All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peng Fan <peng.fan@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 48/51] clk: imx: add i.MX8MN clk support
Date: Mon, 8 Jul 2019 01:40:41 +0000	[thread overview]
Message-ID: <20190708015333.20411-49-peng.fan@nxp.com> (raw)
In-Reply-To: <20190708015333.20411-1-peng.fan@nxp.com>

Reuse i.MX8MM clk driver for i.MX8MN.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/clk/imx/Kconfig      |  7 +++++++
 drivers/clk/imx/Makefile     |  2 +-
 drivers/clk/imx/clk-imx8mm.c | 15 +++++++++++++++
 3 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index 07ecad0a72..4beaaf507b 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -11,3 +11,10 @@ config CLK_IMX8MM
 	select CLK
 	help
 	  This enables support clock driver for i.MX8 platforms.
+
+config CLK_IMX8MN
+	bool "Clock support for i.MX8MM"
+	depends on IMX8MN
+	select CLK
+	help
+	  This enables support clock driver for i.MX8MN platforms.
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index b55566f2e9..1d30c5be6b 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -8,4 +8,4 @@ ifdef CONFIG_CLK_IMX8
 obj-$(CONFIG_IMX8QXP) += clk-imx8qxp.o
 obj-$(CONFIG_IMX8QM) += clk-imx8qm.o
 endif
-obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o
+obj-$(CONFIG_CLK_IMX8MM)$(CONFIG_CLK_IMX8MN) += clk-imx8mm.o
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 1e0669494f..e0b7d0fdc9 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -9,6 +9,7 @@
 #include <dm.h>
 #include <asm/arch/clock.h>
 #include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/clock/imx8mn-clock.h>
 
 static ulong imx8mm_clk_get_rate(struct clk *clk)
 {
@@ -16,17 +17,24 @@ static ulong imx8mm_clk_get_rate(struct clk *clk)
 
 	switch (clk->id) {
 	case IMX8MM_CLK_USDHC1_ROOT:
+	case IMX8MN_CLK_USDHC1_ROOT:
 		return get_root_clk(USDHC1_CLK_ROOT);
+	case IMX8MN_CLK_USDHC2_ROOT:
 	case IMX8MM_CLK_USDHC2_ROOT:
 		return get_root_clk(USDHC2_CLK_ROOT);
+	case IMX8MN_CLK_USDHC3_ROOT:
 	case IMX8MM_CLK_USDHC3_ROOT:
 		return get_root_clk(USDHC3_CLK_ROOT);
+	case IMX8MN_CLK_I2C1:
 	case IMX8MM_CLK_I2C1:
 		return get_root_clk(I2C1_CLK_ROOT);
+	case IMX8MN_CLK_I2C2:
 	case IMX8MM_CLK_I2C2:
 		return get_root_clk(I2C2_CLK_ROOT);
+	case IMX8MN_CLK_I2C3:
 	case IMX8MM_CLK_I2C3:
 		return get_root_clk(I2C3_CLK_ROOT);
+	case IMX8MN_CLK_I2C4:
 	case IMX8MM_CLK_I2C4:
 		return get_root_clk(I2C4_CLK_ROOT);
 	}
@@ -37,18 +45,25 @@ static ulong imx8mm_clk_get_rate(struct clk *clk)
 static int __imx8mm_clk_enable(struct clk *clk, bool enable)
 {
 	switch (clk->id) {
+	case IMX8MN_CLK_USDHC1_ROOT:
 	case IMX8MM_CLK_USDHC1_ROOT:
 		return clock_enable(CCGR_USDHC1, enable);
+	case IMX8MN_CLK_USDHC2_ROOT:
 	case IMX8MM_CLK_USDHC2_ROOT:
 		return clock_enable(CCGR_USDHC2, enable);
+	case IMX8MN_CLK_USDHC3_ROOT:
 	case IMX8MM_CLK_USDHC3_ROOT:
 		return clock_enable(CCGR_USDHC3, enable);
+	case IMX8MN_CLK_I2C1:
 	case IMX8MM_CLK_I2C1:
 		return clock_enable(CCGR_I2C1, enable);
+	case IMX8MN_CLK_I2C2:
 	case IMX8MM_CLK_I2C2:
 		return clock_enable(CCGR_I2C2, enable);
+	case IMX8MN_CLK_I2C3:
 	case IMX8MM_CLK_I2C3:
 		return clock_enable(CCGR_I2C3, enable);
+	case IMX8MN_CLK_I2C4:
 	case IMX8MM_CLK_I2C4:
 		return clock_enable(CCGR_I2C4, enable);
 	}
-- 
2.16.4

  parent reply	other threads:[~2019-07-08  1:40 UTC|newest]

