From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Hemminger Subject: [PATCH] sky2: fix receive length error in mixed non-VLAN/VLAN traffic Date: Fri, 27 Apr 2012 20:03:10 -0700 Message-ID: <20120427200310.60325fb1@nehalam.linuxnetplumber.net> References: <4F9AFE4E.8010108@linuxsystems.it> <20120427134127.6d536a96@nehalam.linuxnetplumber.net> <20120427135514.48b03ce8@nehalam.linuxnetplumber.net> <4F9B2641.9070209@linuxsystems.it> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org To: =?ISO-8859-1?B?TmljY29s8g==?= Belli Return-path: Received: from mail.vyatta.com ([76.74.103.46]:36105 "EHLO mail.vyatta.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758967Ab2D1DDR (ORCPT ); Fri, 27 Apr 2012 23:03:17 -0400 In-Reply-To: <4F9B2641.9070209@linuxsystems.it> Sender: netdev-owner@vger.kernel.org List-ID: Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: The driver uses only VLAN information included in VLAN status list elements, that signals that the VLAN tag field is valid. It must ignore the VLAN bit in the MAC RX Status Word. An additional variable set when evaluating the VLAN opcodes is used to indicate that the received packet is a VLAN packet and a packet length correction (subtraction of VLAN header length) must be done. This is an alternative to Mirko's patch that relies on the new method of encoding VLAN tag, and therefore means extra code can be removed. Testing: Tested with regular and VLAN traffic on 88E8056, but this chip does not have the bug, just proves that the alternative method of handling VLAN tag will work. Reported-by: Mirko Lindner Signed-off-by: Stephen Hemminger --- This version is built and tested against net-next (3.4-rc4) --- a/drivers/net/ethernet/marvell/sky2.c 2012-04-27 19:37:31.891137630 -0700 +++ b/drivers/net/ethernet/marvell/sky2.c 2012-04-27 19:42:54.242757283 -0700 @@ -2568,6 +2568,14 @@ nobuf: return NULL; } +/* Apply vlan tag to the current Rx skb */ +static inline void sky2_rx_tag(struct sky2_port *sky2, u16 tag) +{ + struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; + + __vlan_hwaccel_put_tag(re->skb, be16_to_cpu(tag)); +} + /* * Receive one packet. * For larger packets, get new buffer. @@ -2580,7 +2588,7 @@ static struct sk_buff *sky2_receive(stru struct sk_buff *skb = NULL; u16 count = (status & GMR_FS_LEN) >> 16; - if (status & GMR_FS_VLAN) + if (vlan_tx_tag_present(re->skb)) count -= VLAN_HLEN; /* Account for vlan tag */ netif_printk(sky2, rx_status, KERN_DEBUG, dev, @@ -2646,12 +2654,9 @@ static inline void sky2_tx_done(struct n } } -static inline void sky2_skb_rx(const struct sky2_port *sky2, - u32 status, struct sk_buff *skb) +static inline void sky2_skb_rx(struct sky2_port *sky2, + struct sk_buff *skb) { - if (status & GMR_FS_VLAN) - __vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag)); - if (skb->ip_summed == CHECKSUM_NONE) netif_receive_skb(skb); else @@ -2764,7 +2769,7 @@ static int sky2_status_intr(struct sky2_ skb->protocol = eth_type_trans(skb, dev); - sky2_skb_rx(sky2, status, skb); + sky2_skb_rx(sky2, skb); /* Stop after net poll weight */ if (++work_done >= to_do) @@ -2772,11 +2777,11 @@ static int sky2_status_intr(struct sky2_ break; case OP_RXVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); break; case OP_RXCHKSVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); /* fall through */ case OP_RXCHKS: if (likely(dev->features & NETIF_F_RXCSUM)) --- a/drivers/net/ethernet/marvell/sky2.h 2012-04-27 19:37:31.891137630 -0700 +++ b/drivers/net/ethernet/marvell/sky2.h 2012-04-27 19:41:01.857495110 -0700 @@ -2241,7 +2241,6 @@ struct sky2_port { u16 rx_pending; u16 rx_data_size; u16 rx_nfrags; - u16 rx_tag; struct { unsigned long last;