttyef [ 2.010380] PM: Adding info for No Bus:ptmx [ 2.010695] initcall pty_init+0x0/0x3e0 returned 0 after 233237 usecs [ 2.010788] calling sysrq_init+0x0/0x30 @ 1 [ 2.010905] initcall sysrq_init+0x0/0x30 returned 0 after 25 usecs [ 2.010998] calling cy_init+0x0/0x490 @ 1 [ 2.011096] Cyclades driver 2.5 (built Aug 21 2009 22:16:19) [ 2.026572] initcall cy_init+0x0/0x490 returned 0 after 15115 usecs [ 2.026665] calling nozomi_init+0x0/0x110 @ 1 [ 2.026754] Initializing Nozomi driver 2.1d (build date: Aug 21 2009 22:16:20) [ 2.027244] initcall nozomi_init+0x0/0x110 returned 0 after 476 usecs [ 2.027353] calling epca_module_init+0x0/0x480 @ 1 [ 2.027452] DIGI epca driver version 1.3.0.1-LK2.6 loaded. [ 2.027985] PM: Adding info for No Bus:ttyD0 [ 2.028443] PM: Adding info for No Bus:ttyD1 [ 2.028898] PM: Adding info for No Bus:ttyD2 [ 2.029371] PM: Adding info for No Bus:ttyD3 [ 2.029820] PM: Adding info for No Bus:ttyD4 [ 2.030328] PM: Adding info for No Bus:ttyD5 [ 2.030782] PM: Adding info for No Bus:ttyD6 [ 2.031324] PM: Adding info for No Bus:ttyD7 [ 2.031774] PM: Adding info for No Bus:ttyD8 [ 2.032310] PM: Adding info for No Bus:ttyD9 [ 2.032775] PM: Adding info for No Bus:ttyD10 [ 2.033263] PM: Adding info for No Bus:ttyD11 [ 2.033720] PM: Adding info for No Bus:ttyD12 [ 2.034273] PM: Adding info for No Bus:ttyD13 [ 2.034730] PM: Adding info for No Bus:ttyD14 [ 2.035198] PM: Adding info for No Bus:ttyD15 [ 2.035715] PM: Adding info for No Bus:ttyD16 [ 2.036176] PM: Adding info for No Bus:ttyD17 [ 2.036698] PM: Adding info for No Bus:ttyD18 [ 2.037152] PM: Adding info for No Bus:ttyD19 [ 2.037622] PM: Adding info for No Bus:ttyD20 [ 2.038073] PM: Adding info for No Bus:ttyD21 [ 2.038556] PM: Adding info for No Bus:ttyD22 [ 2.039007] PM: Adding info for No Bus:ttyD23 [ 2.039504] PM: Adding info for No Bus:ttyD24 [ 2.039949] PM: Adding info for No Bus:ttyD25 [ 2.040422] PM: Adding info for No Bus:ttyD26 [ 2.040868] PM: Adding info for No Bus:ttyD27 [ 2.041362] PM: Adding info for No Bus:ttyD28 [ 2.041812] PM: Adding info for No Bus:ttyD29 [ 2.042315] PM: Adding info for No Bus:ttyD30 [ 2.042765] PM: Adding info for No Bus:ttyD31 [ 2.043328] PM: Adding info for No Bus:ttyD32 [ 2.043786] PM: Adding info for No Bus:ttyD33 [ 2.044277] PM: Adding info for No Bus:ttyD34 [ 2.044737] PM: Adding info for No Bus:ttyD35 [ 2.045281] PM: Adding info for No Bus:ttyD36 [ 2.045737] PM: Adding info for No Bus:ttyD37 [ 2.046195] PM: Adding info for No Bus:ttyD38 [ 2.046712] PM: Adding info for No Bus:ttyD39 [ 2.047168] PM: Adding info for No Bus:ttyD40 [ 2.047688] PM: Adding info for No Bus:ttyD41 [ 2.048146] PM: Adding info for No Bus:ttyD42 [ 2.048607] PM: Adding info for No Bus:ttyD43 [ 2.049072] PM: Adding info for No Bus:ttyD44 [ 2.049564] PM: Adding info for No Bus:ttyD45 [ 2.050020] PM: Adding info for No Bus:ttyD46 [ 2.050556] PM: Adding info for No Bus:ttyD47 [ 2.051003] PM: Adding info for No Bus:ttyD48 [ 2.051460] PM: Adding info for No Bus:ttyD49 [ 2.051911] PM: Adding info for No Bus:ttyD50 [ 2.052403] PM: Adding info for No Bus:ttyD51 [ 2.052852] PM: Adding info for No Bus:ttyD52 [ 2.053360] PM: Adding info for No Bus:ttyD53 [ 2.053818] PM: Adding info for No Bus:ttyD54 [ 2.054292] PM: Adding info for No Bus:ttyD55 [ 2.054755] PM: Adding info for No Bus:ttyD56 [ 2.055326] PM: Adding info for No Bus:ttyD57 [ 2.055782] PM: Adding info for No Bus:ttyD58 [ 2.056268] PM: Adding info for No Bus:ttyD59 [ 2.056724] PM: Adding info for No Bus:ttyD60 [ 2.057267] PM: Adding info for No Bus:ttyD61 [ 2.057727] PM: Adding info for No Bus:ttyD62 [ 2.058203] PM: Adding info for No Bus:ttyD63 [ 2.058718] PM: Adding info for No Bus:ttyD64 [ 2.059353] PM: Adding info for No Bus:ttyD65 [ 2.059810] PM: Adding info for No Bus:ttyD66 [ 2.060289] PM: Adding info for No Bus:ttyD67 [ 2.060748] PM: Adding info for No Bus:ttyD68 [ 2.061299] PM: Adding info for No Bus:ttyD69 [ 2.061756] PM: Adding info for No Bus:ttyD70 [ 2.062217] PM: Adding info for No Bus:ttyD71 [ 2.062753] PM: Adding info for No Bus:ttyD72 [ 2.063384] PM: Adding info for No Bus:ttyD73 [ 2.063843] PM: Adding info for No Bus:ttyD74 [ 2.064314] PM: Adding info for No Bus:ttyD75 [ 2.064763] PM: Adding info for No Bus:ttyD76 [ 2.065308] PM: Adding info for No Bus:ttyD77 [ 2.065769] PM: Adding info for No Bus:ttyD78 [ 2.066248] PM: Adding info for No Bus:ttyD79 [ 2.066765] PM: Adding info for No Bus:ttyD80 [ 2.067427] PM: Adding info for No Bus:ttyD81 [ 2.067886] PM: Adding info for No Bus:ttyD82 [ 2.068358] PM: Adding info for No Bus:ttyD83 [ 2.068814] PM: Adding info for No Bus:ttyD84 [ 2.069311] PM: Adding info for No Bus:ttyD85 [ 2.069764] PM: Adding info for No Bus:ttyD86 [ 2.070237] PM: Adding info for No Bus:ttyD87 [ 2.070760] PM: Adding info for No Bus:ttyD88 [ 2.071242] PM: Adding info for No Bus:ttyD89 [ 2.071710] PM: Adding info for No Bus:ttyD90 [ 2.072169] PM: Adding info for No Bus:ttyD91 [ 2.072653] PM: Adding info for No Bus:ttyD92 [ 2.073129] PM: Adding info for No Bus:ttyD93 [ 2.073664] PM: Adding info for No Bus:ttyD94 [ 2.074135] PM: Adding info for No Bus:ttyD95 [ 2.074656] PM: Adding info for No Bus:ttyD96 [ 2.075122] PM: Adding info for No Bus:ttyD97 [ 2.075618] PM: Adding info for No Bus:ttyD98 [ 2.076080] PM: Adding info for No Bus:ttyD99 [ 2.077365] PM: Adding info for No Bus:ttyD100 [ 2.077817] PM: Adding info for No Bus:ttyD101 [ 2.078333] PM: Adding info for No Bus:ttyD102 [ 2.078796] PM: Adding info for No Bus:ttyD103 [ 2.079277] PM: Adding info for No Bus:ttyD104 [ 2.079738] PM: Adding info for No Bus:ttyD105 [ 2.080316] PM: Adding info for No Bus:ttyD106 [ 2.080777] PM: Adding info for No Bus:ttyD107 [ 2.081277] PM: Adding info for No Bus:ttyD108 [ 2.081745] PM: Adding info for No Bus:ttyD109 [ 2.082284] PM: Adding info for No Bus:ttyD110 [ 2.082751] PM: Adding info for No Bus:ttyD111 [ 2.083225] PM: Adding info for No Bus:ttyD112 [ 2.083754] PM: Adding info for No Bus:ttyD113 [ 2.084405] PM: Adding info for No Bus:ttyD114 [ 2.084865] PM: Adding info for No Bus:ttyD115 [ 2.085343] PM: Adding info for No Bus:ttyD116 [ 2.085807] PM: Adding info for No Bus:ttyD117 [ 2.086312] PM: Adding info for No Bus:ttyD118 [ 2.086771] PM: Adding info for No Bus:ttyD119 [ 2.087242] PM: Adding info for No Bus:ttyD120 [ 2.087772] PM: Adding info for No Bus:ttyD121 [ 2.088275] PM: Adding info for No Bus:ttyD122 [ 2.088734] PM: Adding info for No Bus:ttyD123 [ 2.089291] PM: Adding info for No Bus:ttyD124 [ 2.089755] PM: Adding info for No Bus:ttyD125 [ 2.090227] PM: Adding info for No Bus:ttyD126 [ 2.090893] PM: Adding info for No Bus:ttyD127 [ 2.091449] PM: Adding info for No Bus:ttyD128 [ 2.091912] PM: Adding info for No Bus:ttyD129 [ 2.092419] PM: Adding info for No Bus:ttyD130 [ 2.092873] PM: Adding info for No Bus:ttyD131 [ 2.093386] PM: Adding info for No Bus:ttyD132 [ 2.093842] PM: Adding info for No Bus:ttyD133 [ 2.094360] PM: Adding info for No Bus:ttyD134 [ 2.094817] PM: Adding info for No Bus:ttyD135 [ 2.095337] PM: Adding info for No Bus:ttyD136 [ 2.095798] PM: Adding info for No Bus:ttyD137 [ 2.096322] PM: Adding info for No Bus:ttyD138 [ 2.096790] PM: Adding info for No Bus:ttyD139 [ 2.097339] PM: Adding info for No Bus:ttyD140 [ 2.097801] PM: Adding info for No Bus:ttyD141 [ 2.098330] PM: Adding info for No Bus:ttyD142 [ 2.098790] PM: Adding info for No Bus:ttyD143 [ 2.099330] PM: Adding info for No Bus:ttyD144 [ 2.099794] PM: Adding info for No Bus:ttyD145 [ 2.100338] PM: Adding info for No Bus:ttyD146 [ 2.100804] PM: Adding info for No Bus:ttyD147 [ 2.101337] PM: Adding info for No Bus:ttyD148 [ 2.101806] PM: Adding info for No Bus:ttyD149 [ 2.102336] PM: Adding info for No Bus:ttyD150 [ 2.102793] PM: Adding info for No Bus:ttyD151 [ 2.103337] PM: Adding info for No Bus:ttyD152 [ 2.103797] PM: Adding info for No Bus:ttyD153 [ 2.104343] PM: Adding info for No Bus:ttyD154 [ 2.104802] PM: Adding info for No Bus:ttyD155 [ 2.105333] PM: Adding info for No Bus:ttyD156 [ 2.105795] PM: Adding info for No Bus:ttyD157 [ 2.106335] PM: Adding info for No Bus:ttyD158 [ 2.106792] PM: Adding info for No Bus:ttyD159 [ 2.107335] PM: Adding info for No Bus:ttyD160 [ 2.107797] PM: Adding info for No Bus:ttyD161 [ 2.108333] PM: Adding info for No Bus:ttyD162 [ 2.108802] PM: Adding info for No Bus:ttyD163 [ 2.109334] PM: Adding info for No Bus:ttyD164 [ 2.109796] PM: Adding info for No Bus:ttyD165 [ 2.110350] PM: Adding info for No Bus:ttyD166 [ 2.110815] PM: Adding info for No Bus:ttyD167 [ 2.111340] PM: Adding info for No Bus:ttyD168 [ 2.111804] PM: Adding info for No Bus:ttyD169 [ 2.112342] PM: Adding info for No Bus:ttyD170 [ 2.112801] PM: Adding info for No Bus:ttyD171 [ 2.113345] PM: Adding info for No Bus:ttyD172 [ 2.113809] PM: Adding info for No Bus:ttyD173 [ 2.114340] PM: Adding info for No Bus:ttyD174 [ 2.114801] PM: Adding info for No Bus:ttyD175 [ 2.115338] PM: Adding info for No Bus:ttyD176 [ 2.115804] PM: Adding info for No Bus:ttyD177 [ 2.116346] PM: Adding info for No Bus:ttyD178 [ 2.116816] PM: Adding info for No Bus:ttyD179 [ 2.117344] PM: Adding info for No Bus:ttyD180 [ 2.117804] PM: Adding info for No Bus:ttyD181 [ 2.118349] PM: Adding info for No Bus:ttyD182 [ 2.118808] PM: Adding info for No Bus:ttyD183 [ 2.119341] PM: Adding info for No Bus:ttyD184 [ 2.119803] PM: Adding info for No Bus:ttyD185 [ 2.120342] PM: Adding info for No Bus:ttyD186 [ 2.120806] PM: Adding info for No Bus:ttyD187 [ 2.121342] PM: Adding info for No Bus:ttyD188 [ 2.121808] PM: Adding info for No Bus:ttyD189 [ 2.122347] PM: Adding info for No Bus:ttyD190 [ 2.122815] PM: Adding info for No Bus:ttyD191 [ 2.123345] PM: Adding info for No Bus:ttyD192 [ 2.123812] PM: Adding info for No Bus:ttyD193 [ 2.124342] PM: Adding info for No Bus:ttyD194 [ 2.124809] PM: Adding info for No Bus:ttyD195 [ 2.125342] PM: Adding info for No Bus:ttyD196 [ 2.125810] PM: Adding info for No Bus:ttyD197 [ 2.126342] PM: Adding info for No Bus:ttyD198 [ 2.126820] PM: Adding info for No Bus:ttyD199 [ 2.127342] PM: Adding info for No Bus:ttyD200 [ 2.127803] PM: Adding info for No Bus:ttyD201 [ 2.128349] PM: Adding info for No Bus:ttyD202 [ 2.128814] PM: Adding info for No Bus:ttyD203 [ 2.129344] PM: Adding info for No Bus:ttyD204 [ 2.129808] PM: Adding info for No Bus:ttyD205 [ 2.130343] PM: Adding info for No Bus:ttyD206 [ 2.130811] PM: Adding info for No Bus:ttyD207 [ 2.131342] PM: Adding info for No Bus:ttyD208 [ 2.131809] PM: Adding info for No Bus:ttyD209 [ 2.132347] PM: Adding info for No Bus:ttyD210 [ 2.132812] PM: Adding info for No Bus:ttyD211 [ 2.133345] PM: Adding info for No Bus:ttyD212 [ 2.133810] PM: Adding info for No Bus:ttyD213 [ 2.134349] PM: Adding info for No Bus:ttyD214 [ 2.134820] PM: Adding info for No Bus:ttyD215 [ 2.135340] PM: Adding info for No Bus:ttyD216 [ 2.135805] PM: Adding info for No Bus:ttyD217 [ 2.136342] PM: Adding info for No Bus:ttyD218 [ 2.136810] PM: Adding info for No Bus:ttyD219 [ 2.137346] PM: Adding info for No Bus:ttyD220 [ 2.137814] PM: Adding info for No Bus:ttyD221 [ 2.138350] PM: Adding info for No Bus:ttyD222 [ 2.138818] PM: Adding info for No Bus:ttyD223 [ 2.139345] PM: Adding info for No Bus:ttyD224 [ 2.139815] PM: Adding info for No Bus:ttyD225 [ 2.140349] PM: Adding info for No Bus:ttyD226 [ 2.140816] PM: Adding info for No Bus:ttyD227 [ 2.141346] PM: Adding info for No Bus:ttyD228 [ 2.141810] PM: Adding info for No Bus:ttyD229 [ 2.142344] PM: Adding info for No Bus:ttyD230 [ 2.142810] PM: Adding info for No Bus:ttyD231 [ 2.143343] PM: Adding info for No Bus:ttyD232 [ 2.143811] PM: Adding info for No Bus:ttyD233 [ 2.144346] PM: Adding info for No Bus:ttyD234 [ 2.144810] PM: Adding info for No Bus:ttyD235 [ 2.145346] PM: Adding info for No Bus:ttyD236 [ 2.145815] PM: Adding info for No Bus:ttyD237 [ 2.146351] PM: Adding info for No Bus:ttyD238 [ 2.146826] PM: Adding info for No Bus:ttyD239 [ 2.147347] PM: Adding info for No Bus:ttyD240 [ 2.147817] PM: Adding info for No Bus:ttyD241 [ 2.148350] PM: Adding info for No Bus:ttyD242 [ 2.148818] PM: Adding info for No Bus:ttyD243 [ 2.149346] PM: Adding info for No Bus:ttyD244 [ 2.149810] PM: Adding info for No Bus:ttyD245 [ 2.150348] PM: Adding info for No Bus:ttyD246 [ 2.150814] PM: Adding info for No Bus:ttyD247 [ 2.151348] PM: Adding info for No Bus:ttyD248 [ 2.151823] PM: Adding info for No Bus:ttyD249 [ 2.152343] PM: Adding info for No Bus:ttyD250 [ 2.152816] PM: Adding info for No Bus:ttyD251 [ 2.153346] PM: Adding info for No Bus:ttyD252 [ 2.153817] PM: Adding info for No Bus:ttyD253 [ 2.154350] PM: Adding info for No Bus:ttyD254 [ 2.154824] PM: Adding info for No Bus:ttyD255 [ 2.155358] PM: Adding info for No Bus:digi_ctl0 [ 2.155813] PM: Adding info for No Bus:digi_ctl1 [ 2.156334] PM: Adding info for No Bus:digi_ctl2 [ 2.156796] PM: Adding info for No Bus:digi_ctl3 [ 2.157337] PM: Adding info for No Bus:digi_ctl4 [ 2.157800] PM: Adding info for No Bus:digi_ctl5 [ 2.158332] PM: Adding info for No Bus:digi_ctl6 [ 2.158795] PM: Adding info for No Bus:digi_ctl7 [ 2.159329] PM: Adding info for No Bus:digi_ctl8 [ 2.159783] PM: Adding info for No Bus:digi_ctl9 [ 2.160335] PM: Adding info for No Bus:digi_ctl10 [ 2.160796] PM: Adding info for No Bus:digi_ctl11 [ 2.161460] PM: Adding info for No Bus:digi_ctl12 [ 2.161937] PM: Adding info for No Bus:digi_ctl13 [ 2.162441] PM: Adding info for No Bus:digi_ctl14 [ 2.162900] PM: Adding info for No Bus:digi_ctl15 [ 2.163387] PM: Adding info for No Bus:digi_ctl16 [ 2.163846] PM: Adding info for No Bus:digi_ctl17 [ 2.164347] PM: Adding info for No Bus:digi_ctl18 [ 2.164814] PM: Adding info for No Bus:digi_ctl19 [ 2.165340] PM: Adding info for No Bus:digi_ctl20 [ 2.165803] PM: Adding info for No Bus:digi_ctl21 [ 2.166335] PM: Adding info for No Bus:digi_ctl22 [ 2.166792] PM: Adding info for No Bus:digi_ctl23 [ 2.168071] PM: Adding info for No Bus:digi_ctl24 [ 2.168549] PM: Adding info for No Bus:digi_ctl25 [ 2.169011] PM: Adding info for No Bus:digi_ctl26 [ 2.169475] PM: Adding info for No Bus:digi_ctl27 [ 2.169942] PM: Adding info for No Bus:digi_ctl28 [ 2.170427] PM: Adding info for No Bus:digi_ctl29 [ 2.170888] PM: Adding info for No Bus:digi_ctl30 [ 2.171386] PM: Adding info for No Bus:digi_ctl31 [ 2.171841] PM: Adding info for No Bus:digi_ctl32 [ 2.172341] PM: Adding info for No Bus:digi_ctl33 [ 2.172798] PM: Adding info for No Bus:digi_ctl34 [ 2.173330] PM: Adding info for No Bus:digi_ctl35 [ 2.173792] PM: Adding info for No Bus:digi_ctl36 [ 2.174332] PM: Adding info for No Bus:digi_ctl37 [ 2.174792] PM: Adding info for No Bus:digi_ctl38 [ 2.175334] PM: Adding info for No Bus:digi_ctl39 [ 2.175793] PM: Adding info for No Bus:digi_ctl40 [ 2.176333] PM: Adding info for No Bus:digi_ctl41 [ 2.176794] PM: Adding info for No Bus:digi_ctl42 [ 2.177344] PM: Adding info for No Bus:digi_ctl43 [ 2.177815] PM: Adding info for No Bus:digi_ctl44 [ 2.178346] PM: Adding info for No Bus:digi_ctl45 [ 2.178808] PM: Adding info for No Bus:digi_ctl46 [ 2.179340] PM: Adding info for No Bus:digi_ctl47 [ 2.179803] PM: Adding info for No Bus:digi_ctl48 [ 2.180336] PM: Adding info for No Bus:digi_ctl49 [ 2.180790] PM: Adding info for No Bus:digi_ctl50 [ 2.181336] PM: Adding info for No Bus:digi_ctl51 [ 2.181800] PM: Adding info for No Bus:digi_ctl52 [ 2.182337] PM: Adding info for No Bus:digi_ctl53 [ 2.182800] PM: Adding info for No Bus:digi_ctl54 [ 2.183341] PM: Adding info for No Bus:digi_ctl55 [ 2.183801] PM: Adding info for No Bus:digi_ctl56 [ 2.184337] PM: Adding info for No Bus:digi_ctl57 [ 2.184801] PM: Adding info for No Bus:digi_ctl58 [ 2.185340] PM: Adding info for No Bus:digi_ctl59 [ 2.185802] PM: Adding info for No Bus:digi_ctl60 [ 2.186340] PM: Adding info for No Bus:digi_ctl61 [ 2.186803] PM: Adding info for No Bus:digi_ctl62 [ 2.187339] PM: Adding info for No Bus:digi_ctl63 [ 2.187804] PM: Adding info for No Bus:digi_ctl64 [ 2.188335] PM: Adding info for No Bus:digi_ctl65 [ 2.188793] PM: Adding info for No Bus:digi_ctl66 [ 2.189338] PM: Adding info for No Bus:digi_ctl67 [ 2.189809] PM: Adding info for No Bus:digi_ctl68 [ 2.190343] PM: Adding info for No Bus:digi_ctl69 [ 2.190806] PM: Adding info for No Bus:digi_ctl70 [ 2.191342] PM: Adding info for No Bus:digi_ctl71 [ 2.191811] PM: Adding info for No Bus:digi_ctl72 [ 2.192349] PM: Adding info for No Bus:digi_ctl73 [ 2.192810] PM: Adding info for No Bus:digi_ctl74 [ 2.193340] PM: Adding info for No Bus:digi_ctl75 [ 2.193799] PM: Adding info for No Bus:digi_ctl76 [ 2.194346] PM: Adding info for No Bus:digi_ctl77 [ 2.194812] PM: Adding info for No Bus:digi_ctl78 [ 2.195344] PM: Adding info for No Bus:digi_ctl79 [ 2.195819] PM: Adding info for No Bus:digi_ctl80 [ 2.196341] PM: Adding info for No Bus:digi_ctl81 [ 2.196802] PM: Adding info for No Bus:digi_ctl82 [ 2.197339] PM: Adding info for No Bus:digi_ctl83 [ 2.197801] PM: Adding info for No Bus:digi_ctl84 [ 2.198340] PM: Adding info for No Bus:digi_ctl85 [ 2.198801] PM: Adding info for No Bus:digi_ctl86 [ 2.199339] PM: Adding info for No Bus:digi_ctl87 [ 2.199808] PM: Adding info for No Bus:digi_ctl88 [ 2.200340] PM: Adding info for No Bus:digi_ctl89 [ 2.200806] PM: Adding info for No Bus:digi_ctl90 [ 2.201340] PM: Adding info for No Bus:digi_ctl91 [ 2.201814] PM: Adding info for No Bus:digi_ctl92 [ 2.202343] PM: Adding info for No Bus:digi_ctl93 [ 2.202819] PM: Adding info for No Bus:digi_ctl94 [ 2.203348] PM: Adding info for No Bus:digi_ctl95 [ 2.203811] PM: Adding info for No Bus:digi_ctl96 [ 2.204344] PM: Adding info for No Bus:digi_ctl97 [ 2.204813] PM: Adding info for No Bus:digi_ctl98 [ 2.205350] PM: Adding info for No Bus:digi_ctl99 [ 2.205823] PM: Adding info for No Bus:digi_ctl100 [ 2.206342] PM: Adding info for No Bus:digi_ctl101 [ 2.206808] PM: Adding info for No Bus:digi_ctl102 [ 2.207344] PM: Adding info for No Bus:digi_ctl103 [ 2.207818] PM: Adding info for No Bus:digi_ctl104 [ 2.208343] PM: Adding info for No Bus:digi_ctl105 [ 2.208812] PM: Adding info for No Bus:digi_ctl106 [ 2.209348] PM: Adding info for No Bus:digi_ctl107 [ 2.209816] PM: Adding info for No Bus:digi_ctl108 [ 2.210362] PM: Adding info for No Bus:digi_ctl109 [ 2.210833] PM: Adding info for No Bus:digi_ctl110 [ 2.211350] PM: Adding info for No Bus:digi_ctl111 [ 2.211820] PM: Adding info for No Bus:digi_ctl112 [ 2.212346] PM: Adding info for No Bus:digi_ctl113 [ 2.212812] PM: Adding info for No Bus:digi_ctl114 [ 2.213348] PM: Adding info for No Bus:digi_ctl115 [ 2.213823] PM: Adding info for No Bus:digi_ctl116 [ 2.214347] PM: Adding info for No Bus:digi_ctl117 [ 2.214815] PM: Adding info for No Bus:digi_ctl118 [ 2.215352] PM: Adding info for No Bus:digi_ctl119 [ 2.215822] PM: Adding info for No Bus:digi_ctl120 [ 2.216350] PM: Adding info for No Bus:digi_ctl121 [ 2.216820] PM: Adding info for No Bus:digi_ctl122 [ 2.217348] PM: Adding info for No Bus:digi_ctl123 [ 2.217817] PM: Adding info for No Bus:digi_ctl124 [ 2.218349] PM: Adding info for No Bus:digi_ctl125 [ 2.218818] PM: Adding info for No Bus:digi_ctl126 [ 2.219353] PM: Adding info for No Bus:digi_ctl127 [ 2.219830] PM: Adding info for No Bus:digi_ctl128 [ 2.220346] PM: Adding info for No Bus:digi_ctl129 [ 2.220816] PM: Adding info for No Bus:digi_ctl130 [ 2.221348] PM: Adding info for No Bus:digi_ctl131 [ 2.221820] PM: Adding info for No Bus:digi_ctl132 [ 2.222352] PM: Adding info for No Bus:digi_ctl133 [ 2.222822] PM: Adding info for No Bus:digi_ctl134 [ 2.223348] PM: Adding info for No Bus:digi_ctl135 [ 2.223816] PM: Adding info for No Bus:digi_ctl136 [ 2.224351] PM: Adding info for No Bus:digi_ctl137 [ 2.224821] PM: Adding info for No Bus:digi_ctl138 [ 2.225355] PM: Adding info for No Bus:digi_ctl139 [ 2.225835] PM: Adding info for No Bus:digi_ctl140 [ 2.226352] PM: Adding info for No Bus:digi_ctl141 [ 2.226819] PM: Adding info for No Bus:digi_ctl142 [ 2.227351] PM: Adding info for No Bus:digi_ctl143 [ 2.227831] PM: Adding info for No Bus:digi_ctl144 [ 2.228355] PM: Adding info for No Bus:digi_ctl145 [ 2.228824] PM: Adding info for No Bus:digi_ctl146 [ 2.229355] PM: Adding info for No Bus:digi_ctl147 [ 2.229825] PM: Adding info for No Bus:digi_ctl148 [ 2.230351] PM: Adding info for No Bus:digi_ctl149 [ 2.230829] PM: Adding info for No Bus:digi_ctl150 [ 2.231349] PM: Adding info for No Bus:digi_ctl151 [ 2.231817] PM: Adding info for No Bus:digi_ctl152 [ 2.232355] PM: Adding info for No Bus:digi_ctl153 [ 2.232946] PM: Adding info for No Bus:digi_ctl154 [ 2.233466] PM: Adding info for No Bus:digi_ctl155 [ 2.233949] PM: Adding info for No Bus:digi_ctl156 [ 2.234448] PM: Adding info for No Bus:digi_ctl157 [ 2.234926] PM: Adding info for No Bus:digi_ctl158 [ 2.235432] PM: Adding info for No Bus:digi_ctl159 [ 2.235901] PM: Adding info for No Bus:digi_ctl160 [ 2.236406] PM: Adding info for No Bus:digi_ctl161 [ 2.236882] PM: Adding info for No Bus:digi_ctl162 [ 2.237380] PM: Adding info for No Bus:digi_ctl163 [ 2.237857] PM: Adding info for No Bus:digi_ctl164 [ 2.238362] PM: Adding info for No Bus:digi_ctl165 [ 2.238828] PM: Adding info for No Bus:digi_ctl166 [ 2.239356] PM: Adding info for No Bus:digi_ctl167 [ 2.239830] PM: Adding info for No Bus:digi_ctl168 [ 2.240357] PM: Adding info for No Bus:digi_ctl169 [ 2.240832] PM: Adding info for No Bus:digi_ctl170 [ 2.241352] PM: Adding info for No Bus:digi_ctl171 [ 2.241825] PM: Adding info for No Bus:digi_ctl172 [ 2.242352] PM: Adding info for No Bus:digi_ctl173 [ 2.242826] PM: Adding info for No Bus:digi_ctl174 [ 2.243357] PM: Adding info for No Bus:digi_ctl175 [ 2.243836] PM: Adding info for No Bus:digi_ctl176 [ 2.244366] PM: Adding info for No Bus:digi_ctl177 [ 2.244847] PM: Adding info for No Bus:digi_ctl178 [ 2.245359] PM: Adding info for No Bus:digi_ctl179 [ 2.245836] PM: Adding info for No Bus:digi_ctl180 [ 2.246356] PM: Adding info for No Bus:digi_ctl181 [ 2.246827] PM: Adding info for No Bus:digi_ctl182 [ 2.247353] PM: Adding info for No Bus:digi_ctl183 [ 2.247823] PM: Adding info for No Bus:digi_ctl184 [ 2.248352] PM: Adding info for No Bus:digi_ctl185 [ 2.248827] PM: Adding info for No Bus:digi_ctl186 [ 2.249357] PM: Adding info for No Bus:digi_ctl187 [ 2.249831] PM: Adding info for No Bus:digi_ctl188 [ 2.250359] PM: Adding info for No Bus:digi_ctl189 [ 2.250829] PM: Adding info for No Bus:digi_ctl190 [ 2.251356] PM: Adding info for No Bus:digi_ctl191 [ 2.251834] PM: Adding info for No Bus:digi_ctl192 [ 2.252355] PM: Adding info for No Bus:digi_ctl193 [ 2.252826] PM: Adding info for No Bus:digi_ctl194 [ 2.253360] PM: Adding info for No Bus:digi_ctl195 [ 2.253832] PM: Adding info for No Bus:digi_ctl196 [ 2.254358] PM: Adding info for No Bus:digi_ctl197 [ 2.254835] PM: Adding info for No Bus:digi_ctl198 [ 2.255357] PM: Adding info for No Bus:digi_ctl199 [ 2.255836] PM: Adding info for No Bus:digi_ctl200 [ 2.256364] PM: Adding info for No Bus:digi_ctl201 [ 2.256835] PM: Adding info for No Bus:digi_ctl202 [ 2.257352] PM: Adding info for No Bus:digi_ctl203 [ 2.258612] PM: Adding info for No Bus:digi_ctl204 [ 2.259087] PM: Adding info for No Bus:digi_ctl205 [ 2.259585] PM: Adding info for No Bus:digi_ctl206 [ 2.260072] PM: Adding info for No Bus:digi_ctl207 [ 2.260563] PM: Adding info for No Bus:digi_ctl208 [ 2.261044] PM: Adding info for No Bus:digi_ctl209 [ 2.261538] PM: Adding info for No Bus:digi_ctl210 [ 2.262014] PM: Adding info for No Bus:digi_ctl211 [ 2.262494] PM: Adding info for No Bus:digi_ctl212 [ 2.262989] PM: Adding info for No Bus:digi_ctl213 [ 2.263470] PM: Adding info for No Bus:digi_ctl214 [ 2.263944] PM: Adding info for No Bus:digi_ctl215 [ 2.264446] PM: Adding info for No Bus:digi_ctl216 [ 2.264917] PM: Adding info for No Bus:digi_ctl217 [ 2.265419] PM: Adding info for No Bus:digi_ctl218 [ 2.265904] PM: Adding info for No Bus:digi_ctl219 [ 2.266406] PM: Adding info for No Bus:digi_ctl220 [ 2.266879] PM: Adding info for No Bus:digi_ctl221 [ 2.267383] PM: Adding info for No Bus:digi_ctl222 [ 2.267858] PM: Adding info for No Bus:digi_ctl223 [ 2.268362] PM: Adding info for No Bus:digi_ctl224 [ 2.268845] PM: Adding info for No Bus:digi_ctl225 [ 2.269357] PM: Adding info for No Bus:digi_ctl226 [ 2.269840] PM: Adding info for No Bus:digi_ctl227 [ 2.270359] PM: Adding info for No Bus:digi_ctl228 [ 2.270836] PM: Adding info for No Bus:digi_ctl229 [ 2.271358] PM: Adding info for No Bus:digi_ctl230 [ 2.271850] PM: Adding info for No Bus:digi_ctl231 [ 2.272359] PM: Adding info for No Bus:digi_ctl232 [ 2.272835] PM: Adding info for No Bus:digi_ctl233 [ 2.273361] PM: Adding info for No Bus:digi_ctl234 [ 2.273839] PM: Adding info for No Bus:digi_ctl235 [ 2.274357] PM: Adding info for No Bus:digi_ctl236 [ 2.274834] PM: Adding info for No Bus:digi_ctl237 [ 2.275364] PM: Adding info for No Bus:digi_ctl238 [ 2.275843] PM: Adding info for No Bus:digi_ctl239 [ 2.276366] PM: Adding info for No Bus:digi_ctl240 [ 2.276846] PM: Adding info for No Bus:digi_ctl241 [ 2.277363] PM: Adding info for No Bus:digi_ctl242 [ 2.277848] PM: Adding info for No Bus:digi_ctl243 [ 2.278369] PM: Adding info for No Bus:digi_ctl244 [ 2.278848] PM: Adding info for No Bus:digi_ctl245 [ 2.279360] PM: Adding info for No Bus:digi_ctl246 [ 2.279848] PM: Adding info for No Bus:digi_ctl247 [ 2.280362] PM: Adding info for No Bus:digi_ctl248 [ 2.280842] PM: Adding info for No Bus:digi_ctl249 [ 2.281367] PM: Adding info for No Bus:digi_ctl250 [ 2.281848] PM: Adding info for No Bus:digi_ctl251 [ 2.282361] PM: Adding info for No Bus:digi_ctl252 [ 2.282844] PM: Adding info for No Bus:digi_ctl253 [ 2.283363] PM: Adding info for No Bus:digi_ctl254 [ 2.283844] PM: Adding info for No Bus:digi_ctl255 [ 2.284182] initcall epca_module_init+0x0/0x480 returned 0 after 250716 usecs [ 2.284293] calling riscom8_init_module+0x0/0x420 @ 1 [ 2.284384] rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996. [ 2.284674] PM: Adding info for No Bus:ttyL0 [ 2.285161] PM: Adding info for No Bus:ttyL1 [ 2.285655] PM: Adding info for No Bus:ttyL2 [ 2.286146] PM: Adding info for No Bus:ttyL3 [ 2.286648] PM: Adding info for No Bus:ttyL4 [ 2.287131] PM: Adding info for No Bus:ttyL5 [ 2.287630] PM: Adding info for No Bus:ttyL6 [ 2.288115] PM: Adding info for No Bus:ttyL7 [ 2.288610] PM: Adding info for No Bus:ttyL8 [ 2.289112] PM: Adding info for No Bus:ttyL9 [ 2.289609] PM: Adding info for No Bus:ttyL10 [ 2.290100] PM: Adding info for No Bus:ttyL11 [ 2.290594] PM: Adding info for No Bus:ttyL12 [ 2.291078] PM: Adding info for No Bus:ttyL13 [ 2.291574] PM: Adding info for No Bus:ttyL14 [ 2.292067] PM: Adding info for No Bus:ttyL15 [ 2.292567] PM: Adding info for No Bus:ttyL16 [ 2.293059] PM: Adding info for No Bus:ttyL17 [ 2.293563] PM: Adding info for No Bus:ttyL18 [ 2.294055] PM: Adding info for No Bus:ttyL19 [ 2.294556] PM: Adding info for No Bus:ttyL20 [ 2.295042] PM: Adding info for No Bus:ttyL21 [ 2.295543] PM: Adding info for No Bus:ttyL22 [ 2.296023] PM: Adding info for No Bus:ttyL23 [ 2.296520] PM: Adding info for No Bus:ttyL24 [ 2.297007] PM: Adding info for No Bus:ttyL25 [ 2.297497] PM: Adding info for No Bus:ttyL26 [ 2.297987] PM: Adding info for No Bus:ttyL27 [ 2.298475] PM: Adding info for No Bus:ttyL28 [ 2.298958] PM: Adding info for No Bus:ttyL29 [ 2.299471] PM: Adding info for No Bus:ttyL30 [ 2.299955] PM: Adding info for No Bus:ttyL31 [ 2.300362] rc0: RISCom/8 Board at 0x220 not found. [ 2.300538] rc1: RISCom/8 Board at 0x240 not found. [ 2.300713] rc2: RISCom/8 Board at 0x250 not found. [ 2.300890] rc3: RISCom/8 Board at 0x260 not found. [ 2.301485] PM: Removing info for No Bus:ttyL0 [ 2.302231] PM: Removing info for No Bus:ttyL1 [ 2.302977] PM: Removing info for No Bus:ttyL2 [ 2.303723] PM: Removing info for No Bus:ttyL3 [ 2.304522] PM: Removing info for No Bus:ttyL4 [ 2.305271] PM: Removing info for No Bus:ttyL5 [ 2.305988] PM: Removing info for No Bus:ttyL6 [ 2.306734] PM: Removing info for No Bus:ttyL7 [ 2.307576] PM: Removing info for No Bus:ttyL8 [ 2.308313] PM: Removing info for No Bus:ttyL9 [ 2.309031] PM: Removing info for No Bus:ttyL10 [ 2.309784] PM: Removing info for No Bus:ttyL11 [ 2.310551] PM: Removing info for No Bus:ttyL12 [ 2.311297] PM: Removing info for No Bus:ttyL13 [ 2.312010] PM: Removing info for No Bus:ttyL14 [ 2.312745] PM: Removing info for No Bus:ttyL15 [ 2.313545] PM: Removing info for No Bus:ttyL16 [ 2.314285] PM: Removing info for No Bus:ttyL17 [ 2.315001] PM: Removing info for No Bus:ttyL18 [ 2.315737] PM: Removing info for No Bus:ttyL19 [ 2.316542] PM: Removing info for No Bus:ttyL20 [ 2.317285] PM: Removing info for No Bus:ttyL21 [ 2.317998] PM: Removing info for No Bus:ttyL22 [ 2.318735] PM: Removing info for No Bus:ttyL23 [ 2.319549] PM: Removing info for No Bus:ttyL24 [ 2.320293] PM: Removing info for No Bus:ttyL25 [ 2.321007] PM: Removing info for No Bus:ttyL26 [ 2.321757] PM: Removing info for No Bus:ttyL27 [ 2.322555] PM: Removing info for No Bus:ttyL28 [ 2.323300] PM: Removing info for No Bus:ttyL29 [ 2.324017] PM: Removing info for No Bus:ttyL30 [ 2.324762] PM: Removing info for No Bus:ttyL31 [ 2.325203] rc: No RISCom/8 boards detected. [ 2.325322] initcall riscom8_init_module+0x0/0x420 returned -5 after 39973 usecs [ 2.325453] initcall riscom8_init_module+0x0/0x420 returned with error code -5 [ 2.325583] calling n_hdlc_init+0x0/0xb0 @ 1 [ 2.325672] HDLC line discipline maxframe=4096 [ 2.325760] N_HDLC line discipline registered. [ 2.325849] initcall n_hdlc_init+0x0/0xb0 returned 0 after 171 usecs [ 2.325942] calling rio_init+0x0/0x11f0 @ 1 [ 2.326180] PM: Adding info for No Bus:rioctl [ 2.329197] PM: Removing info for No Bus:rioctl [ 2.329662] initcall rio_init+0x0/0x11f0 returned -5 after 3533 usecs [ 2.329756] initcall rio_init+0x0/0x11f0 returned with error code -5 [ 2.329849] calling r3964_init+0x0/0x40 @ 1 [ 2.329937] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 2.330035] initcall r3964_init+0x0/0x40 returned 0 after 94 usecs [ 2.330127] calling nvram_init+0x0/0x90 @ 1 [ 2.330370] PM: Adding info for No Bus:nvram [ 2.330696] Non-volatile memory driver v1.3 [ 2.330789] initcall nvram_init+0x0/0x90 returned 0 after 556 usecs [ 2.330881] calling scx200_gpio_init+0x0/0x140 @ 1 [ 2.330970] scx200_gpio: no SCx200 gpio present [ 2.331070] initcall scx200_gpio_init+0x0/0x140 returned -19 after 96 usecs [ 2.331165] calling nsc_gpio_init+0x0/0x20 @ 1 [ 2.331273] nsc_gpio initializing [ 2.331362] initcall nsc_gpio_init+0x0/0x20 returned 0 after 85 usecs [ 2.331454] calling cs5535_gpio_init+0x0/0x1d0 @ 1 [ 2.331556] cs5535_gpio: DIVIL not found [ 2.331646] initcall cs5535_gpio_init+0x0/0x1d0 returned -19 after 100 usecs [ 2.331740] calling mwave_init+0x0/0x350 @ 1 [ 2.332493] smapi::smapi_query_DSP_cfg: Error: Could not get DSP modem settings. Aborting. [ 2.332624] mwave: tp3780i::tp3780I_CalcResources: Error: Could not query DSP config. Aborting. [ 2.332755] mwave: mwavedd:mwave_init: Error: Failed to calculate resources [ 2.332847] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 2.332941] initcall mwave_init+0x0/0x350 returned -5 after 1084 usecs [ 2.333038] initcall mwave_init+0x0/0x350 returned with error code -5 [ 2.333131] calling ipmi_init_msghandler_mod+0x0/0x10 @ 1 [ 2.333491] ipmi message handler version 39.2 [ 2.333604] initcall ipmi_init_msghandler_mod+0x0/0x10 returned 0 after 369 usecs [ 2.333734] calling init_ipmi_devintf+0x0/0x100 @ 1 [ 2.333823] ipmi device interface [ 2.334172] initcall init_ipmi_devintf+0x0/0x100 returned 0 after 338 usecs [ 2.334283] calling init_ipmi_si+0x0/0x990 @ 1 [ 2.334631] IPMI System Interface driver. [ 2.343766] ipmi_si: Unable to find any System Interface(s) [ 2.343861] initcall init_ipmi_si+0x0/0x990 returned -19 after 9264 usecs [ 2.343954] calling hangcheck_init+0x0/0xe0 @ 1 [ 2.344053] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 2.344183] Hangcheck: Using get_cycles(). [ 2.344289] initcall hangcheck_init+0x0/0xe0 returned 0 after 228 usecs [ 2.344381] calling serial8250_init+0x0/0x170 @ 1 [ 2.344470] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.345519] PM: Adding info for platform:serial8250 [ 2.346174] PM: Adding info for No Bus:ttyS0 [ 2.346625] async_waiting @ 1 [ 2.346714] async_continuing @ 1 after 2 usec [ 2.470050] async_waiting @ 1 [ 2.470139] async_continuing @ 1 after 1 usec [ 2.593101] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 2.593458] PM: Adding info for No Bus:ttyS1 [ 2.594043] PM: Adding info for No Bus:ttyS2 [ 2.594639] PM: Adding info for No Bus:ttyS3 [ 2.595290] initcall serial8250_init+0x0/0x170 returned 0 after 244937 usecs [ 2.595384] calling serial8250_pnp_init+0x0/0x10 @ 1 [ 2.595952] initcall serial8250_pnp_init+0x0/0x10 returned 0 after 466 usecs [ 2.596053] calling serial8250_pci_init+0x0/0x20 @ 1 [ 2.596464] initcall serial8250_pci_init+0x0/0x20 returned 0 after 309 usecs [ 2.596557] calling fourport_init+0x0/0x10 @ 1 [ 2.596756] PM: Adding info for platform:serial8250.3 [ 2.597607] PM: Removing info for No Bus:ttyS0 [ 2.598462] PM: Adding info for No Bus:ttyS0 [ 2.599175] PM: Removing info for No Bus:ttyS0 [ 2.599981] PM: Adding info for No Bus:ttyS0 [ 2.600731] PM: Removing info for No Bus:ttyS0 [ 2.601563] PM: Adding info for No Bus:ttyS0 [ 2.602299] PM: Removing info for No Bus:ttyS0 [ 2.603078] PM: Adding info for No Bus:ttyS0 [ 2.603790] PM: Removing info for No Bus:ttyS0 [ 2.604606] PM: Adding info for No Bus:ttyS0 [ 2.605330] PM: Removing info for No Bus:ttyS0 [ 2.606112] PM: Adding info for No Bus:ttyS0 [ 2.606827] PM: Removing info for No Bus:ttyS0 [ 2.607635] PM: Adding info for No Bus:ttyS0 [ 2.608357] PM: Removing info for No Bus:ttyS0 [ 2.609142] PM: Adding info for No Bus:ttyS0 [ 2.609519] initcall fourport_init+0x0/0x10 returned 0 after 12566 usecs [ 2.609613] calling boca_init+0x0/0x10 @ 1 [ 2.609807] PM: Adding info for platform:serial8250.5 [ 2.610563] PM: Removing info for No Bus:ttyS0 [ 2.611372] PM: Adding info for No Bus:ttyS0 [ 2.612074] PM: Removing info for No Bus:ttyS0 [ 2.612875] PM: Adding info for No Bus:ttyS0 [ 2.613602] PM: Removing info for No Bus:ttyS0 [ 2.614465] PM: Adding info for No Bus:ttyS0 [ 2.615174] PM: Removing info for No Bus:ttyS0 [ 2.615975] PM: Adding info for No Bus:ttyS0 [ 2.616704] PM: Removing info for No Bus:ttyS0 [ 2.617569] PM: Adding info for No Bus:ttyS0 [ 2.618288] PM: Removing info for No Bus:ttyS0 [ 2.619074] PM: Adding info for No Bus:ttyS0 [ 2.619803] PM: Removing info for No Bus:ttyS0 [ 2.620615] PM: Adding info for No Bus:ttyS0 [ 2.621340] PM: Removing info for No Bus:ttyS0 [ 2.622121] PM: Adding info for No Bus:ttyS0 [ 2.622832] PM: Removing info for No Bus:ttyS0 [ 2.623636] PM: Adding info for No Bus:ttyS0 [ 2.624358] PM: Removing info for No Bus:ttyS0 [ 2.625139] PM: Adding info for No Bus:ttyS0 [ 2.625852] PM: Removing info for No Bus:ttyS0 [ 2.626653] PM: Adding info for No Bus:ttyS0 [ 2.627371] PM: Removing info for No Bus:ttyS0 [ 2.628157] PM: Adding info for No Bus:ttyS0 [ 2.628868] PM: Removing info for No Bus:ttyS0 [ 2.629670] PM: Adding info for No Bus:ttyS0 [ 2.630488] PM: Removing info for No Bus:ttyS0 [ 2.631293] PM: Adding info for No Bus:ttyS0 [ 2.631989] PM: Removing info for No Bus:ttyS0 [ 2.632827] PM: Adding info for No Bus:ttyS0 [ 2.633846] PM: Removing info for No Bus:ttyS0 [ 2.634642] PM: Adding info for No Bus:ttyS0 [ 2.635000] initcall boca_init+0x0/0x10 returned 0 after 24702 usecs [ 2.635095] calling hub6_init+0x0/0x10 @ 1 [ 2.635320] PM: Adding info for platform:serial8250.7 [ 2.635993] PM: Removing info for No Bus:ttyS0 [ 2.636821] PM: Adding info for No Bus:ttyS0 [ 2.637563] PM: Removing info for No Bus:ttyS0 [ 2.638373] PM: Adding info for No Bus:ttyS0 [ 2.639073] PM: Removing info for No Bus:ttyS0 [ 2.639881] PM: Adding info for No Bus:ttyS0 [ 2.640607] PM: Removing info for No Bus:ttyS0 [ 2.641418] PM: Adding info for No Bus:ttyS0 [ 2.642129] PM: Removing info for No Bus:ttyS0 [ 2.642939] PM: Adding info for No Bus:ttyS0 [ 2.643648] PM: Removing info for No Bus:ttyS0 [ 2.644558] PM: Adding info for No Bus:ttyS0 [ 2.645282] PM: Removing info for No Bus:ttyS0 [ 2.646073] PM: Adding info for No Bus:ttyS0 [ 2.646825] PM: Removing info for No Bus:ttyS0 [ 2.647639] PM: Adding info for No Bus:ttyS0 [ 2.648370] PM: Removing info for No Bus:ttyS0 [ 2.649156] PM: Adding info for No Bus:ttyS0 [ 2.649869] PM: Removing info for No Bus:ttyS0 [ 2.650677] PM: Adding info for No Bus:ttyS0 [ 2.651440] PM: Removing info for No Bus:ttyS0 [ 2.652236] PM: Adding info for No Bus:ttyS0 [ 2.652945] PM: Removing info for No Bus:ttyS0 [ 2.653764] PM: Adding info for No Bus:ttyS0 [ 2.654160] initcall hub6_init+0x0/0x10 returned 0 after 18527 usecs [ 2.654298] calling isa_bus_init+0x0/0x40 @ 1 [ 2.654724] PM: Adding info for No Bus:isa [ 2.654816] initcall isa_bus_init+0x0/0x40 returned 0 after 418 usecs [ 2.654910] calling topology_sysfs_init+0x0/0x50 @ 1 [ 2.655107] initcall topology_sysfs_init+0x0/0x50 returned 0 after 101 usecs [ 2.655201] calling floppy_init+0x0/0xe80 @ 1 [ 5.666280] floppy0: no floppy controllers found [ 5.666711] initcall floppy_init+0x0/0xe80 returned -19 after 2940818 usecs [ 5.666804] calling brd_init+0x0/0x1a0 @ 1 [ 5.667600] PM: Adding info for No Bus:ram0 [ 5.668179] PM: Adding info for No Bus:1:0 [ 5.668738] PM: Adding info for No Bus:ram1 [ 5.669350] PM: Adding info for No Bus:1:1 [ 5.669865] PM: Adding info for No Bus:ram2 [ 5.670452] PM: Adding info for No Bus:1:2 [ 5.670954] PM: Adding info for No Bus:ram3 [ 5.671669] PM: Adding info for No Bus:1:3 [ 5.672204] PM: Adding info for No Bus:ram4 [ 5.672812] PM: Adding info for No Bus:1:4 [ 5.673328] PM: Adding info for No Bus:ram5 [ 5.673906] PM: Adding info for No Bus:1:5 [ 5.674445] PM: Adding info for No Bus:ram6 [ 5.675015] PM: Adding info for No Bus:1:6 [ 5.675524] PM: Adding info for No Bus:ram7 [ 5.676103] PM: Adding info for No Bus:1:7 [ 5.676630] PM: Adding info for No Bus:ram8 [ 5.677207] PM: Adding info for No Bus:1:8 [ 5.677724] PM: Adding info for No Bus:ram9 [ 5.678389] PM: Adding info for No Bus:1:9 [ 5.678898] PM: Adding info for No Bus:ram10 [ 5.679495] PM: Adding info for No Bus:1:10 [ 5.680006] PM: Adding info for No Bus:ram11 [ 5.680599] PM: Adding info for No Bus:1:11 [ 5.681116] PM: Adding info for No Bus:ram12 [ 5.681731] PM: Adding info for No Bus:1:12 [ 5.682283] PM: Adding info for No Bus:ram13 [ 5.682877] PM: Adding info for No Bus:1:13 [ 5.683404] PM: Adding info for No Bus:ram14 [ 5.683983] PM: Adding info for No Bus:1:14 [ 5.684498] PM: Adding info for No Bus:ram15 [ 5.685085] PM: Adding info for No Bus:1:15 [ 5.685480] brd: module loaded [ 5.685571] initcall brd_init+0x0/0x1a0 returned 0 after 18235 usecs [ 5.685663] calling loop_init+0x0/0x1b0 @ 1 [ 5.686216] PM: Adding info for No Bus:loop0 [ 5.686813] PM: Adding info for No Bus:7:0 [ 5.687343] PM: Adding info for No Bus:loop1 [ 5.687918] PM: Adding info for No Bus:7:1 [ 5.688455] PM: Adding info for No Bus:loop2 [ 5.689024] PM: Adding info for No Bus:7:2 [ 5.689553] PM: Adding info for No Bus:loop3 [ 5.690135] PM: Adding info for No Bus:7:3 [ 5.690657] PM: Adding info for No Bus:loop4 [ 5.691235] PM: Adding info for No Bus:7:4 [ 5.691761] PM: Adding info for No Bus:loop5 [ 5.692364] PM: Adding info for No Bus:7:5 [ 5.692878] PM: Adding info for No Bus:loop6 [ 5.693475] PM: Adding info for No Bus:7:6 [ 5.693976] PM: Adding info for No Bus:loop7 [ 5.694618] PM: Adding info for No Bus:7:7 [ 5.694968] loop: module loaded [ 5.695068] initcall loop_init+0x0/0x1b0 returned 0 after 9095 usecs [ 5.695163] calling cpqarray_init+0x0/0x2c0 @ 1 [ 5.695268] Compaq SMART2 Driver (v 2.6.0) [ 5.695891] initcall cpqarray_init+0x0/0x2c0 returned -19 after 606 usecs [ 5.695985] calling mm_init+0x0/0x1a0 @ 1 [ 5.696441] MM: desc_per_page = 128 [ 5.696531] initcall mm_init+0x0/0x1a0 returned 0 after 441 usecs [ 5.696623] calling nbd_init+0x0/0x330 @ 1 [ 5.698013] nbd: registered device at major 43 [ 5.698277] PM: Adding info for No Bus:nbd0 [ 5.698891] PM: Adding info for No Bus:43:0 [ 5.699425] PM: Adding info for No Bus:nbd1 [ 5.700018] PM: Adding info for No Bus:43:1 [ 5.700556] PM: Adding info for No Bus:nbd2 [ 5.701169] PM: Adding info for No Bus:43:2 [ 5.701703] PM: Adding info for No Bus:nbd3 [ 5.702509] PM: Adding info for No Bus:43:3 [ 5.703037] PM: Adding info for No Bus:nbd4 [ 5.703651] PM: Adding info for No Bus:43:4 [ 5.704174] PM: Adding info for No Bus:nbd5 [ 5.704791] PM: Adding info for No Bus:43:5 [ 5.705348] PM: Adding info for No Bus:nbd6 [ 5.705945] PM: Adding info for No Bus:43:6 [ 5.707332] PM: Adding info for No Bus:nbd7 [ 5.707936] PM: Adding info for No Bus:43:7 [ 5.708469] PM: Adding info for No Bus:nbd8 [ 5.709077] PM: Adding info for No Bus:43:8 [ 5.709600] PM: Adding info for No Bus:nbd9 [ 5.710207] PM: Adding info for No Bus:43:9 [ 5.710757] PM: Adding info for No Bus:nbd10 [ 5.711374] PM: Adding info for No Bus:43:10 [ 5.711893] PM: Adding info for No Bus:nbd11 [ 5.712522] PM: Adding info for No Bus:43:11 [ 5.713039] PM: Adding info for No Bus:nbd12 [ 5.713654] PM: Adding info for No Bus:43:12 [ 5.714178] PM: Adding info for No Bus:nbd13 [ 5.714803] PM: Adding info for No Bus:43:13 [ 5.715381] PM: Adding info for No Bus:nbd14 [ 5.715979] PM: Adding info for No Bus:43:14 [ 5.716494] PM: Adding info for No Bus:nbd15 [ 5.717104] PM: Adding info for No Bus:43:15 [ 5.717466] initcall nbd_init+0x0/0x330 returned 0 after 20264 usecs [ 5.717560] calling lkdtm_module_init+0x0/0x210 @ 1 [ 5.717649] lkdtm : Invalid command [ 5.717737] initcall lkdtm_module_init+0x0/0x210 returned -22 after 84 usecs [ 5.717831] initcall lkdtm_module_init+0x0/0x210 returned with error code -22 [ 5.717960] calling sm501_base_init+0x0/0x20 @ 1 [ 5.718614] initcall sm501_base_init+0x0/0x20 returned 0 after 538 usecs [ 5.718707] calling pasic3_base_init+0x0/0x20 @ 1 [ 5.719401] initcall pasic3_base_init+0x0/0x20 returned -19 after 586 usecs [ 5.719495] calling mac_hid_init+0x0/0xd0 @ 1 [ 5.719810] PM: Adding info for No Bus:input0 [ 5.720142] input: Macintosh mouse button emulation as /class/input/input0 [ 5.720303] initcall mac_hid_init+0x0/0xd0 returned 0 after 699 usecs [ 5.720395] calling raid_init+0x0/0x10 @ 1 [ 5.720724] initcall raid_init+0x0/0x10 returned 0 after 232 usecs [ 5.720816] calling spi_transport_init+0x0/0x90 @ 1 [ 5.721422] initcall spi_transport_init+0x0/0x90 returned 0 after 500 usecs [ 5.721515] calling iscsi_transport_init+0x0/0x140 @ 1 [ 5.721606] Loading iSCSI transport class v2.0-870. [ 5.723000] initcall iscsi_transport_init+0x0/0x140 returned 0 after 1359 usecs [ 5.723134] calling ahc_linux_init+0x0/0x70 @ 1 [ 5.723850] initcall ahc_linux_init+0x0/0x70 returned 0 after 608 usecs [ 5.723943] calling init_sd+0x0/0xe0 @ 1 [ 5.724630] initcall init_sd+0x0/0xe0 