> Lorenzo Bianconi wrote:
> > This series introduce XDP multi-buffer support. The mvneta driver is
> > the first to support these new "non-linear" xdp_{buff,frame}. Reviewers
> > please focus on how these new types of xdp_{buff,frame} packets
> > traverse the different layers and the layout design. It is on purpose
> > that BPF-helpers are kept simple, as we don't want to expose the
> > internal layout to allow later changes.
> > 
> > For now, to keep the design simple and to maintain performance, the XDP
> > BPF-prog (still) only have access to the first-buffer. It is left for
> > later (another patchset) to add payload access across multiple buffers.
> > This patchset should still allow for these future extensions. The goal
> > is to lift the XDP MTU restriction that comes with XDP, but maintain
> > same performance as before.
> > 
> > The main idea for the new multi-buffer layout is to reuse the same
> > layout used for non-linear SKB. This rely on the "skb_shared_info"
> > struct at the end of the first buffer to link together subsequent
> > buffers. Keeping the layout compatible with SKBs is also done to ease
> > and speedup creating an SKB from an xdp_{buff,frame}. Converting
> > xdp_frame to SKB and deliver it to the network stack is shown in cpumap
> > code (patch 12/12).
> 
> Couple questions I think we want in the cover letter. How I read above
> is if mb is enabled every frame received at the end of the first buffer
> there will be skb_shared_info field.

setting mb bit the driver notifies the current xdp_frame is a "non-linear"
one and the skb_shared_info is properly populated. As you said below,
the info is per-frame, so we can receive linear frames (mb = 0) and
non-linear ones (mb = 1). For a linear frame we do not need to access
the skb_shared_info, so we will not introduce any penalty.

> 
> First just to be clear a driver may have mb support but the mb bit
> should only be used per frame so a frame with only a single buffer
> will not have any extra cost even when driver/network layer support
> mb. This way I can receive both multibuffer and single buffer frames
> in the same stack without extra overhead on single buffer frames. I
> think we want to put the details here in the cover letter so we don't
> have to read mvneta driver to learn these details. I'll admit we've
> sort of flung features like this with minimal descriptions in the
> past, but this is important so lets get it described here.

ack, I will add the info above in cover letter. Thanks for pointing this out.

> 
> Or put the details in the patch commits those are pretty terse for
> a new feature that has impacts for all xdp driver writers.
> > 
> > In order to provide to userspace some metdata about the non-linear
> > xdp_{buff,frame}, we introduced 2 bpf helpers:
> > - bpf_xdp_get_frag_count:
> >   get the number of fragments for a given xdp multi-buffer.
> > - bpf_xdp_get_frags_total_size:
> >   get the total size of fragments for a given xdp multi-buffer.
> > 
> > Typical use cases for this series are:
> > - Jumbo-frames
> > - Packet header split (please see Google���s use-case @ NetDevConf 0x14, [0])
> > - TSO
> > 
> > More info about the main idea behind this approach can be found here [1][2].
> > 
> > We carried out some throughput tests in order to verify we did not introduced
> > any performance regression adding xdp multi-buff support to mvneta:
> > 
> > offered load is ~ 1000Kpps, packet size is 64B
> > 
> > commit: 879456bedbe5 ("net: mvneta: avoid possible cache misses in mvneta_rx_swbm")
> > - xdp-pass:     ~162Kpps
> > - xdp-drop:     ~701Kpps
> > - xdp-tx:       ~185Kpps
> > - xdp-redirect: ~202Kpps
> > 
> > mvneta xdp multi-buff:
> > - xdp-pass:     ~163Kpps
> > - xdp-drop:     ~739Kpps
> > - xdp-tx:       ~182Kpps
> > - xdp-redirect: ~202Kpps
> 
> But these are fairly low rates?  Also why can't we push line rate
> here on xdp-tx and xdp-redirect, 1gbps should be no problem unless
> we have a very small core or something? Finally, can you explain

I am using a marvell EspressoBin to develop this feature.
The Espressobin runs a cortex a53 and it is not able to push line rate.
The tests above want to prove there is no penalty introducing xdp multi-buff
for linear case (I will point out clearly in the next cover-letter,
the tests above refer to linear case (mb = 0))

> why the huge hit between xdp-drop and xdp-tx?

not sure at the moment, the difference is not due to xdp multi-buff

> 
> I'm a bit wary of touching the end of a buffer on 40/100Gbps nic
> with DDIO and getting a cache miss. Do you have some argument why
> this wouldn't be the case? Do we need someone to step up with a
> 10/40/100gbps nic and implement the feature as well so we can verify
> this?

It would be interesting to have the implementation on a high-end device.
IIRC intel folks are working on it for AF_XDP.

