From: Angelo Dureghello <angelo.dureghello@timesys.com>
To: adrian.hunter@intel.com, ulf.hansson@linaro.org, gerg@linux-m68k.org
Cc: linux-mmc@vger.kernel.org, linux-m68k@vger.kernel.org,
Angelo Dureghello <angelo.dureghello@timesys.com>
Subject: [PATCH v5 1/3] m68k: mcf5441x: add support for esdhc mmc controller
Date: Sat, 16 May 2020 00:27:28 +0200 [thread overview]
Message-ID: <20200515222730.967105-1-angelo.dureghello@timesys.com> (raw)
Add support for sdhci-edshc mmc controller.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
---
Changes for v3:
- removed volatile cast from clk.c
Changes for v4:
- comment style fix in m5441xsim.h
Changes for v5:
- fix compilation warnings from __clk_enable2 and __clk_disable2
---
arch/m68k/coldfire/clk.c | 15 ++++++++++
arch/m68k/coldfire/device.c | 33 +++++++++++++++++++--
arch/m68k/coldfire/m5441x.c | 12 +++++++-
arch/m68k/include/asm/m5441xsim.h | 15 ++++++++++
arch/m68k/include/asm/mcfclk.h | 2 ++
include/linux/platform_data/mmc-esdhc-mcf.h | 17 +++++++++++
6 files changed, 91 insertions(+), 3 deletions(-)
create mode 100644 include/linux/platform_data/mmc-esdhc-mcf.h
diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
index 7bc666e482eb..75a057445472 100644
--- a/arch/m68k/coldfire/clk.c
+++ b/arch/m68k/coldfire/clk.c
@@ -73,6 +73,21 @@ struct clk_ops clk_ops1 = {
#endif /* MCFPM_PPMCR1 */
#endif /* MCFPM_PPMCR0 */
+static void __clk_enable2(struct clk *clk)
+{
+ __raw_writel(__raw_readl(MCFSDHC_CLK) | (1 << clk->slot), MCFSDHC_CLK);
+}
+
+static void __clk_disable2(struct clk *clk)
+{
+ __raw_writel(__raw_readl(MCFSDHC_CLK) & ~(1 << clk->slot), MCFSDHC_CLK);
+}
+
+struct clk_ops clk_ops2 = {
+ .enable = __clk_enable2,
+ .disable = __clk_disable2,
+};
+
struct clk *clk_get(struct device *dev, const char *id)
{
const char *clk_name = dev ? dev_name(dev) : id ? id : NULL;
diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
index b4103b6bfdeb..9ef4ec0aea00 100644
--- a/arch/m68k/coldfire/device.c
+++ b/arch/m68k/coldfire/device.c
@@ -22,6 +22,7 @@
#include <asm/mcfqspi.h>
#include <linux/platform_data/edma.h>
#include <linux/platform_data/dma-mcf-edma.h>
+#include <linux/platform_data/mmc-esdhc-mcf.h>
/*
* All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
@@ -551,9 +552,35 @@ static struct platform_device mcf_edma = {
.platform_data = &mcf_edma_data,
}
};
-
#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
+#if IS_ENABLED(CONFIG_MMC)
+static struct mcf_esdhc_platform_data mcf_esdhc_data = {
+ .max_bus_width = 4,
+ .cd_type = ESDHC_CD_NONE,
+};
+
+static struct resource mcf_esdhc_resources[] = {
+ {
+ .start = MCFSDHC_BASE,
+ .end = MCFSDHC_BASE + MCFSDHC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MCF_IRQ_SDHC,
+ .end = MCF_IRQ_SDHC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mcf_esdhc = {
+ .name = "sdhci-esdhc-mcf",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mcf_esdhc_resources),
+ .resource = mcf_esdhc_resources,
+ .dev.platform_data = &mcf_esdhc_data,
+};
+#endif /* IS_ENABLED(CONFIG_MMC) */
+
static struct platform_device *mcf_devices[] __initdata = {
&mcf_uart,
#if IS_ENABLED(CONFIG_FEC)
@@ -586,6 +613,9 @@ static struct platform_device *mcf_devices[] __initdata = {
#if IS_ENABLED(CONFIG_MCF_EDMA)
&mcf_edma,
#endif
+#if IS_ENABLED(CONFIG_MMC)
+ &mcf_esdhc,
+#endif
};
/*
@@ -614,4 +644,3 @@ static int __init mcf_init_devices(void)
}
arch_initcall(mcf_init_devices);
-
diff --git a/arch/m68k/coldfire/m5441x.c b/arch/m68k/coldfire/m5441x.c
index 5bd24c9b865d..ffa02de1a3fb 100644
--- a/arch/m68k/coldfire/m5441x.c
+++ b/arch/m68k/coldfire/m5441x.c
@@ -52,7 +52,7 @@ DEFINE_CLK(0, "mcfssi.0", 47, MCF_CLK);
DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
DEFINE_CLK(0, "mcfrng.0", 49, MCF_CLK);
