From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 32/45] cros: Update ec_commands to latest version
Date: Mon, 1 Oct 2018 12:22:36 -0600 [thread overview]
Message-ID: <20181001182249.129565-33-sjg@chromium.org> (raw)
In-Reply-To: <20181001182249.129565-1-sjg@chromium.org>
This file has changed quite a bit in the last 5 years as the capabilities
of the ECs have grown. Sync it up with the copy in coreboot commit
b9141f2215.
The only change is the addition of EC_VBNV_BLOCK_SIZE_V2. This is needed
because U-Boot uses the new v2 vboot API and this is not currently fully
supported by Chromium OS firmware.
Signed-off-by: Simon Glass <sjg@chromium.org>
---
cmd/cros_ec.c | 5 +-
drivers/misc/cros_ec.c | 7 +-
drivers/misc/cros_ec_sandbox.c | 4 +-
include/ec_commands.h | 4324 ++++++++++++++++++++++++++------
4 files changed, 3613 insertions(+), 727 deletions(-)
diff --git a/cmd/cros_ec.c b/cmd/cros_ec.c
index fb369a4e329..3ac4f3b235d 100644
--- a/cmd/cros_ec.c
+++ b/cmd/cros_ec.c
@@ -27,7 +27,7 @@ static int cros_ec_decode_region(int argc, char * const argv[])
{
if (argc > 0) {
if (0 == strcmp(*argv, "rw"))
- return EC_FLASH_REGION_RW;
+ return EC_FLASH_REGION_ACTIVE;
else if (0 == strcmp(*argv, "ro"))
return EC_FLASH_REGION_RO;
@@ -137,7 +137,6 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
printf("rows = %u\n", info.rows);
printf("cols = %u\n", info.cols);
- printf("switches = %#x\n", info.switches);
} else if (0 == strcmp("curimage", cmd)) {
enum ec_current_image image;
@@ -177,7 +176,7 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
region = cros_ec_decode_region(argc - 2, argv + 2);
if (region == EC_FLASH_REGION_RO)
cmd = EC_REBOOT_JUMP_RO;
- else if (region == EC_FLASH_REGION_RW)
+ else if (region == EC_FLASH_REGION_ACTIVE)
cmd = EC_REBOOT_JUMP_RW;
else
return CMD_RET_USAGE;
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index 5ccf8ad359b..2deed0e839f 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -473,7 +473,7 @@ int cros_ec_read_hash(struct udevice *dev, struct ec_response_vboot_hash *hash)
p.cmd = EC_VBOOT_HASH_START;
p.hash_type = EC_VBOOT_HASH_TYPE_SHA256;
p.nonce_size = 0;
- p.offset = EC_VBOOT_HASH_OFFSET_RW;
+ p.offset = EC_VBOOT_HASH_OFFSET_ACTIVE;
if (ec_command(dev, EC_CMD_VBOOT_HASH, 0, &p, sizeof(p),
hash, sizeof(*hash)) < 0)
@@ -894,7 +894,8 @@ int cros_ec_flash_update_rw(struct udevice *dev, const uint8_t *image,
uint32_t rw_offset, rw_size;
int ret;
- if (cros_ec_flash_offset(dev, EC_FLASH_REGION_RW, &rw_offset, &rw_size))
+ if (cros_ec_flash_offset(dev, EC_FLASH_REGION_ACTIVE, &rw_offset,
+ &rw_size))
return -1;
if (image_size > (int)rw_size)
return -1;
@@ -1045,7 +1046,7 @@ int cros_ec_decode_ec_flash(struct udevice *dev, struct fdt_cros_ec *config)
if (0 == strcmp(name, "ro")) {
region = EC_FLASH_REGION_RO;
} else if (0 == strcmp(name, "rw")) {
- region = EC_FLASH_REGION_RW;
+ region = EC_FLASH_REGION_ACTIVE;
} else if (0 == strcmp(name, "wp-ro")) {
region = EC_FLASH_REGION_WP_RO;
} else {
diff --git a/drivers/misc/cros_ec_sandbox.c b/drivers/misc/cros_ec_sandbox.c
index dedad9b8573..d741554d8a6 100644
--- a/drivers/misc/cros_ec_sandbox.c
+++ b/drivers/misc/cros_ec_sandbox.c
@@ -365,7 +365,7 @@ static int process_cmd(struct ec_state *ec,
struct fmap_entry *entry;
int ret, size;
- entry = &ec->ec_config.region[EC_FLASH_REGION_RW];
+ entry = &ec->ec_config.region[EC_FLASH_REGION_ACTIVE];
switch (req->cmd) {
case EC_VBOOT_HASH_RECALC:
@@ -420,7 +420,7 @@ static int process_cmd(struct ec_state *ec,
switch (req->region) {
case EC_FLASH_REGION_RO:
- case EC_FLASH_REGION_RW:
+ case EC_FLASH_REGION_ACTIVE:
case EC_FLASH_REGION_WP_RO:
entry = &ec->ec_config.region[req->region];
resp->offset = entry->offset;
diff --git a/include/ec_commands.h b/include/ec_commands.h
index 76050664372..392c1f1a43a 100644
--- a/include/ec_commands.h
+++ b/include/ec_commands.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
+/* Copyright (c) 2018 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
@@ -27,7 +27,13 @@
* On I2C, all bytes are sent serially in the same message.
*/
-/* Current version of this protocol */
+/*
+ * Current version of this protocol
+ *
+ * TODO(crosbug.com/p/11223): This is effectively useless; protocol is
+ * determined in other ways. Remove this once the kernel code no longer
+ * depends on it.
+ */
#define EC_PROTO_VERSION 0x00000002
/* Command version mask */
@@ -70,18 +76,22 @@
#define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */
/* The offset address of each type of data in mapped memory. */
-#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors */
-#define EC_MEMMAP_FAN 0x10 /* Fan speeds */
-#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* Temp sensors (second set) */
-#define EC_MEMMAP_ID 0x20 /* 'E' 'C' */
+#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */
+#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */
+#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */
+#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */
#define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */
#define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */
#define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */
#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */
#define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */
-#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host command interface flags */
-#define EC_MEMMAP_SWITCHES 0x30
-#define EC_MEMMAP_HOST_EVENTS 0x34
+#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */
+/* Unused 0x28 - 0x2f */
+#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */
+/* Unused 0x31 - 0x33 */
+#define EC_MEMMAP_HOST_EVENTS 0x34 /* 32 bits */
+/* Reserve 0x38 - 0x3f for additional host event-related stuff */
+/* Battery values are all 32 bits */
#define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */
#define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */
#define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */
@@ -90,10 +100,33 @@
#define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */
#define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */
#define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */
+/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */
#define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */
#define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */
#define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */
#define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */
+#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */
+/* Unused 0x84 - 0x8f */
+#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/
+/* Unused 0x91 */
+#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometers data 0x92 - 0x9f */
+/* 0x92: Lid Angle if available, LID_ANGLE_UNRELIABLE otherwise */
+/* 0x94 - 0x99: 1st Accelerometer */
+/* 0x9a - 0x9f: 2nd Accelerometer */
+#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */
+/* Unused 0xa6 - 0xdf */
+
+/*
+ * ACPI is unable to access memory mapped data at or above this offset due to
+ * limitations of the ACPI protocol. Do not place data in the range 0xe0 - 0xfe
+ * which might be needed by ACPI.
+ */
+#define EC_MEMMAP_NO_ACPI 0xe0
+
+/* Define the format of the accelerometer mapped memory status byte. */
+#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f
+#define EC_MEMMAP_ACC_STATUS_BUSY_BIT (1 << 4)
+#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT (1 << 7)
/* Number of temp sensors@EC_MEMMAP_TEMP_SENSOR */
#define EC_TEMP_SENSOR_ENTRIES 16
@@ -103,6 +136,8 @@
* Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2.
*/
#define EC_TEMP_SENSOR_B_ENTRIES 8
+
+/* Special values for mapped temperature sensors */
#define EC_TEMP_SENSOR_NOT_PRESENT 0xff
#define EC_TEMP_SENSOR_ERROR 0xfe
#define EC_TEMP_SENSOR_NOT_POWERED 0xfd
@@ -113,6 +148,18 @@
*/
#define EC_TEMP_SENSOR_OFFSET 200
+/*
+ * Number of ALS readings at EC_MEMMAP_ALS
+ */
+#define EC_ALS_ENTRIES 2
+
+/*
+ * The default value a temperature sensor will return when it is present but
+ * has not been read this boot. This is a reasonable number to avoid
+ * triggering alarms on the host.
+ */
+#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET)
+
#define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */
#define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */
#define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */
@@ -142,9 +189,158 @@
#define EC_HOST_CMD_FLAG_VERSION_3 0x02
/* Wireless switch flags */
-#define EC_WIRELESS_SWITCH_WLAN 0x01
-#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02
-#define EC_WIRELESS_SWITCH_WWAN 0x04
+#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */
+#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */
+#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */
+#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */
+#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */
+
+/*****************************************************************************/
+/*
+ * ACPI commands
+ *
+ * These are valid ONLY on the ACPI command/data port.
+ */
+
+/*
+ * ACPI Read Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
+ * - Wait for EC_LPC_CMDR_PENDING bit to clear
+ * - Write address to EC_LPC_ADDR_ACPI_DATA
+ * - Wait for EC_LPC_CMDR_DATA bit to set
+ * - Read value from EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_READ 0x0080
+
+/*
+ * ACPI Write Embedded Controller
+ *
+ * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ *
+ * Use the following sequence:
+ *
+ * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
+ * - Wait for EC_LPC_CMDR_PENDING bit to clear
+ * - Write address to EC_LPC_ADDR_ACPI_DATA
+ * - Wait for EC_LPC_CMDR_PENDING bit to clear
+ * - Write value to EC_LPC_ADDR_ACPI_DATA
+ */
+#define EC_CMD_ACPI_WRITE 0x0081
+
+/*
+ * ACPI Burst Enable Embedded Controller
+ *
+ * This enables burst mode on the EC to allow the host to issue several
+ * commands back-to-back. While in this mode, writes to mapped multi-byte
+ * data are locked out to ensure data consistency.
+ */
+#define EC_CMD_ACPI_BURST_ENABLE 0x0082
+
+/*
+ * ACPI Burst Disable Embedded Controller
+ *
+ * This disables burst mode on the EC and stops preventing EC writes to mapped
+ * multi-byte data.
+ */
+#define EC_CMD_ACPI_BURST_DISABLE 0x0083
+
+/*
+ * ACPI Query Embedded Controller
+ *
+ * This clears the lowest-order bit in the currently pending host events, and
+ * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
+ * event 0x80000000 = 32), or 0 if no event was pending.
+ */
+#define EC_CMD_ACPI_QUERY_EVENT 0x0084
+
+/* Valid addresses in ACPI memory space, for read/write commands */
+
+/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
+#define EC_ACPI_MEM_VERSION 0x00
+/*
+ * Test location; writing value here updates test compliment byte to (0xff -
+ * value).
+ */
+#define EC_ACPI_MEM_TEST 0x01
+/* Test compliment; writes here are ignored. */
+#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02
+
+/* Keyboard backlight brightness percent (0 - 100) */
+#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
+/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */
+#define EC_ACPI_MEM_FAN_DUTY 0x04
+
+/*
+ * DPTF temp thresholds. Any of the EC's temp sensors can have up to two
+ * independent thresholds attached to them. The current value of the ID
+ * register determines which sensor is affected by the THRESHOLD and COMMIT
+ * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme
+ * as the memory-mapped sensors. The COMMIT register applies those settings.
+ *
+ * The spec does not mandate any way to read back the threshold settings
+ * themselves, but when a threshold is crossed the AP needs a way to determine
+ * which sensor(s) are responsible. Each reading of the ID register clears and
+ * returns one sensor ID that has crossed one of its threshold (in either
+ * direction) since the last read. A value of 0xFF means "no new thresholds
+ * have tripped". Setting or enabling the thresholds for a sensor will clear
+ * the unread event count for that sensor.
+ */
+#define EC_ACPI_MEM_TEMP_ID 0x05
+#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06
+#define EC_ACPI_MEM_TEMP_COMMIT 0x07
+/*
+ * Here are the bits for the COMMIT register:
+ * bit 0 selects the threshold index for the chosen sensor (0/1)
+ * bit 1 enables/disables the selected threshold (0 = off, 1 = on)
+ * Each write to the commit register affects one threshold.
+ */
+#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0)
+#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1)
+/*
+ * Example:
+ *
+ * Set the thresholds for sensor 2 to 50 C and 60 C:
+ * write 2 to [0x05] -- select temp sensor 2
+ * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET
+ * write 0x2 to [0x07] -- enable threshold 0 with this value
+ * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET
+ * write 0x3 to [0x07] -- enable threshold 1 with this value
+ *
+ * Disable the 60 C threshold, leaving the 50 C threshold unchanged:
+ * write 2 to [0x05] -- select temp sensor 2
+ * write 0x1 to [0x07] -- disable threshold 1
+ */
+
+/* DPTF battery charging current limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT 0x08
+
+/* Charging limit is specified in 64 mA steps */
+#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64
+/* Value to disable DPTF battery charging limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff
+
+/*
+ * Report device orientation
+ * bit 0 device is tablet mode
+ */
+#define EC_ACPI_MEM_DEVICE_ORIENTATION 0x09
+#define EC_ACPI_MEM_DEVICE_TABLET_MODE 0x01
+
+/*
+ * ACPI addresses 0x20 - 0xff map to EC_MEMMAP offset 0x00 - 0xdf. This data
+ * is read-only from the AP. Added in EC_ACPI_MEM_VERSION 2.
+ */
+#define EC_ACPI_MEM_MAPPED_BEGIN 0x20
+#define EC_ACPI_MEM_MAPPED_SIZE 0xe0
+
+/* Current version of ACPI memory address space */
+#define EC_ACPI_MEM_VERSION_CURRENT 2
+
/*
* This header file is used in coreboot both in C and ACPI code. The ACPI code
@@ -161,6 +357,92 @@
#define __packed __attribute__((packed))
#endif
+#ifndef __aligned
+#define __aligned(x) __attribute__((aligned(x)))
+#endif
+
+/*
+ * Attributes for EC request and response packets. Just defining __packed
+ * results in inefficient assembly code on ARM, if the structure is actually
+ * 32-bit aligned, as it should be for all buffers.
+ *
+ * Be very careful when adding these to existing structures. They will round
+ * up the structure size to the specified boundary.
+ *
+ * Also be very careful to make that if a structure is included in some other
+ * parent structure that the alignment will still be true given the packing of
+ * the parent structure. This is particularly important if the sub-structure
+ * will be passed as a pointer to another function, since that function will
+ * not know about the misaligment caused by the parent structure's packing.
+ *
+ * Also be very careful using __packed - particularly when nesting non-packed
+ * structures inside packed ones. In fact, DO NOT use __packed directly;
+ * always use one of these attributes.
+ *
+ * Once everything is annotated properly, the following search strings should
+ * not return ANY matches in this file other than right here:
+ *
+ * "__packed" - generates inefficient code; all sub-structs must also be packed
+ *
+ * "struct [^_]" - all structs should be annotated, except for structs that are
+ * members of other structs/unions (and their original declarations should be
+ * annotated).
+ */
+#ifdef CONFIG_HOSTCMD_ALIGNED
+
+/*
+ * Packed structures where offset and size are always aligned to 1, 2, or 4
+ * byte boundary.
+ */
+#define __ec_align1 __packed
+#define __ec_align2 __packed __aligned(2)
+#define __ec_align4 __packed __aligned(4)
+
+/*
+ * Packed structure which must be under-aligned, because its size is not a
+ * 4-byte multiple. This is sub-optimal because it forces byte-wise access
+ * of all multi-byte fields in it, even though they are themselves aligned.
+ *
+ * In theory, we could duplicate the structure with __aligned(4) for accessing
+ * its members, but use the __packed version for sizeof().
+ */
+#define __ec_align_size1 __packed
+
+/*
+ * Packed structure which must be under-aligned, because its offset inside a
+ * parent structure is not a 4-byte multiple.
+ */
+#define __ec_align_offset1 __packed
+#define __ec_align_offset2 __packed __aligned(2)
+
+/*
+ * Structures which are complicated enough that I'm skipping them on the first
+ * pass. They are effectively unchanged from their previous definitions.
+ *
+ * TODO(rspangler): Figure out what to do with these. It's likely necessary
+ * to work out the size and offset of each member and add explicit padding to
+ * maintain those.
+ */
+#define __ec_todo_packed __packed
+#define __ec_todo_unpacked
+
+#else /* !CONFIG_HOSTCMD_ALIGNED */
+
+/*
+ * Packed structures make no assumption about alignment, so they do inefficient
+ * byte-wise reads.
+ */
+#define __ec_align1 __packed
+#define __ec_align2 __packed
+#define __ec_align4 __packed
+#define __ec_align_size1 __packed
+#define __ec_align_offset1 __packed
+#define __ec_align_offset2 __packed
+#define __ec_todo_packed __packed
+#define __ec_todo_unpacked
+
+#endif /* !CONFIG_HOSTCMD_ALIGNED */
+
/* LPC command status byte masks */
/* EC has written a byte in the data register and host hasn't read it yet */
#define EC_LPC_STATUS_TO_HOST 0x01
@@ -170,7 +452,7 @@
#define EC_LPC_STATUS_PROCESSING 0x04
/* Last write to EC was a command, not data */
#define EC_LPC_STATUS_LAST_CMD 0x08
-/* EC is in burst mode. Unsupported by Chrome EC, so this bit is never set */
+/* EC is in burst mode */
#define EC_LPC_STATUS_BURST_MODE 0x10
/* SCI event is pending (requesting SCI query) */
#define EC_LPC_STATUS_SCI_PENDING 0x20
@@ -186,7 +468,9 @@
#define EC_LPC_STATUS_BUSY_MASK \
(EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
-/* Host command response codes */
+/* Host command response codes (16-bit). Note that response codes should be
+ * stored in a uint16_t rather than directly in a value of this type.
+ */
enum ec_status {
EC_RES_SUCCESS = 0,
EC_RES_INVALID_COMMAND = 1,
@@ -202,7 +486,9 @@ enum ec_status {
EC_RES_OVERFLOW = 11, /* Table / data overflow */
EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */
EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */
- EC_RES_RESPONSE_TOO_BIG = 14 /* Response was too big to handle */
+ EC_RES_RESPONSE_TOO_BIG = 14, /* Response was too big to handle */
+ EC_RES_BUS_ERROR = 15, /* Communications bus error */
+ EC_RES_BUSY = 16 /* Up but too busy. Should retry */
};
/*
@@ -222,7 +508,8 @@ enum host_event_code {
EC_HOST_EVENT_BATTERY_CRITICAL = 7,
EC_HOST_EVENT_BATTERY = 8,
EC_HOST_EVENT_THERMAL_THRESHOLD = 9,
- EC_HOST_EVENT_THERMAL_OVERLOAD = 10,
+ /* Event generated by a device attached to the EC */
+ EC_HOST_EVENT_DEVICE = 10,
EC_HOST_EVENT_THERMAL = 11,
EC_HOST_EVENT_USB_CHARGER = 12,
EC_HOST_EVENT_KEY_PRESSED = 13,
@@ -240,6 +527,49 @@ enum host_event_code {
/* Shutdown due to battery level too low */
EC_HOST_EVENT_BATTERY_SHUTDOWN = 17,
+ /* Suggest that the AP throttle itself */
+ EC_HOST_EVENT_THROTTLE_START = 18,
+ /* Suggest that the AP resume normal speed */
+ EC_HOST_EVENT_THROTTLE_STOP = 19,
+
+ /* Hang detect logic detected a hang and host event timeout expired */
+ EC_HOST_EVENT_HANG_DETECT = 20,
+ /* Hang detect logic detected a hang and warm rebooted the AP */
+ EC_HOST_EVENT_HANG_REBOOT = 21,
+
+ /* PD MCU triggering host event */
+ EC_HOST_EVENT_PD_MCU = 22,
+
+ /* Battery Status flags have changed */
+ EC_HOST_EVENT_BATTERY_STATUS = 23,
+
+ /* EC encountered a panic, triggering a reset */
+ EC_HOST_EVENT_PANIC = 24,
+
+ /* Keyboard fastboot combo has been pressed */
+ EC_HOST_EVENT_KEYBOARD_FASTBOOT = 25,
+
+ /* EC RTC event occurred */
+ EC_HOST_EVENT_RTC = 26,
+
+ /* Emulate MKBP event */
+ EC_HOST_EVENT_MKBP = 27,
+
+ /* EC desires to change state of host-controlled USB mux */
+ EC_HOST_EVENT_USB_MUX = 28,
+
+ /* TABLET/LAPTOP mode event*/
+ EC_HOST_EVENT_MODE_CHANGE = 29,
+
+ /* Keyboard recovery combo with hardware reinitialization */
+ EC_HOST_EVENT_KEYBOARD_RECOVERY_HW_REINIT = 30,
+
+ /*
+ * Reserve this last bit to indicate that at least one bit in a
+ * secondary host event word is set. See crbug.com/633646.
+ */
+ EC_HOST_EVENT_EXTENDED = 31,
+
/*
* The high bit of the event mask is not used as a host event code. If
* it reads back as set, then the entire event mask should be
@@ -250,10 +580,10 @@ enum host_event_code {
EC_HOST_EVENT_INVALID = 32
};
/* Host event mask */
-#define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1))
+#define EC_HOST_EVENT_MASK(event_code) (1ULL << ((event_code) - 1))
/* Arguments at EC_LPC_ADDR_HOST_ARGS */
-struct ec_lpc_host_args {
+struct __ec_align4 ec_lpc_host_args {
uint8_t flags;
uint8_t command_version;
uint8_t data_size;
@@ -262,7 +592,7 @@ struct ec_lpc_host_args {
* all params/response data bytes.
*/
uint8_t checksum;
-} __packed;
+};
/* Flags for ec_lpc_host_args.flags */
/*
@@ -272,7 +602,7 @@ struct ec_lpc_host_args {
* If EC gets a command and this flag is not set, this is an old-style command.
* Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with
* unknown length. EC must respond with an old-style response (that is,
- * withouth setting EC_HOST_ARGS_FLAG_TO_HOST).
+ * without setting EC_HOST_ARGS_FLAG_TO_HOST).
*/
#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01
/*
@@ -284,6 +614,89 @@ struct ec_lpc_host_args {
*/
#define EC_HOST_ARGS_FLAG_TO_HOST 0x02
+/*****************************************************************************/
+/*
+ * Byte codes returned by EC over SPI interface.
+ *
+ * These can be used by the AP to debug the EC interface, and to determine
+ * when the EC is not in a state where it will ever get around to responding
+ * to the AP.
