From: Petr Vorel <pvorel@suse.cz>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH v3 5/5] network/route: Rewrite route-change-if into new API
Date: Thu, 25 Jul 2019 13:10:27 +0200 [thread overview]
Message-ID: <20190725111027.18716-6-pvorel@suse.cz> (raw)
In-Reply-To: <20190725111027.18716-1-pvorel@suse.cz>
* Drop route command (use just ip command), support both IPv4 and IPv6
* Use unused network range to avoid clash with real network
* Add verification with ping (previous version sent UDP datagram with
ns-udpsender, but didn't verify receiving it on rhost and didn't setup
rhost ip at all)
* Add tst_get_ifaces_cnt() into tst_net.sh
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
I guess I shouldn't add tst_get_ifaces_cnt() to tst_net.sh, if nothing
else uses it. I can move it to route-change-if.
runtest/net_stress.route | 4 +-
testcases/lib/tst_net.sh | 8 +
.../network/stress/route/00_Descriptions.txt | 18 +-
.../network/stress/route/route-change-if | 87 +++++
.../network/stress/route/route4-change-if | 324 ------------------
.../network/stress/route/route6-change-if | 323 -----------------
6 files changed, 100 insertions(+), 664 deletions(-)
create mode 100755 testcases/network/stress/route/route-change-if
delete mode 100644 testcases/network/stress/route/route4-change-if
delete mode 100644 testcases/network/stress/route/route6-change-if
diff --git a/runtest/net_stress.route b/runtest/net_stress.route
index 0cc033e1a..868dae6d1 100644
--- a/runtest/net_stress.route
+++ b/runtest/net_stress.route
@@ -4,12 +4,12 @@
route4-change-dst route-change-dst
route4-change-gw route-change-gw
-route4-change-if route4-change-if
+route4-change-if route-change-if
route4-redirect route4-redirect
route4-rmmod route4-rmmod
route6-change-dst route-change-dst -6
route6-change-gw route-change-gw -6
-route6-change-if route6-change-if
+route6-change-if route-change-if -6
route6-redirect route6-redirect
route6-rmmod route6-rmmod
diff --git a/testcases/lib/tst_net.sh b/testcases/lib/tst_net.sh
index df91fd772..6f934fda9 100644
--- a/testcases/lib/tst_net.sh
+++ b/testcases/lib/tst_net.sh
@@ -285,6 +285,14 @@ tst_get_ifaces()
fi
}
+# Get count of test interfaces for local/remote host.
+tst_get_ifaces_cnt()
+{
+ tst_test_cmds awk
+ local type="${1:-lhost}"
+ echo "$(tst_get_ifaces $type)" | awk '{print NF}'
+}
+
# Get HW addresses from defined test interface names.
# tst_get_hwaddrs [TYPE]
# TYPE: { lhost | rhost }; Default value is 'lhost'.
diff --git a/testcases/network/stress/route/00_Descriptions.txt b/testcases/network/stress/route/00_Descriptions.txt
index 2a98636ad..322b43c31 100644
--- a/testcases/network/stress/route/00_Descriptions.txt
+++ b/testcases/network/stress/route/00_Descriptions.txt
@@ -6,13 +6,9 @@ route-change-gw
Verify the IPv4/IPv6 is not broken when ip command changes route
gateway many times
-route4-change-if01
- Verify the kernel is not crashed when the interface of an IPv4 route is
- changed frequently by route command
-
-route4-change-if02
- Verify the kernel is not crashed when the interface of an IPv4 route is
- changed frequently by ip command
+route-change-if
+ Verify the IPv4/IPv6 is not broken when ip command changes route
+ interface many times
route4-redirect01
Verify the kernel is not crashed when the IPv4 route is modified by
@@ -27,14 +23,6 @@ route4-rmmod02
then it is deleted by the removing network driver
-route6-change-if01
- Verify the kernel is not crashed when the interface of an IPv6 route is
- changed frequently by route command
-
-route6-change-if02
- Verify the kernel is not crashed when the interface of an IPv6 route is
- changed frequently by ip command
-
route6-redirect01
Verify the kernel is not crashed when the IPv6 route is modified by
