Hi! > >No, tag_ksz part probably is not acceptable. Do you see solution > >better than just copying it into tag_ksz1 file? > > You could have all Micrel tag implementations live under net/dsa/tag_ksz.c and have e.g: DSA_TAG_PROTO_KSZ for the current (newer) switches and DSA_TAG_PROTO_KSZ_LEGACY (or any other name) for the older switches and you would provide two sets of function pointers depending on which protocol is requested by the switch. > > Considering the minor difference needed in tagging here, it might be acceptable to actually keep the current functions and just have the xmit() call check what get_tag_protocol returns and use word 1 or 0 based on that. Even though that's a fast path it shouldn't hurt performance too much. If it does, we can always copy the tagging protocol into dsa_slave_priv so you have a fast access to it. > Actually I believe I can do optimizer tricks to keep this zero-cost with clean code, if needed. > > > >Any more comments, etc? > > The MII emulation bits are interesting, was it not sufficient if you implemented phy_read and phy_write operations that perform the necessary internal PHY accesses or maybe you don't get access to standard MII registers? b53 does such a thing and we merely just need to do a simple shift to access the MII register number, thus avoiding the translation. > We don't get standard MII registers over SPI bus. > >Help would be welcome. > > I concur with Andrew, try to get a patch series, even an RFC one together so we can review things individually. > > How functional is your driver so far? I'd say the basic stuff to get working: counters (debugging), link management (auto-negotiation, forced, etc.) and basic bridging: all ports separate by default and working port to port switching when brought together in a bridge. VLAN, FDB, MDB, other ethtool goodies can be added later on. > Which counters are essential? Link management and basic bridging should work, not sure if I'll have time to do more than that. Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html