All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Awogbemila <awogbemila@google.com>
To: netdev@vger.kernel.org
Cc: David Awogbemila <awogbemila@google.com>,
	Yangchun Fu <yangchun@google.com>
Subject: [PATCH net-next v3 9/9] gve: Enable Link Speed Reporting in the driver.
Date: Tue,  8 Sep 2020 11:39:09 -0700	[thread overview]
Message-ID: <20200908183909.4156744-10-awogbemila@google.com> (raw)
In-Reply-To: <20200908183909.4156744-1-awogbemila@google.com>

This change allows the driver to report the device link speed
when the ethtool command:
	ethtool <nic name>
is run.
Getting the link speed is done via a new admin queue command:
ReportLinkSpeed.

Reviewed-by: Yangchun Fu <yangchun@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
---
 drivers/net/ethernet/google/gve/gve.h         |  4 +++
 drivers/net/ethernet/google/gve/gve_adminq.c  | 31 +++++++++++++++++++
 drivers/net/ethernet/google/gve/gve_adminq.h  |  9 ++++++
 drivers/net/ethernet/google/gve/gve_ethtool.c | 14 ++++++++-
 4 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index b348eb360cd0..22000795b6dc 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -232,6 +232,7 @@ struct gve_priv {
 	u32 adminq_dcfg_device_resources_cnt;
 	u32 adminq_set_driver_parameter_cnt;
 	u32 adminq_report_stats_cnt;
+	u32 adminq_report_link_speed_cnt;
 
 	/* Global stats */
 	u32 interface_up_cnt; /* count of times interface turned up since last reset */
@@ -253,6 +254,9 @@ struct gve_priv {
 	unsigned long service_timer_period;
 	struct timer_list service_timer;
 
+	/* Gvnic device link speed from hypervisor. */
+	u64 link_speed;
+
   /* Gvnic device's dma mask, set during probe. */
 	u8 dma_mask;
 };
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 341a17b36f06..2372e18943b8 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -36,6 +36,7 @@ int gve_adminq_alloc(struct device *dev, struct gve_priv *priv)
 	priv->adminq_dcfg_device_resources_cnt = 0;
 	priv->adminq_set_driver_parameter_cnt = 0;
 	priv->adminq_report_stats_cnt = 0;
+	priv->adminq_report_link_speed_cnt = 0;
 
 	/* Setup Admin queue with the device */
 	iowrite32be(priv->adminq_bus_addr / PAGE_SIZE,
@@ -238,6 +239,9 @@ static int gve_adminq_issue_cmd(struct gve_priv *priv,
 	case GVE_ADMINQ_REPORT_STATS:
 		priv->adminq_report_stats_cnt++;
 		break;
+	case GVE_ADMINQ_REPORT_LINK_SPEED:
+		priv->adminq_report_link_speed_cnt++;
+		break;
 	default:
 		dev_err(&priv->pdev->dev, "unknown AQ command opcode %d\n", opcode);
 	}
@@ -596,3 +600,30 @@ int gve_adminq_report_stats(struct gve_priv *priv, u64 stats_report_len,
 	return gve_adminq_execute_cmd(priv, &cmd);
 }
 
+int gve_adminq_report_link_speed(struct gve_priv *priv)
+{
+	union gve_adminq_command gvnic_cmd;
+	dma_addr_t link_speed_region_bus;
+	__be64 *link_speed_region;
+	int err;
+
+	link_speed_region =
+		dma_alloc_coherent(&priv->pdev->dev, sizeof(*link_speed_region),
+				   &link_speed_region_bus, GFP_KERNEL);
+
+	if (!link_speed_region)
+		return -ENOMEM;
+
+	memset(&gvnic_cmd, 0, sizeof(gvnic_cmd));
+	gvnic_cmd.opcode = cpu_to_be32(GVE_ADMINQ_REPORT_LINK_SPEED);
+	gvnic_cmd.report_link_speed.link_speed_address =
+		cpu_to_be64(link_speed_region_bus);
+
+	err = gve_adminq_execute_cmd(priv, &gvnic_cmd);
+
+	priv->link_speed = be64_to_cpu(*link_speed_region);
+	dma_free_coherent(&priv->pdev->dev, sizeof(*link_speed_region), link_speed_region,
+			  link_speed_region_bus);
+	return err;
+}
+
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.h b/drivers/net/ethernet/google/gve/gve_adminq.h
index 784830f75b7c..281de8326bc5 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.h
+++ b/drivers/net/ethernet/google/gve/gve_adminq.h
@@ -22,6 +22,7 @@ enum gve_adminq_opcodes {
 	GVE_ADMINQ_DECONFIGURE_DEVICE_RESOURCES	= 0x9,
 	GVE_ADMINQ_SET_DRIVER_PARAMETER		= 0xB,
 	GVE_ADMINQ_REPORT_STATS			= 0xC,
+	GVE_ADMINQ_REPORT_LINK_SPEED	= 0xD
 };
 
 /* Admin queue status codes */
@@ -181,6 +182,12 @@ struct gve_adminq_report_stats {
 
 static_assert(sizeof(struct gve_adminq_report_stats) == 24);
 
