[Qemu-devel] [PATCH v4 01/18] qapi/block-core: Introduce BackupCommon

[John Snow <jsnow@redhat.com>]

drive-backup and blockdev-backup have an awful lot of things in common
that are the same. Let's fix that.

I don't deduplicate 'target', because the semantics actually did change
between each structure. Leave that one alone so it can be documented
separately.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
---
 qapi/block-core.json | 103 ++++++++++++++-----------------------------
 1 file changed, 33 insertions(+), 70 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 0d43d4f37c..0af3866015 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1315,32 +1315,23 @@
   'data': { 'node': 'str', 'overlay': 'str' } }
 
 ##
-# @DriveBackup:
+# @BackupCommon:
 #
 # @job-id: identifier for the newly-created block job. If
 #          omitted, the device name will be used. (Since 2.7)
 #
 # @device: the device name or node-name of a root node which should be copied.
 #
-# @target: the target of the new image. If the file exists, or if it
-#          is a device, the existing file/device will be used as the new
-#          destination.  If it does not exist, a new file will be created.
-#
-# @format: the format of the new destination, default is to
-#          probe if @mode is 'existing', else the format of the source
-#
 # @sync: what parts of the disk image should be copied to the destination
 #        (all the disk, only the sectors allocated in the topmost image, from a
 #        dirty bitmap, or only new I/O).
 #
-# @mode: whether and how QEMU should create a new image, default is
-#        'absolute-paths'.
-#
-# @speed: the maximum speed, in bytes per second
+# @speed: the maximum speed, in bytes per second. The default is 0,
+#         for unlimited.
 #
 # @bitmap: the name of dirty bitmap if sync is "incremental".
 #          Must be present if sync is "incremental", must NOT be present
-#          otherwise. (Since 2.4)
+#          otherwise. (Since 2.4 (drive-backup), 3.1 (blockdev-backup))
 #
 # @compress: true to compress data, if the target format supports it.
 #            (default: false) (since 2.8)
@@ -1370,75 +1361,47 @@
 # I/O.  If an error occurs during a guest write request, the device's
 # rerror/werror actions will be used.
 #
+# Since: 4.2
+##
+{ 'struct': 'BackupCommon',
+  'data': { '*job-id': 'str', 'device': 'str',
+            'sync': 'MirrorSyncMode', '*speed': 'int',
+            '*bitmap': 'str', '*compress': 'bool',
+            '*on-source-error': 'BlockdevOnError',
+            '*on-target-error': 'BlockdevOnError',
+            '*auto-finalize': 'bool', '*auto-dismiss': 'bool' } }
+
+##
+# @DriveBackup:
+#
+# @target: the target of the new image. If the file exists, or if it
+#          is a device, the existing file/device will be used as the new
+#          destination.  If it does not exist, a new file will be created.
+#
+# @format: the format of the new destination, default is to
+#          probe if @mode is 'existing', else the format of the source
+#
+# @mode: whether and how QEMU should create a new image, default is
+#        'absolute-paths'.
+#
 # Since: 1.6
 ##
 { 'struct': 'DriveBackup',
-  'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
-            '*format': 'str', 'sync': 'MirrorSyncMode',
-            '*mode': 'NewImageMode', '*speed': 'int',
-            '*bitmap': 'str', '*compress': 'bool',
-            '*on-source-error': 'BlockdevOnError',
-            '*on-target-error': 'BlockdevOnError',
-            '*auto-finalize': 'bool', '*auto-dismiss': 'bool' } }
+  'base': 'BackupCommon',
+  'data': { 'target': 'str',
+            '*format': 'str',
+            '*mode': 'NewImageMode' } }
 
 ##
 # @BlockdevBackup:
 #
-# @job-id: identifier for the newly-created block job. If
-#          omitted, the device name will be used. (Since 2.7)
-#
-# @device: the device name or node-name of a root node which should be copied.
-#
 # @target: the device name or node-name of the backup target node.
 #
-# @sync: what parts of the disk image should be copied to the destination
-#        (all the disk, only the sectors allocated in the topmost image, or
-#        only new I/O).
-#
-# @speed: the maximum speed, in bytes per second. The default is 0,
-#         for unlimited.
-#
-# @bitmap: the name of dirty bitmap if sync is "incremental".
-#          Must be present if sync is "incremental", must NOT be present
-#          otherwise. (Since 3.1)
-#
-# @compress: true to compress data, if the target format supports it.
-#            (default: false) (since 2.8)
-#
-# @on-source-error: the action to take on an error on the source,
-#                   default 'report'.  'stop' and 'enospc' can only be used
-#                   if the block device supports io-status (see BlockInfo).
-#
-# @on-target-error: the action to take on an error on the target,
-#                   default 'report' (no limitations, since this applies to
-#                   a different block device than @device).
-#
-# @auto-finalize: When false, this job will wait in a PENDING state after it has
-#                 finished its work, waiting for @block-job-finalize before
-#                 making any block graph changes.
-#                 When true, this job will automatically
-#                 perform its abort or commit actions.
-#                 Defaults to true. (Since 2.12)
-#
-# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
-#                has completely ceased all work, and awaits @block-job-dismiss.
-#                When true, this job will automatically disappear from the query
-#                list without user intervention.
-#                Defaults to true. (Since 2.12)
-#
-# Note: @on-source-error and @on-target-error only affect background
-# I/O.  If an error occurs during a guest write request, the device's
-# rerror/werror actions will be used.
-#
 # Since: 2.3
 ##
 { 'struct': 'BlockdevBackup',
-  'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
-            'sync': 'MirrorSyncMode', '*speed': 'int',
-            '*bitmap': 'str', '*compress': 'bool',
-            '*on-source-error': 'BlockdevOnError',
-            '*on-target-error': 'BlockdevOnError',
-            '*auto-finalize': 'bool', '*auto-dismiss': 'bool' } }
+  'base': 'BackupCommon',
+  'data': { 'target': 'str' } }
 
 ##
 # @blockdev-snapshot-sync:
-- 
2.21.0