ICMP Redirects frequently
diff --git a/testcases/network/stress/route/route-change-if b/testcases/network/stress/route/route-change-if
new file mode 100755
index 000000000..092adf930
--- /dev/null
+++ b/testcases/network/stress/route/route-change-if
@@ -0,0 +1,87 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2019 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) International Business Machines Corp., 2006
+# Author: Mitsuru Chinen <mitch@jp.ibm.com>
+
+# Change route interface
+# lhost: 10.23.x.2, gw (on rhost): 10.23.x.1, rhost: 10.23.0.1, switching ifaces on lhost
+
+TST_TESTFUNC="test_if"
+. route-lib.sh
+TST_CLEANUP="cleanup"
+
+add_macvlan()
+{
+ local action="add"
+ local OPTIND
+ while getopts d opt; do
+ case "$opt" in
+ d) action="del";;
+ esac
+ done
+ shift $((OPTIND - 1))
+
+ local iface="$1"
+ local type="${2:-lhost}"
+
+ cmd="ip link $action $iface link $(tst_iface $type) type macvlan mode bridge"
+ if [ $type = "lhost" ]; then
+ ROD $cmd
+ [ "$action" = "add" ] || return
+ LHOST_IFACES="$LHOST_IFACES $iface"
+ else
+ tst_rhost_run -s -c "$cmd"
+ [ "$action" = "add" ] || return
+ RHOST_IFACES="$RHOST_IFACES $iface"
+ fi
+ tst_init_iface $type 1
+}
+
+setup()
+{
+ tst_res TINFO "change IPv$TST_IPVER route interface $NS_TIMES times"
+
+ rt="$(tst_ipaddr_un -m 0)"
+ rhost="$(tst_ipaddr_un 0 1)"
+ tst_add_ipaddr -s -a $rhost rhost
+
+ if [ $(tst_get_ifaces_cnt) -lt 2 ]; then
+ new_liface="ltp_mv2"
+ tst_res TINFO "2 or more local ifaces required, adding $new_liface"
+ add_macvlan $new_liface
+ fi
+
+ if [ $(tst_get_ifaces_cnt rhost) -lt 2 ]; then
+ new_riface="ltp_mv1"
+ tst_res TINFO "2 or more remote ifaces required, adding $new_riface"
+ add_macvlan $new_riface rhost
+ fi
+}
+
+test_if()
+{
+ local gw="$(tst_ipaddr_un $(($1 + 1)) 1)"
+ local lhost="$(tst_ipaddr_un $(($1 + 1)) 2)"
+ local link_num="$(($1 % $(tst_get_ifaces_cnt)))"
+ local iface="$(tst_iface lhost $link_num)"
+
+ tst_res TINFO "testing route over interface '$iface' with gateway '$gw'"
+
+ tst_add_ipaddr -s -a $lhost lhost $link_num
+ tst_add_ipaddr -s -a $gw rhost $link_num
+ ROD ip route add $rt dev $iface via $gw
+ EXPECT_PASS ping$TST_IPV6 -c1 -I $lhost $rhost
+ ROD ip route del $rt dev $iface via $gw
+ tst_del_ipaddr -s -a $lhost lhost $link_num
+ tst_del_ipaddr -s -a $gw rhost $link_num
+}
+
+cleanup()
+{
+ [ "$new_liface" ] && add_macvlan -d $new_liface
+ [ "$new_riface" ] && add_macvlan -d $new_riface rhost
+ route_cleanup
+}
+
+tst_run
diff --git a/testcases/network/stress/route/route4-change-if b/testcases/network/stress/route/route4-change-if
deleted file mode 100644
index 8753203d0..000000000
--- a/testcases/network/stress/route/route4-change-if
+++ /dev/null
@@ -1,324 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# route4-change-if
-#
-# Description:
-# Verify the kernel is not crashed when the interface of an IPv4 route is
-# changed frequently
-# test01 - by route command
-# test02 - by ip command
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# Mar 17 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../ ; pwd)`}
-export LTPROOT
-
-# Total number of the test case
-TST_TOTAL=2
-export TST_TOTAL
-
-# Default of the test case ID and the test case count
-TCID=route4-change-if
-TST_COUNT=0
-export TCID
-export TST_COUNT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# The number of times where route is changed
-NS_TIMES=${NS_TIMES:-10000}
-
-# The first 2 ocnted of the Network portion of the gateway address
-IPV4_NETWORK_PRE=${IPV4_NETWORK_PRE:-"10.0"}
-
-# Netmask of for the gateway
-IPV4_NETMASK_NUM=24
-
-# Host portion of the IPv4 address
-LHOST_IPV4_HOST=${LHOST_IPV4_HOST:-"2"} # src
-RHOST_IPV4_HOST=${RHOST_IPV4_HOST:-"1"} # gateway