+ *
+ * Example of sequence of bytes read from EC for a current good transfer:
+ * 1. - - AP asserts chip select (CS#)
+ * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request
+ * 3. - - EC starts handling CS# interrupt
+ * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request
+ * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in
+ * bytes looking for EC_SPI_FRAME_START
+ * 6. - - EC finishes processing and sets up response
+ * 7. EC_SPI_FRAME_START - AP reads frame byte
+ * 8. (response packet) - AP reads response packet
+ * 9. EC_SPI_PAST_END - Any additional bytes read by AP
+ * 10 - - AP deasserts chip select
+ * 11 - - EC processes CS# interrupt and sets up DMA for
+ * next request
+ *
+ * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than
+ * the following byte values:
+ * EC_SPI_OLD_READY
+ * EC_SPI_RX_READY
+ * EC_SPI_RECEIVING
+ * EC_SPI_PROCESSING
+ *
+ * Then the EC found an error in the request, or was not ready for the request
+ * and lost data. The AP should give up waiting for EC_SPI_FRAME_START,
+ * because the EC is unable to tell when the AP is done sending its request.
+ */
+
+/*
+ * Framing byte which precedes a response packet from the EC. After sending a
+ * request, the AP will clock in bytes until it sees the framing byte, then
+ * clock in the response packet.
+ */
+#define EC_SPI_FRAME_START 0xec
+
+/*
+ * Padding bytes which are clocked out after the end of a response packet.
+ */
+#define EC_SPI_PAST_END 0xed
+
+/*
+ * EC is ready to receive, and has ignored the byte sent by the AP. EC expects
+ * that the AP will send a valid packet header (starting with
+ * EC_COMMAND_PROTOCOL_3) in the next 32 bytes.
+ */
+#define EC_SPI_RX_READY 0xf8
+
+/*
+ * EC has started receiving the request from the AP, but hasn't started
+ * processing it yet.
+ */
+#define EC_SPI_RECEIVING 0xf9
+
+/* EC has received the entire request from the AP and is processing it. */
+#define EC_SPI_PROCESSING 0xfa
+
+/*
+ * EC received bad data from the AP, such as a packet header with an invalid
+ * length. EC will ignore all data until chip select deasserts.
+ */
+#define EC_SPI_RX_BAD_DATA 0xfb
+
+/*
+ * EC received data from the AP before it was ready. That is, the AP asserted
+ * chip select and started clocking data before the EC was ready to receive it.
+ * EC will ignore all data until chip select deasserts.
+ */
+#define EC_SPI_NOT_READY 0xfc
+
+/*
+ * EC was ready to receive a request from the AP. EC has treated the byte sent
+ * by the AP as part of a request packet, or (for old-style ECs) is processing
+ * a fully received packet but is not ready to respond yet.
+ */
+#define EC_SPI_OLD_READY 0xfd
+
/*****************************************************************************/
/*
@@ -332,8 +745,8 @@ struct ec_lpc_host_args {
#define EC_HOST_REQUEST_VERSION 3
/* Version 3 request from host */
-struct ec_host_request {
- /* Struct version (=3)
+struct __ec_align4 ec_host_request {
+ /* Structure version (=3)
*
* EC will return EC_RES_INVALID_HEADER if it receives a header with a
* version it doesn't know how to parse.
@@ -357,13 +770,13 @@ struct ec_host_request {
/* Length of data which follows this header */
uint16_t data_len;
-} __packed;
+};
#define EC_HOST_RESPONSE_VERSION 3
/* Version 3 response from EC */
-struct ec_host_response {
- /* Struct version (=3) */
+struct __ec_align4 ec_host_response {
+ /* Structure version (=3) */
uint8_t struct_version;
/*
@@ -380,18 +793,21 @@ struct ec_host_response {
/* Unused bytes in current protocol version; set to 0 */
uint16_t reserved;
-} __packed;
+};
/*****************************************************************************/
/*
* Notes on commands:
*
- * Each command is an 8-byte command value. Commands which take params or
- * return response data specify structs for that data. If no struct is
+ * Each command is an 16-bit command value. Commands which take params or
+ * return response data specify structures for that data. If no structure is
* specified, the command does not input or output data, respectively.
* Parameter/response length is implicit in the structs. Some underlying
* communication protocols (I2C, SPI) may add length or checksum headers, but
* those are implementation-dependent and not defined here.
+ *
+ * All commands MUST be #defined to be 4-digit UPPER CASE hex values
+ * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
*/
/*****************************************************************************/
@@ -401,28 +817,28 @@ struct ec_host_response {
* Get protocol version, used to deal with non-backward compatible protocol
* changes.
*/
-#define EC_CMD_PROTO_VERSION 0x00
+#define EC_CMD_PROTO_VERSION 0x0000
-struct ec_response_proto_version {
+struct __ec_align4 ec_response_proto_version {
uint32_t version;
-} __packed;
+};
/*
* Hello. This is a simple command to test the EC is responsive to
* commands.
*/
-#define EC_CMD_HELLO 0x01
+#define EC_CMD_HELLO 0x0001
-struct ec_params_hello {
+struct __ec_align4 ec_params_hello {
uint32_t in_data; /* Pass anything here */
-} __packed;
+};
-struct ec_response_hello {
+struct __ec_align4 ec_response_hello {
uint32_t out_data; /* Output will be in_data + 0x01020304 */
-} __packed;
+};
/* Get version number */
-#define EC_CMD_GET_VERSION 0x02
+#define EC_CMD_GET_VERSION 0x0002
enum ec_current_image {
EC_IMAGE_UNKNOWN = 0,
@@ -430,49 +846,49 @@ enum ec_current_image {
EC_IMAGE_RW
};
-struct ec_response_get_version {
+struct __ec_align4 ec_response_get_version {
/* Null-terminated version strings for RO, RW */
char version_string_ro[32];
char version_string_rw[32];
char reserved[32]; /* Was previously RW-B string */
uint32_t current_image; /* One of ec_current_image */
-} __packed;
+};
/* Read test */
-#define EC_CMD_READ_TEST 0x03
+#define EC_CMD_READ_TEST 0x0003
-struct ec_params_read_test {
+struct __ec_align4 ec_params_read_test {
uint32_t offset; /* Starting value for read buffer */
uint32_t size; /* Size to read in bytes */
-} __packed;
+};
-struct ec_response_read_test {
+struct __ec_align4 ec_response_read_test {
uint32_t data[32];
-} __packed;
+};
/*
* Get build information
*
* Response is null-terminated string.
*/
-#define EC_CMD_GET_BUILD_INFO 0x04
+#define EC_CMD_GET_BUILD_INFO 0x0004
/* Get chip info */
-#define EC_CMD_GET_CHIP_INFO 0x05
+#define EC_CMD_GET_CHIP_INFO 0x0005
-struct ec_response_get_chip_info {
+struct __ec_align4 ec_response_get_chip_info {
/* Null-terminated strings */
char vendor[32];
char name[32];
char revision[32]; /* Mask version */
-} __packed;
+};
/* Get board HW version */
-#define EC_CMD_GET_BOARD_VERSION 0x06
+#define EC_CMD_GET_BOARD_VERSION 0x0006
-struct ec_response_board_version {
+struct __ec_align2 ec_response_board_version {
uint16_t board_version; /* A monotonously incrementing number. */
-} __packed;
+};
/*
* Read memory-mapped data.
@@ -482,72 +898,73 @@ struct ec_response_board_version {
*
* Response is params.size bytes of data.
*/
-#define EC_CMD_READ_MEMMAP 0x07
+#define EC_CMD_READ_MEMMAP 0x0007
-struct ec_params_read_memmap {
+struct __ec_align1 ec_params_read_memmap {
uint8_t offset; /* Offset in memmap (EC_MEMMAP_*) */
uint8_t size; /* Size to read in bytes */
-} __packed;
+};
/* Read versions supported for a command */
-#define EC_CMD_GET_CMD_VERSIONS 0x08
+#define EC_CMD_GET_CMD_VERSIONS 0x0008
-struct ec_params_get_cmd_versions {
+struct __ec_align1 ec_params_get_cmd_versions {
uint8_t cmd; /* Command to check */
-} __packed;
+};
+
+struct __ec_align2 ec_params_get_cmd_versions_v1 {
+ uint16_t cmd; /* Command to check */
+};
-struct ec_response_get_cmd_versions {
+struct __ec_align4 ec_response_get_cmd_versions {
/*
* Mask of supported versions; use EC_VER_MASK() to compare with a
* desired version.
*/
uint32_t version_mask;
-} __packed;
+};
/*
- * Check EC communcations status (busy). This is needed on i2c/spi but not
+ * Check EC communications status (busy). This is needed on i2c/spi but not
* on lpc since it has its own out-of-band busy indicator.
*
* lpc must read the status from the command register. Attempting this on
* lpc will overwrite the args/parameter space and corrupt its data.
*/
-#define EC_CMD_GET_COMMS_STATUS 0x09
+#define EC_CMD_GET_COMMS_STATUS 0x0009
/* Avoid using ec_status which is for return values */
enum ec_comms_status {
EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */
};
-struct ec_response_get_comms_status {
+struct __ec_align4 ec_response_get_comms_status {
uint32_t flags; /* Mask of enum ec_comms_status */
-} __packed;
+};
-/*
- * Fake a variety of responses, purely for testing purposes.
- * FIXME: Would be nice to force checksum errors.
- */
-#define EC_CMD_TEST_PROTOCOL 0x0a
+/* Fake a variety of responses, purely for testing purposes. */
+#define EC_CMD_TEST_PROTOCOL 0x000A
/* Tell the EC what to send back to us. */
-struct ec_params_test_protocol {
+struct __ec_align4 ec_params_test_protocol {
uint32_t ec_result;
uint32_t ret_len;
uint8_t buf[32];
-} __packed;
+};
/* Here it comes... */
-struct ec_response_test_protocol {
+struct __ec_align4 ec_response_test_protocol {
uint8_t buf[32];
-} __packed;
+};
-/* Get prococol information */
-#define EC_CMD_GET_PROTOCOL_INFO 0x0b
+/* Get protocol information */
+#define EC_CMD_GET_PROTOCOL_INFO 0x000B
/* Flags for ec_response_get_protocol_info.flags */
/* EC_RES_IN_PROGRESS may be returned if a command is slow */
#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0)
-struct ec_response_get_protocol_info {
+struct __ec_align4 ec_response_get_protocol_info {
/* Fields which exist if@least protocol version 3 supported */
/* Bitmask of protocol versions supported (1 << n means version n)*/
@@ -561,15 +978,153 @@ struct ec_response_get_protocol_info {
/* Flags; see EC_PROTOCOL_INFO_* */
uint32_t flags;
-} __packed;
+};
+
+
+/*****************************************************************************/
+/* Get/Set miscellaneous values */
+
+/* The upper byte of .flags tells what to do (nothing means "get") */
+#define EC_GSV_SET 0x80000000
+
+/* The lower three bytes of .flags identifies the parameter, if that has
+ meaning for an individual command. */
+#define EC_GSV_PARAM_MASK 0x00ffffff
+
+struct __ec_align4 ec_params_get_set_value {
+ uint32_t flags;
+ uint32_t value;
+};
+
+struct __ec_align4 ec_response_get_set_value {
+ uint32_t flags;
+ uint32_t value;
+};
+
+/* More than one command can use these structs to get/set parameters. */
+#define EC_CMD_GSV_PAUSE_IN_S5 0x000C
+
+/*****************************************************************************/
+/* List the features supported by the firmware */
+#define EC_CMD_GET_FEATURES 0x000D
+
+/* Supported features */
+enum ec_feature_code {
+ /*
+ * This image contains a limited set of features. Another image
+ * in RW partition may support more features.
+ */
+ EC_FEATURE_LIMITED = 0,
+ /*
+ * Commands for probing/reading/writing/erasing the flash in the
+ * EC are present.
+ */
+ EC_FEATURE_FLASH = 1,
+ /*
+ * Can control the fan speed directly.
+ */
+ EC_FEATURE_PWM_FAN = 2,
+ /*
+ * Can control the intensity of the keyboard backlight.
+ */
+ EC_FEATURE_PWM_KEYB = 3,
+ /*
+ * Support Google lightbar, introduced on Pixel.
+ */
+ EC_FEATURE_LIGHTBAR = 4,
+ /* Control of LEDs */
+ EC_FEATURE_LED = 5,
+ /* Exposes an interface to control gyro and sensors.
+ * The host goes through the EC to access these sensors.
+ * In addition, the EC may provide composite sensors, like lid angle.
+ */
+ EC_FEATURE_MOTION_SENSE = 6,
+ /* The keyboard is controlled by the EC */
+ EC_FEATURE_KEYB = 7,
+ /* The AP can use part of the EC flash as persistent storage. */
+ EC_FEATURE_PSTORE = 8,
+ /* The EC monitors BIOS port 80h, and can return POST codes. */
+ EC_FEATURE_PORT80 = 9,
+ /*
+ * Thermal management: include TMP specific commands.
+ * Higher level than direct fan control.
+ */
+ EC_FEATURE_THERMAL = 10,
+ /* Can switch the screen backlight on/off */
+ EC_FEATURE_BKLIGHT_SWITCH = 11,
+ /* Can switch the wifi module on/off */
+ EC_FEATURE_WIFI_SWITCH = 12,
+ /* Monitor host events, through for example SMI or SCI */
+ EC_FEATURE_HOST_EVENTS = 13,
+ /* The EC exposes GPIO commands to control/monitor connected devices. */
+ EC_FEATURE_GPIO = 14,
+ /* The EC can send i2c messages to downstream devices. */
+ EC_FEATURE_I2C = 15,
+ /* Command to control charger are included */
+ EC_FEATURE_CHARGER = 16,
+ /* Simple battery support. */
+ EC_FEATURE_BATTERY = 17,
+ /*
+ * Support Smart battery protocol
+ * (Common Smart Battery System Interface Specification)
+ */
+ EC_FEATURE_SMART_BATTERY = 18,
+ /* EC can detect when the host hangs. */
+ EC_FEATURE_HANG_DETECT = 19,
+ /* Report power information, for pit only */
+ EC_FEATURE_PMU = 20,
+ /* Another Cros EC device is present downstream of this one */
+ EC_FEATURE_SUB_MCU = 21,
+ /* Support USB Power delivery (PD) commands */
+ EC_FEATURE_USB_PD = 22,
+ /* Control USB multiplexer, for audio through USB port for instance. */
+ EC_FEATURE_USB_MUX = 23,
+ /* Motion Sensor code has an internal software FIFO */
+ EC_FEATURE_MOTION_SENSE_FIFO = 24,
+ /* Support temporary secure vstore */
+ EC_FEATURE_VSTORE = 25,
+ /* EC decides on USB-C SS mux state, muxes configured by host */
+ EC_FEATURE_USBC_SS_MUX_VIRTUAL = 26,
+ /* EC has RTC feature that can be controlled by host commands */
+ EC_FEATURE_RTC = 27,
+ /* The MCU exposes a Fingerprint sensor */
+ EC_FEATURE_FINGERPRINT = 28,
+ /* The MCU exposes a Touchpad */
+ EC_FEATURE_TOUCHPAD = 29,
+ /* The MCU has RWSIG task enabled */
+ EC_FEATURE_RWSIG = 30,
+ /* EC has device events support */
+ EC_FEATURE_DEVICE_EVENT = 31,
+ /* EC supports the unified wake masks for LPC/eSPI systems */
+ EC_FEATURE_UNIFIED_WAKE_MASKS = 32,
+};
+
+#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
+#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32))
+struct __ec_align4 ec_response_get_features {
+ uint32_t flags[2];
+};
+
+/*****************************************************************************/
+/* Get the board's SKU ID from EC */
+#define EC_CMD_GET_SKU_ID 0x000E
+
+/* Set SKU ID from AP */
+#define EC_CMD_SET_SKU_ID 0x000F
+
+struct __ec_align4 ec_sku_id_info {
+ uint32_t sku_id;
+};
/*****************************************************************************/
/* Flash commands */
/* Get flash info */
-#define EC_CMD_FLASH_INFO 0x10
+#define EC_CMD_FLASH_INFO 0x0010
+#define EC_VER_FLASH_INFO 2
-struct ec_response_flash_info {
+/* Version 0 returns these fields */
+struct __ec_align4 ec_response_flash_info {
/* Usable flash size, in bytes */
uint32_t flash_size;
/*
@@ -587,40 +1142,157 @@ struct ec_response_flash_info {
* multiple of this.
*/
uint32_t protect_block_size;
-} __packed;
+};
+
+/* Flags for version 1+ flash info command */
+/* EC flash erases bits to 0 instead of 1 */
+#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
+
+/* Flash must be selected for read/write/erase operations to succeed. This may
+ * be necessary on a chip where write/erase can be corrupted by other board
+ * activity, or where the chip needs to enable some sort of programming voltage,
+ * or where the read/write/erase operations require cleanly suspending other
+ * chip functionality. */
+#define EC_FLASH_INFO_SELECT_REQUIRED (1 << 1)
/*
- * Read flash
+ * Version 1 returns the same initial fields as version 0, with additional
+ * fields following.
*
- * Response is params.size bytes of data.
+ * gcc anonymous structs don't seem to get along with the __packed directive;
+ * if they did we'd define the version 0 structure as a sub-structure of this
+ * one.
+ *
+ * Version 2 supports flash banks of different sizes:
+ * The caller specified the number of banks it has preallocated
+ * (num_banks_desc)
+ * The EC returns the number of banks describing the flash memory.
+ * It adds banks descriptions up to num_banks_desc.
*/
-#define EC_CMD_FLASH_READ 0x11
+struct __ec_align4 ec_response_flash_info_1 {
+ /* Version 0 fields; see above for description */
+ uint32_t flash_size;
+ uint32_t write_block_size;
+ uint32_t erase_block_size;
+ uint32_t protect_block_size;
-struct ec_params_flash_read {
- uint32_t offset; /* Byte offset to read */
- uint32_t size; /* Size to read in bytes */
-} __packed;
+ /* Version 1 adds these fields: */
+ /*
+ * Ideal write size in bytes. Writes will be fastest if size is
+ * exactly this and offset is a multiple of this. For example, an EC
+ * may have a write buffer which can do half-page operations if data is
+ * aligned, and a slower word-at-a-time write mode.
+ */
+ uint32_t write_ideal_size;
-/* Write flash */
-#define EC_CMD_FLASH_WRITE 0x12
-#define EC_VER_FLASH_WRITE 1
+ /* Flags; see EC_FLASH_INFO_* */
+ uint32_t flags;
+};
-/* Version 0 of the flash command supported only 64 bytes of data */
+struct __ec_align4 ec_params_flash_info_2 {
+ /* Number of banks to describe */
+ uint16_t num_banks_desc;
+ /* Reserved; set 0; ignore on read */
+ uint8_t reserved[2];
+};
+
+struct ec_flash_bank {
+ /* Number of sector is in this bank. */
+ uint16_t count;
+ /* Size in power of 2 of each sector (8 --> 256 bytes) */
+ uint8_t size_exp;
+ /* Minimal write size for the sectors in this bank */
+ uint8_t write_size_exp;
+ /* Erase size for the sectors in this bank */
+ uint8_t erase_size_exp;
+ /* Size for write protection, usually identical to erase size. */
+ uint8_t protect_size_exp;
+ /* Reserved; set 0; ignore on read */
+ uint8_t reserved[2];
+};
+
+struct __ec_align4 ec_response_flash_info_2 {
+ /* Total flash in the EC. */
+ uint32_t flash_size;
+ /* Flags; see EC_FLASH_INFO_* */
+ uint32_t flags;
+ /* Maximum size to use to send data to write to the EC. */
+ uint32_t write_ideal_size;
+ /* Number of banks present in the EC. */
+ uint16_t num_banks_total;
+ /* Number of banks described in banks array. */
+ uint16_t num_banks_desc;
+ struct ec_flash_bank banks[0];
+};
+
+/*
+ * Read flash
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_FLASH_READ 0x0011
+
+struct __ec_align4 ec_params_flash_read {
+ uint32_t offset; /* Byte offset to read */
+ uint32_t size; /* Size to read in bytes */
+};
+
+/* Write flash */
+#define EC_CMD_FLASH_WRITE 0x0012
+#define EC_VER_FLASH_WRITE 1
+
+/* Version 0 of the flash command supported only 64 bytes of data */
#define EC_FLASH_WRITE_VER0_SIZE 64
-struct ec_params_flash_write {
+struct __ec_align4 ec_params_flash_write {
uint32_t offset; /* Byte offset to write */
uint32_t size; /* Size to write in bytes */
/* Followed by data to write */
-} __packed;
+};
/* Erase flash */
-#define EC_CMD_FLASH_ERASE 0x13
+#define EC_CMD_FLASH_ERASE 0x0013
-struct ec_params_flash_erase {
+/* v0 */
+struct __ec_align4 ec_params_flash_erase {
uint32_t offset; /* Byte offset to erase */
uint32_t size; /* Size to erase in bytes */
-} __packed;
+};
+
+
+#define EC_VER_FLASH_WRITE 1
+/* v1 add async erase:
+ * subcommands can returns:
+ * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below).
+ * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary.
+ * EC_RES_ERROR : other errors.
+ * EC_RES_BUSY : an existing erase operation is in progress.
+ * EC_RES_ACCESS_DENIED: Trying to erase running image.
+ *
+ * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just
+ * properly queued. The user must call ERASE_GET_RESULT subcommand to get
+ * the proper result.
+ * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send
+ * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC.
+ * ERASE_GET_RESULT command may timeout on EC where flash access is not
+ * permitted while erasing. (For instance, STM32F4).
+ */
+enum ec_flash_erase_cmd {
+ FLASH_ERASE_SECTOR, /* Erase and wait for result */
+ FLASH_ERASE_SECTOR_ASYNC, /* Erase and return immediately. */
+ FLASH_ERASE_GET_RESULT, /* Ask for last erase result */
+};
+
+struct __ec_align4 ec_params_flash_erase_v1 {
+ /* One of ec_flash_erase_cmd. */
+ uint8_t cmd;
+ /* Pad byte; currently always contains 0 */
+ uint8_t reserved;
+ /* No flags defined yet; set to 0 */
+ uint16_t flag;
+ /* Same as v0 parameters. */
+ struct ec_params_flash_erase params;
+};
/*
* Get/set flash protection.
@@ -632,7 +1304,7 @@ struct ec_params_flash_erase {
*
* If mask=0, simply returns the current flags state.
*/
-#define EC_CMD_FLASH_PROTECT 0x15
+#define EC_CMD_FLASH_PROTECT 0x0015
#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */
/* Flags for flash protection */
@@ -655,15 +1327,23 @@ struct ec_params_flash_erase {
* re-requesting the desired flags, or by a hard reset if that fails.
*/
#define EC_FLASH_PROTECT_ERROR_INCONSISTENT (1 << 5)
-/* Entile flash code protected when the EC boots */
+/* Entire flash code protected when the EC boots */
#define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6)
-
-struct ec_params_flash_protect {
+/* RW flash code protected when the EC boots */
+#define EC_FLASH_PROTECT_RW_AT_BOOT (1 << 7)
+/* RW flash code protected now. */
+#define EC_FLASH_PROTECT_RW_NOW (1 << 8)
+/* Rollback information flash region protected when the EC boots */
+#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT (1 << 9)
+/* Rollback information flash region protected now */
+#define EC_FLASH_PROTECT_ROLLBACK_NOW (1 << 10)
+
+struct __ec_align4 ec_params_flash_protect {
uint32_t mask; /* Bits in flags to apply */
uint32_t flags; /* New flags to apply */
-} __packed;
+};
-struct ec_response_flash_protect {
+struct __ec_align4 ec_response_flash_protect {
/* Current value of flash protect flags */
uint32_t flags;
/*
@@ -674,7 +1354,7 @@ struct ec_response_flash_protect {
uint32_t valid_flags;
/* Flags which can be changed given the current protection state */
uint32_t writable_flags;
-} __packed;
+};
/*
* Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
@@ -682,89 +1362,166 @@ struct ec_response_flash_protect {
*/
/* Get the region offset/size */
-#define EC_CMD_FLASH_REGION_INFO 0x16
+#define EC_CMD_FLASH_REGION_INFO 0x0016
#define EC_VER_FLASH_REGION_INFO 1
enum ec_flash_region {
/* Region which holds read-only EC image */
EC_FLASH_REGION_RO = 0,
- /* Region which holds rewritable EC image */
- EC_FLASH_REGION_RW,
+ /* Region which holds active rewritable EC image */
+ EC_FLASH_REGION_ACTIVE,
/*
* Region which should be write-protected in the factory (a superset of
* EC_FLASH_REGION_RO)
*/
EC_FLASH_REGION_WP_RO,
+ /* Region which holds updatable image */
+ EC_FLASH_REGION_UPDATE,
/* Number of regions */
EC_FLASH_REGION_COUNT,
};
-struct ec_params_flash_region_info {
+struct __ec_align4 ec_params_flash_region_info {
uint32_t region; /* enum ec_flash_region */
-} __packed;
+};
-struct ec_response_flash_region_info {
+struct __ec_align4 ec_response_flash_region_info {
uint32_t offset;
uint32_t size;
-} __packed;
+};
/* Read/write VbNvContext */
-#define EC_CMD_VBNV_CONTEXT 0x17
+#define EC_CMD_VBNV_CONTEXT 0x0017
#define EC_VER_VBNV_CONTEXT 1
#define EC_VBNV_BLOCK_SIZE 16
+#define EC_VBNV_BLOCK_SIZE_V2 64
enum ec_vbnvcontext_op {
EC_VBNV_CONTEXT_OP_READ,
EC_VBNV_CONTEXT_OP_WRITE,
};
-struct ec_params_vbnvcontext {
+struct __ec_align4 ec_params_vbnvcontext {
uint32_t op;
- uint8_t block[EC_VBNV_BLOCK_SIZE];
-} __packed;
+ uint8_t block[EC_VBNV_BLOCK_SIZE_V2];
+};
+
+struct __ec_align4 ec_response_vbnvcontext {
+ uint8_t block[EC_VBNV_BLOCK_SIZE_V2];
+};
+
+
+/* Get SPI flash information */
+#define EC_CMD_FLASH_SPI_INFO 0x0018
+
+struct __ec_align1 ec_response_flash_spi_info {
+ /* JEDEC info from command 0x9F (manufacturer, memory type, size) */
+ uint8_t jedec[3];
+
+ /* Pad byte; currently always contains 0 */
+ uint8_t reserved0;
+
+ /* Manufacturer / device ID from command 0x90 */
+ uint8_t mfr_dev_id[2];
+
+ /* Status registers from command 0x05 and 0x35 */
+ uint8_t sr1, sr2;
+};
+
-struct ec_response_vbnvcontext {
- uint8_t block[EC_VBNV_BLOCK_SIZE];
-} __packed;
+/* Select flash during flash operations */
+#define EC_CMD_FLASH_SELECT 0x0019
+
+struct __ec_align4 ec_params_flash_select {
+ /* 1 to select flash, 0 to deselect flash */
+ uint8_t select;
+};
/*****************************************************************************/
/* PWM commands */
/* Get fan target RPM */
-#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x20
+#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020
-struct ec_response_pwm_get_fan_rpm {
+struct __ec_align4 ec_response_pwm_get_fan_rpm {
uint32_t rpm;
-} __packed;
+};
/* Set target fan RPM */
-#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
+#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021
+
+/* Version 0 of input params */
+struct __ec_align4 ec_params_pwm_set_fan_target_rpm_v0 {
+ uint32_t rpm;
+};
-struct ec_params_pwm_set_fan_target_rpm {
+/* Version 1 of input params */
+struct __ec_align_size1 ec_params_pwm_set_fan_target_rpm_v1 {
uint32_t rpm;
-} __packed;
+ uint8_t fan_idx;
+};
/* Get keyboard backlight */
-#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
+/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */
+#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022
-struct ec_response_pwm_get_keyboard_backlight {
+struct __ec_align1 ec_response_pwm_get_keyboard_backlight {
uint8_t percent;
uint8_t enabled;
-} __packed;
+};
/* Set keyboard backlight */
-#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
+/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */
+#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023
-struct ec_params_pwm_set_keyboard_backlight {
+struct __ec_align1 ec_params_pwm_set_keyboard_backlight {
uint8_t percent;
-} __packed;
+};
/* Set target fan PWM duty cycle */
-#define EC_CMD_PWM_SET_FAN_DUTY 0x24
+#define EC_CMD_PWM_SET_FAN_DUTY 0x0024
+
+/* Version 0 of input params */
+struct __ec_align4 ec_params_pwm_set_fan_duty_v0 {
+ uint32_t percent;
+};
-struct ec_params_pwm_set_fan_duty {
+/* Version 1 of input params */
+struct __ec_align_size1 ec_params_pwm_set_fan_duty_v1 {
uint32_t percent;
-} __packed;
+ uint8_t fan_idx;
+};
+
+#define EC_CMD_PWM_SET_DUTY 0x0025
+/* 16 bit duty cycle, 0xffff = 100% */
+#define EC_PWM_MAX_DUTY 0xffff
+
+enum ec_pwm_type {
+ /* All types, indexed by board-specific enum pwm_channel */
+ EC_PWM_TYPE_GENERIC = 0,
+ /* Keyboard backlight */
+ EC_PWM_TYPE_KB_LIGHT,
+ /* Display backlight */
+ EC_PWM_TYPE_DISPLAY_LIGHT,
+ EC_PWM_TYPE_COUNT,
+};
+
+struct __ec_align4 ec_params_pwm_set_duty {
+ uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
+ uint8_t pwm_type; /* ec_pwm_type */
+ uint8_t index; /* Type-specific index, or 0 if unique */
+};
+
+#define EC_CMD_PWM_GET_DUTY 0x0026
+
+struct __ec_align1 ec_params_pwm_get_duty {
+ uint8_t pwm_type; /* ec_pwm_type */
+ uint8_t index; /* Type-specific index, or 0 if unique */
+};
+
+struct __ec_align2 ec_response_pwm_get_duty {
+ uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
+};
/*****************************************************************************/
/*
@@ -773,9 +1530,9 @@ struct ec_params_pwm_set_fan_duty {
* into a subcommand. We'll make separate structs for subcommands with
* different input args, so that we know how much to expect.
*/
-#define EC_CMD_LIGHTBAR_CMD 0x28
+#define EC_CMD_LIGHTBAR_CMD 0x0028
-struct rgb_s {
+struct __ec_todo_unpacked rgb_s {
uint8_t r, g, b;
};
@@ -783,17 +1540,17 @@ struct rgb_s {
/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a
* host command, but the alignment is the same regardless. Keep it that way.
*/
-struct lightbar_params {
+struct __ec_todo_packed lightbar_params_v0 {
/* Timing */
- int google_ramp_up;
- int google_ramp_down;
- int s3s0_ramp_up;
- int s0_tick_delay[2]; /* AC=0/1 */
- int s0a_tick_delay[2]; /* AC=0/1 */
- int s0s3_ramp_down;
- int s3_sleep_for;
- int s3_ramp_up;
- int s3_ramp_down;
+ int32_t google_ramp_up;
+ int32_t google_ramp_down;
+ int32_t s3s0_ramp_up;
+ int32_t s0_tick_delay[2]; /* AC=0/1 */
+ int32_t s0a_tick_delay[2]; /* AC=0/1 */
+ int32_t s0s3_ramp_down;
+ int32_t s3_sleep_for;
+ int32_t s3_ramp_up;
+ int32_t s3_ramp_down;
/* Oscillation */
uint8_t new_s0;
@@ -815,52 +1572,221 @@ struct lightbar_params {
/* Color palette */
struct rgb_s color[8]; /* 0-3 are Google colors */
-} __packed;
+};
+
+struct __ec_todo_packed lightbar_params_v1 {
+ /* Timing */
+ int32_t google_ramp_up;
+ int32_t google_ramp_down;
+ int32_t s3s0_ramp_up;
+ int32_t s0_tick_delay[2]; /* AC=0/1 */
+ int32_t s0a_tick_delay[2]; /* AC=0/1 */
+ int32_t s0s3_ramp_down;
+ int32_t s3_sleep_for;
+ int32_t s3_ramp_up;
+ int32_t s3_ramp_down;
+ int32_t s5_ramp_up;
+ int32_t s5_ramp_down;
+ int32_t tap_tick_delay;
+ int32_t tap_gate_delay;
+ int32_t tap_display_time;
+
+ /* Tap-for-battery params */
+ uint8_t tap_pct_red;
+ uint8_t tap_pct_green;
+ uint8_t tap_seg_min_on;
+ uint8_t tap_seg_max_on;
+ uint8_t tap_seg_osc;
+ uint8_t tap_idx[3];
+
+ /* Oscillation */
+ uint8_t osc_min[2]; /* AC=0/1 */
+ uint8_t osc_max[2]; /* AC=0/1 */
+ uint8_t w_ofs[2]; /* AC=0/1 */
+
+ /* Brightness limits based on the backlight and AC. */
+ uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_min[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_max[2]; /* AC=0/1 */
+
+ /* Battery level thresholds */
+ uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+
+ /* Map [AC][battery_level] to color index */
+ uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
+ uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
+
+ /* s5: single color pulse on inhibited power-up */
+ uint8_t s5_idx;
+
+ /* Color palette */
+ struct rgb_s color[8]; /* 0-3 are Google colors */
+};
+
+/* Lightbar command params v2
+ * crbug.com/467716
+ *
+ * lightbar_parms_v1 was too big for i2c, therefore in v2, we split them up by
+ * logical groups to make it more manageable ( < 120 bytes).
+ *
+ * NOTE: Each of these groups must be less than 120 bytes.
+ */
+
+struct __ec_todo_packed lightbar_params_v2_timing {
+ /* Timing */
+ int32_t google_ramp_up;
+ int32_t google_ramp_down;
+ int32_t s3s0_ramp_up;
+ int32_t s0_tick_delay[2]; /* AC=0/1 */
+ int32_t s0a_tick_delay[2]; /* AC=0/1 */
+ int32_t s0s3_ramp_down;
+ int32_t s3_sleep_for;
+ int32_t s3_ramp_up;
+ int32_t s3_ramp_down;
+ int32_t s5_ramp_up;
+ int32_t s5_ramp_down;
+ int32_t tap_tick_delay;
+ int32_t tap_gate_delay;
+ int32_t tap_display_time;
+};
+
+struct __ec_todo_packed lightbar_params_v2_tap {
+ /* Tap-for-battery params */
+ uint8_t tap_pct_red;
+ uint8_t tap_pct_green;
+ uint8_t tap_seg_min_on;
+ uint8_t tap_seg_max_on;
+ uint8_t tap_seg_osc;
+ uint8_t tap_idx[3];
+};
+
+struct __ec_todo_packed lightbar_params_v2_oscillation {
+ /* Oscillation */
+ uint8_t osc_min[2]; /* AC=0/1 */
+ uint8_t osc_max[2]; /* AC=0/1 */
+ uint8_t w_ofs[2]; /* AC=0/1 */
+};
+
+struct __ec_todo_packed lightbar_params_v2_brightness {
+ /* Brightness limits based on the backlight and AC. */
+ uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_min[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_max[2]; /* AC=0/1 */
+};
+
+struct __ec_todo_packed lightbar_params_v2_thresholds {
+ /* Battery level thresholds */
+ uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+};
+
+struct __ec_todo_packed lightbar_params_v2_colors {
+ /* Map [AC][battery_level] to color index */
+ uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
+ uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
+
+ /* s5: single color pulse on inhibited power-up */
+ uint8_t s5_idx;
+
+ /* Color palette */
+ struct rgb_s color[8]; /* 0-3 are Google colors */
+};
+
+/* Lightbyte program. */
+#define EC_LB_PROG_LEN 192
+struct __ec_todo_unpacked lightbar_program {
+ uint8_t size;
+ uint8_t data[EC_LB_PROG_LEN];
+};
-struct ec_params_lightbar {
+struct __ec_todo_packed ec_params_lightbar {
uint8_t cmd; /* Command (see enum lightbar_command) */
union {
- struct {
+ struct __ec_todo_unpacked {
/* no args */
- } dump, off, on, init, get_seq, get_params;
+ } dump, off, on, init, get_seq, get_params_v0, get_params_v1,
+ version, get_brightness, get_demo, suspend, resume,
+ get_params_v2_timing, get_params_v2_tap,
+ get_params_v2_osc, get_params_v2_bright,
+ get_params_v2_thlds, get_params_v2_colors;
- struct num {
+ struct __ec_todo_unpacked {
uint8_t num;
- } brightness, seq, demo;
+ } set_brightness, seq, demo;
- struct reg {
+ struct __ec_todo_unpacked {
uint8_t ctrl, reg, value;
} reg;
- struct rgb {
+ struct __ec_todo_unpacked {
uint8_t led, red, green, blue;
- } rgb;
+ } set_rgb;
+
+ struct __ec_todo_unpacked {
+ uint8_t led;
+ } get_rgb;
- struct lightbar_params set_params;
+ struct __ec_todo_unpacked {
+ uint8_t enable;
+ } manual_suspend_ctrl;
+
+ struct lightbar_params_v0 set_params_v0;
+ struct lightbar_params_v1 set_params_v1;
+
+ struct lightbar_params_v2_timing set_v2par_timing;
+ struct lightbar_params_v2_tap set_v2par_tap;
+ struct lightbar_params_v2_oscillation set_v2par_osc;
+ struct lightbar_params_v2_brightness set_v2par_bright;
+ struct lightbar_params_v2_thresholds set_v2par_thlds;
+ struct lightbar_params_v2_colors set_v2par_colors;
+
+ struct lightbar_program set_program;
};
-} __packed;
+};
-struct ec_response_lightbar {
+struct __ec_todo_packed ec_response_lightbar {
union {
- struct dump {
- struct {
+ struct __ec_todo_unpacked {
+ struct __ec_todo_unpacked {
uint8_t reg;
uint8_t ic0;
uint8_t ic1;
} vals[23];
} dump;
- struct get_seq {
+ struct __ec_todo_unpacked {
uint8_t num;
- } get_seq;
+ } get_seq, get_brightness, get_demo;
- struct lightbar_params get_params;
+ struct lightbar_params_v0 get_params_v0;
+ struct lightbar_params_v1 get_params_v1;
- struct {
+
+ struct lightbar_params_v2_timing get_params_v2_timing;
+ struct lightbar_params_v2_tap get_params_v2_tap;
+ struct lightbar_params_v2_oscillation get_params_v2_osc;
+ struct lightbar_params_v2_brightness get_params_v2_bright;
+ struct lightbar_params_v2_thresholds get_params_v2_thlds;
+ struct lightbar_params_v2_colors get_params_v2_colors;
+
+ struct __ec_todo_unpacked {
+ uint32_t num;
+ uint32_t flags;
+ } version;
+
+ struct __ec_todo_unpacked {
+ uint8_t red, green, blue;
+ } get_rgb;
+
+ struct __ec_todo_unpacked {
/* no return params */
- } off, on, init, brightness, seq, reg, rgb, demo, set_params;
+ } off, on, init, set_brightness, seq, reg, set_rgb,
+ demo, set_params_v0, set_params_v1,
+ set_program, manual_suspend_ctrl, suspend, resume,
+ set_v2par_timing, set_v2par_tap,
+ set_v2par_osc, set_v2par_bright, set_v2par_thlds,
+ set_v2par_colors;
};
-} __packed;
+};
/* Lightbar commands */
enum lightbar_command {
@@ -868,26 +1794,64 @@ enum lightbar_command {
LIGHTBAR_CMD_OFF = 1,
LIGHTBAR_CMD_ON = 2,
LIGHTBAR_CMD_INIT = 3,
- LIGHTBAR_CMD_BRIGHTNESS = 4,
+ LIGHTBAR_CMD_SET_BRIGHTNESS = 4,
LIGHTBAR_CMD_SEQ = 5,
LIGHTBAR_CMD_REG = 6,
- LIGHTBAR_CMD_RGB = 7,
+ LIGHTBAR_CMD_SET_RGB = 7,
LIGHTBAR_CMD_GET_SEQ = 8,
LIGHTBAR_CMD_DEMO = 9,
- LIGHTBAR_CMD_GET_PARAMS = 10,
- LIGHTBAR_CMD_SET_PARAMS = 11,
+ LIGHTBAR_CMD_GET_PARAMS_V0 = 10,
+ LIGHTBAR_CMD_SET_PARAMS_V0 = 11,
+ LIGHTBAR_CMD_VERSION = 12,
+ LIGHTBAR_CMD_GET_BRIGHTNESS = 13,
+ LIGHTBAR_CMD_GET_RGB = 14,
+ LIGHTBAR_CMD_GET_DEMO = 15,
+ LIGHTBAR_CMD_GET_PARAMS_V1 = 16,
+ LIGHTBAR_CMD_SET_PARAMS_V1 = 17,
+ LIGHTBAR_CMD_SET_PROGRAM = 18,
+ LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19,
+ LIGHTBAR_CMD_SUSPEND = 20,
+ LIGHTBAR_CMD_RESUME = 21,
+ LIGHTBAR_CMD_GET_PARAMS_V2_TIMING = 22,
+ LIGHTBAR_CMD_SET_PARAMS_V2_TIMING = 23,
+ LIGHTBAR_CMD_GET_PARAMS_V2_TAP = 24,
+ LIGHTBAR_CMD_SET_PARAMS_V2_TAP = 25,
+ LIGHTBAR_CMD_GET_PARAMS_V2_OSCILLATION = 26,
+ LIGHTBAR_CMD_SET_PARAMS_V2_OSCILLATION = 27,
+ LIGHTBAR_CMD_GET_PARAMS_V2_BRIGHTNESS = 28,
+ LIGHTBAR_CMD_SET_PARAMS_V2_BRIGHTNESS = 29,
+ LIGHTBAR_CMD_GET_PARAMS_V2_THRESHOLDS = 30,
+ LIGHTBAR_CMD_SET_PARAMS_V2_THRESHOLDS = 31,
+ LIGHTBAR_CMD_GET_PARAMS_V2_COLORS = 32,
+ LIGHTBAR_CMD_SET_PARAMS_V2_COLORS = 33,
LIGHTBAR_NUM_CMDS
};
/*****************************************************************************/
/* LED control commands */
-#define EC_CMD_LED_CONTROL 0x29
+#define EC_CMD_LED_CONTROL 0x0029
enum ec_led_id {
+ /* LED to indicate battery state of charge */
EC_LED_ID_BATTERY_LED = 0,
- EC_LED_ID_POWER_BUTTON_LED,
+ /*
+ * LED to indicate system power state (on or in suspend).
+ * May be on power button or on C-panel.
+ */
+ EC_LED_ID_POWER_LED,
+ /* LED on power adapter or its plug */
EC_LED_ID_ADAPTER_LED,
+ /* LED to indicate left side */
+ EC_LED_ID_LEFT_LED,
+ /* LED to indicate right side */
+ EC_LED_ID_RIGHT_LED,
+ /* LED to indicate recovery mode with HW_REINIT */
+ EC_LED_ID_RECOVERY_HW_REINIT_LED,
+ /* LED to indicate sysrq debug mode. */
+ EC_LED_ID_SYSRQ_DEBUG_LED,
+
+ EC_LED_ID_COUNT
};
/* LED control flags */
@@ -900,18 +1864,19 @@ enum ec_led_colors {
EC_LED_COLOR_BLUE,
EC_LED_COLOR_YELLOW,
EC_LED_COLOR_WHITE,
+ EC_LED_COLOR_AMBER,
EC_LED_COLOR_COUNT
};
-struct ec_params_led_control {
+struct __ec_align1 ec_params_led_control {
uint8_t led_id; /* Which LED to control */
uint8_t flags; /* Control flags */
uint8_t brightness[EC_LED_COLOR_COUNT];
-} __packed;
+};
-struct ec_response_led_control {
+struct __ec_align1 ec_response_led_control {
/*
* Available brightness value range.
*
@@ -920,7 +1885,7 @@ struct ec_response_led_control {
* Other values means the LED is control by PWM.
*/
uint8_t brightness_range[EC_LED_COLOR_COUNT];
-} __packed;
+};
/*****************************************************************************/
/* Verified boot commands */
@@ -931,9 +1896,9 @@ struct ec_response_led_control {
*/
/* Verified boot hash command */
-#define EC_CMD_VBOOT_HASH 0x2A
+#define EC_CMD_VBOOT_HASH 0x002A
-struct ec_params_vboot_hash {
+struct __ec_align4 ec_params_vboot_hash {
uint8_t cmd; /* enum ec_vboot_hash_cmd */
uint8_t hash_type; /* enum ec_vboot_hash_type */
uint8_t nonce_size; /* Nonce size; may be 0 */
@@ -941,9 +1906,9 @@ struct ec_params_vboot_hash {
uint32_t offset; /* Offset in flash to hash */
uint32_t size; /* Number of bytes to hash */
uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */
-} __packed;
+};
-struct ec_response_vboot_hash {
+struct __ec_align4 ec_response_vboot_hash {
uint8_t status; /* enum ec_vboot_hash_status */
uint8_t hash_type; /* enum ec_vboot_hash_type */
uint8_t digest_size; /* Size of hash digest in bytes */
@@ -951,7 +1916,7 @@ struct ec_response_vboot_hash {
uint32_t offset; /* Offset in flash which was hashed */
uint32_t size; /* Number of bytes hashed */
uint8_t hash_digest[64]; /* Hash digest data */
-} __packed;
+};
enum ec_vboot_hash_cmd {
EC_VBOOT_HASH_GET = 0, /* Get current hash status */
@@ -975,741 +1940,2662 @@ enum ec_vboot_hash_status {
* If one of these is specified, the EC will automatically update offset and
* size to the correct values for the specified image (RO or RW).
*/
-#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
-#define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
+#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe
+#define EC_VBOOT_HASH_OFFSET_ACTIVE 0xfffffffd
+#define EC_VBOOT_HASH_OFFSET_UPDATE 0xfffffffc
/*****************************************************************************/
-/* USB charging control commands */
+/*
+ * Motion sense commands. We'll make separate structs for sub-commands with
+ * different input args, so that we know how much to expect.
+ */
+#define EC_CMD_MOTION_SENSE_CMD 0x002B
-/* Set USB port charging mode */
-#define EC_CMD_USB_CHARGE_SET_MODE 0x30
+/* Motion sense commands */
+enum motionsense_command {
+ /*
+ * Dump command returns all motion sensor data including motion sense
+ * module flags and individual sensor flags.
+ */
+ MOTIONSENSE_CMD_DUMP = 0,
-struct ec_params_usb_charge_set_mode {
- uint8_t usb_port_id;
- uint8_t mode;
-} __packed;
+ /*
+ * Info command returns data describing the details of a given sensor,
+ * including enum motionsensor_type, enum motionsensor_location, and
+ * enum motionsensor_chip.
+ */
+ MOTIONSENSE_CMD_INFO = 1,
-/*****************************************************************************/
-/* Persistent storage for host */
+ /*
+ * EC Rate command is a setter/getter command for the EC sampling rate
+ * in milliseconds.
+ * It is per sensor, the EC run sample task at the minimum of all
+ * sensors EC_RATE.
+ * For sensors without hardware FIFO, EC_RATE should be equals to 1/ODR
+ * to collect all the sensor samples.
+ * For sensor with hardware FIFO, EC_RATE is used as the maximal delay
+ * to process of all motion sensors in milliseconds.
+ */
+ MOTIONSENSE_CMD_EC_RATE = 2,
-/* Maximum bytes that can be read/written in a single command */
-#define EC_PSTORE_SIZE_MAX 64
+ /*
+ * Sensor ODR command is a setter/getter command for the output data
+ * rate of a specific motion sensor in millihertz.
+ */
+ MOTIONSENSE_CMD_SENSOR_ODR = 3,
-/* Get persistent storage info */
-#define EC_CMD_PSTORE_INFO 0x40
+ /*
+ * Sensor range command is a setter/getter command for the range of
+ * a specified motion sensor in +/-G's or +/- deg/s.
+ */
+ MOTIONSENSE_CMD_SENSOR_RANGE = 4,
-struct ec_response_pstore_info {
- /* Persistent storage size, in bytes */
- uint32_t pstore_size;
- /* Access size; read/write offset and size must be a multiple of this */
- uint32_t access_size;
-} __packed;
+ /*
+ * Setter/getter command for the keyboard wake angle. When the lid
+ * angle is greater than this value, keyboard wake is disabled in S3,
+ * and when the lid angle goes less than this value, keyboard wake is
+ * enabled. Note, the lid angle measurement is an approximate,
+ * un-calibrated value, hence the wake angle isn't exact.
+ */
+ MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5,
-/*
- * Read persistent storage
- *
- * Response is params.size bytes of data.
- */
-#define EC_CMD_PSTORE_READ 0x41
+ /*
+ * Returns a single sensor data.
+ */
+ MOTIONSENSE_CMD_DATA = 6,
-struct ec_params_pstore_read {
- uint32_t offset; /* Byte offset to read */
- uint32_t size; /* Size to read in bytes */
-} __packed;
+ /*
+ * Return sensor fifo info.
+ */
+ MOTIONSENSE_CMD_FIFO_INFO = 7,
-/* Write persistent storage */
-#define EC_CMD_PSTORE_WRITE 0x42
+ /*
+ * Insert a flush element in the fifo and return sensor fifo info.
+ * The host can use that element to synchronize its operation.
+ */
+ MOTIONSENSE_CMD_FIFO_FLUSH = 8,
-struct ec_params_pstore_write {
- uint32_t offset; /* Byte offset to write */
- uint32_t size; /* Size to write in bytes */
- uint8_t data[EC_PSTORE_SIZE_MAX];
-} __packed;
+ /*
+ * Return a portion of the fifo.
+ */
+ MOTIONSENSE_CMD_FIFO_READ = 9,
-/*****************************************************************************/
-/* Real-time clock */
+ /*
+ * Perform low level calibration.
+ * On sensors that support it, ask to do offset calibration.
+ */
+ MOTIONSENSE_CMD_PERFORM_CALIB = 10,
-/* RTC params and response structures */
-struct ec_params_rtc {
- uint32_t time;
-} __packed;
+ /*
+ * Sensor Offset command is a setter/getter command for the offset
+ * used for calibration.
+ * The offsets can be calculated by the host, or via
+ * PERFORM_CALIB command.
+ */
+ MOTIONSENSE_CMD_SENSOR_OFFSET = 11,
-struct ec_response_rtc {
- uint32_t time;
-} __packed;
+ /*
+ * List available activities for a MOTION sensor.
+ * Indicates if they are enabled or disabled.
+ */
+ MOTIONSENSE_CMD_LIST_ACTIVITIES = 12,
-/* These use ec_response_rtc */
-#define EC_CMD_RTC_GET_VALUE 0x44
-#define EC_CMD_RTC_GET_ALARM 0x45
+ /*
+ * Activity management
+ * Enable/Disable activity recognition.
+ */
+ MOTIONSENSE_CMD_SET_ACTIVITY = 13,
-/* These all use ec_params_rtc */
-#define EC_CMD_RTC_SET_VALUE 0x46
-#define EC_CMD_RTC_SET_ALARM 0x47
+ /*
+ * Lid Angle
+ */
+ MOTIONSENSE_CMD_LID_ANGLE = 14,
-/*****************************************************************************/
-/* Port80 log access */
+ /*
+ * Allow the FIFO to trigger interrupt via MKBP events.
+ * By default the FIFO does not send interrupt to process the FIFO
+ * until the AP is ready or it is coming from a wakeup sensor.
+ */
+ MOTIONSENSE_CMD_FIFO_INT_ENABLE = 15,
-/* Get last port80 code from previous boot */
-#define EC_CMD_PORT80_LAST_BOOT 0x48
+ /*
+ * Spoof the readings of the sensors. The spoofed readings can be set
+ * to arbitrary values, or will lock to the last read actual values.
+ */
+ MOTIONSENSE_CMD_SPOOF = 16,
-struct ec_response_port80_last_boot {
- uint16_t code;
-} __packed;
+ /* Number of motionsense sub-commands. */
+ MOTIONSENSE_NUM_CMDS
+};
-/*****************************************************************************/
-/* Thermal engine commands */
+/* List of motion sensor types. */
+enum motionsensor_type {
+ MOTIONSENSE_TYPE_ACCEL = 0,
+ MOTIONSENSE_TYPE_GYRO = 1,
+ MOTIONSENSE_TYPE_MAG = 2,
+ MOTIONSENSE_TYPE_PROX = 3,
+ MOTIONSENSE_TYPE_LIGHT = 4,
+ MOTIONSENSE_TYPE_ACTIVITY = 5,
+ MOTIONSENSE_TYPE_BARO = 6,
+ MOTIONSENSE_TYPE_MAX,
+};
-/* Set thershold value */
-#define EC_CMD_THERMAL_SET_THRESHOLD 0x50
+/* List of motion sensor locations. */
+enum motionsensor_location {
+ MOTIONSENSE_LOC_BASE = 0,
+ MOTIONSENSE_LOC_LID = 1,
+ MOTIONSENSE_LOC_MAX,
+};
-struct ec_params_thermal_set_threshold {
- uint8_t sensor_type;
- uint8_t threshold_id;
- uint16_t value;
-} __packed;
+/* List of motion sensor chips. */
+enum motionsensor_chip {
+ MOTIONSENSE_CHIP_KXCJ9 = 0,
+ MOTIONSENSE_CHIP_LSM6DS0 = 1,
+ MOTIONSENSE_CHIP_BMI160 = 2,
+ MOTIONSENSE_CHIP_SI1141 = 3,
+ MOTIONSENSE_CHIP_SI1142 = 4,
+ MOTIONSENSE_CHIP_SI1143 = 5,
+ MOTIONSENSE_CHIP_KX022 = 6,
+ MOTIONSENSE_CHIP_L3GD20H = 7,
+ MOTIONSENSE_CHIP_BMA255 = 8,
+ MOTIONSENSE_CHIP_BMP280 = 9,
+ MOTIONSENSE_CHIP_OPT3001 = 10,
+};
-/* Get threshold value */
-#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
+struct __ec_todo_packed ec_response_motion_sensor_data {
+ /* Flags for each sensor. */
+ uint8_t flags;
+ /* sensor number the data comes from */
+ uint8_t sensor_num;
+ /* Each sensor is up to 3-axis. */
+ union {
+ int16_t data[3];
+ struct __ec_todo_packed {
+ uint16_t reserved;
+ uint32_t timestamp;
+ };
+ struct __ec_todo_unpacked {
+ uint8_t activity; /* motionsensor_activity */
+ uint8_t state;
+ int16_t add_info[2];
+ };
+ };
+};
-struct ec_params_thermal_get_threshold {
- uint8_t sensor_type;
- uint8_t threshold_id;
-} __packed;
+/* Note: used in ec_response_get_next_data */
+struct __ec_todo_packed ec_response_motion_sense_fifo_info {
+ /* Size of the fifo */
+ uint16_t size;
+ /* Amount of space used in the fifo */
+ uint16_t count;
+ /* Timestamp recorded in us */
+ uint32_t timestamp;
+ /* Total amount of vector lost */
+ uint16_t total_lost;
+ /* Lost events since the last fifo_info, per sensors */
+ uint16_t lost[0];
+};
-struct ec_response_thermal_get_threshold {
- uint16_t value;
-} __packed;
+struct __ec_todo_packed ec_response_motion_sense_fifo_data {
+ uint32_t number_data;
+ struct ec_response_motion_sensor_data data[0];
+};
-/* Toggle automatic fan control */
-#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
+/* List supported activity recognition */
+enum motionsensor_activity {
+ MOTIONSENSE_ACTIVITY_RESERVED = 0,
+ MOTIONSENSE_ACTIVITY_SIG_MOTION = 1,
+ MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2,
+};
-/* Get TMP006 calibration data */
-#define EC_CMD_TMP006_GET_CALIBRATION 0x53
+struct __ec_todo_unpacked ec_motion_sense_activity {
+ uint8_t sensor_num;
+ uint8_t activity; /* one of enum motionsensor_activity */
+ uint8_t enable; /* 1: enable, 0: disable */
+ uint8_t reserved;
+ uint16_t parameters[3]; /* activity dependent parameters */
+};
-struct ec_params_tmp006_get_calibration {
- uint8_t index;
-} __packed;
+/* Module flag masks used for the dump sub-command. */
+#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0)
-struct ec_response_tmp006_get_calibration {
- float s0;
- float b0;
- float b1;
- float b2;
-} __packed;
+/* Sensor flag masks used for the dump sub-command. */
+#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0)
-/* Set TMP006 calibration data */
-#define EC_CMD_TMP006_SET_CALIBRATION 0x54
+/*
+ * Flush entry for synchronization.
+ * data contains time stamp
+ */
+#define MOTIONSENSE_SENSOR_FLAG_FLUSH (1<<0)
+#define MOTIONSENSE_SENSOR_FLAG_TIMESTAMP (1<<1)
+#define MOTIONSENSE_SENSOR_FLAG_WAKEUP (1<<2)
+#define MOTIONSENSE_SENSOR_FLAG_TABLET_MODE (1<<3)
-struct ec_params_tmp006_set_calibration {
- uint8_t index;
- uint8_t reserved[3]; /* Reserved; set 0 */
- float s0;
- float b0;
- float b1;
- float b2;
-} __packed;
+/*
+ * Send this value for the data element to only perform a read. If you
+ * send any other value, the EC will interpret it as data to set and will
+ * return the actual value set.
+ */
+#define EC_MOTION_SENSE_NO_VALUE -1
-/*****************************************************************************/
-/* MKBP - Matrix KeyBoard Protocol */
+#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000
+
+/* MOTIONSENSE_CMD_SENSOR_OFFSET subcommand flag */
+/* Set Calibration information */
+#define MOTION_SENSE_SET_OFFSET 1
+
+#define LID_ANGLE_UNRELIABLE 500
+
+enum motionsense_spoof_mode {
+ /* Disable spoof mode. */
+ MOTIONSENSE_SPOOF_MODE_DISABLE = 0,
+
+ /* Enable spoof mode, but use provided component values. */
+ MOTIONSENSE_SPOOF_MODE_CUSTOM,
+
+ /* Enable spoof mode, but use the current sensor values. */
+ MOTIONSENSE_SPOOF_MODE_LOCK_CURRENT,
+
+ /* Query the current spoof mode status for the sensor. */
+ MOTIONSENSE_SPOOF_MODE_QUERY,
+};
+
+struct __ec_todo_packed ec_params_motion_sense {
+ uint8_t cmd;
+ union {
+ /* Used for MOTIONSENSE_CMD_DUMP */
+ struct __ec_todo_unpacked {
+ /*
+ * Maximal number of sensor the host is expecting.
+ * 0 means the host is only interested in the number
+ * of sensors controlled by the EC.
+ */
+ uint8_t max_sensor_count;
+ } dump;
+
+ /*
+ * Used for MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+ */
+ struct __ec_todo_unpacked {
+ /* Data to set or EC_MOTION_SENSE_NO_VALUE to read.
+ * kb_wake_angle: angle to wakup AP.
+ */
+ int16_t data;
+ } kb_wake_angle;
+
+ /* Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA
+ * and MOTIONSENSE_CMD_PERFORM_CALIB. */
+ struct __ec_todo_unpacked {
+ uint8_t sensor_num;
+ } info, info_3, data, fifo_flush, perform_calib,
+ list_activities;
+
+ /*
+ * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR
+ * and MOTIONSENSE_CMD_SENSOR_RANGE.
+ */
+ struct __ec_todo_unpacked {
+ uint8_t sensor_num;
+
+ /* Rounding flag, true for round-up, false for down. */
+ uint8_t roundup;
+
+ uint16_t reserved;
+
+ /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+ int32_t data;
+ } ec_rate, sensor_odr, sensor_range;
+
+ /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
+ struct __ec_todo_packed {
+ uint8_t sensor_num;
+
+ /*
+ * bit 0: If set (MOTION_SENSE_SET_OFFSET), set
+ * the calibration information in the EC.
+ * If unset, just retrieve calibration information.
+ */
+ uint16_t flags;
+
+ /*
+ * Temperature at calibration, in units of 0.01 C
+ * 0x8000: invalid / unknown.
+ * 0x0: 0C
+ * 0x7fff: +327.67C
+ */
+ int16_t temp;
+
+ /*
+ * Offset for calibration.
+ * Unit:
+ * Accelerometer: 1/1024 g
+ * Gyro: 1/1024 deg/s
+ * Compass: 1/16 uT
+ */
+ int16_t offset[3];
+ } sensor_offset;
+
+ /* Used for MOTIONSENSE_CMD_FIFO_INFO */
+ struct __ec_todo_unpacked {
+ } fifo_info;
+
+ /* Used for MOTIONSENSE_CMD_FIFO_READ */
+ struct __ec_todo_unpacked {
+ /*
+ * Number of expected vector to return.
+ * EC may return less or 0 if none available.
+ */
+ uint32_t max_data_vector;
+ } fifo_read;
+
+ struct ec_motion_sense_activity set_activity;
+
+ /* Used for MOTIONSENSE_CMD_LID_ANGLE */
+ struct __ec_todo_unpacked {
+ } lid_angle;
+
+ /* Used for MOTIONSENSE_CMD_FIFO_INT_ENABLE */
+ struct __ec_todo_unpacked {
+ /*
+ * 1: enable, 0 disable fifo,
+ * EC_MOTION_SENSE_NO_VALUE return value.
+ */
+ int8_t enable;
+ } fifo_int_enable;
+
+ /* Used for MOTIONSENSE_CMD_SPOOF */
+ struct __ec_todo_packed {
+ uint8_t sensor_id;
+
+ /* See enum motionsense_spoof_mode. */
+ uint8_t spoof_enable;
+
+ /* Ignored, used for alignment. */
+ uint8_t reserved;
+
+ /* Individual component values to spoof. */
+ int16_t components[3];
+ } spoof;
+ };
+};
+
+struct __ec_todo_packed ec_response_motion_sense {
+ union {
+ /* Used for MOTIONSENSE_CMD_DUMP */
+ struct __ec_todo_unpacked {
+ /* Flags representing the motion sensor module. */
+ uint8_t module_flags;
+
+ /* Number of sensors managed directly by the EC */
+ uint8_t sensor_count;
+
+ /*
+ * sensor data is truncated if response_max is too small
+ * for holding all the data.
+ */
+ struct ec_response_motion_sensor_data sensor[0];
+ } dump;
+
+ /* Used for MOTIONSENSE_CMD_INFO. */
+ struct __ec_todo_unpacked {
+ /* Should be element of enum motionsensor_type. */
+ uint8_t type;
+
+ /* Should be element of enum motionsensor_location. */
+ uint8_t location;
+
+ /* Should be element of enum motionsensor_chip. */
+ uint8_t chip;
+ } info;
+
+ /* Used for MOTIONSENSE_CMD_INFO version 3 */
+ struct __ec_todo_unpacked {
+ /* Should be element of enum motionsensor_type. */
+ uint8_t type;
+
+ /* Should be element of enum motionsensor_location. */
+ uint8_t location;
+
+ /* Should be element of enum motionsensor_chip. */
+ uint8_t chip;
+
+ /* Minimum sensor sampling frequency */
+ uint32_t min_frequency;
+
+ /* Maximum sensor sampling frequency */
+ uint32_t max_frequency;
+
+ /* Max number of sensor events that could be in fifo */
+ uint32_t fifo_max_event_count;
+ } info_3;
+
+ /* Used for MOTIONSENSE_CMD_DATA */
+ struct ec_response_motion_sensor_data data;
+
+ /*
+ * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR,
+ * MOTIONSENSE_CMD_SENSOR_RANGE,
+ * MOTIONSENSE_CMD_KB_WAKE_ANGLE,
+ * MOTIONSENSE_CMD_FIFO_INT_ENABLE and
+ * MOTIONSENSE_CMD_SPOOF.
+ */
+ struct __ec_todo_unpacked {
+ /* Current value of the parameter queried. */
+ int32_t ret;
+ } ec_rate, sensor_odr, sensor_range, kb_wake_angle,
+ fifo_int_enable, spoof;
+
+ /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
+ struct __ec_todo_unpacked {
+ int16_t temp;
+ int16_t offset[3];
+ } sensor_offset, perform_calib;
+
+ struct ec_response_motion_sense_fifo_info fifo_info, fifo_flush;
+
+ struct ec_response_motion_sense_fifo_data fifo_read;
+
+ struct __ec_todo_packed {
+ uint16_t reserved;
+ uint32_t enabled;
+ uint32_t disabled;
+ } list_activities;
+
+ struct __ec_todo_unpacked {
+ } set_activity;
+
+ /* Used for MOTIONSENSE_CMD_LID_ANGLE */
+ struct __ec_todo_unpacked {
+ /*
+ * Angle between 0 and 360 degree if available,
+ * LID_ANGLE_UNRELIABLE otherwise.
+ */
+ uint16_t value;
+ } lid_angle;
+ };
+};
+
+/*****************************************************************************/
+/* Force lid open command */
+
+/* Make lid event always open */
+#define EC_CMD_FORCE_LID_OPEN 0x002C
+
+struct __ec_align1 ec_params_force_lid_open {
+ uint8_t enabled;
+};
+
+/*****************************************************************************/
+/* Configure the behavior of the power button */
+#define EC_CMD_CONFIG_POWER_BUTTON 0x002D
+
+enum ec_config_power_button_flags {
+ /* Enable/Disable power button pulses for x86 devices */
+ EC_POWER_BUTTON_ENABLE_PULSE = (1 << 0),
+};
+
+struct __ec_align1 ec_params_config_power_button {
+ /* See enum ec_config_power_button_flags */
+ uint8_t flags;
+};
+
+/*****************************************************************************/
+/* USB charging control commands */
+
+/* Set USB port charging mode */
+#define EC_CMD_USB_CHARGE_SET_MODE 0x0030
+
+struct __ec_align1 ec_params_usb_charge_set_mode {
+ uint8_t usb_port_id;
+ uint8_t mode;
+};
+
+/*****************************************************************************/
+/* Persistent storage for host */
+
+/* Maximum bytes that can be read/written in a single command */
+#define EC_PSTORE_SIZE_MAX 64
+
+/* Get persistent storage info */
+#define EC_CMD_PSTORE_INFO 0x0040
+
+struct __ec_align4 ec_response_pstore_info {
+ /* Persistent storage size, in bytes */
+ uint32_t pstore_size;
+ /* Access size; read/write offset and size must be a multiple of this */
+ uint32_t access_size;
+};
+
+/*
+ * Read persistent storage
+ *
+ * Response is params.size bytes of data.
+ */
+#define EC_CMD_PSTORE_READ 0x0041
+
+struct __ec_align4 ec_params_pstore_read {
+ uint32_t offset; /* Byte offset to read */
+ uint32_t size; /* Size to read in bytes */
+};
+
+/* Write persistent storage */
+#define EC_CMD_PSTORE_WRITE 0x0042
+
+struct __ec_align4 ec_params_pstore_write {
+ uint32_t offset; /* Byte offset to write */
+ uint32_t size; /* Size to write in bytes */
+ uint8_t data[EC_PSTORE_SIZE_MAX];
+};
+
+/*****************************************************************************/
+/* Real-time clock */
+
+/* RTC params and response structures */
+struct __ec_align4 ec_params_rtc {
+ uint32_t time;
+};
+
+struct __ec_align4 ec_response_rtc {
+ uint32_t time;
+};
+
+/* These use ec_response_rtc */
+#define EC_CMD_RTC_GET_VALUE 0x0044
+#define EC_CMD_RTC_GET_ALARM 0x0045
+
+/* These all use ec_params_rtc */
+#define EC_CMD_RTC_SET_VALUE 0x0046
+#define EC_CMD_RTC_SET_ALARM 0x0047
+
+/* Pass as time param to SET_ALARM to clear the current alarm */
+#define EC_RTC_ALARM_CLEAR 0
+
+/*****************************************************************************/
+/* Port80 log access */
+
+/* Maximum entries that can be read/written in a single command */
+#define EC_PORT80_SIZE_MAX 32
+
+/* Get last port80 code from previous boot */
+#define EC_CMD_PORT80_LAST_BOOT 0x0048
+#define EC_CMD_PORT80_READ 0x0048
+
+enum ec_port80_subcmd {
+ EC_PORT80_GET_INFO = 0,
+ EC_PORT80_READ_BUFFER,
+};
+
+struct __ec_todo_packed ec_params_port80_read {
+ uint16_t subcmd;
+ union {
+ struct __ec_todo_unpacked {
+ uint32_t offset;
+ uint32_t num_entries;
+ } read_buffer;
+ };
+};
+
+struct __ec_todo_packed ec_response_port80_read {
+ union {
+ struct __ec_todo_unpacked {
+ uint32_t writes;
+ uint32_t history_size;
+ uint32_t last_boot;
+ } get_info;
+ struct __ec_todo_unpacked {
+ uint16_t codes[EC_PORT80_SIZE_MAX];
+ } data;
+ };
+};
+
+struct __ec_align2 ec_response_port80_last_boot {
+ uint16_t code;
+};
+
+/*****************************************************************************/
+/* Temporary secure storage for host verified boot use */
+
+/* Number of bytes in a vstore slot */
+#define EC_VSTORE_SLOT_SIZE 64
+
+/* Maximum number of vstore slots */
+#define EC_VSTORE_SLOT_MAX 32
+
+/* Get persistent storage info */
+#define EC_CMD_VSTORE_INFO 0x0049
+struct __ec_align_size1 ec_response_vstore_info {
+ /* Indicates which slots are locked */
+ uint32_t slot_locked;
+ /* Total number of slots available */
+ uint8_t slot_count;
+};
+
+/*
+ * Read temporary secure storage
+ *
+ * Response is EC_VSTORE_SLOT_SIZE bytes of data.