+struct gve_adminq_report_link_speed {
+	__be64 link_speed_address;
+};
+
+static_assert(sizeof(struct gve_adminq_report_link_speed) == 8);
+
 struct stats {
 	__be32 stat_name;
 	__be32 queue_id;
@@ -228,6 +235,7 @@ union gve_adminq_command {
 			struct gve_adminq_unregister_page_list unreg_page_list;
 			struct gve_adminq_set_driver_parameter set_driver_param;
 			struct gve_adminq_report_stats report_stats;
+			struct gve_adminq_report_link_speed report_link_speed;
 		};
 	};
 	u8 reserved[64];
@@ -255,4 +263,5 @@ int gve_adminq_unregister_page_list(struct gve_priv *priv, u32 page_list_id);
 int gve_adminq_set_mtu(struct gve_priv *priv, u64 mtu);
 int gve_adminq_report_stats(struct gve_priv *priv, u64 stats_report_len,
 			    dma_addr_t stats_report_addr, u64 interval);
+int gve_adminq_report_link_speed(struct gve_priv *priv);
 #endif /* _GVE_ADMINQ_H */
diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c
index 50cadf8755af..f5e18a6ceab2 100644
--- a/drivers/net/ethernet/google/gve/gve_ethtool.c
+++ b/drivers/net/ethernet/google/gve/gve_ethtool.c
@@ -59,7 +59,7 @@ static const char gve_gstrings_adminq_stats[][ETH_GSTRING_LEN] = {
 	"adminq_create_tx_queue_cnt", "adminq_create_rx_queue_cnt",
 	"adminq_destroy_tx_queue_cnt", "adminq_destroy_rx_queue_cnt",
 	"adminq_dcfg_device_resources_cnt", "adminq_set_driver_parameter_cnt",
-	"adminq_report_stats_cnt",
+	"adminq_report_stats_cnt", "adminq_report_link_speed_cnt"
 };
 
 static const char gve_gstrings_priv_flags[][ETH_GSTRING_LEN] = {
@@ -355,6 +355,7 @@ gve_get_ethtool_stats(struct net_device *netdev,
 	data[i++] = priv->adminq_dcfg_device_resources_cnt;
 	data[i++] = priv->adminq_set_driver_parameter_cnt;
 	data[i++] = priv->adminq_report_stats_cnt;
+	data[i++] = priv->adminq_report_link_speed_cnt;
 }
 
 static void gve_get_channels(struct net_device *netdev,
@@ -501,6 +502,16 @@ static int gve_set_priv_flags(struct net_device *netdev, u32 flags)
 	return 0;
 }
 
+static int gve_get_link_ksettings(struct net_device *netdev,
+				  struct ethtool_link_ksettings *cmd)
+{
+	struct gve_priv *priv = netdev_priv(netdev);
+	int err = gve_adminq_report_link_speed(priv);
+
+	cmd->base.speed = priv->link_speed;
+	return err;
+}
+
 const struct ethtool_ops gve_ethtool_ops = {
 	.get_drvinfo = gve_get_drvinfo,
 	.get_strings = gve_get_strings,
@@ -517,4 +528,5 @@ const struct ethtool_ops gve_ethtool_ops = {
 	.set_tunable = gve_set_tunable,
 	.get_priv_flags = gve_get_priv_flags,
 	.set_priv_flags = gve_set_priv_flags,
+	.get_link_ksettings = gve_get_link_ksettings
 };
-- 
2.28.0.526.ge36021eeef-goog


      parent reply	other threads:[~2020-09-08 18:39 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-08 18:39 [PATCH net-next v3 0/9] Add GVE Features David Awogbemila
2020-09-08 18:39 ` [PATCH net-next v3 1/9] gve: Get and set Rx copybreak via ethtool David Awogbemila
2020-09-08 18:39 ` [PATCH net-next v3 2/9] gve: Add stats for gve David Awogbemila
2020-09-08 18:39 ` [PATCH net-next v3 3/9] gve: Use dev_info/err instead of netif_info/err David Awogbemila
2020-09-08 18:39 ` [PATCH net-next v3 4/9] gve: Add support for dma_mask register David Awogbemila
2020-09-08 19:14   ` Jakub Kicinski
2020-09-09 22:12     ` David Awogbemila
2020-09-08 18:39 ` [PATCH net-next v3 5/9] gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags David Awogbemila
2020-09-08 19:17   ` Jakub Kicinski
2020-09-08 19:24   ` Jakub Kicinski
2020-09-09 22:12     ` David Awogbemila
2020-09-08 18:39 ` [PATCH net-next v3 6/9] gve: NIC stats for report-stats and for ethtool David Awogbemila
2020-09-08 18:39 ` [PATCH net-next v3 7/9] gve: Batch AQ commands for creating and destroying queues David Awogbemila
2020-09-08 18:39 ` [PATCH net-next v3 8/9] gve: Use link status register to report link status David Awogbemila
2020-09-08 19:27   ` Jakub Kicinski
2020-09-09 22:12     ` David Awogbemila
2020-09-08 18:39 ` David Awogbemila [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200908183909.4156744-10-awogbemila@google.com \
    --to=awogbemila@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=yangchun@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.