-
-# The destination network
-DST_NETWORK="10.10.0" # destination network would be 10.10.0.0/24
-DST_HOST="5"
-DST_PORT="7"
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_setup
-#
-# DESCRIPTION:
-# Make a IPv4 connectivity
-#
-# SET VALUES:
-# rhost_ipv4addr - IPv4 Address of the remote host
-# lhost_ifname - Interface name of the local host
-# rhost_ifname - Interface name of the remote host
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- TCID=route4-change-if
- TST_COUNT=0
-
- # Get the number of the test links
- link_total=`echo $LHOST_HWADDRS | wc -w`
- rhost_link_total=`echo $RHOST_HWADDRS | wc -w`
- if [ $link_total -ne $rhost_link_total ]; then
- tst_resm TBROK "The number of element in LHOST_HWADDRS differs from RHOST_HWADDRS"
- exit $TST_TOTAL
- fi
- if [ $link_total -lt 2 ]; then
- tst_resm TBROK "This test case requires plural Test Links"
- exit $TST_TOTAL
- fi
-
- lhost_ifname_array=""
- rhost_ifname_array=""
- link_num=0
- while [ $link_num -lt $link_total ]; do
- # Get the Interface names of the local host
- lhost_ifname=`get_ifname lhost ${link_num}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
- lhost_ifname_array="$lhost_ifname_array $lhost_ifname"
-
- # Get the Interface names of the remote host
- rhost_ifname=`get_ifname rhost ${link_num}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
- rhost_ifname_array="$rhost_ifname_array $rhost_ifname"
-
- # Initialize the interfaces of the remote host
- initialize_if rhost ${link_num}
-
- # Set IPv4 address to the interface of the remote host
- set_ipv4addr rhost ${link_num} "${IPV4_NETWORK_PRE}.${link_num}" ${RHOST_IPV4_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign IP address to the interface $rhost_ifname at the remote host"
- exit $TST_TOTAL
- fi
-
- link_num=`expr $link_num + 1`
- done
-}
-
-
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_cleanup
-#
-# DESCRIPTION:
-# Recover the tested interfaces
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- # Make sure to kill the udp datagram sender
- killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- # Initialize the interfaces
- link_num=0
- while [ $link_num -lt $link_total ]; do
- initialize_if lhost ${link_num}
- initialize_if rhost ${link_num}
- link_num=`expr $link_num + 1`
- done
-}
-
-
-#-----------------------------------------------------------------------
-#
-# FUNCTION:
-# test_body
-#
-# DESCRIPTION:
-# main code of the test
-#
-# Arguments:
-# $1: define the test type
-# 1 - route command case
-# 2 - ip command case
-#
-#-----------------------------------------------------------------------
-test_body()
-{
- test_type=$1
-
- TCID=route4-change-if0${test_type}
- TST_COUNT=$test_type
-
- case $test_type in
- 1)
- test_command="route"
- ;;
- 2)
- test_command="ip"
- ;;
- *)
- tst_resm TBROK "unspecified case"
- return 1
- ;;
- esac
-
- tst_resm TINFO "Verify the kernel is not crashed when the interface of an IPv4 route is changed frequently by $test_command command in $NS_TIMES times"
-
- link_num=0
- while [ $link_num -lt $link_total ]; do
- # Initialize the interface of the local host
- initialize_if lhost ${link_num}
-
- # Assign IPv4 address to the interface of the local host
- set_ipv4addr lhost ${link_num} "${IPV4_NETWORK_PRE}.${link_num}" ${LHOST_IPV4_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign an IPv4 address at the local host"
- return 1
- fi
-
- # Check the connectivity to the gateway
- field=`expr $link_num + 1`
- lhost_ifname=`echo $lhost_ifname_array | cut -d ' ' -f $field`
- check_icmpv4_connectivity $lhost_ifname "${IPV4_NETWORK_PRE}.${link_num}.${LHOST_IPV4_HOST}"
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Test Link $link_num is somthing wrong."
- return 1
- fi
- link_num=`expr $link_num + 1`
- done
-
- # Set the variables regarding the destination host
- dst_addr=${DST_NETWORK}.${DST_HOST}
- dst_network=${DST_NETWORK}.0
-
- # Set the first route
- link_num=0
- field=`expr $link_num + 1`
- lhost_ifname=`echo $lhost_ifname_array | cut -d ' ' -f $field`
- gateway="${IPV4_NETWORK_PRE}.${link_num}.${RHOST_IPV4_HOST}"
- case $test_type in
- 1)
- route add -net $dst_network netmask 255.255.255.0 gw $gateway dev $lhost_ifname
- ;;
- 2)
- ip route add ${dst_network}/24 via $gateway dev $lhost_ifname
- ;;
- esac
-
- # Load the route with UDP traffic
- ns-udpsender -f 4 -D $dst_addr -p $DST_PORT -b -s 1472
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
-
- # Loop for changing the route
- cnt=0
- while [ $cnt -lt $NS_TIMES ]; do
- link_num=`expr $link_num + 1`
- if [ $link_num -ge $link_total ]; then
- link_num=0
- fi
-
- pre_lhost_ifname=$lhost_ifname
- pre_gateway=$gateway
-
- field=`expr $link_num + 1`
- lhost_ifname=`echo $lhost_ifname_array | cut -d ' ' -f $field`
- gateway="${IPV4_NETWORK_PRE}.${link_num}.${RHOST_IPV4_HOST}"
-
- case $test_type in
- 1)
- route add -net $dst_network netmask 255.255.255.0 gw $gateway dev $lhost_ifname
- route del -net $dst_network netmask 255.255.255.0 gw $pre_gateway dev $pre_lhost_ifname
- ;;
- 2)
- ip route change ${dst_network}/24 via $gateway dev $lhost_ifname
- ;;
- esac
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to change the gateway to $gateway"
- return 1
- fi
-
- # Rerun if udp datagram sender is dead
- ps auxw | fgrep -v grep | grep ns-udpsender > /dev/null
- if [ $? -ne 0 ]; then
- ns-udpsender -f 4 -D $dst_addr -p $DST_PORT -b -s 1472
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
- fi
-
- cnt=`expr $cnt + 1`
- done
-
- # Kill the udp datagram sender
- killall -SIGHUP ns-udpsender
-
- tst_resm TPASS "Test is finished correctly."
- return 0
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-# Exit Value:
-# The number of the failure
-#
-#-----------------------------------------------------------------------
-
-RC=0
-do_setup
-test_body 1 || RC=`expr $RC + 1` # Case of route command
-test_body 2 || RC=`expr $RC + 1` # Case of ip command
-do_cleanup
-
-exit $RC
diff --git a/testcases/network/stress/route/route6-change-if b/testcases/network/stress/route/route6-change-if
deleted file mode 100644
index 051ba8bcc..000000000
--- a/testcases/network/stress/route/route6-change-if
+++ /dev/null
@@ -1,323 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# route6-change-if
-#
-# Description:
-# Verify the kernel is not crashed when the interface of an IPv6 route is
-# changed frequently
-# test01 - by route command
-# test02 - by ip command
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# Mar 17 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../ ; pwd)`}
-export LTPROOT
-
-# Total number of the test case
-TST_TOTAL=2
-export TST_TOTAL
-
-# Default of the test case ID and the test case count
-TCID=route6-change-if
-TST_COUNT=0
-export TCID
-export TST_COUNT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# The number of times where route is changed
-NS_TIMES=${NS_TIMES:-10000}
-
-# The first 2 ocnted of the Network portion of the gateway address
-IPV6_NETWORK_PRE="fec0:1:1"
-
-# Netmask of for the gateway
-IPV6_NETMASK_NUM=64
-
-# Host portion of the IPv6 address
-LHOST_IPV6_HOST=":2" # src
-RHOST_IPV6_HOST=":1" # gateway
-
-# The destination network
-DST_NETWORK="fd00:100:1:1" # dest network would be fd00:100:1:1:::/64
-DST_HOST=":5"
-DST_PORT="7"