DEFINE_CLK(0, "mcfssi.1", 50, MCF_CLK);
-DEFINE_CLK(0, "mcfsdhc.0", 51, MCF_CLK);
+DEFINE_CLK(0, "sdhci-esdhc-mcf.0", 51, MCF_CLK);
DEFINE_CLK(0, "enet-fec.0", 53, MCF_CLK);
DEFINE_CLK(0, "enet-fec.1", 54, MCF_CLK);
DEFINE_CLK(0, "switch.0", 55, MCF_CLK);
@@ -74,6 +74,10 @@ DEFINE_CLK(1, "mcfpwm.0", 34, MCF_BUSCLK);
DEFINE_CLK(1, "sys.0", 36, MCF_BUSCLK);
DEFINE_CLK(1, "gpio.0", 37, MCF_BUSCLK);
+DEFINE_CLK(2, "ipg.0", 0, MCF_CLK);
+DEFINE_CLK(2, "ahb.0", 1, MCF_CLK);
+DEFINE_CLK(2, "per.0", 2, MCF_CLK);
+
struct clk *mcf_clks[] = {
&__clk_0_2,
&__clk_0_8,
@@ -131,6 +135,11 @@ struct clk *mcf_clks[] = {
&__clk_1_34,
&__clk_1_36,
&__clk_1_37,
+
+ &__clk_2_0,
+ &__clk_2_1,
+ &__clk_2_2,
+
NULL,
};
@@ -151,6 +160,7 @@ static struct clk * const enable_clks[] __initconst = {
&__clk_0_33, /* pit.1 */
&__clk_0_37, /* eport */
&__clk_0_48, /* pll */
+ &__clk_0_51, /* esdhc */
&__clk_1_36, /* CCM/reset module/Power management */
&__clk_1_37, /* gpio */
diff --git a/arch/m68k/include/asm/m5441xsim.h b/arch/m68k/include/asm/m5441xsim.h
index 4892f314ff38..e091e36d3464 100644
--- a/arch/m68k/include/asm/m5441xsim.h
+++ b/arch/m68k/include/asm/m5441xsim.h
@@ -278,6 +278,13 @@
#define MCFGPIO_IRQ_VECBASE (MCFINT_VECBASE - MCFGPIO_IRQ_MIN)
#define MCFGPIO_PIN_MAX 87
+/*
+ * Phase Locked Loop (PLL)
+ */
+#define MCF_PLL_CR 0xFC0C0000
+#define MCF_PLL_DR 0xFC0C0004
+#define MCF_PLL_SR 0xFC0C0008
+
/*
* DSPI module.
*/
@@ -298,5 +305,13 @@
#define MCFEDMA_IRQ_INTR16 (MCFINT1_VECBASE + MCFEDMA_EDMA_INTR16)
#define MCFEDMA_IRQ_INTR56 (MCFINT2_VECBASE + MCFEDMA_EDMA_INTR56)
#define MCFEDMA_IRQ_ERR (MCFINT0_VECBASE + MCFINT0_EDMA_ERR)
+/*
+ * esdhc module.
+ */
+#define MCFSDHC_BASE 0xfc0cc000
+#define MCFSDHC_SIZE 256
+#define MCFINT2_SDHC 31
+#define MCF_IRQ_SDHC (MCFINT2_VECBASE + MCFINT2_SDHC)
+#define MCFSDHC_CLK (MCFSDHC_BASE + 0x2c)
#endif /* m5441xsim_h */
diff --git a/arch/m68k/include/asm/mcfclk.h b/arch/m68k/include/asm/mcfclk.h
index 0aca504fae31..722627e06d66 100644
--- a/arch/m68k/include/asm/mcfclk.h
+++ b/arch/m68k/include/asm/mcfclk.h
@@ -30,6 +30,8 @@ extern struct clk_ops clk_ops0;
extern struct clk_ops clk_ops1;
#endif /* MCFPM_PPMCR1 */
+extern struct clk_ops clk_ops2;
+
#define DEFINE_CLK(clk_bank, clk_name, clk_slot, clk_rate) \
static struct clk __clk_##clk_bank##_##clk_slot = { \
.name = clk_name, \
diff --git a/include/linux/platform_data/mmc-esdhc-mcf.h b/include/linux/platform_data/mmc-esdhc-mcf.h
new file mode 100644
index 000000000000..85cb786a62fe
--- /dev/null
+++ b/include/linux/platform_data/mmc-esdhc-mcf.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_PLATFORM_DATA_MCF_ESDHC_H__
+#define __LINUX_PLATFORM_DATA_MCF_ESDHC_H__
+
+enum cd_types {
+ ESDHC_CD_NONE, /* no CD, neither controller nor gpio */
+ ESDHC_CD_CONTROLLER, /* mmc controller internal CD */
+ ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */
+};
+
+struct mcf_esdhc_platform_data {
+ int max_bus_width;
+ int cd_type;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ */
--
2.26.2
next reply other threads:[~2020-05-15 22:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-15 22:27 Angelo Dureghello [this message]
2020-05-15 22:27 ` [PATCH v5 2/3] mmc: sdhci: add quirks for be to le byte swapping Angelo Dureghello
2020-05-16 18:06 ` Adrian Hunter
2020-05-15 22:27 ` [PATCH v5 3/3] mmc: host: add Coldfire esdhc support Angelo Dureghello
2020-05-16 18:09 ` Adrian Hunter
2020-05-18 8:00 ` Angelo Dureghello
2020-05-18 8:02 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200515222730.967105-1-angelo.dureghello@timesys.com \
--to=angelo.dureghello@timesys.com \
--cc=adrian.hunter@intel.com \
--cc=gerg@linux-m68k.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.