All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jacob Keller <jacob.e.keller@intel.com>
To: netdev@vger.kernel.org
Cc: jiri@resnulli.us, valex@mellanox.com, linyunsheng@huawei.com,
	lihong.yang@intel.com, Jacob Keller <jacob.e.keller@intel.com>
Subject: [PATCH 09/15] ice: enable initial devlink support
Date: Thu, 30 Jan 2020 14:59:04 -0800	[thread overview]
Message-ID: <20200130225913.1671982-10-jacob.e.keller@intel.com> (raw)
In-Reply-To: <20200130225913.1671982-1-jacob.e.keller@intel.com>

Begin implementing support for the devlink interface with the ice
driver. Use devlinkm_alloc to allocate the devlink memory. The PF
private data structure is now allocated as part of the devlink instead
of as a standalone allocation.

The ice hardware is a multi-function PCIe device. Thus, each physical
function will get its own devlink instance. This means that each
function will be treated independently, with its own parameters and
configuration. This is done because the ice driver loads a separate
instance for each function.

That means that this implementation does not enable devlink to manage
device-wide resources or configuration, as each physical function will
be treated independently. This is done for simplicity, as managing
a devlink instance across multiple driver instances would significantly
increase the complexity for minimal gain.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
 drivers/net/ethernet/intel/Kconfig           |  1 +
 drivers/net/ethernet/intel/ice/Makefile      |  1 +
 drivers/net/ethernet/intel/ice/ice.h         |  4 +
 drivers/net/ethernet/intel/ice/ice_devlink.c | 88 ++++++++++++++++++++
 drivers/net/ethernet/intel/ice/ice_devlink.h | 14 ++++
 drivers/net/ethernet/intel/ice/ice_main.c    | 26 +++++-
 6 files changed, 132 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/ethernet/intel/ice/ice_devlink.c
 create mode 100644 drivers/net/ethernet/intel/ice/ice_devlink.h

diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 154e2e818ec6..ad34e4335df2 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -294,6 +294,7 @@ config ICE
 	tristate "Intel(R) Ethernet Connection E800 Series Support"
 	default n
 	depends on PCI_MSI
+	select NET_DEVLINK
 	---help---
 	  This driver supports Intel(R) Ethernet Connection E800 Series of
 	  devices.  For more information on how to identify your adapter, go
diff --git a/drivers/net/ethernet/intel/ice/Makefile b/drivers/net/ethernet/intel/ice/Makefile
index 59544b0fc086..e2502ff3229d 100644
--- a/drivers/net/ethernet/intel/ice/Makefile
+++ b/drivers/net/ethernet/intel/ice/Makefile
@@ -19,6 +19,7 @@ ice-y := ice_main.o	\
 	 ice_txrx.o	\
 	 ice_flex_pipe.o \
 	 ice_flow.o	\
+	 ice_devlink.o \
 	 ice_ethtool.o
 ice-$(CONFIG_PCI_IOV) += ice_virtchnl_pf.o ice_sriov.o
 ice-$(CONFIG_DCB) += ice_dcb.o ice_dcb_nl.o ice_dcb_lib.o
diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index cb10abb14e11..a195135f840f 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -36,6 +36,7 @@
 #include <linux/avf/virtchnl.h>
 #include <net/ipv6.h>
 #include <net/xdp_sock.h>
+#include <net/devlink.h>
 #include "ice_devids.h"
 #include "ice_type.h"
 #include "ice_txrx.h"
@@ -346,6 +347,9 @@ enum ice_pf_flags {
 struct ice_pf {
 	struct pci_dev *pdev;
 
