From: Yann Vernier <yann.vernier@orsoc.se>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed
Date: Thu, 9 Aug 2012 15:33:06 +0200 [thread overview]
Message-ID: <20120809153306.5277492c@latmask.vernier.se> (raw)
In-Reply-To: <20120706133342.47ace724@aari01-12>
Just use the existing #define instead of magic number.
Signed-off-by: Yann Vernier <yann.vernier@orsoc.se>
---
arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S index 31b028b..ba37c28
100644 --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
+++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
@@ -199,8 +199,8 @@ highflash:
/*
* set pll to top speed
*/
- ldr r1, =(KS8695_IO_BASE+KS8695_SYSTEN_BUS_CLOCK)
- mov r2, #0
+ ldr r1, =(KS8695_IO_BASE+KS8695_SYSTEM_BUS_CLOCK)
+ mov r2, #KS8695_BUS_CLOCK_125MHZ
str r2, [r1] /* set pll clock to 166MHz
*/
ldr r1, =(KS8695_IO_BASE+KS8695_SWITCH_CTRL0)
--
1.7.10.4
next prev parent reply other threads:[~2012-08-09 13:33 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 8:05 [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support Yann Vernier
2012-07-05 9:48 ` Andreas Bießmann
2012-07-05 13:11 ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: " Yann Vernier
2012-07-05 15:04 ` Andreas Bießmann
2012-07-06 8:27 ` [U-Boot] [PATCH v3] " Yann Vernier
2012-07-06 8:47 ` Andreas Bießmann
2012-07-06 11:33 ` Albert ARIBAUD
2012-08-09 13:33 ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized Yann Vernier
2012-10-04 9:15 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-10-26 21:34 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-10-18 18:57 ` Albert ARIBAUD
2012-11-19 11:55 ` [U-Boot] [PATCH] " Yann Vernier
2012-11-19 12:29 ` Yann Vernier
2012-11-20 0:05 ` Marek Vasut
2012-10-05 12:09 ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-10-18 19:00 ` Albert ARIBAUD
2012-10-18 20:55 ` Joe Hershberger
2012-10-19 8:02 ` Yann Vernier
2012-10-26 21:37 ` Albert ARIBAUD
2012-11-19 11:42 ` Yann Vernier
2012-12-01 19:23 ` Joe Hershberger
2012-10-05 12:09 ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-10-18 19:09 ` Albert ARIBAUD
2012-10-19 8:08 ` Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-10-18 19:11 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-10-18 19:13 ` Albert ARIBAUD
2012-10-05 12:09 ` [U-Boot] [PATCH 10/11] arm: ks8695: document bus speed Yann Vernier
2012-10-05 12:09 ` [U-Boot] [PATCH 11/11] arm: cm4008, cm41xx: read MAC address from flash Yann Vernier
2012-10-18 19:14 ` Albert ARIBAUD
2012-11-10 8:03 ` [U-Boot] [PATCH 00/11] ks8695 (cm4008, cm41xx) bugfixes, constant removals, configuration generalized (repost) Albert ARIBAUD
2012-11-13 12:46 ` Yann Vernier
2012-08-09 13:33 ` Yann Vernier [this message]
2012-08-09 13:33 ` [U-Boot] [PATCH 07/11] arm: ks8695/cm4008/cm41xx: Parameterize SDRAM Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 08/11] arm: cm4008, cm41xx: don't define to 1 Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 09/11] arm: ks8695/cm4xxx: don't reconfigure switch Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 05/11] arm: cm4008, cm41xx: set gd->ram_size in dram_init Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 03/11] arm: ks8695eth: Use MAC address from environment Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 04/11] arm: cm4008, cm41xx: use common cfi_flash support Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 06/11] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values Yann Vernier
2012-08-09 13:33 ` [U-Boot] [PATCH 01/11] arm: ks8695: use defined constants for UART Yann Vernier
2012-07-05 13:22 ` [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation Yann Vernier
2012-07-05 13:41 ` Yann Vernier
2012-07-05 15:19 ` Andreas Bießmann
2012-07-12 19:37 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120809153306.5277492c@latmask.vernier.se \
--to=yann.vernier@orsoc.se \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.