+ */
+#define EC_CMD_VSTORE_READ 0x004A
+
+struct __ec_align1 ec_params_vstore_read {
+ uint8_t slot; /* Slot to read from */
+};
+
+struct __ec_align1 ec_response_vstore_read {
+ uint8_t data[EC_VSTORE_SLOT_SIZE];
+};
+
+/*
+ * Write temporary secure storage and lock it.
+ */
+#define EC_CMD_VSTORE_WRITE 0x004B
+
+struct __ec_align1 ec_params_vstore_write {
+ uint8_t slot; /* Slot to write to */
+ uint8_t data[EC_VSTORE_SLOT_SIZE];
+};
+
+/*****************************************************************************/
+/* Thermal engine commands. Note that there are two implementations. We'll
+ * reuse the command number, but the data and behavior is incompatible.
+ * Version 0 is what originally shipped on Link.
+ * Version 1 separates the CPU thermal limits from the fan control.
+ */
+
+#define EC_CMD_THERMAL_SET_THRESHOLD 0x0050
+#define EC_CMD_THERMAL_GET_THRESHOLD 0x0051
+
+/* The version 0 structs are opaque. You have to know what they are for
+ * the get/set commands to make any sense.
+ */
+
+/* Version 0 - set */
+struct __ec_align2 ec_params_thermal_set_threshold {
+ uint8_t sensor_type;
+ uint8_t threshold_id;
+ uint16_t value;
+};
+
+/* Version 0 - get */
+struct __ec_align1 ec_params_thermal_get_threshold {
+ uint8_t sensor_type;
+ uint8_t threshold_id;
+};
+
+struct __ec_align2 ec_response_thermal_get_threshold {
+ uint16_t value;
+};
+
+
+/* The version 1 structs are visible. */
+enum ec_temp_thresholds {
+ EC_TEMP_THRESH_WARN = 0,
+ EC_TEMP_THRESH_HIGH,
+ EC_TEMP_THRESH_HALT,
+
+ EC_TEMP_THRESH_COUNT
+};
+
+/*
+ * Thermal configuration for one temperature sensor. Temps are in degrees K.
+ * Zero values will be silently ignored by the thermal task.
+ *
+ * Note that this structure is a sub-structure of
+ * ec_params_thermal_set_threshold_v1, but maintains its alignment there.
+ */
+struct __ec_align4 ec_thermal_config {
+ uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
+ uint32_t temp_fan_off; /* no active cooling needed */
+ uint32_t temp_fan_max; /* max active cooling needed */
+};
+
+/* Version 1 - get config for one sensor. */
+struct __ec_align4 ec_params_thermal_get_threshold_v1 {
+ uint32_t sensor_num;
+};
+/* This returns a struct ec_thermal_config */
+
+/* Version 1 - set config for one sensor.
+ * Use read-modify-write for best results! */
+struct __ec_align4 ec_params_thermal_set_threshold_v1 {
+ uint32_t sensor_num;
+ struct ec_thermal_config cfg;
+};
+/* This returns no data */
+
+/****************************************************************************/
+
+/* Toggle automatic fan control */
+#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052
+
+/* Version 1 of input params */
+struct __ec_align1 ec_params_auto_fan_ctrl_v1 {
+ uint8_t fan_idx;
+};
+
+/* Get/Set TMP006 calibration data */
+#define EC_CMD_TMP006_GET_CALIBRATION 0x0053
+#define EC_CMD_TMP006_SET_CALIBRATION 0x0054
+
+/*
+ * The original TMP006 calibration only needed four params, but now we need
+ * more. Since the algorithm is nothing but magic numbers anyway, we'll leave
+ * the params opaque. The v1 "get" response will include the algorithm number
+ * and how many params it requires. That way we can change the EC code without
+ * needing to update this file. We can also use a different algorithm on each
+ * sensor.
+ */
+
+/* This is the same struct for both v0 and v1. */
+struct __ec_align1 ec_params_tmp006_get_calibration {
+ uint8_t index;
+};
+
+/* Version 0 */
+struct __ec_align4 ec_response_tmp006_get_calibration_v0 {
+ float s0;
+ float b0;
+ float b1;
+ float b2;
+};
+
+struct __ec_align4 ec_params_tmp006_set_calibration_v0 {
+ uint8_t index;
+ uint8_t reserved[3];
+ float s0;
+ float b0;
+ float b1;
+ float b2;
+};
+
+/* Version 1 */
+struct __ec_align4 ec_response_tmp006_get_calibration_v1 {
+ uint8_t algorithm;
+ uint8_t num_params;
+ uint8_t reserved[2];
+ float val[0];
+};
+
+struct __ec_align4 ec_params_tmp006_set_calibration_v1 {
+ uint8_t index;
+ uint8_t algorithm;
+ uint8_t num_params;
+ uint8_t reserved;
+ float val[0];
+};
+
+
+/* Read raw TMP006 data */
+#define EC_CMD_TMP006_GET_RAW 0x0055
+
+struct __ec_align1 ec_params_tmp006_get_raw {
+ uint8_t index;
+};
+
+struct __ec_align4 ec_response_tmp006_get_raw {
+ int32_t t; /* In 1/100 K */
+ int32_t v; /* In nV */
+};
+
+/*****************************************************************************/
+/* MKBP - Matrix KeyBoard Protocol */
/*
* Read key state
*
* Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for
* expected response size.
+ *
+ * NOTE: This has been superseded by EC_CMD_MKBP_GET_NEXT_EVENT. If you wish
+ * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type
+ * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX.
*/
-#define EC_CMD_MKBP_STATE 0x60
+#define EC_CMD_MKBP_STATE 0x0060
+
+/*
+ * Provide information about various MKBP things. See enum ec_mkbp_info_type.
+ */
+#define EC_CMD_MKBP_INFO 0x0061
+
+struct __ec_align_size1 ec_response_mkbp_info {
+ uint32_t rows;
+ uint32_t cols;
+ /* Formerly "switches", which was 0. */
+ uint8_t reserved;
+};
+
+struct __ec_align1 ec_params_mkbp_info {
+ uint8_t info_type;
+ uint8_t event_type;
+};
+
+enum ec_mkbp_info_type {
+ /*
+ * Info about the keyboard matrix: number of rows and columns.
+ *
+ * Returns struct ec_response_mkbp_info.
+ */
+ EC_MKBP_INFO_KBD = 0,
+
+ /*
+ * For buttons and switches, info about which specifically are
+ * supported. event_type must be set to one of the values in enum
+ * ec_mkbp_event.
+ *
+ * For EC_MKBP_EVENT_BUTTON and EC_MKBP_EVENT_SWITCH, returns a 4 byte
+ * bitmask indicating which buttons or switches are present. See the
+ * bit inidices below.
+ */
+ EC_MKBP_INFO_SUPPORTED = 1,
+
+ /*
+ * Instantaneous state of buttons and switches.
+ *
+ * event_type must be set to one of the values in enum ec_mkbp_event.
+ *
+ * For EC_MKBP_EVENT_KEY_MATRIX, returns uint8_t key_matrix[13]
+ * indicating the current state of the keyboard matrix.
+ *
+ * For EC_MKBP_EVENT_HOST_EVENT, return uint32_t host_event, the raw
+ * event state.
+ *
+ * For EC_MKBP_EVENT_BUTTON, returns uint32_t buttons, indicating the
+ * state of supported buttons.
+ *
+ * For EC_MKBP_EVENT_SWITCH, returns uint32_t switches, indicating the
+ * state of supported switches.
+ */
+ EC_MKBP_INFO_CURRENT = 2,
+};
+
+/* Simulate key press */
+#define EC_CMD_MKBP_SIMULATE_KEY 0x0062
+
+struct __ec_align1 ec_params_mkbp_simulate_key {
+ uint8_t col;
+ uint8_t row;
+ uint8_t pressed;
+};
+
+/* Configure keyboard scanning */
+#define EC_CMD_MKBP_SET_CONFIG 0x0064
+#define EC_CMD_MKBP_GET_CONFIG 0x0065
+
+/* flags */
+enum mkbp_config_flags {
+ EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */
+};
+
+enum mkbp_config_valid {
+ EC_MKBP_VALID_SCAN_PERIOD = 1 << 0,
+ EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1,
+ EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3,
+ EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4,
+ EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5,
+ EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6,
+ EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7,
+};
+
+/*
+ * Configuration for our key scanning algorithm.
+ *
+ * Note that this is used as a sub-structure of
+ * ec_{params/response}_mkbp_get_config.
+ */
+struct __ec_align_size1 ec_mkbp_config {
+ uint32_t valid_mask; /* valid fields */
+ uint8_t flags; /* some flags (enum mkbp_config_flags) */
+ uint8_t valid_flags; /* which flags are valid */
+ uint16_t scan_period_us; /* period between start of scans */
+ /* revert to interrupt mode after no activity for this long */
+ uint32_t poll_timeout_us;
+ /*
+ * minimum post-scan relax time. Once we finish a scan we check
+ * the time until we are due to start the next one. If this time is
+ * shorter this field, we use this instead.
+ */
+ uint16_t min_post_scan_delay_us;
+ /* delay between setting up output and waiting for it to settle */
+ uint16_t output_settle_us;
+ uint16_t debounce_down_us; /* time for debounce on key down */
+ uint16_t debounce_up_us; /* time for debounce on key up */
+ /* maximum depth to allow for fifo (0 = no keyscan output) */
+ uint8_t fifo_max_depth;
+};
+
+struct __ec_align_size1 ec_params_mkbp_set_config {
+ struct ec_mkbp_config config;
+};
+
+struct __ec_align_size1 ec_response_mkbp_get_config {
+ struct ec_mkbp_config config;
+};
+
+/* Run the key scan emulation */
+#define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066
+
+enum ec_keyscan_seq_cmd {
+ EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */
+ EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */
+ EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */
+ EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */
+ EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */
+};
+
+enum ec_collect_flags {
+ /*
+ * Indicates this scan was processed by the EC. Due to timing, some
+ * scans may be skipped.
+ */
+ EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0,
+};
+
+struct __ec_align1 ec_collect_item {
+ uint8_t flags; /* some flags (enum ec_collect_flags) */
+};
+
+struct __ec_todo_packed ec_params_keyscan_seq_ctrl {
+ uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */
+ union {
+ struct __ec_align1 {
+ uint8_t active; /* still active */
+ uint8_t num_items; /* number of items */
+ /* Current item being presented */
+ uint8_t cur_item;
+ } status;
+ struct __ec_todo_unpacked {
+ /*
+ * Absolute time for this scan, measured from the
+ * start of the sequence.
+ */
+ uint32_t time_us;
+ uint8_t scan[0]; /* keyscan data */
+ } add;
+ struct __ec_align1 {
+ uint8_t start_item; /* First item to return */
+ uint8_t num_items; /* Number of items to return */
+ } collect;
+ };
+};
+
+struct __ec_todo_packed ec_result_keyscan_seq_ctrl {
+ union {
+ struct __ec_todo_unpacked {
+ uint8_t num_items; /* Number of items */
+ /* Data for each item */
+ struct ec_collect_item item[0];
+ } collect;
+ };
+};
+
+/*
+ * Get the next pending MKBP event.
+ *
+ * Returns EC_RES_UNAVAILABLE if there is no event pending.
+ */
+#define EC_CMD_GET_NEXT_EVENT 0x0067
+
+enum ec_mkbp_event {
+ /* Keyboard matrix changed. The event data is the new matrix state. */
+ EC_MKBP_EVENT_KEY_MATRIX = 0,
+
+ /* New host event. The event data is 4 bytes of host event flags. */
+ EC_MKBP_EVENT_HOST_EVENT = 1,
+
+ /* New Sensor FIFO data. The event data is fifo_info structure. */
+ EC_MKBP_EVENT_SENSOR_FIFO = 2,
+
+ /* The state of the non-matrixed buttons have changed. */
+ EC_MKBP_EVENT_BUTTON = 3,
+
+ /* The state of the switches have changed. */
+ EC_MKBP_EVENT_SWITCH = 4,
+
+ /* New Fingerprint sensor event, the event data is fp_events bitmap. */
+ EC_MKBP_EVENT_FINGERPRINT = 5,
+
+ /*
+ * Sysrq event: send emulated sysrq. The event data is sysrq,
+ * corresponding to the key to be pressed.
+ */
+ EC_MKBP_EVENT_SYSRQ = 6,
+
+ /* Number of MKBP events */
+ EC_MKBP_EVENT_COUNT,
+};
+
+union __ec_align_offset1 ec_response_get_next_data {
+ uint8_t key_matrix[13];
+
+ /* Unaligned */
+ uint32_t host_event;
+
+ struct __ec_todo_unpacked {
+ /* For aligning the fifo_info */
+ uint8_t reserved[3];
+ struct ec_response_motion_sense_fifo_info info;
+ } sensor_fifo;
+
+ uint32_t buttons;
+
+ uint32_t switches;
+
+ uint32_t fp_events;
+
+ uint32_t sysrq;
+};
+
+struct __ec_align1 ec_response_get_next_event {
+ uint8_t event_type;
+ /* Followed by event data if any */
+ union ec_response_get_next_data data;
+};
+
+/* Bit indices for buttons and switches.*/
+/* Buttons */
+#define EC_MKBP_POWER_BUTTON 0
+#define EC_MKBP_VOL_UP 1
+#define EC_MKBP_VOL_DOWN 2
+#define EC_MKBP_RECOVERY 3
+
+/* Switches */
+#define EC_MKBP_LID_OPEN 0
+#define EC_MKBP_TABLET_MODE 1
+
+/* Run keyboard factory test scanning */
+#define EC_CMD_KEYBOARD_FACTORY_TEST 0x0068
+
+struct __ec_align2 ec_response_keyboard_factory_test {
+ uint16_t shorted; /* Keyboard pins are shorted */
+};
+
+/* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */
+#define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF)
+#define EC_MKBP_FP_FINGER_DOWN (1 << 29)
+#define EC_MKBP_FP_FINGER_UP (1 << 30)
+#define EC_MKBP_FP_IMAGE_READY (1 << 31)
+
+/*****************************************************************************/
+/* Temperature sensor commands */
+
+/* Read temperature sensor info */
+#define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070
+
+struct __ec_align1 ec_params_temp_sensor_get_info {
+ uint8_t id;
+};
+
+struct __ec_align1 ec_response_temp_sensor_get_info {
+ char sensor_name[32];
+ uint8_t sensor_type;
+};
+
+/*****************************************************************************/
+
+/*
+ * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI
+ * commands accidentally sent to the wrong interface. See the ACPI section
+ * below.
+ */
+
+/*****************************************************************************/
+/* Host event commands */
+
+
+/* Obsolete. New implementation should use EC_CMD_PROGRAM_HOST_EVENT instead */
+/*
+ * Host event mask params and response structures, shared by all of the host
+ * event commands below.
+ */
+struct __ec_align4 ec_params_host_event_mask {
+ uint32_t mask;
+};
+
+struct __ec_align4 ec_response_host_event_mask {
+ uint32_t mask;
+};
+
+/* These all use ec_response_host_event_mask */
+#define EC_CMD_HOST_EVENT_GET_B 0x0087
+#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x0088
+#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x0089
+#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D
+
+/* These all use ec_params_host_event_mask */
+#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x008A
+#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x008B
+#define EC_CMD_HOST_EVENT_CLEAR 0x008C
+#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E
+#define EC_CMD_HOST_EVENT_CLEAR_B 0x008F
+
+/*
+ * Unified host event programming interface - Should be used by newer versions
+ * of BIOS/OS to program host events and masks
+ */
+
+struct __ec_align4 ec_params_host_event {
+
+ /* Action requested by host - one of enum ec_host_event_action. */
+ uint8_t action;
+
+ /*
+ * Mask type that the host requested the action on - one of
+ * enum ec_host_event_mask_type.
+ */
+ uint8_t mask_type;
+
+ /* Set to 0, ignore on read */
+ uint16_t reserved;
+
+ /* Value to be used in case of set operations. */
+ uint64_t value;
+};
+
+/*
+ * Response structure returned by EC_CMD_HOST_EVENT.
+ * Update the value on a GET request. Set to 0 on GET/CLEAR
+ */
+
+struct __ec_align4 ec_response_host_event {
+
+ /* Mask value in case of get operation */
+ uint64_t value;
+};
+
+enum ec_host_event_action {
+ /*
+ * params.value is ignored. Value of mask_type populated
+ * in response.value
+ */
+ EC_HOST_EVENT_GET,
+
+ /* Bits in params.value are set */
+ EC_HOST_EVENT_SET,
+
+ /* Bits in params.value are cleared */
+ EC_HOST_EVENT_CLEAR,
+};
+
+enum ec_host_event_mask_type {
+
+ /* Main host event copy */
+ EC_HOST_EVENT_MAIN,
+
+ /* Copy B of host events */
+ EC_HOST_EVENT_B,
+
+ /* SCI Mask */
+ EC_HOST_EVENT_SCI_MASK,
+
+ /* SMI Mask */
+ EC_HOST_EVENT_SMI_MASK,
+
+ /* Mask of events that should be always reported in hostevents */
+ EC_HOST_EVENT_ALWAYS_REPORT_MASK,
+
+ /* Active wake mask */
+ EC_HOST_EVENT_ACTIVE_WAKE_MASK,
+
+ /* Lazy wake mask for S0ix */
+ EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX,
+
+ /* Lazy wake mask for S3 */
+ EC_HOST_EVENT_LAZY_WAKE_MASK_S3,
+
+ /* Lazy wake mask for S5 */
+ EC_HOST_EVENT_LAZY_WAKE_MASK_S5,
+};
+
+#define EC_CMD_HOST_EVENT 0x00A4
+
+/*****************************************************************************/
+/* Switch commands */
+
+/* Enable/disable LCD backlight */
+#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090
+
+struct __ec_align1 ec_params_switch_enable_backlight {
+ uint8_t enabled;
+};
+
+/* Enable/disable WLAN/Bluetooth */
+#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091
+#define EC_VER_SWITCH_ENABLE_WIRELESS 1
+
+/* Version 0 params; no response */
+struct __ec_align1 ec_params_switch_enable_wireless_v0 {
+ uint8_t enabled;
+};
+
+/* Version 1 params */
+struct __ec_align1 ec_params_switch_enable_wireless_v1 {
+ /* Flags to enable now */
+ uint8_t now_flags;
+
+ /* Which flags to copy from now_flags */
+ uint8_t now_mask;
+
+ /*
+ * Flags to leave enabled in S3, if they're on@the S0->S3
+ * transition. (Other flags will be disabled by the S0->S3
+ * transition.)
+ */
+ uint8_t suspend_flags;
+
+ /* Which flags to copy from suspend_flags */
+ uint8_t suspend_mask;
+};
+
+/* Version 1 response */
+struct __ec_align1 ec_response_switch_enable_wireless_v1 {
+ /* Flags to enable now */
+ uint8_t now_flags;
+
+ /* Flags to leave enabled in S3 */
+ uint8_t suspend_flags;
+};
+
+/*****************************************************************************/
+/* GPIO commands. Only available on EC if write protect has been disabled. */
+
+/* Set GPIO output value */
+#define EC_CMD_GPIO_SET 0x0092
+
+struct __ec_align1 ec_params_gpio_set {
+ char name[32];
+ uint8_t val;
+};
+
+/* Get GPIO value */
+#define EC_CMD_GPIO_GET 0x0093
+
+/* Version 0 of input params and response */
+struct __ec_align1 ec_params_gpio_get {
+ char name[32];
+};
+
+struct __ec_align1 ec_response_gpio_get {
+ uint8_t val;
+};
+
+/* Version 1 of input params and response */
+struct __ec_align1 ec_params_gpio_get_v1 {
+ uint8_t subcmd;
+ union {
+ struct __ec_align1 {
+ char name[32];
+ } get_value_by_name;
+ struct __ec_align1 {
+ uint8_t index;
+ } get_info;
+ };
+};
+
+struct __ec_todo_packed ec_response_gpio_get_v1 {
+ union {
+ struct __ec_align1 {
+ uint8_t val;
+ } get_value_by_name, get_count;
+ struct __ec_todo_unpacked {
+ uint8_t val;
+ char name[32];
+ uint32_t flags;
+ } get_info;
+ };
+};
+
+enum gpio_get_subcmd {
+ EC_GPIO_GET_BY_NAME = 0,
+ EC_GPIO_GET_COUNT = 1,
+ EC_GPIO_GET_INFO = 2,
+};
+
+/*****************************************************************************/
+/* I2C commands. Only available when flash write protect is unlocked. */
+
+/*
+ * CAUTION: These commands are deprecated, and are not supported anymore in EC
+ * builds >= 8398.0.0 (see crosbug.com/p/23570).
+ *
+ * Use EC_CMD_I2C_PASSTHRU instead.
+ */
+
+/* Read I2C bus */
+#define EC_CMD_I2C_READ 0x0094
+
+struct __ec_align_size1 ec_params_i2c_read {
+ uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
+ uint8_t read_size; /* Either 8 or 16. */
+ uint8_t port;
+ uint8_t offset;
+};
+
+struct __ec_align2 ec_response_i2c_read {
+ uint16_t data;
+};
+
+/* Write I2C bus */
+#define EC_CMD_I2C_WRITE 0x0095
+
+struct __ec_align_size1 ec_params_i2c_write {
+ uint16_t data;
+ uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
+ uint8_t write_size; /* Either 8 or 16. */
+ uint8_t port;
+ uint8_t offset;
+};
+
+/*****************************************************************************/
+/* Charge state commands. Only available when flash write protect unlocked. */
+
+/* Force charge state machine to stop charging the battery or force it to
+ * discharge the battery.
