From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Helgaas Subject: Re: [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes Date: Tue, 5 Jan 2016 15:42:06 -0600 Message-ID: <20160105214206.GA23814@localhost> References: <1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mail.kernel.org ([198.145.29.136]:44169 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751625AbcAEVmK (ORCPT ); Tue, 5 Jan 2016 16:42:10 -0500 Content-Disposition: inline In-Reply-To: <1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org> Sender: linux-arm-msm-owner@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org To: Stanimir Varbanov Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-pci@vger.kernel.org, Bjorn Helgaas , Srinivas Kandagatla , Russell King , Rob Herring , Rob Herring , Mark Rutland , Pawel Moll , Ian Campbell , Arnd Bergmann , Jingoo Han , Pratyush Anand , Bjorn Andersson On Fri, Dec 18, 2015 at 02:38:54PM +0200, Stanimir Varbanov wrote: > Hi, > > I'm sending v5 with following changes: > - in 1/5 - replace wmb() call with PCIE_ATU_CR2 register read. > - in 3/5 - addressed comments from Born Helgaas about usage of a > standard PCI capabilities register names and rename link training > function to the way that other Designware based drivers use. > - in 5/5 - addressed a comment from Bjorn Andersson about regulator > label duplication. > > Comments are welcome! > > The previous v4 of the patch set can be found at [1]. > > regards, > Stan > > [1] https://lkml.org/lkml/2015/12/3/370 > > Stanimir Varbanov (5): > PCI: designware: ensure ATU is enabled before IO/conf space accesses > DT: PCI: qcom: Document PCIe devicetree bindings > PCI: qcom: Add Qualcomm PCIe controller driver > ARM: dts: apq8064: add pcie devicetree node > ARM: dts: ifc6410: enable pcie dt node for this board > > .../devicetree/bindings/pci/qcom,pcie.txt | 233 ++++++++ > MAINTAINERS | 7 + > arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 + > arch/arm/boot/dts/qcom-apq8064.dtsi | 36 ++ > drivers/pci/host/Kconfig | 10 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pcie-designware.c | 7 + > drivers/pci/host/pcie-qcom.c | 617 ++++++++++++++++++++ > 8 files changed, 937 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt > create mode 100644 drivers/pci/host/pcie-qcom.c Applied to pci/host-qcom for v4.5, with Pratyush's ack on the first patch. Thanks! From mboxrd@z Thu Jan 1 00:00:00 1970 From: helgaas@kernel.org (Bjorn Helgaas) Date: Tue, 5 Jan 2016 15:42:06 -0600 Subject: [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes In-Reply-To: <1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org> References: <1450442339-18765-1-git-send-email-stanimir.varbanov@linaro.org> Message-ID: <20160105214206.GA23814@localhost> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Dec 18, 2015 at 02:38:54PM +0200, Stanimir Varbanov wrote: > Hi, > > I'm sending v5 with following changes: > - in 1/5 - replace wmb() call with PCIE_ATU_CR2 register read. > - in 3/5 - addressed comments from Born Helgaas about usage of a > standard PCI capabilities register names and rename link training > function to the way that other Designware based drivers use. > - in 5/5 - addressed a comment from Bjorn Andersson about regulator > label duplication. > > Comments are welcome! > > The previous v4 of the patch set can be found at [1]. > > regards, > Stan > > [1] https://lkml.org/lkml/2015/12/3/370 > > Stanimir Varbanov (5): > PCI: designware: ensure ATU is enabled before IO/conf space accesses > DT: PCI: qcom: Document PCIe devicetree bindings > PCI: qcom: Add Qualcomm PCIe controller driver > ARM: dts: apq8064: add pcie devicetree node > ARM: dts: ifc6410: enable pcie dt node for this board > > .../devicetree/bindings/pci/qcom,pcie.txt | 233 ++++++++ > MAINTAINERS | 7 + > arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 + > arch/arm/boot/dts/qcom-apq8064.dtsi | 36 ++ > drivers/pci/host/Kconfig | 10 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pcie-designware.c | 7 + > drivers/pci/host/pcie-qcom.c | 617 ++++++++++++++++++++ > 8 files changed, 937 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt > create mode 100644 drivers/pci/host/pcie-qcom.c Applied to pci/host-qcom for v4.5, with Pratyush's ack on the first patch. Thanks!