[RFC v3 04/10] OPP: Add and export helper to update voltage

[Sibi Sankar <sibis@codeaurora.org>]

Add and export 'dev_pm_opp_update_voltage' to find and update voltage
of an opp for a given frequency. This will be useful to update the opps
with voltages read back from firmware.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/opp/core.c     | 55 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h | 10 ++++++++
 2 files changed, 65 insertions(+)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 9aa2a44a5d638..f241e83ec926a 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -2503,6 +2503,61 @@ int dev_pm_opp_disable(struct device *dev, unsigned long freq)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_disable);
 
+/**
+ * dev_pm_opp_update_voltage() - Find and update voltage
+ * @dev:	device for which we do this operation
+ * @freq:	OPP frequency to update voltage
+ * @u_volt:	voltage requested for this opp
+ *
+ * Find and update voltage of a disabled opp corresponding to the given
+ * frequency. This is useful only for devices with single power supply.
+ *
+ * Return: 0 if modification was successful or a negative error value.
+ */
+int dev_pm_opp_update_voltage(struct device *dev, unsigned long freq,
+			      unsigned long u_volt)
+{
+	struct dev_pm_opp *opp = ERR_PTR(-ENODEV);
+	struct opp_table *opp_table;
+	unsigned long tol;
+	int ret = 0;
+
+	/* Find the opp_table */
+	opp_table = _find_opp_table(dev);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+		dev_err(dev, "%s: OPP table not found (%d)\n", __func__, ret);
+		return PTR_ERR(opp_table);
+	}
+
+	opp = dev_pm_opp_find_freq_exact(dev, freq, false);
+	if (IS_ERR(opp)) {
+		ret = PTR_ERR(opp);
+		goto put_table;
+	}
+
+	mutex_lock(&opp_table->lock);
+
+	/* update only if the opp is disabled */
+	if (opp->available) {
+		ret = -EBUSY;
+		goto unlock;
+	}
+
+	tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
+	opp->supplies[0].u_volt_min = u_volt - tol;
+	opp->supplies[0].u_volt = u_volt;
+	opp->supplies[0].u_volt_min = u_volt + tol;
+
+unlock:
+	mutex_unlock(&opp_table->lock);
+	dev_pm_opp_put(opp);
+put_table:
+	dev_pm_opp_put_opp_table(opp_table);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_update_voltage);
+
 /**
  * dev_pm_opp_register_notifier() - Register OPP notifier for the device
  * @dev:	Device for which notifier needs to be registered
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 62c88898bae46..b26d492cbd635 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -132,6 +132,9 @@ int dev_pm_opp_enable(struct device *dev, unsigned long freq);
 
 int dev_pm_opp_disable(struct device *dev, unsigned long freq);
 
+int dev_pm_opp_update_voltage(struct device *dev, unsigned long freq,
+			      unsigned long u_volt);
+
 int dev_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb);
 int dev_pm_opp_unregister_notifier(struct device *dev, struct notifier_block *nb);
 
@@ -311,6 +314,13 @@ static inline int dev_pm_opp_disable(struct device *dev, unsigned long freq)
 	return 0;
 }
 
+static inline int dev_pm_opp_update_voltage(struct device *dev,
+					    unsigned long freq,
+					    unsigned long u_volt)
+{
+	return 0;
+}
+
 static inline int dev_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb)
 {
 	return -ENOTSUPP;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project