+ */
+#define EC_CMD_CHARGE_CONTROL 0x0096
+#define EC_VER_CHARGE_CONTROL 1
+
+enum ec_charge_control_mode {
+ CHARGE_CONTROL_NORMAL = 0,
+ CHARGE_CONTROL_IDLE,
+ CHARGE_CONTROL_DISCHARGE,
+};
+
+struct __ec_align4 ec_params_charge_control {
+ uint32_t mode; /* enum charge_control_mode */
+};
+
+/*****************************************************************************/
+/* Console commands. Only available when flash write protect is unlocked. */
+
+/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
+#define EC_CMD_CONSOLE_SNAPSHOT 0x0097
+
+/*
+ * Read data from the saved snapshot. If the subcmd parameter is
+ * CONSOLE_READ_NEXT, this will return data starting from the beginning of
+ * the latest snapshot. If it is CONSOLE_READ_RECENT, it will start from the
+ * end of the previous snapshot.
+ *
+ * The params are only looked@in version >= 1 of this command. Prior
+ * versions will just default to CONSOLE_READ_NEXT behavior.
+ *
+ * Response is null-terminated string. Empty string, if there is no more
+ * remaining output.
+ */
+#define EC_CMD_CONSOLE_READ 0x0098
+
+enum ec_console_read_subcmd {
+ CONSOLE_READ_NEXT = 0,
+ CONSOLE_READ_RECENT
+};
+
+struct __ec_align1 ec_params_console_read_v1 {
+ uint8_t subcmd; /* enum ec_console_read_subcmd */
+};
+
+/*****************************************************************************/
+
+/*
+ * Cut off battery power immediately or after the host has shut down.
+ *
+ * return EC_RES_INVALID_COMMAND if unsupported by a board/battery.
+ * EC_RES_SUCCESS if the command was successful.
+ * EC_RES_ERROR if the cut off command failed.
+ */
+#define EC_CMD_BATTERY_CUT_OFF 0x0099
+
+#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN (1 << 0)
+
+struct __ec_align1 ec_params_battery_cutoff {
+ uint8_t flags;
+};
+
+/*****************************************************************************/
+/* USB port mux control. */
+
+/*
+ * Switch USB mux or return to automatic switching.
+ */
+#define EC_CMD_USB_MUX 0x009A
+
+struct __ec_align1 ec_params_usb_mux {
+ uint8_t mux;
+};
+
+/*****************************************************************************/
+/* LDOs / FETs control. */
+
+enum ec_ldo_state {
+ EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */
+ EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */
+};
+
+/*
+ * Switch on/off a LDO.
+ */
+#define EC_CMD_LDO_SET 0x009B
+
+struct __ec_align1 ec_params_ldo_set {
+ uint8_t index;
+ uint8_t state;
+};
+
+/*
+ * Get LDO state.
+ */
+#define EC_CMD_LDO_GET 0x009C
+
+struct __ec_align1 ec_params_ldo_get {
+ uint8_t index;
+};
+
+struct __ec_align1 ec_response_ldo_get {
+ uint8_t state;
+};
+
+/*****************************************************************************/
+/* Power info. */
+
+/*
+ * Get power info.
+ */
+#define EC_CMD_POWER_INFO 0x009D
+
+struct __ec_align4 ec_response_power_info {
+ uint32_t usb_dev_type;
+ uint16_t voltage_ac;
+ uint16_t voltage_system;
+ uint16_t current_system;
+ uint16_t usb_current_limit;
+};
+
+/*****************************************************************************/
+/* I2C passthru command */
+
+#define EC_CMD_I2C_PASSTHRU 0x009E
+
+/* Read data; if not present, message is a write */
+#define EC_I2C_FLAG_READ (1 << 15)
+
+/* Mask for address */
+#define EC_I2C_ADDR_MASK 0x3ff
+
+#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */
+#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */
+
+/* Any error */
+#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
+
+struct __ec_align2 ec_params_i2c_passthru_msg {
+ uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */
+ uint16_t len; /* Number of bytes to read or write */
+};
+
+struct __ec_align2 ec_params_i2c_passthru {
+ uint8_t port; /* I2C port number */
+ uint8_t num_msgs; /* Number of messages */
+ struct ec_params_i2c_passthru_msg msg[];
+ /* Data to write for all messages is concatenated here */
+};
+
+struct __ec_align1 ec_response_i2c_passthru {
+ uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */
+ uint8_t num_msgs; /* Number of messages processed */
+ uint8_t data[]; /* Data read by messages concatenated here */
+};
+
+/*****************************************************************************/
+/* Power button hang detect */
+
+#define EC_CMD_HANG_DETECT 0x009F
+
+/* Reasons to start hang detection timer */
+/* Power button pressed */
+#define EC_HANG_START_ON_POWER_PRESS (1 << 0)
+
+/* Lid closed */
+#define EC_HANG_START_ON_LID_CLOSE (1 << 1)
+
+ /* Lid opened */
+#define EC_HANG_START_ON_LID_OPEN (1 << 2)
+
+/* Start of AP S3->S0 transition (booting or resuming from suspend) */
+#define EC_HANG_START_ON_RESUME (1 << 3)
+
+/* Reasons to cancel hang detection */
+
+/* Power button released */
+#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8)
+
+/* Any host command from AP received */
+#define EC_HANG_STOP_ON_HOST_COMMAND (1 << 9)
+
+/* Stop on end of AP S0->S3 transition (suspending or shutting down) */
+#define EC_HANG_STOP_ON_SUSPEND (1 << 10)
+
+/*
+ * If this flag is set, all the other fields are ignored, and the hang detect
+ * timer is started. This provides the AP a way to start the hang timer
+ * without reconfiguring any of the other hang detect settings. Note that
+ * you must previously have configured the timeouts.
+ */
+#define EC_HANG_START_NOW (1 << 30)
+
+/*
+ * If this flag is set, all the other fields are ignored (including
+ * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer
+ * without reconfiguring any of the other hang detect settings.
+ */
+#define EC_HANG_STOP_NOW (1 << 31)
+
+struct __ec_align4 ec_params_hang_detect {
+ /* Flags; see EC_HANG_* */
+ uint32_t flags;
+
+ /* Timeout in msec before generating host event, if enabled */
+ uint16_t host_event_timeout_msec;
+
+ /* Timeout in msec before generating warm reboot, if enabled */
+ uint16_t warm_reboot_timeout_msec;
+};
+
+/*****************************************************************************/
+/* Commands for battery charging */
+
+/*
+ * This is the single catch-all host command to exchange data regarding the
+ * charge state machine (v2 and up).
+ */
+#define EC_CMD_CHARGE_STATE 0x00A0
+
+/* Subcommands for this host command */
+enum charge_state_command {
+ CHARGE_STATE_CMD_GET_STATE,
+ CHARGE_STATE_CMD_GET_PARAM,
+ CHARGE_STATE_CMD_SET_PARAM,
+ CHARGE_STATE_NUM_CMDS
+};
+
+/*
+ * Known param numbers are defined here. Ranges are reserved for board-specific
+ * params, which are handled by the particular implementations.
+ */
+enum charge_state_params {
+ CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */
+ CS_PARAM_CHG_CURRENT, /* charger current limit */
+ CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */
+ CS_PARAM_CHG_STATUS, /* charger-specific status */
+ CS_PARAM_CHG_OPTION, /* charger-specific options */
+ CS_PARAM_LIMIT_POWER, /*
+ * Check if power is limited due to
+ * low battery and / or a weak external
+ * charger. READ ONLY.
+ */
+ /* How many so far? */
+ CS_NUM_BASE_PARAMS,
+
+ /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */
+ CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000,
+ CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff,
+
+ /* Other custom param ranges go here... */
+};
+
+struct __ec_todo_packed ec_params_charge_state {
+ uint8_t cmd; /* enum charge_state_command */
+ union {
+ struct __ec_align1 {
+ /* no args */
+ } get_state;
+
+ struct __ec_todo_unpacked {
+ uint32_t param; /* enum charge_state_param */
+ } get_param;
+
+ struct __ec_todo_unpacked {
+ uint32_t param; /* param to set */
+ uint32_t value; /* value to set */
+ } set_param;
+ };
+};
+
+struct __ec_align4 ec_response_charge_state {
+ union {
+ struct __ec_align4 {
+ int ac;
+ int chg_voltage;
+ int chg_current;
+ int chg_input_current;
+ int batt_state_of_charge;
+ } get_state;
+
+ struct __ec_align4 {
+ uint32_t value;
+ } get_param;
+ struct __ec_align4 {
+ /* no return values */
+ } set_param;
+ };
+};
+
+
+/*
+ * Set maximum battery charging current.
+ */
+#define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1
+
+struct __ec_align4 ec_params_current_limit {
+ uint32_t limit; /* in mA */
+};
+
+/*
+ * Set maximum external voltage / current.
+ */
+#define EC_CMD_EXTERNAL_POWER_LIMIT 0x00A2
+
+/* Command v0 is used only on Spring and is obsolete + unsupported */
+struct __ec_align2 ec_params_external_power_limit_v1 {
+ uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */
+ uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */
+};
+
+#define EC_POWER_LIMIT_NONE 0xffff
+
+/*
+ * Set maximum voltage & current of a dedicated charge port
+ */
+#define EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT 0x00A3
+
+struct __ec_align2 ec_params_dedicated_charger_limit {
+ uint16_t current_lim; /* in mA */
+ uint16_t voltage_lim; /* in mV */
+};
+
+/*****************************************************************************/
+/* Hibernate/Deep Sleep Commands */
+
+/* Set the delay before going into hibernation. */
+#define EC_CMD_HIBERNATION_DELAY 0x00A8
+
+struct __ec_align4 ec_params_hibernation_delay {
+ /*
+ * Seconds to wait in G3 before hibernate. Pass in 0 to read the
+ * current settings without changing them.
+ */
+ uint32_t seconds;
+};
+
+struct __ec_align4 ec_response_hibernation_delay {
+ /*
+ * The current time in seconds in which the system has been in the G3
+ * state. This value is reset if the EC transitions out of G3.
+ */
+ uint32_t time_g3;
+
+ /*
+ * The current time remaining in seconds until the EC should hibernate.
+ * This value is also reset if the EC transitions out of G3.
+ */
+ uint32_t time_remaining;
+
+ /*
+ * The current time in seconds that the EC should wait in G3 before
+ * hibernating.
+ */
+ uint32_t hibernate_delay;
+};
+
+/* Inform the EC when entering a sleep state */
+#define EC_CMD_HOST_SLEEP_EVENT 0x00A9
+
+enum host_sleep_event {
+ HOST_SLEEP_EVENT_S3_SUSPEND = 1,
+ HOST_SLEEP_EVENT_S3_RESUME = 2,
+ HOST_SLEEP_EVENT_S0IX_SUSPEND = 3,
+ HOST_SLEEP_EVENT_S0IX_RESUME = 4
+};
+
+struct __ec_align1 ec_params_host_sleep_event {
+ uint8_t sleep_event;
+};
+
+/*****************************************************************************/
+/* Device events */
+#define EC_CMD_DEVICE_EVENT 0x00AA
+
+enum ec_device_event {
+ EC_DEVICE_EVENT_TRACKPAD,
+ EC_DEVICE_EVENT_DSP,
+ EC_DEVICE_EVENT_WIFI,
+};
+
+enum ec_device_event_param {
+ /* Get and clear pending device events */
+ EC_DEVICE_EVENT_PARAM_GET_CURRENT_EVENTS,
+ /* Get device event mask */
+ EC_DEVICE_EVENT_PARAM_GET_ENABLED_EVENTS,
+ /* Set device event mask */
+ EC_DEVICE_EVENT_PARAM_SET_ENABLED_EVENTS,
+};
+
+#define EC_DEVICE_EVENT_MASK(event_code) (1UL << (event_code % 32))
-/* Provide information about the matrix : number of rows and columns */
-#define EC_CMD_MKBP_INFO 0x61
+struct __ec_align_size1 ec_params_device_event {
+ uint32_t event_mask;
+ uint8_t param;
+};
-struct ec_response_mkbp_info {
- uint32_t rows;
- uint32_t cols;
- uint8_t switches;
-} __packed;
+struct __ec_align4 ec_response_device_event {
+ uint32_t event_mask;
+};
-/* Simulate key press */
-#define EC_CMD_MKBP_SIMULATE_KEY 0x62
+/*****************************************************************************/
+/* Smart battery pass-through */
-struct ec_params_mkbp_simulate_key {
- uint8_t col;
- uint8_t row;
- uint8_t pressed;
-} __packed;
+/* Get / Set 16-bit smart battery registers */
+#define EC_CMD_SB_READ_WORD 0x00B0
+#define EC_CMD_SB_WRITE_WORD 0x00B1
-/* Configure keyboard scanning */
-#define EC_CMD_MKBP_SET_CONFIG 0x64
-#define EC_CMD_MKBP_GET_CONFIG 0x65
+/* Get / Set string smart battery parameters
+ * formatted as SMBUS "block".
+ */
+#define EC_CMD_SB_READ_BLOCK 0x00B2
+#define EC_CMD_SB_WRITE_BLOCK 0x00B3
-/* flags */
-enum mkbp_config_flags {
- EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */
+struct __ec_align1 ec_params_sb_rd {
+ uint8_t reg;
};
-enum mkbp_config_valid {
- EC_MKBP_VALID_SCAN_PERIOD = 1 << 0,
- EC_MKBP_VALID_POLL_TIMEOUT = 1 << 1,
- EC_MKBP_VALID_MIN_POST_SCAN_DELAY = 1 << 3,
- EC_MKBP_VALID_OUTPUT_SETTLE = 1 << 4,
- EC_MKBP_VALID_DEBOUNCE_DOWN = 1 << 5,
- EC_MKBP_VALID_DEBOUNCE_UP = 1 << 6,
- EC_MKBP_VALID_FIFO_MAX_DEPTH = 1 << 7,
+struct __ec_align2 ec_response_sb_rd_word {
+ uint16_t value;
};
-/* Configuration for our key scanning algorithm */
-struct ec_mkbp_config {
- uint32_t valid_mask; /* valid fields */
- uint8_t flags; /* some flags (enum mkbp_config_flags) */
- uint8_t valid_flags; /* which flags are valid */
- uint16_t scan_period_us; /* period between start of scans */
- /* revert to interrupt mode after no activity for this long */
- uint32_t poll_timeout_us;
- /*
- * minimum post-scan relax time. Once we finish a scan we check
- * the time until we are due to start the next one. If this time is
- * shorter this field, we use this instead.
- */
- uint16_t min_post_scan_delay_us;
- /* delay between setting up output and waiting for it to settle */
- uint16_t output_settle_us;
- uint16_t debounce_down_us; /* time for debounce on key down */
- uint16_t debounce_up_us; /* time for debounce on key up */
- /* maximum depth to allow for fifo (0 = no keyscan output) */
- uint8_t fifo_max_depth;
-} __packed;
+struct __ec_align1 ec_params_sb_wr_word {
+ uint8_t reg;
+ uint16_t value;
+};
-struct ec_params_mkbp_set_config {
- struct ec_mkbp_config config;
-} __packed;
+struct __ec_align1 ec_response_sb_rd_block {
+ uint8_t data[32];
+};
-struct ec_response_mkbp_get_config {
- struct ec_mkbp_config config;
-} __packed;
+struct __ec_align1 ec_params_sb_wr_block {
+ uint8_t reg;
+ uint16_t data[32];
+};
-/* Run the key scan emulation */
-#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
+/*****************************************************************************/
+/* Battery vendor parameters
+ *
+ * Get or set vendor-specific parameters in the battery. Implementations may
+ * differ between boards or batteries. On a set operation, the response
+ * contains the actual value set, which may be rounded or clipped from the
+ * requested value.
+ */
-enum ec_keyscan_seq_cmd {
- EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */
- EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */
- EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */
- EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */
- EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */
+#define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4
+
+enum ec_battery_vendor_param_mode {
+ BATTERY_VENDOR_PARAM_MODE_GET = 0,
+ BATTERY_VENDOR_PARAM_MODE_SET,
};
-enum ec_collect_flags {
- /*
- * Indicates this scan was processed by the EC. Due to timing, some
- * scans may be skipped.
- */
- EC_KEYSCAN_SEQ_FLAG_DONE = 1 << 0,
+struct __ec_align_size1 ec_params_battery_vendor_param {
+ uint32_t param;
+ uint32_t value;
+ uint8_t mode;
};
-struct ec_collect_item {
- uint8_t flags; /* some flags (enum ec_collect_flags) */
+struct __ec_align4 ec_response_battery_vendor_param {
+ uint32_t value;
};
-struct ec_params_keyscan_seq_ctrl {
- uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */
+/*****************************************************************************/
+/*
+ * Smart Battery Firmware Update Commands
+ */
+#define EC_CMD_SB_FW_UPDATE 0x00B5
+
+enum ec_sb_fw_update_subcmd {
+ EC_SB_FW_UPDATE_PREPARE = 0x0,
+ EC_SB_FW_UPDATE_INFO = 0x1, /*query sb info */
+ EC_SB_FW_UPDATE_BEGIN = 0x2, /*check if protected */
+ EC_SB_FW_UPDATE_WRITE = 0x3, /*check if protected */
+ EC_SB_FW_UPDATE_END = 0x4,
+ EC_SB_FW_UPDATE_STATUS = 0x5,
+ EC_SB_FW_UPDATE_PROTECT = 0x6,
+ EC_SB_FW_UPDATE_MAX = 0x7,
+};
+
+#define SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE 32
+#define SB_FW_UPDATE_CMD_STATUS_SIZE 2
+#define SB_FW_UPDATE_CMD_INFO_SIZE 8
+
+struct __ec_align4 ec_sb_fw_update_header {
+ uint16_t subcmd; /* enum ec_sb_fw_update_subcmd */
+ uint16_t fw_id; /* firmware id */
+};
+
+struct __ec_align4 ec_params_sb_fw_update {
+ struct ec_sb_fw_update_header hdr;
union {
- struct {
- uint8_t active; /* still active */
- uint8_t num_items; /* number of items */
- /* Current item being presented */
- uint8_t cur_item;
- } status;
- struct {
- /*
- * Absolute time for this scan, measured from the
- * start of the sequence.
- */
- uint32_t time_us;
- uint8_t scan[0]; /* keyscan data */
- } add;
- struct {
- uint8_t start_item; /* First item to return */
- uint8_t num_items; /* Number of items to return */
- } collect;
+ /* EC_SB_FW_UPDATE_PREPARE = 0x0 */
+ /* EC_SB_FW_UPDATE_INFO = 0x1 */
+ /* EC_SB_FW_UPDATE_BEGIN = 0x2 */
+ /* EC_SB_FW_UPDATE_END = 0x4 */
+ /* EC_SB_FW_UPDATE_STATUS = 0x5 */
+ /* EC_SB_FW_UPDATE_PROTECT = 0x6 */
+ struct __ec_align4 {
+ /* no args */
+ } dummy;
+
+ /* EC_SB_FW_UPDATE_WRITE = 0x3 */
+ struct __ec_align4 {
+ uint8_t data[SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE];
+ } write;
};
-} __packed;
+};
-struct ec_result_keyscan_seq_ctrl {
+struct __ec_align1 ec_response_sb_fw_update {
union {
- struct {
- uint8_t num_items; /* Number of items */
- /* Data for each item */
- struct ec_collect_item item[0];
- } collect;
+ /* EC_SB_FW_UPDATE_INFO = 0x1 */
+ struct __ec_align1 {
+ uint8_t data[SB_FW_UPDATE_CMD_INFO_SIZE];
+ } info;
+
+ /* EC_SB_FW_UPDATE_STATUS = 0x5 */
+ struct __ec_align1 {
+ uint8_t data[SB_FW_UPDATE_CMD_STATUS_SIZE];
+ } status;
};
-} __packed;
+};
+
+/*
+ * Entering Verified Boot Mode Command
+ * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command.
+ * Valid Modes are: normal, developer, and recovery.
+ */
+#define EC_CMD_ENTERING_MODE 0x00B6
+
+struct __ec_align4 ec_params_entering_mode {
+ int vboot_mode;
+};
+
+#define VBOOT_MODE_NORMAL 0
+#define VBOOT_MODE_DEVELOPER 1
+#define VBOOT_MODE_RECOVERY 2
/*****************************************************************************/
-/* Temperature sensor commands */
+/*
+ * I2C passthru protection command: Protects I2C tunnels against access on
+ * certain addresses (board-specific).
+ */
+#define EC_CMD_I2C_PASSTHRU_PROTECT 0x00B7
-/* Read temperature sensor info */
-#define EC_CMD_TEMP_SENSOR_GET_INFO 0x70
+enum ec_i2c_passthru_protect_subcmd {
+ EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0,
+ EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1,
+};
-struct ec_params_temp_sensor_get_info {
- uint8_t id;
-} __packed;
+struct __ec_align1 ec_params_i2c_passthru_protect {
+ uint8_t subcmd;
+ uint8_t port; /* I2C port number */
+};
-struct ec_response_temp_sensor_get_info {
- char sensor_name[32];
- uint8_t sensor_type;
-} __packed;
+struct __ec_align1 ec_response_i2c_passthru_protect {
+ uint8_t status; /* Status flags (0: unlocked, 1: locked) */
+};
/*****************************************************************************/
+/* System commands */
/*
- * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI
- * commands accidentally sent to the wrong interface. See the ACPI section
- * below.
+ * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't
+ * necessarily reboot the EC. Rename to "image" or something similar?
*/
+#define EC_CMD_REBOOT_EC 0x00D2
-/*****************************************************************************/
-/* Host event commands */
+/* Command */
+enum ec_reboot_cmd {
+ EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */
+ EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */
+ EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */
+ /* (command 3 was jump to RW-B) */
+ EC_REBOOT_COLD = 4, /* Cold-reboot */
+ EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */
+ EC_REBOOT_HIBERNATE = 6, /* Hibernate EC */
+ EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_OFF flag */
+};
+
+/* Flags for ec_params_reboot_ec.reboot_flags */
+#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */
+#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */
+#define EC_REBOOT_FLAG_SWITCH_RW_SLOT (1 << 2) /* Switch RW slot */
+
+struct __ec_align1 ec_params_reboot_ec {
+ uint8_t cmd; /* enum ec_reboot_cmd */
+ uint8_t flags; /* See EC_REBOOT_FLAG_* */
+};
/*
- * Host event mask params and response structures, shared by all of the host
- * event commands below.
+ * Get information on last EC panic.
+ *
+ * Returns variable-length platform-dependent panic information. See panic.h
+ * for details.
*/
-struct ec_params_host_event_mask {
- uint32_t mask;
-} __packed;
+#define EC_CMD_GET_PANIC_INFO 0x00D3
-struct ec_response_host_event_mask {
- uint32_t mask;
-} __packed;
+/*****************************************************************************/
+/*
+ * Special commands
+ *
+ * These do not follow the normal rules for commands. See each command for
+ * details.
+ */
-/* These all use ec_response_host_event_mask */
-#define EC_CMD_HOST_EVENT_GET_B 0x87
-#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x88
-#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x89
-#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x8d
+/*
+ * Reboot NOW
+ *
+ * This command will work even when the EC LPC interface is busy, because the
+ * reboot command is processed at interrupt level. Note that when the EC
+ * reboots, the host will reboot too, so there is no response to this command.
+ *
+ * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
+ */
+#define EC_CMD_REBOOT 0x00D1 /* Think "die" */
-/* These all use ec_params_host_event_mask */
-#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x8a
-#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x8b
-#define EC_CMD_HOST_EVENT_CLEAR 0x8c
-#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x8e
-#define EC_CMD_HOST_EVENT_CLEAR_B 0x8f
+/*
+ * Resend last response (not supported on LPC).
+ *
+ * Returns EC_RES_UNAVAILABLE if there is no response available - for example,
+ * there was no previous command, or the previous command's response was too
+ * big to save.
+ */
+#define EC_CMD_RESEND_RESPONSE 0x00DB
+
+/*
+ * This header byte on a command indicate version 0. Any header byte less
+ * than this means that we are talking to an old EC which doesn't support
+ * versioning. In that case, we assume version 0.
+ *
+ * Header bytes greater than this indicate a later version. For example,
+ * EC_CMD_VERSION0 + 1 means we are using version 1.
+ *
+ * The old EC interface must not use commands 0xdc or higher.
+ */
+#define EC_CMD_VERSION0 0x00DC
/*****************************************************************************/
-/* Switch commands */
+/*
+ * PD commands
+ *
+ * These commands are for PD MCU communication.
+ */
-/* Enable/disable LCD backlight */
-#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x90
+/* EC to PD MCU exchange status command */
+#define EC_CMD_PD_EXCHANGE_STATUS 0x0100
+#define EC_VER_PD_EXCHANGE_STATUS 2
-struct ec_params_switch_enable_backlight {
- uint8_t enabled;
-} __packed;
+enum pd_charge_state {
+ PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */
+ PD_CHARGE_NONE, /* No charging allowed */
+ PD_CHARGE_5V, /* 5V charging only */
+ PD_CHARGE_MAX /* Charge@max voltage */
+};
-/* Enable/disable WLAN/Bluetooth */
-#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
+/* Status of EC being sent to PD */
+#define EC_STATUS_HIBERNATING (1 << 0)
+
+struct __ec_align1 ec_params_pd_status {
+ uint8_t status; /* EC status */
+ int8_t batt_soc; /* battery state of charge */
+ uint8_t charge_state; /* charging state (from enum pd_charge_state) */
+};
+
+/* Status of PD being sent back to EC */
+#define PD_STATUS_HOST_EVENT (1 << 0) /* Forward host event to AP */
+#define PD_STATUS_IN_RW (1 << 1) /* Running RW image */
+#define PD_STATUS_JUMPED_TO_IMAGE (1 << 2) /* Current image was jumped to */
+#define PD_STATUS_TCPC_ALERT_0 (1 << 3) /* Alert active in port 0 TCPC */
+#define PD_STATUS_TCPC_ALERT_1 (1 << 4) /* Alert active in port 1 TCPC */
+#define PD_STATUS_TCPC_ALERT_2 (1 << 5) /* Alert active in port 2 TCPC */
+#define PD_STATUS_TCPC_ALERT_3 (1 << 6) /* Alert active in port 3 TCPC */
+#define PD_STATUS_EC_INT_ACTIVE (PD_STATUS_TCPC_ALERT_0 | \
+ PD_STATUS_TCPC_ALERT_1 | \
+ PD_STATUS_HOST_EVENT)
+struct __ec_align_size1 ec_response_pd_status {
+ uint32_t curr_lim_ma; /* input current limit */
+ uint16_t status; /* PD MCU status */
+ int8_t active_charge_port; /* active charging port */
+};
+
+/* AP to PD MCU host event status command, cleared on read */
+#define EC_CMD_PD_HOST_EVENT_STATUS 0x0104
+
+/* PD MCU host event status bits */
+#define PD_EVENT_UPDATE_DEVICE (1 << 0)
+#define PD_EVENT_POWER_CHANGE (1 << 1)
+#define PD_EVENT_IDENTITY_RECEIVED (1 << 2)
+#define PD_EVENT_DATA_SWAP (1 << 3)
+struct __ec_align4 ec_response_host_event_status {
+ uint32_t status; /* PD MCU host event status */
+};
+
+/* Set USB type-C port role and muxes */
+#define EC_CMD_USB_PD_CONTROL 0x0101
+
+enum usb_pd_control_role {
+ USB_PD_CTRL_ROLE_NO_CHANGE = 0,
+ USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */
+ USB_PD_CTRL_ROLE_TOGGLE_OFF = 2,
+ USB_PD_CTRL_ROLE_FORCE_SINK = 3,
+ USB_PD_CTRL_ROLE_FORCE_SOURCE = 4,
+ USB_PD_CTRL_ROLE_COUNT
+};
+
+enum usb_pd_control_mux {
+ USB_PD_CTRL_MUX_NO_CHANGE = 0,
+ USB_PD_CTRL_MUX_NONE = 1,
+ USB_PD_CTRL_MUX_USB = 2,
+ USB_PD_CTRL_MUX_DP = 3,
+ USB_PD_CTRL_MUX_DOCK = 4,
+ USB_PD_CTRL_MUX_AUTO = 5,
+ USB_PD_CTRL_MUX_COUNT
+};
+
+enum usb_pd_control_swap {
+ USB_PD_CTRL_SWAP_NONE = 0,
+ USB_PD_CTRL_SWAP_DATA = 1,
+ USB_PD_CTRL_SWAP_POWER = 2,
+ USB_PD_CTRL_SWAP_VCONN = 3,
+ USB_PD_CTRL_SWAP_COUNT
+};
+
+struct __ec_align1 ec_params_usb_pd_control {
+ uint8_t port;
+ uint8_t role;
+ uint8_t mux;
+ uint8_t swap;
+};
-struct ec_params_switch_enable_wireless {
+#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
+#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
+#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
+
+#define PD_CTRL_RESP_ROLE_POWER (1 << 0) /* 0=SNK/1=SRC */
+#define PD_CTRL_RESP_ROLE_DATA (1 << 1) /* 0=UFP/1=DFP */
+#define PD_CTRL_RESP_ROLE_VCONN (1 << 2) /* Vconn status */
+#define PD_CTRL_RESP_ROLE_DR_POWER (1 << 3) /* Partner is dualrole power */
+#define PD_CTRL_RESP_ROLE_DR_DATA (1 << 4) /* Partner is dualrole data */
+#define PD_CTRL_RESP_ROLE_USB_COMM (1 << 5) /* Partner USB comm capable */
+#define PD_CTRL_RESP_ROLE_EXT_POWERED (1 << 6) /* Partner externally powerd */
+
+struct __ec_align1 ec_response_usb_pd_control {
uint8_t enabled;
-} __packed;
+ uint8_t role;
+ uint8_t polarity;
+ uint8_t state;
+};
-/*****************************************************************************/
-/* GPIO commands. Only available on EC if write protect has been disabled. */
+struct __ec_align1 ec_response_usb_pd_control_v1 {
+ uint8_t enabled;
+ uint8_t role;
+ uint8_t polarity;
+ char state[32];
+};
-/* Set GPIO output value */
-#define EC_CMD_GPIO_SET 0x92
+#define EC_CMD_USB_PD_PORTS 0x0102
-struct ec_params_gpio_set {
- char name[32];
- uint8_t val;
-} __packed;
+/* Maximum number of PD ports on a device, num_ports will be <= this */
+#define EC_USB_PD_MAX_PORTS 8
-/* Get GPIO value */
-#define EC_CMD_GPIO_GET 0x93
+struct __ec_align1 ec_response_usb_pd_ports {
+ uint8_t num_ports;
+};
-struct ec_params_gpio_get {
- char name[32];
-} __packed;
-struct ec_response_gpio_get {
- uint8_t val;
-} __packed;
+#define EC_CMD_USB_PD_POWER_INFO 0x0103
+
+#define PD_POWER_CHARGING_PORT 0xff
+struct __ec_align1 ec_params_usb_pd_power_info {
+ uint8_t port;
+};
+
+enum usb_chg_type {
+ USB_CHG_TYPE_NONE,
+ USB_CHG_TYPE_PD,
+ USB_CHG_TYPE_C,
+ USB_CHG_TYPE_PROPRIETARY,
+ USB_CHG_TYPE_BC12_DCP,
+ USB_CHG_TYPE_BC12_CDP,
+ USB_CHG_TYPE_BC12_SDP,
+ USB_CHG_TYPE_OTHER,
+ USB_CHG_TYPE_VBUS,
+ USB_CHG_TYPE_UNKNOWN,
+};
+enum usb_power_roles {
+ USB_PD_PORT_POWER_DISCONNECTED,
+ USB_PD_PORT_POWER_SOURCE,
+ USB_PD_PORT_POWER_SINK,
+ USB_PD_PORT_POWER_SINK_NOT_CHARGING,
+};
+
+struct __ec_align2 usb_chg_measures {
+ uint16_t voltage_max;
+ uint16_t voltage_now;
+ uint16_t current_max;
+ uint16_t current_lim;
+};
+
+struct __ec_align4 ec_response_usb_pd_power_info {
+ uint8_t role;
+ uint8_t type;
+ uint8_t dualrole;
+ uint8_t reserved1;
+ struct usb_chg_measures meas;
+ uint32_t max_power;
+};
+
+/* Write USB-PD device FW */
+#define EC_CMD_USB_PD_FW_UPDATE 0x0110
+
+enum usb_pd_fw_update_cmds {
+ USB_PD_FW_REBOOT,
+ USB_PD_FW_FLASH_ERASE,
+ USB_PD_FW_FLASH_WRITE,
+ USB_PD_FW_ERASE_SIG,
+};
+
+struct __ec_align4 ec_params_usb_pd_fw_update {
+ uint16_t dev_id;
+ uint8_t cmd;
+ uint8_t port;
+ uint32_t size; /* Size to write in bytes */
+ /* Followed by data to write */
+};
-/*****************************************************************************/
-/* I2C commands. Only available when flash write protect is unlocked. */
+/* Write USB-PD Accessory RW_HASH table entry */
+#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x0111
+/* RW hash is first 20 bytes of SHA-256 of RW section */
+#define PD_RW_HASH_SIZE 20
+struct __ec_align1 ec_params_usb_pd_rw_hash_entry {
+ uint16_t dev_id;
+ uint8_t dev_rw_hash[PD_RW_HASH_SIZE];
+ uint8_t reserved; /* For alignment of current_image
+ * TODO(rspangler) but it's not aligned!
+ * Should have been reserved[2]. */
+ uint32_t current_image; /* One of ec_current_image */
+};
-/* Read I2C bus */
-#define EC_CMD_I2C_READ 0x94
+/* Read USB-PD Accessory info */
+#define EC_CMD_USB_PD_DEV_INFO 0x0112
-struct ec_params_i2c_read {
- uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
- uint8_t read_size; /* Either 8 or 16. */
+struct __ec_align1 ec_params_usb_pd_info_request {
uint8_t port;
- uint8_t offset;
-} __packed;
-struct ec_response_i2c_read {
- uint16_t data;
-} __packed;
+};
-/* Write I2C bus */
-#define EC_CMD_I2C_WRITE 0x95
+/* Read USB-PD Device discovery info */
+#define EC_CMD_USB_PD_DISCOVERY 0x0113
+struct __ec_align_size1 ec_params_usb_pd_discovery_entry {
+ uint16_t vid; /* USB-IF VID */
+ uint16_t pid; /* USB-IF PID */
+ uint8_t ptype; /* product type (hub,periph,cable,ama) */
+};
-struct ec_params_i2c_write {
- uint16_t data;
- uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
- uint8_t write_size; /* Either 8 or 16. */
- uint8_t port;
- uint8_t offset;
-} __packed;
+/* Override default charge behavior */
+#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114
-/*****************************************************************************/
-/* Charge state commands. Only available when flash write protect unlocked. */
+/* Negative port parameters have special meaning */
+enum usb_pd_override_ports {
+ OVERRIDE_DONT_CHARGE = -2,
+ OVERRIDE_OFF = -1,
+ /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */
+};
-/* Force charge state machine to stop in idle mode */
-#define EC_CMD_CHARGE_FORCE_IDLE 0x96
+struct __ec_align2 ec_params_charge_port_override {
+ int16_t override_port; /* Override port# */
+};
-struct ec_params_force_idle {
- uint8_t enabled;
-} __packed;
+/* Read (and delete) one entry of PD event log */
+#define EC_CMD_PD_GET_LOG_ENTRY 0x0115
-/*****************************************************************************/
-/* Console commands. Only available when flash write protect is unlocked. */
+struct __ec_align4 ec_response_pd_log {
+ uint32_t timestamp; /* relative timestamp in milliseconds */
+ uint8_t type; /* event type : see PD_EVENT_xx below */
+ uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */
+ uint16_t data; /* type-defined data payload */
+ uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
+};
-/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */
-#define EC_CMD_CONSOLE_SNAPSHOT 0x97
+
+/* The timestamp is the microsecond counter shifted to get about a ms. */
+#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */
+
+#define PD_LOG_SIZE_MASK 0x1f
+#define PD_LOG_PORT_MASK 0xe0
+#define PD_LOG_PORT_SHIFT 5
+#define PD_LOG_PORT_SIZE(port, size) (((port) << PD_LOG_PORT_SHIFT) | \
+ ((size) & PD_LOG_SIZE_MASK))
+#define PD_LOG_PORT(size_port) ((size_port) >> PD_LOG_PORT_SHIFT)
+#define PD_LOG_SIZE(size_port) ((size_port) & PD_LOG_SIZE_MASK)
+
+/* PD event log : entry types */
+/* PD MCU events */
+#define PD_EVENT_MCU_BASE 0x00
+#define PD_EVENT_MCU_CHARGE (PD_EVENT_MCU_BASE+0)
+#define PD_EVENT_MCU_CONNECT (PD_EVENT_MCU_BASE+1)
+/* Reserved for custom board event */
+#define PD_EVENT_MCU_BOARD_CUSTOM (PD_EVENT_MCU_BASE+2)
+/* PD generic accessory events */
+#define PD_EVENT_ACC_BASE 0x20
+#define PD_EVENT_ACC_RW_FAIL (PD_EVENT_ACC_BASE+0)
+#define PD_EVENT_ACC_RW_ERASE (PD_EVENT_ACC_BASE+1)
+/* PD power supply events */
+#define PD_EVENT_PS_BASE 0x40
+#define PD_EVENT_PS_FAULT (PD_EVENT_PS_BASE+0)
+/* PD video dongles events */
+#define PD_EVENT_VIDEO_BASE 0x60
+#define PD_EVENT_VIDEO_DP_MODE (PD_EVENT_VIDEO_BASE+0)
+#define PD_EVENT_VIDEO_CODEC (PD_EVENT_VIDEO_BASE+1)
+/* Returned in the "type" field, when there is no entry available */
+#define PD_EVENT_NO_ENTRY 0xff
/*
- * Read next chunk of data from saved snapshot.
- *
- * Response is null-terminated string. Empty string, if there is no more
- * remaining output.
+ * PD_EVENT_MCU_CHARGE event definition :
+ * the payload is "struct usb_chg_measures"
+ * the data field contains the port state flags as defined below :
*/
-#define EC_CMD_CONSOLE_READ 0x98
-
-/*****************************************************************************/
+/* Port partner is a dual role device */
+#define CHARGE_FLAGS_DUAL_ROLE (1 << 15)
+/* Port is the pending override port */
+#define CHARGE_FLAGS_DELAYED_OVERRIDE (1 << 14)
+/* Port is the override port */
+#define CHARGE_FLAGS_OVERRIDE (1 << 13)
+/* Charger type */
+#define CHARGE_FLAGS_TYPE_SHIFT 3
+#define CHARGE_FLAGS_TYPE_MASK (0xf << CHARGE_FLAGS_TYPE_SHIFT)
+/* Power delivery role */
+#define CHARGE_FLAGS_ROLE_MASK (7 << 0)
/*
- * Cut off battery power output if the battery supports.
- *
- * For unsupported battery, just don't implement this command and lets EC
- * return EC_RES_INVALID_COMMAND.
+ * PD_EVENT_PS_FAULT data field flags definition :
*/
-#define EC_CMD_BATTERY_CUT_OFF 0x99
-
-/*****************************************************************************/
-/* USB port mux control. */
+#define PS_FAULT_OCP 1
+#define PS_FAULT_FAST_OCP 2
+#define PS_FAULT_OVP 3
+#define PS_FAULT_DISCH 4
/*
- * Switch USB mux or return to automatic switching.
+ * PD_EVENT_VIDEO_CODEC payload is "struct mcdp_info".
*/
-#define EC_CMD_USB_MUX 0x9a
+struct __ec_align4 mcdp_version {
+ uint8_t major;
+ uint8_t minor;
+ uint16_t build;
+};
-struct ec_params_usb_mux {
- uint8_t mux;
-} __packed;
+struct __ec_align4 mcdp_info {
+ uint8_t family[2];
+ uint8_t chipid[2];
+ struct mcdp_version irom;
+ struct mcdp_version fw;
+};
-/*****************************************************************************/
-/* LDOs / FETs control. */
+/* struct mcdp_info field decoding */
+#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
+#define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
-enum ec_ldo_state {
- EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */
- EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */
+/* Get/Set USB-PD Alternate mode info */
+#define EC_CMD_USB_PD_GET_AMODE 0x0116
+struct __ec_align_size1 ec_params_usb_pd_get_mode_request {
+ uint16_t svid_idx; /* SVID index to get */
+ uint8_t port; /* port */
};
-/*
- * Switch on/off a LDO.
- */
-#define EC_CMD_LDO_SET 0x9b
+struct __ec_align4 ec_params_usb_pd_get_mode_response {
+ uint16_t svid; /* SVID */
+ uint16_t opos; /* Object Position */
+ uint32_t vdo[6]; /* Mode VDOs */
+};
-struct ec_params_ldo_set {
- uint8_t index;
- uint8_t state;
-} __packed;
+#define EC_CMD_USB_PD_SET_AMODE 0x0117
-/*
- * Get LDO state.
- */
-#define EC_CMD_LDO_GET 0x9c
+enum pd_mode_cmd {
+ PD_EXIT_MODE = 0,
+ PD_ENTER_MODE = 1,
+ /* Not a command. Do NOT remove. */
+ PD_MODE_CMD_COUNT,
+};
-struct ec_params_ldo_get {
- uint8_t index;
-} __packed;
+struct __ec_align4 ec_params_usb_pd_set_mode_request {
+ uint32_t cmd; /* enum pd_mode_cmd */
+ uint16_t svid; /* SVID to set */
+ uint8_t opos; /* Object Position */
+ uint8_t port; /* port */
+};
-struct ec_response_ldo_get {
- uint8_t state;
-} __packed;
+/* Ask the PD MCU to record a log of a requested type */
+#define EC_CMD_PD_WRITE_LOG_ENTRY 0x0118
-/*****************************************************************************/
-/* Power info. */
+struct __ec_align1 ec_params_pd_write_log_entry {
+ uint8_t type; /* event type : see PD_EVENT_xx above */
+ uint8_t port; /* port#, or 0 for events unrelated to a given port */
+};
-/*
- * Get power info.
- */
-#define EC_CMD_POWER_INFO 0x9d
-struct ec_response_power_info {
- uint32_t usb_dev_type;
- uint16_t voltage_ac;
- uint16_t voltage_system;
- uint16_t current_system;
- uint16_t usb_current_limit;
-} __packed;
+/* Control USB-PD chip */
+#define EC_CMD_PD_CONTROL 0x0119
-/*****************************************************************************/
-/* I2C passthru command */
+enum ec_pd_control_cmd {
+ PD_SUSPEND = 0, /* Suspend the PD chip (EC: stop talking to PD) */
+ PD_RESUME, /* Resume the PD chip (EC: start talking to PD) */
+ PD_RESET, /* Force reset the PD chip */
+ PD_CONTROL_DISABLE /* Disable further calls to this command */
+};
-#define EC_CMD_I2C_PASSTHRU 0x9e
+struct __ec_align1 ec_params_pd_control {
+ uint8_t chip; /* chip id (should be 0) */
+ uint8_t subcmd;
+};
-/* Slave address is 10 (not 7) bit */
-#define EC_I2C_FLAG_10BIT (1 << 16)
+/* Get info about USB-C SS muxes */
+#define EC_CMD_USB_PD_MUX_INFO 0x011A
-/* Read data; if not present, message is a write */
-#define EC_I2C_FLAG_READ (1 << 15)
+struct __ec_align1 ec_params_usb_pd_mux_info {
+ uint8_t port; /* USB-C port number */
+};
-/* Mask for address */
-#define EC_I2C_ADDR_MASK 0x3ff
+/* Flags representing mux state */
+#define USB_PD_MUX_USB_ENABLED (1 << 0)
+#define USB_PD_MUX_DP_ENABLED (1 << 1)
+#define USB_PD_MUX_POLARITY_INVERTED (1 << 2)
+#define USB_PD_MUX_HPD_IRQ (1 << 3)
-#define EC_I2C_STATUS_NAK (1 << 0) /* Transfer was not acknowledged */
-#define EC_I2C_STATUS_TIMEOUT (1 << 1) /* Timeout during transfer */
+struct __ec_align1 ec_response_usb_pd_mux_info {
+ uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
+};
-/* Any error */
-#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
+#define EC_CMD_PD_CHIP_INFO 0x011B
-struct ec_params_i2c_passthru_msg {
- uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */
- uint16_t len; /* Number of bytes to read or write */
-} __packed;
+struct __ec_align1 ec_params_pd_chip_info {
+ uint8_t port; /* USB-C port number */
+ uint8_t renew; /* Force renewal */
+};
-struct ec_params_i2c_passthru {
- uint8_t port; /* I2C port number */
- uint8_t num_msgs; /* Number of messages */
- struct ec_params_i2c_passthru_msg msg[];
- /* Data to write for all messages is concatenated here */
-} __packed;
+struct __ec_align2 ec_response_pd_chip_info {
+ uint16_t vendor_id;
+ uint16_t product_id;
+ uint16_t device_id;
+ union {
+ uint8_t fw_version_string[8];
+ uint64_t fw_version_number;
+ };
+};
-struct ec_response_i2c_passthru {
- uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */
- uint8_t num_msgs; /* Number of messages processed */
- uint8_t data[]; /* Data read by messages concatenated here */
-} __packed;
+/* Run RW signature verification and get status */
+#define EC_CMD_RWSIG_CHECK_STATUS 0x011C
+
+struct __ec_align4 ec_response_rwsig_check_status {
+ uint32_t status;
+};
+/* For controlling RWSIG task */
+#define EC_CMD_RWSIG_ACTION 0x011D
-/*****************************************************************************/
-/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */
+enum rwsig_action {
+ RWSIG_ACTION_ABORT = 0, /* Abort RWSIG and prevent jumping */
+ RWSIG_ACTION_CONTINUE = 1, /* Jump to RW immediately */
+};
+
+struct __ec_align4 ec_params_rwsig_action {
+ uint32_t action;
+};
+
+/* Run verification on a slot */
+#define EC_CMD_EFS_VERIFY 0x011E
+
+struct __ec_align1 ec_params_efs_verify {
+ uint8_t region; /* enum ec_flash_region */
+};
/*
- * Dump charge state machine context.
