From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Thu, 25 May 2017 18:09:46 -0400 Subject: [U-Boot] [PATCHv4 3/3] ARM64: poplar: hi3798cv200: u-boot support for Poplar 96Boards In-Reply-To: References: <20170511123547.GC5701@bill-the-cat> <20170517220623.GL4631@bill-the-cat> <7fd042e6-fb1f-a4ee-0a54-c39a0e25ef40@linaro.org> <20170525203100.GE10782@bill-the-cat> <21be0cad-5ac4-63c2-851a-fd28c4dc2a35@linaro.org> <20170525211205.GF10782@bill-the-cat> Message-ID: <20170525220946.GH10782@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, May 25, 2017 at 03:21:04PM -0600, Simon Glass wrote: > Hi Tom, > > On 25 May 2017 at 15:12, Tom Rini wrote: > > On Thu, May 25, 2017 at 10:58:20PM +0200, Jorge Ramirez wrote: > >> On 05/25/2017 10:55 PM, Jorge Ramirez wrote: > >> >On 05/25/2017 10:31 PM, Tom Rini wrote: > >> >>On Thu, May 25, 2017 at 08:38:47PM +0200, Jorge Ramirez wrote: > >> >>>On 05/18/2017 12:06 AM, Tom Rini wrote: > >> >>>>>>>having platform data. > >> >>>>>>No, I think we're going for overkill here by not doing > >> >>>>>>serial_pl01x.c as > >> >>>>>>platform data. ns16550 does platform data for this already. This > >> >>>>>>sounds like the lowest overhead way to get the clock > >> >>>>>>populated and not > >> >>>>>>have some DT data that's not going to be accepted upstream. > >> >>>>>> > >> >>>>>ummmm I am a bit lost at this point, could we recap please? > >> >>>>Lets update the recap: > >> >>>>- Please re-submit the dts file, now with whatever form is > >> >>>>in v4.12-rc1, > >> >>>> saying as such in the commit (if it's just the commit message that > >> >>>> changes, that's fine and great). > >> >>>The DTS file in v4.12-rc2 still does NOT contain the usb node. > >> >>> > >> >>>==> Should I then not use the DM on USB so I can avoid DTS changes? > >> >>Well, you can either put it in the -u-boot.dtsi file for the board, and > >> >>remove that later once it's upstream. > >> > >> > >> yes I'll do that. thanks. > >> > >> > > >> >> > >> >>>>- Please update serial_pl01x.c to be able to get the clock > >> >>>>via platform > >> >>>> data, update and test your board to confirm it works. > >> >>>um, It gets tricky; > >> >>>I can not use platform_data since I can not use SERIAL_DM because > >> >>>the device tree does have a UART node which gets picked up. > >> >>How about disabling the node in -u-boot.dtsi for the board and then you > >> >>can use platform data, > >> > > >> > >> I dont think that would because CONFIG_OF is enabled for USB; so the > >> kernel dtsi that contains the uart node (without the clock!) will be > >> picked by u-boot and the uart will not be initialized properly. > >> I still think that the simplest solution is to let me merge with the > >> kernel's device tree plus this u-boot.dtsi [1]; > >> then just get rid of the file when possible (and NEIHER the source > >> code NOR the configs) would need to change > >> > >> [1] https://github.com/ldts/poplar-u-boot/blob/upstream/arch/arm/dts/hi3798cv200-u-boot.dtsi > > > > Yes, sorry. [1] needs to be updated to disable uart0 so that you can > > use platform data, at least for now. I do want to talk more with Rob > > about the general problem this exposes. > > Using platform data because we cannot put a clock frequency in the DT > node seems unfortunate to me. With a little flexibility, DT can be > made to work. But IMO the sort of pedantry makes great the enemy of > good. This, and the alias issue we talked about the other day (wrt mmc) do highlight what I see as problems of the dts being too kernel-centric. But I also really want to wait for Rob to chime in before we get too far here. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: