All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: gregkh@linuxfoundation.org
Cc: stern@rowland.harvard.edu, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Kai-Heng Feng <kai.heng.feng@canonical.com>
Subject: [PATCH v2 1/2] USB: core: Make port power cycle a seperate helper function
Date: Sat, 30 Nov 2019 01:41:14 +0800	[thread overview]
Message-ID: <20191129174115.31683-1-kai.heng.feng@canonical.com> (raw)

Add a new function, hub_port_power_cycle() to power cycle port's power.
It'll be used by a following patch.

In addition to that, check the return value of usb_hub_set_port_power(),
so we don't need to wait if the set power operation fails.

Furthermore, remove parameter *hdev from usb_hub_set_port_power(), since
we can get *hdev from *hub directly.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v2:
- No change.

 drivers/usb/core/hub.c  | 30 ++++++++++++++++++++++++------
 drivers/usb/core/hub.h  |  3 +--
 drivers/usb/core/port.c |  4 ++--
 3 files changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1709895387b9..6b6cd76ac5e6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -817,9 +817,9 @@ static void hub_tt_work(struct work_struct *work)
  *
  * Return: 0 if successful. A negative error code otherwise.
  */
-int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
-			   int port1, bool set)
+int usb_hub_set_port_power(struct usb_hub *hub, int port1, bool set)
 {
+	struct usb_device *hdev = hub->hdev;
 	int ret;
 
 	if (set)
@@ -2739,6 +2739,27 @@ static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
 		|| link_state == USB_SS_PORT_LS_COMP_MOD;
 }
 
+static void hub_port_power_cycle(struct usb_hub *hub, int port1)
+{
+	struct usb_port *port_dev = hub->ports[port1  - 1];
+	int ret;
+
+	ret = usb_hub_set_port_power(hub, port1, false);
+	if (ret) {
+		dev_info(&port_dev->dev, "failed to disable port power\n");
+		return;
+	}
+
+	msleep(2 * hub_power_on_good_delay(hub));
+	ret = usb_hub_set_port_power(hub, port1, true);
+	if (ret) {
+		dev_info(&port_dev->dev, "failed to enable port power\n");
+		return;
+	}
+
+	msleep(hub_power_on_good_delay(hub));
+}
+
 static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm)
 {
@@ -5216,10 +5237,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		/* When halfway through our retry count, power-cycle the port */
 		if (i == (SET_CONFIG_TRIES / 2) - 1) {
 			dev_info(&port_dev->dev, "attempt power cycle\n");
-			usb_hub_set_port_power(hdev, hub, port1, false);
-			msleep(2 * hub_power_on_good_delay(hub));
-			usb_hub_set_port_power(hdev, hub, port1, true);
-			msleep(hub_power_on_good_delay(hub));
+			hub_port_power_cycle(hub, port1);
 		}
 	}
 	if (hub->hdev->parent ||
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index a9e24e4b8df1..325a55637a6f 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -113,8 +113,7 @@ extern int usb_hub_create_port_device(struct usb_hub *hub,
 		int port1);
 extern void usb_hub_remove_port_device(struct usb_hub *hub,
 		int port1);
-extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
-		int port1, bool set);
+extern int usb_hub_set_port_power(struct usb_hub *hub, int port1, bool set);
 extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev);
 extern int hub_port_debounce(struct usb_hub *hub, int port1,
 		bool must_be_connected);
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index bbbb35fa639f..0fc6f24c6da1 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -214,7 +214,7 @@ static int usb_port_runtime_resume(struct device *dev)
 		pm_runtime_get_sync(&peer->dev);
 
 	usb_autopm_get_interface(intf);
-	retval = usb_hub_set_port_power(hdev, hub, port1, true);
+	retval = usb_hub_set_port_power(hub, port1, true);
 	msleep(hub_power_on_good_delay(hub));
 	if (udev && !retval) {
 		/*
@@ -267,7 +267,7 @@ static int usb_port_runtime_suspend(struct device *dev)
 		return -EBUSY;
 
 	usb_autopm_get_interface(intf);
-	retval = usb_hub_set_port_power(hdev, hub, port1, false);
+	retval = usb_hub_set_port_power(hub, port1, false);
 	usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
 	if (!port_dev->is_superspeed)
 		usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
-- 
2.17.1


             reply	other threads:[~2019-11-29 17:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-29 17:41 Kai-Heng Feng [this message]
2019-11-29 17:41 ` [PATCH v2 2/2] USB: core: Attempt power cycle port when it's in eSS.Disabled state Kai-Heng Feng
2019-12-11 13:45   ` Kai-Heng Feng
2019-12-11 15:08     ` Alan Stern
2019-12-17 11:16       ` Mathias Nyman
2019-12-23 17:32         ` Kai-Heng Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191129174115.31683-1-kai.heng.feng@canonical.com \
    --to=kai.heng.feng@canonical.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.