All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: qemu-devel@nongnu.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH 10/10] hw/timer: remove sh_timer.c
Date: Mon,  1 Jun 2020 01:24:27 +0900	[thread overview]
Message-ID: <20200531162427.57410-11-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <20200531162427.57410-1-ysato@users.sourceforge.jp>

SH4 TMU using new module. This file is obsolute.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 hw/timer/sh_timer.c | 341 --------------------------------------------
 1 file changed, 341 deletions(-)
 delete mode 100644 hw/timer/sh_timer.c

diff --git a/hw/timer/sh_timer.c b/hw/timer/sh_timer.c
deleted file mode 100644
index 13c4051808..0000000000
--- a/hw/timer/sh_timer.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * SuperH Timer modules.
- *
- * Copyright (c) 2007 Magnus Damm
- * Based on arm_timer.c by Paul Brook
- * Copyright (c) 2005-2006 CodeSourcery.
- *
- * This code is licensed under the GPL.
- */
-
-#include "qemu/osdep.h"
-#include "hw/hw.h"
-#include "hw/irq.h"
-#include "hw/sh4/sh.h"
-#include "qemu/timer.h"
-#include "hw/ptimer.h"
-
-//#define DEBUG_TIMER
-
-#define TIMER_TCR_TPSC          (7 << 0)
-#define TIMER_TCR_CKEG          (3 << 3)
-#define TIMER_TCR_UNIE          (1 << 5)
-#define TIMER_TCR_ICPE          (3 << 6)
-#define TIMER_TCR_UNF           (1 << 8)
-#define TIMER_TCR_ICPF          (1 << 9)
-#define TIMER_TCR_RESERVED      (0x3f << 10)
-
-#define TIMER_FEAT_CAPT   (1 << 0)
-#define TIMER_FEAT_EXTCLK (1 << 1)
-
-#define OFFSET_TCOR   0
-#define OFFSET_TCNT   1
-#define OFFSET_TCR    2
-#define OFFSET_TCPR   3
-
-typedef struct {
-    ptimer_state *timer;
-    uint32_t tcnt;
-    uint32_t tcor;
-    uint32_t tcr;
-    uint32_t tcpr;
-    int freq;
-    int int_level;
-    int old_level;
-    int feat;
-    int enabled;
-    qemu_irq irq;
-} sh_timer_state;
-
-/* Check all active timers, and schedule the next timer interrupt. */
-
-static void sh_timer_update(sh_timer_state *s)
-{
-    int new_level = s->int_level && (s->tcr & TIMER_TCR_UNIE);
-
-    if (new_level != s->old_level)
-      qemu_set_irq (s->irq, new_level);
-
-    s->old_level = s->int_level;
-    s->int_level = new_level;
-}
-
-static uint32_t sh_timer_read(void *opaque, hwaddr offset)
-{
-    sh_timer_state *s = (sh_timer_state *)opaque;
-
-    switch (offset >> 2) {
-    case OFFSET_TCOR:
-        return s->tcor;
-    case OFFSET_TCNT:
-        return ptimer_get_count(s->timer);
-    case OFFSET_TCR:
-        return s->tcr | (s->int_level ? TIMER_TCR_UNF : 0);
-    case OFFSET_TCPR:
-        if (s->feat & TIMER_FEAT_CAPT)
-            return s->tcpr;
-        /* fall through */
-    default:
-        hw_error("sh_timer_read: Bad offset %x\n", (int)offset);
-        return 0;
-    }
-}
-
-static void sh_timer_write(void *opaque, hwaddr offset,
-                            uint32_t value)
-{
-    sh_timer_state *s = (sh_timer_state *)opaque;
-    int freq;
-
-    switch (offset >> 2) {
-    case OFFSET_TCOR:
-        s->tcor = value;
-        ptimer_transaction_begin(s->timer);
-        ptimer_set_limit(s->timer, s->tcor, 0);
-        ptimer_transaction_commit(s->timer);
-        break;
-    case OFFSET_TCNT:
-        s->tcnt = value;
-        ptimer_transaction_begin(s->timer);
-        ptimer_set_count(s->timer, s->tcnt);
-        ptimer_transaction_commit(s->timer);
-        break;
-    case OFFSET_TCR:
-        ptimer_transaction_begin(s->timer);
-        if (s->enabled) {
-            /* Pause the timer if it is running.  This may cause some
-               inaccuracy dure to rounding, but avoids a whole lot of other
-               messyness.  */
-            ptimer_stop(s->timer);
-        }
-        freq = s->freq;
-        /* ??? Need to recalculate expiry time after changing divisor.  */
-        switch (value & TIMER_TCR_TPSC) {
-        case 0: freq >>= 2; break;
-        case 1: freq >>= 4; break;
-        case 2: freq >>= 6; break;