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_setup
-#
-# DESCRIPTION:
-# Make a IPv6 connectivity
-#
-# SET VALUES:
-# rhost_ipv6addr - IPv6 Address of the remote host
-# lhost_ifname - Interface name of the local host
-# rhost_ifname - Interface name of the remote host
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- TCID=route6-change-if
- TST_COUNT=0
-
- # Get the number of the test links
- link_total=`echo $LHOST_HWADDRS | wc -w`
- rhost_link_total=`echo $RHOST_HWADDRS | wc -w`
- if [ $link_total -ne $rhost_link_total ]; then
- tst_resm TBROK "The number of element in LHOST_HWADDRS differs from RHOST_HWADDRS"
- exit $TST_TOTAL
- fi
- if [ $link_total -lt 2 ]; then
- tst_resm TBROK "This test case requires plural Test Links"
- exit $TST_TOTAL
- fi
-
- lhost_ifname_array=""
- rhost_ifname_array=""
- link_num=0
- while [ $link_num -lt $link_total ]; do
- # Get the Interface names of the local host
- lhost_ifname=`get_ifname lhost ${link_num}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
- lhost_ifname_array="$lhost_ifname_array $lhost_ifname"
-
- # Get the Interface names of the remote host
- rhost_ifname=`get_ifname rhost ${link_num}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
- rhost_ifname_array="$rhost_ifname_array $rhost_ifname"
-
- # Initialize the interfaces of the remote host
- initialize_if rhost ${link_num}
-
- # Set IPv6 address to the interface of the remote host
- add_ipv6addr rhost ${link_num} "${IPV6_NETWORK_PRE}:${link_num}" ${RHOST_IPV6_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign IP address to the interface $rhost_ifname at the remote host"
- exit $TST_TOTAL
- fi
-
- link_num=`expr $link_num + 1`
- done
-}
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_cleanup
-#
-# DESCRIPTION:
-# Recover the tested interfaces
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- # Make sure to kill the udp datagram sender
- killall -SIGHUP ns-udpsender >/dev/null 2>&1
-
- # Initialize the interfaces
- link_num=0
- while [ $link_num -lt $link_total ]; do
- initialize_if lhost ${link_num}
- initialize_if rhost ${link_num}
- link_num=`expr $link_num + 1`
- done
-}
-
-
-#-----------------------------------------------------------------------
-#
-# FUNCTION:
-# test_body
-#
-# DESCRIPTION:
-# main code of the test
-#
-# Arguments:
-# $1: define the test type
-# 1 - route command case
-# 2 - ip command case
-#
-#-----------------------------------------------------------------------
-test_body()
-{
- test_type=$1
-
- TCID=route6-change-if0${test_type}
- TST_COUNT=$test_type
-
- case $test_type in
- 1)
- test_command="route"
- ;;
- 2)
- test_command="ip"
- ;;
- *)
- tst_resm TBROK "unspecified case"
- return 1
- ;;
- esac
-
- tst_resm TINFO "Verify the kernel is not crashed when the interface of an IPv6 route is changed frequently by $test_command command in $NS_TIMES times"
-
- link_num=0
- while [ $link_num -lt $link_total ]; do
- # Initialize the interface of the local host
- initialize_if lhost ${link_num}
-
- # Assign IPv6 address to the interface of the local host
- add_ipv6addr lhost ${link_num} "${IPV6_NETWORK_PRE}:${link_num}" ${LHOST_IPV6_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign an IPv6 address at the local host"
- return 1
- fi
-
- # Check the connectivity to the gateway
- field=`expr $link_num + 1`
- lhost_ifname=`echo $lhost_ifname_array | cut -d ' ' -f $field`
- check_icmpv6_connectivity $lhost_ifname "${IPV6_NETWORK_PRE}:${link_num}:${LHOST_IPV6_HOST}"
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Test Link $link_num is somthing wrong."
