All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andi Shyti <andi.shyti@samsung.com>
To: Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
	Sean Young <sean@mess.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Richard Purdie <rpurdie@rpsys.net>,
	Jacek Anaszewski <j.anaszewski@samsung.com>,
	Heiner Kallweit <hkallweit1@gmail.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org,
	Andi Shyti <andi.shyti@samsung.com>,
	Andi Shyti <andi@etezian.org>
Subject: [PATCH v4 2/6] [media] rc-main: split setup and unregister functions
Date: Wed, 14 Dec 2016 23:00:26 +0900	[thread overview]
Message-ID: <20161214140030.28537-3-andi.shyti@samsung.com> (raw)
In-Reply-To: <20161214140030.28537-1-andi.shyti@samsung.com>

Move the input device allocation, map and protocol handling to
different functions.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Sean Young <sean@mess.org>
---
 drivers/media/rc/rc-main.c | 143 +++++++++++++++++++++++++--------------------
 1 file changed, 81 insertions(+), 62 deletions(-)

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index a6bbceb..59fac96 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1436,16 +1436,12 @@ struct rc_dev *devm_rc_allocate_device(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_rc_allocate_device);
 
-int rc_register_device(struct rc_dev *dev)
+static int rc_setup_rx_device(struct rc_dev *dev)
 {
-	static bool raw_init = false; /* raw decoders loaded? */
-	struct rc_map *rc_map;
-	const char *path;
-	int attr = 0;
-	int minor;
 	int rc;
+	struct rc_map *rc_map;
 
-	if (!dev || !dev->map_name)
+	if (!dev->map_name)
 		return -EINVAL;
 
 	rc_map = rc_map_get(dev->map_name);
@@ -1454,6 +1450,19 @@ int rc_register_device(struct rc_dev *dev)
 	if (!rc_map || !rc_map->scan || rc_map->size == 0)
 		return -EINVAL;
 
+	rc = ir_setkeytable(dev, rc_map);
+	if (rc)
+		return rc;
+
+	if (dev->change_protocol) {
+		u64 rc_type = (1ll << rc_map->rc_type);
+
+		rc = dev->change_protocol(dev, &rc_type);
+		if (rc < 0)
+			goto out_table;
+		dev->enabled_protocols = rc_type;
+	}
+
 	set_bit(EV_KEY, dev->input_dev->evbit);
 	set_bit(EV_REP, dev->input_dev->evbit);
 	set_bit(EV_MSC, dev->input_dev->evbit);
@@ -1463,6 +1472,61 @@ int rc_register_device(struct rc_dev *dev)
 	if (dev->close)
 		dev->input_dev->close = ir_close;
 
+	/*
+	 * Default delay of 250ms is too short for some protocols, especially
+	 * since the timeout is currently set to 250ms. Increase it to 500ms,
+	 * to avoid wrong repetition of the keycodes. Note that this must be
+	 * set after the call to input_register_device().
+	 */
+	dev->input_dev->rep[REP_DELAY] = 500;
+
+	/*
+	 * As a repeat event on protocols like RC-5 and NEC take as long as
+	 * 110/114ms, using 33ms as a repeat period is not the right thing
+	 * to do.
+	 */
+	dev->input_dev->rep[REP_PERIOD] = 125;
+
+	/* rc_open will be called here */
+	rc = input_register_device(dev->input_dev);
+	if (rc)
+		goto out_table;
+
+	dev->input_dev->dev.parent = &dev->dev;
+	memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
+	dev->input_dev->phys = dev->input_phys;
+	dev->input_dev->name = dev->input_name;
+
+	return 0;
+
+out_table:
+	ir_free_table(&dev->rc_map);
+
+	return rc;
+}
+
+static void rc_free_rx_device(struct rc_dev *dev)
+{
+	if (!dev)
+		return;
+
+	ir_free_table(&dev->rc_map);
+
+	input_unregister_device(dev->input_dev);
+	dev->input_dev = NULL;
+}
+
+int rc_register_device(struct rc_dev *dev)
+{
+	static bool raw_init = false; /* raw decoders loaded? */
+	const char *path;
+	int attr = 0;
+	int minor;
+	int rc;
+
+	if (!dev)
+		return -EINVAL;
+
 	minor = ida_simple_get(&rc_ida, 0, RC_DEV_MAX, GFP_KERNEL);
 	if (minor < 0)
 		return minor;
@@ -1486,39 +1550,15 @@ int rc_register_device(struct rc_dev *dev)
 	if (rc)
 		goto out_unlock;
 