- *
- * Response is a binary dump of charge state machine context.
+ * Retrieve info from Cros Board Info store. Response is based on the data
+ * type. Integers return a uint32. Strings return a string, using the response
+ * size to determine how big it is.
+ */
+#define EC_CMD_GET_CROS_BOARD_INFO 0x011F
+/*
+ * Write info into Cros Board Info on EEPROM. Write fails if the board has
+ * hardware write-protect enabled.
*/
-#define EC_CMD_CHARGE_DUMP 0xa0
+#define EC_CMD_SET_CROS_BOARD_INFO 0x0120
+
+enum cbi_data_tag {
+ CBI_TAG_BOARD_VERSION = 0, /* uint16_t or uint8_t[] = {minor,major} */
+ CBI_TAG_OEM_ID = 1, /* uint8_t */
+ CBI_TAG_SKU_ID = 2, /* uint8_t */
+ CBI_TAG_COUNT,
+};
/*
- * Set maximum battery charging current.
+ * Flags to control read operation
+ *
+ * RELOAD: Invalidate cache and read data from EEPROM. Useful to verify
+ * write was successful without reboot.
*/
-#define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
+#define CBI_GET_RELOAD (1 << 0)
-struct ec_params_current_limit {
- uint32_t limit; /* in mA */
-} __packed;
+struct __ec_align4 ec_params_get_cbi {
+ uint32_t type; /* enum cbi_data_tag */
+ uint32_t flag; /* CBI_GET_* */
+};
/*
- * Set maximum external power current.
+ * Flags to control write behavior.
+ *
+ * NO_SYNC: Makes EC update data in RAM but skip writing to EEPROM. It's
+ * useful when writing multiple fields in a row.
+ * INIT: Needs to be set when creating a new CBI from scratch. All fields
+ * will be initialized to zero first.
*/
-#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2
+#define CBI_SET_NO_SYNC (1 << 0)
+#define CBI_SET_INIT (1 << 1)
+
+struct __ec_align1 ec_params_set_cbi {
+ uint32_t tag; /* enum cbi_data_tag */
+ uint32_t flag; /* CBI_SET_* */
+ uint32_t size; /* Data size */
+ uint8_t data[]; /* For string and raw data */
+};
-struct ec_params_ext_power_current_limit {
- uint32_t limit; /* in mA */
-} __packed;
+/*****************************************************************************/
+/* The command range 0x200-0x2FF is reserved for Rotor. */
/*****************************************************************************/
-/* Smart battery pass-through */
+/*
+ * Reserve a range of host commands for the CR51 firmware.
+ */
+#define EC_CMD_CR51_BASE 0x0300
+#define EC_CMD_CR51_LAST 0x03FF
-/* Get / Set 16-bit smart battery registers */
-#define EC_CMD_SB_READ_WORD 0xb0
-#define EC_CMD_SB_WRITE_WORD 0xb1
+/*****************************************************************************/
+/* Fingerprint MCU commands: range 0x0400-0x040x */
-/* Get / Set string smart battery parameters
- * formatted as SMBUS "block".
- */
-#define EC_CMD_SB_READ_BLOCK 0xb2
-#define EC_CMD_SB_WRITE_BLOCK 0xb3
+/* Fingerprint SPI sensor passthru command: prototyping ONLY */
+#define EC_CMD_FP_PASSTHRU 0x0400
-struct ec_params_sb_rd {
- uint8_t reg;
-} __packed;
+#define EC_FP_FLAG_NOT_COMPLETE 0x1
-struct ec_response_sb_rd_word {
- uint16_t value;
-} __packed;
+struct __ec_align2 ec_params_fp_passthru {
+ uint16_t len; /* Number of bytes to write then read */
+ uint16_t flags; /* EC_FP_FLAG_xxx */
+ uint8_t data[]; /* Data to send */
+};
-struct ec_params_sb_wr_word {
- uint8_t reg;
- uint16_t value;
-} __packed;
+/* Fingerprint sensor configuration command: prototyping ONLY */
+#define EC_CMD_FP_SENSOR_CONFIG 0x0401
-struct ec_response_sb_rd_block {
- uint8_t data[32];
-} __packed;
+#define EC_FP_SENSOR_CONFIG_MAX_REGS 16
-struct ec_params_sb_wr_block {
- uint8_t reg;
- uint16_t data[32];
-} __packed;
+struct __ec_align2 ec_params_fp_sensor_config {
+ uint8_t count; /* Number of setup registers */
+ /*
+ * the value to send to each of the 'count' setup registers
+ * is stored in the 'data' array for 'len' bytes just after
+ * the previous one.
+ */
+ uint8_t len[EC_FP_SENSOR_CONFIG_MAX_REGS];
+ uint8_t data[];
+};
-/*
- * Entering Verified Boot Mode Command
- * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command.
- * Valid Modes are: normal, developer, and recovery.
- */
-#define EC_CMD_ENTERING_MODE 0xb6
+/* Configure the Fingerprint MCU behavior */
+#define EC_CMD_FP_MODE 0x0402
+
+/* Put the sensor in its lowest power mode */
+#define FP_MODE_DEEPSLEEP (1<<0)
+/* Wait to see a finger on the sensor */
+#define FP_MODE_FINGER_DOWN (1<<1)
+/* Poll until the finger has left the sensor */
+#define FP_MODE_FINGER_UP (1<<2)
+/* Capture the current finger image */
+#define FP_MODE_CAPTURE (1<<3)
+/* special value: don't change anything just read back current mode */
+#define FP_MODE_DONT_CHANGE (1<<31)
+
+struct __ec_align4 ec_params_fp_mode {
+ uint32_t mode; /* as defined by FP_MODE_ constants */
+ /* TBD */
+};
-struct ec_params_entering_mode {
- int vboot_mode;
-} __packed;
+struct __ec_align4 ec_response_fp_mode {
+ uint32_t mode; /* as defined by FP_MODE_ constants */
+ /* TBD */
+};
-#define VBOOT_MODE_NORMAL 0
-#define VBOOT_MODE_DEVELOPER 1
-#define VBOOT_MODE_RECOVERY 2
+/* Retrieve Fingerprint sensor information */
+#define EC_CMD_FP_INFO 0x0403
+
+struct __ec_align2 ec_response_fp_info {
+ /* Sensor identification */
+ uint32_t vendor_id;
+ uint32_t product_id;
+ uint32_t model_id;
+ uint32_t version;
+ /* Image frame characteristics */
+ uint32_t frame_size;
+ uint32_t pixel_format; /* using V4L2_PIX_FMT_ */
+ uint16_t width;
+ uint16_t height;
+ uint16_t bpp;
+};
+
+/* Get the last captured finger frame: TODO: will be AES-encrypted */
+#define EC_CMD_FP_FRAME 0x0404
+
+struct __ec_align4 ec_params_fp_frame {
+ uint32_t offset;
+ uint32_t size;
+};
/*****************************************************************************/
-/* System commands */
+/* Touchpad MCU commands: range 0x0500-0x05FF */
-/*
- * TODO: this is a confusing name, since it doesn't necessarily reboot the EC.
- * Rename to "set image" or something similar.
- */
-#define EC_CMD_REBOOT_EC 0xd2
+/* Perform touchpad self test */
+#define EC_CMD_TP_SELF_TEST 0x0500
-/* Command */
-enum ec_reboot_cmd {
- EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */
- EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */
- EC_REBOOT_JUMP_RW = 2, /* Jump to RW without rebooting */
- /* (command 3 was jump to RW-B) */
- EC_REBOOT_COLD = 4, /* Cold-reboot */
- EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */
- EC_REBOOT_HIBERNATE = 6 /* Hibernate EC */
+/* Get number of frame types, and the size of each type */
+#define EC_CMD_TP_FRAME_INFO 0x0501
+
+struct __ec_align4 ec_response_tp_frame_info {
+ uint32_t n_frames;
+ uint32_t frame_sizes[0];
};
-/* Flags for ec_params_reboot_ec.reboot_flags */
-#define EC_REBOOT_FLAG_RESERVED0 (1 << 0) /* Was recovery request */
-#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN (1 << 1) /* Reboot after AP shutdown */
+/* Create a snapshot of current frame readings */
+#define EC_CMD_TP_FRAME_SNAPSHOT 0x0502
-struct ec_params_reboot_ec {
- uint8_t cmd; /* enum ec_reboot_cmd */
- uint8_t flags; /* See EC_REBOOT_FLAG_* */
-} __packed;
+/* Read the frame */
+#define EC_CMD_TP_FRAME_GET 0x0503
-/*
- * Get information on last EC panic.
- *
- * Returns variable-length platform-dependent panic information. See panic.h
- * for details.
- */
-#define EC_CMD_GET_PANIC_INFO 0xd3
+struct __ec_align4 ec_params_tp_frame_get {
+ uint32_t frame_index;
+ uint32_t offset;
+ uint32_t size;
+};
/*****************************************************************************/
/*
- * ACPI commands
- *
- * These are valid ONLY on the ACPI command/data port.
- */
-
-/*
- * ACPI Read Embedded Controller
+ * Reserve a range of host commands for board-specific, experimental, or
+ * special purpose features. These can be (re)used without updating this file.
*
- * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ * CAUTION: Don't go nuts with this. Shipping products should document ALL
+ * their EC commands for easier development, testing, debugging, and support.
*
- * Use the following sequence:
+ * All commands MUST be #defined to be 4-digit UPPER CASE hex values
+ * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work.
*
- * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD
- * - Wait for EC_LPC_CMDR_PENDING bit to clear
- * - Write address to EC_LPC_ADDR_ACPI_DATA
- * - Wait for EC_LPC_CMDR_DATA bit to set
- * - Read value from EC_LPC_ADDR_ACPI_DATA
- */
-#define EC_CMD_ACPI_READ 0x80
-
-/*
- * ACPI Write Embedded Controller
+ * In your experimental code, you may want to do something like this:
*
- * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*).
+ * #define EC_CMD_MAGIC_FOO 0x0000
+ * #define EC_CMD_MAGIC_BAR 0x0001
+ * #define EC_CMD_MAGIC_HEY 0x0002
*
- * Use the following sequence:
+ * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler,
+ * EC_VER_MASK(0);
*
- * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD
- * - Wait for EC_LPC_CMDR_PENDING bit to clear
- * - Write address to EC_LPC_ADDR_ACPI_DATA
- * - Wait for EC_LPC_CMDR_PENDING bit to clear
- * - Write value to EC_LPC_ADDR_ACPI_DATA
- */
-#define EC_CMD_ACPI_WRITE 0x81
-
-/*
- * ACPI Query Embedded Controller
+ * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler,
+ * EC_VER_MASK(0);
*
- * This clears the lowest-order bit in the currently pending host events, and
- * sets the result code to the 1-based index of the bit (event 0x00000001 = 1,
- * event 0x80000000 = 32), or 0 if no event was pending.
+ * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler,
+ * EC_VER_MASK(0);
*/
-#define EC_CMD_ACPI_QUERY_EVENT 0x84
+#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00
+#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF
-/* Valid addresses in ACPI memory space, for read/write commands */
-/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
-#define EC_ACPI_MEM_VERSION 0x00
/*
- * Test location; writing value here updates test compliment byte to (0xff -
- * value).
+ * Given the private host command offset, calculate the true private host
+ * command value.
*/
-#define EC_ACPI_MEM_TEST 0x01
-/* Test compliment; writes here are ignored. */
-#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02
-/* Keyboard backlight brightness percent (0 - 100) */
-#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
-
-/* Current version of ACPI memory address space */
-#define EC_ACPI_MEM_VERSION_CURRENT 1
-
+#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \
+ (EC_CMD_BOARD_SPECIFIC_BASE + (command))
/*****************************************************************************/
/*
- * Special commands
+ * Passthru commands
*
- * These do not follow the normal rules for commands. See each command for
- * details.
- */
-
-/*
- * Reboot NOW
+ * Some platforms have sub-processors chained to each other. For example.
*
- * This command will work even when the EC LPC interface is busy, because the
- * reboot command is processed@interrupt level. Note that when the EC
- * reboots, the host will reboot too, so there is no response to this command.
+ * AP <--> EC <--> PD MCU
*
- * Use EC_CMD_REBOOT_EC to reboot the EC more politely.
- */
-#define EC_CMD_REBOOT 0xd1 /* Think "die" */
-
-/*
- * Resend last response (not supported on LPC).
+ * The top 2 bits of the command number are used to indicate which device the
+ * command is intended for. Device 0 is always the device receiving the
+ * command; other device mapping is board-specific.
*
- * Returns EC_RES_UNAVAILABLE if there is no response available - for example,
- * there was no previous command, or the previous command's response was too
- * big to save.
+ * When a device receives a command to be passed to a sub-processor, it passes
+ * it on with the device number set back to 0. This allows the sub-processor
+ * to remain blissfully unaware of whether the command originated on the next
+ * device up the chain, or was passed through from the AP.
+ *
+ * In the above example, if the AP wants to send command 0x0002 to the PD MCU,
+ * AP sends command 0x4002 to the EC
+ * EC sends command 0x0002 to the PD MCU
+ * EC forwards PD MCU response back to the AP
*/
-#define EC_CMD_RESEND_RESPONSE 0xdb
+/* Offset and max command number for sub-device n */
+#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n))
+#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff)
+
+/*****************************************************************************/
/*
- * This header byte on a command indicate version 0. Any header byte less
- * than this means that we are talking to an old EC which doesn't support
- * versioning. In that case, we assume version 0.
- *
- * Header bytes greater than this indicate a later version. For example,
- * EC_CMD_VERSION0 + 1 means we are using version 1.
- *
- * The old EC interface must not use commands 0dc or higher.
+ * Deprecated constants. These constants have been renamed for clarity. The
+ * meaning and size has not changed. Programs that use the old names should
+ * switch to the new names soon, as the old names may not be carried forward
+ * forever.
*/
-#define EC_CMD_VERSION0 0xdc
+#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE
+#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1
+#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE
-#endif /* !__ACPI__ */
+#endif /* !__ACPI__ && !__KERNEL__ */
#endif /* __CROS_EC_COMMANDS_H */
--
2.19.0.605.g01d371f741-goog
next prev parent reply other threads:[~2018-10-01 18:22 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-01 18:22 [U-Boot] [PATCH 00/45] Various fixes and improvements Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 01/45] dm: core: Alloc uclass-private data to be cache-aligned Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 02/45] dm: core: Update some functions to use const Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 03/45] dm: core: Add a function to find the first inactive child Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 04/45] dm: core: Update ofnode to read binman-style flash entry Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 05/45] sf: Avoid allocating memory on every read operation Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 06/45] spl: input: Allow input in SPL and TPL Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 07/45] Makefile: Add a warning if SPL/TPL cannot be built Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 08/45] spl: misc: Allow misc drivers in SPL and TPL Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 09/45] blk: Support block drivers in TPL Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 10/45] Kconfig: Convert CONFIG_RTC_MC146818 to Kconfig Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 11/45] rtc: Allow use of RTC in SPL and TPL Simon Glass
2018-10-11 19:21 ` [U-Boot] [U-Boot,11/45] " Heinrich Schuchardt
2018-10-11 19:56 ` Heinrich Schuchardt
2018-10-13 2:46 ` Bin Meng
2018-10-19 3:25 ` Simon Glass
2018-10-19 4:20 ` Bin Meng
2018-10-01 18:22 ` [U-Boot] [PATCH 12/45] fdt: Document the fact that dtc is now built Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 13/45] doc: Update docs for device tree in SPL, TPL Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 14/45] fdt: Allow indicating a node is for U-Boot proper only Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 15/45] tpm: Add support for SPL and TPL Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 16/45] serial: Allow serial to be absent in TPL Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 17/45] fdt: Allow libfdt " Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 18/45] cros: Update cros_ec code to use struct udevice Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 19/45] cros: Adjust board_get_cros_ec_dev() to return a udevice Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 20/45] dm: spi: Add logging of some return values Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 21/45] fdt: Remove fdtdec_decode_region() function Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 22/45] video: Adjust video_clear() to return an error Simon Glass
2018-10-01 19:23 ` Anatolij Gustschin
2018-10-09 23:55 ` sjg at google.com
2018-10-01 18:22 ` [U-Boot] [PATCH 23/45] tpm: Use livetree and allow children Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 24/45] tpm: Tidy up logging in tpm-common.c Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 25/45] tpm: Add a few new commands for v1 Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 26/45] binman: Move to three-digit test-file numbers Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 27/45] binman: Add a test for Intel reference code Simon Glass
2018-10-22 20:54 ` [U-Boot] [U-Boot, " Tom Rini
2018-10-01 18:22 ` [U-Boot] [PATCH 28/45] log: Add comments to the rest of the log categories Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 29/45] malloc_simple: Add logging of allocations Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 30/45] Add a header file for strings Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 31/45] Rename GPT_HEADER_SIGNATURE to avoid conflict Simon Glass
2018-10-01 18:22 ` Simon Glass [this message]
2018-10-01 18:22 ` [U-Boot] [PATCH 33/45] x86: Update mtrr functions to allow leaving cache alone Simon Glass
2018-10-02 13:41 ` Bin Meng
2018-10-09 23:54 ` sjg at google.com
2018-10-01 18:22 ` [U-Boot] [PATCH 34/45] cros_ec: Update cros_ec_read_hash() to specify the image Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 35/45] cros_ec: Add support for v3 messages on LPC Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 36/45] test: panel: Add a test for the panel uclass Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 37/45] panel: Expand the backlight support Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 38/45] ctags: Minor changes to fix ctags output Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 39/45] fdt: Allow C++ comments in link scripts and DT files Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 40/45] pci: Add a little more debugging to pci_rom Simon Glass
2018-10-02 13:37 ` Bin Meng
2018-10-09 23:54 ` sjg at google.com
2018-10-01 18:22 ` [U-Boot] [PATCH 41/45] sysreset: Tidy up a few comments and logging Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 42/45] sysreset: Add a way to find the last reset Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 43/45] video: at91: Adjust vidconsole_position_cursor() to use char pos Simon Glass
2018-10-01 20:22 ` Anatolij Gustschin
2018-10-02 7:37 ` Eugen Hristev
2018-10-09 3:40 ` Simon Glass
2018-10-09 10:44 ` Eugen.Hristev at microchip.com
2018-10-09 23:54 ` sjg at google.com
2018-10-09 3:41 ` Simon Glass
2018-10-01 18:22 ` [U-Boot] [PATCH 44/45] video: Tidy up a few comments in video.o Simon Glass
2018-10-01 19:25 ` Anatolij Gustschin
2018-10-09 23:54 ` sjg at google.com
2018-10-01 18:22 ` [U-Boot] [PATCH 45/45] dtoc: Fix the value of SetInt() Simon Glass
2018-10-09 23:54 ` sjg at google.com
2018-10-09 23:54 ` [U-Boot] [PATCH 42/45] sysreset: Add a way to find the last reset sjg at google.com
2018-10-09 23:54 ` [U-Boot] [PATCH 41/45] sysreset: Tidy up a few comments and logging sjg at google.com
2018-10-09 23:54 ` [U-Boot] [PATCH 38/45] ctags: Minor changes to fix ctags output sjg at google.com
2018-10-09 23:54 ` [U-Boot] [PATCH 39/45] fdt: Allow C++ comments in link scripts and DT files sjg at google.com
2018-10-09 23:54 ` [U-Boot] [PATCH 37/45] panel: Expand the backlight support sjg at google.com
2018-10-09 23:54 ` [U-Boot] [PATCH 36/45] test: panel: Add a test for the panel uclass sjg at google.com
2018-10-09 23:54 ` [U-Boot] [PATCH 35/45] cros_ec: Add support for v3 messages on LPC sjg at google.com
2018-10-09 23:54 ` [U-Boot] [PATCH 34/45] cros_ec: Update cros_ec_read_hash() to specify the image sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 32/45] cros: Update ec_commands to latest version sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 31/45] Rename GPT_HEADER_SIGNATURE to avoid conflict sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 30/45] Add a header file for strings sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 29/45] malloc_simple: Add logging of allocations sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 28/45] log: Add comments to the rest of the log categories sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 27/45] binman: Add a test for Intel reference code sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 26/45] binman: Move to three-digit test-file numbers sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 25/45] tpm: Add a few new commands for v1 sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 24/45] tpm: Tidy up logging in tpm-common.c sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 23/45] tpm: Use livetree and allow children sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 21/45] fdt: Remove fdtdec_decode_region() function sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 20/45] dm: spi: Add logging of some return values sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 19/45] cros: Adjust board_get_cros_ec_dev() to return a udevice sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 18/45] cros: Update cros_ec code to use struct udevice sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 17/45] fdt: Allow libfdt in TPL sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 16/45] serial: Allow serial to be absent " sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 15/45] tpm: Add support for SPL and TPL sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 14/45] fdt: Allow indicating a node is for U-Boot proper only sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 13/45] doc: Update docs for device tree in SPL, TPL sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 12/45] fdt: Document the fact that dtc is now built sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 11/45] rtc: Allow use of RTC in SPL and TPL sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 10/45] Kconfig: Convert CONFIG_RTC_MC146818 to Kconfig sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 09/45] blk: Support block drivers in TPL sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 08/45] spl: misc: Allow misc drivers in SPL and TPL sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 07/45] Makefile: Add a warning if SPL/TPL cannot be built sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 06/45] spl: input: Allow input in SPL and TPL sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 05/45] sf: Avoid allocating memory on every read operation sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 04/45] dm: core: Update ofnode to read binman-style flash entry sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 03/45] dm: core: Add a function to find the first inactive child sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 02/45] dm: core: Update some functions to use const sjg at google.com
2018-10-09 23:55 ` [U-Boot] [PATCH 01/45] dm: core: Alloc uclass-private data to be cache-aligned sjg at google.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181001182249.129565-33-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.