returned 0 after 575 usecs [ 5.724722] calling init_sr+0x0/0x50 @ 1 [ 5.725176] initcall init_sr+0x0/0x50 returned 0 after 355 usecs [ 5.725287] calling init_sg+0x0/0xc0 @ 1 [ 5.725630] initcall init_sg+0x0/0xc0 returned 0 after 247 usecs [ 5.725723] calling ahci_init+0x0/0x20 @ 1 [ 5.725967] ahci 0000:00:1f.2: version 3.0 [ 5.726187] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 5.726424] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 5.726644] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 5.726775] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 5.726872] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.727310] scsi0 : ahci [ 5.727561] PM: Adding info for No Bus:host0 [ 5.727917] PM: Adding info for No Bus:host0 [ 5.728506] scsi1 : ahci [ 5.728677] PM: Adding info for No Bus:host1 [ 5.729052] PM: Adding info for No Bus:host1 [ 5.729557] scsi2 : ahci [ 5.729724] PM: Adding info for No Bus:host2 [ 5.730186] PM: Adding info for No Bus:host2 [ 5.730642] scsi3 : ahci [ 5.730810] PM: Adding info for No Bus:host3 [ 5.731209] PM: Adding info for No Bus:host3 [ 5.731578] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 28 [ 5.731707] ata2: DUMMY [ 5.731791] ata3: DUMMY [ 5.731875] ata4: DUMMY [ 6.291278] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.292579] ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100 [ 6.292671] ata1.00: 156301488 sectors, multi 16: LBA48 [ 6.294242] ata1.00: configured for UDMA/100 [ 6.305024] async_waiting @ 1854 [ 6.305112] async_continuing @ 1854 after 1 usec [ 6.305667] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4I PQ: 0 ANSI: 5 [ 6.305885] PM: Adding info for No Bus:target0:0:0 [ 6.306349] PM: Adding info for scsi:0:0:0:0 [ 6.307272] PM: Adding info for No Bus:0:0:0:0 [ 6.307969] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 6.308891] sd 0:0:0:0: [sda] Write Protect is off [ 6.308980] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.309482] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.310066] PM: Adding info for No Bus:sda [ 6.311900] sda: sda1 sda2 [ 6.691374] PM: Adding info for No Bus:sda1 [ 6.691839] PM: Adding info for No Bus:sda2 [ 6.693460] PM: Adding info for No Bus:8:0 [ 6.695453] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.695712] PM: Adding info for No Bus:0:0:0:0 [ 6.696703] PM: Adding info for No Bus:sg0 [ 6.697128] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.697297] async_waiting @ 1854 [ 6.697389] async_continuing @ 1854 after 1 usec [ 6.697498] async_waiting @ 1854 [ 6.697586] async_continuing @ 1854 after 1 usec [ 6.697704] async_waiting @ 1854 [ 6.697793] async_continuing @ 1854 after 1 usec [ 6.697890] work_for_cpu used greatest stack depth: 924 bytes left [ 6.698219] initcall ahci_init+0x0/0x20 returned 0 after 949611 usecs [ 6.698337] calling piix_init+0x0/0x30 @ 1 [ 6.698573] ata_piix 0000:00:1f.1: version 2.13 [ 6.698682] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 6.698923] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 6.699281] scsi4 : ata_piix [ 6.699453] PM: Adding info for No Bus:host4 [ 6.699796] PM: Adding info for No Bus:host4 [ 6.700239] scsi5 : ata_piix [ 6.700403] PM: Adding info for No Bus:host5 [ 6.700741] PM: Adding info for No Bus:host5 [ 6.701088] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 6.701181] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 6.855651] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33 [ 6.861557] ata5.00: configured for UDMA/33 [ 6.862570] async_waiting @ 1872 [ 6.862659] async_continuing @ 1872 after 1 usec [ 6.867443] scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5 [ 6.867674] PM: Adding info for No Bus:target4:0:0 [ 6.868115] PM: Adding info for scsi:4:0:0:0 [ 6.879849] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 6.879944] Uniform CD-ROM driver Revision: 3.20 [ 6.880525] PM: Adding info for No Bus:sr0 [ 6.881766] PM: Adding info for No Bus:11:0 [ 6.882214] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 6.882480] PM: Adding info for No Bus:4:0:0:0 [ 6.883239] PM: Adding info for No Bus:sg1 [ 6.883631] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 6.883809] ata6: port disabled. ignoring. [ 6.883905] async_waiting @ 1872 [ 6.883994] async_continuing @ 1872 after 1 usec [ 6.884400] initcall piix_init+0x0/0x30 returned 0 after 181612 usecs [ 6.884493] calling nv_init+0x0/0x20 @ 1 [ 6.884938] initcall nv_init+0x0/0x20 returned 0 after 345 usecs [ 6.885037] calling amd_init+0x0/0x20 @ 1 [ 6.885431] initcall amd_init+0x0/0x20 returned 0 after 295 usecs [ 6.885524] calling atiixp_init+0x0/0x20 @ 1 [ 6.885898] initcall atiixp_init+0x0/0x20 returned 0 after 276 usecs [ 6.885992] calling cs5530_init+0x0/0x20 @ 1 [ 6.886411] initcall cs5530_init+0x0/0x20 returned 0 after 316 usecs [ 6.886505] calling efar_init+0x0/0x20 @ 1 [ 6.886870] initcall efar_init+0x0/0x20 returned 0 after 269 usecs [ 6.886963] calling hpt3x3_init+0x0/0x20 @ 1 [ 6.887416] initcall hpt3x3_init+0x0/0x20 returned 0 after 342 usecs [ 6.887509] calling netcell_init+0x0/0x20 @ 1 [ 6.887885] initcall netcell_init+0x0/0x20 returned 0 after 277 usecs [ 6.887977] calling ninja32_init+0x0/0x20 @ 1 [ 6.888369] initcall ninja32_init+0x0/0x20 returned 0 after 284 usecs [ 6.888462] calling ns87410_init+0x0/0x20 @ 1 [ 6.888834] initcall ns87410_init+0x0/0x20 returned 0 after 274 usecs [ 6.888926] calling marvell_init+0x0/0x20 @ 1 [ 6.889319] initcall marvell_init+0x0/0x20 returned 0 after 292 usecs [ 6.889411] calling oldpiix_init+0x0/0x20 @ 1 [ 6.889783] initcall oldpiix_init+0x0/0x20 returned 0 after 273 usecs [ 6.889875] calling pdc202xx_init+0x0/0x20 @ 1 [ 6.890302] initcall pdc202xx_init+0x0/0x20 returned 0 after 325 usecs [ 6.890395] calling qdi_init+0x0/0x270 @ 1 [ 6.890487] initcall qdi_init+0x0/0x270 returned -19 after 1 usecs [ 6.890579] calling via_init+0x0/0x20 @ 1 [ 6.890943] initcall via_init+0x0/0x20 returned 0 after 267 usecs [ 6.891042] calling sch_init+0x0/0x20 @ 1 [ 6.891429] initcall sch_init+0x0/0x20 returned 0 after 286 usecs [ 6.891521] calling ata_generic_init+0x0/0x20 @ 1 [ 6.891897] initcall ata_generic_init+0x0/0x20 returned 0 after 276 usecs [ 6.891991] calling e1000_init_module+0x0/0x90 @ 1 [ 6.892084] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 6.892175] Copyright (c) 1999-2006 Intel Corporation. [ 6.892642] initcall e1000_init_module+0x0/0x90 returned 0 after 541 usecs [ 6.892736] calling e1000_init_module+0x0/0x70 @ 1 [ 6.892827] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 6.892915] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 6.893198] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.894168] e1000e 0000:02:00.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 6.894312] e1000e 0000:02:00.0: setting latency timer to 64 [ 6.894660] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 6.936460] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM [ 6.979519] PM: Adding info for No Bus:eth0 [ 6.980330] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:17:49:d2 [ 6.980460] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 6.980626] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003 [ 6.981054] initcall e1000_init_module+0x0/0x70 returned 0 after 86157 usecs [ 6.981148] calling ipg_init_module+0x0/0x20 @ 1 [ 6.981564] initcall ipg_init_module+0x0/0x20 returned 0 after 314 usecs [ 6.981657] calling atl1_init_module+0x0/0x20 @ 1 [ 6.982031] initcall atl1_init_module+0x0/0x20 returned 0 after 277 usecs [ 6.982124] calling atl1c_init_module+0x0/0x20 @ 1 [ 6.982546] initcall atl1c_init_module+0x0/0x20 returned 0 after 320 usecs [ 6.982640] calling jme_init_module+0x0/0x30 @ 1 [ 6.982729] jme: JMicron JMC2XX ethernet driver version 1.0.4 [ 6.983110] initcall jme_init_module+0x0/0x30 returned 0 after 369 usecs [ 6.983204] calling gem_init+0x0/0x20 @ 1 [ 6.983599] initcall gem_init+0x0/0x20 returned 0 after 284 usecs [ 6.983691] calling vortex_init+0x0/0xe0 @ 1 [ 6.984396] initcall vortex_init+0x0/0xe0 returned 0 after 597 usecs [ 6.984488] calling typhoon_init+0x0/0x20 @ 1 [ 6.984868] initcall typhoon_init+0x0/0x20 returned 0 after 280 usecs [ 6.984960] calling ne2k_pci_init+0x0/0x20 @ 1 [ 6.985417] initcall ne2k_pci_init+0x0/0x20 returned 0 after 346 usecs [ 6.985511] calling e100_init_module+0x0/0x60 @ 1 [ 6.985600] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 6.985690] e100: Copyright(c) 1999-2006 Intel Corporation [ 6.986158] initcall e100_init_module+0x0/0x60 returned 0 after 543 usecs [ 6.986269] calling tlan_probe+0x0/0x360 @ 1 [ 6.986358] ThunderLAN driver v1.15a [ 6.986743] TLAN: 0 devices installed, PCI: 0 EISA: 0 [ 6.987083] initcall tlan_probe+0x0/0x360 returned -19 after 706 usecs [ 6.987176] calling smsc9420_init_module+0x0/0x40 @ 1 [ 6.987581] initcall smsc9420_init_module+0x0/0x40 returned 0 after 284 usecs [ 6.987675] calling sis190_init_module+0x0/0x20 @ 1 [ 6.988111] initcall sis190_init_module+0x0/0x20 returned 0 after 335 usecs [ 6.988205] calling sis900_init_module+0x0/0x20 @ 1 [ 6.988738] initcall sis900_init_module+0x0/0x20 returned 0 after 342 usecs [ 6.988832] calling acenic_init+0x0/0x20 @ 1 [ 6.989222] initcall acenic_init+0x0/0x20 returned 0 after 292 usecs [ 6.989329] calling natsemi_init_mod+0x0/0x20 @ 1 [ 6.989757] initcall natsemi_init_mod+0x0/0x20 returned 0 after 327 usecs [ 6.989850] calling ns83820_init+0x0/0x30 @ 1 [ 6.989940] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 6.990333] initcall ns83820_init+0x0/0x30 returned 0 after 380 usecs [ 6.990425] calling fealnx_init+0x0/0x20 @ 1 [ 6.990794] initcall fealnx_init+0x0/0x20 returned 0 after 272 usecs [ 6.990886] calling tg3_init+0x0/0x20 @ 1 [ 6.991340] initcall tg3_init+0x0/0x20 returned 0 after 353 usecs [ 6.991433] calling bnx2_init+0x0/0x20 @ 1 [ 6.991801] initcall bnx2_init+0x0/0x20 returned 0 after 271 usecs [ 6.991894] calling davicom_init+0x0/0x60 @ 1 [ 6.992768] initcall davicom_init+0x0/0x60 returned 0 after 764 usecs [ 6.992862] calling smsc_init+0x0/0x90 @ 1 [ 6.994292] initcall smsc_init+0x0/0x90 returned 0 after 1306 usecs [ 6.994385] calling ip175c_init+0x0/0x10 @ 1 [ 6.994725] initcall ip175c_init+0x0/0x10 returned 0 after 242 usecs [ 6.994817] calling net_olddevs_init+0x0/0x90 @ 1 [ 6.995812] initcall net_olddevs_init+0x0/0x90 returned 0 after 881 usecs [ 6.995905] calling sb1000_init+0x0/0x10 @ 1 [ 6.996278] initcall sb1000_init+0x0/0x10 returned 0 after 274 usecs [ 6.996371] calling NS8390p_init_module+0x0/0x10 @ 1 [ 6.996463] initcall NS8390p_init_module+0x0/0x10 returned 0 after 1 usecs [ 6.996556] calling b44_init+0x0/0x70 @ 1 [ 6.997187] initcall b44_init+0x0/0x70 returned 0 after 529 usecs [ 6.997332] calling init_nic+0x0/0x20 @ 1 [ 6.997702] initcall init_nic+0x0/0x20 returned 0 after 273 usecs [ 6.997794] calling cp_init+0x0/0x20 @ 1 [ 6.998167] initcall cp_init+0x0/0x20 returned 0 after 276 usecs [ 6.998276] calling rtl8139_init_module+0x0/0x20 @ 1 [ 6.998651] initcall rtl8139_init_module+0x0/0x20 returned 0 after 277 usecs [ 6.998744] calling lp486e_init_module+0x0/0x2d0 @ 1 [ 6.999492] eth%d: i82596 initialization timed out [ 6.999592] initcall lp486e_init_module+0x0/0x2d0 returned -19 after 738 usecs [ 6.999721] calling eql_init_module+0x0/0x60 @ 1 [ 6.999811] Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 7.000347] PM: Adding info for No Bus:eql [ 7.001163] initcall eql_init_module+0x0/0x60 returned 0 after 1317 usecs [ 7.001272] calling tun_init+0x0/0xa0 @ 1 [ 7.001361] tun: Universal TUN/TAP device driver, 1.6 [ 7.001449] tun: (C) 1999-2004 Max Krasnyansky [ 7.001732] PM: Adding info for No Bus:tun [ 7.002121] initcall tun_init+0x0/0xa0 returned 0 after 741 usecs [ 7.002213] calling rio_init+0x0/0x20 @ 1 [ 7.002613] initcall rio_init+0x0/0x20 returned 0 after 282 usecs [ 7.002705] calling asix_init+0x0/0x20 @ 1 [ 7.003069] usbcore: registered new interface driver asix [ 7.003172] initcall asix_init+0x0/0x20 returned 0 after 369 usecs [ 7.003277] calling cdc_init+0x0/0x20 @ 1 [ 7.003622] usbcore: registered new interface driver cdc_ether [ 7.003723] initcall cdc_init+0x0/0x20 returned 0 after 348 usecs [ 7.003815] calling smsc95xx_init+0x0/0x20 @ 1 [ 7.004223] usbcore: registered new interface driver smsc95xx [ 7.004343] initcall smsc95xx_init+0x0/0x20 returned 0 after 426 usecs [ 7.004435] calling net1080_init+0x0/0x20 @ 1 [ 7.004789] usbcore: registered new interface driver net1080 [ 7.004889] initcall net1080_init+0x0/0x20 returned 0 after 355 usecs [ 7.004982] calling plusb_init+0x0/0x20 @ 1 [ 7.005395] usbcore: registered new interface driver plusb [ 7.005495] initcall plusb_init+0x0/0x20 returned 0 after 408 usecs [ 7.005587] calling rndis_init+0x0/0x20 @ 1 [ 7.005925] usbcore: registered new interface driver rndis_host [ 7.006031] initcall rndis_init+0x0/0x20 returned 0 after 345 usecs [ 7.006124] calling usbnet_init+0x0/0x30 @ 1 [ 7.006223] initcall usbnet_init+0x0/0x30 returned 0 after 8 usecs [ 7.006330] calling usbpn_init+0x0/0x20 @ 1 [ 7.006673] usbcore: registered new interface driver cdc_phonet [ 7.006775] initcall usbpn_init+0x0/0x20 returned 0 after 346 usecs [ 7.006867] calling prism54_module_init+0x0/0x40 @ 1 [ 7.006958] Loaded prism54 driver, version 1.2 [ 7.007340] initcall prism54_module_init+0x0/0x40 returned 0 after 370 usecs [ 7.007433] calling rndis_wlan_init+0x0/0x20 @ 1 [ 7.007855] usbcore: registered new interface driver rndis_wlan [ 7.007957] initcall rndis_wlan_init+0x0/0x20 returned 0 after 422 usecs [ 7.008059] calling lbs_init_module+0x0/0x50 @ 1 [ 7.008173] initcall lbs_init_module+0x0/0x50 returned 0 after 21 usecs [ 7.008304] calling init_netconsole+0x0/0x200 @ 1 [ 7.008401] netconsole: local port 4444 [ 7.008487] netconsole: local IP 10.0.1.15 [ 7.008574] netconsole: interface eth0 [ 7.008660] netconsole: remote port 4444 [ 7.008746] netconsole: remote IP 10.0.1.21 [ 7.008833] netconsole: remote ethernet address 00:30:48:c6:86:26 [ 7.008929] netconsole: device eth0 not up yet, forcing it [ 7.029077] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 7.080380] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 8.628601] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 8.628731] 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9.029819] console [netcon0] enabled [ 9.029932] netconsole: network logging started [ 9.030062] initcall init_netconsole+0x0/0x200 returned 0 after 1974278 usecs [ 9.030184] calling cdrom_init+0x0/0x10 @ 1 [ 9.030309] initcall cdrom_init+0x0/0x10 returned 0 after 1 usecs [ 9.030423] calling uwb_subsys_init+0x0/0x60 @ 1 [ 9.030901] initcall uwb_subsys_init+0x0/0x60 returned 0 after 355 usecs [ 9.031019] calling hwarc_driver_init+0x0/0x20 @ 1 [ 9.031417] usbcore: registered new interface driver hwa-rc [ 9.031545] initcall hwarc_driver_init+0x0/0x20 returned 0 after 396 usecs [ 9.031660] calling i1480_dfu_driver_init+0x0/0x20 @ 1 [ 9.032080] usbcore: registered new interface driver i1480-dfu-usb [ 9.032207] initcall i1480_dfu_driver_init+0x0/0x20 returned 0 after 422 usecs [ 9.032377] calling i1480_est_init+0x0/0xb0 @ 1 [ 9.032500] initcall i1480_est_init+0x0/0xb0 returned 0 after 10 usecs [ 9.032614] calling ehci_hcd_init+0x0/0x110 @ 1 [ 9.032728] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.032841] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 9.034239] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 9.034388] IOAPIC[0]: Set routing entry (1-19 -> 0xb1 -> IRQ 19 Mode:1 Active:1) [ 9.034553] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 9.034720] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 9.034840] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 9.035176] drivers/usb/core/inode.c: creating file 'devices' [ 9.035321] drivers/usb/core/inode.c: creating file '001' [ 9.035468] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 9.035645] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 9.035812] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 9.036166] ehci_hcd 0000:00:1d.7: reset command 080022 (park)=0 ithresh=8 Async period=1024 Reset HALT [ 9.040230] ehci_hcd 0000:00:1d.7: debug port 1 [ 9.040363] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 9.040489] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 9.040699] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000 [ 9.040820] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 9.044854] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 9.051051] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 9.051453] usb usb1: default language 0x0409 [ 9.051705] usb usb1: udev 1, busnum 1, minor = 0 [ 9.051824] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.051945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.052153] usb usb1: Product: EHCI Host Controller [ 9.052273] usb usb1: Manufacturer: Linux 2.6.31-rc6-tip-01322-gd685ec8-dirty ehci_hcd [ 9.052432] usb usb1: SerialNumber: 0000:00:1d.7 [ 9.053108] PM: Adding info for usb:usb1 [ 9.053319] usb usb1: uevent [ 9.053733] usb usb1: usb_probe_device [ 9.053857] usb usb1: configuration #1 chosen from 1 choice [ 9.054092] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 9.054471] PM: Adding info for usb:1-0:1.0 [ 9.054625] usb 1-0:1.0: uevent [ 9.055098] hub 1-0:1.0: usb_probe_interface [ 9.055230] hub 1-0:1.0: usb_probe_interface - got id [ 9.055367] hub 1-0:1.0: USB hub found [ 9.055606] hub 1-0:1.0: 8 ports detected [ 9.055742] hub 1-0:1.0: standalone hub [ 9.055876] hub 1-0:1.0: no power switching (usb 1.0) [ 9.056848] hub 1-0:1.0: individual port over-current protection [ 9.056996] hub 1-0:1.0: power on to power good time: 20ms [ 9.057227] hub 1-0:1.0: local power source is good [ 9.057381] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 9.058076] PM: Adding info for No Bus:ep_81 [ 9.058436] PM: Adding info for No Bus:usbdev1.1 [ 9.058850] drivers/usb/core/inode.c: creating file '001' [ 9.059212] PM: Adding info for No Bus:ep_00 [ 9.059707] initcall ehci_hcd_init+0x0/0x110 returned 0 after 26342 usecs [ 9.059825] calling isp116x_init+0x0/0x50 @ 1 [ 9.059937] 116x: driver isp116x-hcd, 03 Nov 2005 [ 9.060355] initcall isp116x_init+0x0/0x50 returned 0 after 405 usecs [ 9.060471] calling ohci_hcd_mod_init+0x0/0x100 @ 1 [ 9.060584] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.060698] ohci_hcd: block sizes: ed 64 td 64 [ 9.061726] initcall ohci_hcd_mod_init+0x0/0x100 returned 0 after 1112 usecs [ 9.061843] calling uhci_hcd_init+0x0/0x160 @ 1 [ 9.061954] uhci_hcd: USB Universal Host Controller Interface driver [ 9.063314] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 9.063447] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.063587] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 9.063707] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 9.063865] drivers/usb/core/inode.c: creating file '002' [ 9.064145] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 9.064322] uhci_hcd 0000:00:1d.0: detected 2 ports [ 9.064442] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.064565] uhci_hcd 0000:00:1d.0: Performing full reset [ 9.064698] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 9.064918] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 [ 9.065402] usb usb2: default language 0x0409 [ 9.065663] usb usb2: udev 1, busnum 2, minor = 128 [ 9.065782] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.065903] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.066104] usb usb2: Product: UHCI Host Controller [ 9.066223] usb usb2: Manufacturer: Linux 2.6.31-rc6-tip-01322-gd685ec8-dirty uhci_hcd [ 9.066386] usb usb2: SerialNumber: 0000:00:1d.0 [ 9.066941] PM: Adding info for usb:usb2 [ 9.067204] usb usb2: uevent [ 9.067593] usb usb2: usb_probe_device [ 9.067715] usb usb2: configuration #1 chosen from 1 choice [ 9.067907] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 9.068338] PM: Adding info for usb:2-0:1.0 [ 9.068491] usb 2-0:1.0: uevent [ 9.068913] hub 2-0:1.0: usb_probe_interface [ 9.069087] hub 2-0:1.0: usb_probe_interface - got id [ 9.069221] hub 2-0:1.0: USB hub found [ 9.069461] hub 2-0:1.0: 2 ports detected [ 9.069597] hub 2-0:1.0: standalone hub [ 9.069732] hub 2-0:1.0: no power switching (usb 1.0) [ 9.069868] hub 2-0:1.0: individual port over-current protection [ 9.070123] hub 2-0:1.0: power on to power good time: 2ms [ 9.070364] hub 2-0:1.0: local power source is good [ 9.070513] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 9.070940] PM: Adding info for No Bus:ep_81 [ 9.071350] PM: Adding info for No Bus:usbdev2.1 [ 9.071761] drivers/usb/core/inode.c: creating file '001' [ 9.072108] PM: Adding info for No Bus:ep_00 [ 9.072397] IOAPIC[0]: Set routing entry (1-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1) [ 9.072563] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9.072699] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 9.072817] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 9.073044] drivers/usb/core/inode.c: creating file '003' [ 9.073187] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 9.073368] uhci_hcd 0000:00:1d.1: detected 2 ports [ 9.073488] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.073610] uhci_hcd 0000:00:1d.1: Performing full reset [ 9.073744] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 9.073959] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 [ 9.074395] usb usb3: default language 0x0409 [ 9.074648] usb usb3: udev 1, busnum 3, minor = 256 [ 9.074766] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.074887] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.075090] usb usb3: Product: UHCI Host Controller [ 9.075209] usb usb3: Manufacturer: Linux 2.6.31-rc6-tip-01322-gd685ec8-dirty uhci_hcd [ 9.075374] usb usb3: SerialNumber: 0000:00:1d.1 [ 9.075882] PM: Adding info for usb:usb3 [ 9.076134] usb usb3: uevent [ 9.076513] usb usb3: usb_probe_device [ 9.076635] usb usb3: configuration #1 chosen from 1 choice [ 9.076826] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 9.077277] PM: Adding info for usb:3-0:1.0 [ 9.077431] usb 3-0:1.0: uevent [ 9.077849] hub 3-0:1.0: usb_probe_interface [ 9.078023] hub 3-0:1.0: usb_probe_interface - got id [ 9.078157] hub 3-0:1.0: USB hub found [ 9.078393] hub 3-0:1.0: 2 ports detected [ 9.078528] hub 3-0:1.0: standalone hub [ 9.078661] hub 3-0:1.0: no power switching (usb 1.0) [ 9.078795] hub 3-0:1.0: individual port over-current protection [ 9.078932] hub 3-0:1.0: power on to power good time: 2ms [ 9.079228] hub 3-0:1.0: local power source is good [ 9.079380] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 9.079801] PM: Adding info for No Bus:ep_81 [ 9.080196] PM: Adding info for No Bus:usbdev3.1 [ 9.080620] drivers/usb/core/inode.c: creating file '001' [ 9.080943] PM: Adding info for No Bus:ep_00 [ 9.082323] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 9.082460] IOAPIC[0]: Set routing entry (1-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1) [ 9.082625] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.082762] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 9.082880] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 9.083099] drivers/usb/core/inode.c: creating file '004' [ 9.083242] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 9.083421] uhci_hcd 0000:00:1d.2: detected 2 ports [ 9.083542] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.083664] uhci_hcd 0000:00:1d.2: Performing full reset [ 9.083800] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 9.084065] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 9.084445] usb usb4: default language 0x0409 [ 9.084703] usb usb4: udev 1, busnum 4, minor = 384 [ 9.084822] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.084948] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.085156] usb usb4: Product: UHCI Host Controller [ 9.085276] usb usb4: Manufacturer: Linux 2.6.31-rc6-tip-01322-gd685ec8-dirty uhci_hcd [ 9.085435] usb usb4: SerialNumber: 0000:00:1d.2 [ 9.085983] PM: Adding info for usb:usb4 [ 9.086204] usb usb4: uevent [ 9.086599] usb usb4: usb_probe_device [ 9.086722] usb usb4: configuration #1 chosen from 1 choice [ 9.086909] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 9.087367] PM: Adding info for usb:4-0:1.0 [ 9.087522] usb 4-0:1.0: uevent [ 9.087935] hub 4-0:1.0: usb_probe_interface [ 9.088108] hub 4-0:1.0: usb_probe_interface - got id [ 9.088242] hub 4-0:1.0: USB hub found [ 9.088476] hub 4-0:1.0: 2 ports detected [ 9.088611] hub 4-0:1.0: standalone hub [ 9.088744] hub 4-0:1.0: no power switching (usb 1.0) [ 9.088879] hub 4-0:1.0: individual port over-current protection [ 9.089101] hub 4-0:1.0: power on to power good time: 2ms [ 9.089335] hub 4-0:1.0: local power source is good [ 9.089483] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 9.089906] PM: Adding info for No Bus:ep_81 [ 9.090316] PM: Adding info for No Bus:usbdev4.1 [ 9.090726] drivers/usb/core/inode.c: creating file '001' [ 9.091076] PM: Adding info for No Bus:ep_00 [ 9.091355] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 9.091493] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 9.091612] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 9.091767] drivers/usb/core/inode.c: creating file '005' [ 9.091908] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 9.092138] uhci_hcd 0000:00:1d.3: detected 2 ports [ 9.092262] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.092385] uhci_hcd 0000:00:1d.3: Performing full reset [ 9.092549] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 [ 9.092923] usb usb5: default language 0x0409 [ 9.093236] usb usb5: udev 1, busnum 5, minor = 512 [ 9.093355] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.093475] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.093632] usb usb5: Product: UHCI Host Controller [ 9.093749] usb usb5: Manufacturer: Linux 2.6.31-rc6-tip-01322-gd685ec8-dirty uhci_hcd [ 9.093908] usb usb5: SerialNumber: 0000:00:1d.3 [ 9.094466] PM: Adding info for usb:usb5 [ 9.094674] usb usb5: uevent [ 9.095087] usb usb5: usb_probe_device [ 9.095210] usb usb5: configuration #1 chosen from 1 choice [ 9.095404] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 9.095788] PM: Adding info for usb:5-0:1.0 [ 9.095940] usb 5-0:1.0: uevent [ 9.096413] hub 5-0:1.0: usb_probe_interface [ 9.096545] hub 5-0:1.0: usb_probe_interface - got id [ 9.096684] hub 5-0:1.0: USB hub found [ 9.096915] hub 5-0:1.0: 2 ports detected [ 9.097114] hub 5-0:1.0: standalone hub [ 9.097248] hub 5-0:1.0: no power switching (usb 1.0) [ 9.097388] hub 5-0:1.0: individual port over-current protection [ 9.098336] hub 5-0:1.0: power on to power good time: 2ms [ 9.098553] hub 5-0:1.0: local power source is good [ 9.098701] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 9.099163] PM: Adding info for No Bus:ep_81 [ 9.099526] PM: Adding info for No Bus:usbdev5.1 [ 9.099935] drivers/usb/core/inode.c: creating file '001' [ 9.100465] PM: Adding info for No Bus:ep_00 [ 9.100968] initcall uhci_hcd_init+0x0/0x160 returned 0 after 38094 usecs [ 9.101093] calling r8a66597_init+0x0/0x50 @ 1 [ 9.101204] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 [ 9.101629] initcall r8a66597_init+0x0/0x50 returned 0 after 411 usecs [ 9.101746] calling hwahc_driver_init+0x0/0x20 @ 1 [ 9.102133] usbcore: registered new interface driver hwa-hc [ 9.102337] initcall hwahc_driver_init+0x0/0x20 returned 0 after 465 usecs [ 9.102454] calling wusbcore_init+0x0/0x80 @ 1 [ 9.102647] initcall wusbcore_init+0x0/0x80 returned 0 after 78 usecs [ 9.102762] calling acm_init+0x0/0xe0 @ 1 [ 9.103165] usbcore: registered new interface driver cdc_acm [ 9.103317] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 9.103472] initcall acm_init+0x0/0xe0 returned 0 after 583 usecs [ 9.103585] calling usb_mdc800_init+0x0/0x380 @ 1 [ 9.104016] usbcore: registered new interface driver mdc800 [ 9.104140] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 9.104335] initcall usb_mdc800_init+0x0/0x380 returned 0 after 621 usecs [ 9.104452] calling adu_init+0x0/0xa0 @ 1 [ 9.104563] drivers/usb/misc/adutux.c : adu_init : enter [ 9.105011] usbcore: registered new interface driver adutux [ 9.105135] adutux adutux (see www.ontrak.net) v0.0.13 [ 9.105246] adutux is an experimental driver. Use at your own risk [ 9.105379] drivers/usb/misc/adutux.c : adu_init : leave, return value 0 [ 9.105499] initcall adu_init+0x0/0xa0 returned 0 after 912 usecs [ 9.105612] calling usb_cytherm_init+0x0/0x50 @ 1 [ 9.106084] usbcore: registered new