- return 1
- fi
- link_num=`expr $link_num + 1`
- done
-
- # Set the variables regarding the destination host
- dst_addr=${DST_NETWORK}:${DST_HOST}
- dst_network=${DST_NETWORK}::
-
- # Set the first route
- link_num=0
- field=`expr $link_num + 1`
- lhost_ifname=`echo $lhost_ifname_array | cut -d ' ' -f $field`
- gateway="${IPV6_NETWORK_PRE}:${link_num}:${RHOST_IPV6_HOST}"
- case $test_type in
- 1)
- route -A inet6 add ${dst_network}/64 gw $gateway dev $lhost_ifname
- ;;
- 2)
- ip -f inet6 route add ${dst_network}/64 via $gateway dev $lhost_ifname
- ;;
- esac
-
- # Load the route with UDP traffic
- ns-udpsender -f 6 -D $dst_addr -p $DST_PORT -b -s 1452
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
-
- # Loop for changing the route
- cnt=0
- while [ $cnt -lt $NS_TIMES ]; do
- link_num=`expr $link_num + 1`
- if [ $link_num -ge $link_total ]; then
- link_num=0
- fi
-
- pre_lhost_ifname=$lhost_ifname
- pre_gateway=$gateway
-
- field=`expr $link_num + 1`
- lhost_ifname=`echo $lhost_ifname_array | cut -d ' ' -f $field`
- gateway="${IPV6_NETWORK_PRE}:${link_num}:${RHOST_IPV6_HOST}"
-
- case $test_type in
- 1)
- route -A inet6 add ${dst_network}/64 gw $gateway dev $lhost_ifname
- route -A inet6 del ${dst_network}/64 gw $pre_gateway dev $pre_lhost_ifname
- ;;
- 2)
- ip -f inet6 route add ${dst_network}/64 via $gateway dev $lhost_ifname
- ip -f inet6 route del ${dst_network}/64 via $pre_gateway dev $pre_lhost_ifname
- ;;
- esac
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to change the gateway to $gateway"
- return 1
- fi
-
- # Rerun if udp datagram sender is dead
- ps auxw | fgrep -v grep | grep ns-udpsender > /dev/null
- if [ $? -ne 0 ]; then
- ns-udpsender -f 6 -D $dst_addr -p $DST_PORT -b -s 1452
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
- fi
-
- cnt=`expr $cnt + 1`
- done
-
- # Kill the udp datagram sender
- killall -SIGHUP ns-udpsender
-
- tst_resm TPASS "Test is finished correctly."
- return 0
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-# Exit Value:
-# The number of the failure
-#
-#-----------------------------------------------------------------------
-
-RC=0
-do_setup
-test_body 1 || RC=`expr $RC + 1` # Case of route command
-test_body 2 || RC=`expr $RC + 1` # Case of ip command
-do_cleanup
-
-exit $RC
--
2.22.0
prev parent reply other threads:[~2019-07-25 11:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-25 11:10 [LTP] [PATCH v3 0/5] net/route: rewrite route-change-{dst, gw, if} into new API Petr Vorel
2019-07-25 11:10 ` [LTP] [PATCH v3 1/5] tst_net.sh: enhance tst_add_ipaddr(), add tst_del_ipaddr() Petr Vorel
2019-07-25 11:10 ` [LTP] [PATCH v3 2/5] tst_net.sh: Add -m option to return mask in tst_ipaddr_un() Petr Vorel
2019-07-25 11:10 ` [LTP] [PATCH v3 3/5] network/route: Rewrite route-change-dst into new API Petr Vorel
2019-08-02 12:59 ` Petr Vorel
2019-07-25 11:10 ` [LTP] [PATCH v3 4/5] network/route: Rewrite route-change-gw " Petr Vorel
2019-08-06 13:38 ` Alexey Kodanev
2019-08-06 19:55 ` Petr Vorel
2019-08-08 11:59 ` Alexey Kodanev
2019-08-09 16:02 ` Petr Vorel
2019-07-25 11:10 ` Petr Vorel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190725111027.18716-6-pvorel@suse.cz \
--to=pvorel@suse.cz \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.