All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Jesper Nilsson <jesper.nilsson@axis.com>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-arm-kernel@axis.com>
Subject: [PATCH 10/24] PCI: dwc: Enable iATU unroll for endpoint too
Date: Mon, 14 Jan 2019 18:54:10 +0530	[thread overview]
Message-ID: <20190114132424.6445-11-kishon@ti.com> (raw)
In-Reply-To: <20190114132424.6445-1-kishon@ti.com>

iatu_unroll_enabled flag is set only for Designware in host mode.
However iATU unroll can be applicable for endpoint mode too. Set
iatu_unroll_enabled flag in dw_pcie_setup which is common for
both host mode and endpoint mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/dwc/pcie-designware-ep.c   |  4 ----
 .../pci/controller/dwc/pcie-designware-host.c | 19 -------------------
 drivers/pci/controller/dwc/pcie-designware.c  | 19 +++++++++++++++++++
 3 files changed, 19 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 7a2925a16ab8..d5144781005b 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -515,10 +515,6 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		dev_err(dev, "dbi_base/dbi_base2 is not populated\n");
 		return -EINVAL;
 	}
-	if (pci->iatu_unroll_enabled && !pci->atu_base) {
-		dev_err(dev, "atu_base is not populated\n");
-		return -EINVAL;
-	}
 
 	ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
 	if (ret < 0) {
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index d7184e1a7d92..1fb7eece78ab 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -629,17 +629,6 @@ static struct pci_ops dw_pcie_ops = {
 	.write = dw_pcie_wr_conf,
 };
 
-static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
-{
-	u32 val;
-
-	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
-	if (val == 0xffffffff)
-		return 1;
-
-	return 0;
-}
-
 void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 	u32 val, ctrl, num_ctrls;
@@ -693,14 +682,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	 * we should not program the ATU here.
 	 */
 	if (!pp->ops->rd_other_conf) {
-		/* Get iATU unroll support */
-		pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
-		dev_dbg(pci->dev, "iATU unroll: %s\n",
-			pci->iatu_unroll_enabled ? "enabled" : "disabled");
-
-		if (pci->iatu_unroll_enabled && !pci->atu_base)
-			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
-
 		dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
 					  PCIE_ATU_TYPE_MEM, pp->mem_base,
 					  pp->mem_bus_addr, pp->mem_size);
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 93ef8c31fb39..78539452c265 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -339,6 +339,17 @@ int dw_pcie_link_up(struct dw_pcie *pci)
 		(!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
 }
 
+static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
+{
+	u32 val;
+
+	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
+	if (val == 0xffffffff)
+		return 1;
+
+	return 0;
+}
+
 void dw_pcie_setup(struct dw_pcie *pci)
 {
 	int ret;
@@ -347,6 +358,14 @@ void dw_pcie_setup(struct dw_pcie *pci)
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
 
+	/* Get iATU unroll support */
+	pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
+	dev_dbg(pci->dev, "iATU unroll: %s\n",
+		pci->iatu_unroll_enabled ? "enabled" : "disabled");
+
+	if (pci->iatu_unroll_enabled && !pci->atu_base)
+		pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
+
 	ret = of_property_read_u32(np, "num-lanes", &lanes);
 	if (ret)
 		lanes = 0;
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Jesper Nilsson <jesper.nilsson@axis.com>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-arm-kernel@axis.com
Subject: [PATCH 10/24] PCI: dwc: Enable iATU unroll for endpoint too
Date: Mon, 14 Jan 2019 18:54:10 +0530	[thread overview]
Message-ID: <20190114132424.6445-11-kishon@ti.com> (raw)
In-Reply-To: <20190114132424.6445-1-kishon@ti.com>

iatu_unroll_enabled flag is set only for Designware in host mode.
However iATU unroll can be applicable for endpoint mode too. Set
iatu_unroll_enabled flag in dw_pcie_setup which is common for
both host mode and endpoint mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/dwc/pcie-designware-ep.c   |  4 ----
 .../pci/controller/dwc/pcie-designware-host.c | 19 -------------------
 drivers/pci/controller/dwc/pcie-designware.c  | 19 +++++++++++++++++++
 3 files changed, 19 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 7a2925a16ab8..d5144781005b 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -515,10 +515,6 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		dev_err(dev, "dbi_base/dbi_base2 is not populated\n");
 		return -EINVAL;
 	}
-	if (pci->iatu_unroll_enabled && !pci->atu_base) {
-		dev_err(dev, "atu_base is not populated\n");
-		return -EINVAL;
-	}
 