-	rc = ir_setkeytable(dev, rc_map);
-	if (rc)
-		goto out_dev;
-
-	dev->input_dev->dev.parent = &dev->dev;
-	memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
-	dev->input_dev->phys = dev->input_phys;
-	dev->input_dev->name = dev->input_name;
-
-	rc = input_register_device(dev->input_dev);
-	if (rc)
-		goto out_table;
-
-	/*
-	 * Default delay of 250ms is too short for some protocols, especially
-	 * since the timeout is currently set to 250ms. Increase it to 500ms,
-	 * to avoid wrong repetition of the keycodes. Note that this must be
-	 * set after the call to input_register_device().
-	 */
-	dev->input_dev->rep[REP_DELAY] = 500;
-
-	/*
-	 * As a repeat event on protocols like RC-5 and NEC take as long as
-	 * 110/114ms, using 33ms as a repeat period is not the right thing
-	 * to do.
-	 */
-	dev->input_dev->rep[REP_PERIOD] = 125;
-
 	path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
 	dev_info(&dev->dev, "%s as %s\n",
 		dev->input_name ?: "Unspecified device", path ?: "N/A");
 	kfree(path);
 
+	rc = rc_setup_rx_device(dev);
+	if (rc)
+		goto out_dev;
+
 	if (dev->driver_type == RC_DRIVER_IR_RAW) {
 		if (!raw_init) {
 			request_module_nowait("ir-lirc-codec");
@@ -1526,36 +1566,20 @@ int rc_register_device(struct rc_dev *dev)
 		}
 		rc = ir_raw_event_register(dev);
 		if (rc < 0)
-			goto out_input;
-	}
-
-	if (dev->change_protocol) {
-		u64 rc_type = (1ll << rc_map->rc_type);
-		rc = dev->change_protocol(dev, &rc_type);
-		if (rc < 0)
-			goto out_raw;
-		dev->enabled_protocols = rc_type;
+			goto out_rx;
 	}
 
 	/* Allow the RC sysfs nodes to be accessible */
 	atomic_set(&dev->initialized, 1);
 
-	IR_dprintk(1, "Registered rc%u (driver: %s, remote: %s, mode %s)\n",
+	IR_dprintk(1, "Registered rc%u (driver: %s)\n",
 		   dev->minor,
-		   dev->driver_name ? dev->driver_name : "unknown",
-		   rc_map->name ? rc_map->name : "unknown",
-		   dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked");
+		   dev->driver_name ? dev->driver_name : "unknown");
 
 	return 0;
 
-out_raw:
-	if (dev->driver_type == RC_DRIVER_IR_RAW)
-		ir_raw_event_unregister(dev);
-out_input:
-	input_unregister_device(dev->input_dev);
-	dev->input_dev = NULL;
-out_table:
-	ir_free_table(&dev->rc_map);
+out_rx:
+	rc_free_rx_device(dev);
 out_dev:
 	device_del(&dev->dev);
 out_unlock:
@@ -1601,12 +1625,7 @@ void rc_unregister_device(struct rc_dev *dev)
 	if (dev->driver_type == RC_DRIVER_IR_RAW)
 		ir_raw_event_unregister(dev);
 
-	/* Freeing the table should also call the stop callback */
-	ir_free_table(&dev->rc_map);
-	IR_dprintk(1, "Freed keycode table\n");
-
-	input_unregister_device(dev->input_dev);
-	dev->input_dev = NULL;
+	rc_free_rx_device(dev);
 
 	device_del(&dev->dev);
 
-- 
2.10.2

  parent reply	other threads:[~2016-12-14 14:00 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-14 14:00 [PATCH v4 0/6] Add support for IR transmitters Andi Shyti
2016-12-14 14:00 ` Andi Shyti
2016-12-14 14:00 ` [PATCH v4 1/6] [media] rc-main: assign driver type during allocation Andi Shyti
2016-12-14 14:00 ` Andi Shyti [this message]
2016-12-15 15:50   ` [PATCH v4 2/6] [media] rc-main: split setup and unregister functions Sean Young
2016-12-15 16:01     ` Andi Shyti
2016-12-14 14:00 ` [PATCH v4 3/6] [media] rc-core: add support for IR raw transmitters Andi Shyti
2016-12-14 14:00 ` [PATCH v4 4/6] [media] rc-ir-raw: do not generate any receiving thread for " Andi Shyti
2016-12-14 14:00 ` [PATCH v4 5/6] Documentation: bindings: add documentation for ir-spi device driver Andi Shyti
2016-12-14 14:00 ` [PATCH v4 6/6] [media] rc: add support for IR LEDs driven through SPI Andi Shyti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161214140030.28537-3-andi.shyti@samsung.com \
    --to=andi.shyti@samsung.com \
    --cc=andi@etezian.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=j.anaszewski@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@osg.samsung.com \
    --cc=robh+dt@kernel.org \
    --cc=rpurdie@rpsys.net \
    --cc=sean@mess.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.