+	/* devlink port data */
+	struct devlink_port devlink_port;
+
 	/* OS reserved IRQ details */
 	struct msix_entry *msix_entries;
 	struct ice_res_tracker *irq_tracker;
diff --git a/drivers/net/ethernet/intel/ice/ice_devlink.c b/drivers/net/ethernet/intel/ice/ice_devlink.c
new file mode 100644
index 000000000000..0b0f936122de
--- /dev/null
+++ b/drivers/net/ethernet/intel/ice/ice_devlink.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Intel Corporation. */
+
+#include "ice.h"
+#include "ice_devlink.h"
+
+const struct devlink_ops ice_devlink_ops = {
+};
+
+/**
+ * ice_devlink_register - Register devlink interface for this PF
+ * @pf: the PF to register the devlink for.
+ *
+ * Register the devlink instance associated with this physical function.
+ *
+ * @returns zero on success or an error code on failure.
+ */
+int ice_devlink_register(struct ice_pf *pf)
+{
+	struct devlink *devlink = priv_to_devlink(pf);
+	struct device *dev = ice_pf_to_dev(pf);
+	int err;
+
+	err = devlink_register(devlink, dev);
+	if (err) {
+		dev_err(dev, "devlink registration failed: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+/**
+ * ice_devlink_unregister - Unregister devlink resources for this pf.
+ * @pf: the PF structure to cleanup
+ *
+ * Releases resources used by devlink and cleans up associated memory.
+ */
+void ice_devlink_unregister(struct ice_pf *pf)
+{
+	devlink_unregister(priv_to_devlink(pf));
+}
+
+/**
+ * ice_devlink_create_port - Create a devlink port for this PF
+ * @pf: the PF to create a port for
+ *
+ * Create and register a devlink_port for this PF. Note that although each
+ * physical function connected to a separate devlink instance, the port will
+ * still be numbered according to the physical function id.
+ *
+ * @returns zero on success or an error code on failure.
+ */
+int ice_devlink_create_port(struct ice_pf *pf)
+{
+	struct devlink *devlink = priv_to_devlink(pf);
+	struct ice_vsi *vsi = ice_get_main_vsi(pf);
+	struct device *dev = ice_pf_to_dev(pf);
+	int err;
+
+	if (!vsi) {
+		dev_warn(dev, "%s: unable to find main VSI\n", __func__);
+		return -EIO;
+	}
+
+	devlink_port_attrs_set(&pf->devlink_port, DEVLINK_PORT_FLAVOUR_PHYSICAL,
+			       pf->hw.pf_id, false, 0, NULL, 0);
+	err = devlink_port_register(devlink, &pf->devlink_port, pf->hw.pf_id);
+	if (err) {
+		dev_err(dev, "devlink_port_register failed: %d\n", err);
+		return err;
+	}
+	devlink_port_type_eth_set(&pf->devlink_port, vsi->netdev);
+
+	return 0;
+}
+
+/**
+ * ice_devlink_destroy_port - Destroy the devlink_port for this PF
+ * @pf: the PF to cleanup
+ *
+ * Unregisters the devlink_port structure associated with this PF.
+ */
+void ice_devlink_destroy_port(struct ice_pf *pf)
+{
+	devlink_port_type_clear(&pf->devlink_port);
+	devlink_port_unregister(&pf->devlink_port);
+}
diff --git a/drivers/net/ethernet/intel/ice/ice_devlink.h b/drivers/net/ethernet/intel/ice/ice_devlink.h
new file mode 100644
index 000000000000..5e34f6e1b57e
--- /dev/null
+++ b/drivers/net/ethernet/intel/ice/ice_devlink.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2019, Intel Corporation. */
+
+#ifndef _ICE_DEVLINK_H_
+#define _ICE_DEVLINK_H_
+
+extern const struct devlink_ops ice_devlink_ops;
+
+int ice_devlink_register(struct ice_pf *pf);
+void ice_devlink_unregister(struct ice_pf *pf);
+int ice_devlink_create_port(struct ice_pf *pf);
+void ice_devlink_destroy_port(struct ice_pf *pf);
+
+#endif /* _ICE_DEVLINK_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 5ae671609f98..a1aa4a1b6870 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -10,6 +10,7 @@
 #include "ice_lib.h"
 #include "ice_dcb_lib.h"
 #include "ice_dcb_nl.h"
+#include "ice_devlink.h"
 