 	ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
 	if (ret < 0) {
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index d7184e1a7d92..1fb7eece78ab 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -629,17 +629,6 @@ static struct pci_ops dw_pcie_ops = {
 	.write = dw_pcie_wr_conf,
 };
 
-static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
-{
-	u32 val;
-
-	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
-	if (val == 0xffffffff)
-		return 1;
-
-	return 0;
-}
-
 void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 	u32 val, ctrl, num_ctrls;
@@ -693,14 +682,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	 * we should not program the ATU here.
 	 */
 	if (!pp->ops->rd_other_conf) {
-		/* Get iATU unroll support */
-		pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
-		dev_dbg(pci->dev, "iATU unroll: %s\n",
-			pci->iatu_unroll_enabled ? "enabled" : "disabled");
-
-		if (pci->iatu_unroll_enabled && !pci->atu_base)
-			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
-
 		dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
 					  PCIE_ATU_TYPE_MEM, pp->mem_base,
 					  pp->mem_bus_addr, pp->mem_size);
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 93ef8c31fb39..78539452c265 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -339,6 +339,17 @@ int dw_pcie_link_up(struct dw_pcie *pci)
 		(!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
 }
 
+static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
+{
+	u32 val;
+
+	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
+	if (val == 0xffffffff)
+		return 1;
+
+	return 0;
+}
+
 void dw_pcie_setup(struct dw_pcie *pci)
 {
 	int ret;
@@ -347,6 +358,14 @@ void dw_pcie_setup(struct dw_pcie *pci)
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
 
+	/* Get iATU unroll support */
+	pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
+	dev_dbg(pci->dev, "iATU unroll: %s\n",
+		pci->iatu_unroll_enabled ? "enabled" : "disabled");
+
+	if (pci->iatu_unroll_enabled && !pci->atu_base)
+		pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
+
 	ret = of_property_read_u32(np, "num-lanes", &lanes);
 	if (ret)
 		lanes = 0;
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org,
	Jesper Nilsson <jesper.nilsson@axis.com>,
	Arnd Bergmann <arnd@arndb.de>, Jingoo Han <jingoohan1@gmail.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@axis.com, Kishon Vijay Abraham I <kishon@ti.com>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/24] PCI: dwc: Enable iATU unroll for endpoint too
Date: Mon, 14 Jan 2019 18:54:10 +0530	[thread overview]
Message-ID: <20190114132424.6445-11-kishon@ti.com> (raw)
In-Reply-To: <20190114132424.6445-1-kishon@ti.com>

iatu_unroll_enabled flag is set only for Designware in host mode.
However iATU unroll can be applicable for endpoint mode too. Set
iatu_unroll_enabled flag in dw_pcie_setup which is common for
both host mode and endpoint mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../pci/controller/dwc/pcie-designware-ep.c   |  4 ----
 .../pci/controller/dwc/pcie-designware-host.c | 19 -------------------
 drivers/pci/controller/dwc/pcie-designware.c  | 19 +++++++++++++++++++
 3 files changed, 19 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 7a2925a16ab8..d5144781005b 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -515,10 +515,6 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		dev_err(dev, "dbi_base/dbi_base2 is not populated\n");
 		return -EINVAL;
 	}
-	if (pci->iatu_unroll_enabled && !pci->atu_base) {
-		dev_err(dev, "atu_base is not populated\n");
-		return -EINVAL;
-	}
 
 	ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
 	if (ret < 0) {
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index d7184e1a7d92..1fb7eece78ab 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -629,17 +629,6 @@ static struct pci_ops dw_pcie_ops = {
 	.write = dw_pcie_wr_conf,
 };
 
-static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
-{
-	u32 val;
-
-	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
-	if (val == 0xffffffff)
-		return 1;
-
-	return 0;
-}
-
 void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 	u32 val, ctrl, num_ctrls;
@@ -693,14 +682,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	 * we should not program the ATU here.
 	 */
 	if (!pp->ops->rd_other_conf) {
-		/* Get iATU unroll support */
-		pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
-		dev_dbg(pci->dev, "iATU unroll: %s\n",
-			pci->iatu_unroll_enabled ? "enabled" : "disabled");
-
-		if (pci->iatu_unroll_enabled && !pci->atu_base)
-			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
-
 		dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
 					  PCIE_ATU_TYPE_MEM, pp->mem_base,
 					  pp->mem_bus_addr, pp->mem_size);
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 93ef8c31fb39..78539452c265 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -339,6 +339,17 @@ int dw_pcie_link_up(struct dw_pcie *pci)
 		(!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
 }
 
