All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: soc@kernel.org
Cc: sboyd@kernel.org, linux-arm-kernel@lists.infradead.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH 2/2] arm64: dts: bitmain: Source common clock for UART controllers
Date: Tue, 14 Jan 2020 09:33:11 +0530	[thread overview]
Message-ID: <20200114040311.6599-3-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20200114040311.6599-1-manivannan.sadhasivam@linaro.org>

Remove fixed clock and source common clock for UART controllers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts |  9 ---------
 arch/arm64/boot/dts/bitmain/bm1880.dtsi            | 12 ++++++++++++
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
index 3e8c70778e24..7a2c7f9c2660 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -49,12 +49,6 @@
 		reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
 	};
 
-	uart_clk: uart-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <500000000>;
-		#clock-cells = <0>;
-	};
-
 	soc {
 		gpio0: gpio@50027000 {
 			porta: gpio-controller@0 {
@@ -173,21 +167,18 @@
 
 &uart0 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0_default>;
 };
 
 &uart1 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
 &uart2 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_default>;
 };
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 8471662413da..fa6e6905f588 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -174,6 +174,9 @@
 		uart0: serial@58018000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x58018000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -184,6 +187,9 @@
 		uart1: serial@5801A000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801a000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -194,6 +200,9 @@
 		uart2: serial@5801C000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801c000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -204,6 +213,9 @@
 		uart3: serial@5801E000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801e000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      parent reply	other threads:[~2020-01-14  4:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-14  4:03 [PATCH 0/2] Add clock support for Bitmain BM1880 Manivannan Sadhasivam
2020-01-14  4:03 ` [PATCH 1/2] arm64: dts: bitmain: Add clock controller support for BM1880 SoC Manivannan Sadhasivam
2020-01-14  4:03 ` Manivannan Sadhasivam [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200114040311.6599-3-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=sboyd@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.