 #define DRV_VERSION_MAJOR 0
 #define DRV_VERSION_MINOR 8
@@ -2553,6 +2554,11 @@ static int ice_setup_pf_sw(struct ice_pf *pf)
 		status = -ENODEV;
 		goto unroll_vsi_setup;
 	}
+
+	status = ice_devlink_create_port(pf);
+	if (status)
+		goto unroll_vsi_setup;
+
 	/* netdev has to be configured before setting frame size */
 	ice_vsi_cfg_frame_size(vsi);
 
@@ -2582,6 +2588,8 @@ static int ice_setup_pf_sw(struct ice_pf *pf)
 		}
 	}
 
+	ice_devlink_destroy_port(pf);
+
 unroll_vsi_setup:
 	if (vsi) {
 		ice_vsi_free_q_vectors(vsi);
@@ -3180,6 +3188,7 @@ static int
 ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 {
 	struct device *dev = &pdev->dev;
+	struct devlink *devlink;
 	struct ice_pf *pf;
 	struct ice_hw *hw;
 	int err;
@@ -3195,9 +3204,11 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 		return err;
 	}
 
-	pf = devm_kzalloc(dev, sizeof(*pf), GFP_KERNEL);
-	if (!pf)
+	devlink = devlinkm_alloc(dev, &ice_devlink_ops, sizeof(*pf));
+	if (!devlink) {
+		dev_err(dev, "devlink allocation failed\n");
 		return -ENOMEM;
+	}
 
 	/* set up for high or low DMA */
 	err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
@@ -3211,6 +3222,7 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	pci_enable_pcie_error_reporting(pdev);
 	pci_set_master(pdev);
 
+	pf = devlink_priv(devlink);
 	pf->pdev = pdev;
 	pci_set_drvdata(pdev, pf);
 	set_bit(__ICE_DOWN, pf->state);
@@ -3233,6 +3245,12 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 
 	pf->msg_enable = netif_msg_init(debug, ICE_DFLT_NETIF_M);
 
+	err = ice_devlink_register(pf);
+	if (err) {
+		dev_err(dev, "ice_devlink_register failed: %d\n", err);
+		goto err_exit_unroll;
+	}
+
 #ifndef CONFIG_DYNAMIC_DEBUG
 	if (debug < -1)
 		hw->debug_mask = debug;
@@ -3384,6 +3402,7 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	ice_deinit_pf(pf);
 	ice_deinit_hw(hw);
 err_exit_unroll:
+	ice_devlink_unregister(pf);
 	pci_disable_pcie_error_reporting(pdev);
 	return err;
 }
@@ -3411,6 +3430,7 @@ static void ice_remove(struct pci_dev *pdev)
 
 	if (test_bit(ICE_FLAG_SRIOV_ENA, pf->flags))
 		ice_free_vfs(pf);
+	ice_devlink_destroy_port(pf);
 	ice_vsi_release_all(pf);
 	ice_free_irq_msix_misc(pf);
 	ice_for_each_vsi(pf, i) {
@@ -3420,6 +3440,8 @@ static void ice_remove(struct pci_dev *pdev)
 	}
 	ice_deinit_pf(pf);
 	ice_deinit_hw(&pf->hw);
+	ice_devlink_unregister(pf);
+
 	/* Issue a PFR as part of the prescribed driver unload flow.  Do not
 	 * do it via ice_schedule_reset() since there is no need to rebuild
 	 * and the service task is already stopped.
-- 
2.25.0.rc1