+static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
+{
+	u32 val;
+
+	val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
+	if (val == 0xffffffff)
+		return 1;
+
+	return 0;
+}
+
 void dw_pcie_setup(struct dw_pcie *pci)
 {
 	int ret;
@@ -347,6 +358,14 @@ void dw_pcie_setup(struct dw_pcie *pci)
 	struct device *dev = pci->dev;
 	struct device_node *np = dev->of_node;
 
+	/* Get iATU unroll support */
+	pci->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pci);
+	dev_dbg(pci->dev, "iATU unroll: %s\n",
+		pci->iatu_unroll_enabled ? "enabled" : "disabled");
+
+	if (pci->iatu_unroll_enabled && !pci->atu_base)
+		pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
+
 	ret = of_property_read_u32(np, "num-lanes", &lanes);
 	if (ret)
 		lanes = 0;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-01-14 13:26 UTC|newest]

Thread overview: 100+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-14 13:24 [PATCH 00/24] Add support for PCIe RC and EP mode in TI's AM654 SoC Kishon Vijay Abraham I
2019-01-14 13:24 ` Kishon Vijay Abraham I
2019-01-14 13:24 ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 01/24] PCI: keystone: Add start_link/stop_link dw_pcie_ops Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 02/24] PCI: keystone: Cleanup error_irq configuration Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 03/24] dt-bindings: PCI: keystone: Add "reg-names" binding information Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-22  0:31   ` Rob Herring
2019-01-22  0:31     ` Rob Herring
2019-01-22  0:31     ` Rob Herring
2019-01-14 13:24 ` [PATCH 04/24] PCI: keystone: Perform host initialization in a single function Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 05/24] PCI: keystone: Use platform_get_resource_byname to get memory resources Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 06/24] PCI: keystone: Move initializations to appropriate places Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 07/24] dt-bindings: PCI: Add dt-binding to configure PCIe mode Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-22  0:32   ` Rob Herring
2019-01-22  0:32     ` Rob Herring
2019-01-22  0:32     ` Rob Herring
2019-01-14 13:24 ` [PATCH 08/24] PCI: keystone: Explicitly set the " Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 09/24] dt-bindings: PCI: Document "atu" reg-names Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-22  0:48   ` Rob Herring
2019-01-22  0:48     ` Rob Herring
2019-01-23 10:04     ` Kishon Vijay Abraham I
2019-01-23 10:04       ` Kishon Vijay Abraham I
2019-01-23 10:04       ` Kishon Vijay Abraham I
2019-01-14 13:24 ` Kishon Vijay Abraham I [this message]
2019-01-14 13:24   ` [PATCH 10/24] PCI: dwc: Enable iATU unroll for endpoint too Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 11/24] PCI: dwc: Fix ATU identification for designware version >= 4.80 Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 12/24] PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 13/24] dt-bindings: PCI: Add PCI RC dt binding documentation for AM654 Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-22  0:48   ` Rob Herring
2019-01-22  0:48     ` Rob Herring
2019-01-22  0:48     ` Rob Herring
2019-01-14 13:24 ` [PATCH 14/24] PCI: keystone: Add support for PCIe RC in AM654x Platforms Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 15/24] PCI: keystone: Invoke phy_reset API before enabling PHY Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 16/24] PCI: endpoint: Add support to allocate aligned buffers to be mapped in BARs Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 17/24] PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 18/24] PCI: dwc: Fix dw_pcie_ep_find_capability to return correct capability offset Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-29  9:25   ` Gustavo Pimentel
2019-01-29  9:25     ` Gustavo Pimentel
2019-01-29  9:25     ` Gustavo Pimentel
2019-01-29 10:19     ` Kishon Vijay Abraham I
2019-01-29 10:19       ` Kishon Vijay Abraham I
2019-01-29 10:19       ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 19/24] PCI: dwc: Add callbacks for accessing dbi2 address space Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 20/24] PCI: keystone: Add support for PCIe EP in AM654x Platforms Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 21/24] PCI: designware-ep: Configure RESBAR to advertise the smallest size Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 22/24] PCI: designware-ep: Use aligned ATU window for raising MSI interrupts Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 23/24] misc: pci_endpoint_test: Add support to test PCI EP in AM654x Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24 ` [PATCH 24/24] misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-01-14 13:24   ` Kishon Vijay Abraham I
2019-02-04 16:40 ` [PATCH 00/24] Add support for PCIe RC and EP mode in TI's AM654 SoC Lorenzo Pieralisi
2019-02-04 16:40   ` Lorenzo Pieralisi
2019-02-06 12:50   ` Kishon Vijay Abraham I
2019-02-06 12:50     ` Kishon Vijay Abraham I
2019-02-06 12:50     ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190114132424.6445-11-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jesper.nilsson@axis.com \
    --cc=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@axis.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=m-karicheri2@ti.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.