-        case 3: freq >>= 8; break;
-        case 4: freq >>= 10; break;
-	case 6:
-	case 7: if (s->feat & TIMER_FEAT_EXTCLK) break;
-	default: hw_error("sh_timer_write: Reserved TPSC value\n"); break;
-        }
-        switch ((value & TIMER_TCR_CKEG) >> 3) {
-	case 0: break;
-        case 1:
-        case 2:
-        case 3: if (s->feat & TIMER_FEAT_EXTCLK) break;
-	default: hw_error("sh_timer_write: Reserved CKEG value\n"); break;
-        }
-        switch ((value & TIMER_TCR_ICPE) >> 6) {
-	case 0: break;
-        case 2:
-        case 3: if (s->feat & TIMER_FEAT_CAPT) break;
-	default: hw_error("sh_timer_write: Reserved ICPE value\n"); break;
-        }
-	if ((value & TIMER_TCR_UNF) == 0)
-            s->int_level = 0;
-
-	value &= ~TIMER_TCR_UNF;
-
-	if ((value & TIMER_TCR_ICPF) && (!(s->feat & TIMER_FEAT_CAPT)))
-            hw_error("sh_timer_write: Reserved ICPF value\n");
-
-	value &= ~TIMER_TCR_ICPF; /* capture not supported */
-
-	if (value & TIMER_TCR_RESERVED)
-            hw_error("sh_timer_write: Reserved TCR bits set\n");
-        s->tcr = value;
-        ptimer_set_limit(s->timer, s->tcor, 0);
-        ptimer_set_freq(s->timer, freq);
-        if (s->enabled) {
-            /* Restart the timer if still enabled.  */
-            ptimer_run(s->timer, 0);
-        }
-        ptimer_transaction_commit(s->timer);
-        break;
-    case OFFSET_TCPR:
-        if (s->feat & TIMER_FEAT_CAPT) {
-            s->tcpr = value;
-	    break;
-	}
-    default:
-        hw_error("sh_timer_write: Bad offset %x\n", (int)offset);
-    }
-    sh_timer_update(s);
-}
-
-static void sh_timer_start_stop(void *opaque, int enable)
-{
-    sh_timer_state *s = (sh_timer_state *)opaque;
-
-#ifdef DEBUG_TIMER
-    printf("sh_timer_start_stop %d (%d)\n", enable, s->enabled);
-#endif
-
-    ptimer_transaction_begin(s->timer);
-    if (s->enabled && !enable) {
-        ptimer_stop(s->timer);
-    }
-    if (!s->enabled && enable) {
-        ptimer_run(s->timer, 0);
-    }
-    ptimer_transaction_commit(s->timer);
-    s->enabled = !!enable;
-
-#ifdef DEBUG_TIMER
-    printf("sh_timer_start_stop done %d\n", s->enabled);
-#endif
-}
-
-static void sh_timer_tick(void *opaque)
-{
-    sh_timer_state *s = (sh_timer_state *)opaque;
-    s->int_level = s->enabled;
-    sh_timer_update(s);
-}
-
-static void *sh_timer_init(uint32_t freq, int feat, qemu_irq irq)
-{
-    sh_timer_state *s;
-
-    s = (sh_timer_state *)g_malloc0(sizeof(sh_timer_state));
-    s->freq = freq;
-    s->feat = feat;
-    s->tcor = 0xffffffff;
-    s->tcnt = 0xffffffff;
-    s->tcpr = 0xdeadbeef;
-    s->tcr = 0;
-    s->enabled = 0;
-    s->irq = irq;
-
-    s->timer = ptimer_init(sh_timer_tick, s, PTIMER_POLICY_DEFAULT);
-
-    sh_timer_write(s, OFFSET_TCOR >> 2, s->tcor);
-    sh_timer_write(s, OFFSET_TCNT >> 2, s->tcnt);
-    sh_timer_write(s, OFFSET_TCPR >> 2, s->tcpr);
-    sh_timer_write(s, OFFSET_TCR  >> 2, s->tcpr);
-    /* ??? Save/restore.  */
-    return s;
-}
-
-typedef struct {
-    MemoryRegion iomem;
-    MemoryRegion iomem_p4;
-    MemoryRegion iomem_a7;
-    void *timer[3];
-    int level[3];
-    uint32_t tocr;
-    uint32_t tstr;
-    int feat;
-} tmu012_state;
-
-static uint64_t tmu012_read(void *opaque, hwaddr offset,
-                            unsigned size)
-{
-    tmu012_state *s = (tmu012_state *)opaque;
-
-#ifdef DEBUG_TIMER
-    printf("tmu012_read 0x%lx\n", (unsigned long) offset);
-#endif
-
-    if (offset >= 0x20) {
-        if (!(s->feat & TMU012_FEAT_3CHAN))
-	    hw_error("tmu012_write: Bad channel offset %x\n", (int)offset);
-        return sh_timer_read(s->timer[2], offset - 0x20);
-    }
-
-    if (offset >= 0x14)
-        return sh_timer_read(s->timer[1], offset - 0x14);
-
-    if (offset >= 0x08)
-        return sh_timer_read(s->timer[0], offset - 0x08);
-
-    if (offset == 4)
-        return s->tstr;
-
-    if ((s->feat & TMU012_FEAT_TOCR) && offset == 0)
-        return s->tocr;
-