Regards,
Lorenzo

> 
> > 
> > This series is based on "bpf: cpumap: remove rcpu pointer from cpu_map_build_skb signature"
> > https://patchwork.ozlabs.org/project/netdev/patch/33cb9b7dc447de3ea6fd6ce713ac41bca8794423.1601292015.git.lorenzo@kernel.org/
> > 
> > Changes since v2:
> > - add throughput measurements
> > - drop bpf_xdp_adjust_mb_header bpf helper
> > - introduce selftest for xdp multibuffer
> > - addressed comments on bpf_xdp_get_frag_count
> > - introduce xdp multi-buff support to cpumaps
> > 
> > Changes since v1:
> > - Fix use-after-free in xdp_return_{buff/frame}
> > - Introduce bpf helpers
> > - Introduce xdp_mb sample program
> > - access skb_shared_info->nr_frags only on the last fragment
> > 
> > Changes since RFC:
> > - squash multi-buffer bit initialization in a single patch
> > - add mvneta non-linear XDP buff support for tx side
> > 
> > [0] https://netdevconf.info/0x14/pub/slides/62/Implementing%20TCP%20RX%20zero%20copy.pdf
> > [1] https://github.com/xdp-project/xdp-project/blob/master/areas/core/xdp-multi-buffer01-design.org
> > [2] https://netdevconf.info/0x14/pub/slides/10/add-xdp-on-driver.pdf (XDPmulti-buffers section)
> > 
> > Lorenzo Bianconi (10):
> >   xdp: introduce mb in xdp_buff/xdp_frame
> >   xdp: initialize xdp_buff mb bit to 0 in all XDP drivers
> >   net: mvneta: update mb bit before passing the xdp buffer to eBPF layer
> >   xdp: add multi-buff support to xdp_return_{buff/frame}
> >   net: mvneta: add multi buffer support to XDP_TX
> >   bpf: move user_size out of bpf_test_init
> >   bpf: introduce multibuff support to bpf_prog_test_run_xdp()
> >   bpf: add xdp multi-buffer selftest
> >   net: mvneta: enable jumbo frames for XDP
> >   bpf: cpumap: introduce xdp multi-buff support
> > 
> > Sameeh Jubran (2):
> >   bpf: helpers: add multibuffer support
> >   samples/bpf: add bpf program that uses xdp mb helpers
> > 
> >  drivers/net/ethernet/amazon/ena/ena_netdev.c  |   1 +
> >  drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c |   1 +
> >  .../net/ethernet/cavium/thunder/nicvf_main.c  |   1 +
> >  .../net/ethernet/freescale/dpaa2/dpaa2-eth.c  |   1 +
> >  drivers/net/ethernet/intel/i40e/i40e_txrx.c   |   1 +
> >  drivers/net/ethernet/intel/ice/ice_txrx.c     |   1 +
> >  drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   1 +
> >  .../net/ethernet/intel/ixgbevf/ixgbevf_main.c |   1 +
> >  drivers/net/ethernet/marvell/mvneta.c         | 131 +++++++------
> >  .../net/ethernet/marvell/mvpp2/mvpp2_main.c   |   1 +
> >  drivers/net/ethernet/mellanox/mlx4/en_rx.c    |   1 +
> >  .../net/ethernet/mellanox/mlx5/core/en_rx.c   |   1 +
> >  .../ethernet/netronome/nfp/nfp_net_common.c   |   1 +
> >  drivers/net/ethernet/qlogic/qede/qede_fp.c    |   1 +
> >  drivers/net/ethernet/sfc/rx.c                 |   1 +
> >  drivers/net/ethernet/socionext/netsec.c       |   1 +
> >  drivers/net/ethernet/ti/cpsw.c                |   1 +
> >  drivers/net/ethernet/ti/cpsw_new.c            |   1 +
> >  drivers/net/hyperv/netvsc_bpf.c               |   1 +
> >  drivers/net/tun.c                             |   2 +
> >  drivers/net/veth.c                            |   1 +
> >  drivers/net/virtio_net.c                      |   2 +
> >  drivers/net/xen-netfront.c                    |   1 +
> >  include/net/xdp.h                             |  31 ++-
> >  include/uapi/linux/bpf.h                      |  14 ++
> >  kernel/bpf/cpumap.c                           |  45 +----
> >  net/bpf/test_run.c                            |  45 ++++-
> >  net/core/dev.c                                |   1 +
> >  net/core/filter.c                             |  42 ++++
> >  net/core/xdp.c                                | 104 ++++++++++
> >  samples/bpf/Makefile                          |   3 +
> >  samples/bpf/xdp_mb_kern.c                     |  68 +++++++
> >  samples/bpf/xdp_mb_user.c                     | 182 ++++++++++++++++++
> >  tools/include/uapi/linux/bpf.h                |  14 ++
> >  .../testing/selftests/bpf/prog_tests/xdp_mb.c |  77 ++++++++
> >  .../selftests/bpf/progs/test_xdp_multi_buff.c |  24 +++
> >  36 files changed, 691 insertions(+), 114 deletions(-)
> >  create mode 100644 samples/bpf/xdp_mb_kern.c
> >  create mode 100644 samples/bpf/xdp_mb_user.c
> >  create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_mb.c
> >  create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_multi_buff.c
> > 
> > -- 
> > 2.26.2
> > 
> 
>