  parent reply	other threads:[~2020-01-30 22:59 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-30 22:58 [RFC PATCH 00/13] devlink direct region reading Jacob Keller
2020-01-30 22:58 ` [PATCH 01/15] devlink: prepare to support region operations Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-02-03 11:35   ` Jiri Pirko
2020-02-03 16:48     ` Jacob Keller
2020-02-03 17:07     ` Jacob Keller
2020-02-03 17:10       ` Jacob Keller
2020-02-03 17:14     ` Jacob Keller
2020-02-03 17:17     ` Jacob Keller
2020-01-30 22:58 ` [PATCH 02/15] devlink: add functions to take snapshot while locked Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-01-31 18:09     ` Jacob Keller
2020-02-03 11:39   ` Jiri Pirko
2020-02-03 16:45     ` Jacob Keller
2020-01-30 22:58 ` [PATCH 03/15] devlink: add operation to take an immediate snapshot Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-02-03  8:19   ` Yunsheng Lin
2020-02-03 11:50     ` Jiri Pirko
2020-02-03 11:50   ` Jiri Pirko
2020-02-03 16:33     ` Jacob Keller
2020-02-03 19:32     ` Jacob Keller
2020-02-03 21:30       ` Jiri Pirko
2020-02-04 19:20         ` Jacob Keller
2020-01-30 22:58 ` [PATCH 04/15] netdevsim: support taking immediate snapshot via devlink Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-01-31 18:12     ` Jacob Keller
2020-01-30 22:59 ` [PATCH 05/15] ice: use __le16 types for explicitly Little Endian values Jacob Keller
2020-01-30 22:59 ` [PATCH 06/15] ice: create function to read a section of the NVM and Shadow RAM Jacob Keller
2020-01-30 22:59 ` [PATCH 07/15] ice: implement full NVM read from ETHTOOL_GEEPROM Jacob Keller
2020-01-30 22:59 ` [PATCH 08/15] devlink: add devres managed devlinkm_alloc and devlinkm_free Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-01-31 18:16     ` Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-02-01  0:51     ` Jacob Keller
2020-02-01 17:43       ` Jakub Kicinski
2020-02-03 16:35         ` Jacob Keller
2020-02-03 11:29   ` Jiri Pirko
2020-02-03 16:56     ` Jacob Keller
2020-01-30 22:59 ` Jacob Keller [this message]
2020-01-30 22:59 ` [PATCH 10/15] ice: add basic handler for devlink .info_get Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-01-31 18:25     ` Jacob Keller
2020-01-30 22:59 ` [PATCH 11/15] ice: add board identifier info to " Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-01-31 18:26     ` Jacob Keller
2020-01-30 22:59 ` [PATCH 12/15] ice: add a devlink region to dump shadow RAM contents Jacob Keller
2020-01-30 22:59 ` [PATCH 13/15] devlink: support directly reading from region memory Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-01-31 18:27     ` Jacob Keller
2020-01-31 19:15     ` Jacob Keller
2020-02-03 13:44   ` Jiri Pirko
2020-02-03 16:40     ` Jacob Keller
2020-01-30 22:59 ` [PATCH 14/15] ice: support direct read of the shadow ram region Jacob Keller
2020-01-30 22:59 ` [PATCH 15/15] ice: add ice.rst devlink documentation file Jacob Keller
2020-01-31 18:07   ` Jakub Kicinski
2020-01-31 18:28     ` Jacob Keller
2020-01-30 22:59 ` [RFC PATCH 1/3] Update kernel headers Jacob Keller
2020-01-30 22:59 ` [RFC PATCH 2/3] devlink: add support for DEVLINK_CMD_REGION_TAKE_SNAPSHOT Jacob Keller
2020-01-30 22:59 ` [RFC PATCH 3/3] devlink: stop requiring snapshot for regions Jacob Keller
2020-01-30 23:03 ` [RFC PATCH 00/13] devlink direct region reading Jacob Keller
2020-01-31 18:06 ` Jakub Kicinski
2020-01-31 18:09   ` Jacob Keller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200130225913.1671982-10-jacob.e.keller@intel.com \
    --to=jacob.e.keller@intel.com \
    --cc=jiri@resnulli.us \
    --cc=lihong.yang@intel.com \
    --cc=linyunsheng@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=valex@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.