From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thierry Reding Date: Fri, 8 Mar 2019 21:11:40 +0100 Subject: [U-Boot] [PATCH 6/6] p2371-2180: Add support for framebuffer carveouts In-Reply-To: <20190308201140.2383-1-thierry.reding@gmail.com> References: <20190308201140.2383-1-thierry.reding@gmail.com> Message-ID: <20190308201140.2383-6-thierry.reding@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Thierry Reding If early firmware initialized the display hardware and the display controllers are scanning out a framebuffer (e.g. a splash screen), make sure to pass information about the memory location of that framebuffer to the kernel before booting to avoid the kernel from using that memory for the buddy allocator. This same mechanism can also be used in the kernel to set up early SMMU mappings and avoid SMMU faults caused by the display controller reading from memory for which it has no mapping. Signed-off-by: Thierry Reding --- board/nvidia/p2371-2180/p2371-2180.c | 50 ++++++++++++++++++++++++++++ configs/p2371-2180_defconfig | 1 + 2 files changed, 51 insertions(+) diff --git a/board/nvidia/p2371-2180/p2371-2180.c b/board/nvidia/p2371-2180/p2371-2180.c index 212037da5ac0..d81deb0cd320 100644 --- a/board/nvidia/p2371-2180/p2371-2180.c +++ b/board/nvidia/p2371-2180/p2371-2180.c @@ -6,8 +6,11 @@ #include #include +#include +#include #include #include +#include #include "../p2571/max77620_init.h" #include "pinmux-config-p2371-2180.h" @@ -94,3 +97,50 @@ int tegra_pcie_board_init(void) return 0; } #endif /* PCI */ + +static int ft_copy_carveout(void *dst, const void *src, const char *node) +{ + struct fdt_memory fb; + int err; + + err = fdtdec_get_carveout(src, node, "memory-region", 0, &fb); + if (err < 0) { + if (err != -FDT_ERR_NOTFOUND) + printf("failed to get carveout for %s: %d\n", node, + err); + + return err; + } + + err = fdtdec_set_carveout(dst, node, "memory-region", 0, "framebuffer", + &fb); + if (err < 0) { + printf("failed to set carveout for %s: %d\n", node, err); + return err; + } + + return 0; +} + +int ft_board_setup(void *fdt, bd_t *bd) +{ + const void *cboot_fdt = (const void *)cboot_boot_x0; + static const char * const nodes[] = { + "/host1x at 50000000/dc at 54200000", + "/host1x at 50000000/dc@54240000", + }; + unsigned int i; + int err; + + for (i = 0; i < ARRAY_SIZE(nodes); i++) { + err = ft_copy_carveout(fdt, cboot_fdt, nodes[i]); + if (err < 0) { + if (err != -FDT_ERR_NOTFOUND) + printf("failed to copy carveout for %s: %d\n", + nodes[i], err); + continue; + } + } + + return 0; +} diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index b662ef143141..b66459e379ac 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -5,6 +5,7 @@ CONFIG_TEGRA210=y CONFIG_TARGET_P2371_2180=y CONFIG_NR_DRAM_BANKS=2 CONFIG_OF_SYSTEM_SETUP=y +CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P2371-2180) # " -- 2.20.1