All of lore.kernel.org
 help / color / mirror / Atom feed
From: marek.vasut@gmail.com
To: linux-pci@vger.kernel.org
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Simon Horman <horms+renesas@verge.net.au>,
	Wolfram Sang <wsa@the-dreams.de>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH V2 3/6] PCI: rcar: Replace various variable types with unsigned ones for register values
Date: Fri, 22 Mar 2019 03:38:41 +0100	[thread overview]
Message-ID: <20190322023844.18574-3-marek.vasut@gmail.com> (raw)
In-Reply-To: <20190322023844.18574-1-marek.vasut@gmail.com>

From: Marek Vasut <marek.vasut+renesas@gmail.com>

Replace various variable types with u32 or unsigned int type for
variables holding register values, since the registers are 32bit.
Note that rcar_pcie_msi_irq() still uses various variable types
because both find_first_bit() and __fls() require various variable
types as an argument.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
To: linux-pci@vger.kernel.org
---
V2: - s@unsigned long@various variable types@ in the commit message
    - Replace int with unsigned int for the $shift variable
    - Replace int with unsigned int / u32 in rcar_pcie_config_access()
---
 drivers/pci/controller/pcie-rcar.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 1408c8aa758b..66599e0c4bb4 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -169,7 +169,7 @@ enum {
 
 static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
 {
-	int shift = 8 * (where & 3);
+	unsigned int shift = 8 * (where & 3);
 	u32 val = rcar_pci_read_reg(pcie, where & ~3);
 
 	val &= ~(mask << shift);
@@ -179,7 +179,7 @@ static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
 
 static u32 rcar_read_conf(struct rcar_pcie *pcie, int where)
 {
-	int shift = 8 * (where & 3);
+	unsigned int shift = 8 * (where & 3);
 	u32 val = rcar_pci_read_reg(pcie, where & ~3);
 
 	return val >> shift;
@@ -190,7 +190,8 @@ static int rcar_pcie_config_access(struct rcar_pcie *pcie,
 		unsigned char access_type, struct pci_bus *bus,
 		unsigned int devfn, int where, u32 *data)
 {
-	int dev, func, reg, index;
+	unsigned int dev, func, index;
+	u32 reg;
 
 	dev = PCI_SLOT(devfn);
 	func = PCI_FUNC(devfn);
@@ -294,8 +295,8 @@ static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
 				int where, int size, u32 val)
 {
 	struct rcar_pcie *pcie = bus->sysdata;
-	int shift, ret;
-	u32 data;
+	int ret;
+	u32 shift, data;
 
 	ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_READ,
 				      bus, devfn, where, &data);
@@ -508,7 +509,7 @@ static void phy_write_reg(struct rcar_pcie *pcie,
 				 unsigned int rate, unsigned int addr,
 				 unsigned int lane, unsigned int data)
 {
-	unsigned long phyaddr;
+	u32 phyaddr;
 
 	phyaddr = WRITE_CMD |
 		((rate & 1) << RATE_POS) |
@@ -1116,7 +1117,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rcar_pcie *pcie;
-	unsigned int data;
+	u32 data;
 	int err;
 	int (*phy_init_fn)(struct rcar_pcie *);
 	struct pci_host_bridge *bridge;
-- 
2.20.1


  parent reply	other threads:[~2019-03-22  2:38 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-22  2:38 [PATCH V2 1/6] PCI: rcar: Clean up remaining macros defining bits marek.vasut
2019-03-22  2:38 ` [PATCH V2 2/6] PCI: rcar: Replace unsigned long with u32 in register accessors marek.vasut
2019-03-22  8:20   ` Wolfram Sang
2019-03-22  2:38 ` marek.vasut [this message]
2019-03-22  8:22   ` [PATCH V2 3/6] PCI: rcar: Replace various variable types with unsigned ones for register values Wolfram Sang
2019-03-22  8:41   ` Wolfram Sang
2019-03-23  1:28     ` Marek Vasut
2019-03-22  2:38 ` [PATCH V2 4/6] PCI: rcar: Replace (8 * n) with (n << 3) marek.vasut
2019-03-22  8:32   ` Wolfram Sang
2019-03-22  2:38 ` [PATCH V2 5/6] PCI: rcar: Clean up debug messages marek.vasut
2019-03-22  8:32   ` Wolfram Sang
2019-03-22  2:38 ` [PATCH V2 6/6] PCI: rcar: Allow 64bit MSI addresses marek.vasut
2019-03-22  8:34   ` Wolfram Sang
2019-03-23  1:52     ` Marek Vasut
2019-03-22  8:20 ` [PATCH V2 1/6] PCI: rcar: Clean up remaining macros defining bits Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190322023844.18574-3-marek.vasut@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=marek.vasut+renesas@gmail.com \
    --cc=phil.edworthy@renesas.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.