-    hw_error("tmu012_write: Bad offset %x\n", (int)offset);
-    return 0;
-}
-
-static void tmu012_write(void *opaque, hwaddr offset,
-                        uint64_t value, unsigned size)
-{
-    tmu012_state *s = (tmu012_state *)opaque;
-
-#ifdef DEBUG_TIMER
-    printf("tmu012_write 0x%lx 0x%08x\n", (unsigned long) offset, value);
-#endif
-
-    if (offset >= 0x20) {
-        if (!(s->feat & TMU012_FEAT_3CHAN))
-	    hw_error("tmu012_write: Bad channel offset %x\n", (int)offset);
-        sh_timer_write(s->timer[2], offset - 0x20, value);
-	return;
-    }
-
-    if (offset >= 0x14) {
-        sh_timer_write(s->timer[1], offset - 0x14, value);
-	return;
-    }
-
-    if (offset >= 0x08) {
-        sh_timer_write(s->timer[0], offset - 0x08, value);
-	return;
-    }
-
-    if (offset == 4) {
-        sh_timer_start_stop(s->timer[0], value & (1 << 0));
-        sh_timer_start_stop(s->timer[1], value & (1 << 1));
-        if (s->feat & TMU012_FEAT_3CHAN)
-            sh_timer_start_stop(s->timer[2], value & (1 << 2));
-	else
-            if (value & (1 << 2))
-                hw_error("tmu012_write: Bad channel\n");
-
-	s->tstr = value;
-	return;
-    }
-
-    if ((s->feat & TMU012_FEAT_TOCR) && offset == 0) {
-        s->tocr = value & (1 << 0);
-    }
-}
-
-static const MemoryRegionOps tmu012_ops = {
-    .read = tmu012_read,
-    .write = tmu012_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-void tmu012_init(MemoryRegion *sysmem, hwaddr base,
-                 int feat, uint32_t freq,
-		 qemu_irq ch0_irq, qemu_irq ch1_irq,
-		 qemu_irq ch2_irq0, qemu_irq ch2_irq1)
-{
-    tmu012_state *s;
-    int timer_feat = (feat & TMU012_FEAT_EXTCLK) ? TIMER_FEAT_EXTCLK : 0;
-
-    s = (tmu012_state *)g_malloc0(sizeof(tmu012_state));
-    s->feat = feat;
-    s->timer[0] = sh_timer_init(freq, timer_feat, ch0_irq);
-    s->timer[1] = sh_timer_init(freq, timer_feat, ch1_irq);
-    if (feat & TMU012_FEAT_3CHAN)
-        s->timer[2] = sh_timer_init(freq, timer_feat | TIMER_FEAT_CAPT,
-				    ch2_irq0); /* ch2_irq1 not supported */
-
-    memory_region_init_io(&s->iomem, NULL, &tmu012_ops, s,
-                          "timer", 0x100000000ULL);
-
-    memory_region_init_alias(&s->iomem_p4, NULL, "timer-p4",
-                             &s->iomem, 0, 0x1000);
-    memory_region_add_subregion(sysmem, P4ADDR(base), &s->iomem_p4);
-
-    memory_region_init_alias(&s->iomem_a7, NULL, "timer-a7",
-                             &s->iomem, 0, 0x1000);
-    memory_region_add_subregion(sysmem, A7ADDR(base), &s->iomem_a7);
-    /* ??? Save/restore.  */
-}
-- 
2.20.1



  parent reply	other threads:[~2020-05-31 16:25 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-31 16:24 [PATCH 00/10] Add RX hardware emulation Yoshinori Sato
2020-05-31 16:24 ` [PATCH 01/10] hw/intc: RX62N interrupt controller (ICUa) Yoshinori Sato
2020-06-05 15:45   ` Philippe Mathieu-Daudé
2020-05-31 16:24 ` [PATCH 02/10] hw/timer: Renesas 8bit timer module Yoshinori Sato
2020-05-31 16:24 ` [PATCH 03/10] hw/timer: Renesas TMU/CMT module Yoshinori Sato
2020-05-31 16:24 ` [PATCH 04/10] hw/char: Renesas SCI module Yoshinori Sato
2020-06-05 16:05   ` Philippe Mathieu-Daudé
2020-05-31 16:24 ` [PATCH 05/10] hw/rx: RX MCU and target Yoshinori Sato
2020-06-05 16:09   ` Philippe Mathieu-Daudé
2020-05-31 16:24 ` [PATCH 06/10] Add rx-softmmu Yoshinori Sato
2020-05-31 16:24 ` [PATCH 07/10] hw/sh4: Convert renesas_sci Yoshinori Sato
2020-05-31 16:24 ` [PATCH 08/10] hw/char: remove sh_serial.c Yoshinori Sato
2020-05-31 16:24 ` [PATCH 09/10] hw/sh4: Convert to renesas_timer.c Yoshinori Sato
2020-05-31 16:24 ` Yoshinori Sato [this message]
2020-05-31 16:45 ` [PATCH 00/10] Add RX hardware emulation Philippe Mathieu-Daudé
2020-06-01 14:32   ` Yoshinori Sato
2020-06-02 17:04     ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200531162427.57410-11-ysato@users.sourceforge.jp \
    --to=ysato@users.sourceforge.jp \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.