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-08  1:38 [U-Boot] [PATCH V2 00/51] Support i.MX8MM/N Peng Fan
2019-07-08  1:38 ` [U-Boot] [PATCH V2 01/51] linux: compat: guard PAGE_SIZE Peng Fan
2019-07-08  1:38 ` [U-Boot] [PATCH V2 02/51] dm: clk: ignore default settings when node not valid Peng Fan
2019-07-08  1:38 ` [U-Boot] [PATCH V2 03/51] pinctrl: imx: use devfdt_get_addr_size_index Peng Fan
2019-07-08  1:38 ` [U-Boot] [PATCH V2 04/51] i2c: mxc: add CONFIG_CLK support Peng Fan
2019-07-10  8:03   ` Lukasz Majewski
2019-07-10  8:19     ` Peng Fan
2019-07-10 14:10   ` Schrempf Frieder
2019-07-11  6:43     ` Peng Fan
2019-07-08  1:38 ` [U-Boot] [PATCH V2 05/51] tools: imx8m_image: align spl bin image size Peng Fan
2019-07-08  1:38 ` [U-Boot] [PATCH V2 06/51] ddr: imx8m: fix ddr firmware location when enable SPL OF Peng Fan
2019-07-08  1:38 ` [U-Boot] [PATCH V2 07/51] tools: imx8mimage: fix HDMI/FIT parsing Peng Fan
2019-07-08  1:38 ` [U-Boot] [PATCH V2 08/51] imx8m: add image cfg for i.MX8MM lpddr4 Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 09/51] imx: add IMX8MQ kconfig entry Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 10/51] imx: add IMX8MM " Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 11/51] imx: imx8mm: add clock bindings header Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 12/51] imx: add i.MX8MM cpu type Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 13/51] imx: spl: add spl_board_boot_device for i.MX8MM Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 14/51] imx8m: update imx-regs " Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 15/51] imx: add get_cpu_rev support " Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 16/51] imx8m: rename clock to clock_imx8mq Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 17/51] imx8m: restructure clock.h Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 18/51] imx8m: add clk support for i.MX8MM Peng Fan
2019-07-08  9:07   ` Lukasz Majewski
2019-07-08  9:32     ` Peng Fan
2019-07-08 10:13       ` Lukasz Majewski
2019-07-10  0:49     ` Peng Fan
2019-07-10  7:22       ` Lukasz Majewski
2019-07-10  8:22         ` Peng Fan
2019-07-10  8:47           ` Lukasz Majewski
2019-07-08  1:39 ` [U-Boot] [PATCH V2 19/51] imx8m: soc: probe clk before relocation Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 20/51] imx8m: add pin header for i.MX8MM Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 21/51] imx: add i.MX8MM PE property Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 22/51] imx8m: Fix MMU table issue for OPTEE memory Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 23/51] imx8m: set BYPASS ID SWAP to avoid AXI bus errors Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 24/51] imx8m: Configure trustzone region 0 for non-secure access Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 25/51] imx8m: soc: enable SCTR clock before timer init Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 26/51] serial: Kconfig: make MXC_UART usable for MX7 and IMX8M Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 27/51] clk: imx: add Kconfig entry for i.MX8MM Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 28/51] clk: imx: add i.MX8MM clk driver Peng Fan
2019-07-10 14:22   ` Schrempf Frieder
2019-07-08  1:39 ` [U-Boot] [PATCH V2 29/51] imx: add i.MX8MM EVK board support Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 30/51] ddr: imx8m: Fix ddr4 driver build issue Peng Fan
2019-07-08  1:39 ` [U-Boot] [PATCH V2 31/51] imx8mq: Update the ddrc QoS setting for B1 chip Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 32/51] driver: ddr: Refine the ddr init driver on imx8m Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 33/51] ddr: imx8m: Fix the ddr init hang on imx8mq Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 34/51] imx: add i.MX8MN kconfig entry Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 35/51] imx8mn: support get_cpu_rev Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 36/51] imx8m: add clk support for i.MX8MN Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 37/51] imx8mn: set BYPASS ID SWAP to avoid AXI bus errors Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 38/51] imx: add i.MX8MN PE property Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 39/51] imx8mn: add pin header Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 40/51] imx: spl: use spl_board_boot_device for i.MX8MN Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 41/51] spl: pass args to board_return_to_bootrom Peng Fan
2019-07-10  6:23   ` Kever Yang
2019-07-10  8:09   ` Philipp Tomsich
2019-07-08  1:40 ` [U-Boot] [PATCH V2 42/51] imx: add rom api support Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 43/51] imx: cpu: restrict get_boot_device Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 44/51] imx8mn: add get_boot_device Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 45/51] tools: imx8mimage: add ROM VERSION Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 46/51] pinctrl: imx8m: support i.MX8MN Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 47/51] tools: imx8m_image: support ddr4 firmware Peng Fan
2019-07-08  1:40 ` Peng Fan [this message]
2019-07-08  1:40 ` [U-Boot] [PATCH V2 49/51] imx8m: add i.MX8MN ddr4 image cfg file Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 50/51] imx: add dtsi for i.MX8MN Peng Fan
2019-07-10  8:08   ` Lukasz Majewski
2019-07-10  8:09     ` Peng Fan
2019-07-10  8:44       ` Lukasz Majewski
2019-07-10  8:50         ` Peng Fan
2019-07-08  1:40 ` [U-Boot] [PATCH V2 51/51] imx: add i.MX8MN DDR4 board support Peng Fan
2019-07-10  8:34   ` Lukasz Majewski
2019-07-10 10:05     ` Peng Fan
2019-07-10 12:18       ` Lukasz Majewski
2019-07-08  8:47 ` [U-Boot] [PATCH V2 00/51] Support i.MX8MM/N Schrempf Frieder
2019-07-08  8:49   ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190708015333.20411-49-peng.fan@nxp.com \
    --to=peng.fan@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.