All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, alex.bennee@linaro.org
Subject: [PATCH v5 00/19] target/arm: sve load/store improvements
Date: Fri,  8 May 2020 08:43:40 -0700	[thread overview]
Message-ID: <20200508154359.7494-1-richard.henderson@linaro.org> (raw)

Version 5 splits patch 4, as requested during review.
The patches remaining unreviewed are:

0004-accel-tcg-Adjust-probe_access-call-to-page_check_.patch
0005-accel-tcg-Add-probe_access_flags.patch


r~


Original blurb:

The goal here is to support MTE, but there's some cleanup to do.

Technically, we have sufficient interfaces in cputlb.c now, but it
requires multiple tlb lookups on different interfaces to do so.

Adding probe_access_flags() allows probing the tlb and getting out
some of the flags buried in the tlb comparator, such as TLB_MMIO
and TLB_WATCHPOINT.  In addition, we get no-fault semantics,
which we don't have via probe_acccess().

Looking forward to MTE, we can examine the Tagged bit on a per-page
basis and avoid dozens of mte_check calls that must be Unchecked.
That comes later, in a new version of the MTE patch set, but I do
add comments for where the checks should be added.

Richard Henderson (19):
  exec: Add block comments for watchpoint routines
  exec: Fix cpu_watchpoint_address_matches address length
  accel/tcg: Add block comment for probe_access
  accel/tcg: Adjust probe_access call to page_check_range
  accel/tcg: Add probe_access_flags
  accel/tcg: Add endian-specific cpu_{ld,st}* operations
  target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn
  target/arm: Drop manual handling of set/clear_helper_retaddr
  target/arm: Add sve infrastructure for page lookup
  target/arm: Adjust interface of sve_ld1_host_fn
  target/arm: Use SVEContLdSt in sve_ld1_r
  target/arm: Handle watchpoints in sve_ld1_r
  target/arm: Use SVEContLdSt for multi-register contiguous loads
  target/arm: Update contiguous first-fault and no-fault loads
  target/arm: Use SVEContLdSt for contiguous stores
  target/arm: Reuse sve_probe_page for gather first-fault loads
  target/arm: Reuse sve_probe_page for scatter stores
  target/arm: Reuse sve_probe_page for gather loads
  target/arm: Remove sve_memopidx

 docs/devel/loads-stores.rst |   39 +-
 include/exec/cpu-all.h      |   13 +-
 include/exec/cpu_ldst.h     |  283 +++--
 include/exec/exec-all.h     |   39 +
 include/hw/core/cpu.h       |   23 +
 target/arm/internals.h      |    5 -
 accel/tcg/cputlb.c          |  413 ++++---
 accel/tcg/user-exec.c       |  256 +++-
 exec.c                      |    2 +-
 target/arm/sve_helper.c     | 2241 +++++++++++++++++++----------------
 target/arm/translate-sve.c  |   17 +-
 11 files changed, 1999 insertions(+), 1332 deletions(-)

-- 
2.20.1



             reply	other threads:[~2020-05-08 15:55 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-08 15:43 Richard Henderson [this message]
2020-05-08 15:43 ` [PATCH v5 01/19] exec: Add block comments for watchpoint routines Richard Henderson
2020-05-08 15:43 ` [PATCH v5 02/19] exec: Fix cpu_watchpoint_address_matches address length Richard Henderson
2020-05-09 11:59   ` Philippe Mathieu-Daudé
2020-05-08 15:43 ` [PATCH v5 03/19] accel/tcg: Add block comment for probe_access Richard Henderson
2020-05-08 15:43 ` [PATCH v5 04/19] accel/tcg: Adjust probe_access call to page_check_range Richard Henderson
2020-05-08 16:13   ` Peter Maydell
2020-05-08 16:57     ` Richard Henderson
2020-05-11 10:19       ` Peter Maydell
2020-05-08 15:43 ` [PATCH v5 05/19] accel/tcg: Add probe_access_flags Richard Henderson
2020-05-08 15:43 ` [PATCH v5 06/19] accel/tcg: Add endian-specific cpu_{ld, st}* operations Richard Henderson
2020-05-08 15:43 ` [PATCH v5 07/19] target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn Richard Henderson
2020-05-08 15:43 ` [PATCH v5 08/19] target/arm: Drop manual handling of set/clear_helper_retaddr Richard Henderson
2020-05-08 15:43 ` [PATCH v5 09/19] target/arm: Add sve infrastructure for page lookup Richard Henderson
2020-05-08 15:43 ` [PATCH v5 10/19] target/arm: Adjust interface of sve_ld1_host_fn Richard Henderson
2020-05-08 15:43 ` [PATCH v5 11/19] target/arm: Use SVEContLdSt in sve_ld1_r Richard Henderson
2020-05-08 15:43 ` [PATCH v5 12/19] target/arm: Handle watchpoints " Richard Henderson
2020-05-08 15:43 ` [PATCH v5 13/19] target/arm: Use SVEContLdSt for multi-register contiguous loads Richard Henderson
2020-05-08 15:43 ` [PATCH v5 14/19] target/arm: Update contiguous first-fault and no-fault loads Richard Henderson
2020-05-08 15:43 ` [PATCH v5 15/19] target/arm: Use SVEContLdSt for contiguous stores Richard Henderson
2020-05-08 15:43 ` [PATCH v5 16/19] target/arm: Reuse sve_probe_page for gather first-fault loads Richard Henderson
2020-05-08 15:43 ` [PATCH v5 17/19] target/arm: Reuse sve_probe_page for scatter stores Richard Henderson
2020-05-08 15:43 ` [PATCH v5 18/19] target/arm: Reuse sve_probe_page for gather loads Richard Henderson
2020-05-08 15:43 ` [PATCH v5 19/19] target/arm: Remove sve_memopidx Richard Henderson
2020-05-09  1:45 ` [PATCH v5 00/19] target/arm: sve load/store improvements no-reply
2020-05-09  9:02 ` no-reply
2020-05-11 10:35 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200508154359.7494-1-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=alex.bennee@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.