All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, famz@redhat.com, qemu-block@nongnu.org,
	Ronnie Sahlberg <ronniesahlberg@gmail.com>,
	Paolo Bonzini <pbonzini@redhat.com>, Peter Lieven <pl@kamp.de>,
	Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v8 06/21] iscsi: Switch cluster_sectors to byte-based
Date: Tue, 13 Feb 2018 14:26:46 -0600	[thread overview]
Message-ID: <20180213202701.15858-7-eblake@redhat.com> (raw)
In-Reply-To: <20180213202701.15858-1-eblake@redhat.com>

We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based.  Convert all uses of
the cluster size in sectors, along with adding assertions that we
are not dividing by zero.

Improve some comment grammar while in the area.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>

---
v8: rebase to master
v2-v7: no change
---
 block/iscsi.c | 56 +++++++++++++++++++++++++++++++++++---------------------
 1 file changed, 35 insertions(+), 21 deletions(-)

diff --git a/block/iscsi.c b/block/iscsi.c
index 421983dd6ff..3414c21c7f5 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -86,7 +86,7 @@ typedef struct IscsiLun {
     unsigned long *allocmap;
     unsigned long *allocmap_valid;
     long allocmap_size;
-    int cluster_sectors;
+    int cluster_size;
     bool use_16_for_rw;
     bool write_protected;
     bool lbpme;
@@ -430,9 +430,10 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
 {
     iscsi_allocmap_free(iscsilun);

+    assert(iscsilun->cluster_size);
     iscsilun->allocmap_size =
-        DIV_ROUND_UP(sector_lun2qemu(iscsilun->num_blocks, iscsilun),
-                     iscsilun->cluster_sectors);
+        DIV_ROUND_UP(iscsilun->num_blocks * iscsilun->block_size,
+                     iscsilun->cluster_size);

     iscsilun->allocmap = bitmap_try_new(iscsilun->allocmap_size);
     if (!iscsilun->allocmap) {
@@ -440,7 +441,7 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
     }

     if (open_flags & BDRV_O_NOCACHE) {
-        /* in case that cache.direct = on all allocmap entries are
+        /* when cache.direct = on all allocmap entries are
          * treated as invalid to force a relookup of the block
          * status on every read request */
         return 0;
@@ -461,17 +462,19 @@ iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
                       int nb_sectors, bool allocated, bool valid)
 {
     int64_t cl_num_expanded, nb_cls_expanded, cl_num_shrunk, nb_cls_shrunk;
+    int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;

     if (iscsilun->allocmap == NULL) {
         return;
     }
     /* expand to entirely contain all affected clusters */
-    cl_num_expanded = sector_num / iscsilun->cluster_sectors;
+    assert(cluster_sectors);
+    cl_num_expanded = sector_num / cluster_sectors;
     nb_cls_expanded = DIV_ROUND_UP(sector_num + nb_sectors,
-                                   iscsilun->cluster_sectors) - cl_num_expanded;
+                                   cluster_sectors) - cl_num_expanded;
     /* shrink to touch only completely contained clusters */
-    cl_num_shrunk = DIV_ROUND_UP(sector_num, iscsilun->cluster_sectors);
-    nb_cls_shrunk = (sector_num + nb_sectors) / iscsilun->cluster_sectors
+    cl_num_shrunk = DIV_ROUND_UP(sector_num, cluster_sectors);
+    nb_cls_shrunk = (sector_num + nb_sectors) / cluster_sectors
                       - cl_num_shrunk;
     if (allocated) {
         bitmap_set(iscsilun->allocmap, cl_num_expanded, nb_cls_expanded);
@@ -535,9 +538,12 @@ iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t sector_num,
     if (iscsilun->allocmap == NULL) {
         return true;
     }
-    size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+    assert(iscsilun->cluster_size);
+    size = DIV_ROUND_UP(sector_num + nb_sectors,
+                        iscsilun->cluster_size >> BDRV_SECTOR_BITS);
     return !(find_next_bit(iscsilun->allocmap, size,
-                           sector_num / iscsilun->cluster_sectors) == size);
+                           sector_num * BDRV_SECTOR_SIZE /
+                           iscsilun->cluster_size) == size);
 }

 static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
@@ -547,9 +553,12 @@ static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
     if (iscsilun->allocmap_valid == NULL) {
         return false;
     }
-    size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+    assert(iscsilun->cluster_size);
+    size = DIV_ROUND_UP(sector_num + nb_sectors,
+                        iscsilun->cluster_size >> BDRV_SECTOR_BITS);
     return (find_next_zero_bit(iscsilun->allocmap_valid, size,
-                               sector_num / iscsilun->cluster_sectors) == size);
+                               sector_num * BDRV_SECTOR_SIZE /
+                               iscsilun->cluster_size) == size);
 }