interface driver cytherm [ 9.106207] cytherm: v1.0:Cypress USB Thermometer driver [ 9.106370] initcall usb_cytherm_init+0x0/0x50 returned 0 after 628 usecs [ 9.106486] calling emi62_init+0x0/0x30 @ 1 [ 9.106867] usbcore: registered new interface driver emi62 - firmware loader [ 9.107001] initcall emi62_init+0x0/0x30 returned 0 after 393 usecs [ 9.107118] calling usb_idmouse_init+0x0/0x50 @ 1 [ 9.107230] idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver [ 9.107627] usbcore: registered new interface driver idmouse [ 9.107759] initcall usb_idmouse_init+0x0/0x50 returned 0 after 513 usecs [ 9.107874] calling lego_usb_tower_init+0x0/0x90 @ 1 [ 9.107994] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter [ 9.108488] usbcore: registered new interface driver legousbtower [ 9.108612] legousbtower: v0.96:LEGO USB Tower Driver [ 9.108724] drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0 [ 9.108880] initcall lego_usb_tower_init+0x0/0x90 returned 0 after 863 usecs [ 9.109003] calling usbtest_init+0x0/0x40 @ 1 [ 9.109462] usbcore: registered new interface driver usbtest [ 9.109589] initcall usbtest_init+0x0/0x40 returned 0 after 458 usecs [ 9.109704] calling usb_sevseg_init+0x0/0x40 @ 1 [ 9.110122] usbcore: registered new interface driver usbsevseg [ 9.110249] initcall usb_sevseg_init+0x0/0x40 returned 0 after 422 usecs [ 9.110395] calling vstusb_init+0x0/0x40 @ 1 [ 9.110768] usbcore: registered new interface driver vstusb [ 9.110894] initcall vstusb_init+0x0/0x40 returned 0 after 376 usecs [ 9.111018] calling i8042_init+0x0/0x430 @ 1 [ 9.111774] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 9.112360] PM: Adding info for platform:i8042 [ 9.122190] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 9.122337] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 9.122461] PM: Adding info for serio:serio0 [ 9.122482] initcall i8042_init+0x0/0x430 returned 0 after 11082 usecs [ 9.122486] calling serport_init+0x0/0x30 @ 1 [ 9.122493] initcall serport_init+0x0/0x30 returned 0 after 2 usecs [ 9.122497] calling ct82c710_init+0x0/0x1a0 @ 1 [ 9.122533] initcall ct82c710_init+0x0/0x1a0 returned -19 after 30 usecs [ 9.122536] calling serio_raw_init+0x0/0x20 @ 1 [ 9.123516] initcall serio_raw_init+0x0/0x20 returned 0 after 951 usecs [ 9.123634] calling ns558_init+0x0/0x470 @ 1 [ 9.124173] PM: Adding info for serio:serio1 [ 9.155065] initcall ns558_init+0x0/0x470 returned 0 after 30581 usecs [ 9.155182] calling mousedev_init+0x0/0x90 @ 1 [ 9.155455] PM: Adding info for No Bus:mice [ 9.156148] PM: Adding info for No Bus:mouse0 [ 9.156625] PM: Adding info for No Bus:psaux [ 9.156959] mice: PS/2 mouse device common for all mice [ 9.157095] initcall mousedev_init+0x0/0x90 returned 0 after 1754 usecs [ 9.157212] calling evbug_init+0x0/0x10 @ 1 [ 9.157499] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT [ 9.157680] hub 1-0:1.0: port 8: status 0501 change 0001 [ 9.157829] evbug.c: Connected device: input0 (Macintosh mouse button emulation at unknown) [ 9.158092] initcall evbug_init+0x0/0x10 returned 0 after 742 usecs [ 9.158208] calling atkbd_init+0x0/0x20 @ 1 [ 9.158620] initcall atkbd_init+0x0/0x20 returned 0 after 283 usecs [ 9.158741] calling lkkbd_init+0x0/0x20 @ 1 [ 9.159168] initcall lkkbd_init+0x0/0x20 returned 0 after 306 usecs [ 9.159295] calling nkbd_init+0x0/0x20 @ 1 [ 9.159692] initcall nkbd_init+0x0/0x20 returned 0 after 277 usecs [ 9.159807] calling a3d_init+0x0/0x20 @ 1 [ 9.160260] initcall a3d_init+0x0/0x20 returned 0 after 292 usecs [ 9.160377] calling adi_init+0x0/0x20 @ 1 [ 9.160762] initcall adi_init+0x0/0x20 returned 0 after 268 usecs [ 9.160879] calling grip_init+0x0/0x20 @ 1 [ 9.161353] initcall grip_init+0x0/0x20 returned 0 after 291 usecs [ 9.161469] calling iforce_init+0x0/0x50 @ 1 [ 9.161867] usbcore: registered new interface driver iforce [ 9.162372] initcall iforce_init+0x0/0x50 returned 0 after 770 usecs [ 9.162488] calling spaceball_init+0x0/0x20 @ 1 [ 9.162889] initcall spaceball_init+0x0/0x20 returned 0 after 273 usecs [ 9.163066] calling spaceorb_init+0x0/0x20 @ 1 [ 9.163560] initcall spaceorb_init+0x0/0x20 returned 0 after 369 usecs [ 9.163678] calling twidjoy_init+0x0/0x20 @ 1 [ 9.163687] PM: Adding info for No Bus:input1 [ 9.164342] input: AT Translated Set 2 keyboard as /class/input/input1 [ 9.164433] initcall twidjoy_init+0x0/0x20 returned 0 after 519 usecs [ 9.164437] calling usb_xpad_init+0x0/0x30 @ 1 [ 9.164730] evbug.c: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 9.164783] usbcore: registered new interface driver xpad [ 9.164793] xpad: X-Box pad driver [ 9.164799] initcall usb_xpad_init+0x0/0x30 returned 0 after 348 usecs [ 9.164802] calling usb_acecad_init+0x0/0x30 @ 1 [ 9.165131] usbcore: registered new interface driver usb_acecad [ 9.165143] acecad: v3.2:USB Acecad Flair tablet driver [ 9.165149] initcall usb_acecad_init+0x0/0x30 returned 0 after 331 usecs [ 9.165152] calling gtco_init+0x0/0x60 @ 1 [ 9.165432] usbcore: registered new interface driver gtco [ 9.165443] GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x60 returned 0 after 284 usecs [ 9.165451] calling kbtab_init+0x0/0x30 @ 1 [ 9.165725] usbcore: registered new interface driver kbtab [ 9.165735] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver [ 9.165741] initcall kbtab_init+0x0/0x30 returned 0 after 278 usecs [ 9.165744] calling tr_init+0x0/0x20 @ 1 [ 9.166125] initcall tr_init+0x0/0x20 returned 0 after 364 usecs [ 9.166129] calling i2o_iop_init+0x0/0x50 @ 1 [ 9.166132] I2O subsystem v1.325 [ 9.166135] i2o: max drivers = 8 [ 9.167265] initcall i2o_iop_init+0x0/0x50 returned 0 after 1102 usecs [ 9.167390] calling i2o_bus_init+0x0/0x40 @ 1 [ 9.167503] I2O Bus Adapter OSM v1.317 [ 9.167883] initcall i2o_bus_init+0x0/0x40 returned 0 after 369 usecs [ 9.168102] calling i2o_proc_init+0x0/0x1a0 @ 1 [ 9.168215] I2O ProcFS OSM v1.316 [ 9.168614] initcall i2o_proc_init+0x0/0x1a0 returned 0 after 387 usecs [ 9.168729] calling ds1511_rtc_init+0x0/0x10 @ 1 [ 9.169238] initcall ds1511_rtc_init+0x0/0x10 returned 0 after 384 usecs [ 9.169357] calling ds1742_init+0x0/0x10 @ 1 [ 9.169723] initcall ds1742_init+0x0/0x10 returned 0 after 247 usecs [ 9.169841] calling w1_init+0x0/0xa0 @ 1 [ 9.169984] Driver for 1-wire Dallas network protocol. [ 9.170394] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.171374] initcall w1_init+0x0/0xa0 returned 0 after 1354 usecs [ 9.171490] calling w1_smem_init+0x0/0x40 @ 1 [ 9.171607] initcall w1_smem_init+0x0/0x40 returned 0 after 3 usecs [ 9.171722] calling w1_f2d_init+0x0/0x10 @ 1 [ 9.171835] initcall w1_f2d_init+0x0/0x10 returned 0 after 2 usecs [ 9.171985] calling w1_ds2760_init+0x0/0x30 @ 1 [ 9.172152] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 9.172315] initcall w1_ds2760_init+0x0/0x30 returned 0 after 158 usecs [ 9.172439] calling ds2760_battery_init+0x0/0x10 @ 1 [ 9.172810] initcall ds2760_battery_init+0x0/0x10 returned 0 after 248 usecs [ 9.172963] calling sensors_w83627hf_init+0x0/0x170 @ 1 [ 9.173166] initcall sensors_w83627hf_init+0x0/0x170 returned -19 after 19 usecs [ 9.173329] calling f71805f_init+0x0/0x190 @ 1 [ 9.173470] initcall f71805f_init+0x0/0x190 returned -19 after 26 usecs [ 9.173584] calling f71882fg_init+0x0/0x160 @ 1 [ 9.173725] initcall f71882fg_init+0x0/0x160 returned -19 after 26 usecs [ 9.173839] calling hdaps_init+0x0/0x200 @ 1 [ 9.174018] hdaps: inverting axis (3) readings. [ 9.174129] hdaps: LENOVO ThinkPad T60 detected. [ 9.174610] PM: Adding info for platform:hdaps [ 9.175857] PM: Adding info for No Bus:input2 [ 9.176224] input: hdaps as /class/input/input2 [ 9.176431] evbug.c: Connected device: input2 (hdaps at isa1600/input0) [ 9.176551] hdaps: driver successfully loaded. [ 9.176665] initcall hdaps_init+0x0/0x200 returned 0 after 2603 usecs [ 9.176780] calling aem_init+0x0/0x50 @ 1 [ 9.177229] initcall aem_init+0x0/0x50 returned 0 after 327 usecs [ 9.177350] calling sm_it87_init+0x0/0x340 @ 1 [ 9.178322] initcall sm_it87_init+0x0/0x340 returned -19 after 22 usecs [ 9.178439] calling k8temp_init+0x0/0x20 @ 1 [ 9.178839] initcall k8temp_init+0x0/0x20 returned 0 after 280 usecs [ 9.178982] calling lis3lv02d_init_module+0x0/0x40 @ 1 [ 9.179173] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.179593] lis3lv02d driver loaded. [ 9.179708] initcall lis3lv02d_init_module+0x0/0x40 returned 0 after 579 usecs [ 9.179860] calling smsc47b397_init+0x0/0x1a0 @ 1 [ 9.180038] initcall smsc47b397_init+0x0/0x1a0 returned -19 after 10 usecs [ 9.180155] calling vt1211_init+0x0/0x180 @ 1 [ 9.180288] initcall vt1211_init+0x0/0x180 returned -19 after 20 usecs [ 9.180404] calling sm_vt8231_init+0x0/0x20 @ 1 [ 9.180800] initcall sm_vt8231_init+0x0/0x20 returned 0 after 274 usecs [ 9.180953] calling sensors_w83627ehf_init+0x0/0x180 @ 1 [ 9.181121] initcall sensors_w83627ehf_init+0x0/0x180 returned -19 after 30 usecs [ 9.181276] calling pcwd_init_module+0x0/0x20 @ 1 [ 9.181745] PM: Adding info for isa:pcwd.0 [ 9.182139] PM: Removing info for isa:pcwd.0 [ 9.182627] PM: Adding info for isa:pcwd.1 [ 9.182965] PM: Removing info for isa:pcwd.1 [ 9.183510] PM: Adding info for isa:pcwd.2 [ 9.183849] PM: Removing info for isa:pcwd.2 [ 9.184507] initcall pcwd_init_module+0x0/0x20 returned -19 after 3043 usecs [ 9.184625] calling mixcomwd_init+0x0/0x180 @ 1 [ 9.184958] mixcomwd: No card detected, or port not available. [ 9.185100] initcall mixcomwd_init+0x0/0x180 returned -19 after 351 usecs [ 9.185216] calling pcipcwd_init_module+0x0/0x30 @ 1 [ 9.185626] initcall pcipcwd_init_module+0x0/0x30 returned 0 after 279 usecs [ 9.185742] calling usb_pcwd_init+0x0/0x50 @ 1 [ 9.186181] usbcore: registered new interface driver pcwd_usb [ 9.186313] pcwd_usb: Berkshire USB-PC Watchdog driver v1.02 [ 9.186430] initcall usb_pcwd_init+0x0/0x50 returned 0 after 560 usecs [ 9.186545] calling advwdt_init+0x0/0x70 @ 1 [ 9.186656] WDT driver for Advantech single board computer initialising. [ 9.187172] PM: Adding info for platform:advantechwdt [ 9.187760] PM: Adding info for No Bus:watchdog [ 9.188154] advantechwdt: initialized. timeout=60 sec (nowayout=1) [ 9.188284] initcall advwdt_init+0x0/0x70 returned 0 after 1586 usecs [ 9.188401] calling alim7101_wdt_init+0x0/0x200 @ 1 [ 9.188513] alim7101_wdt: Steve Hill . [ 9.188640] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 9.188756] initcall alim7101_wdt_init+0x0/0x200 returned -16 after 235 usecs [ 9.188873] initcall alim7101_wdt_init+0x0/0x200 returned with error code -16 [ 9.189092] calling sc520_wdt_init+0x0/0x110 @ 1 [ 9.189276] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.189421] sc520_wdt: cannot register miscdev on minor=130 (err=-16) [ 9.189549] initcall sc520_wdt_init+0x0/0x110 returned -16 after 334 usecs [ 9.189667] initcall sc520_wdt_init+0x0/0x110 returned with error code -16 [ 9.189783] calling ibmasr_init+0x0/0x290 @ 1 [ 9.189940] initcall ibmasr_init+0x0/0x290 returned -19 after 1 usecs [ 9.190075] calling wafwdt_init+0x0/0x1c0 @ 1 [ 9.190186] WDT driver for Wafer 5823 single board computer initialising. [ 9.190322] Wafer 5823 WDT: I/O address 0x0443 already in use [ 9.190442] initcall wafwdt_init+0x0/0x1c0 returned -5 after 249 usecs [ 9.190557] initcall wafwdt_init+0x0/0x1c0 returned with error code -5 [ 9.190671] calling pc87413_init+0x0/0xa0 @ 1 [ 9.190783] pc87413 WDT: Version 1.1 at io 0x2E [ 9.190945] pc87413 WDT: cannot register miscdev on minor=130 (err=-16) [ 9.191078] initcall pc87413_init+0x0/0xa0 returned -16 after 285 usecs [ 9.191194] initcall pc87413_init+0x0/0xa0 returned with error code -16 [ 9.191313] calling sbc60xxwdt_init+0x0/0x1e0 @ 1 [ 9.191434] sbc60xxwdt: I/O address 0x0443 already in use [ 9.191549] initcall sbc60xxwdt_init+0x0/0x1e0 returned -5 after 118 usecs [ 9.191664] initcall sbc60xxwdt_init+0x0/0x1e0 returned with error code -5 [ 9.191778] calling wb_smsc_wdt_init+0x0/0x1d0 @ 1 [ 9.191941] SMsC 37B787 watchdog component driver 1.1 initialising... [ 9.193116] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 9.193236] initcall wb_smsc_wdt_init+0x0/0x1d0 returned -16 after 1262 usecs [ 9.193354] initcall wb_smsc_wdt_init+0x0/0x1d0 returned with error code -16 [ 9.193469] calling wdt_init+0x0/0x220 @ 1 [ 9.193580] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising. [ 9.193774] w83627hf/thf/hg WDT: Watchdog already running. Resetting timeout to 60 sec [ 9.193999] w83627hf/thf/hg WDT: cannot register miscdev on minor=130 (err=-16) [ 9.194173] initcall wdt_init+0x0/0x220 returned -16 after 576 usecs [ 9.194290] initcall wdt_init+0x0/0x220 returned with error code -16 [ 9.194404] calling zf_init+0x0/0x1b0 @ 1 [ 9.194514] machzwd: MachZ ZF-Logic Watchdog driver initializing. [ 9.194630] machzwd: no ZF-Logic found [ 9.194742] initcall zf_init+0x0/0x1b0 returned -19 after 220 usecs [ 9.194856] calling watchdog_init+0x0/0xd0 @ 1 [ 9.195037] epx_c3: cannot register miscdev on minor=130 (err=-16) [ 9.195157] initcall watchdog_init+0x0/0xd0 returned -16 after 121 usecs [ 9.195273] initcall watchdog_init+0x0/0xd0 returned with error code -16 [ 9.195388] calling telephony_init+0x0/0x50 @ 1 [ 9.195499] Linux telephony interface: v1.00 [ 9.195632] initcall telephony_init+0x0/0x50 returned 0 after 128 usecs [ 9.195748] calling kcapi_init+0x0/0xa0 @ 1 [ 9.196035] CAPI Subsystem Rev 1.1.2.8 [ 9.196154] initcall kcapi_init+0x0/0xa0 returned 0 after 286 usecs [ 9.196268] calling capi_init+0x0/0x180 @ 1 [ 9.196784] PM: Adding info for No Bus:capi [ 9.197193] capi20: Rev 1.1.2.7: started up with major 68 (no middleware) [ 9.197320] initcall capi_init+0x0/0x180 returned 0 after 917 usecs [ 9.197435] calling b1isa_init+0x0/0x100 @ 1 [ 9.197546] b1isa: revision 1.1.2.3 [ 9.197658] initcall b1isa_init+0x0/0x100 returned 0 after 108 usecs [ 9.197772] calling b1_init+0x0/0x80 @ 1 [ 9.197924] b1: revision 1.1.2.2 [ 9.198081] initcall b1_init+0x0/0x80 returned 0 after 150 usecs [ 9.198196] calling c4_init+0x0/0xd0 @ 1 [ 9.198370] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00 [ 9.198838] c4: revision 1.1.2.2 [ 9.198987] initcall c4_init+0x0/0xd0 returned 0 after 657 usecs [ 9.199118] calling pci_eisa_init_module+0x0/0x20 @ 1 [ 9.199528] initcall pci_eisa_init_module+0x0/0x20 returned 0 after 288 usecs [ 