 static int coroutine_fn
@@ -793,16 +802,21 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
         BlockDriverState *file;
         /* check the block status from the beginning of the cluster
          * containing the start sector */
-        int64_t ret = iscsi_co_get_block_status(bs,
-                          sector_num - sector_num % iscsilun->cluster_sectors,
-                          BDRV_REQUEST_MAX_SECTORS, &pnum, &file);
+        int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
+        int head;
+        int64_t ret;
+
+        assert(cluster_sectors);
+        head = sector_num % cluster_sectors;
+        ret = iscsi_co_get_block_status(bs, sector_num - head,
+                                        BDRV_REQUEST_MAX_SECTORS, &pnum,
+                                        &file);
         if (ret < 0) {
             return ret;
         }
         /* if the whole request falls into an unallocated area we can avoid
-         * to read and directly return zeroes instead */
-        if (ret & BDRV_BLOCK_ZERO &&
-            pnum >= nb_sectors + sector_num % iscsilun->cluster_sectors) {
+         * reading and directly return zeroes instead */
+        if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
             qemu_iovec_memset(iov, 0, 0x00, iov->size);
             return 0;
         }
@@ -1953,8 +1967,8 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
      * reasonable size */
     if (iscsilun->bl.opt_unmap_gran * iscsilun->block_size >= 4 * 1024 &&
         iscsilun->bl.opt_unmap_gran * iscsilun->block_size <= 16 * 1024 * 1024) {
-        iscsilun->cluster_sectors = (iscsilun->bl.opt_unmap_gran *
-                                     iscsilun->block_size) >> BDRV_SECTOR_BITS;
+        iscsilun->cluster_size = iscsilun->bl.opt_unmap_gran *
+            iscsilun->block_size;
         if (iscsilun->lbprz) {
             ret = iscsi_allocmap_init(iscsilun, bs->open_flags);
         }
@@ -2163,7 +2177,7 @@ static int iscsi_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
 {
     IscsiLun *iscsilun = bs->opaque;
     bdi->unallocated_blocks_are_zero = iscsilun->lbprz;
-    bdi->cluster_size = iscsilun->cluster_sectors * BDRV_SECTOR_SIZE;
+    bdi->cluster_size = iscsilun->cluster_size;
     return 0;
 }

-- 
2.14.3

  parent reply	other threads:[~2018-02-13 20:27 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-13 20:26 [Qemu-devel] [PATCH v8 00/21] add byte-based block_status driver callbacks Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 01/21] block: Add .bdrv_co_block_status() callback Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 02/21] nvme: Drop pointless .bdrv_co_get_block_status() Eric Blake
2018-02-14 17:41   ` Philippe Mathieu-Daudé
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 03/21] block: Switch passthrough drivers to .bdrv_co_block_status() Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 04/21] file-posix: Switch " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 05/21] gluster: " Eric Blake
2018-02-13 20:26 ` Eric Blake [this message]
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 07/21] iscsi: Switch iscsi_allocmap_update() to byte-based Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 08/21] iscsi: Switch to .bdrv_co_block_status() Eric Blake
2018-02-14 11:53   ` Kevin Wolf
2018-02-14 14:33     ` Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 09/21] null: " Eric Blake
2018-02-14 12:05   ` Kevin Wolf
2018-02-14 14:44     ` Eric Blake
2018-02-14 14:55       ` Kevin Wolf
2018-02-23 16:43     ` Eric Blake
2018-02-23 17:05       ` Kevin Wolf
2018-02-23 23:38         ` Eric Blake
2018-02-26 14:05           ` Kevin Wolf
2018-03-01  7:25             ` Vladimir Sementsov-Ogievskiy
2018-03-01  9:48               ` Kevin Wolf
2018-03-01  9:57                 ` Vladimir Sementsov-Ogievskiy
2018-03-01 10:13                   ` Kevin Wolf
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 10/21] parallels: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 11/21] qcow: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 12/21] qcow2: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 13/21] qed: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 14/21] raw: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 15/21] sheepdog: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 16/21] vdi: Avoid bitrot of debugging code Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 17/21] vdi: Switch to .bdrv_co_block_status() Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 18/21] vmdk: " Eric Blake
2018-02-13 20:26 ` [Qemu-devel] [PATCH v8 19/21] vpc: " Eric Blake
2018-02-14 13:08   ` Kevin Wolf
2018-02-14 14:51     ` Eric Blake
2018-02-13 20:27 ` [Qemu-devel] [PATCH v8 20/21] vvfat: " Eric Blake
2018-02-14 13:12   ` Kevin Wolf
2018-02-14 14:50     ` Eric Blake
2018-02-14 15:00       ` Kevin Wolf
2018-02-13 20:27 ` [Qemu-devel] [PATCH v8 21/21] block: Drop unused .bdrv_co_get_block_status() Eric Blake
2018-02-14 17:11 ` [Qemu-devel] [PATCH v8 00/21] add byte-based block_status driver callbacks Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180213202701.15858-7-eblake@redhat.com \
    --to=eblake@redhat.com \
    --cc=famz@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=pl@kamp.de \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=ronniesahlberg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.