9.199645] calling init_ladder+0x0/0x10 @ 1 [ 9.199757] cpuidle: using governor ladder [ 9.199869] initcall init_ladder+0x0/0x10 returned 0 after 110 usecs [ 9.200045] calling memstick_init+0x0/0x90 @ 1 [ 9.200756] initcall memstick_init+0x0/0x90 returned 0 after 582 usecs [ 9.200873] calling mspro_block_init+0x0/0x90 @ 1 [ 9.201343] initcall mspro_block_init+0x0/0x90 returned 0 after 307 usecs [ 9.201461] calling jmb38x_ms_init+0x0/0x20 @ 1 [ 9.201952] initcall jmb38x_ms_init+0x0/0x20 returned 0 after 368 usecs [ 9.202097] calling heartbeat_trig_init+0x0/0x10 @ 1 [ 9.202214] initcall heartbeat_trig_init+0x0/0x10 returned 0 after 2 usecs [ 9.202340] calling bl_trig_init+0x0/0x10 @ 1 [ 9.202458] initcall bl_trig_init+0x0/0x10 returned 0 after 3 usecs [ 9.202572] calling ib_core_init+0x0/0x40 @ 1 [ 9.202943] initcall ib_core_init+0x0/0x40 returned 0 after 252 usecs [ 9.203080] calling ib_mad_init_module+0x0/0xb0 @ 1 [ 9.203233] initcall ib_mad_init_module+0x0/0xb0 returned 0 after 37 usecs [ 9.203351] calling ib_sa_init+0x0/0x90 @ 1 [ 9.203553] initcall ib_sa_init+0x0/0x90 returned 0 after 87 usecs [ 9.203669] calling ib_cm_init+0x0/0x140 @ 1 [ 9.204402] initcall ib_cm_init+0x0/0x140 returned 0 after 604 usecs [ 9.204519] calling iw_cm_init+0x0/0x40 @ 1 [ 9.204710] initcall iw_cm_init+0x0/0x40 returned 0 after 75 usecs [ 9.204826] calling nes_init_module+0x0/0x140 @ 1 [ 9.205573] initcall nes_init_module+0x0/0x140 returned 0 after 585 usecs [ 9.205690] calling dcdrbu_init+0x0/0x140 @ 1 [ 9.205936] PM: Adding info for platform:dell_rbu [ 9.206351] initcall dcdrbu_init+0x0/0x140 returned 0 after 527 usecs [ 9.206468] calling init_hrt_clocksource+0x0/0x190 @ 1 [ 9.206584] initcall init_hrt_clocksource+0x0/0x190 returned -19 after 1 usecs [ 9.206734] calling dell_wmi_init+0x0/0x130 @ 1 [ 9.206847] dell-wmi: No known WMI GUID found [ 9.207031] initcall dell_wmi_init+0x0/0x130 returned 0 after 178 usecs [ 9.207146] calling acer_wmi_init+0x0/0x580 @ 1 [ 9.207258] acer-wmi: Acer Laptop ACPI-WMI Extras [ 9.207377] acer-wmi: No or unsupported WMI interface, unable to load [ 9.207494] initcall acer_wmi_init+0x0/0x580 returned -19 after 228 usecs [ 9.207608] calling thinkpad_acpi_module_init+0x0/0xaa0 @ 1 [ 9.208779] PM: Adding info for platform:thinkpad_acpi [ 9.209307] PM: Adding info for platform:thinkpad_hwmon [ 9.209903] PM: Adding info for No Bus:hwmon0 [ 9.210297] thinkpad_acpi: ThinkPad ACPI Extras v0.23 [ 9.210411] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 9.210523] thinkpad_acpi: ThinkPad BIOS 79ET56WW (1.02 ), EC 79HT42WW-1.01 [ 9.210638] thinkpad_acpi: Lenovo ThinkPad T60, model 1951A26 [ 9.211965] thinkpad_acpi: radio switch found; radios are disabled [ 9.226445] evbug.c: Event. Dev: input2, Type: 0, Code: 0, Value: 0 [ 9.254206] PM: Adding info for No Bus:tpacpi::thinklight [ 9.255084] Registered led device: tpacpi::thinklight [ 9.255418] PM: Adding info for No Bus:tpacpi::power [ 9.255786] Registered led device: tpacpi::power [ 9.256091] PM: Adding info for No Bus:tpacpi:orange:batt [ 9.256462] Registered led device: tpacpi:orange:batt [ 9.256705] PM: Adding info for No Bus:tpacpi:green:batt [ 9.257043] hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000 [ 9.257192] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s [ 9.257397] Registered led device: tpacpi:green:batt [ 9.257642] PM: Adding info for No Bus:tpacpi::dock_active [ 9.258063] Registered led device: tpacpi::dock_active [ 9.258322] PM: Adding info for No Bus:tpacpi::bay_active [ 9.258694] Registered led device: tpacpi::bay_active [ 9.258968] PM: Adding info for No Bus:tpacpi::dock_batt [ 9.259391] Registered led device: tpacpi::dock_batt [ 9.259641] PM: Adding info for No Bus:tpacpi::unknown_led [ 9.260059] Registered led device: tpacpi::unknown_led [ 9.260313] PM: Adding info for No Bus:tpacpi::standby [ 9.260681] Registered led device: tpacpi::standby [ 9.260959] PM: Adding info for No Bus:tpacpi::dock_status1 [ 9.262148] Registered led device: tpacpi::dock_status1 [ 9.262408] PM: Adding info for No Bus:tpacpi::dock_status2 [ 9.262777] Registered led device: tpacpi::dock_status2 [ 9.263075] PM: Adding info for No Bus:tpacpi::unknown_led2 [ 9.263447] Registered led device: tpacpi::unknown_led2 [ 9.263697] PM: Adding info for No Bus:tpacpi::unknown_led3 [ 9.264115] Registered led device: tpacpi::unknown_led3 [ 9.264379] PM: Adding info for No Bus:tpacpi::thinkvantage [ 9.264753] Registered led device: tpacpi::thinkvantage [ 9.264895] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled [ 9.267665] PM: Adding info for No Bus:thinkpad_screen [ 9.268603] PM: Adding info for No Bus:input3 [ 9.268972] input: ThinkPad Extra Buttons as /class/input/input3 [ 9.269124] evbug.c: Connected device: input3 (ThinkPad Extra Buttons at thinkpad_acpi/input0) [ 9.269297] initcall thinkpad_acpi_module_init+0x0/0xaa0 returned 0 after 60126 usecs [ 9.269450] calling acpi_pcc_init+0x0/0x30 @ 1 [ 9.269878] initcall acpi_pcc_init+0x0/0x30 returned 0 after 306 usecs [ 9.269994] calling flow_cache_init+0x0/0x180 @ 1 [ 9.270169] initcall flow_cache_init+0x0/0x180 returned 0 after 44 usecs [ 9.270290] calling llc_init+0x0/0x20 @ 1 [ 9.270405] initcall llc_init+0x0/0x20 returned 0 after 3 usecs [ 9.270519] calling llc2_init+0x0/0xd0 @ 1 [ 9.270800] NET: Registered protocol family 26 [ 9.270968] initcall llc2_init+0x0/0xd0 returned 0 after 329 usecs [ 9.271103] calling snap_init+0x0/0x40 @ 1 [ 9.271221] initcall snap_init+0x0/0x40 returned 0 after 6 usecs [ 9.271339] calling blackhole_module_init+0x0/0x10 @ 1 [ 9.271455] initcall blackhole_module_init+0x0/0x10 returned 0 after 2 usecs [ 9.271570] calling gact_init_module+0x0/0x20 @ 1 [ 9.271680] GACT probability on [ 9.271790] initcall gact_init_module+0x0/0x20 returned 0 after 105 usecs [ 9.271957] calling mirred_init_module+0x0/0x20 @ 1 [ 9.272085] Mirror/redirect action on [ 9.272196] initcall mirred_init_module+0x0/0x20 returned 0 after 107 usecs [ 9.272319] calling pedit_init_module+0x0/0x10 @ 1 [ 9.272433] initcall pedit_init_module+0x0/0x10 returned 0 after 1 usecs [ 9.272548] calling skbedit_init_module+0x0/0x10 @ 1 [ 9.272662] initcall skbedit_init_module+0x0/0x10 returned 0 after 1 usecs [ 9.272776] calling htb_module_init+0x0/0x10 @ 1 [ 9.272942] initcall htb_module_init+0x0/0x10 returned 0 after 1 usecs [ 9.273071] calling sfq_module_init+0x0/0x10 @ 1 [ 9.273190] initcall sfq_module_init+0x0/0x10 returned 0 after 1 usecs [ 9.273309] calling tbf_module_init+0x0/0x10 @ 1 [ 9.273423] initcall tbf_module_init+0x0/0x10 returned 0 after 1 usecs [ 9.273537] calling teql_init+0x0/0xc0 @ 1 [ 9.274115] PM: Adding info for No Bus:teql0 [ 9.275038] initcall teql_init+0x0/0xc0 returned 0 after 1356 usecs [ 9.275154] calling multiq_module_init+0x0/0x10 @ 1 [ 9.275270] initcall multiq_module_init+0x0/0x10 returned 0 after 1 usecs [ 9.275386] calling netem_module_init+0x0/0x20 @ 1 [ 9.275497] netem: version 1.2 [ 9.275608] initcall netem_module_init+0x0/0x20 returned 0 after 106 usecs [ 9.275723] calling init_route4+0x0/0x10 @ 1 [ 9.275885] initcall init_route4+0x0/0x10 returned 0 after 2 usecs [ 9.275998] calling cls_flow_init+0x0/0x10 @ 1 [ 9.276127] initcall cls_flow_init+0x0/0x10 returned 0 after 1 usecs [ 9.276243] calling init_em_cmp+0x0/0x10 @ 1 [ 9.276359] initcall init_em_cmp+0x0/0x10 returned 0 after 2 usecs [ 9.276474] calling init_em_u32+0x0/0x10 @ 1 [ 9.276592] initcall init_em_u32+0x0/0x10 returned 0 after 1 usecs [ 9.276706] calling nfnetlink_init+0x0/0x70 @ 1 [ 9.276818] Netfilter messages via NETLINK v0.30. [ 9.277034] initcall nfnetlink_init+0x0/0x70 returned 0 after 207 usecs [ 9.277150] calling nfnetlink_log_init+0x0/0xe0 @ 1 [ 9.277290] initcall nfnetlink_log_init+0x0/0xe0 returned 0 after 25 usecs [ 9.277405] calling xt_init+0x0/0x140 @ 1 [ 9.277524] initcall xt_init+0x0/0x140 returned 0 after 8 usecs [ 9.277636] calling tcpudp_mt_init+0x0/0x20 @ 1 [ 9.277752] initcall tcpudp_mt_init+0x0/0x20 returned 0 after 4 usecs [ 9.277916] calling mark_mt_init+0x0/0x20 @ 1 [ 9.278046] initcall mark_mt_init+0x0/0x20 returned 0 after 2 usecs [ 9.278159] calling policy_mt_init+0x0/0x20 @ 1 [ 9.278274] initcall policy_mt_init+0x0/0x20 returned 0 after 2 usecs [ 9.278388] calling sysctl_ipv4_init+0x0/0x50 @ 1 [ 9.279411] initcall sysctl_ipv4_init+0x0/0x50 returned 0 after 889 usecs [ 9.279526] calling init_syncookies+0x0/0x20 @ 1 [ 9.279684] initcall init_syncookies+0x0/0x20 returned 0 after 44 usecs [ 9.279799] calling ah4_init+0x0/0x70 @ 1 [ 9.279948] initcall ah4_init+0x0/0x70 returned 0 after 3 usecs [ 9.280077] calling esp4_init+0x0/0x70 @ 1 [ 9.280191] initcall esp4_init+0x0/0x70 returned 0 after 2 usecs [ 9.280309] calling ipcomp4_init+0x0/0x70 @ 1 [ 9.280424] initcall ipcomp4_init+0x0/0x70 returned 0 after 3 usecs [ 9.280537] calling ipip_init+0x0/0xb0 @ 1 [ 9.280651] initcall ipip_init+0x0/0xb0 returned 0 after 3 usecs [ 9.280764] calling xfrm4_beet_init+0x0/0x20 @ 1 [ 9.280927] initcall xfrm4_beet_init+0x0/0x20 returned 0 after 2 usecs [ 9.281056] calling tunnel4_init+0x0/0x70 @ 1 [ 9.281175] initcall tunnel4_init+0x0/0x70 returned 0 after 2 usecs [ 9.281292] calling ipv4_netfilter_init+0x0/0x10 @ 1 [ 9.281409] initcall ipv4_netfilter_init+0x0/0x10 returned 0 after 3 usecs [ 9.281524] calling hybla_register+0x0/0x10 @ 1 [ 9.281636] TCP hybla registered [ 9.281745] initcall hybla_register+0x0/0x10 returned 0 after 106 usecs [ 9.281909] calling htcp_register+0x0/0x10 @ 1 [ 9.282036] TCP htcp registered [ 9.282147] initcall htcp_register+0x0/0x10 returned 0 after 107 usecs [ 9.282262] calling tcp_veno_register+0x0/0x20 @ 1 [ 9.282378] TCP veno registered [ 9.282489] initcall tcp_veno_register+0x0/0x20 returned 0 after 107 usecs [ 9.282603] calling tcp_lp_register+0x0/0x10 @ 1 [ 9.282714] TCP lp registered [ 9.282873] initcall tcp_lp_register+0x0/0x10 returned 0 after 153 usecs [ 9.282987] calling packet_init+0x0/0x40 @ 1 [ 9.283115] NET: Registered protocol family 17 [ 9.283249] initcall packet_init+0x0/0x40 returned 0 after 130 usecs [ 9.283365] calling ipsec_pfkey_init+0x0/0x80 @ 1 [ 9.283481] NET: Registered protocol family 15 [ 9.283691] initcall ipsec_pfkey_init+0x0/0x80 returned 0 after 204 usecs [ 9.283808] calling dsa_init_module+0x0/0x20 @ 1 [ 9.283973] initcall dsa_init_module+0x0/0x20 returned 0 after 2 usecs [ 9.284108] calling mv88e6131_init+0x0/0x20 @ 1 [ 9.284225] initcall mv88e6131_init+0x0/0x20 returned 0 after 3 usecs [ 9.284344] calling dsa_init_module+0x0/0x10 @ 1 [ 9.284723] initcall dsa_init_module+0x0/0x10 returned 0 after 259 usecs [ 9.284876] calling phonet_init+0x0/0x80 @ 1 [ 9.285041] NET: Registered protocol family 35 [ 9.285214] initcall phonet_init+0x0/0x80 returned 0 after 218 usecs [ 9.285336] calling pep_register+0x0/0x20 @ 1 [ 9.285472] initcall pep_register+0x0/0x20 returned 0 after 22 usecs [ 9.285587] calling dccp_init+0x0/0x380 @ 1 [ 9.292737] CCID: Activated CCID 2 (TCP-like) [ 9.292932] CCID: Activated CCID 3 (TCP-Friendly Rate Control) [ 9.293121] initcall dccp_init+0x0/0x380 returned 0 after 7241 usecs [ 9.293238] calling dccp_v4_init+0x0/0x80 @ 1 [ 9.294681] initcall dccp_v4_init+0x0/0x80 returned 0 after 1291 usecs [ 9.294798] calling lib80211_init+0x0/0x20 @ 1 [ 9.294909] lib80211: common routines for IEEE802.11 drivers [ 9.295047] lib80211_crypt: registered algorithm 'NULL' [ 9.295162] initcall lib80211_init+0x0/0x20 returned 0 after 244 usecs [ 9.295280] calling dcbnl_init+0x0/0x40 @ 1 [ 9.295397] initcall dcbnl_init+0x0/0x40 returned 0 after 1 usecs [ 9.295512] calling severities_debugfs_init+0x0/0x60 @ 1 [ 9.295677] initcall severities_debugfs_init+0x0/0x60 returned 0 after 48 usecs [ 9.295891] calling centrino_init+0x0/0x30 @ 1 [ 9.296047] initcall centrino_init+0x0/0x30 returned -19 after 26 usecs [ 9.296163] calling update_mp_table+0x0/0x490 @ 1 [ 9.296279] initcall update_mp_table+0x0/0x490 returned 0 after 1 usecs [ 9.296393] calling lapic_insert_resource+0x0/0x50 @ 1 [ 9.296514] initcall lapic_insert_resource+0x0/0x50 returned 0 after 6 usecs [ 9.296630] calling print_ipi_mode+0x0/0x30 @ 1 [ 9.296741] Using IPI No-Shortcut mode [ 9.296904] initcall print_ipi_mode+0x0/0x30 returned 0 after 158 usecs [ 9.297035] calling init_lapic_nmi_sysfs+0x0/0x40 @ 1 [ 9.297150] initcall init_lapic_nmi_sysfs+0x0/0x40 returned 0 after 1 usecs [ 9.297265] calling io_apic_bug_finalize+0x0/0x20 @ 1 [ 9.297381] initcall io_apic_bug_finalize+0x0/0x20 returned 0 after 1 usecs [ 9.297497] calling check_early_ioremap_leak+0x0/0x70 @ 1 [ 9.297614] initcall check_early_ioremap_leak+0x0/0x70 returned 0 after 1 usecs [ 9.297766] calling init_oops_id+0x0/0x50 @ 1 [ 9.297936] initcall init_oops_id+0x0/0x50 returned 0 after 6 usecs [ 9.298075] calling disable_boot_consoles+0x0/0x50 @ 1 [ 9.298191] initcall disable_boot_consoles+0x0/0x50 returned 0 after 1 usecs [ 9.298309] calling pm_qos_power_init+0x0/0x80 @ 1 [ 9.298881] PM: Adding info for No Bus:cpu_dma_latency [ 9.299433] PM: Adding info for No Bus:network_latency [ 9.299944] PM: Adding info for No Bus:network_throughput [ 9.300338] initcall pm_qos_power_init+0x0/0x80 returned 0 after 1870 usecs [ 9.300457] calling debugfs_kprobe_init+0x0/0x90 @ 1 [ 9.300617] initcall debugfs_kprobe_init+0x0/0x90 returned 0 after 43 usecs [ 9.300733] calling clear_boot_tracer+0x0/0x30 @ 1 [ 9.300884] initcall clear_boot_tracer+0x0/0x30 returned 0 after 1 usecs [ 9.301000] calling max_swapfiles_check+0x0/0x10 @ 1 [ 9.301132] initcall max_swapfiles_check+0x0/0x10 returned 0 after 1 usecs [ 9.301246] calling kmemleak_late_init+0x0/0x90 @ 1 [ 9.301451] kmemleak: Kernel memory leak detector initialized [ 9.301454] kmemleak: Automatic memory scanning thread started [ 9.301677] initcall kmemleak_late_init+0x0/0x90 returned 0 after 309 usecs [ 9.301794] calling random32_reseed+0x0/0x90 @ 1 [ 9.301976] initcall random32_reseed+0x0/0x90 returned 0 after 17 usecs [ 9.302139] calling pci_resource_alignment_sysfs_init+0x0/0x20 @ 1 [ 9.302270] initcall pci_resource_alignment_sysfs_init+0x0/0x20 returned 0 after 11 usecs [ 9.302423] calling pci_sysfs_init+0x0/0x60 @ 1 [ 9.303286] initcall pci_sysfs_init+0x0/0x60 returned 0 after 731 usecs [ 9.304194] calling regulator_init_complete+0x0/0x150 @ 1 [ 9.304317] initcall regulator_init_complete+0x0/0x150 returned 0 after 2 usecs [ 9.304474] calling seqgen_init+0x0/0x10 @ 1 [ 9.304607] initcall seqgen_init+0x0/0x10 returned 0 after 21 usecs [ 9.304724] calling late_resume_init+0x0/0x110 @ 1 [ 9.304878] Magic number: 5:535:397 [ 9.305174] tty ttyD75: hash matches [ 9.305452] mem random: hash matches [ 9.305596] initcall late_resume_init+0x0/0x110 returned 0 after 699 usecs [ 9.305712] calling hd_init+0x0/0x360 @ 1 [ 9.305938] hd: no drives specified - use hd=cyl,head,sectors on kernel command line [ 9.306149] initcall hd_init+0x0/0x360 returned -1 after 281 usecs [ 9.306265] initcall hd_init+0x0/0x360 returned with error code -1 [ 9.306380] calling scsi_complete_async_scans+0x0/0x150 @ 1 [ 9.306498] initcall scsi_complete_async_scans+0x0/0x150 returned 0 after 1 usecs [ 9.306651] calling rtc_hctosys+0x0/0x160 @ 1 [ 9.306768] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 9.306934] initcall rtc_hctosys+0x0/0x160 returned -19 after 162 usecs [ 9.307065] calling memmap_init+0x0/0xb0 @ 1 [ 9.307769] initcall memmap_init+0x0/0xb0 returned 0 after 576 usecs [ 9.307911] calling init_net_drop_monitor+0x0/0x150 @ 1 [ 9.308043] Initalizing network drop monitor service [ 9.308346] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion [ 9.308489] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003801 POWER OWNER sig=j CONNECT [ 9.308678] hub 1-0:1.0: port 8 not reset yet, waiting 50ms [ 9.308921] initcall init_net_drop_monitor+0x0/0x150 returned 0 after 856 usecs [ 9.309127] calling tcp_congestion_default+0x0/0x10 @ 1 [ 9.309246] initcall tcp_congestion_default+0x0/0x10 returned 0 after 2 usecs [ 9.309366] calling ip_auto_config+0x0/0xfc0 @ 1 [ 9.309504] initcall ip_auto_config+0x0/0xfc0 returned 0 after 26 usecs [ 9.309618] calling initialize_hashrnd+0x0/0x20 @ 1 [ 9.309739] initcall initialize_hashrnd+0x0/0x20 returned 0 after 6 usecs [ 9.309927] async_waiting @ 1 [ 9.310056] async_continuing @ 1 after 2 usec [ 9.359040] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 003002 POWER OWNER sig=se0 CSC [ 9.359318] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.359467] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100 [ 9.359696] kjournald starting. Commit interval 5 seconds [ 9.359727] EXT3-fs: mounted filesystem with ordered data mode. [ 9.359755] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 9.359819] async_waiting @ 1 [ 9.359825] async_continuing @ 1 after 1 usec [ 9.359828] debug: unmapping init memory c18c5000..c1a8e000 [ 9.454066] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 9.454209] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00 [ 9.454379] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 9.486062] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. [ 9.558045] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 9.660046] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 9.780018] usb 5-2: ep0 maxpacket = 8 [ 9.803698] usb 5-2: default language 0x0409 [ 9.822710] usb 5-2: udev 2, busnum 5, minor = 513 [ 9.822829] usb 5-2: New USB device found, idVendor=0483, idProduct=2016 [ 9.822951] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.823088] usb 5-2: Product: Biometric Coprocessor [ 9.823208] usb 5-2: Manufacturer: STMicroelectronics [ 9.823866] PM: Adding info for usb:5-2 [ 9.824108] usb 5-2: uevent [ 9.824529] usb 5-2: usb_probe_device [ 9.824653] usb 5-2: configuration #1 chosen from 1 choice [ 9.827710] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 9.828116] PM: Adding info for usb:5-2:1.0 [ 9.828273] usb 5-2:1.0: uevent [ 9.828810] usbtest 5-2:1.0: usb_probe_interface [ 9.828945] usbtest 5-2:1.0: usb_probe_interface - got id [ 9.829479] PM: Adding info for No Bus:ep_81 [ 9.829947] PM: Adding info for No Bus:ep_02 [ 9.830317] PM: Adding info for No Bus:ep_83 [ 9.830725] PM: Adding info for No Bus:usbdev5.2 [ 9.831155] drivers/usb/core/inode.c: creating file '002' [ 9.831505] PM: Adding info for No Bus:ep_00 [ 9.831631] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 10.204051] usb usb2: suspend_rh (auto-stop) [ 10.204215] usb usb3: suspend_rh (auto-stop) [ 10.204379] usb usb4: suspend_rh (auto-stop) [ 11.704042] hub 2-0:1.0: hub_suspend [ 11.704179] usb usb2: bus auto-suspend [ 11.704296] usb usb2: suspend_rh [ 11.704433] hub 3-0:1.0: hub_suspend [ 11.704550] usb usb3: bus auto-suspend [ 11.704668] usb usb3: suspend_rh [ 11.704804] hub 4-0:1.0: hub_suspend [ 11.704924] usb usb4: bus auto-suspend [ 11.705062] usb usb4: suspend_rh [ 11.705330] hub 1-0:1.0: hub_suspend [ 11.705450] usb usb1: bus auto-suspend [ 11.705567] ehci_hcd 0000:00:1d.7: suspend root hub [ 69.087846] udevd version 127 started [ 69.671810] usb usb2: uevent [ 69.671903] usb 2-0:1.0: uevent [ 69.672128] usb usb3: uevent [ 69.672344] usb 3-0:1.0: uevent [ 69.672720] usb usb4: uevent [ 69.672953] usb 4-0:1.0: uevent [ 69.673327] usb usb5: uevent [ 69.673546] usb 5-0:1.0: uevent [ 69.673818] usb 5-2: uevent [ 69.674203] usb 5-2:1.0: uevent [ 69.674580] usb usb1: uevent [ 69.674802] usb 1-0:1.0: uevent [ 69.705803] Warning: dev (tty1) tty->count(4) != #fd's(3) in tty_release_dev [ 69.991557] Warning: dev (tty1) tty->count(4) != #fd's(3) in tty_release_dev [ 70.133322] Warning: dev (tty1) tty->count(4) != #fd's(3) in tty_release_dev [ 70.275401] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 70.550423] Warning: dev (tty1) tty->count(4) != #fd's(3) in tty_release_dev [ 70.951606] Warning: dev (tty1) tty->count(10) != #fd's(9) in tty_release_dev [ 70.951865] Warning: dev (tty1) tty->count(11) != #fd's(10) in tty_release_dev [ 71.089998] Warning: dev (tty1) tty->count(4) != #fd's(3) in tty_release_dev [ 71.269651] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 71.270153] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 71.413123] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 71.413843] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.044655] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.066937] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.093997] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.117835] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.164335] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.213832] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.256087] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.366249] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.369702] Warning: dev (tty1) tty->count(4) != #fd's(3) in tty_release_dev [ 72.374754] Warning: dev (tty1) tty->count(4) != #fd's(3) in tty_release_dev [ 72.441678] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 72.507837] Warning: dev (tty1) tty->count(6) != #fd's(5) in tty_release_dev [ 72.533223] Warning: dev (tty1) tty->count(6) != #fd's(5) in tty_release_dev [ 72.625930] Warning: dev (tty1) tty->count(6) != #fd's(5) in tty_release_dev [ 72.630936] Warning: dev (tty1) tty->count(7) != #fd's(6) in tty_release_dev [ 72.800570] Warning: dev (tty1) tty->count(6) != #fd's(5) in tty_release_dev [ 72.805231] Warning: dev (tty1) tty->count(6) != #fd's(5) in tty_release_dev [ 72.818270] loadkeys used greatest stack depth: 792 bytes left [ 73.184460] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 73.746193] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 73.975089] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.139967] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.178181] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.199863] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.201141] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.210271] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.262115] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.313972] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.336756] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.349931] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.402295] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.458213] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.458739] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.479365] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.583896] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.611121] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.648035] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.650056] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.672278] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.696078] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.697359] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.722086] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.722397] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.743478] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.783873] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.866064] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.896742] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.918553] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.966126] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 74.966632] Warning: dev (tty1) tty->count(5) != #fd's(4) in tty_release_dev [ 75.010404] Warning: dev (tty1) tty->count(7) != #fd's(6) in tty_release_dev [ 75.011769] Warning: dev (tty1) tty->count(10) != #fd's(9) in tty_release_dev [ 75.012303] Warning: dev (tty1) tty->count(10) != #fd's(9) in tty_release_dev [ 75.013592] Warning: dev (tty1) tty->count(10) != #fd's(9) in tty_release_dev [ 75.014081] Warning: dev (tty1) tty->count(10) != #fd's(9) in tty_release_dev [ 75.014573] Warning: dev (tty1) tty->count(10) != #fd's(9) in tty_release_dev [ 75.014849] Warning: dev (tty1) tty->count(10) != #fd's(9) in tty_release_dev [ 79.735900] kmemleak: 15 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 96.717991] IPv4 FIB: Using LC-trie version 0.408 [ 162.557802] EXT3 FS on sda1, internal journal [ 164.798005] Adding 4096564k swap on /dev/sda2. Priority:-1 extents:1 across:4096564k [ 180.301620] PM: Adding info for No Bus:vcs8 [ 180.301866] PM: Adding info for No Bus:vcsa8 [ 180.303174] PM: Adding info for No Bus:vcs4 [ 180.303428] PM: Adding info for No Bus:vcsa4 [ 180.304898] PM: Adding info for No Bus:vcs3 [ 180.305135] PM: Adding info for No Bus:vcsa3 [ 180.306360] PM: Adding info for No Bus:vcs10 [ 180.306601] PM: Adding info for No Bus:vcsa10 [ 180.308007] PM: Adding info for No Bus:vcs9 [ 180.308240] PM: Adding info for No Bus:vcsa9 [ 180.353266] PM: Adding info for No Bus:vcs6 [ 180.353506] PM: Adding info for No Bus:vcsa6 [ 180.354065] PM: Adding info for No Bus:vcs2 [ 180.354342] PM: Adding info for No Bus:vcsa2 [ 180.355728] PM: Adding info for No Bus:vcs11 [ 180.355961] PM: Adding info for No Bus:vcsa11 [ 180.356669] PM: Adding info for No Bus:vcs5 [ 180.356900] PM: Adding info for No Bus:vcsa5 [ 180.357585] PM: Adding info for No Bus:vcs7 [ 180.357820] PM: Adding info for No Bus:vcsa7 [ 1295.596466] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 2511.564568] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 3119.550078] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 3727.521955] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 4335.441675] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 5551.291720] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 6767.178293] kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 7375.105563] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 8590.954210] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 9198.878163] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [10414.730095] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [15278.333097] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [15886.267970] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [16494.201503] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [18318.001954] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [21357.673340] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [23205.818058] kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [23838.141986] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [25734.400245] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [26366.474613] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [27630.623886] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [28262.700037] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [30159.152950] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [30791.425441] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [31423.499238] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [32055.576537] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [33319.726227] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [33951.800407] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [34584.155586] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [35216.271372] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [35848.382003] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [36480.491299] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [37112.616569] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [37744.799710] kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [39009.189672] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [39641.426505] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [40273.539884] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [41537.770046] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [42802.152102] kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [43434.263250] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [44066.373177] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [44698.476800] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [45330.577701] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [45962.678294] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [46594.781002] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [47226.922484] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [47859.179511] kmemleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [48491.248780] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [50387.455083] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)